MARKER & CLEARANCE CAB MARKERS IDENTIFICATION BARS 80-84

Transcription

1 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M MARKER & CLEARANCE CAB MARKERS IDENTIFICATION BARS SPACE SAVING & COST CUTTING Not every mounting application offers the space for marker lights at both front corners of the trailer, and some could simply do without the cost of two lamps so close together. That s where Truck-Lite PC Rated Combination lamps provide the perfect solution! STANDARD 2 LAMP SYSTEM By incorporating innovative optics that disperse the required amount of light in a range of directions, combination lamps can provide the legally output of two lamps when mounted at a 45 angle at the corner of the trailer. With the ability of a single lamp to function as two, you can save on space, save on the cost of a second lamp, and save on the current draw of multiple lamps. Additionally, fewer lamps also translate into less downtime and maintenance costs. The one lamp system is popular in mounting applications where space is at a premium, such as the upper rails. With the marker & clearance combination lamps using the same standard mounting holes and accessories as traditional marker lighting products, many options are available to help reduce costs and add to vehicle reliability. PC RATED (COMBINATION) 1 LAMP SYSTEM corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

2 MINI IN SIZE, ENORMOUSOUS IN LIGHT OUTPUT The transportation industry s smallest LED marker lamp measures less than 3/4 diameter when installed, and provides the same output of lamps many times it s size. Truck-Lite s patented line of 33 Series Mini-Marker LED lighting products provides solutions for applications where lamps couldn t previously find room, and offers trailer engineers and design manufacturers new trailer and door structure design flexibility. Available in P2 and PC options, the small lamp size require less current that other lighting alternatives, take up less space in installation, and reduce concerns of physical damage and heat entrapment. Equipped with a limited lifetime warranty, the lamps may be small in size, but provide a world of installation benefits and dependability that only Truck-Lite s 33 Series can offer! WHEN SPACE IS AT A PREMIUM Often, mounting applications call for lamps with a minimal surface depth to accommodate for specific mounting STANDARD 30 SERIES LED LAMP LOW PROFILE 30 SERIES LED LAMP PC RATED 30 SERIES LED LAMP LOW PROFILE PC RATED 30 SERIES LED LAMP STANDARD 33 SERIES LAMP PC RATED 33 SERIES LAMP rails, mounting brackets or problems with vehicle clearance. Many of Truck-Lite s Clearance & Marker products are designed in a compact, slim manner that allows them to maintain legal requirements, while significantly reducing the depth of the lamp. To help the cause even more,truck-lite offers combination PC-Rated lamps in low profile models, while still maintaining the combination lamp properties. This allows the lamp to not only serve as a low profile, space saving solution, but also allevaiated the need for extra lamps altogether. ID BARS & ASSEMBLIES Designed specifically to fit applications where mounting space is at a premium,truck-lite ID Bars provide an array of marker lamps within a single mounting unit. From stainless steel models to those made of solvent-resistant ABS, options are available with Truck-Lite 10, 15, 26, 30, 33 and 35 lamps incandescent and LED lamps. ID Bars are available with varying lamp spacing and thickness to accommodateate for a range of mounting applications All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M 43

3 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M PC RATED LAMPS P2 RATED LAMPS US patent # World s smallest LED marker lamp for the transportation industry Standard lamp exceeds P2 legal requirements PC lamps rated for combination clearance/marker applications Hard-wired lamp design is easily retrofitted LEDs draw less current, allowing more power for other vehicle requirements Electronics completely sealed in epoxy to resist corrosion & moisture Offers trailer engineers & design manufacturers new trailer & rear door structure design flexibility Reduces lighting costs due to physical damage & heat entrapment ID assemblies shown on page 80.75".75" 1.09" 1.16" 1.09" 1.16" P2 Rated Grommet Kits 33050R Red 33050Y Yellow P2 Rated Black Flange Kits 33051R Red 33051Y Yellow PC Rated Grommet Kits 33075R Red 33075Y Yellow PC Rated Black Flange Kits 33080Y Yellow.665".719".979".979".719".665" 33 Series LED 3/4" Sealed 1 Diode EPDM grommet Nylon flange 18 gauge wire P2 designed at 14 volts,.05 amp PC lamp designed at 13.5 volts,.14 amp Mounting: Page 228 P2 Rated Lamps 33250R Red 33250Y Yellow PC Rated Lamps 33275R Red 33275Y Yellow 33277Y Yellow, 20" plug 44 corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

4 10 Series LED 2-1/2" Sealed 2-3 Diode Pattern Polycarbonate lens, housing & flange PVC grommet Designed at 14v,.03 amp (red) and.08 amp (yellow) 10050R/Y grommet kits: R/Y lamp grommet plug 10051R/Y gray flange kits: R/Y lamp & flange plug Mounting: Pages flange gasket LED 2-1/2" Round 4-13 Diode Pattern Light Emitting Diodes (LED) Designed at 13.5v,.110 amp Mounting: Pages Permanently affixed LED flange mount version Wide groove grommet LED Grommet Kits 10050R Red 10050R1 Red 10050Y Yellow 10050Y1 Yellow LED Gray Flange Kits 10051R Red 10051R1 Red 10051Y Yellow 10051Y1 Yellow 1052A A SEE PAGE 1 High impact polycarbonate lens Fit N Forget plug assembly keeps corrosives from lamp Standard lamp has 2 diodes Omni-Volt lamp has 3 diodes Less current draw, resulting in increased battery & alternator life while allowing more power for other vehicle requirements Electronics completely sealed in epoxy to resist corrosion & moisture LED Lamp 10250R Red 10256R Red, 10-30v 10250Y Yellow 10256Y Yellow, 10-30v LED Lamp & Gray Flange 10251R Red 10251Y Yellow LED Lamp & Gray Flange w/abs logo (ABS system compatible) 10271Y Yellow NEW 1051A Popular on owner/operator & show trucks Standard PL-10 connection Encapsulated electronics prevent damage from moisture & corrosion Reflectorized lamp has 4 diode pattern 1050 Red 1050A Yellow 1051 Red w/clear lens New 1051A Yellow w/clear lens New 1052 Red w/reflectorized lens New 1052A Yellow w/reflectorized lens New 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

5 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M Wide groove grommet Fit N Forget plug keeps corrosives from LED lamp Permanently affixed LED flange mount Standard connection Choose from Fit N Forget or standard connections Highest quality LED lighting products on the market from a brand you can trust Most advanced & cost effective 2-1/2" clearance & marker lamp SAE PC rated for combination clearance/marker applications Flange gasket available for additional protection Electronics completely sealed in epoxy to resist corrosion & moisture LED Grommet Kits 10085R Red 10085R1 Red 10085Y Yellow 10085Y1 Yellow LED Gray Flange Kits 10090R Red 10090R1 Red 10090Y Yellow 10090Y1 Yellow LED Grommet Kits 10075R Red 10075Y Yellow LED Gray Flange Kits 10079R Red 10079Y Yellow LED Lamp & Gray Flange 10379R Red 10379Y Yellow LED Lamps & Gray Flange 10279R Red 10279Y Yellow 10 Series PC Rated High Profile LED 2-1/2" Sealed 8 Diode Pattern Polycarbonate lens, housing & flange PVC grommet Designed at 14v,.1 amp 10075R/Y grommet kits: R/Y lamp grommet plug 10079R/Y gray flange kits: R/Y lamp & flange plug 10085R/Y grommet kits: R/Y lamp grommet Fit N Foget plug 10090R/Y gray flange kits: R/Y lamp & flange Fit N Foget plug Mounting: Pages flange gasket LED Lamps 10375R Red 10375Y Yellow LED Lamps 10275R Red 10275Y Yellow 46 corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

