EMERGENCY LIGHTING W O R K L A M P S 4 4 H A N D H E L D S P O T L A M P S 6 3 F L U O R E S C E N T I N S P E C T I O N 6 4 L A M P S

Size: px
Start display at page:

Download "EMERGENCY LIGHTING W O R K L A M P S 4 4 H A N D H E L D S P O T L A M P S 6 3 F L U O R E S C E N T I N S P E C T I O N 6 4 L A M P S"

Transcription

1 EMERGENCY LIGHTING W O R K L A M P S 4 4 H A N D H E L D S P O T L A M P S 6 3 F L U O R E S C E N T I N S P E C T I O N 6 4 L A M P S L. E. D I N S P E C T I O N L A M P S 6 6 R O TAT I N G B E A C O N S 6 8 S T R O B E L I G H T S 7 3 L. E. D S T R O B E L I G H T S 8 L. E. D W A R N I N G L I G H T S 8 2 L. E. D A R R O W B A R 8 5 M I N I B A R S 8 6 L. E. D M I N I B A R S 8 7 L I G H T B A R S 8 9 L. E. D L I G H T B A R S 9 2

2 DOUBLE BEAM WORK LAMPS Designed to give maximum light output, the double beam work lamps feature dual free form reflectors to provide a light volume comparable with three conventional lamps. In all, there are eight models with a selection of beam patterns (wide flood, concentrated flood or long range spread beam). The oval units offer light performance equal to the original lamp in a sleek and stylish new housing. The new surface mount version can be mounted directly to an external cabin or vehicle body with a 27 degree downward angle to create a pool of light at a vehicle exit point or work area. The traditional lamps can be purchased with or without a top mounted handle and waterproof switch. Pedestal brackets are included to extend the overall height and provide 36 rotation with forward and backward tilt Blister Pack Oval Double Beam Work Lamp Wide Flood Beam Features: impact resistant ABS plastic housing (IP64), weatherproof boot for cable connection, mounting hardware and optional pedestal mounting bracket to extend overall height and provide 36 rotation with forward and backward tilt Includes: 2 x fitted 12V H3 55W globes (P/No ), brass terminals with insulators and weatherproof boot NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globes P/No NB: To use lamps in 24V applications order 24V H3 7W globes P/No Blister Pack Oval Double Beam Work Lamp Long Range Spread Beam Features: impact resistant ABS plastic housing (IP64), weatherproof boot for cable connection, mounting hardware and optional pedestal mounting bracket to extend overall height and provide 36 rotation with forward and backward tilt Includes: 2 x fitted 12V H3 55W globes (P/No ), brass terminals with insulators and weatherproof boot NB: To order replacement lens and reflector use P/No

3 DOUBLE BEAM WORK LAMPS 724 Blister Pack Double Beam Work Lamp Wide Flood Beam Features: impact resistant ABS plastic housing, mounting hardware and optional pedestal bracket to extend overall height and provide 36 rotation with forward and backward tilt Includes: 2 x fitted 12V H3 55W globes (P/No ) NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globes P/No Blister Pack Double Beam Work Lamp Concentrated Flood Beam Features: impact resistant ABS plastic housing, mounting hardware and optional pedestal bracket to extend overall height and provide 36 rotation with forward and backward tilt Includes: 2 x fitted 12V H3 55W globes (P/No ) NB: To order lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globes P/No. 487 NB: To use lamps in 24V applications order 24V H3 7W globes P/No Blister Pack Double Beam Work Lamp Long Range Spread Beam Features: impact resistant ABS plastic housing, mounting hardware and optional pedestal bracket to extend overall height and provide 36 rotation with forward and backward tilt Includes: 2 x fitted 12V H3 55W globes (P/No ) NB: To order replacement lens and reflector use P/No

4 DOUBLE BEAM WORK LAMPS 7244 Blister Pack Double Beam Work Lamp Wide Flood Beam Features: impact resistant ABS plastic housing, waterproof rocker switch, top mounted handle, mounting hardware and optional pedestal bracket to extend overall height and provide 36 rotation with forward and backward tilt Includes: 2 x fitted 12V H3 55W globes (P/No ) NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globes P/No Blister Pack Double Beam Work Lamp Long Range Spread Beam Features: impact resistant ABS plastic housing, waterproof rocker switch, top mounted handle, mounting hardware and optional pedestal bracket to extend overall height and provide 36 rotation with forward and backward tilt Includes: 2 x fitted 12V H3 55W globes (P/No ) NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globes P/No Surface Mount Double Beam Work Lamp Wide Flood Beam Positioned on a 27 downward angle to create a pool of light at the vehicle exit points and work zones. Ideal for emergency vehicles such as ambulances and the interior of enclosed truck bodies 3 NB: To use lamps in 24V applications order 24V H3 7W globes P/No Includes: 2 x fitted 12V H3 55W globes (P/No ) NB: To order replacement lens and reflector use P/No

5 WORK LAMPS 7242 Blister Pack Stingray Watertight Work Lamp Wide Flood Beam Features: impact resistant ABS housing, free form reflector technology and watertight seal (IP66) Includes: fitted 12V H3 55W globe (P/No ) NB: To order replacement lens and reflector use P/No To order pedestal mounting bracket use P/No NB: To use lamps in 24V applications order 24V H3 7W globe P/No Blister Pack Stingray Watertight Deck Lamp Wide Flood Beam Features: impact resistant ABS housing, stainless steel fittings, free form reflector technology and watertight seal (IP66) Includes: fitted 12V H3 55W globe (P/No ) NB: to order replacement lens and reflector use P/No To order stainless steel pedestal mounting bracket use P/No NB: To use lamps in 24V applications order 24V H3 7W globe P/No NB: Not suitable for 24V use 7249 Blister Pack Utility Work Lamp, Flood Beam mm Diameter Features: impact resistant nylon/fibre housing and pre-wired terminated cables for easy installation Includes: fitted 12V H3 55W globe (P/No ) NB: To order replacement lens and reflector use P/No

6 WORK LAMPS 724 Work Lamp, Flood Beam x mm Square Features: matt black body with watertight seal (IP67) and hermetic plug (H3 globe not included)* NB: To order replacement lens and reflector use P/No *H3 55W or 7W globe not included. To order 12V use P/No or 24V use P/No Blister Pack Work Lamp, Free Form Long Range Flood Beam Features: free form reflector technology for increased light output, matt black body with weatherproof seal (IP65), weatherproof boot for cable connection Includes: fitted 12V H3 55W globe (P/No ), brass terminals with insulators and weatherproof boot NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globe P/No HID Xenon H.I.D Work Lamp, Free Form Long Range Flood Beam Combines Xenon H.I.D and free form reflector technology to produce superior light output. An internally mounted ballast makes it ideal for all work environments. The unique heavy-duty vibration resistant bracket allows the lamp to be fixed to almost any angle to suit a variety of applications. Includes weatherproof boot and pre-wired cable connection Fitted with 12/24V D1S 35W globe (P/No. 4934) and 12V ballast (P/No ) D1 H.I.D technology Internally mounted Gen 5 ballast Versatile heavy-duty mounting bracket Free form reflector technology IP67 rated NB: To order replacement lens and reflector use P/No

7 WORK LAMPS Work Lamp, Flood Beam Features: matt black body fitted with off/on rocker switch, adjustment handle and anti-vibration bracket (H3 globe not included)* NB: To order replacement lens and reflector use P/No *H3 55W or 7W globe not included. To order 12V use P/No or 24V use P/No Work Lamp, Flood Beam with Magnetic Base As above with magnetic base, suction pads, cigarette lighter plug and 3 metre spiral lead (H3 globe not included)* NB: To order replacement lens and reflector use P/No *H3 55W or 7W globe not included. To order 12V use P/No or 24V use P/No. 487 NB: To use lamps in 24V applications order 24V H3 7W globe P/No Multi-Position Work Lamp Flood Beam Features: impact resistant nylon/fibre housing, 3mm pre-wired cable and versatile mounting bracket that allows the lamp to mount in multiple positions with unique tilt adjustment to provide light in any direction Includes: fitted 12V H3 55W globe (P/No ) NB: To order replacement lens and reflector use P/No

8 WORK LAMPS Dual Purpose Work Lamp Flood Beam Features: impact resistant nylon/fibre housing and 3mm pre-wired cable. Ideal for vertical pillar (materials handling) or horizontal (agriculture) mounting Includes: fitted 12V H3 55W globe (P/No ) NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globe P/No Work Lamp, Flood Beam with Protective Grille Features: impact resistant ABS housing and protective grille, top mounted handle, off/on rocker switch and anti-vibration bracket (H3 globe not included)* NB: To order replacement lens and reflector use P/No *H3 55W or 7W globe not included. To order 12V use P/No or 24V use P/No *H3 55W or 7W globe not included. To order 12V use P/No or 24V use P/No Polycarbonate Work Lamp Flood Beam Features: impact resistant ABS housing with watertight seal (IP66), virtually indestructible polycarbonate lens and optional pedestal mounting bracket. Suitable for tanker and food transport applications where polycarbonate lenses are required (H3 globe not included)* NB: To order replacement lens and reflector use P/No

9 WORK LAMPS Polycarbonate Work Lamp Flood Beam Features: impact resistant ABS housing with watertight seal (IP66), top mounted handle, off/on waterproof toggle switch, virtually indestructible polycarbonate lens and optional pedestal mounting bracket. Suitable for transport applications where polycarbonate lenses are required (H3 globe not included)* NB: To order replacement lens and reflector use P/No *H3 55W or 7W globe not included. To order 12V use P/No or 24V use P/No Work Lamp, Flood Beam Features: impact resistant ABS housing with off/on rocker switch protected by a waterproof rubber boot, top mounted handle and multiple-point mounting bracket (H3 globe not included)* NB: To order replacement lens and reflector use P/No *H3 55W or 7W globe not included. To order 12V use P/No or 24V use P/No. 487 NB: To use lamps in 24V applications order 24V H3 7W globe P/No Work Lamp, Flood Beam Features: impact resistant nylon/fibre housing and 3mm pre-wired cable. A tough and powerful lamp ideal for agricultural and earth moving applications Includes: fitted 12V H3 55W globe (P/No ) NB: To order replacement lens and reflector use P/No

10 SENATOR WORK LAMPS A robust yet stylish housing with ergonomically moulded handle is the signature feature of the new Senator work lamps. Made of fibre reinforced nylon, the housings are designed to withstand harsh work environments. The glass is toughened to operate over long periods of time and has a wide, even flood beam pattern for superior illumination. Available in halogen or H.I.D (High Intensity Discharge) the lamps utilise the latest D1 globes and compact Gen 5 ballasts. All lamps feature a waterproof rocker switch and optional pedestal brackets are included to extend the overall height and provide 36 rotation with forward and backward tilt. IP Rating: IP Senator Work Lamp, Flood Beam Features: fibre reinforced nylon housing, ergonomically moulded handle, stainless steel mounting hardware, off/on rocker switch with weatherproof rubber boot and 3mm pre-wired cable Includes: fitted 12V H3 55W globe (P/No ) NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globe P/No HID Senator Xenon H.I.D Work Lamp 12 Volt 35W Flood Beam Features: Xenon H.I.D D1 technology to produce superior light output, internally mounted Gen 5 ballast, ergonomically moulded handle, stainless steel mounting hardware, fibre reinforced nylon housing, off/on rocker switch with weatherproof rubber boot and 3mm pre-wired cable Includes: fitted 12V ballast (P/No ) and 12/24V D1S 35W globe (P/No. 4934) D1 H.I.D technology Internally mounted Gen 5 ballast Pre-wired with 3mm cable HID-24 As Above 24V Flood Beam With 24V ballast (P/No ) NB: To order replacement lens and reflector use P/No

11 SENATOR WORK LAMPS Senator Work Lamp, Spot Beam Features: fibre reinforced nylon housing, ergonomically moulded handle, stainless steel mounting hardware, off/on rocker switch with weatherproof rubber boot and 3mm pre-wired cable Includes: fitted 12V H3 55W globe (P/No ) NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globe P/No HID Senator Xenon H.I.D Work Lamp 12 Volt 35W Spot Beam Features: Xenon H.I.D D1 technology to produce superior light output, internally mounted Gen 5 ballast, ergonomically moulded handle, stainless steel mounting hardware, fibre reinforced nylon housing, off/on rocker switch with weatherproof rubber boot and 3mm pre-wired cable Includes: fitted 12V ballast (P/No ) and 12/24V D1S 35W globe (P/No. 4934) D1 H.I.D technology Internally mounted Gen 5 ballast Pre-wired with 3mm cable 72437HID-24 As Above 24V Spot Beam With 24V ballast (P/No ) NB: To order replacement lens and reflector use P/No

12 SENATOR WORK LAMPS Senator Work Lamp, Flood Beam with Magnetic Base Features: fibre reinforced nylon housing, ergonomically moulded handle, off/on rocker switch with weatherproof rubber boot and cigarette lighter plug with 2m spiral lead. The magnetic base features suction pads to prevent the magnet from scratching the vehicle surface Includes: fitted 12V H3 55W globe (P/No ) NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globe P/No HID Senator Xenon H.I.D Work Lamp 12 Volt 35W Flood Beam with Magnetic Base Features: Xenon H.I.D D1 technology to produce superior light output, internally mounted Gen 5 ballast, ergonomically moulded handle, fibre reinforced nylon housing, off/on rocker switch with weatherproof rubber boot and cigarette lighter plug with 2m spiral lead. The magnetic base features suction pads to prevent the magnet from scratching the vehicle surface Includes: fitted 12V ballast (P/No ) and 12/24V D1S 35W globe (P/No. 4934) D1 H.I.D technology Internally mounted Gen 5 ballast Magnetic base with 2m spiral lead and lighter plug NB: To order replacement lens and reflector use P/No

13 RUBBER BODY WORK LAMPS With the use of heavy-duty rubber housings, these lamps are resistant to sudden impact and prolonged vibration, making them well suited to rugged work environments such as agriculture, mining, construction and earth moving. These simple, yet durable designs make rubber body work lamps versatile and cost effective. Narva rubber body work lamps are available in sealed beam or replaceable halogen globe versions with a wide variety of beam pattern options Blister Pack Luminator Rubber Body Work Lamp 12 Volt 55W Halogen Flood Beam Features: replaceable 12V H3 55W halogen globe (P/No ) in a shock resistant neoprene housing NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globe P/No Blister Pack Luminator Rubber Body Work Lamp 12 Volt 55W Halogen Spot Beam Features: replaceable 12V H3 55W halogen globe (P/No ) in a shock resistant neoprene housing NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globe P/No

