70 MPa. Type TK17 H 2. WEH - We Engineer Hightech WEH H 2. Fuelling Nozzle with exchangeable data interface (ENR) DATA SHEET
|
|
- Vivian Marshall
- 5 years ago
- Views:
Transcription
1 D-2014/10/ Date: 07/2015 Type TK17 H 2 70 MPa WEH H 2 Fuelling Nozzle with exchangeable data interface (ENR) for cars at self-service fuelling stations WEH - We Engineer Hightech
2 General DESCRIPTION Impact protection with exchangeable nozzle receiver Hand grip Actuation lever Logo cap 250 Swivel joint Features Left or right single-handed operation Compatible with WEH TN1 H 2 70 MPa Receptacle profile Exchangeable nozzle receiver (ENR) Protecion against impact and cold WEH EASY-TURN 250 swivel joint Easy operation Extremely high flow rate short filling times Plastic thermal protection Hand grip with magnet WEH Jaw locking mechanism High-grade materials Coding for pressure range / gas type Locking lever Data cable / IR interface The WEH TK17 H 2 70 MPa Fuelling nozzle with exchangeable nozzle receiver was developed for refuelling cars with compressed hydrogen (CGH 2 ). The fuelling nozzle provides the same proven characteristics as the actual known TK17 H 2 70 MPa. The IR data interface which is located at the front part of the fuelling nozzle ensures proper communication between the vehicle and the fuelling station thus achieving the optimum filling level. So far the complete fuelling nozzle has had to be sent in for repair in case of damage or malfunction of the data interface. With this version of the TK17 H 2 70 MPa, however, the data interface can now be easily exchanged by specially trained personnel on the spot and within a very short time. Downtimes are reduced. The continuous rubber protection offers optimal protection not only for the vehicle and the front part of the fuelling nozzle against damage, impacts and weather-related influences, but also for the operator against frostbitten hands. Safety WEH TK17 H 2 70 MPa with exchangeable nozzle receiver offers optimum safety to the operator. The fuelling nozzle remains connected to the receptacle until the system is depressurized. Application Fuelling nozzle for H 2 fast filling of cars at self-service fuelling stations. RECEPTACLE - pressure range/coding HF * 700 NOZZLE - pressure range/coding HF * * HF = High-Flow TECHNICAL DATA Characteristic Basic version Options Nominal bore DN 4 mm On request Pressure range PN = 700 (10,000 psi) PS = 875 PT = 1255 Temperature range -40 C up to +85 C (-40 F up to +185 F) On request Material Corrosion resistant On request Sealing material Hydrogen compatible On request Design With plastic thermal protection, hand grip with magnet and exchangeable nozzle receiver. Without gas recirculation On request Weight Approx. 2,2 kg (4.85 lbs.) Nozzle: PED97/23/EC: CE0036 and SAE J2600:2002 SAE TIR J2799 Registration ATEX data interface: CSA-C22.2 No. 213-M1987 (R2008) ANSI/ISA CSA-E (R2011) UL (Ed.5) NEC data interface: Class I Div 2 IIC T4 and Class I Zone 1 AEx ib IIC T4 Gb Page 2 D-2014/10/
3 175 Ø 70 Type TK17 H 2 Ordering / Accessories ORDERING WEH TK17 H 2 70 MPa Fuelling nozzle with exchangeable nozzle receiver (ENR) approx. dimensions (mm) 339 Ø 46 B1 Pressure (PN) Inlet B1 (external thread) C TK17 H 2 70 MPa (ATEX data interface) 700 / 10,000 psi UNF 9/16-18* C TK17 H 2 70 MPa (NEC interface) 700 / 10,000 psi UNF 9/16-18* * 60 inner cone Complete nozzle-hose-assemblies consisting of fuelling nozzle, hose set and breakaway coupling are available on request. ACCESSORIES The following accessories are available for the WEH TK17 H 2 70 MPa Fuelling nozzle with exchangeable nozzle receiver: High pressure filling hoses High pressure filling hose for connecting fuelling nozzle and TSA1 H 2 70 MPa breakaway coupling, complete with hose fittings, plastic spiral hose and cable for data interface. Design: max. operating pressure PS: 875 (12,690 psi) / nominal bore DN: 6.3 mm B2 B1 Filling hose B1/B2 (internal thread) Hose length E UNF 9/16-18* 3 m E UNF 9/16-18* 4 m E UNF 9/16-18* 5 m * DKJ 58 D-2014/10/ Page 3