6 10 Series PC Rated Low Profile LED 2-1/2" Sealed 8 Diode Pattern Polycarbonate lens, housing & flange PVC grommet Designed at 14v,.1 amp 10076R/Y grommet kits: R/Y lamp grommet Fit N Forget plug 10091R/Y flange kits: R/Y lamp & flange Fit N Forget plug 10086R/Y grommet kits: R/Y lamp grommet plug 10088R/Y black flange kits: R/Y lamp & flange plug 10089R/Y gray flange kits: R/Y lamp & flange plug flange gasket GROMMET KIT FLANGE KIT LED Grommet Kits 10076R Red 10076R1 Red 10076Y Yellow 10076Y1 Yellow LED Gray Flange Kits 10091R Red 10091Y Yellow LED Black Flange Kits 10092R Red 10092Y Yellow LED Grommet Kits 10086R Red 10086Y Yellow LED Gray Flange Kits 10089R Red 10089Y Yellow Permanently affixed LED flange mount version Standard plug High impact polycarbonate lens Fit N Forget plug assembly keeps corrosives from lamp Mounting grommet U.S. patent # Less current draw, resulting in increased battery & alternator life while allowing more power for other vehicle requirements Unique lens optics allows low profile lamp design SAE PC rated for combination clearance/ marker applications LED Lamp & Gray Flange 10389R Red 10389Y Yellow LED Lamp & Black Flange 10391R Red 10391Y Yellow LED Lamp & Black Flange 10288R Red 10288Y Yellow LED Lamp & Gray Flange 10289R Red 10289Y Yellow LED Lamps 10385R 10385Y LED Lamps 10286R 10286Y Red Yellow Red Yellow 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

7 M A R K E R / C L E A R A N C E C/M PAGES Unique shock-mount extends bulb life 15,000 hour rated bulb life Sealed polycarbonate lens & housing Meets PC requirements on a 45 angle using all mounting devices Grommet Kits 10028R Red 10028R1 Red 10028Y Yellow 10028Y1 Yellow Super 10 Lamps 10208R Red 10208Y Yellow Super /2" Sealed PVC grommet 15,000 hr. rated bulb life Designed at 14v,.33 amp, 2 cp 10028R/Y grommet kits: R/Y lamp grommet plug Mounting: Pages ABS Super 10 Lamps 10212Y Yellow, horizontal 10213Y Yellow, vertical 2009 FULL LINE PRODUCT CATALOG PAGES Y shown Standard Grommet Kits 10519R Red 10519R1 Red 10519Y Yellow 10519Y1 Yellow Reflectorized Grommet Kits 10525R Red 10525R1 Red 10525Y Yellow 10525Y1 Yellow 10202R or 10204R shown 2.54 Lens & housing are sonically sealed High impact polycarbonate construction Meets PC requirements on a 45 angle in mounting devices #10708, #10720, #00803 or # volt 15,000 hour rated bulb life Replaces Signal-Stat 1010 & 1011 series Recommended mounting options shown on pages , plugs shown on pages Standard 12v Lamps 10202R Red 10202R1 Red 10202Y Yellow 10202Y1 Yellow 10202B Blue 10202G Green Standard 24v Lamps 10204R Red 10204Y Yellow Series 2-1/2" Sealed PVC grommet 15,000 hr. rated 12v bulb life 12v designed at 14v,.33 amp, 2 cp 10519R/Y grommet kits: R/Y lamp grommet plug 10525R/Y reflector kits: R/Y lamp grommet plug.70 Reflectorized Lamps 10205R Red 10205R1 Red 10205Y Yellow 10205Y1 Yellow 48 corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

8 30 Series LED 2" Sealed 2 or 3 Diode Pattern Polycarbonate lens, housing & flange PVC grommet Designed at.05 amp 30050R/Y grommet kits: R/Y 12v lamp grommet plug 30051R/Y flange kits: R/Y 12v lamp & flange plug 30055R/Y grommet kits: R/Y 10-30v lamp grommet plug Mounting: Pages Series Low Profile LED 2" Sealed 2 Diode Pattern Polycarbonate lens, housing & flange PVC grommet Designed at.05 amp 30070R/Y grommet kits: R/Y lamp grommet Fit N Forget plug 30071R/Y flange kits: R/Y lamp & flange Fit N Forget plug Mounting: Pages Most advanced & cost effective 2" clearance & marker lamp OmniVolt universal lighting products address increasing vehicle power demands by operating equally in electrical systems that range from 10 to 30 volts yyy yyyyyyyyy yyyyyyyyyyyy yyyyyyyyyyyyy yyyyyyyyyyyyyyy yyyyyyyyyyyyyyy yyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyy yyyyyyyyyyyyyy yyyyyyyyyyyyy yyyyyyyyyyy yyyyyyyy yy yyyyy yyyyyyyyyy yyyyyyyyyyyyy yyyyyyyyyyyyy yyyyyyyyyyyyyyy yyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyyy yyyyyyyyyyyyyyyyy yyyyyyyyyyyyyyy yyyyyyyyyyyyyy yyyyyyyyyyyyy yyyyyyyyyyy yyyyyyy LED Grommet Kits 30050R Red, 12v 30050R1 Red, 12v 30055R Red, 10-30v 30050Y Yellow, 12v 30050Y1 Yellow, 12v 30055Y Yellow, 10-30v LED Gray Flange Kits 30051R Red, 12v 30051R1 Red, 12v 30051Y Yellow, 12v 30051Y1 Yellow, 12v Low profile design reduces damage resulting from tree limbs & extruded dock seals Not recommended for PC applications High impact polycarbonate construction Epoxy encapsulated electronics prevent damage from moisture & corrosion Low current draw Extremely resistant to shock & vibration y y y y y y y y y y y y y y y y y y y y y LED Grommet Kits 30070R Red 30070Y Yellow LED Gray Flange Kits 30071R Red 30071Y Yellow SEE PAGE 1 LED Lamp 30250R 30250Y Red, 12v Yellow, 12v 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support LED Lamp 30270R 30270Y LED Lamp & Gray Flange 30251R Red, 12v 30251Y Yellow, 12v LED Lamp & Flange w/abs logo (ABS system compatible) 30271Y Yellow, 12v Red Yellow LED Lamp & Gray Flange 30272R Red 30272Y Yellow 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M 49

9 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M Fit N Forget connection GROMMET KIT FLANGE KIT Mounting grommet Standard bullet terminal plug LED Grommet Kits 30085R Red 30085R1 Red 30085Y Yellow 30085Y1 Yellow LED Gray Flange Kits 30090R Red 30090R1 Red 30090Y Yellow 30090Y1 Yellow LED Grommet Kits 30075R Red 30075Y Yellow LED Gray Flange Kits 30080R Red 30080Y Yellow 1.70 Standard connection LEDs have no filament, therefore are not susceptible to shock & vibration Less current draw, resulting in increased battery & alternator life while allowing more power for other vehicle requirements SAE PC rated for combination clearance/marker applications GROMMET KIT LED Lamp & Gray Flange 30379R Red 30379Y Yellow LED Lamp w/abs logo (ABS system compatible) 30281Y Yellow w/abs logo 30 Series High Profile PC Rated LED 2" Sealed 8 Diode Pattern Polycarbonate lens, housing & flange PVC grommet Designed at 14v,.1 amp 30075R/Y grommet kits: R/Y lamp grommet plug 30080R/Y gray flange kits: R/Y lamp & flange plug 30085R/Y grommet kits: R/Y lamp grommet Fit N Forget plug 30090R/Y gray flange kits: R/Y lamp & flange Fit N Forget plug Mounting: Pages LED Lamps 30375R 30375Y Red Yellow LED Lamp w/abs logo (ABS system compatible) 30282Y Yellow w/abs logo 2.92 LED Lamp & Gray Flange LED Lamp 30279R Red 30275R Red 30279Y Yellow 30275Y Yellow LED Lamp w/abs logo LED Lamp w/abs logo (ABS system compatible) (ABS system compatible) 30269Y Yellow 30264Y Yellow 1.50 w/abs logo w/abs logo 50 FLANGE KIT corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

10 30 Series Low Profile PC Rated LED 2" Sealed 6 Diode Pattern Permanently affixed LED flange mount Polycarbonate lens, housing & flange PVC grommet Designed at 14v,.12 amp 30086R/Y grommet kits: R/Y lamp grommet Fit N Forget plug 30091R/Y gray flange kits: R/Y lamp & flange Fit N Forget plug Mounting: Pages U.S. patent # LED Grommet Kits 30086R Red 30086R1 Red 30086Y Yellow 30086Y1 Yellow LED Gray Flange Kits 30091R Red 30091Y Yellow Standard bullet terminal plug Wide groove grommet LEDs have no filament, therefore are not susceptible to shock & vibration Less current draw, resulting in increased battery & alternator life while allowing more power for other vehicle requirements SAE PC rated for combination clearance/marker applications 2.25 LED Lamp 2.25 LED Lamp 30385R Red 30285R 30385Y Yellow 30285Y LED Lamp & Gray Flange 30386R Red 30386Y Yellow Fit N Forget connection Red Yellow LED Lamp & Black Flange 30288R Red 30288Y Yellow LED Lamp & Gray Flange 30289R Red 30289Y Yellow 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