14 RUBBER BODY WORK LAMPS Rubber Body Work Lamp 12 Volt 55W Halogen Flood Beam Fitted with replaceable 12V H3 55W halogen globe. Unique heavy-duty rubber body protects the lens and reflector from external shock, vibration and damage. Can be upright or pendant mounted NB: To order replacement lens and reflector use P/No NB: To use lamps in 24V applications order 24V H3 7W globe P/No Rubber Body Work Lamp 12 Volt 6W Sealed Flood Beam Features: unique heavy-duty rubber body that protects the sealed beam from external shock, vibration and damage. Can be upright or pendant mounted NB: To order replacement sealed beam use P/No As above with 24 Volt 6W Sealed Flood Beam NB: To order replacement sealed beam use P/No Rubber Housing with Sealed Beam Connector Heavy-duty rubber body suitable for use with 5 3 /4 (146mm) sealed and semi sealed beams

15 RUBBER BODY WORK LAMPS 7245 Rubber Body Work Lamp 12 Volt 35W Sealed Tractor (Trapezoidal) Beam Features: heavy-duty rubber body that protects the par 36 sealed beam from shock and vibration. Can be upright or pendant mounted NB: To order replacement sealed beam use P/No As above with 24 Volt 5W Sealed Beam NB: To order replacement sealed beam use P/No Rubber body and mounting hardware to suit P/No.s 7245, Grommet Mounted Work Lamp 12 Volt 35W Sealed Tractor (Trapezoidal) Beam Features: a par 36 sealed beam flush mounted in a P/No. 948 grommet. Ideal for use as an in-built flood lamp, work lamp or supplementary reversing lamp NB: To order replacement sealed beam use P/No PLATE THICKNESS Grommet Hole Sizes As above with 24 Volt 5W Sealed Beam NB: To order replacement sealed beam use P/No HOLE SIZE Rubber Body Work Lamp 12 Volt 5W Halogen Sealed Tractor Beam Features: unique rectangular heavy-duty rubber body that protects the sealed beam from shock, vibration and external damage. Can be upright or pendant mounted NB: To order replacement sealed beam use P/No As above with Medium Flood Beam NB: To order replacement sealed beam use P/No As above with Wide Flood Beam NB: To order replacement sealed beam use P/No

16 L.E.D WORK LAMPS A first in the extensive Narva work lamp range, this lamp features L.E.D technology designed for flood lighting to see, as opposed to traditional technology that is designed to be seen such as trailer lighting. This new technology delivers an outstanding 5 lumen output and creates a more even and whiter light when compared with the sealed beam equivalent, P/No rubber body work lamp. The whiter light from L.E.D puts less strain on the eye, increasing safety when used for long periods of time. The use of L.E.Ds means there is no filament to break, therefore increasing reliability and service life. Combined with the die-cast powder coated aluminium housing, virtually unbreakable polycarbonate lens, stainless steel fittings and over voltage protection, this makes the lamp ideal for the most rugged work 6 63 environments. The low current draw of L.E.D puts less strain on the battery and leaves more power for other vehicle requirements. 147 IP Rating: IP LED 12 Volt L.E.D Work Lamp Trapezoidal Beam Features: the latest in L.E.D technology to deliver a superior whiter and brighter light output. Pre-wired with die-cast powder coated aluminium housing (IP66) 5 lumen output Virtually unbreakable polycarbonate lens Includes stainless steel mounting hardware Won t drain your battery, only 1.2A current draw Operates at full brightness between V Overvoltage protection at 17 18V 72452LED As above 24V.5A current draw at 24V, operates at full brightness between 21 34V with overvoltage protection at 34 36V 7245LEDW 12 Volt L.E.D Deck Lamp Trapezoidal Beam Features: the latest in sealed L.E.D technology making it ideal for marine applications. Pre-wired with die-cast powder coated aluminium housing (IP66) 5 lumen output Virtually unbreakable polycarbonate lens Includes stainless steel mounting hardware Won t drain your battery, only 1.2A current draw Operates at full brightness between V Overvoltage protection at 17 18V 72452LEDW As above 24V.5A current draw at 24V, operates at full brightness between 21 34V with overvoltage protection at 34 36V 58

17 TITAN XENON H.I.D WORK LAMPS Specifically designed for heavy-duty applications such as mining, earth moving, forestry, and construction. The Titan lamps feature a heavy-duty mounting bracket with shock absorbing mechanism that dampens shock and absorbs vibration. The supporting plate and bracket is stainless steel with nyloc nuts while the housing is made of fibre reinforced nylon with internal seal to keep out water and dust. The glass is especially hardened to withstand the dramatic changes in temperature often occurring from pressure washing after prolonged use or conditions associated with snow and ice. The extraordinary performance of Titan H.I.D is further enhanced with the internally mounted Gen 5 ballast technology from Osram Germany that starts the D1 globe quicker and has a faster warm up period than the earlier D2 technology. The globe provides more than 3, hours of life which is five times that of a halogen globe and three times the amount of light with less power consumption. H.I.D is much whiter than halogen lighting and closer to the natural colour of daylight at 4,15 o K (Kelvin), making it more comfortable on the eyes. Titan is the ultimate work horse for an extreme environment, providing durability and extraordinary illumination. 135 Technical Data 197 Operating Temperature: min 4 C, max +7 C IP Rating: IP 65 Current Draw at start up: 16A at 12V, A at 24V Continuous Draw: 3.6A at 12V, 1.8A at 24V 7247 Titan Xenon H.I.D Work Lamp 12 Volt 35W Flood Beam Features: D1 technology to produce superior light output, internally mounted Gen 5 ballast, impact resistant nylon/fibre housing and heavy-duty mounting bracket with shock absorbing mechanism. Supplied pre-wired with weatherproof cable exit Includes: fitted 12V ballast (P/No ) and 12/24V D1S 35W globe (P/No. 4934) As Above 24V Flood Beam With 24V ballast (P/No ) NB: To order replacement lens and reflector use P/No Titan Xenon H.I.D Work Lamp 12 Volt 35W Spot Beam Features: D1 technology to produce superior light output, internally mounted Gen 5 ballast, impact resistant nylon/fibre housing and heavy-duty mounting bracket with shock absorbing mechanism. Supplied pre-wired with weatherproof cable exit Includes: fitted 12V ballast (P/No ) and 12/24V D1S 35W globe (P/No. 4934) As Above 24V Spot Beam With 24V ballast (P/No ) NB: To order replacement lens and reflector use P/No

18 GAMMA XENON H.I.D WORK LAMPS The Gamma Xenon H.I.D (High Intensity Discharge) lamp is designed for rugged environments such as mining, earth moving, construction, agriculture, ports, forestry, etc. An aluminium alloy housing and internally mounted Gen 5 ballast utilises a xenon gas discharge globe, making Gamma resistant to shock and vibration. The globe life is around 3 hours, five times that of a conventional halogen globe. The light from an H.I.D lamp is produced by an arc in a xenon gas filled envelope, in comparison to a halogen globe, where electricity passes through a filament making it illuminate. With no filament to break, H.I.D lighting eliminates the effects of shock and vibration. H.I.D lighting is very energy efficient, producing 3 times the light with low power consumption. A colour temperature of 415 K (Kelvin) is close to daylight, making it more comfortable on your eyes, reducing eye strain and increasing safety. Not only is the illuminated area brighter, but larger as well. Technical Data Fuse Protection: 2A for 12V, A for 24V Operating Temperature: min 4 C, max +7 C IP Rating: IP 65 Lens: Hardened glass Lamp Adjustment: Vertical +/-3, Horizontal +/- 2 Current Draw at start up: 16A at 12V, A at 24V Continuous Draw: 3.6A at 12V, 1.8A at 24V P/No Optional extras Extreme vibration bracket (74154), Anti-theft torx bolts (74158) and torx bit (74159) Gamma Xenon H.I.D. Work Lamp 12 Volt 35W Trapezoidal Beam Now features: D1 H.I.D technology Includes: 12/24V D1S 35W globe (P/No. 4934), in-built 12V Gen 5 ballast (P/No ), all aluminium alloy housing and mounting spacer As above, 24 Volt Trapezoidal Beam With 24V ballast (P/No ) NB: To order replacement lens use P/No NB: To convert early Gamma lamps to D1 Gen 5 ballast technology use 12V P/No or 24V P/No NB: To convert early Gamma lamps to D1 Gen 5 ballast technology use 12V P/No or 24V P/No Gamma Xenon H.I.D. Work Lamp 12 Volt 35W Concentrated Flood Beam Now features: D1 H.I.D technology Includes: 12/24V D1S 35W globe (P/No. 4934), in-built 12V Gen 5 ballast (P/No ), all aluminium alloy housing and mounting spacer As above, 24 Volt Concentrated Flood Beam With 24V ballast (P/No ) NB: To order replacement lens use P/No. 7465

19 WORK LAMPS Gamma Xenon H.I.D. Work Lamp 12 Volt 35W Wide Flood Beam Now features: D1 H.I.D technology Includes: 12/24V D1S 35W globe (P/No. 4934), in-built 12V Gen 5 ballast (P/No ), all aluminium alloy housing and mounting spacer As above, 24 Volt Wide Flood Beam With 24V ballast (P/No ) NB: To order replacement lens use P/No NB: To convert early Gamma lamps to D1 Gen 5 ballast technology use 12V P/No or 24V P/No Gamma Xenon H.I.D. Work Lamp 12 Volt 35W Broad Beam Now features: D1 H.I.D technology Includes: 12/24V D1S 35W globe (P/No. 4934), in-built 12V Gen 5 ballast (P/No ), all aluminium alloy housing and mounting spacer As above, 24 Volt Broad Beam With 24V ballast (P/No ) NB: To order replacement lens use P/No NB: To convert early Gamma lamps to D1 Gen 5 ballast technology use 12V P/No or 24V P/No Gamma Xenon H.I.D. Work Lamp 12 Volt 35W Spot Beam Now features: D1 H.I.D technology Includes: 12/24V D1S 35W globe (P/No. 4934), in-built 12V Gen 5 ballast (P/No ), all aluminium alloy housing and mounting spacer NB: To convert early Gamma lamps to D1 Gen 5 ballast technology use 12V P/No or 24V P/No As above, 24 Volt Spot Beam With 24V ballast (P/No ) NB: To order replacement lens use P/No

20 GAMMA MICRO XENON H.I.D WORK LAMPS The Gamma Micro Xenon H.I.D (High Intensity Discharge) lamp combines function and quality with modern design while retaining all the performance benefits of the larger Gamma H.I.D lamp. Gamma Micro is equipped with the D1S 35W gas discharge bulb and internally mounted Gen 5 ballast, making it the smallest H.I.D lamp on the market with this feature. The housing is constructed of extruded aluminium that provides extraordinary strength. The lens is made of hardened glass for higher heat resistance Technical Data: IP Rating: IP Current Draw at Start up: 16A at 12V, A at 24V Continuous Draw: 3.6A at 12V, 1.8A at 24V 7249 Gamma Micro Xenon H.I.D Work Lamp 12 Volt 35W Spot Beam Now features: D1 H.I.D technology Includes: 12/24V D1S 35W globe (P/No. 4934), in-built 12V Gen 5 ballast (P/No ), extruded aluminium housing and mounting bracket As above, 24 Volt Spot Beam With 24V ballast (P/No ) NB: To order replacement lens use P/No NB: To convert early Gamma lamps to D1 Gen 5 ballast technology use 12V P/No or 24V P/No Gamma Micro Xenon H.I.D Work Lamp 12 Volt 35W Medium Flood Beam Now features: D1 H.I.D technology Includes: 12/24V D1S 35W globe (P/No. 4934), in-built 12V Gen 5 ballast (P/No ), extruded aluminium housing and mounting bracket As above, 24 Volt Medium Flood Beam With 24V ballast (P/No ) NB: To order replacement lens use P/No NB: To convert early Gamma lamps to D1 Gen 5 ballast technology use 12V P/No or 24V P/No NB: To convert early Gamma lamps to D1 Gen 5 ballast technology use 12V P/No or 24V P/No Gamma Micro Xenon H.I.D Work Lamp 12 Volt 35W Wide Flood Beam Now features: D1 H.I.D technology Includes: 12/24V D1S 35W globe (P/No. 4934), in-built 12V Gen 5 ballast (P/No ), extruded aluminium housing and mounting bracket As above, 24 Volt Wide Flood Beam With 24V ballast (P/No ) NB: To order replacement lens use P/No. 7477

21 HANDHELD SPOT LAMPS 72BL Blister Pack 12 Volt L.E.D Map Light with Cigarette Lighter Plug Features: 4cm flexible arm and off/on rocker switch with power on indicator 7 Colt Off/On Handheld Spotlight Has a powerful W concentrated beam in a robust blue and black housing with an ergonomically moulded handle. Ideal for emergency, off road, trucking and camping Fitted with a powerful 12V H3 W globe (For 24V application use globe P/No ) Off/On rocker switch for comfortable single handed operation 3.5 metres of spiral lead with a unique pistol grip cigarette lighter plug and L.E.D power on indicator Hook to hang lamp in under bonnet or camping applications NB: To order replacement lens and reflector use P/No As above with Grey Housing and Off/Momentary (On) Switch Ideal where use is frequent and intermittent NB: To order replacement lens and reflector use P/No

22 SEE EZY Still featuring the ever reliable Australian made fluorescent and incandescent inspection lamps, the See Ezy range has expanded to feature the more advanced L.E.D units. With the recent advances made in L.E.D lighting, inspection lamps have entered a new era. Cordless versions with rechargeable batteries are now available thanks to the low current draw of L.E.D technology. The range includes a compact unit (P/No. 7132) that comes with both 12V and 24V chargers, is ideal for tool and glove box storage and suitable for hiking and tradesmen. The larger units are available in two versions, one with 4 hours of battery life (P/No ), and the 7132 premium unit that not only features 8 hours of battery life but a 24V docking station with charge indicator making it ideal for workshops and home garages. All L.E.D lamps feature NiMH battery packs that do not create a charge memory meaning that charging can take place at any time without concern for reducing the battery life. 712 Blister Pack See Ezy 24 Volt Fluorescent Inspection Light Fitted with 8 metre double insulated lead, 11 watt fluorescent tube and 3 pin plug/ballast. Features shock resistant rubber body and virtually unbreakable polycarbonate tube Versatile spring steel hanging hook Ultra bright 9 lumens Rubber body resistant to petrol and oil Low heat output, safe for use around fuel and chemicals Complies with AS/NZS 3118, Approval No. N Blister Pack See Ezy 12 Volt Fluorescent Inspection/Leisure Light Fitted with an 8 metre double insulated lead, in-line switch, cigarette lighter plug and battery clips adaptor for direct battery connection. Features shock resistant rubber body and virtually unbreakable polycarbonate tube Versatile spring steel hanging hook Ultra bright 8 lumens Won t drain your battery, only 1A current draw Rubber body resistant to petrol and oil 64