4 Accessories Dispenser mounting Mounting for safe attachment of the fuelling nozzle to the dispenser. Design: Aluminium, stainless steel Switch actuated mounting with weather protection and special protection for impact protection sleeve approx. dimensions (mm) Mounting with magnetic field sensor, movable weather protection and special protection for impact protection sleeve approx. dimensions (mm) Ø Ø C C Mounting (switch actuated) with weather protection and special protection for impact protection sleeve Mounting with magnetic field sensor, movable weather protection and special protection for impact protection sleeve Page 4 D-2014/10/
5 Accessories Data cable Data cable for connecting controller and dispenser. E Data cable 3.45 m Spare parts Various parts are available as spares for the TK17 H 2 70 MPa fuelling nozzle with exchangeable nozzle receiver. 1 Impact protection sleeve Data interface (inside) 2 4 Logo cap 5 Plastic thermal protection Locking lever 3 E Impact protection sleeve (incl. 3 countersunk screws) E ATEX data interface (incl. 3 cylinder screws and 3 countersunk screws) E NEC data interface (incl. 3 cylinder screws and 3 countersunk screws) E Locking lever W Logo cap incl. label plate E Plastic thermal protection E Maintenance spray When ordering please quote the part no. engraved on the fuelling nozzle. D-2014/10/ Page 5
6 Other products OTHER PRODUCTS You will find more products in our current catalogue no. 50 Further information on our homepage Contacting For queries and further information, please do not hesitate to contact us. Manufacturer: WEH GmbH Gas Technology Josef-Henle-Str Illertissen / Germany Phone: Fax: h2sales@weh.com All rights reserved, WEH GmbH Any unauthorized use is strictly forbidden. Subject to alteration. No liability will be assumed for any content. Herewith previous versions are no longer valid. Page 6 D-2014/10/
High-Flow. Type TK16 H 2. WEH - We Engineer Hightech WEH H 2. Fuelling Nozzle with Data Interface DATA SHEET
D-2014/03/00016-0-3 Date: 05/2014 Type TK16 H 2 High-Flow WEH H 2 Fuelling Nozzle with Data Interface for buses and trucks at self-service fuelling stations WEH - We Engineer Hightech Type TK16 H 2 General
More informationData sheet. D-2011/05/ Date: 02/2013. Type TK16 CNG. CNG Fuelling Nozzle. for cars at self-service fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TK16 CNG CNG Fuelling Nozzle for cars at self-service fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description 1 Impact protection 2 Actuation
More informationDatA sheet. D-2011/05/ Date: 02/2013. Type TK10 CNG. CNG Fuelling Nozzle. for cars FUTURE. TECHNOLOGY. TODAY.
DatA sheet D-2011/05/00160-3-3 Date: 02/2013 Type CNG Fuelling Nozzle for cars FUTURE. TECHNOLOGY. TODAY. Type Fuelling nozzle for cars General Description Ball valve Sliding sleeve 1 Hand grip TK4 CNG
More informationData sheet. D-2011/05/ Date: 07/2013. Type TK4 CNG. CNG Fuelling Nozzle. for cars. WEH - We Engineer Hightech
Data sheet D-2011/05/00160-4-3 Date: 07/2013 Type TK4 CNG CNG Fuelling Nozzle for cars WEH - We Engineer Hightech General Description Sliding sleeve Media inlet Features Compatible with receptacles acc.
More informationData sheet. D-2011/05/ Date: 07/2013. Type TK1 CNG. CNG Fuelling Nozzle. for time filling of cars. WEH - We Engineer Hightech
Data sheet D-2011/05/00160-4-3 Date: 07/2013 Type TK1 CNG CNG Fuelling Nozzle for time filling of cars WEH - We Engineer Hightech General Description Sliding sleeve Media inlet Features Compatible with
More informationDATA SHEET. D-2014/03/ Date: 05/2014. Type TSA2 H 2. WEH Inline Breakaway Coupling. for car fuelling stations. WEH - We Engineer Hightech
D-2014/03/00016-0-3 Date: 05/2014 Type TSA2 H 2 WEH Inline Breakaway Coupling for car fuelling stations WEH - We Engineer Hightech General DESCRIPTION Receptacle insert Eccentric actuator coupling body
More informationDatA sheet. D-2011/05/ Date: 02/2013. Type TSA2 CNG. Inline breakaway Coupling. for car fuelling stations FUTURE. TECHNOLOGY. TODAY.