11 C/M M A R K E R / C L E A R A N C E 3050 Unique combination of colored LEDs with clear lens draws attention to lamp only when lit Electronics completely sealed in epoxy to resist corrosion & moisture Standard connection Lower power draw, allowing more power for other vehicle requirements Not suitable for PC requirements 3050 Red 3050A Yellow 3051 Red w/clear lens New 3051A Yellow w/clear lens New 3050A A LED 2" Round 10 Diode Pattern Light Emitting Diodes (LED) Designed at 13.5v,.050 amp Mounting: Pages FULL LINE PRODUCT CATALOG 52 PAGES Wabash & Monon replacement ABS version complies with FMVSS 108 requirement for ABS malfunction indicator lamp on trailer & ABS braking systems 12 volt 15,000 hour rated bulb life Lamp designed for PC requirements on a 45 angle in mounting devices #30720, #00801, #00803, #00804 or surface mount flange Replaces Signal-Stat 1030 series Grommet Kits 30503R Red, kit 30503R1 Red, kit 30503Y Yellow, kit 30503Y1 Yellow, kit v Lamps 30200R 30200R Y 30200Y B 30200G 24v Lamps 30206R 30206Y 30206B 30206G Red Red Yellow Yellow Blue Green Red Yellow Blue Green 30 Series Products 2" Sealed PVC grommet 15,000 hr rated 12v bulb life 12v designed at 14v,.33 amp, 2 cp 24v designed at 28v,.17 amp, 3 cp 30503R/Y lamp kits: R/Y lamp grommet plug Mounting: Pages v Lamp w/abs logo 30257Y Yellow, vertical 30230Y Yellow, horizontal corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

12 30 Series PC Rated Products 2" Sealed 15,000 hr rated 12v bulb life 12V designed at 14v,.33 amp, 2 cp Mounting: Pages Side Marker & Clearance LED Sealed 6 Diode Pattern 18 gauge wire Designed at 12.8v,.05 amp 3.0" 3 X dia " Series Flange Products 2" Sealed Polycarbonate lens & flange 15,000 hr rated 12v bulb life Designed at 14v,.33 amp, 2 cp flange gasket SURFACE MOUNT BOLT HOLE CIRCLE 4.0" 1.01 Innovative design allows one lamp the ability to function as two 12 volt 15,000 hour rated bulb Lamp designed for PC requirement on a 45 angle in grommet mounting devices #30700, #30702, #30704, #30706 & # R Red 30223R Red, lamp & flange 30204Y Yellow 30223Y Yellow, lamp & flange 2.04 Flanges are per manently affixed to lamp 12 volt 15,000 hour rated bulb Flush mount is not suitable for PC requirements 30221R 30222R 30221Y 30222Y.88" Red, flush mount Red, surface mount Yellow, flush mount Yellow, surface mount.830 FLUSH MOUNT.195 SCREW HOLE DIAMETER Y shown Full pattern light output Popular on show truck applications Designed for areas with limited space Not suitable for PC requirements Hard-wired design eliminates pin corrosion 3550 Red 3550A Yellow 30204R shown PAGES PAGES R shown 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M 53

13 C/M M A R K E R / C L E A R A N C E 35200Y 35200R 35201R 35201Y 35 Series LED Sealed 2 Diode Pattern Polycarbonate or acrylic lens & housing Designed at.05 amp armored mount sealing gasket mounting gasket Unique combination of colored LEDs with clear lens draws attention to lamp only when lit Slim 3/4" wide design makes lamp perfect solution for narrow rail designs Must be mounted horizontally Optional gaskets to improve seal between lamp & body Not suitable for PC requirements LED Kits* 35001R Red, 12v 35001R1 Red, 12v 35080R Red, 12v 35001Y Yellow, 12v 35001Y1 Yellow, 12v 35080Y Yellow, 12v *Kits include lamp & plug LED Lamps 35200R 35201R 35880R 35200Y 35201Y 35880Y Red, 12v Clear lamp, red diode, 12v New Red, 12v Yellow, 12v Clear lamp, yellow diode, 12v New Yellow, 12v 2009 FULL LINE PRODUCT CATALOG 54 Slim 3/4" wide design makes lamp perfect solution for narrow rail designs SAE PC rated for combination clearance/marker applications Must be mounted horizontally 35375R Red 35375Y Yellow 35075R Red, kit New 35075Y Yellow, kit New Series Combo PC Rated LED Sealed 5 Diode Pattern Designed at 13.5v,.12 amp 35075R/Y kits: R/Y lamp plug w/.180 molded bullet armored mount sealing gasket mounting gasket corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

14 15 Series LED Sealed 1-3 Diode Pattern Designed at 14v,.05 amp Mounting: Pages LED Sealed 2-3 Diode Pattern Designed at 13.5v,.050 amp Mounting: Pages Series Marker 1560 & Clearance Rectangular Sealed 15,000 hr. rated 12v bulb life 12v designed at 14v,.33 amp, 2 cp 24v designed at 28v,.17 amp, 3 cp Mounting: Pages Designed to fit applications requiring minimal space Less susceptible to shock & vibration Uses standard mounting holes & accessories Not suitable for PC applications Draws less current, allowing more power for other vehicle requirements Direct pin-to-circuit board solders assure vibration resistant contacts 1 diode (red), 3 diode (yellow) LED pattern 15250R 15250Y Red Yellow Popular on owner/operator & show trucks Standard PL-10 connection 2 diode (red), 3 diode (yellow) LED pattern Encapsulated electronics prevent damage from moisture & corrosion Not suitable for PC requirements 1560 Red 1560A Yellow 1561 Red w/clear lens New 1561A Yellow w/clear lens New Fits in most narrow header rails Mount vertically or horizontally Snap-lock tabs allow quick & easy installation Suitable for PC requirements on a 45 angle Blue, green & clear versions available upon request 15200R 15200R R 15200Y 15200Y Y 15203Y 1561A 1561 Red, 12v Red, 12v Red, 24v Yellow, 12v Yellow, 12v Yellow, 24v Yellow, 12v w/abs logo A SEE ABOVE 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

15 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M shown 15033Y shown Stylish design for contemporary look Sure contact, self-grounding feature Submersible for marine use 3 year warranty on LED chrome mount kits 15033R Red, LED chrome mount kit 15033R1 Red, LED chrome mount kit 15033Y Yellow, LED chrome mount kit 15033Y1 Yellow, LED chrome mount kit 15506R Red, chrome mount kit 15506R1 Red, chrome mount kit 15506Y Yellow, chrome mount kit 15506Y1 Yellow, chrome mount kit 15507R Red, black mount kit 15507Y Yellow black mount kit Designed for use on most utility trailer fenders Wire cover is marked in 1/2" increments for easy length modifications 3 year warranty on LED chrome mount kits LH kit w/led lamps RH kit w/led lamps LH kit RH kit Extra strength plastic construction Features top cut out area on mount #15727 for narrow rail design Easy snap-in lamp installation Suitable for PC requirements with incandescent lamps Replaces Signal-Stat R Red, kit w/cut mount 15006Y Yellow, kit w/cut mount 15008R Red, kit 15008Y Yellow, kit Adapter Mounts For 15 Series Products ABS mount 15033R/Y kits: R/Y LED lamp chrome mount hot wire grommet 15506R/Y kits: R/Y lamp chrome mount hot wire 15507R/Y kits: R/Y lamp black mount hot wire Dual Face Bracket For 15 Series Products ABS mount & kits: R/Y LED lamps ea bracket plug & kits: R/Y LED lamps ea bracket plug Rail Mounts For 15 Series Products ABS mount 15006R/Y kits: R/Y lamp mount side entry plug 15008R/Y kits: R/Y lamp mount side entry plug 56 corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

16 19 Series PC Rated LED Sealed 2-6 Diode Pattern Designed at 14v,.05 amp PC rated lamp designed at 14v,.05 amp (red),.12 amp (yellow) Mounting: Page Innovative optic design allows combination lamps to function as two Draws less current, allowing more power for other vehicle requirements Designed to fit applications requiring minimal space Must be mounted horizontally PC rated lamps meets requirements when mounted on a 45 angle Standard red lamps have 2 diode pattern PC rated red lamps & standard yellow lamps have 4 diode pattern PC rated yellow lamps have 6 diode pattern LED Lamp w/standard connection 19250R Red 19250Y Yellow 19251R Red w/clear lens 19251Y Yellow w/clear lens LED Lamp w/fit N Forget connection 19350R Red 19350Y Yellow LED PC Rated Lamp w/standard connection 19275R Red 19275Y Yellow LED PC Rated Lamp w/fit N Forget connection 19375R Red 19375Y Yellow C/M 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