23 SEE EZY Blister Pack See Ezy 24 Volt Fluorescent Inspection/Leisure Light Fitted with an 8 metre double insulated lead, in-line switch, cigarette lighter plug and battery clips adaptor for direct battery connection. Features shock resistant rubber body and virtually unbreakable polycarbonate tube Versatile spring steel hanging hook Ultra bright 8 lumens Won t drain your battery, only.5a current draw Rubber body resistant to petrol and oil 7125 Blister Pack See Ezy 24 Volt Incandescent Inspection Light Heavy-duty construction, ideal for workshops, commercial sites, plumbing, electrical and maintenance. Fitted with 4.5 metre double insulated lead, 2 pin plug, convenient hanging hook and reflector for improved light output and direction Approved for use with 6 or W globes (Approval No. Q3) Blister Pack See Ezy 24 Volt Incandescent Inspection Light with Switch (globe not included) Fitted with 4.5 metre double insulated lead, 2 pin plug, off/on switch, convenient hanging hook and reflector for improved light output and direction Approved for use with 6 or W globes (Approval No. Q3) Spare parts to suit See Ezy Fluorescent & Incandescent Lights P/No P/No P/No V ballast to suit V circuit board to suit V circuit board to suit Protective tube to suit all fluorescent lamps Hanging hook to suit all fluorescent lamps Spring clip to suit all fluorescent lamps 7128 Wire guard and clamp to suit 7125 and V 11W fluorescent tube to suit /24V 11W fluorescent tube to suit 712 and V 6W BC Clear rough construction globe V W BC Clear rough construction globe 65

24 SEE EZY L.E.D 7132 See Ezy Compact Rechargeable L.E.D Inspection Light A compact cordless unit ideal for on-the-job requirements and small enough for tool or glove box storage. The rechargeable NiMH battery delivers 4 hours of continuous operation from 15 high intensity L.E.Ds. The durable weatherproof body features a shatterproof polycarbonate lens, convenient integral belt clip and off/on switch with weatherproof rubber boot. Included is a 24V AC charger and 12V DC charger 4 hours of use at 45 lumens peak output NiMH battery with no memory effect 24V AC and 12V DC chargers supplied Weatherproof body and switch Spare Parts to suit V charger to suit V charger to suit Lamp only with battery See Ezy Rechargeable L.E.D Inspection Light Delivering 4 hours of continuous use, the cordless lamp can be recharged from either 24V AC, 12V or 24V DC. The durable rubber housing is shock and weather resistant and features an integrated off/on switch and hanging hook. The body is resistant to oils and grease and features a shatterproof polycarbonate lens. An in-built L.E.D indicator glows red when the battery is low 4 hours of use at 6 lumens peak output NiMH battery with no memory effect 24V AC and 12/24V DC chargers supplied Weatherproof body and switch Fold away metal swivel hook Spare Parts to suit /24V charger to suit V charger to suit Metal swivel hook to suit Battery to suit Lamp only (battery and chargers not included) 66

25 SEE EZY L.E.D 7132 See Ezy, Professional Rechargeable Cordless L.E.D Inspection Light This cordless L.E.D light with electronic power management delivers in excess of 8 hours of continuous use at % output. This means there is no fade out when the battery is low. A 24V AC docking station is supplied for convenient recharging and storage when not in use. The charger can be desk or wall mounted making it ideal for all workshop environments. The durable rubber housing is shock and weather resistant with an integrated off/on switch, hanging hook and a shatterproof polycarbonate lens. An in-built L.E.D indicator glows red when the battery is low 8 hours of use at 6 lumens continuous output 24V docking station for workshop recharging NiMH battery with no memory effect Weatherproof body and switch Fold away metal swivel hook Spare Parts to suit 7132 P/No Lamp only (battery and charger not included) V docking station with lead to suit Battery to suit Metal swivel hook to suit 7132 P/No /24 Volt Charger to suit P/No Rechargeable L.E.D Inspection Lamp Fits securely to the base of P/No allowing the lamp to be recharged from any 12V or 24V power source. Fitted with a cigarette lighter plug for easy connection L.E.D indicator glows red when charging and green when fully charged Recharges the lamp in just 3 hours Internal fuse protection Convenient 1.5m lead Draws only 1A while recharging 67

26 OPTIMAX ROTATING BEACONS Made in the U.K, Optimax rotating beacons are well known in Europe for their reliability and performance. These beacons utilise a direct drive system that is neither worm nor belt driven. With the use of an upright motor and roller bearings, the beacon operates with almost no noise and wear is reduced to a minimum. Optimax beacons feature dual voltage motors for 12 or 24V operation, polycarbonate lenses, reverse polarity protection, IP56 certification and EMC approvals. The magnetic units have a heavy-duty magnet tested for use at 1km/h and a quality 3.5 metre spiral cord and cigarette lighter plug. Flash rate: 18RPM +/ A Optimax Rotating Beacon (Amber) Flange Base 12/24 Volt Dual voltage, radio suppressed, flange base, high impact polycarbonate lens Current draw: 4.4A at 12V, 2.6A at 24V (H1 globe not included)* ø1 8565R 8565B 8565G Green 18 *H1 55W or 7W globe not included. To order 12V use P/No or 24V use P/No A Optimax Rotating Beacon (Amber) Single Bolt Mount 12/24 Volt Dual voltage, radio suppressed, single bolt mount, high impact polycarbonate lens Current draw: 4.4A at 12V, 2.6A at 24V (H1 globe not included)* ø153 ø R 85652B 85652G Green 23 ø13 68 *H1 55W or 7W globe not included. To order 12V use P/No or 24V use P/No A Optimax Rotating Beacon (Amber) Pipe Mount Base 12/24 Volt Dual voltage, radio suppressed, DIN plug for pipe mounting, high impact polycarbonate lens Use with P/No.s 8549 or connecting piece Current draw: 4.4A at 12V, 2.6A at 24V ø1 (H1 globe not included)* 85654R 85654B 85654G Green *H1 55W or 7W globe not included. To order 12V use P/No or 24V use P/No ø13 228

27 OPTIMAX ROTATING BEACONS 85658A Optimax Rotating Beacon (Amber) Magnetic Base 12/24 Volt Dual voltage, radio suppressed, magnetic base, high impact polycarbonate lens, cigarette lighter plug and 3.5m spiral lead, magnetic base rated for use at 1km/h Current draw: 4.4A at 12V, 2.6A at 24V (H1 globe not included)* ø R 85658B 85658G Green ø *H1 55W or 7W globe not included. To order 12V use P/No or 24V use P/No The tip of the accessory plug found on the magnetic base beacon can be removed for use with either cigarette lighter sockets or accessory sockets. 8567A Optimax Giant Rotating Beacon (Amber) Flange Base 12/24 Volt Dual voltage, radio suppressed, flange base, high impact polycarbonate lens with specially designed reflector to utilise the large body and produce increased light output Current draw: 4.4A at 12V, 2.6A at 24V (H1 globe not included)* 8567R 8567B ø *H1 55W or 7W globe not included. To order 12V use P/No or 24V use P/No P/No Spare Parts to suit Optimax Beacons Cage to suit 8565 and Amber lens to suit lens to suit lens to suit Amber lens to suit 8565, 85652, 85654, lens to suit 8565, 85652, 85654, lens to suit 8565, 85652, 85654, Green lens to suit 8565, 85652, 85654, /24V direct drive motor 69

28 HI OPTICS ROTATING BEACONS All Narva Hi Optics beacons share the same internal structure and components. The metal base, combined with a unique internal suspension system provides extra protection and prolongs beacon life. Features include dual voltage circuitry and motors, long wearing brass worm drives, stainless steel lens screws and radio suppression. The range consists of Baby and Euro Flex beacons with high impact polycarbonate lenses designed to flex away from obstacles and absorb vibration, magnetic beacons with cigarette lighter plug and spiral lead, pole mount beacons and flange base for permanent fixture. Flash rate: 18RPM +/ A Hi Optics Baby Flex Rotating Beacon (Amber) Pipe Mount 12/24 Volt Dual voltage, radio suppressed, high impact polycarbonate lens, with flexible rubber spring system and DIN plug for pipe mounting Use with P/No.s 8549 or connecting piece Current draw: 4.8A at 12V, 3.1A at 24V (H1 globe not included)* 854R 854B ø1 ø1 8541A Hi Optics Baby Flex Rotating Beacon (Amber) 12/24 Volt Dual voltage, radio suppressed, high impact polycarbonate lens, with flexible rubber spring system for 3-point flange base mounting Current draw: 4.8A at 12V, 3.1A at 24V (H1 globe not included)* 8541R 8541B * H1 55W or 7W globe not included. To order 12V use P/No or 24V use P/No Spare Parts to suit Baby Flex Beacons 8546 Amber polycarbonate lens 8547 polycarbonate lens 8548 polycarbonate lens 8548 Dual volt motor and worm drive Circuit board 8542A Hi Optics Euro Flex Rotating Beacon (Amber) Pipe Mount 12/24 Volt Low profile, dual voltage, radio suppressed, high impact polycarbonate lens, with flexible rubber spring system and DIN plug for pipe mounting * H1 55W or 7W globe not included. To order 12V use P/No or 24V use P/No Ø1 Ø Use with P/No.s 8549 or connecting piece Current draw: 4.8A at 12V, 3.1A at 24V (H1 globe not included)* 8542R 8542B Spare Parts to suit Euro Flex Beacons 8543 Amber polycarbonate lens 8544 polycarbonate lens 8545 polycarbonate lens 8548 Dual volt motor and worm drive Circuit board

29 HI OPTICS ROTATING BEACONS 854A Hi Optics Baby Rotating Beacon Single Bolt Mount (Amber) 12/24 Volt Ø1 Dual voltage, radio suppressed, mm single bolt mount Current draw: 4.8A at 12V, 3.1A at 24V (H1 globe not included)* 854R 854B 854G Green Ø M Magenta 85411A Hi Optics Baby Magnetic Rotating Beacon (Amber) 12/24 Volt Ø1 Dual voltage, radio suppressed, magnetic base with suction pads, cigarette lighter plug and spiral lead Current draw: 4.8A at 12V, 3.1A at 24V (H1 globe not included)* R 85411B 85411G Green 85411M Magenta Spare Parts to suit Baby Beacons * H1 55W or 7W globe not included. To order 12V use P/No or 24V use P/No Magenta acrylic lens Amber acrylic lens acrylic lens acrylic lens Green acrylic lens 8548 Dual volt motor and worm drive Cigarette lighter plug and spiral lead Magnetic base with suction pads Suction pads (set of 4) Circuit board 8542A Hi Optics Rotating Beacon (Amber) Flange Base 12/24 Volt Dual voltage, radio suppressed, flange base Current draw: 4.8A at 12V, 3.1A at 24V (H1 globe not included)* Ø R * H1 55W or 7W globe not included. To order 12V use P/No or 24V use P/No Ø B 8542G 8542M Green Magenta For spare parts listing refer to page 72 71

30 HI OPTICS ROTATING BEACONS 85421A Hi Optics Rotating Beacon (Amber) Pipe Mount 12/24 Volt Dual voltage, radio suppressed, pipe mounting Current draw: 4.8A at 12V, 3.1A at 24V (H1 globe not included)* Ø R 85421B 85421G Green 85421M Magenta 25 Ø A Hi Optics Rotating Beacon (Amber) Magnetic Base 12/24 Volt Ø126 Dual voltage, radio suppressed, magnetic base with suction pads, cigarette lighter plug and spiral lead Current draw: 4.8A at 12V, 3.1A at 24V (H1 globe not included)* R 85423B 85423G 85423M Green Magenta Ø16 * H1 55W or 7W globe not included. To order 12V use P/No or 24V use P/No Spare Parts to suit Rotating Beacon P/No.s 8542, 85421, 85423: Magenta acrylic lens Amber acrylic lens acrylic lens acrylic lens Green acrylic lens 8548 Dual volt motor and worm drive Cigarette lighter plug and spiral lead Magnetic base with suction pads Suction pads (set of 4) Circuit board Hi Optics Beacon Accessories P/No P/No P/No P/No Cage to suit 854 and Connecting piece for pipe mounting to suit beacons 854, 8542, 85421, Outer diameter 24mm Connecting piece for pipe mounting to suit beacons 854, 8542, 85421, Outer diameter 24mm Mounting plate for use with connecting piece

31 SENTRY PORTABLE BATTERY POWERED STROBES The Sentry L.E.D strobe is a convenient portable warning lamp that can be used in a wide variety of applications. Powered by two D size batteries, the ultra low current draw of L.E.D allows the lamp to deliver more than hours of life before battery replacement is required. Suitable for outdoor use, the strong magnetic base and hanging cord allow the lamp to be used on vehicles or in any environment that requires flashing caution lamps such as warehouses, docks, rail yards and construction sites. The lamp features an external off/on switch with weatherproof rubber boot. An internal slide switch activates a light sensor that turns the lamp on in low light conditions and off when daylight returns. The optional P/No handle allows for further use as a traffic wand. The 45mm dia. handle also fits into the opening of some large traffic cones. In-built light sensor Internal slide switch to activate light sensor 8532A Sentry L.E.D Portable Battery Powered Strobe (Amber) with Magnetic Base Features: L.E.D technology powered by two D size batteries (not included) for convenient portable lighting suitable for indoor or outdoor use Low current draw, + hours of battery life Powerful magnetic base Off/On weatherproof switch Internal slide switch to activate light sensor for automatic day/night switching The heavy-duty cord can be used to suspend to lamp if required Ø6 Magnetic base Handle to suit Sentry Strobe Lamp Screws easily to the base of the P/No. 8532A. Simply remove the magnetic base to fit. Ideal for use as a traffic wand or the handle (45mm dia.) conveniently fits into the opening of some traffic cones 73

32 GUARDIAN STROBES Guardian strobes are a range of high performing yet economically priced strobe lights best suited to materials handling applications. Guardian strobes feature 12 8 multi-voltage circuitry and very low current draw making them ideal for use on forklifts. Virtually unbreakable polycarbonate lenses and flash tubes are readily available as replacement parts. The expanded range now includes magnetic base and L.E.D strobe options. The reliability of L.E.Ds make the Guardian strobes ideal for continuous long term use A Single Flash Strobe Light (Amber) Flange Base 12 8 Volts Features high impact polycarbonate lens and includes mounting bolts and gasket Current draw:.3/.5a Flash rate: 6 (Single) *Candela seconds: 6 Ø A As above with Magnetic Base, Cigarette Lighter Plug and 2.5m Spiral Lead Ø6 14 Ø72 Ø86 Ø A Single Flash Strobe Light (Amber) Flange Base 12 8 Volts Features: high impact polycarbonate lens and includes mounting bolts and gasket Current draw:.3/.5a Flash rate: 6 (Single) *Candela seconds: A As above with Magnetic Base, Cigarette Lighter Plug and 2.5m Spiral Lead 74 *Candela measured through clear lens 98 Ø86 Ø13