DatA sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSA2 CNG Inline breakaway Coupling for car fuelling stations FUTURE. TECHNOLOGY. TODAY. DATA sheet General Description Receptacle insert Eccentric actuator
More informationDATA SHEET. D-2011/05/ Date: 05/11. Type TSA1 CNG. Breakaway coupling. for car fuelling stations FUTURE. TECHNOLOGY. TODAY.
DATA SHEET D-2011/05/00160-0-3 Date: 05/11 Type Breakaway coupling for car fuelling stations FUTURE. TECHNOLOGY. TODAY. Type Breakaway coupling for car fuelling stations DatA SHEET General Breakaway receptacle
More informationDATA SHEET. D-2011/05/ Date: 05/11. Type TSA6 CNG. Inline breakaway coupling. for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY.
DATA SHEET D-2011/05/00160-0-3 Date: 05/11 Type TSA6 CNG Inline breakaway coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY. DatA SHEET General Description Breakaway receptacle Eccentric
More informationData sheet. D-2011/05/ Date: 02/2013. Type TSA6 CNG. Inline breakaway Coupling. for bus and truck fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSA6 CNG Inline breakaway Coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description Receptacle insert Eccentric actuator
More informationData sheet. D-2011/05/ Date: 02/2013. Type TSA5 CNG. Breakaway Coupling. for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY.
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type Breakaway Coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY. General Receptacle insert Eccentric actuator coupling body Features Re-usable
More informationData sheet. D-2011/05/ Date: 02/2013. Type TN1 CNG. Receptacle. for refuelling of cars with CNG FUTURE. TECHNOLOGY. TODAY.
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TN1 CNG Receptacle for refuelling of cars with CNG FUTURE. TECHNOLOGY. TODAY. General Description Features Compatible with fuelling nozzles acc. to NGV1
More informationRefuelling High-Performance Components for Hydrogen Vehicles and Fuelling Stations
Catalogue 50 H 2 Refuelling High-Performance Components for Hydrogen Vehicles and Fuelling Stations Fuelling technology for hydrogen Date: 05/2014 WEH - We Engineer Hightech All rights reserved, WEH GmbH
More informationData sheet. D-2011/05/ Date: 02/2013. Type TS50 CNG. Fuelling System. for installation in cars FUTURE. TECHNOLOGY. TODAY.
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TS50 CNG Fuelling System for installation in cars FUTURE. TECHNOLOGY. TODAY. General Description Features Integrated WEH TN1 CNG receptacle (NGV1) with
More informationType TSF2 CNG FUTURE. TECHNOLOGY. TODAY. Coalescing Filter. Data sheet. for installation onboard CNG vehicles and in fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSF2 CNG Coalescing Filter for installation onboard CNG vehicles and in fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description Features Fine
More informationWEH CNG FUELING SOLUTIONS
FUELING TECHNOLOGY»» WEH CNG FUELING SOLUTIONS PRODUCT OVERVIEW 2014 Products for safe and easy CNG vehicle refueling WEH We Engineer Hightech OVERVIEW» WEH CNG Fueling Products Nozzles, Breakaways, Receptacles,
More information2018 CNG Refueling High-Performance Components for Natural Gas Vehicles and Fueling Stations
2018 CNG Refueling High-Performance Components for Natural Gas Vehicles and Fueling Stations Fueling technology for natural gas Catalog 15 Date: 03/2018 WEH - We Engineer Hightech All rights reserved,
More informationType TW02. WEH - We Engineer Hightech. WEH Connector for pressure and vacuum testing DATA SHEET
D-2011/09/00027-10-3 Date: 01/2017 Type TW02 WEH Connector for pressure and vacuum testing of straight tubes, hoses and components with bead or collar WEH - We Engineer Hightech General DESCRIPTION Features
More informationBrief Overview 2018 WEH CNG Fuelling Solutions Products for safe and easy CNG vehicle refuelling WEH Q UA LIT Y. since 1973