17 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M PAGES A 1961 Popular in owner/operator & show trucks Standard connection 4 diode LED pattern Encapsulated electronics Not recommended for PC applications 1960 Red 1960A Yellow 1961 Red w/clear lens New 1961A Yellow w/clear lens New Designed to fit in limited mounting areas Fits in most narrow header rails Can be mounted vertically or horizontally Snap-lock tabs allow quick & easy installation Suitable for PC requirements on 45 angle when using base mounts on page 238 Replaces Signal-Stat 1900 series 19200R 19200R Y 19200Y Y Red Red Yellow Yellow Yellow, w/abs logo A LED Sealed 4 Diode Pattern Light Emitting diodes (LEDs) Designed at 13.5v,.050 amp Mounting: Page Series Products Rectangular Sealed Two 12v bulbs designed at 14v,.33 amp, 2 cp Mounting: Page corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

18 Base Mount Kits For LED 19 Series Products Polycarbonate or chrome ABS mount Kit components: 19006R/Y, 19020R/Y or 19002R/Y kits: R/Y 19275R/Y or 19200R/Y lamp gray mount w/hot wire 19031R/Y or 19036R/Y kits: R/Y or 19375R/Y LED lamp chrome mount plug 19032R/Y or 19037R/Y kits: R/Y or 19375R/Y LED lamp black mount plug 19009R/Y kit: R/Y lamp chrome mount & hot wire 19016R/Y kit: R/Y lamp black mount LED Lamp & Gray Mount Kit 19006R Red 19006R1 Red 19006Y Yellow 19006Y1 Yellow LED PC Rated Lamp & Gray Mount Kit 19020R Red 19020Y Yellow Incandescent Lamp & Gray Mount Kit 19002R Red 19002R1 Red 19002Y Yellow 19002Y1 Yellow Stylish chrome base mount Fit N Forget plug assembly keeps corrosives away from LED lamps Popular in trailer & body applications Features unique plug-in design for ease of installation Must be mounted horizontally Low profile extra strength base Meets PC requirements on 45 angle LED & incandescent kits available LED Lamp & Chrome Mount Kit 19031R Red 19031R1 Red 19031Y Yellow 19031Y1 Yellow LED PC Rated Lamp & Chrome Mount Kit 19036R Red 19036R1 Red 19036Y Yellow 19036Y1 Yellow Incandescent Lamp & Chrome Mount Kit 19009R Red 19009R1 Red 19009Y Yellow 19009Y1 Yellow High impact polycarbonate lens & housing Hot wire for quick installation LED Lamp & Black Mount Kit 19032R Red 19032Y Yellow LED PC Rated Lamp & Black Mount Kit 19037R Red 19037Y Yellow Incandescent Lamp & Black Mount Kit 19016R Red 19016Y Yellow Replaces Chrysler # (red) & # (yellow) 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

19 C/M M A R K E R / C L E A R A N C E Innovative optic design allows one PC rated lamp the ability to function as two Draws less current, allowing more power for other vehicle requirements Uses standard mounting holes & accessories Standard lamps have 3 diode pattern PC rated lamps have 8 diode pattern LED PC Rated Kits 21075R Red, 12v 21075R1 Red, 12v 21075Y Yellow, 12v 21075Y1 Yellow, 12v LED PC Rated Lamps 21275R Red, 12v 21275Y Yellow, 12v 21 Series Marker & Clearance PC Rated LED Sealed 3-8 Diode Pattern Polycarbonate or acrylic lens & housing 12v designed at 14v,.10 amp 24v designed at 28v,.05 amp 21075R/Y kits: R/Y lamp plug 21051R/Y & 21080R/Y kits: R/Y or 21880R/Y lamp plug 21056R/Y kits: R/Y lamp plug mounting gasket sealing gasket LED Kits w/reflex 21051R Red, 12v 21051R1 Red, 12v 21080R Red, 12v 21056R Red, 24v 21051Y Yellow, 12v 21051Y1 Yellow, 12v 21080Y Yellow, 12v 21056Y Yellow, 24v LED Lamps w/reflex 21251R Red, 12v 21880R Red, 12v 21256R Red, 24v 21251Y Yellow, 12v 21880Y Yellow, 12v 21256Y Yellow, 24v Hard-wired LED Lamps w/reflex 21252R Red, w/2" wire 21253R Red 21253Y Yellow 2009 FULL LINE PRODUCT CATALOG A Reflectorized lens on colored lens version Popular in owner operator & show trucks Optional gaskets to improve seal between lamp & body Acrylic lens & housing 8 diode pattern Less susceptible to shock & vibration Red 2150A Yellow 2152 Red w/clear non-reflectorized lens New 2152 A Yellow w/clear non-reflectorized lens New 2150A LED Sealed 8 Diode Pattern Acrylic lens & housing Designed at 13.5v,.12 amp mounting gasket sealing gasket corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc. 2.0" 6.0"

20 Super 21 Rectangular Sealed Acrylic lens ABS housing 12v designed at 14v,.33 amp, 2 cp 24v designed at 28v,.17 amp, 3 cp 21001R/Y or 21005R/Y kits: R/Y or 21205R/Y 24v lamp hot wire 21002R/Y kits: R/Y 12v lamp w/reflector hot wire 21506R/Y kits: R/Y 12v lamp 1 self piercing plug 21507R/Y kits: R/Y 12v lamp w/reflector 1 self piercing plug 21501R/Y kits: R/Y 12v lamp w/reflector extension bracket plug plug mounting gasket sealing gasket Lamp Kits 21001R Red 21001R1 Red 21001Y Yellow 21001Y1 Yellow 21005R Red, 24v 21005Y Yellow, 24v Reflectorized Kits 21002R Red 21002R1 Red 21002Y Yellow 21002Y1 Yellow 12v Lamps w/self Piercing Plug 21506R - Red 21507R - Red reflectorized 21506Y - Yellow 21507Y - Yellow reflectorized R Available with standard or reflectorized lens Suitable for PC requirements on a 45 angle with additional reflectors Version available for ABS requirements Optional gaskets available to improve seal between lamp & body Kits with extension brackets are a direct replacement for Utility Trailer # / Lamp 21200R Red, 12v 21205R Red, 24v 21200Y Yellow, 12v 21205Y Yellow, 24v Reflectorized Lamp 21201R Red, 12v 21201Y Yellow, 12v ABS Lamp 21210Y - Yellow, 12v PAGE dia Y Kits w/extension Bracket 21501R Red 21501Y Yellow Extension Bracket White Black Black, angle C/M 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

21 C/M M A R K E R / C L E A R A N C E Popular replacement on Freightliner vehicles where lamp is not mounted on a curved location Electronics completely sealed in epoxy to resist corrosion & moisture Less susceptible to shock & vibration LED lamps offer superior brightness & faster start-time than incandescent versions Recommend replacing the incandescent lamp & existing harness 21090Y Yellow w/59" harness, 3 wire, sealed connector, Freightliner #A Y Yellow w/39" harness, 3 wire, non-sealed connector, Freightliner #A Y Yellow w/12" harness, 3 wire, non-sealed connector, Freightliner #A Y Yellow w/12" harness, 3 wire, sealed connector, Freightliner #A & A Y Yellow w/39" harness, 3 wire, sealed connector, Freightliner #A Y Yellow w/39" harness, 3 wire, non-sealed connector, Freightliner #A Y Yellow, kit 21 Series Marker & Auxiliary Turn LED Rectangular Sealed 16 Diode Pattern Light Emitting diodes (LEDs) Designed at 14v,.15 amp (side turn),.02 amp (marker) 21096Y kit: Y LED side turn/marker lamp mounting gasket hardware bag 1 - Replacement harness mounting gasket sealing gasket Y shown FULL LINE PRODUCT CATALOG Available with standard or reflectorized lens Features male pin connections Suitable for PC requirements on a 45 angle with additional reflectors 29202R 29202Y 29203R 29203Y 29002R 29002Y 29003R 29003Y Red, PC rated Yellow, PC rated Red w/reflex Yellow w/reflex Red, PC rated, kit Yellow, PC rated, kit Red, kit Yellow, kit Male Pin 21 Rectangular Sealed Designed at 12v,.33 amp, 2cp 29002R/Y kit: R/Y lamp plug 29003R/Y kit: R/Y lamp plug right angle plug corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