33 GUARDIAN STROBES 8534A Single Flash Strobe Light (Amber) Flange Base 12 8 Volts Features: high impact polycarbonate lens and includes mounting bolts and gasket Current draw:.3/.5a Flash rate: 6 (Single) 5 Candela seconds: *Candela measured through clear lens Ø86 Ø A L.E.D Single Flash Strobe Light (Amber) Flange Base 12 8 Volts Features: high impact polycarbonate lens. Suitable for applications such as materials handling where use is continuous and long term. The low current draw and resistance to vibration makes L.E.D strobes perfect for electric forklifts. The use of L.E.D increases lamp life and reduces maintenance Includes: mounting bolts and gasket Current draw:.2a Comparative L.E.D candela rating: 6* 85369A As above with Magnetic Base, Cigarette Lighter Plug and 2.5m Spiral Lead The combination of L.E.D technology and the magnetic base makes this lamp a great glove box item. With no flash tube, it is safe to use with laser levelling systems without causing interference Ø86 98 Ø13 *Based on visual comparison to traditional strobe candela ratings Spare Parts to suit Guardian Strobe Lights P/No P/No Amber lens to suit 85336A, 85337A Amber lens to suit 85338A, 85339A, 85368A, 85369A Amber lens to suit 8534A Flash tube to suit 85336A, 85337A Flash tube to suit 85338A, 85339A, 8534A The Guardian range of strobes are supported by a Guardian Reverse Alarm also with a 12 8 voltage range. Please turn to page 222 for details

34 MICROBURST STROBES Strobe lights have many significant advantages over mechanical rotating beacons including longer life and reduced current draw, yet reliability and longer life can be further improved by eliminating the harmful effects of moisture, dust and dirt. Microburst strobe lights are sonically sealed to protect the electronics from external elements. Utilising the latest technologies, these small yet powerful strobes (cm high) combine performance and reliability in a virtually unbreakable polycarbonate lens and housing. The range includes single flash, 12 8 volt units, high output double flash strobes available in volt and the volt L.E.D strobe. Magnetic versions feature a 3 metre lead with off/on switch and cigarette lighter plug with L.E.D indicator. Microburst strobes are subject to a 3 year warranty. Microburst L.E.D strobes are subject to a 5 year warranty. 8535A Single Flash Sonically Sealed Strobe Light (Amber) Flange Base 12 8 Volts 2 Current draw:.27/.6a Flash rate: 75 *Candela seconds: Ø R 8535B 8535G 8535C Green Clear 85352A Amber, as above, with Magnetic Base, Cigarette Lighter Plug, Off/On Switch with L.E.D Indicator and 3 Metre Straight Lead 85352R 85352B 85352G 85352C Green Clear 85354A Single Flash Sonically Sealed Strobe Light, Flange Base (Amber) Volts with In-built Reversing Alarm Combines a single flash strobe with a 92 decibel reversing alarm that can be wired independently or in combination *Candela measured through clear lens 12 2 Ø117 Current draw:.27/.a Flash rate: 75 *Candela seconds: 76

35 MICROBURST STROBES 2 Ø A L.E.D Sonically Sealed Strobe Light, Flange Base (Amber) Volts Suitable for applications where reliability, long hours of use and low current draw are important factors. The L.E.Ds pulse at 176 flashes per minute, have minimal current draw (.3A at 12V) and a life of, hours. Due to this long life, the L.E.D Microburst range is backed by a 5 year warranty 85356R 85356B 85356C Clear 2 Ø A Double Flash Sonically Sealed Strobe Light (Amber) Flange Base Volts Current draw:.75/.17a Flash rate: 7 (Double) *Candela seconds: R 8536B 8536G 8536C Green Clear 85362A Amber, as above, with Magnetic Base, Cigarette Lighter Plug, Off/On Switch with L.E.D Indicator and 3 Metre Straight Lead 85362R 85362B 85362G 85362C Green Clear *Candela measured through clear lens 8539 Stainless Steel Branch Guard Protective guard to suit all Microburst strobes 77

36 HI OPTICS STROBES Manufactured in the USA, Hi Optics strobe lights feature high quality flash tubes and fresnel lenses to produce intense light output from all lamp types. All circuitry is solid state and potted for protection against the effects of moisture, dust and vibration. Multi-voltage circuitry and a wide variety of outputs make Hi Optics strobes suitable for applications from materials handling machinery through to mining equipment Ø145 Ø A Hi Optics Double Flash Strobe Light (Amber) Flange Base Multi-Voltage Features: vibration absorbing rubber base, polycarbonate lens, potted circuitry, reverse polarity and shut-off protection Current draw:.75a at 12V. Flash rate: 7 (double) *Candela seconds: R 85444B 85444G 85444C 85444M 85446A Green Clear Magenta Hi Optics Double Flash Strobe Light (Amber) Magnetic Base Multi-Voltage Features: magnetic base with 3m spiral lead and cigarette lighter plug with L.E.D indicator, vibration absorbing rubber base, polycarbonate lens, potted circuitry, reverse polarity and shut off protection R 85446B 85446G 85446C 85446M Green Clear Magenta 85454A Hi Optics Quad Flash Strobe Light (Amber) Low Profile Flange Base 12 or 24 Dual Voltage Features: polycarbonate lens, high output with reverse polarity and shut off protection Current draw: 2A at 12V. Flash rate: 8 (quad) *Candela seconds: R 85454B 85454G Green 85454C Clear 85454M Magenta Ø145 *Candela measured through clear lens 85457A Hi Optics Quad Flash Strobe Light (Amber) Aluminium Flange Base 12 or 24 Dual Voltage The highest output strobe in the range featuring a robust aluminium base Current draw: 3.25A at 12V Flash rate: 75 (quad) *Candela seconds: R 85457B 85457G Green 85457C Clear

37 HI OPTICS STROBES 85458A Hi Optics Quad Flash Strobe Light and Buddy (Amber) Low Profile Flange Base 12 or 24 Dual Voltage One lamp contains circuitry to power and control itself and the buddy strobe. The master then alternates the flash between both strobes Current draw: 2A at 12V Flash rate: 8 (quad) per head *Candela seconds: 825 per head 85458R 85458B 85458G 85458C 85458RB 85458M Green Clear / Magenta 85459A Hi Optics Extreme Duty Double Flash Strobe Light (Amber) Flange Base 12 or 24 Dual Voltage Ideal for extreme work environments such as mining, earth moving and construction Circuitry is potted in urethane with a heavy-duty flash tube, virtually unbreakable polycarbonate lens and rubber base Current draw: 1.6A at 12V Flash rate: 6 (double) *Candela seconds: R 85459B 85459G 85459C Green Clear 16 Ø145 *Candela measured through clear lens Spare Parts to suit Hi Optics Strobe Lights P/No. 812BL P/No Flash tube to suit Flash tube to suit 85444, Flash tube to suit 85454, Amber lens to suit all strobes except 85457, lens to suit all strobes except 85457, lens to suit all strobes except 85457, Green lens to suit all strobes except 85457, Clear lens to suit all strobes except 85457, Magenta lens to suit all strobes except 85457, Branch guard to suit 85457, strobes Amber lens to suit 85457, strobes lens to suit 85457, strobes lens to suit 85457, strobes Green lens to suit 85457, strobes Clear lens to suit 85457, strobes 812BL Cigarette lighter plug to suit strobes 8533C Flash tube to suit strobes 79

38 HIGH OUTPUT L.E.D STROBES These lamps utilise the latest L.E.D technology to provide all the performance benefits offered by strobes but with higher resistance to shock and vibration and ultra long life. Three of the models feature four user selected flash patterns to suit different work environments. The P/No A is unique due to its 36 o rotating/quad flash pattern, essentially making it perform like an L.E.D rotating beacon. All lamps come with virtually unbreakable polycarbonate lenses and are EMC approved. With the use of L.E.Ds, the circuitry is more durable, allowing a 5 year warranty to be offered. 8523A High Output L.E.D Strobe Light (Amber) with 4 Selectable Flash Patterns, Flange Base, 12/24 Volt An in-built micro switch in the lamp base allows the flash pattern to be selected prior to installation Current draw: 1.2A at 12V Comparative L.E.D candela rating: 8* 8523R 8523B Flash patterns: 1 2 Output Output <.9 sec cycle > < 1.25 sec cycle > Ø178 In-built micro switch. Output < Output 6.5 sec cycle > < 1. sec cycle > 85232A High Output L.E.D Strobe Light (Amber) with 4 Selectable Flash Patterns, Magnetic Base and Cigarette Lighter Plug with Off/On Switch, 12/24 Volt An in-built micro switch in the lamp base allows the flash pattern to be selected prior to use Current draw: 1.2A at 12V Comparative L.E.D candela rating: 8* 85232R 85232B Ø In-built micro switch. Output Output Flash patterns: 1 2 <.9 sec cycle 3 4 < Output > < 1.25 sec cycle > Output 6.5 sec cycle > < 1. sec cycle > 8 *Based on visual comparison to traditional strobe candela ratings

39 HIGH OUTPUT L.E.D STROBES 85234A Megaburst High Output L.E.D Strobe Light (Amber) with 4 Selectable Flash Patterns, Flange Base, 12/24 Volt Polycarbonate lens with aluminium heat sink to allow maximum brightness and performance Current draw: 1.8A at 12V Comparative L.E.D candela rating: 12* 85234R 85234B Flash patterns: 1 2 Output Output <.9 sec cycle > < 1.25 sec cycle > Ø Internal mirco switch allows the flash pattern to be changed in the field 3 4 Output Output < 6.5 sec cycle > < 1. sec cycle > *Based on visual comparison to traditional strobe candela ratings 85238A L.E.D Beacon (Amber) with Rotating Simulation and Quad Flash Pattern, Flange Base, 12/24 Volt Polycarbonate lens with 192 individual L.E.Ds with optics Current draw: 1.8A at 12V 85238R 85238B >>>> >>>> Pre-programmed alternating pattern: Rotating simulation/quad flash ROTATING 8 sec cycle Ø

40 SELF CONTAINED L.E.D WARNING LIGHTS Utilising the very latest high powered L.E.Ds available, these lights feature self contained circuitry with numerous selectable flash patterns designed to operate independently or to be synchronised together with as many units as the application requires. The solid state circuitry is potted in epoxy to seal out moisture and protect the electronics from vibration, while the robust housings feature polycarbonate lenses delivering an impact resistant and weatherproof light that is ready for any tough environment. All models provide a very intense light output using high powered 1 watt L.E.Ds. The more 1 watt L.E.Ds used, the brighter the flash. The P/No X-Factor series breaks this rule by utilising three 5 watt L.E.Ds. These recently released L.E.Ds are combined with a die cast alloy housing that acts as a heatsink to drive the light output to an extraordinary level of brightness. This technology combined with a faceted wide angle optic makes this warning lamp one of the highest performers available. Operate independently or synchronised together 852A 12 Volt High Powered L.E.D Warning Light (Amber) 3 x 1 Watt L.E.Ds with Multiple Flash Patterns Features: three 1 watt high powered L.E.Ds with a wide range of selectable flash patterns. Patterns can be alternating or synchronous. Includes mounting gasket and trigger wire for easy switching between flash patterns 852R 852B, 12V, 12V Lamp clear when inactive 85212A 12 Volt High Powered L.E.D Warning Light (Amber) 4 x 1 Watt L.E.Ds with Multiple Flash Patterns Features: four 1 watt high powered L.E.Ds with a wide range of selectable flash patterns. Patterns can be alternating or synchronous. Includes mounting gasket and trigger wire for easy switching between flash patterns R, 12V 85212B, 12V 85212RB /, 12V 85213A Amber, 24V 85213R, 24V 85213B, 24V 85213RB /, 24V Lamp clear when inactive

41 SELF CONTAINED L.E.D WARNING LIGHTS A 12 Volt High Powered L.E.D Warning Light (Amber) 6 x 1 Watt L.E.Ds with Multiple Flash Patterns Features: six 1 watt L.E.Ds with a wide range of selectable flash patterns. Patterns can be alternating or synchronous. Includes mounting gasket and trigger wire for easy switching between flash patterns R 85216B 85216RB, 12V, 12V /, 12V Lamp clear when inactive 8522A 12/24 Volt X- Factor L.E.D Warning Light (Amber) 3 x 5 Watt L.E.Ds with 4 Flash Patterns Features: three 5 watt high powered L.E.Ds with 4 selectable flash patterns. Multiple units can be synchronised. Includes integrated mounting gasket and trigger wire for easy switching between flash patterns 8522R, 12/24V 8522B, 12/24V 8522C White, 12/24V P/No Lamp clear when inactive Accessories to suit L.E.D Warning Lights L Bracket to suit L Bracket to suit 85212, 85213, L Bracket to suit

42 L.E.D WARNING LIGHTS L.E.D technology is affecting all types of lighting applications because of the benefits it offers in terms of reliability, durability and current draw. The introduction of high intensity L.E.Ds allows this technology to be used in emergency lighting and warning devices. Narva offers a range of L.E.D warning lamps in the popular Model 4 and 6 series. The lamps can be used independently or in combination where they will operate in an alternating quad flash pattern. 852A Model 4 L.E.D Flashing Lamp (Amber) 12 or 24 Dual Voltage, Quad Flash Features: a sonically sealed housing with a virtually unbreakable polycarbonate lens flush mounted in a vinyl grommet. Use the lamp independently or combine two lamps to alternate the quad flash pattern. Interconnecting cable and grommet (P/No. 948) included. No control box required Current draw:.33a at 12V Flash rate: 7 852R 852B Lamp with grommet A Model 6 L.E.D Flashing Lamp (Amber) 12 or 24 Dual Voltage, Quad Flash PLATE HOLE THICKNESS SIZE Grommet Hole Sizes Features: a sonically sealed housing with a virtually unbreakable polycarbonate lens flush mounted in a vinyl grommet. Use the lamp independently or combine two lamps to alternate the quad flash pattern. Interconnecting cable and grommet (P/No. 968) included. No control box required Current draw:.33a at 12V Flash rate: R 8524B Grommet Hole Size radius WARNING LAMPS These uniquely designed warning lamps utilise 21 high output L.E.Ds with individual magnifiers to further spread and intensify the L.E.D performance. They have a quad flash pattern yet each head includes 3 steady burning target L.E.Ds so your eye never loses sight of the light source. The lamps are flush mounted with virtually indestructible polycarbonate lenses. Use them independently or use the interconnecting cable supplied to alternate two heads. 84

43 TRAFFIC MASTER L.E.D ARROW BAR Using the latest L.E.D technology, Traffic Master provides brilliant light output and high visibility for use in hazardous situations. Six distinct warning patterns are available via the user friendly in-cabin control head. Available as a single or split bar system, both are dual voltage with a low current draw of just 2.2 amps at 12V. Resistance to vibration, a long service life of up to, hours and the use of tough, polycarbonate lenses contribute to the safety features of this unit. Traffic Master is divided into eight individual modules that can be easily replaced. This unique design, combined with the low maintenance of L.E.Ds, make Traffic Master exceptionally cost effective. Both systems come pre-wired with 7.6m of cable and adjustable mounting brackets. The compact dimensions make mounting and positioning on vehicles a simple exercise or 24 Dual Voltage L.E.D Traffic Master Arrow Bar Features: adjustable mounting brackets, polycarbonate lenses, 7.6 metres of cable and in-cabin control box with six distinct warning patterns Dimensions: 7mm x 67mm x 45mm or 24 Dual Voltage L.E.D Traffic Master Split Arrow Bar Features: adjustable mounting brackets, polycarbonate lenses, 7.6 metre cable per side and in-cabin control box with six distinct warning patterns Dimensions (per section): 7mm x 523mm x 45mm P/No. 856 P/No. 855 P/No. 857 Spare Parts to suit Traffic Master Arrow Bar 855 Control box to suit Traffic Master 856 L.E.D centre module to suit Traffic Master 857 L.E.D end module to suit Traffic Master 858 Adjustable mounting bracket to suit Traffic Master metre cable to suit Traffic Master 85

