RAUVITHERM AND RAUTHERMEX PRE-INSULATED PIPES FOR DISTRICT HEATING PARTS LIST ENERGY EFFICIENCY. Building Solutions Automotive Industry

Transcription

1 RAUVITHERM AND RAUTHERMEX PRE-INSULATED PIPES FOR DISTRICT HEATING PARTS LIST ENERGY EFFICIENCY Valid from 01. April EN Subject to Technical Alterations Building Solutions Automotive Industry

2 GENERATE YOUR OWN HEAT USING REHAU SOLUTIONS The path to renewable energy supply RAUVITHERM FERMENTER HEATING GAS CONDENSATION CHAMBER RAUTHERMEX HOUSE ENTRY 2

3 CONTENTS PAGE RAUTHERMEX Pre-insulated Pipe, SDR RAUTHERMEX Shroud Kits REHAU Lead-in Bends and House Entries RAUVITHERM Pre-insulated Pipe, SDR RAUVITHERM Screw Fittings RAUVITHERM Shroud Kits REHAU Lead-in Bends and House Entries Special Accessories REHAU EVERLOC TM Jointing Technology, SDR

4 4

5 1 RAUTHERMEX PRE-INSULATED PIPE, SDR 11 RAUTHERMEX, SDR11 Suitable up to max. 95 C and 6 bar, comprising: - carrier pipes made of cross-linked polyethylene (PE-Xa) in accordance with DIN 16892/93 with an orange-coloured oxygen diffusion barrier (EVOH) in accordance with DIN insulation made of continuously manufactured (160 discontiniously produced) CFC-free polyurethane foamed PU and a grey corrugated, seamlessly extruded polyethylene (PE-LLD) outer jacket - Delivery in coils. D d D UNO Pipe Size d s D [kg/m] max. coil length [m] 2,8 m x 0,8 m 2,8 m x 1,2 m / ,3 93 1, / ,9 93 1, / ,7 93 1, / , , / , , / , , / , , /162* , , /182* , , /202* , , /250* , ,14 12 m cut length * From d > = 110 mm carrier pipe, use lubricant for compreession sleeves DUO Pipe Size d s D [kg/m] max. coil length [m] 2,8 m x 0,8 m 2,8 m x 1,2 m / , , / , , / , , / , , / , , UNO Plus Pipe Size d s D [kg/m] max. coil length [m] 2,8 m x 0,8 m 2,8 m x 1,2 m / , / , / , / , / , /182* , * From d > = 110 mm carrier pipe, use lubricant for compreession sleeves DUO Plus Pipe Size d s D [kg/m] max. coil length [m] 2,8 m x 0,8 m 2,8 m x 1,2 m / , , / , , / , , / , ,

6 2 RAUTHERMEX SHROUD KITS RAUTHERMEX T-Shroud for t-pieces Includes: - Sleeve casing set II 76/126 in ABS (76/126 or 76/182)) - Clips in POM (16 or 27) - 3 self ventilating sleeve plugs in POM - 1 sleeve adhesive - Assembly instructions To adapt the T-shroud to different RAUTHERMEX outer jacket diameters, 3 sealing rings of the corresponding size must be used. L-Shroud Pipe Outer Jacket Diameter Small T-Shroud Pipe Outer Jacket Diameter L LargeH Weight [mm] [mm] [kg] Small , Large ,00 RAUTHERMEX I-Shroud Set for straight connections Includes: - Sleeve casing set II in ABS - 12 or 22 clips in POM - 2 self ventilating sleeve plugs in POM - 1 sleeve adhesive - 1 Assembly intsructions To adapt the I-shroud to different RAUTHERMEX outer jacket diameters, 2 sealing rings of the corresponding size must be used. I-Shroud Pipe Outer Jacket Diameter L Weight 1 2 [mm] [kg] Small , Large ,50 RAUTHERMEX L-Shroud Set for elbow connections Includes: - Sleeve casing set II in ABS - 14 or 22 clips in POM - 2 self ventilating sleeve plugs in POM - 1 sleeve adhesive - 1 Assembly instructions To adapt the L-shroud to different RAUTHERMEX outer jacket diameters, 2 sealing rings of the corresponding size must be used 6