22 18 Series LED Sealed 3 Diode Pattern Acrylic lens & housing 18 gauge wire 12v designed at 13.5v,.05 amp 10-30v designed at 13.5v & 28v,.05 amp DIA. MOUNTING HOLE 18 Series Acrylic lens ABS housing Rubber mounting gasket 18 gauge wire Bulb: #194 wedge base 18300R/Y kits: R/Y lens/housing plug mounting gasket 99012R red, lens/housing 99012Y yellow, lens/housing mounting gasket plug LED Lamp w/blunt Cut 18050R Red 18050Y Yellow 18011R Red, 10-30v 18011Y Yellow, 10-30v 18011C Clear, 12-30v Note: Recommended for side marker & reflector use with no roll back mounted vertically or horizontally Sonically welded lens & housing Replaceable bulb Not suitable for PC requirements Replaces Signal-Stat 1572/1572A 18300R Red, kit 18300R1 Red, kit 18300Y Yellow, kit 18300Y1 Yellow, kit R/Y shown REQUIRES A DIAMETER HOLE FOR SOCKET.200 SCREW HOLE DIAMETER SEE PAGE 1 Hard wired design Uses standard mounting holes & accessories Draws less current, allowing more power for other vehicle requirements OmniVolt versions also meet ECE standards Not suitable for PC requirements OmniVolt versions address increasing vehicle power demands by operating equally in electrical systems ranging from 10 to 30 volts Meets SAE J592e standards Meets SAE J594f when mounted with no rollout or rollback DIA. MOUNTING HOLE Note: Recommended for horizontal applications requiring 0-20 roll back (yellow) or 0-35 roll back (red) LED Lamp w/packard # (male) 18070R Red 18070Y Yellow LED Lamp w/packard # (female) 18060R Red 18060Y Yellow LED Lamp w/blunt Cut 18090R Red 18090Y Yellow 18300R shown 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support DIA. MOUNTING HOLE Note: Recommended for horizontal applications requiring 0-20 roll back (yellow) or 0-35 roll back (red) SEE ABOVE 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M 63

23 C/M M A R K E R / C L E A R A N C E dia. mounting hole Unique dome lens design Popular in trailer & body applications Hard wired design with molded.180 bullet ends Innovative optics design allows for horizontal mounting Highest quality LED lighting products on the market from a brand you can trust LEDs have no filament, therefore are not susceptible to shock & vibration Not suitable for PC requirements 26270R Red 26270Y Yellow 26 Series Dome Lens & Surface Mount 3 Diode Pattern Designed at 14v,.05 amp Mounting: Page FULL LINE PRODUCT CATALOG dia. mounting hole A 2660 Popular in trailer & body applications Hard wired design with blunt cut or molded bullet ends Innovative optics design allows for horizontal or vertical mounting Not suitable for PC requirements 26250R Red w/.180 molded bullet 26251R Red, blunt cut 26251R1 Red, blunt cut 26250Y Yellow w/.180 molded bullet 26251Y Yellow, blunt cut 26251Y1 Yellow, blunt cut A Hard-wired design eliminates pin corrosion Encapsulated electronics 16 diode double bullseye LED pattern 2660 Red 2660A Yellow 2661 Red w/clear lens New 2661A Yellow w/clear lens New 26 Series LED Sealed 3 Diode Pattern Designed at 14v,.05 amp Mounting: Page lamp gasket LED 2" x 4" Rectangular 16 Diode Pattern Designed at 13.5v,.080 amp 99238R Red, lens 99238Y Yellow, lens 99238C clear lens Mounting: Page corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

24 Shock/Mount Two Bulb Die Cast Acrylic lens Die cast housing Bulbs: Two # red lens & O-ring 9006A yellow lens & O-ring 9180 O-ring 9523 mounting pad Mounting: Page 239 Shock/Mount Two Bulb Die cast base with heavy mounting pad Shock/Mount for maximum bulb life Rubber O-ring secures snap-on lens Two bulb design if one burns out, the other remains lighted Lamp meets requirements with only one bulb Not suitable for PC requirements Replaces Truck-Lite series 1203 Red 1203A Yellow 1203G Green SCREW HOLE DIAMETER Acrylic lens Permastat housing Bulbs: Two # red lens 9007A yellow lens 9007B blue lens 1211 Red 9007G green lens 1211D Red 9007W clear lens 1211A Yellow 9523 mounting pad 1211AD Yellow 1211W Clear (Utility light) Mounting: Page Red, shock/mount Shock/Mount Extended Lens High impact Permastat housing protects against rust & corrosion Shock/Mount (1213 model) for maximum bulb life Two bulb design if one burns out, the other remains lighted Snap-on lens makes bulb and lens replacement easy Lamp meets requirements with only one bulb Not suitable for PC requirements Replaces Truck-Lite series 1213A Yellow, shock/mount Polycarbonate lens for total protection against tree branches External mounting holes save installation time Two bulb design if one burns out, the other remains lighted 1233 Red, polycarbonate 1233A Yellow, polycarbonate Bulbs: Two # red lens 9077A yellow lens 9180 O-ring 9523 mounting pad PAGE 64 PAGE A & 9179 shown A shown 15,000 hour bulbs SCREW HOLE DIAMETER FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

25 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M Innovative lamp design allows one lamp the ability to function as two Lamp is designed to comply with SAE J2042 requirements when mounted both horizontally & vertically PAGE 64 Chassis Ground Lamp w/cone Wire Grommet 26901R Red 26901Y Yellow External Ground Lamp w/flat Wire Grommet 26902R Red 26902Y Yellow 26 Series PC Rated Polycarbonate lens ABS housing 180 molded bullet terminals Designed at 12v,.50 amp 99027R red lens 99027Y yellow lens Newly designed wire grommet provides improved water resistance between the lamp & wiring 26901R/Y version offers coned wiring grommet, offering complete seal between body & lamp 1259A 15,000 hour bulbs 1264 shown PAGE 64 High impact acrylic housing protects against rust & scorrosion Snap-on lens permits easy bulb & lens replacement Two bulb design if one burns out, the other remains lighted Not suitable for PC requirements Optional mounting gasket available to improve seal between lamp & body Replaces Truck-Lite series 1259 Red 1259D Red 1259A Yellow 1259AD Yellow 1259B Blue Not suitable for PC requirements For use on flat & lowboy trailers, recreational vehicles & boat trailers High impact acrylic housing protects against rust & corrosion Serves as a legal reflector when mounted between 15" & 60'' from ground level on trailers less then 80'' wide Two bulb design if one burns out, the other remains lighted Replaces Truck-Lite series 1264 Red 1264D Red 1264A Yellow 1264AD Yellow Shock/Mount Two Bulb Acrylic lens ABS housing Bulbs: Two # red lens 9093A yellow lens 9093B blue lens 9093G green lens 9093W clear lens 9522 mounting pad Reflex Two Bulb Acrylic lens ABS housing Bulbs: Two # red lens 8933A yellow lens 9522 mounting pad corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

26 Reflex Two Bulb Acrylic lens ABS housing Bulbs: Two # red lens 9057A yellow lens 1.12" 2.00" 4.00".218 SCREW HOLE DIAMETER Clearance Marker PC Rated LED Sealed 14 Diode Pattern 3.00" Designed at 12.8v,.12 amp 3.0" 3.88".38" 1.0" 26 Series Armored Acrylic lens Zinc-plated steel housing Bulbs: # red lens 8930A yellow lens " For use on flat & lowboy trailers, recreational vehicles & boat trailers High impact polycarbonate housing protects against rust & corrosion SAE Class A reflex reflector snap-on lens Serves as a legal reflector when mounted between 15 & 60 inches from ground level on trailers less than 80'' wide Two bulb design if one burns out, the other remains lighted 1222 Red 1222A Yellow PAGE shown 15,000 hour bulbs Popular in owner-operator & show truck applications Hard-wired design eliminates pin corrosion SAE PC rated for combination clearance/marker applications 2674 Red 2674A Yellow Features zinc-plated steel housing Designed for surface mounting Not suitable for PC requirements 26315R Red 26315Y Yellow 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M SCREW HOLE DIAMETER 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