44 EUROMAX MINI BARS The Euromax range of light boxes are available with rotators, strobes or the latest in L.E.D strobe technology. All boxes feature aerodynamically designed lenses manufactured of virtually unbreakable polycarbonate. The broad reflector design used on the rotators provides superior light output while the strobe units feature heavy-duty flash tubes for increased resistance to impact and vibration. The L.E.D light boxes are available in two versions, standard and high output. Both types include six individual L.E.D modules that feature quad flash circuitry. The premium units feature the latest in high output L.E.D technology to generate exceptional light output with minimal current draw. The L.E.D modules found within the boxes are backed by a 3 year warranty for the standard units and 5 years for the dual voltage high output models. 855A 12 Volt Euromax Mini Bar (Amber) 2 Rotators Flange Base Features: polycarbonate lens, 2 x rotators with fitted H1 12V 55W globes (P/No. 4832) and 2 x V mirrors to multiply flashes both front and rear. Supplied with mounting kit Current draw: 8.3A at 12V 1 855A-24V Amber, 24V 855R 855R-24V, 24V 855B 855B-24V, 24V 855RB / 855RB-24V /, 24V A 12 Volt Euromax Mini Bar (Amber) 2 Rotators Magnetic Base Features: polycarbonate lens, 2 x rotators with fitted H1 12V 55W globes (P/No. 4832), 2 x V mirrors to multiply flashes both front and rear, 3 metre straight lead and cigarette lighter plug. Four large magnets with covers provide secure fitting Current draw: 8.3A at 12V 8551A-24V Amber, 24V 8551R 8551R-24V, 24V 8551B 8551B-24V, 24V 8551RB / 8551RB-24V /, 24V

45 EUROMAX MINI BARS 8552A 12/24 Volt Euromax Mini Bar (Amber) 2 Quad Flash Strobes, Flange Base Quad flash strobes operate in an alternating pattern Features: polycarbonate lens, 2 x heavy-duty strobe heads, quad flash control box, V mirror and mounting kit Current draw: 2.5A at 12V R 8552B 8552RB / 8553A 12/24 Volt Euromax Mini Bar (Amber) 2 Quad Flash Strobes, Magnetic Base Quad flash strobes operate in an alternating pattern Features: polycarbonate lens, 2 x heavy-duty strobe heads, quad flash control box, V mirror, 3 metre straight lead and cigarette lighter plug with off/on illuminated switch. Four large magnets with covers provide secure fitting Current draw: 2.5A at 12V R 8553B 8553RB / A 12 Volt Euromax L.E.D Mini Bar (Amber) with 6 Quad Flash L.E.D Modules, Flange Base Features: six L.E.D strobe modules (3 per side) that operate in an opposing pattern. Includes: polycarbonate lens, mounting kit and 3 year L.E.D warranty* Current draw:.4a at 12V A 24V As above 24V Current draw:.2a at 24V A 12 Volt Euromax L.E.D Mini Bar (Amber) with 6 Quad Flash L.E.D Modules, Magnetic Base Features: six L.E.D strobe modules (3 per side) that operate in an opposing pattern Includes: polycarbonate lens, four large magnetic feet with covers plus 3 metre straight lead with cigarette lighter plug that includes an illuminated off/on switch. 3 year L.E.D warranty* Current draw:.4a at 12V 8555A 24V As above 24V Current draw:.2a at 24V 87

46 EUROMAX MINI BARS 856A High Output 12/24 Volt Euromax L.E.D Mini Bar (Amber), with 6 Quad Flash L.E.D Modules, Flange Base Features: multi-voltage circuitry and six high output L.E.D strobe modules (3 per side) that operate in an opposing pattern. Includes: polycarbonate lens, mounting kit and a 5 year L.E.D warranty* Current draw: 1.4A at 12V 856R 856B 856RB / 8561A High Output 12/24 Volt Euromax L.E.D Mini Bar (Amber), with 6 Quad Flash L.E.D Modules, Magnetic Base Features: multi-voltage circuitry and six high output L.E.D strobe modules (3 per side) that operate in an opposing pattern. Includes: polycarbonate lens, four large magnetic feet with covers plus 3 metre straight lead with cigarette lighter plug that includes an illuminated off/on switch and a 5 year L.E.D warranty* Current draw: 1.4A at 12V R 8561B 8561RB / P/No P/No P/No P/No P/No Spare Parts to suit Euromax Mini Bars 8515A Amber lens to suit mini bars 8515R lens to suit mini bars 8515B lens to suit mini bars 8515RB /blue lens to suit mini bars V motor and drive to suit rotators V 24V motor and drive to suit rotators V complete rotator assembly V 24V complete rotator assembly Reflector to suit to suit rotators Flange base mounting kit Single magnet and cover /24V strobe control box V mirror to suit mini bars Flash tube to suit mini bar strobes Inner strobe lens to suit mini bars V large amber L.E.D module to suit 8554A, 8555A V 24V large amber L.E.D module to suit 8554A-24V, 8555A-24V V small amber L.E.D module to suit 8554A, 8555A V 24V small amber L.E.D module to suit 8554A-24V, 8555A-24V Mounting bracket to suit 8554, 8555 L.E.D modules Amber L.E.D module to suit 856A, 8561A L.E.D module to suit 856R, 8561R L.E.D module to suit 856B, 8561B

47 OPTIMAX LIGHT BARS P/No. 855A A Optimax Dual Volt 1.2m (48'') Light Bar (Amber) with 3 Rotators 292 *All optimax dual voltage units are supplied fitted with 12V globes unless otherwise specified. All bars are available with red, blue, green or clear lenses Features: polycarbonate lenses, 3 rotators, 6 angled mirrors to multiply flash performance, wire loom and mounting kit. Fitted with 3 x 12V H1 55W halogen globes (P/No. 4832)* 855SA 1.2m (48 ) light bar (Amber) with 3 strobes 85515A 1.4m (54 ) light bar (Amber) with 3 rotators 85516A 1.5m (58 ) light bar (Amber) with 3 rotators 85518A 1.7m (68 ) light bar (Amber) with 6 rotators 85518SRA 1.7m (68 ) light bar (Amber) with 4 rotators and 2 strobes P/No. 8552A 8552A Optimax Dual Volt 1.2m (48'') Light Bar (Amber) with 2 Rotators and Illuminated Opal Centre Features: polycarbonate lenses, 2 rotators, 4 mirrors, illuminated centre for front and rear sign facility, wire loom and mounting kit. Fitted with 2 x 12V H1 55W halogen globes (P/No. 4832)* NB: To order bars in other colours, change the part number suffix accordingly e.g. 8552B = blue 8552SA 85525A 85525SA 85526A 85526SA 85528A 85528SA 1.2m (48 ) light bar (Amber) with 2 strobes and illuminated centre 1.4m (54 ) light bar (Amber) with 2 rotators and illuminated centre 1.4m (54 ) light bar (Amber) with 2 strobes and illuminated centre 1.5m (58 ) light bar (Amber) with 2 rotators and illuminated centre 1.5m (58 ) light bar (Amber) with 2 strobes and illuminated centre 1.7m (68 ) light bar (Amber) with 2 rotators and illuminated centre 1.7m (68 ) light bar (Amber) with 2 strobes and illuminated centre P/No. 8553SRA *NB: To order bars in other colours, change the part number suffix accordingly e.g. 8553R = red 8553A Optimax Dual Volt 1.2m (48'') Light Bar (Amber) with 4 Rotators and Illuminated Opal Centre Features: polycarbonate lenses, 4 rotators, 4 mirrors, illuminated centre for front and rear sign facility. Supplied with wire loom and mounting kit. Fitted with 4 x 12V H1 55W halogen globes (P/No. 4832)* 8553SRA 85535A 85535SRA 85536A 85536SRA 85538A 85538SRA 1.2m (48 ) light bar (Amber) with 2 rotators, 2 strobes and illuminated centre 1.4m (54 ) light bar (Amber) with 4 rotators and illuminated centre 1.4m (54 ) light bar (Amber) with 2 rotators, 2 strobes and illuminated centre 1.5m (58 ) light bar (Amber) with 4 rotators and illuminated centre 1.5m (58 ) light bar (Amber) with 2 rotators, 2 strobes and illuminated centre 1.7m (68 ) light bar (Amber) with 4 rotators and illuminated centre 1.7m (68 ) light bar (Amber) with 2 rotators, 2 strobes and illuminated centre 89

48 OPTIMAX LIGHT BARS P/No. 8554A 8554A Optimax Dual Volt 1.2m (48'') Light Bar (Amber) with 2 Rotators, 4 Mirrors, Speaker and Grille Features: polycarbonate lenses, 2 rotators, 4 mirrors, fitted with W speaker and grille, wire loom and mounting kit. Fitted with 2 x 12V H1 55W halogen globes (P/No. 4832)* *All optimax dual voltage units are supplied fitted with 12V globes unless otherwise specified. All bars are available with red, blue, green or clear lenses 8554SA 85545A 85545SA 85546A 85546SA 85548A 85548SA 1.2m (48 ) light bar (Amber) with 2 strobes, speaker and grille 1.4m (54'') light bar (Amber) with 2 rotators, speaker and grille 1.4m (54 ) light bar (Amber) with 2 strobes, speaker and grille 1.5m (58 ) light bar (Amber) with 2 rotators, speaker and grille 1.5m (58 ) light bar (Amber) with 2 strobes, speaker and grille 1.7m (68 ) light bar (Amber) with 2 rotators, speaker and grille 1.7m (68 ) light bar (Amber) with 2 strobes, speaker and grille P/No. 8554A P/No. 8555SRA 8555A Optimax Dual Volt 1.2m (48 ) Light Bar, (Amber) with 4 Rotators, 4 Mirrors, Speaker and Grille Features: polycarbonate lenses, 4 rotators, 4 mirrors, fitted with W speaker and grille, wire loom and mounting kit. Fitted with 4 x 12V H1 55W halogen globes (P/No. 4832)* NB: To order bars in other colours, change the part number suffix accordingly e.g. 8555RB = red/blue 8555SRA 1.2m (48 ) light bar (Amber) with 2 rotators, 2 strobes, speaker and grille 85555A 1.4m (54 ) light bar (Amber) with 4 rotators, speaker and grille 85555SRA 1.4m (54 ) light bar (Amber) with 2 rotators, 2 strobes, speaker and grille 85556A 1.5m (58 ) light bar (Amber) with 4 rotators, speaker and grille 85556SRA 1.5m (58 ) light bar (Amber) with 2 rotators, 2 strobes, speaker and grille 85558A 1.7m (68 ) light bar (Amber) with 4 rotators, speaker and grille 85558SRA 1.7m (68 ) light bar (Amber) with 2 rotators, 2 strobes, speaker and grille Volt Public Address Amplifier 9 Features: up to 7W output with less than % distortion, for air horn and radio/tape re-broadcast facilities Dimensions: 62mm x 154mm x 157mm Volt Full Function Siren/PA Amplifier Features: quick connect microphone, wail, yelp, hi-lo, air horn and radio re-broadcast facilities, tap on/tap off yelp connection for horn or foot switch, up to 2W RMS output Dimensions: 62mm x 154mm x 157mm As above in 24 Volt

49 OPTIMAX OPTIONAL EXTRAS OPTIONAL EXTRAS Fitted 12V 5W alley lamps (pair), uses high powered dichroic halogen lamps Fitting kit for gutter type roof Fitting kit for gutter less roof P/No Standard lettering to suit 1.2m (48 ) bars with opal centre TOWING Standard lettering to suit 1.2m (48 ) bars with opal centre RECOVERY Standard lettering to suit 1.2m (48 ) bars with opal centre SECURITY Standard lettering to suit 1.2m (48 ) bars with opal centre RANGER P/No Standard lettering to suit 1.4m (54 ), 1.5m (58 ) and 1.7m (68 ) bars with opal centre TOWING Standard lettering to suit 1.4m (54 ), 1.5m (58 ) and 1.7m (68 ) bars with opal centre RECOVERY Standard lettering to suit 1.4m (54 ), 1.5m (58 ) and 1.7m (68 ) bars with opal centre SECURITY P/No Standard lettering to suit 1.4m (54 ), 1.5m (58 ) and 1.7m (68 ) bars with opal centre RANGER Personalised lettering to suit 1.2m (48 ) bars Personalised lettering to suit 1.4m (54 ) bars Personalised lettering to suit 1.5m (58 ) and 1.7m (68 ) bars Fitted front take down lamps (pair) perform as in-built flood lamps P/No CUSTOM MADE LIGHT BARS Custom made light bars are available on request. If the standard configuration does not meet your requirements simply contact your Narva representative to discuss what is needed Fitted rear take down lamps (pair) perform as in-built flood lamps 91

50 OPTIMAX LOW PROFILE L.E.D LIGHT BARS A Optimax 12 Volt.8m (33 ) L.E.D Light Bar (Amber) with 8 L.E.D modules NB: All bars are available in red and blue upon request. For 24V applications add suffix -24V e.g 85511A-24V Features: polycarbonate lenses, with 4 forward facing, 2 rearward facing and 2 side facing L.E.Ds 8556A.8m (33 ) L.E.D light bar (Amber) with L.E.D modules (4F, 4R and 2S) 85511A Optimax 12 Volt 1.2m (48 ) L.E.D Light Bar (Amber) with L.E.D modules NB: All bars are available in red and blue upon request. For 24V applications add suffix - 24V e.g 85511A-24V Features: polycarbonate lenses, with 5 forward facing, 3 rearward facing and 2 side facing L.E.Ds 85512A 1.4m (54 ) L.E.D light bar (Amber) with 12 L.E.D modules (6F, 4R and 2S) 85513A 1.4m (54 ) L.E.D light bar (Amber) with 15 L.E.D modules (7F, 6R and 2S) NB: All bars are available in red and blue upon request. For 24V applications add suffix - 24V e.g 85521A-24V 85521A Optimax 12 Volt 1.2m (48 ) L.E.D Light Bar (Amber) with 8 L.E.D modules and Illuminated Opal Centre Features: polycarbonate lenses, with 4 forward facing, 2 rearward facing and 2 side facing L.E.Ds and an illuminated centre for signage 85522A 1.2m (48 ) L.E.D light bar (Amber) with L.E.D modules (4F, 4R and 2S) and illuminated centre 85524A 1.4m (54 ) L.E.D light bar (Amber) with L.E.D modules (4F, 4R and 2S) and illuminated centre 92