Brief Overview 2018 WEH CNG Fuelling Solutions Products for safe and easy CNG vehicle refuelling ORIGINAL WEH Q UA LIT Y since 1973 OVERVIEW» WEH CNG Fuelling Products Nozzles, receptacles, breakaways,
More informationType TW17 FUTURE. TECHNOLOGY. TODAY. WEH Connector for pressure and function testing. DatA Sheet. on components with internal thread
Dat Sheet D-2011/09/00027-2-3 Date: 01/2013 Type TW17 WEH Connector for pressure and function testing on components with internal thread FUTURE. TECHNOLOGY. TODY. General Description Features Connection
More information2018 High Performance Check Valves for liquid and gaseous media
2018 High Performance Check Valves for liquid and gaseous media Check valves Catalogue 45 Date: 04/2018 WEH - We Engineer Hightech All rights reserved, WEH GmbH 2018. Unauthorized copies are strictly forbidden
More informationBrief Overview 2018 WEH CONNECTOR SOLUTIONS for pressure-tight connections in seconds WEH Q UA LIT Y. since 1973
Brief Overview 2018 WEH CONNECTOR SOLUTIONS for pressure-tight connections in seconds ORIGINAL WEH Q UA LIT Y since 1973 WEH Quick Connectors for pressure and function testing, filling and plugging Internal
More informationValve technology for the gas industry Date: 04/2013
Catalog 55 High pressure valves TV17 for inert gases up to 6,000 psi (420 bar) Valve technology for the gas industry Date: 04/2013 FUTURE. TECHNOLOGY. TODAY. All rights reserved, WEH GmbH 2013. Unauthorized
More informationConnection solutions for industrial applications Date: 07/2014
Catalogue 35 WEH Connectors Pressure-tight connections in seconds to threads, beads, tubes, etc. Connection solutions for industrial applications Date: 07/2014 WEH - We Engineer Hightech ll rights reserved,
More informationBuild the future, prepare for LNG
LNG Liquefied Natural Gas is the efficient new green fuel Build the future, prepare for LNG Manufacturing safe and innovative quality products Your LNG partner: LNG Vent Connections Male Quick Disconnect
More informationSafety Shut-Off Valve HON 711
Product information serving the gas industry worldwide Applications, characteristics, technical data Applications Safety device in gas pressure regulating stations Applicable for use with natural gas according
More informationUnderbody Deadener Heat Cure
R y R Underbody Deadener AUTOMATIC SPRAY PrecisionFlo Solutions PrecisionFlo 970-128 show with panel-mount controller View of PrecisionFlo Plus touch screen controller only Description Part No. Literature
More informationSolenoid Valves Type 3963
Mounting and Operating Instructions Solenoid Valves Type 3963 Fig. 1 General Assembly, commissioning and operation of these devices may only be performed by experienced personnel. Proper shipping and appropriate
More informationOverview. Specifications. Applications
Vibranivo Level limit switch 1 Series VN 00 / 000 / 000 / 000 Table of content Page Overview P Specifications P Applications P ------------------------------------------------------------------------------------------------------------
More informationBC Spare parts list. Bucket crusher. BC 2500 s/n DEQ Construction Tools GmbH No
BC 2500 Spare parts list Bucket crusher BC 2500 s/n DEQ159235 2018 Construction Tools GmbH No. 3390786201 2018-01-01 General information This spare parts list applies to the following: Part number Description
More informationGas-actuated thermometer with switch contacts Stainless steel version Model 73
Temperature Gas-actuated thermometer with switch contacts Stainless steel version Model 73 WIKA data sheet TV 27.01 for further approvals see page 12 Applications Control and regulation of industrial processes
More information(FLB-1000 & FLB-5000)
INSTALLATION INSTRUCTIONS FOR QUALIFIED TECHNICIANS FOR CNG FILL- LINE BREAKAWAY DEVICES (FLB-1000 & FLB-5000) 207943 JULY 2014, REV C ANSI/1AS NGV 4.4-1999 CSA 12.54-M99 FOR USE WITH ANY CERTIFIED ELECTRICALLY
More informationTITGEMEYER Tb1421GB(1115)1. TIFAS LockBolt Pin and collar fastening system