27 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M Features snap-in lens Rubber housing provides additional protection against shock & vibration Not suitable for PC requirements 26310R Red 26310Y Yellow SCREW HOLE DIAMETER Features snap-on lens for quick and easy bulb replacement High impact plastic lens & housing Not suitable for PC requirements 26312R Red 26312Y Yellow Reflex lens design Full pattern light output Popular on show truck & owner-operator applications Hard-wired design eliminates pin corrosion Not suitable for PC applications Kit includes lamp & chrome bezel Popular Peterbilt replacement 2672 Red, kit 2672A Yellow, kit Full pattern light output Popular on show truck & owner-operator applications Hard-wired design eliminates pin corrosion Not suitable for PC applications Kit includes lamp & chrome bezel Popular Peterbilt replacement 2673 Red, kit 2673A Yellow, kit SCREW HOLE DIAMETER 4.0" 6.25" 4.0" 1.88".75" 1.88" 26 Series Acrylic lens Rubber housing Bulbs: Two #194 wedge base 99051R red lens 99051Y yellow lens 26 Series Polycarbonate lens ABS housing Bulbs: Two #194 wedge base 99050R red lens 99050Y yellow lens Clearance Side Marker Kit LED Sealed w/reflex 2 Diode Pattern Acrylic lens & housing Chrome ABS bezel 18 gauge wire Designed at 12.8v,.05 amp Clearance Side Marker Kit LED Sealed 12 Diode Pattern Chrome ABS bezel 18 gauge wire Designed at 12.8v,.05 amp 4.0" 1.88" " 6.25".75".75" corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

28 Rubber Body Mount Acrylic lens Rubber housing Bulb: two # red lens 8946A yellow lens 8946W clear lens Pee Wee Polycarbonate lens ABS housing Bulb: # red lens 9342A yellow lens Compact styling is ideal for narrow body channel mounting External mounting holes allow mounting without disassembly Black rubber housing Snap-in lens permits easy bulb & lens replacement Aluminum base provides mounting strength & durability Two stainless steel ground straps ensure electrical connection Two bulb design, if one burns out, the other remains lighted 1506 Red 1506D Red 1506A Yellow 1506AD Yellow 1506W Clear (utility light) High impact polycarbonate construction Mini lamp features external mounting holes Lens snaps & locks into base Mounts without disassembly Replaces Truck-Lite series 1507D Red 1507 Red 1507AD Yellow 1507A Yellow & 1507A shown 15,000 hour bulbs C/M M A R K E R / C L E A R A N C E.188 SCREW HOLE DIAMETER Slimline LED Sealed 6 Diode Pattern 18 gauge wire Designed at 12.8v,.06 amp Slimline 18 gauge wire Bulb: # red lens 9082A yellow lens Upgrade to LED on U-Haul & Stoughton trailers Full pattern light output Surface mount, slim style Not suitable for PC requirements Hard-wired design 2670 Red 2670A Yellow U-Haul and Stoughton Trailer replacement lamp HT suffix versions have.180" bullet terminal Snap-on lens for easy bulb & lens replacement Surface mounted, slim styling Shock/Mount for maximum bulb life Permastat base will not rust Replaces Truck-Lite series 1520D Red 1520 Red 1520HT Red harness terminated 1520AD Yellow 1520A Yellow 1520AHT Yellow harness terminated 1520 shown 15,000 hour bulbs 3.0" 3.50" AHT shown 15,000 hour bulbs ".18" 1.18" SEE ABOVE 2009 FULL LINE PRODUCT CATALOG.220 SCREW HOLE DIAMETER TERMINAL SIZE.180 DIAMETER MALE BULLET 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

29 C/M M A R K E R / C L E A R A N C E SAE PC rated for combination clearance/marker applications Snap-in lamp makes installation fast & easy Lamp gasket #97921 required for proper lamp & bracket fit 12275R Red 12275Y Yellow 12 Series PC Rated LED Rectangular Sealed 6 Diode Pattern Mounting bracket (ABS) Designed at 13.5v,.12 amp gray bracket brown bracket black bracket lamp gasket bracket gasket 2009 FULL LINE PRODUCT CATALOG 70 SEE ABOVE R or 12201R shown Y shown SCREW HOLE DIAMETER Standard replacement for UPS Sonically sealed lens & housing 15,000 rated 12 volt bulb life 12 & 24 volt models SAE PC rated for combination clearance/marker applications Optional mounting gasket to improve seal between lamp & body Replaces Signal-Stat 1111 series 12200R Red, 12v 12201R Red, 24v 12200Y Yellow, 12v 12201Y Yellow, 24v 12200C Clear, 12v High impact plastic branch deflector mount Snap-in lamp design for easy replacement SAE PC rated for combination clearance/marker applications Standard replacement on UPS models 12001R Red, kit w/brown mount & plug 12003R Red, kit w/gray mount & plug 12004R Red, kit w/brown mount 12001Y Yellow, kit w/brown mount & plug 12003Y Yellow, kit w/gray mount & plug 12004Y Yellow, kit w/brown mount 12001C Clear, kit w/brown mount & plug 12003C Clear, kit w/gray mount 12004C Clear, kit w/brown mount 12 Series PC Rated Sealed Foam gaskets 12v designed at 14v,.33 amp, 2 cp 24v designed at 28v,.17 amp, 3 cp gray bracket brown bracket black bracket lamp gasket bracket gasket Deflector Mounts For 12 Series Lamps ABS plastic mounts Foam gaskets 12001R/Y/C kits: R/Y/C lamp plug 12003R/Y/C kits: R/Y/C lamp gray mount plug 12004R/Y/C kits: R/Y/C lamp brown mount corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

30 The Guardian Deflector Mount For 12 Series Lamps Steel or aluminum mount Foam gasket bracket gasket Narrow Rail Deflector Mount PC Rated LED Lens Replaceable 6 Diode Pattern Acrylic lens Gray painted steel housing Designed at 12.8v,.065 amp 9776 red lens 9776A yellow lens 26 Series Lamps Acrylic lens Die cast or ABS housing Bulbs: #168 wedge base 99160R red lens 99160Y yellow lens Aluminum or gray painted steel housing Fully protected lens with high guard Pressure pad tightly seals lens Quick-click lamp removal 1101 Red, steel 1101A Yellow, steel 1105 Red, steel shock/mount 1105A Yellow, steel shock/mount 1105W Clear, steel shock/mount 1102 Red, aluminum 1102A Yellow, aluminum Popular for owner-operators & show trucks Fully protected lens with high guard Snap-in lens for easy replacement SAE PC rated for combination clearance/marker application 2671 Red 2671A Yellow Choose either a rugged die cast or high impact ABS housing Not suitable for PC requirements Replaces Signal-Stat 1113/1114 series 26311R Red, one bulb & die cast 26313R Red, two bulbs & ABS 26313R1 Red, two bulbs & ABS 26311Y Yellow, one bulb & die cast 26313Y Yellow, two bulbs & ABS 26313Y1 Yellow, two bulbs & ABS 26311R shown 1105A shown 4.78" 2.13" 1.38" 3.88" 26313Y shown 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

31 2009 FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M 1550 & 1551A shown 15,000 hour bulbs & 1555A shown shown Shock/Mount for maximum bulb life Polycarbonate housing protects against rust & corrosion Polycarbonate snap-on lens permits easy bulb and lens replacement External mounting holes for quick installation & replacement All electric contacts greased for maximum corrosion protection, two.156" female bullet terminals Surface mount replacement for Fruehauf #LCD-3684 Rail mount replacement for Fruehauf #LCD Red, surface mount 1550A Yellow, surface mount 1551 Red, rail mount 1551A Yellow, rail mount Y shown Ideal for narrow rail or channel mounted applications Can be mounted vertically or horizontally Low profile snap on lens allows for easy bulb replacement Acrylic lens, ABS base SAE PC rated for combination clearance/marker applications 1555 Red 1555A Yellow Popular boat & utility trailer lamp Shock/Mount for maximum bulb life Serves as legal reflector when mounted between 15 & 60 inches from ground level on trailers less than 80" wide 1570 Red 1570A Yellow x.75 stud mount 1.00 Sonically sealed lens & housing Features snap-in lamp with reflector Long-life 15,000 hour 12 volt bulb Grommets flush mount the lamp to vehicle Not suitable for PC requirements Replaces Signal-Stat 1017/1017A & R Red, 12v 14200Y Yellow, 12v /16" R.125 Slimline Bulb: # red lens 9061 red lens & O-ring 9059A yellow lens 9061A yellow lens & O-ring plug 9060 O-ring Slimline Acrylic lens ABS housing Bulb: # red lens 8937A yellow lens Reflectorized Lamp Acrylic lens & housing Bulb: # red lens 8947A yellow lens Model 14 Rectangular Sealed Polycarbonate reflectorized lens & housing PVC grommet 12v designed at.33 amp, 2 cp Recommended Accessories white grommet black grommet GROMMET HOLE SIZE LAMP corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc..700