51 OPTIMAX LOW PROFILE L.E.D LIGHT BARS 115 In-built Alley Lights NB: All bars are available in red and blue upon request. For 24V applications add suffix - 24V e.g 85541A-24V 85531A Optimax 12 Volt 1.2m (48 ) Light Bar (Amber) with 2 Rotators, 6 L.E.D Modules and 4 Alley Lights Features: 2 rotators fitted with 12V globes (P/No. 4832), angled mirrors and 6 L.E.D modules (3 forward facing, 3 rearward facing). Includes twin alley lights at each end 85533A m (54 ) light bar, (Amber) 2 rotators, 8 L.E.D modules (4F and 4R), 4 alley lights In-built Alley Lights NB: All bars are available in red and blue upon request. For 24V applications add suffix - 24V e.g 85541A-24V 85541A Optimax 12 Volt 1.2m (48 ) Light Bar (Amber) with 2 Rotators, 4 L.E.D Modules, 4 Alley Lights and Illuminated Opal centre Features: 2 rotators fitted with 12V globes (P/No. 4832), angled mirrors and 4 L.E.D modules (2 forward facing, 2 rearward facing). Includes twin alley lights at each end and an illuminated centre for signage 85543A 1.4m (54 ) light bar, (Amber) 2 rotators, 4 L.E.D modules (2F and 2R), 4 alley lights, with illuminated centre SPARE PARTS TO SUIT STANDARD BARS W speaker (internal bar mount) 8558 Dual volt replacement rotator (complete assembly) P/No Dual volt motor, bracket assembly and worm drive Replacement globe clip Amber lens to suit all light bar end sections P/No Amber lens to suit light bar centre section 1.2m Amber lens to suit light bar centre section 1.4m lens to suit all light bar end sections 8559 lens to suit light bar centre section 1.2m lens to suit light bar centre section 1.4m lens to suit all light bar end sections lens to suit light bar centre section 1.2m lens to suit light bar centre section 1.4m Amber lens to suit light bar centre section 1.5m and 1.7m lens to suit light bar centre sections 1.5m and 1.7m 93

52 OPTIMAX SPARE PARTS SPARE PARTS TO SUIT STANDARD BARS (continued) lens to suit light bar centre sections 1.5m and 1.7m Amber lens to suit light bar extension section 1.7m lens to suit light bar extension section 1.7m 856 lens to suit light bar extension section 1.7m Opal lens to suit light bar centre section 1.2m Opal lens to suit light bar centre section 1.4m P/No Opal lens to suit light bar centre section 1.5m and 1.7m Bridge mould to suit all light bars (1 only) P/No Seal to suit light bar bridge mould (1 only), 2 required per bridge End clip to suit light bar base (1 only) Light bar fitting kit for permanent bolt type mount Light bar fitting kit for permanent raised type mount SPARE PARTS TO SUIT LOW PROFILE BARS 8558 Dual volt replacement rotator (complete assembly) Dual volt motor, bracket assembly and worm drive P/No Replacement globe clip End clip to suit light bar base (1 only) End clip to suit light bar base with alley lights (1 only) 85623A Amber lens to suit light bar centre section 1.2m 85623R lens to suit light bar centre section 1.2m 85623B lens to suit light bar centre section 1.2m 85623O Opal lens to suit light bar centre section 1.2m 85624A Amber lens to suit light bar centre section 1.4m 85624R lens to suit light bar centre section 1.4m 85624B lens to suit light bar centre section 1.4m P/No P/No A 85624O Opal lens to suit light bar centre section 1.4m 85625A Amber lens to suit all light bar end sections 85625R lens to suit all light bar end sections 85625B lens to suit all light bar end sections 85627A 12V Amber 4 L.E.D module to suit light bar 85627A-24V 24V Amber 4 L.E.D module to suit light bar 85627R 12V 4 L.E.D module to suit light bar 85627R-24V 24V 4 L.E.D module to suit light bar 85627B 12V 4 L.E.D module to suit light bar 85627B-24V 24V 4 L.E.D module to suit light bar 8564 Bridge mould kit (complete) to suit light bars (1 only) Light bar fitting kit for permanent bolt type mount Light bar fitting kit for permanent raised type mount 94

G Globes Globe Holders 34 Guardian Strobes 33. B Blue Power Halogen Globe 34 Bulbs 34 35

G Globes Globe Holders 34 Guardian Strobes 33. B Blue Power Halogen Globe 34 Bulbs 34 35 NARVA PRODUCT INDEX A Accessory Plugs and Sockets 43 Amber Side Markers 60 61 AMP Super Seal Connectors 40 Automotive Fuses 36 Automotive Globes 34 35 B Blue Power Halogen Globe 34 Bulbs 34 35 C Cable

More information

R.V & INTERIOR LIGHTING

R.V & INTERIOR LIGHTING R.V & INTERIOR LIGHTING C O N V E N T I O N A L L A M P S 2 74 D O M E L A M P S 2 7 6 F L U O R E S C E N T L A M P S 2 7 8 C O U R T E S Y L A M P S 2 8 1 S W I V E L L A M P S 2 8 3 T R U C K A N D

More information

Free-Form Optics. Heavy Duty Bulb. Heavy Duty Mounts

Free-Form Optics. Heavy Duty Bulb. Heavy Duty Mounts Free-Form Optics Nordic Lights through their expertise in lens and reflector technology offer a range of light patterns to satisfy the varied and specialist lighting requirements of the mining, heavy duty

More information

Lighting Symbols. Rotating LED LED light source with rotating reflector. LED. Rotating Halogen Halogen bulb light source with rotating reflector.

Lighting Symbols. Rotating LED LED light source with rotating reflector. LED. Rotating Halogen Halogen bulb light source with rotating reflector. LED Technology Unrivalled lifespan of up to 100,000 hours together with low power consumption and resistance to high levels of shock and vibration make LEDs the ideal light source for emergency lighting.

More information

NEW NEW. 650m .00. m 1LUX. 600m FEATURES: High Colour Rendering. Index (CRI) at 5000 K WITH TWO LAMPS* Signature L.E.

NEW NEW. 650m .00. m 1LUX. 600m FEATURES: High Colour Rendering. Index (CRI) at 5000 K WITH TWO LAMPS* Signature L.E. E N H A N C E D O P T I C L. E. D D R I V I N G L I G H T S HIGH POWERED L.E.D DRIVING LIGHT 820.00 KIT Ultima 225 L.E.D Combination Driving Light Kit, 225mm dia. P/No. 71705 480.00 PER LAMP FEATURES:

More information

LED / 24 Volt LED Work Lamp. LED / 24 Volt LED Work Lamp. XWL-700 Compact HID Xenon Work Lamp. Table of Contents

LED / 24 Volt LED Work Lamp. LED / 24 Volt LED Work Lamp. XWL-700 Compact HID Xenon Work Lamp. Table of Contents LED-100 12 / 24 Volt LED Work Lamp LED-700 12 / 24 Volt LED Work Lamp XWL-700 Compact HID Xenon Work Lamp Table of Contents LED Work Lights...1 LED Specialty Lighting...2 LED Utility Lights...3 Xenon HID

More information

Lighting Symbols 100 KM/H

Lighting Symbols 100 KM/H LED Technology Unrivalled lifespan of up to 100,000 hours together with low power consumption and resistance to high levels of shock and vibration make LEDs the ideal light source for emergency lighting.

More information

Visit us at www. sgidistributorsltd.com

Visit us at www. sgidistributorsltd.com 41-1610 9 Volt Mastercell Alkaline 41-1620 D Cell 2pk Mastercell Alkaline 41-1622 AA 2pk Mastercell Alkaline 41-1623 AAA 2pk Mastercell Alkaline 41-1624 AAA 4pk Mastercell Alkaline 41-1632 C Cell 2pk Mastercell

More information

TECHNICAL INFO 92 x 148 x 65 mm / 3.6 x 5.8 x 2.5 inches. LED 18 watts. TECHNICAL INFO 109 x 134 x 83 mm / 4.3 x 5.3 x 3.25 inches.

TECHNICAL INFO 92 x 148 x 65 mm / 3.6 x 5.8 x 2.5 inches. LED 18 watts. TECHNICAL INFO 109 x 134 x 83 mm / 4.3 x 5.3 x 3.25 inches. LED PART# 01252888 Dimensions 92 x 148 x 65 mm / 3.6 x 5.8 x 2.5 inches Type Partial flux Rating Mounting Hardware Cable LED 18 watts 1350 lumen IP67 stainless steel 15 inches 12-28 VDC PART# 01253002

More information

Work Lighting Lampe de Travail Iluminación de Trabajo

Work Lighting Lampe de Travail Iluminación de Trabajo Work ing 119 TRILLIANT CUBE LED WORK LAMPS TIER 1 OUTPUT Compact 4 x 4 lamps available in 1200 lumen model Highest quality electronic components and advanced Grote circuit design provides electronically

More information

LED Tractor/Utility Lamps Mini Catalogue

LED Tractor/Utility Lamps Mini Catalogue QUALITY PRODUCTS FROM A PROVEN SUPPLIER LED Tractor/Utility Lamps Mini Catalogue p2 p2 p5 p5 p3 p3 p2 p2 p3 p4 p3 p3 p4 p4 Catalogue Number #2013TUL p4 p6 p5 p8 p7 p7 p7 p6 p7 p6 p6 2" ROUND (MINI) TRACTOR/UTILITY

More information

Rechargeable HID Handheld Light - RL-11

Rechargeable HID Handheld Light - RL-11 Rechargeable HID Handheld Light - RL-11 Part #: RL-11 Page: 1 The RL-11 from Larson Electronics is a Rechargeable HID Handheld Light that contains a 35 watt HID bulb and produces 3,200 lumens of intense

More information

Innovative Lighting and Electronic Solutions Product Catalogue

Innovative Lighting and Electronic Solutions Product Catalogue Innovative Lighting and Electronic Solutions 2014 Product Catalogue Our Story Hamsar originated with the entrepreneurial spirit of the President, Fred Kelly to create his own company more than 30 years

More information

EMERGENCY LIGHTS DRIVING LIGHTS SPOTLIGHTS LED LIGHTS WORK LIGHTS BAR LIGHTS MINI LIGHTS WARNING LIGHTS

EMERGENCY LIGHTS DRIVING LIGHTS SPOTLIGHTS LED LIGHTS WORK LIGHTS BAR LIGHTS MINI LIGHTS WARNING LIGHTS LIGHTING 07 EMERGENCY LIGHTS NARVA 07-1 VISION ALERT 07-3 LED AUTOLAMPS 07-4 DRIVING LIGHTS NARVA 07-5 SPOTLIGHTS LIGHTFORCE 07-7 LED LIGHTS GREAT WHITE 07-15 WORK LIGHTS NARVA 07-18 TCM 07-19 REVOLUTION

More information

10 lighting. 2 Work Lights 5 Lamps & Mounting Accessories 5 LED Lamps & Mounting Accessories 9 Work Lamps 10 Incandescent Lamps 12 Bulbs

10 lighting. 2 Work Lights 5 Lamps & Mounting Accessories 5 LED Lamps & Mounting Accessories 9 Work Lamps 10 Incandescent Lamps 12 Bulbs 10 lighting 2 Work Lights 5 Lamps & Mounting Accessories 5 LED Lamps & Mounting Accessories 9 Work Lamps 10 Incandescent Lamps 12 Bulbs JULY LIGHTING 1 RECHARGEABLE METAL LED LAMP Art. No. 827.805300 Technical

More information

FLOODLIGHTS SITE LAMPS SPOTLIGHTS WORKLIGHTS HEAD LIGHTS FLASHLIGHTS

FLOODLIGHTS SITE LAMPS SPOTLIGHTS WORKLIGHTS HEAD LIGHTS FLASHLIGHTS FLOODLIGHTS SITE LAMPS SPOTLIGHTS WORKLIGHTS HEAD LIGHTS FLASHLIGHTS 2 4 7 8 13 16 LED 27W FLOODLIGHT LED-511 1600 12V DC 24V DC Ideal for outdoor use on construction equipment, tractors, farm machinery,

More information

TRAILBLAZER LIGHTING TRAILBLAZER LIGHTING

TRAILBLAZER LIGHTING TRAILBLAZER LIGHTING Emergency Wind-Up Flashlight 1 minute wind-up generates 30 minutes of continuous bright illumination 3 ultra bright L.E. D. for super bright light two brightness setting at the click of a button Flatlight

More information

See Beyond. Ultimate performance from the ultimate range of driving lights. Edition 10.1

See Beyond. Ultimate performance from the ultimate range of driving lights.  Edition 10.1 See Beyond www.xrayvision.net Edition 10.1 Ultimate performance from the ultimate range of driving lights X2 X3 Xray Vision. See Beyond. Ultimate performance from the ultimate range of driving lights.

More information

Reference Manual WL Worklamps

Reference Manual WL Worklamps Reference Manual WL 9 Worklamps Contents Heavy Duty LED N LED N5 LED Mission Statement To become the preferred supplier of electrical, lighting and safety solutions for mobile plant and equipment in the

More information

Forward Lighting Phares Utilitaires Faros Delanteros

Forward Lighting Phares Utilitaires Faros Delanteros Forward Lighting 135 LED SEALED BEAM REPLACEMENT HEADLAMP BULBS FEATURES & BENEFITS Designed to swap into existing housings that H6024 (90941-5) and H6054 (90951-5) currently fit into. Designed for a standard

More information

The next generation of high performance lighting systems has arrived.

The next generation of high performance lighting systems has arrived. 2014 Lighting catalog The next generation of high performance lighting systems has arrived. Pro Comp Explorer lights are designed for the off-road enthusiast who demands the best. After nearly 20 years

More information

VEHICLE LAMPS, BEACONS & REFLECTORS

VEHICLE LAMPS, BEACONS & REFLECTORS VEHICLE LAMPS, BEACONS & REFLECTORS CALL 0383 7984 ORDER ONLINE unitedindustrial.co.uk FREE DELIVERY ON ORDERS OVER 75* BEACONS /4V Rotating Beacon Bolt Mounted Suitable for both V and 4V applications.

More information

SEALED BEAM: Pair Pack LH RH. SEALED BEAM WITH CONNECTOR: Pair Pack LH RH.