7 RAUTHERMEX Coupling Shroud Kits - Special Applications For connecting RAUTHERMEX and/or steel pre-insulated pipes Complete, comprising: - PE moulding - Abrasive belt - Heat-shrink tubing - Air bleeding valves - including PUR-foam L [mm] Coupling Shroud Kit Special Application Special Application Special Application Pipe Diameter of Sheath L [mm] Weight [kg] 3,90 3,90 4,00 H Weight [mm] [kg] Rings RAUTHERMEX Sealing 380 2,16 To adjust the RAUTHERMEX T Shroud Kit Mk II to the RAUTHERMEX Pipes. Each508 branch of the 4,40 T-Shroud is to be sealed off with the relevant sealing ring. The type of sealing ring equals to the type of pipe. (Internal diameter of sealing ring = Outer diameter of the pipe) Material: EPDM for shroud small small small large large large large large large Type Weight [kg] 0,310 0,198 0,096 1,030 0,990 0,900 0,860 0,820 0,624 Delivery Unit REHAU PU Foam Comprising of: - Foam bottle component A - Foam bottle component B - Measuring cap - Instruction Manual For safety cautions, please read the assembly instructions and data sheets. Contact your local Sales Office for more information for RAUTHERMEX I- and L-shroud small RAUTHERMEX T-shroud small RAUTHERMEX I- and L-shroud large RAUTHERMEX T-shroud large Size [kg/piece] 0,95 1,00 1,70 2,30 7

8 3 REHAU LEAD-IN BENDS AND HOUSE ENTRIES REHAU Pre-fabricated Pipe Bend SDR 11 Suitable up to max. 95 C and 6 bar, comprising: - a bent carrier pipe made of cross-linked polyethylene (PE-Xa) as per DIN 16892/92 and an oxygen diffusion barrier as per DIN Insulation with CFC-free, pentane-driven polyurethane foamed PU. - Black PE-HD jacket pipe - Elbow made up of segments produced by means of contact welding Pipe bend length: 1,1 m x 1,6 m. Free laying pipe ends: 250 mm. Pre-fabricated pipe UNO Type 25/91 32/91 40/91 50/111 63/126 75/162 90/ / /182 Carrier pipe d Radius R [kg/piece] 2,3 2,9 3,7 4,6 5,8 6,8 8,2 10,0 11,4 Outer Dia. D Outer Dia. D Radius R [kg/piece] s 2,3 2,9 3,7 4,6 5,8 s 2,85 3,07 3,47 4,92 6,50 8,47 14,23 16,03 Pre-fabricated pipe DUO Type / / / / /182 Carrier pipe d 2 x 25 2 x 32 2 x 40 2 x 50 2 x 63 4,71 4,67 7,42 9,90 13,20 RAUTHERMEX Pre-fabricated Steel Pipe Bend RAUTHERMEX Pre-fabricated pipe bend SDR 11 for hot water transportation. Suitable up to max. 95 C and 6 bar. comprising: - pre-insulated carrier pipe made of steel - Two welded REHAU connectors. Dim: 160 x 14.6mm or 140 x 12.7 mm - Two REHAU compression sleeves Material: Carrier Pipe: Steel St 37.0 Insulation: CFC-free PU foam Outer jacket: Polyethylene (PE-HD) Bend length: 1,1 x 1,1 m Type / /250 8 Dimension Connector 140 x 12,7-139,7 x 3,6 160 x 14,6-168,3 x 4,1 Dimension Compression Sleeve 140 x 12,7 160 x 14,6 Outer Dia. D [kg/piece] 70,00 80,00

9 REHAU Wall Sealing Ring (dry) Watertight up to 2m water column. Suitable as a building inlet through masonry, in conjunction with expansive mortar for non-pressured water. It comprises of a profiled neoprene ring to fit. Suitable for standard RAUTHERMEX sizes. For Plus sizes, the wall sealing ring must fit the respective outer diameter. D (mm) Da (mm) For Dimension RAUTHERMEX [kg/piece] Uno Duo , 32, 40 0, , 32 0, , , 90, , , , ,00 9