TITGEMEYER Tb1421GB(1115)1 TIFAS LockBolt Brazier head Steel, hardened (Type 5) EN 10263-4 zinc, passivate Nominal pin ø Hole ø Grip range Shear Tensile Clamp Part No. -0.2 s L1 max L2 max d1-0.2 d2* k
More informationMacro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
More informationOperating Instructions
Operating Instructions Load and Motor Switch, Load-Break Switch > 8544/1 Contents 1 Contents 1 Contents...2 2 General Information...2 3 General Safety Instructions...3 4 Designated Use...4 5 Technical
More informationSystem 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter
System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter Application Used to convert a direct-current input signal into a pneumatic output signal for measuring and control
More informationMechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
More informationDry Ice Blasting Unit
Dry Ice Blasting Unit ASCOJET 2008 Combi Pro complete (fully adjustable) part no. 901051 The ASCOJET 2008 Combi Pro combines a powerful double hose system, which can be optionally used as a one-hose system,
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. TEIP11 I/P signal converter for standard signals
ABB MEASUREMENT & ANALYTICS DATA SHEET TEIP11 I/P signal converter for standard signals 2 TEIP11 I/P SIGNAL CONVERTER FOR STANDARD SIGNALS DS/TEIP11-EN REV. D Flow in air pressure Proven and reliable concept
More informationPanic exit devices with integrated latch: Push bars and touch bars complying with EN 1125
DOOR technology order catalogue Panic exit devices with integrated latch: Push bars and touch bars complying with EN 1125 Panic exit devices with integrated latch in compliance with EN 1125 Table of contents
More informationLevel limit switch Series RF 3000 Selection list
Table of content Page Overview P2 Applications P4 ------------------------------------------------------------------------------------------------------------- RF 3100 Standard version P6 -------------------------------------------------------------------------------------------------------------
More informationC 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
More information12 French Drive Mono, ON Canada L9W 5W1 Ph Toll Free Fax
CONTROL HANDLES AND ELECTRONIC METERS 12 French Drive Mono, ON Canada L9W 5W1 Ph. 519-942-8800 Toll Free 1-800-252-5636 Fax 519-942-4799 info@appliedlubrication.com oil Electronic meter RAASM s electronic
More informationModel 3400 Intrinsically Safe Load Cell
Stainless steel construction Sealed connector IP68 environmental protection Internally amplified 4-20 ma output, loop-powered Unipolar (T or C) or bipolar (T and C) Zero and span adjustment access CE certified
More informationOperating Instructions
Operating Instructions Pendant Light Fitting > Contents 1 Contents 1 Contents...2 2 General Information...2 3 General Safety Instructions...3 4 Conformity to Standards...3 5 Intended Field of Application...3
More informationContinuous level measuring system NB 4000 Selection list
Table of contents Page Overview P2 Specification / application P3 P4 Options / Accessories P6 Dimensions / materials P7 Spare parts P9 Electrical installation P11 Subject to change. All dimensions in mm
More informationAir vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
More informationNGV refuelling connections Refuelling
NGV refuelling connections Refuelling Stäubli NGV refuelling connections Comprehensive range of NGV 1 compatible products for the refuelling of all kinds of Compressed Natural Gas vehicles in a safe environment
More informationVolumeter TRZ 03-K PRODUCT INFORMATION. Reliable Measurements of Gas
Volumeter TRZ 0-K PRODUCT INFORMATION Reliable Measurements of Gas Method of operation, Construction Method of operation The TRZ 0-K Volumeter is a flow meter suitable for metering gases, where the rate
More informationAUTOGAS SKIDS. Horizontal aboveground SKID Vertical aboveground SKID Underground SKID EQUIPMENT FOR LPG: AUTOGAS SKIDS MODELS:
EQUIPMENT FOR LPG: AUTOGAS SKIS AUTOGAS SKIS Horizontal aboveground SKI Vertical aboveground SKI Underground SKI Stand-alone LPG storage units with pumping equipment and incorporated in a frame. Includes
More informationFICHA TÉCNICA DE PRODUTO
FICHA TÉCNICA DE PRODUTO PRODUCT DATASHEET HMI Automação e Instrumentação, Lda. Rua dos 5 Caminhos, nº 570 4780-382 Santo Tirso PORTUGAL Web: www.hmi.pt Tel. +351 252 850 501 Fax. +351 300 013 487 Email:
More informationRemote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
More informationLinear Luminaire for Fluorescent Lamps
Linear Luminaire for Fluorescent Lamps Operating instructions Additional languages www.stahl-ex.com General Information Contents 1 General Information...2 1.1 Manufacturer...2 1.2 Information regarding
More informationBUTTERFLY VALVES + NA ELECTRIC ACTUATOR
1150-1158 BUTTERFLY VALVES + NA ELECTRIC ACTUATOR CHARACTERISTICS The butterfly valves 1150 to 1158 are dedicated to the automatic opening/shut-off of various fluid pipes. It has a ductile iron body. Thanks
More informationLow-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements
Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant
More informationRichter Ball Control Valves Torque transmission free of play
Richter Ball Control Valves Torque transmission free of play ISO/DIN, ASME/ANSI Lining PFA, optionally PFA-P, PFA-HP, PFA-L k vs 0.1-400 ENVIPACK seal maintenance-free Heavy-duty ball control valves with
More informationElectropneumatic Converters i/p Converters Type 6111 Mounting and Operating Instructions EB 6111 EN
Electropneumatic Converters i/p Converters Type 6111 Fig. 1 Type 6111 in standard version Fig. Type 6111 mounted on a supply air manifold Fig. 3 Type 6111 in field enclosure Mounting and Operating Instructions
More information* * Data sheet DA A (ATEX) Differential pressure measuring device for potentially explosive areas
09015062 DB_EN_DA10_ATEX Rev. ST4-A 03/18 *09015062* Data sheet DA10... 0A (ATEX) Differential pressure measuring device for potentially explosive areas Gas explosion protection Zone 1 and 2, gases and
More informationOperating Instructions Garlock Butterfly Valves DN : mm / 2-24
Operating Instructions Garlock Butterfly Valves DN : 50-600 mm / 2-24 PN : 10 / 16 Type: GAR-SEAL SAFETY-SEAL STERILE-SEAL MOBILE-SEAL Conformity declaration... 14 0 Introduction... 15 1 Proper use...
More informationAccessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves
Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning
More informationu High-Flow - the flow path has been matched to provide ample flow for all NGV-1 Type 1 and Type 2 nozzles.
H 2 In-Line Breakaway ( & ILB-H) Designed for medium flow and automotive NGV and hydrogen refueling applications. This unit will function consistently, independent of the inlet pressure. Materials Body:
More informationSempell controlled non-return or Bled Steam Check Valves prevent unallowable pressure built up in the turbine coming due to back-flowing steam.
Sempell controlled non-return or Bled Steam Check Valves prevent unallowable pressure built up in the turbine coming due to back-flowing steam. Features and Benefits Special advantages of the valve series
More informationMicrobore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
More informationLoad and Motor Switches, Load-Break Switches Series 8544
www.stahl.de > Innovative switch concept > State-of-the-art contact arrangement > Easy and clear connection technology > Wiring channel for auxiliary contacts > Retrofittable: alligator clip auxiliary
More informationLoad and Motor Switches, Load-Break Switches Series 8549
www.stahl.de > Innovative switch concept > State-of-the-art contact arrangement > Easy and clear connection technology > Wiring channel for auxiliary contacts > Retrofittable: Pick-off terminal block Auxiliary
More informationILB-5. u Easy Installation - the in-line breakaway has SAE-10 O-ring fittings for easy installation in line between the dispenser and nozzle.