32 Chrome Plated Lamp LED 2 Diode Pattern Acrylic lens Chrome plated ABS housing 16 gauge 2 wire 9775 red lens 9775A yellow lens Chrome Plated Lamp Acrylic lens ABS housing Bulb: # red lens 9371A yellow lens Starburst Design Acrylic lens ABS housing Bulb: #168 wedge base 8934 red lens 8934A yellow lens 8934W clear lens Beehive Design Acrylic lens & ABS housing Aluminum bracket Bulb: # red lens 9004A yellow lens 9004G green lens 9004W clear lens.75 Popular in show trucks Flush mount design Features 2 Super LEDs for a full pattern Epoxy encapsulated electronics prevent damage from moisture & corrosion Mounting gasket included 2675 Red 2675A Yellow Chrome plated ABS housing Two wires Flush mount 1571 Red 1571D Red 1571A Yellow 1571AD Yellow High-impact Permastat housing protects against rust & corrosion Snap-on lens permits easy bulb & lens replacement Low profile design reduces wind resistance, fits in compact areas Specially treated gasket seals out dirt & moisture Two stainless steel ground straps ensure electrical connection Meets PC requirements Replaces Truck-Lite series 1294 Red 1294D Red 1294A Yellow 1294AD Yellow 1294W Clear (utility light) High-impact Permastat housing protects against rust & corrosion Rigid right angle bracket Snap-on lens allows simple bulb replacement 1001D Red 1001AD Yellow SEE ABOVE SCREW HOLE DIAMETER FULL LINE PRODUCT CATALOG M A R K E R / C L E A R A N C E C/M 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

33 2009 FULL LINE PRODUCT CATALOG C A B M A R K E R C/M 74 SEE ABOVE Popular replacement for cab marker or corner trailer applications Meets SAE 592e standards Standard PL-10 connection Not recommended for use with cam-on 1075A A " 2.5" mounts or PC applications 1075 Red 1075A Yellow Beehive lens designed for cab marker use Lens & housing are sonically sealed High impact polycarbonate construction Suitable for PC requirements on a 45 angle in mounting devices #10708, #10720, #00801, #00803 or # R Red 10203Y Yellow 10203B Blue 10203G Green 1076 Red w/clear lens New 1076A Yellow w/clear lens New Popular replacement for cab marker or corner trailer applications Meets SAE 592e standards Less current draw, resulting in increased battery & alternator life LEDs have no filament, therefore are not susceptible to shock & vibration Not recommended for use with cam-on mounts 10276R Red 10276Y Yellow 10276Y1 Yellow Popular replacement for cab marker or corner trailer applications Meets SAE 592e standards Less current draw, resulting in increased battery & alternator life 30276R Red 30276Y Yellow LED 2-1/2" Sealed 13 Diode Pattern Light Emitting Diodes (LED) Designed at 14v,.1 amp Mounting: Pages Series Beehive LED 2-1/2" Sealed 8 Diode Pattern Light Emitting Diodes (LED) Designed at 14v,.1 amp Mounting: Page Series Beehive PC Rated 2-1/2" Sealed 15,000 hr. rated bulb life 12v designed at 14v,.33 amp, 2 cp Mounting: Page Series Beehive LED 2" Sealed 2 Diode Red Pattern 5 Diode Yellow Pattern Light Emitting Diodes (LED) Designed at 14v,.05 amp Mounting: Pages corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc

34 Beehive LED 2" Round 10 Diode Pattern Light Emitting Diodes (LED) Designed at 14v,.05 amp Mounting: Pages Series Beehive 2" Sealed 15,000 hr. rated bulb life Designed at 14v,.33 amp, 2 cp Mounting: Page Series Beehive Sealed Lens Assembly Designed at 14v,.33 amp, 2 cp Series Chrome Mount Plastic lens & housing #67 bulb 99066Y yellow lens mounting pad O ring hardware Popular replacement for cab marker or corner trailer applications 10 diode pattern Standard PL-10 connection 3075 Red 3075A Yellow 3076 Red w/clear lens New 3076A Yellow w/clear lens New Features a beehive lens designed for cab marker use Lens & housing are sonically sealed High impact polycarbonate construction 12 volt 15,000 hour rated bulb Suitable for PC requirements on a 45 angle Replaces Signal-Stat 1018 series 30201R 30201Y 30203Y Red Yellow Yellow, clear back Features a beehive lens designed for cab marker use Lens & housing are sonically sealed High impact polycarbonate construction Replaces KD# Y Yellow 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support " A " Features chrome-plated plastic housing with contour base & rubber mounting pad Includes one #67 bulb 26760Y Yellow A PAGE FULL LINE PRODUCT CATALOG C A B M A R K E R C/M 75

35 C/M C A B M A R K E R Surface Mount 25250R Red 25250Y Yellow Hermetically sealed lens & housing Electronics completely sealed in epoxy to resist corrosion & moisture Less susceptible to shock & vibration Draws less current, allowing more power for other vehicle requirements Direct pin-to-circuit board solders assure vibration resistant contacts Includes mounting gasket with #25250R/Y & #25750Y Flush Mount 25750Y Yellow Legal when mounted from 0 to 40 rollback from vertical 25 Series Cab Marker LED Sealed 6 Diode Pattern Polycarbonate or acrylic lens & housing 18 gauge wire Light Emitting Diodes (LED) Designed at 13.5v,.1 amp mounting gasket Surface Mount 25350R Red 25350Y Yellow FULL LINE PRODUCT CATALOG SEE ABOVE SEE ABOVE Features surface mount design for replacement on Mack trucks Sonically sealed lens & housing Mounting gasket included to improve seal of lamp & body Recommend Truck-Lite s #94940 plug & #194 bulb Not suitable for PC requirements 25766R Red 25766Y Yellow SCREW HOLE DIAMETER Features flush mount design for replacement on Mack trucks Sonically sealed lens & housing Recommend Truck-Lite s #94940 plug & #194 bulb Not suitable for PC requirements 25765Y Yellow Series Surface Mount Rubber mounting gasket Bulb: #194 not included plug gasket 25 Series Flush Mount Bulb: #194 not included plug gasket 76 corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc SCREW HOLE DIAMETER

36 25 Series Combination Mount Rubber mounting gasket Bulb: #904 not included plug gasket Rubber Base Polycarbonate lens Rubber base Bulb: #193 Replacement parts: 9069A yellow lens Mini Aerodynamic Direct connect socket M5 mounting studs Bulb: #194 wedge base Replacement parts: 99165Y yellow lens plug assembly Triangular Polycarbonate lens Steel housing Rubber mounting pad Bulb: #904 Replacement parts: 99063R red lens 99063Y yellow lens lamp gasket mounting gasket Features unique lens design for applications requiring a surface mount combination lamp Mounting gasket included to improve seal between lamp & vehicle Suitable for PC requirements when mounted on a 45 angle 25784R Red 25784Y Yellow For GM cab marker lamps 1969 to the present Polycarbonate lens 1313A Amber Features mini aerodynamic design for replacement on Ford trucks #F81B A Screw on polycarbonate lens & housing Mounts on 1-3/4" centers with foam gasket seal & M5 mounting studs Kit includes #95119 plug assembly to connect socket (mating to AMP ) Suitable for PC requirements on a 45 angle 25062Y Yellow, kit 25062Y1 Yellow, kit 25762Y Yellow, lamp Features single screw lens mounting for quick installation & bulb replacement Rubber mounting pad included to improve seal between lamp & body Mounts on 1-1/2" mounting hole centers Suitable for PC requirements on a 45 angle 26771R Red 26771Y Yellow 26771Y1 Yellow Y shown A shown 15,000 hour bulb PAGE PAGE R shown 2009 FULL LINE PRODUCT CATALOG C A B M A R K E R C/M SCREW HOLE DIAMETER 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