SEALED BEAM: Pair Pack LH RH. SEALED BEAM WITH CONNECTOR: Pair Pack LH RH. 122 Forward Lighting 64291-4 Per-Lux Snowplow Lamps Resilient, polycarbonate housing and halogen sealed beam withstands hours of use at sub-zero temperatures Features integrated parking and turn signal

More information

L.E.D DRIVING LIGHTS & LIGHT BARS

L.E.D DRIVING LIGHTS & LIGHT BARS L.E.D DRIVING LIGHTS & LIGHT BARS 2018/19 PRODUCT RANGE For more on Narva s L.E.D range visit narva.com.au VR DRIVING LIGHT EXPERIENCE TURN FOR DETAILS PUT YOURSELF IN THE FRONT SEAT. Now you can test

More information

6 Million Candlepower Spotlight with Handle - 800' Long x 65' Wide Spot Beam - 12 / 24 Volts DC

6 Million Candlepower Spotlight with Handle - 800' Long x 65' Wide Spot Beam - 12 / 24 Volts DC 6 Million Candlepower Spotlight with Handle - 800' Long x 65' Wide Spot Beam - 12 / 24 Volts DC Part #: HUL-18 Page: 1 Buy American Compliant The Larson Electronics HUL-18 Spotlight is a rugged and effective

More information

2014 / Verlichting

2014 / Verlichting 14 / 15 Verlichting SPOTLIGHT - HALOGEN SUNNEX HT 10W HALOGEN Sunnex HT is a small and convenient universal light which is ideally suited for all types of precision work. Supplied with a 10W halogen bulb,

More information

TOTAL LIGHTING SOLUTIONS

TOTAL LIGHTING SOLUTIONS ProBuilt Professional Lighting, LLC TOTAL LIGHTING SOLUTIONS Innovative job site lighting solutions for construction, manufacturing and industrial trades. R Wobblelight 36 " Portable Jobsite Lighting

More information

Magnetic Mount 60 Watt Low Profile LED Flood Light - Glare Shield - 10' Cord V AC

Magnetic Mount 60 Watt Low Profile LED Flood Light - Glare Shield - 10' Cord V AC Magnetic Mount 60 Watt Low Profile LED Flood Light - Glare Shield - 10' Cord - 120-277V AC Part #: LEDWP-600E-M-10C Page: 1 The LEDWP-600E-M-10C Magnetic Mount LED Flood Light offers high light output

More information

10 Searchlights INTRODUCTION

10 Searchlights INTRODUCTION 82 10 Searchlights INTRODUCTION A marine searchlight has to be capable of performing a range of tasks from locating buoys to illuminating a narrow channel and, occasionally, searching for a man overboard.

More information

25W Handheld LED Spotlight w/ 100' 12/3 SOOW Cord Reel & Inline Transformer VAC to 24VDC

25W Handheld LED Spotlight w/ 100' 12/3 SOOW Cord Reel & Inline Transformer VAC to 24VDC 25W Handheld LED Spotlight w/ 100' 12/3 SOOW Cord Reel & Inline Transformer - 100-277VAC to 24VDC Part #: HUL-LED25WRE-12.3-100GCR-24I Page: 1 The HUL-LED25WRE-12.3-100GCR-24I from Larson Electronics is

More information

The next generation of high performance lighting systems has arrived.

The next generation of high performance lighting systems has arrived. 2014 Lighting catalog The next generation of high performance lighting systems has arrived. Pro Comp Explorer lights are designed for the off-road enthusiast who demands the best. After nearly 20 years

More information

DMK, Inc Coye Drive Stevens Point, WI USA Phone: Fax:

DMK, Inc Coye Drive Stevens Point, WI USA Phone: Fax: lighting 2 DMK provides a complete range of LED, HID, and halogen work lights designed for off-road applications. Work lights are developed in Family Groups so that OEMs can maintain a consistent design

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION DATE: November 2014 DESCRIPTION: ARB Intensity LED APPLICATION: Auxiliary Vehicle Lighting PART NO. : AR21S - ARB Intensity 21 LED Spot AR21F - ARB Intensity 21 LED Flood PRODUCT GROUP: 399 - ARB BARCODE:

More information

Interior Lighting Lumières d Intérieur Lámparas para Interior

Interior Lighting Lumières d Intérieur Lámparas para Interior Interior Lighting 99 LED WhiteLight Recessed-Mount Dome Lamp FEATURES & BENEFITS Encapsulant potting for total circuit board protection Robust, one-piece, aluminum housing and removable acrylic lens (LED

More information

OFF-ROAD LED LIGHTING GUIDE

OFF-ROAD LED LIGHTING GUIDE OFF-ROAD LED LIGHTING GUIDE CONTENTS LED Lighting to Outfit Your Entire Rig! 3 9 10 16 LED HEADLIGHTS LED SIGNAL LIGHTS LED FOG LIGHTS LED AUXILIARY LIGHTS ABOUT J.W. SPEAKER Established in 1935, J.W.

More information

PLUTO SPOTLIGHT - LED. Features include. Applications. Benefits

PLUTO SPOTLIGHT - LED. Features include. Applications. Benefits Spotlight LED SPOTLIGHT - LED PLUTO Pluto is a designed LED light for industrial and other applications where a small size & flexibility is of importance. Typical application areas: machine tools, vehicles,

More information

25W Red LED Warning Spotlight Lumens - 347/480V AC 1PH - Red Safety Light - IP67

25W Red LED Warning Spotlight Lumens - 347/480V AC 1PH - Red Safety Light - IP67 25W Red LED Warning Spotlight - 2250 Lumens - 347/480V AC 1PH - Red Safety Light - IP67 Part #: LEDWL-CRN-RED-480V.1P Page: 1 The LEDWL-CRN-RED-480V.1P from Larson Electronics is a High Intensity Red LED

More information

FLOODLIGHTS SITE LAMPS SPOTLIGHTS WORKLIGHTS HEAD LIGHTS FLASHLIGHTS

FLOODLIGHTS SITE LAMPS SPOTLIGHTS WORKLIGHTS HEAD LIGHTS FLASHLIGHTS GL-02 THE ENDLESS FLOODLIGHTS SITE LAMPS SPOTLIGHTS WORKLIGHTS HEAD LIGHTS FLASHLIGHTS 2 4 7 8 13 16 LED 27W FLOODLIGHT LED-511 1600 12V DC 24V DC Ideal for outdoor use on construction equipment, tractors,

More information

DUAL BRACKET DUAL BRACKET Dual bracket for positioning of two lamps available for NOVA and VEGA new work lights

DUAL BRACKET DUAL BRACKET Dual bracket for positioning of two lamps available for NOVA and VEGA new work lights // High stability tripod adjustable up to 3m The SCANGRIP TRIPOD is indispensable for stationary positioning of the work light for illumination in a specific working area. The SCANGRIP TRIPOD is extendable

More information

300W Portable LED Work Area Light Cart w/ Extension Pole - Rechargeable Battery - Cordless Operation

300W Portable LED Work Area Light Cart w/ Extension Pole - Rechargeable Battery - Cordless Operation 300W Portable LED Work Area Light Cart w/ Extension Pole Rechargeable Battery Cordless Operation Part #: WALRPSWBC2X150LED10X Page: 1 Made in the USA The Larson Electronics WALRPSWBC2X150LED10FT Cart Mounted

More information

Work Lights & Cord Reels

Work Lights & Cord Reels Industrial Trouble Lights 75 watts Lightweight design Rugged impact resistant housing Grounded 25' cord On/Off switch handle Includes: Hanging hook and electric outlet No. XC660 & Cord Reels Industrial

More information

We have a large stock of

We have a large stock of We have a large stock of XENON STROBE LIGHTS ROTATING LIGHTS WORK LIGHTS REVERSE LIGHTS LIGHTING KITS DRIVING LIGHTS LIGHT RAILS INDICATOR LIGHTS LIGHTING ACCESSORIES SIGNALS, LIGHTING & BULBS For special

More information

NEW in EL2009. LED Vision Rotating Beacon. LED Vision Rotating Specifications

NEW in EL2009. LED Vision Rotating Beacon. LED Vision Rotating Specifications LED Vision Rotating Beacon Die-cast metal base Dual voltage 12V 24V NO GEARSG NO BRUSHES Patented Hybrid Drive technology. No gears, no belts, no brushes Sealed IP67 Vision Alert introduces a true rotating

More information

25W Rechargeable LED Spotlight ' Beam - 8aH Battery - Wireless Remote - Magnetic Mount

25W Rechargeable LED Spotlight ' Beam - 8aH Battery - Wireless Remote - Magnetic Mount 25W Rechargeable LED Spotlight - 1000' Beam - 8aH Battery - Wireless Remote - Magnetic Mount Part #: LED25WRE-RPS.8AH-WR-M The LED25WRE-RPS.8AH-WR-M Rechargeable LED Spotlight is ideal for a wide variety

More information

FoRWaRD. lighting.

FoRWaRD. lighting. FoRWaRD lighting www.truck-lite.eu.com Truck-Lite Europe Ltd is a global leader in the design and manufacturing of vision systems; servicing the Automotive and Commercial Vehicle Industry. For ninety years,

More information

7118 Series Halogen Deck Floodlights

7118 Series Halogen Deck Floodlights 7118 Series Halogen 7118 Series Fibre reinforced housing and Free Form reflector for close range homogeneous illumination. Off White Housing Structured Lens - Hella 'Free Form' reflector technology - and

More information

CLAMP LAMPS. Spring Clamp. Anodized Aluminum Reflectors. Anodized Aluminum Reflectors. Power ON/OFF Switch in the Socket

CLAMP LAMPS. Spring Clamp. Anodized Aluminum Reflectors. Anodized Aluminum Reflectors. Power ON/OFF Switch in the Socket CLAMP LAMPS Anodized Aluminum Reflectors Power ON/OFF Switch in the Socket Uses Type A Bulb (Bulb Not Included) Works with CFL, LED & Incandescent Bulbs 6ft 18/2 SPT-2 Cord Anodized Aluminum Reflectors

More information

Hydraulic Light Tower with Diesel Engine Generator - 4X1250 Watt Metal Halide Lamps

Hydraulic Light Tower with Diesel Engine Generator - 4X1250 Watt Metal Halide Lamps Hydraulic Light Tower with Diesel Engine Generator - 4X1250 Watt Metal Halide Lamps Part #: WCDE-4-MLK Page: 1 Made in the USA The WCDE-4-MLK from Larson Electronics is a metal halide floodlight tower

More information

60 Watt LED Light Bar - 6 X 10 WATT LEDs - Aluminum Housing Lumens - Adjustable Locking Base

60 Watt LED Light Bar - 6 X 10 WATT LEDs - Aluminum Housing Lumens - Adjustable Locking Base 60 Watt LED Light Bar - 6 X 10 WATT LEDs - Aluminum Housing - 5400 Lumens - Adjustable Locking Base Part #: LED10W-6R-ALB Buy American Compliant The Larson Electronics LED10W-6R-ALB LED Light Emitter offers

More information

LED Technology. Evolution Design. Hybrid Drive. Lighting Symbols

LED Technology. Evolution Design. Hybrid Drive. Lighting Symbols LED Technology Unrivalled lifespan of up to 100,000 hours together with low power consumption and resistance to high levels of shock and vibration make LEDs the ideal light source for emergency lighting.

More information

Lighting conditions. Always one idea ahead.

Lighting conditions. Always one idea ahead. Lighting conditions Always one idea ahead. A world of unlimited possibilities. It is environmentally friendly. It is efficient. It is convenient. It is not without reason that LED lights are growing ever

More information

lighting Vol

lighting Vol Vol. 1 lighting Vol. 1-2013 DMK provides a complete range of LED, HID, and halogen work lights designed for off-road applications. Work lights are developed in Family Groups so that OEMs can maintain a

More information

21W High Intensity Bar Clamp Mounted LED Light - (7) 3W LEDs V DC Foot Spot Beam

21W High Intensity Bar Clamp Mounted LED Light - (7) 3W LEDs V DC Foot Spot Beam 21W High Intensity Bar Clamp Mounted LED Light - (7) 3W LEDs - 12-32V DC - 575 Foot Spot Beam Part #: BCML-LED-21R Page: 1 Made in the USA The BCML-LED-21R from Larson Electronics is a Bar Clamp Mount

More information

5 Million Candlepower Handheld Spotlight- Red Hunting Lens Watt Halogen - Spot/Flood Combo

5 Million Candlepower Handheld Spotlight- Red Hunting Lens Watt Halogen - Spot/Flood Combo 5 Million Candlepower Handheld Spotlight- Red Hunting Lens - 100 Watt Halogen - Spot/Flood Combo Part #: HL-85-RED Page: 1 This lightweight, ultra rugged, ergonomic handheld Larson Electronics spotlight

More information

9 Watt High Output LED Light Emitter on Magnetic Base Goose-Neck Arm V

9 Watt High Output LED Light Emitter on Magnetic Base Goose-Neck Arm V 9 Watt High Output LED Light Emitter on Magnetic Base Goose-Neck Arm - 120-277V Part #: LED40W-GNM Page: 1 Made in the USA The LED40W-GNM LED High Output LED Light Emitter on Adjustable Gooseneck Arm and

More information

JLG UTILITY VEHICLES

JLG UTILITY VEHICLES JLG UTILITY VEHICLES 1 MORE MATERIALS. MORE PEOPLE. ONLY IN YOUR JLG UTV. With a rugged design, heavy-duty drive system and class-leading cargo capacity, JLG utility vehicles outlast the competition and

More information

LED STEP LIGHT LED Forms

LED STEP LIGHT LED Forms LED STEP LIGHT LED Forms OUTDOOR INDOOR Inspiration will come in abundance once you try our LED accent step lights. Use them outdoors on your deck or on the stairs inside of your home. You will be truly

More information

20W LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - Class 1 Division 2

20W LED Strip Light for Hazardous Location Lighting - 24 Surface Mount Bar - Class 1 Division 2 20W LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - Class 1 Division 2 Part #: HAL-24-16W-LED Page: 1 Buy American Compliant The Larson Electronics HAL-24-16W-LED is a low profile

More information

25 Watt Magnetic LED Light - 250W Metal Halide Equivalent Watt High Output LEDs - LEDWP-250

25 Watt Magnetic LED Light - 250W Metal Halide Equivalent Watt High Output LEDs - LEDWP-250 25 Watt Magnetic LED Light - 250W Metal Halide Equivalent - 12 2-Watt High Output LEDs - LEDWP-250 Part #: LEDWP-250-M Made in the USA The LEDWP-250-M LED Blasting Light offers high light output from a

More information

20W LED Strip Light for Hazardous Location - 24" Surface Mount Bar - Motion, Day/Night Sensor - C1D2

20W LED Strip Light for Hazardous Location - 24 Surface Mount Bar - Motion, Day/Night Sensor - C1D2 20W LED Strip Light for Hazardous Location - 24" Surface Mount Bar - Motion, Day/Night Sensor - C1D2 Part #: HAL-24-16W-LED-DNMS Page: 1 Buy American Compliant The HAL-24-16W-LED-DNMS from Larson Electronics

More information

Lighting. When adequate illumination is not obtainable by permanent lighting sources, temporary lighting may be used as supplementation.

Lighting. When adequate illumination is not obtainable by permanent lighting sources, temporary lighting may be used as supplementation. When adequate illumination is not obtainable by permanent lighting sources, temporary lighting may be used as supplementation. Visit www.osha.gov for complete details and regulation requirements. 0780

More information

Contents HELLA Workshop

Contents HELLA Workshop HELLA Workshop HELLA offers a comprehensive range of high quality inspection lamps and testing equipment that is designed to meet the needs of discerning do-it-yourself and professional technicians. Contents

More information

License Plate Lamps LICENSE PLATE LAMPS LICENSE PLATE LAMPS

License Plate Lamps LICENSE PLATE LAMPS LICENSE PLATE LAMPS License Plate Lamps 437 series LICENSE PLATE LAMPS 437-00, 10: 10-15/16" L. x 4-5/8" H. x 2-3/16" D. Two 1/4 mtg. holes on 2-1/2" centers. 437-08, 11: 4-1/8" L. x 3-7/16" H. x 2-3/16" D. Two 1/4" mtg.