H 2 Materials Body: Stainless steel Internal Components: Stainless steel Seals: Specially formulated polymers and elastomers specific to high-pressure NGV applications. In-Line Breakaway () - Heavy-Duty
More informationHydraulic Impact Wrench Type
M a s c h i n e n f a b r i k G m b H Hydraulic Impact Wrench Type 6 1520 0010 Illustration can differ from the original Operation and Maintenance Manual 615200010_en_Version_03 Page 1 of 19 TECHNICAL
More informationGas-actuated thermometer with switch contacts Model 73, stainless steel version
Mechatronic temperature measurement Gas-actuated thermometer with switch contacts Model 73, stainless steel version WIKA data sheet TV 27.01 for further approvals see page 12 Applications Control and regulation
More informationInstallation and Operational Instructions for ROBATIC -clutch Type and Type Sizes 3 9
Please read the Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationTHOMAFLUID - Handbook IV
Reichelt Chemietechnik GmbH + Co. - Handbook IV lndustrial Connectors of Metal Tubing Squeeze Connections of Metal for Pneumatics Quick-Disconnect Couplings of Plastics and Metal Cocks and Valves of Plastics
More informationCompression load cell Inteco, converter Connexx, mounting kits PR 6001, PR 614x
Compression load cell Inteco, converter Connexx, mounting kits PR 6001, PR 614x The versatile, innovative weighing solution for silo and vessel weighing The load cell Inteco represents a consistent enhancement
More informationSafe, clean and reliable overfill protection systems. HYDRAU-FLO Safety Solutions for Liquid Filling
HYDRAU-FLO Safety Solutions for Liquid Filling Excellent Minerals Solutions Mechanical and non-pressurised fuel filling valves Safe, clean and reliable overfill protection systems Refuelling rates up to
More informationDELTA PR2. Operating Manual. Sampling Valve. Read and understand this manual prior to operating or servicing this product.
Operating Manual DELTA PR2 Sampling Valve Read and understand this manual prior to operating or servicing this product. UK Declaration of Conformity for Valves and Valve Manifolds SPX Flow Technology
More informationSurface thermocouple Model TC50
Temperature Surface thermocouple Model TC50 WIKA data sheet TE 65.50 for further approvals see page 2 Applications To measure surface temperatures on flat surfaces or pipes, in both laboratory and industrial
More informationHigh Purity PVDF/PP Valves and Flowmeters
High Purity PVDF/PP Valves and Flowmeters Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Quality is important for us Your reliable partner Since 1988, GEMÜ has been an Industry
More informationDeclaration of Conformity as per Directive 97/23/EC
Declaration of Conformity as per Directive 97/23/EC The manufacturer declares that:, 47906 Kempen, Germany PTFE-lined Rotary plug valves Series 23e, with packing with lever for 90 operation with worm gear
More informationTZIM. Electropneumatic Analog Positioner 10/ EN
TZIM Electropneumatic Analog Positioner EP001XA.tif Q Convenient, simple design Q Easy to handle Q User-friendly operation, easy to understand Q Reliable concept, I/P conversion through the 500,000 times
More informationSpin-on filter according to Bosch Rexroth standard: Type 50 SL 30 to 80D. Features. Contents. RE Edition:
Spin-on filter according to Bosch Rexroth standard: Type 50 SL 30 to 80D RE 51476 Edition: 2015-06 Nominal sizes: 30 to 80D Connection up to G1; SAE 10 56558_d Features Spin-on filters are used in hydraulic
More informationWATERFLUX 3070 Quick Start
WATERFLUX 3070 Quick Start Battery powered electromagnetic water meter Electronic Revision ER 4.3.0_ up to ER 4.3.4_ (SW.REV 4.2.2_ up to 4.2.5_) KROHNE CONTENTS WATERFLUX 3070 1 Safety instructions 4
More informationDL 01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
DL 0 Battery Powered for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless
More informationMounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Type 3535 Three-way Valve with bellows seal and rod-type yoke (partial view) Mounting and Operating Instructions EB 8135/8136 EN Edition
More informationType 4746 Electric or Pneumatic Limit Switch
Type 4746 Electric or Pneumatic Limit Switch Application Limit switches with inductive, electric or pneumatic contacts for attachment to pneumatic or electric control valves, to Type 4763 Electropneumatic
More informationSITRANS F flowmeters SITRANS F C
SITRNS F flowmeters Siemens G 2008 Overview is available as a standard version (DN 50 to DN 150 (2 to 6 )) and a hygienic, EHEDG certified version (DN 20 to DN 80 (¾ to 3 )). MC2 and MC2 hygienic are suitable