37 2009 FULL LINE PRODUCT CATALOG C A B M A R K E R C/M 1320A shown 1312A shown 25760Y shown Features single screw lens mounting for quick installation & bulb replacement Contoured rubber mount provides additional shock protection Suitable for PC requirements on a 45 angle 26765R Red 26765Y Yellow 26765Y1 Yellow High-impact polycarbonate, gray finish, protects against rust and corrosion Versatile installation mounts on flat or slightly curved surface Thick neoprene pad seals out dirt & moisture 1320AD Yellow SCREW HOLE DIAMETER 5.56" 1.75" 2.94" One-piece chrome die cast housing Includes Neoprene mounting pad to cushion lamp for long bulb life Fits securely on all flat 2.75" or slightly curved surfaces Single retaining screw holds lens in place 2.50" 1312A Yellow 8.0" 6.75" Features surface mount design for replacement on many Ford trucks Contains #94940 plug assembly & one #194 wedge base bulb Lens & housing are sonically sealed Suitable for PC requirements on a 45 angle Replaces Signal-Stat 1360A 25760Y Yellow, w/gray mount 25760Y1 Yellow, w/gray mount 25780R Red, w/black mount 3.0" Cab Marker Rubber Mount Acrylic lens Rubber mount Bulb: #67, 12v 99067R red lens 99067Y yellow lens 9162 plug Cab Marker Lamp Bulb: #67, 12v 99067R red lens 99067Y yellow lens 9162 plug Cab Marker Die Cast Chrome Acrylic lens Die cast housing Bulb: #67, 12v 9087A yellow lens 9087 red lens Cab Marker Surface Mount Acrylic lens ABS housing Bulb: #194 wedge base SCREW HOLE DIAMETER corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc

38 Cab Marker Plastic Mount Bulb: #194 wedge base yellow lens improve seal between lamp & body gasket plug Suitable for PC requirements on a Cab Marker Low Profile Polycarbonate lens Rubber housing Bulb: # A yellow lens Chrome Cab Marker Bulb: # A yellow lens Chrome Cab Marker Bulb: # A yellow lens 8943 red lens 8943W clear lens Features snap-on lens & base mounting for quick bulb replacement Replace standard lamps used on many Mack trucks Contains one #194 wedge base bulb & #94940 plug assembly Mounting gasket #07022 included to 45 angle 25761Y Yellow GMC Replacement # Rubber base, polycarbonate lens 1365A Yellow Ford replacement lamp Shock/Mount for maximum bulb life High impact Permastat housing, chrome finish Modern rectangular styling improves appearance & reduces wind resistance Triple plated chrome finish Versatile installation mounts on flat or slightly curved surface without disassembly Thick Neoprene mounting pad seals out dirt & moisture 1350A Yellow High-impact polycarboante, chrome finish housing Triple-plated chrome finish housing will not rust or corrode Snap-on lens permits easy bulb & lens replacement Versatile installation mounts on any flat or contoured surface without disassembly Neoprene mounting pad seals out dirt & moisture 1319 Red 1319A Yellow 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support SCREW HOLE DIAMETER 2009 FULL LINE PRODUCT CATALOG C A B M A R K E R C/M 79

39 C/M I D E N T F I C AT I O N B A R 33740R shown US patent pending World s smallest LED marker lamp for the transportation industry Hard-wired lamp design is easily retrofitted Requires 3/4" mounting hole Additional part numbers available with extended harness lengths call customer service for details 33740R 33751R Red, 3 lamp grommet mount Red, 5 lamp grommet mount New 33 Series ID Assembly PVC grommet Nylon flange Designed at 14 volts,.05 amp 8" 8" 8" 56" 2009 FULL LINE PRODUCT CATALOG Designed to fit applications requiring minimal space Slim 1" width is perfect for upper rail mounting Draws less current, allowing more power for other vehicle requirements ID Bars - 9" centers / 23" length 35741R Red, kit 35741Y Yellow, kit Harness w/.156 bullet ID Bars - 6" centers / 17" length 35740R Red, kit 35740Y Yellow, kit Harness w/.156 bullet LED 35 Series ID Bar Aluminum Extruded aluminum bar 35740R/Y kits: R/Y LED lamps ID bar w/6" center wiring harness 35741R/Y kits: R/Y LED lamps ID bar w/9" center wiring harness corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc.

40 LED 15 Series ID Bar Stainless Steel Polycarbonate lens & housing Stainless steel bar 14 gauge wire Light Emitting Diodes (LED) Designed at 14v,.05 amps 15050R/Y kit: R or 15250Y LED lamps ID bar wiring harness 15 Series Polycarbonate ID Bar Polycarbonate lens, housing & ID bar 12v bulb,.33 amp, 2 cp 15745R/Y kits: R 12v lamps ID bar wiring harness Model 15 Stainless Steel ID Bar Stainless steel or metal bar 14 gauge wire 12v bulb,.33 amp, 2 cp 15741R kit: R 12v lamps ID bar wiring harness Designed to fit applications requiring minimal space Features stainless steel bar with three LED Model 15 lamps on 6" centers Electronics completely sealed in epoxy to resist corrosion & moisture Sonically sealed lens & housing Less susceptible to shock & vibration Draws less current, allowing more power for other vehicle requirements Direct pin-to-circuit board solders assure vibration resistant contacts 15050R 15050Y Red, kit Yellow, kit New SCREW HOLE DIAMETER SCREW HOLE DIAMETER 1.38 Features high impact polycarbonate ID bar designed to fit in limited mounting areas Lamps are mounted on 6" centers Direct replacement for Ford Fits in most narrow header rails Snap-lock tabs allow easy installation Replaces Signal-Stat R Red, kit 15745Y Yellow, kit Features rugged stainless steel ID bar designed to fit in limited mounting areas Lamps are mounted on 6" centers Direct replacement for Ford Fits in most narrow header rails Snap-lock tabs allow easy installation 15741R Red, kit 2009 FULL LINE PRODUCT CATALOG I D E N T F I C AT I O N B A R C/M SCREW HOLE DIAMETER 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support

41 2009 FULL LINE PRODUCT CATALOG I D E N T F I C AT I O N B A R C/M SCREW HOLE DIAMETER 10744R AND 10745R Features rugged stainless steel or black enameled ID bar Lamps are mounted on 6" or 9" centers 10744R Red, kit w/6" centers 30740R Red, kit w/6" centers 10745R Red, kit w/9" centers 30742R Red, kit w/9" centers Stainless steel bar w/6" centers SCREW HOLE DIAMETER 30740R AND 30742R Features zinc-plated steel bar in either 15" or 20" lengths Bar contains three lamps with #67 bulb & lens retention snap rings 26740R 26741R Red, kit w/20" bar Red, kit w/15" bar Features white finish aluminum ID bar Lamps are mounted on 6" centers Bar design allows for easy installation & conceals wiring harness & mounting screws Bulb replaceable lamps feature ABS housing & acrylic lens Replaces Truck-Lite series 1295 Red 1295A Yellow & 30 Series Stainless Steel or Metal ID Bar Stainless steel or black enameled metal bar 14 gauge wire 12v bulb,.33 amp, 2 cp 10744R or 30740R kits: R or 30200R lamps ID bar w/6" centers wiring harness 10745R or 30742R kits: R or 30200R lamps ID bar w/9" centers wiring harness 26 Series Stainless Steel ID Bar Acrylic lens Zinc-plated steel bar 18 gauge wire Bulb: # red lens snap ring Series Starburst Design Aluminum ID Bar Acrylic lens & housing Aluminum bar Bulb: #168 wedge base 8934 red lens 8934A yellow lens SCREW HOLE DIAMETER corporate@truck-lite.com 2009 All rights reserved. Truck-Lite Co., Inc. 2.37

42 26 Series Plastic ID Bar Acrylic lens ABS housing & bar Bulb: Two #193 wedge base 9007 red lens 9007A yellow lens Pee Wee Steel ID Bar Acrylic lens & housing Polycarbonate bar Bulb: # red lens 9342A yellow lens Slimline Aluminum ID Bar Aluminum bar Bulb: # red lens 9082A yellow lens High-impact Permastat bar & housing Uni-body housing simplifies installation & will never rust Shock/Mount for maximum bulb life Low profile styling Each light features two bulbs for superior visibility & reliability Snap-on lens makes bulb & lens replacement easy Felt mounting pad is specially treated to protect against dirt & moisture Replaces Truck-Lite series 1215 Red, black finish bar 1216 Red, white finish bar 1216A Yellow, white finish bar Popular economy identification bar for light duty applications Acrylic lens & housing Coated polycarbonate bar 1508R Red Black aluminum bar Shock/Mount for maximum bulb life Polycarbonate lens Ideal for mounting in narrow channels Snap-on lens makes bulb & lens replacement easy 1523 Red 1216 shown 15,000 hour bulbs 2009 FULL LINE PRODUCT CATALOG I D E N T F I C AT I O N B A R C/M 2009 All rights reserved. Truck-Lite Co., Inc. Customer Service Technical Support