More information

2016 LIGHTING PRODUCTS CATALOG

2016 LIGHTING PRODUCTS CATALOG 16 LIGHTING PRODUCTS CATALOG ALUMINUM FLASHLIGHT REGULAR FLASHLIGHT RECHARGEABLE FLASHLIGHT LANTERN SPOTLIGHT & WORKLIGHT HEADLIGHTS LED KEY RING LED KEY CHAIN SPECIAL LED LIGHT The EverBrite team of engineers

More information

18 Watt LED Spotlight with Magnetic Base - Articulating Light Head Tilting - IP65-25' Cord w/ Plug

18 Watt LED Spotlight with Magnetic Base - Articulating Light Head Tilting - IP65-25' Cord w/ Plug 18 Watt LED Spotlight with Magnetic Base - Articulating Light Head Tilting - IP65-25' Cord w/ Plug Part #: MLBLT-18W-LED-25 Page: 1 The MLBLT-18W-LED-25 from Larson Electronics offers high purity optics,

More information

POWER ACCESSORIES SOCKET ASSEMBLIES CIGARETTE LIGHTER PLUGS BATTERY DISCHARGE PROTECTOR VOLTAGE REDUCERS VOLTAGE CONVERTER VOLTAGE BOOSTER INVERTERS

POWER ACCESSORIES SOCKET ASSEMBLIES CIGARETTE LIGHTER PLUGS BATTERY DISCHARGE PROTECTOR VOLTAGE REDUCERS VOLTAGE CONVERTER VOLTAGE BOOSTER INVERTERS SOCKET ASSEMBLIES CIGARETTE LIGHTER PLUGS BATTERY DISCHARGE PROTECTOR VOLTAGE REDUCERS VOLTAGE CONVERTER VOLTAGE BOOSTER INVERTERS SOCKET ASSEMBLIES 853010BL Blister Pack Surface Mount Aluminum Accessory

More information

ROKLUME S700 LED WORKLIGHTS

ROKLUME S700 LED WORKLIGHTS ROKLUME S700 LED WORKLIGHTS CLOSE RANGE AND LONG RANGE OPTIONS The RokLUME S700 LED Worklight series has been extended to include two different beam patterns - close range or long range, making it a great

More information

SAFETY LED LIGHTS. Work Light Heavy Duty. Work Light Heavy Duty

SAFETY LED LIGHTS. Work Light Heavy Duty. Work Light Heavy Duty Work Light Heavy Duty Flashlight Floodlight Dual-light Rechargeable Anti-roll Tri-Lobal Design Bright LEDs 50,000 hour life Microprocessor controlled Impact and chemical resistant housing Replaceable NiMH

More information

Luminaires - LED High Bay

Luminaires - LED High Bay 80 LED High Bay With STANDARD s high bay line, it is now easy to modernize your commercial or industrial applications; it is the perfect alternative for your traditional lighting system. Our high efficacy

More information

PROMPT TRADING CO. Ph. No.:

PROMPT TRADING CO.   Ph. No.: 5 From site lighting for construction workers, inspection lights for the workshops to torches & headlights - we have a wide range of lighting solutions fo or professionals & home users www.groz-tools.com

More information

160 Watt High Intensity LED Flood Light - 24 LEDs - 20,500 Lumens W Halogen Equivalent

160 Watt High Intensity LED Flood Light - 24 LEDs - 20,500 Lumens W Halogen Equivalent 160 Watt High Intensity LED Flood Light - 24 LEDs - 20,500 Lumens - 1000W Halogen Equivalent Part #: LEDL-160W Page: 1 Buy American Compliant The LEDL-160W LED Flood Light offers high output from a compact

More information

Leading the Green Initiatives

Leading the Green Initiatives Leading the Green Initiatives Marine/Industrial LED Lighting Solutions Catalogue 216 MODULE SERIES GLOWING IN DARKNESS SOP LED Module Series is designed to be energy efficient and highly versatile. It

More information

Innovative Lighting and Electronic Solutions 2016 PRODUCT CATALOGUE

Innovative Lighting and Electronic Solutions 2016 PRODUCT CATALOGUE Innovative Lighting and Electronic Solutions 2016 PRODUCT CATALOGUE ISO9001:2008 OHSAS 18001:2007 ISO14001:2004 OUR STORY Hamsar originated with the entrepreneurial spirit of the President, Fred Kelly

More information

LED LINEAR QUICK SUMMARY CO W SI MODEL CORTANA

LED LINEAR QUICK SUMMARY CO W SI MODEL CORTANA LED LINEAR CORTANA This simple and elegant suspended LED linear light with wide optics is ideal for general uniform ambient lighting applications where clean, modern architectural design is required. Use

More information

Revel Scout. Revel Scout Tactical LED Work Light ELRE-SCOUT. AKRON BRASS COMPANY PH ( ) akronbrass.com

Revel Scout. Revel Scout Tactical LED Work Light ELRE-SCOUT. AKRON BRASS COMPANY PH ( ) akronbrass.com AKRON BRASS COMPANY PH. 800.228.1161 (330.264.5678) akronbrass.com Revel Scout Tactical LED Work Light ELRE-SCOUT This tactical LED scene light is designed to increase the safety of both firefighters and

More information

Evolution Design. LED Technology. Hybrid Drive

Evolution Design. LED Technology. Hybrid Drive LED Technology Unrivalled lifespan of up to 100,000 hours together with low power consumption and resistance to high levels of shock and vibration make LEDs the ideal light source for emergency lighting.

More information

1watt LED Clip Flashlight

1watt LED Clip Flashlight FL 1 Flexible 3 LED / UV Light Inspection Light with Magnetic Adjustable for All Illuminating Purpose. Can be firmly attached to any metallic surface. LR-44 Battery x 3 PCS is included. Patent Pending

More information

about us WaRRaNtY StatEMENt GENERaL DIScLaIMER copyright PRotEctIoN

about us WaRRaNtY StatEMENt GENERaL DIScLaIMER copyright PRotEctIoN about us ImpactLED is a family owned Australian company. We may be a small company, but we have big alliances with factories across Europe, Asia and North America. We started out 10 years ago developing

More information

High Intensity 20 Watt LED Handheld Spotlight - 16' Coil Cord with Cigarette Plug

High Intensity 20 Watt LED Handheld Spotlight - 16' Coil Cord with Cigarette Plug High Intensity 20 Watt LED Handheld Spotlight - 16' Coil Cord with Cigarette Plug Part #: HUL-LEDP2X10W Buy American Compliant The Larson Electronics HUL-LEDP2X10W Spotlight is a rugged and effective LED

More information

16 Watt White LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - C1D2

16 Watt White LED Strip Light for Hazardous Location Lighting - 24 Surface Mount Bar - C1D2 16 Watt White LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - C1D2 Part #: HAL-24-16W-LED-WHT Page: 1 Buy American Compliant The HAL-24-16W-LED-WHT from Larson Electronics is

More information

High Performance LED High Bays

High Performance LED High Bays High Performance LED High Bays www.vm5lighting.com 135 Lumens Per Watt Our DLC 4.0 Premium LEDs shine bright while using less energy than most high bays. High performance high bay built for versatitlity.

More information

Portable, Rechargeable LED Light Tower - 6, 10-Watt LEDs Lumen Hour Runtime

Portable, Rechargeable LED Light Tower - 6, 10-Watt LEDs Lumen Hour Runtime Portable, Rechargeable LED Light Tower - 6, 10-Watt LEDs - 5400 Lumen - 6.5 Hour Runtime Part #: LED10W-6RT-LT Page: 1 Made in the USA The LED10W-6R-LT LED light tower is a fully portable and rechargeable

More information

all off-road applications to the commercial, industrial, marine, agricultural and leisure markets.

all off-road applications to the commercial, industrial, marine, agricultural and leisure markets. 0-420-55 LED WORK LAMPS October 2014 all off-road applications to the commercial, industrial, marine, agricultural and leisure markets. Why choose Durite LED work lamps? Weatherproof and robust housing

More information

AUXILIARY LIGHTS LIGHTS

AUXILIARY LIGHTS LIGHTS AUXILIARY LIGHTS LIGHTS LED LED LIGHT LIGHT BARS BARS WORK WORK LIGHTS LIGHTS Agricultural vehicles 2 3 HELLA VALUEFIT PROVEN QUALITY AT A GOOD PRICE. HELLA VALUEFIT is a specific range designed exclusively

More information

S T I N G E R L E D STINGER LED

S T I N G E R L E D STINGER LED The original Stinger set the standard for duty lights. Now the new Stinger LED raises that standard to a whole new level. It has multiple lighting options, including a strobe and a super bright, white-hot,

More information

High Intensity Colored LED Light - 90 Watts - 30 LEDs - Red, Amber, Green, Blue

High Intensity Colored LED Light - 90 Watts - 30 LEDs - Red, Amber, Green, Blue High Intensity Colored LED Light - 90 Watts - 30 LEDs - Red, Amber, Green, Blue Part #: LEDP5W-30XC Page: 1 Buy American Compliant The LEDP5W-30XC LED Light offers high output from a compact form factor

More information

H (g. 00 H (g. Product Overview

H (g. 00 H (g. Product Overview @t H (g ru C 00 H (g ru,i Product Overview 2018-2019 LED WARNING LIGHTS & LIGHTBARS WARNING LIGHT WARNING LAMP WARNING LAMP WARNING LAMP WARNING LAMP 6 Amber LEDs /87 145*30*35mm 12/30V 6 Amber LEDs ECE

More information

HID Golight Stryker - 35 Watts Lumen - Wireless Remote Control - White - Spot Beam

HID Golight Stryker - 35 Watts Lumen - Wireless Remote Control - White - Spot Beam HID Golight Stryker - 35 Watts - 3000 Lumen - Wireless Remote Control - White - Spot Beam Part #: GL-3000H The GL-3000H HID Golight Stryker from Larson Electronics produces a 3,000 lumen light beam capable

More information

Professional LED work lights See better, work better

Professional LED work lights See better, work better Professional LED work lights 2018-2019 See better, work better Defeat darkness When you re repairing or maintaining vehicles, there s no room for errors. Our professional workshop lamps feature powerful

More information

14W Linear 2' LED Light Lumens - IP66 - UL 1598A - Stainless Steel Mounting Brackets/Hardware

14W Linear 2' LED Light Lumens - IP66 - UL 1598A - Stainless Steel Mounting Brackets/Hardware 14W Linear 2' LED Light - 1750 Lumens - IP66 - UL 1598A - Stainless Steel Mounting Brackets/Hardware Part #: WDL-24-1L-SS-2X5FT Page: 1 Made in Texas Providing 1,750 lumens of clean, crisp white light

More information

LIGHTS LIGHTING Vol

LIGHTS LIGHTING Vol LIGHTS LIGHTING Vol. 2-2014 DMK provides a complete range of LED, HID, and halogen work lights designed for off-road applications. Work lights are developed in Family Groups so that OEMs can maintain a

More information

Cordless LED Lamps. Compatible with all standard leak detection dyes Powered by a rechargeable NiMH battery 120V, 230V, 240V or 100V smart AC charger

Cordless LED Lamps. Compatible with all standard leak detection dyes Powered by a rechargeable NiMH battery 120V, 230V, 240V or 100V smart AC charger Cordless LED Lamps TP-8690UV OPTIMAX 365 Cordless, Rechargeable UV Leak Detection Flashlight (Patent Pending) Makes Even Dirty Diesel Engine Oil Leaks Glow Brightly! State-of-the-art, ultra-high intensity

More information

WORKPLUS. signaling devices for workplace vehicles GENERAL CATALOGUE

WORKPLUS. signaling devices for workplace vehicles GENERAL CATALOGUE WORKPLUS signaling devices for workplace vehicles GENERAL CATALOGUE WORKPLUS signaling devices for workplace vehicles INDEX INTRODUCTION...2-3 LUMINOUS AND ACOUSTIC DEVICES FOR WORKPLACE VEHICLES...4-14

More information

Australian made led lighting solutions

Australian made led lighting solutions Australian made led lighting solutions industrial & commercial applications 124 Siganto Drive, Helensvale, Queensland, Australia 4212 Ph: 1300 14 55 55 info@aqualuma.com WWW.AQUALUMA.COM Company Profile

More information

Explosion Proof Light - Class 1 Division 2 Light - 5 hour Run Time Li-ion Battery - MADE IN THE USA

Explosion Proof Light - Class 1 Division 2 Light - 5 hour Run Time Li-ion Battery - MADE IN THE USA Explosion Proof Light - Class 1 Division 2 Light - 5 hour Run Time Li-ion Battery - MADE IN THE USA Part #: RUL-9-FR Page: 1 Larson Electronics LLC Made in The USA The RUL-9-FR Hazardous Area Portable

More information

LED Golight Stryker - Remote Controlled Spotlight w/ Wired Dash Mount Controller - White

LED Golight Stryker - Remote Controlled Spotlight w/ Wired Dash Mount Controller - White LED Golight Stryker - Remote Controlled Spotlight w/ Wired Dash Mount Controller - White Part #: GL-30204 The GL-30204 LED Golight Stryker from Larson Electronics produces a 2,520 lumen light beam capable

More information

Aldebaran lamps the perfect lighting solution for mobile applications

Aldebaran lamps the perfect lighting solution for mobile applications Aldebaran lamps the perfect lighting solution for mobile applications Our task was to design a heavy-duty, high performance lighting system for a vast range of applications. This lead to the creation of

More information

All our Eterna Emergency Exit Signage comply with current Exit Signage Regulations using the Signs Directive format.

All our Eterna Emergency Exit Signage comply with current Exit Signage Regulations using the Signs Directive format. PAGE 28 EMERGENCY EXIT SIGNAGE GUIDANCE All our Eterna Emergency Exit Signage comply with current Exit Signage Regulations using the Signs Directive format. 4 Our Eterna legends fulfil the legal and technical

More information

LEDWP LED Wall Pack Light - 400W Metal Halide Equivalent - 12 LEDs - 10ft Cord High Output

LEDWP LED Wall Pack Light - 400W Metal Halide Equivalent - 12 LEDs - 10ft Cord High Output LEDWP-400 - LED Wall Pack Light - 400W Metal Halide Equivalent - 12 LEDs - 10ft Cord High Output Part #: LEDWP-400-10C Page: 1 The LEDWP-400-10C LED Wall Pack Light offers high light output from a compact

More information

96W Colored LED Light Bar - Completely Submersible 'L X 200'W Spot VDC Lumens

96W Colored LED Light Bar - Completely Submersible 'L X 200'W Spot VDC Lumens 96W Colored LED Light Bar - Completely Submersible - 1100'L X 200'W Spot - 9-42VDC - 5760 Lumens Part #: LEDXUL-32C Page: 1 Larson Electronics LLC Buy American Compliant The LEDXUL-32C from Larson Electronics

More information