More informationInline filter with filter element according to Bosch Rexroth standard. Type 16 FE Features. Contents
Inline filter with filter element according to Bosch Rexroth standard Type 16 FE 2500... 7500 RE 51403 Edition: 2014-11 Replaces: 01.09 Sizes according to according to Bosch Rexroth standard: 2500... 7500
More informationBP 3050, 3050 R. Spare parts list. Bulk pulverizer. BP 3050 s/n DEQ BP 3050 R s/n DEQ
BP 3050, 3050 R Spare parts list Bulk pulverizer BP 3050 s/n DEQ169179 - BP 3050 R s/n DEQ169179-2018 Construction Tools GmbH No. 3390758101 2018-01-01 General information This spare parts list applies
More informationBP 2050, 2050 R. Spare parts list. Bulk pulverizer. BP 2050 s/n DEQ BP 2050 R s/n DEQ
BP 2050, 2050 R Spare parts list Bulk pulverizer BP 2050 s/n DEQ169181 - BP 2050 R s/n DEQ169181-2018 Construction Tools GmbH No. 3390756701 2018-01-01 General information This spare parts list applies
More informationRHM04. Compact Coriolis Flow Sensor With Enhanced Performance. Features. Applications. Benefits
RHM04 Compact Coriolis Flow Sensor With Enhanced Performance Features Standard high pressure versions up to 1067 bar (15475 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty
More informationSafety Equipment for Hydraulic Accumulators
Safety Equipment for Hydraulic Accumulators 1. DESCRIPTION 1.1. General Hydraulic accumulators are pressure vessels for the purpose of the PED97/23/EC and as such their manufacture is subject to the statutory
More informationOPTIMASS 3000 Technical Datasheet
OPTIMASS 3000 Technical Datasheet Sensor for mass flow First choice for low flow applications Certified secondary pressure containment A common footprint for all three sizes, in Hastelloy or Stainless
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationWK /2 WAY CARTRIDGE VALVE TYPE URZS 16 COVER FOR CARTRIDGE VALVE TYPE ULZS 16. size 16 up to 42 MPa 140 dm 3 /min DESCRIPTION OF OPERATION
2/2 WAY CARTRIDGE VALVE TYPE URZS 16 COVER FOR CARTRIDGE VALVE TYPE ULZS 16 size 16 up to 42 MPa 140 dm 3 /min WK 450 950 04.1999r. 2/2 way cartridge valve type URZS 16 can be used to build hydraulic systems
More informationSITRANS F flowmeters SITRANS F C SITRANS F C MC2 4/169. Overview
Siemens G 2009 SITRNS flowmeters SITRNS C SITRNS C MC2 Overview SITRNS C MC2 is available as a standard version (DN 50 to DN 150 (2 to 6 )) and a hygienic, EHEDG-certified version (DN 20 to DN (¾ to 3
More informationPLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL
Series Features: Color coding and pin configuration makes it physically impossible to mate plugs and receptacles of different voltages and current ratings (per IEC 60 309-2). Interlocked switch mechanism
More informationT R A N S L A T I O N Declaration of Conformity as per Directive 2014/68/EU
T R A N S L A T I O N Declaration of Conformity as per Directive 2014/68/EU The manufacturer declares that: Pfeiffer Chemie-Armaturenbau GmbH, 47906 Kempen, Germany Butterfly valves BR14a, BR14b, BR14b-Type
More information3-port seat valves PN16 with flanged connection
4 440 Acvatix 3-port seat valves PN16 with flanged connection VXF41.. Grey cast iron EN-GJL-250 valve body DN 15...150 k vs 1,9...300 m 3 /h Can be equipped with SAX..-electromotoric or SKD..-, SK..- and
More informationRegards from the Team at Rheology Solutions.
Rheology Solutions is the sole Australian distributor of this product range and we welcome the opportunity of discussing your application requirements. We hope the information you are seeking is contained
More informationOPW Emergency Safety Disconnector. Safety Breakaway Coupling Type NTS-PU Series (Pull-Away) Sizes 1-4 (DN25 DN100) Page 1
OPW Emergency Safety Disconnector Safety Breakaway Coupling Type NTS-PU Series (Pull-Away) Sizes 1-4 (DN25 DN100) Page 1 Content Please read carefully the following OPW user manual to avoid incidents and
More informationVolute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive. Series CNH-ML
Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive Series CNH-ML Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
More informationRichter Ball Control Valves Torque transmission free of play
Richter Ball Control Valves Torque transmission free of play KNR KNAR KNR, KNAR, KNRP, KNARP KNR KNAR ISO/DIN, ASME/ANSI Lining PFA, optionally PFA-L, PFA-HP k vs 0.1-400 Maintenance-free ENVIPACK stem
More information10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
More information