10 RAUTHERMEX Wall Sealing Ring FA 80 Suitable as a seal through concrete and in the casing pipe through masonry where water pressure exists (up to 15m water column), comprising of: - comprising seal rubber EDPM Shore 40 ± 5 - seal plates and screws made of V2A - seal rubber in accordance with the KTW recommendation For secure sealing and adequate stabilisation of the pipes, the wall sealing flange FA 40 in a feed-through duct is also recommended. Width (B) approx. 90mm. Wall Sealing Ring 80 mm RAUTHERMEX Sealing Application Sealing Application Core Holes Outer Jacket [mm] Torque Width across flats Internal Diameter D a D i [mm] [Nm] [mm] [mm] ± ± ± ± ± ± ± ± 3 RAUTHERMEX Wall Sealing Ring FA 40 Suitable as a seal through concrete and in the casing pipe through masonry where water pressure exists (up to 5m water column), comprising of: - seal rubber EDPM Shore 40 ± 5 - seal plates and screws made of V2A - seal rubber in accordance with the KTW recommendation For adequate stabilisation of the pipes, two wall sealing flanges FA 40 in a feed-through duct are recommended. Width (B) approx. 45mm. Wall Sealing Ring 40 mm RAUTHERMEX Sealing Application Sealing Application Core Holes Outer Jacket [mm] Torque Width across flats Internal Diameter D a D i [mm] [Nm] [mm] [mm] ± ± ± ± ± ± ± ± 3 10

11 RAUTHERMEX Casing Pipe Suitable for wall sealing flanges FA 40 and FA 80. With a heavily roughened surface for sealing securely against masonry or concrete, casing pipe can be embedded in concrete together with formwork supports in concrete building structures. Material: PVC RAUTHERMEX Casing Pipe Description ID AD Length Weight [mm] [mm] [mm] [kg] Pipe Sleeve , Pipe Sleeve , Pipe Sleeve , Pipe Sleeve ,41 Pipe Sleeve Protective Cap For fixing the casing pipes in concrete wall formwork. Material: PE-LD Colour: Yellow Pipe Sleeve Protective Cap Description ID AD Length Weight [mm] [mm] [mm] [kg] Pipe sleeve protective cap , Pipe sleeve protective cap , Pipe sleeve protective cap , Pipe sleeve protective cap ,294 Epoxy Resin The epoxy resin kit comprises a two-component epoxy resin with drinking water approval in accordance with the KTW recommendation for sealing the concrete or masonry. Also included are a brush (length approx. 40cm) and a pair of latex gloves. Please observe the assembly instructions (included in the set) and safety datasheets (on request). Epoxy Resin-KIT Content Area Covered Weight [kg] ,1 kg 3,5 m² 1,40 11

12 RAUTHERMEX Heat-shrink End Cap (wet environment) Suitable for protecting the foamed pipe ends against moisture, comprising shrinkable PE-X coated with adhesive. Wet end cap Dry end cap RAUTHERMEX Slip on End Cap (dry environment) Suitable for covering the foamed pipe ends in dry rooms, made of PE-LD. UNO Pipe Heat Shrink End Cap Slip on End Cap Marticle Nr. 25/ / / / / / / / / / / DUO Pipe Heat Shrink End Cap Slip on End Cap / / / / /

13 RAUTHERMEX rubber end caps Suitable for the protection of foamed pipe ends from moisture. Made from EPDM. UNO Pipe Rubber end cap 25/ / / / / * 50/ / * 63/ * 75/ * 90/ * 90/ * 110/ * 110/ * 110/ * 125/ * 140/ * 160/ * * Available from Q DUO Pipe Rubber end cap 25+25/ / / * 40+40/ * 50+50/ * 50+50/ * 63+63/ * * Available from Q

14 14

15 4 RAUVITHERM PRE-INSULATED PIPE, SDR 11 RAUVITHERM for Heating and Hot Water Applications (Outer jacket dark grey) Suitable up to max. 95 C and 6 bar, comprising: - carrier pipes made of cross-linked polyethylene (PE-Xa) in accordance with DIN 16892/93 with an orange-coloured oxygen diffusion barrier (EVOH) in accordance with DIN Insulation made of cross-linked PE foam plates and with DUO pipes, an additional white PE foam section is added - Grey, corrugated extruded outer jacket, made of polyehylene. D d S D d S Delivery in coils. RAUVITHERM UNO Pipe Type d s D [kg/m] max. coil length [m] 2.8 x 0.8m / , , / , , / , , / , , / , , / , , / , , /190* , , /210* , , * From d > = 110 mm carrier pipe, use lubricant for compression sleeve max. coil length [m] 2.8 x 1.2m RAUVITHERM DUO Pipe Type d s D [kg/m] max. coil length [m] 2.8 x 0.8m / , , / , , / , , / , , / , , max. coil length [m] 2.8 x 1.2m 15

16 5 RAUVITHERM SCREW FITTINGS REHAU Screw Fittings For screw connection of RAUVITHERM carrier pipes in an above-ground and accessible places. Material: Brass Description Thread [kg/piece] Screw Fitting 25 x 2,3 ¾ 0, Screw Fitting 32 x 2,9 1 0, Screw Fitting 40 x 3,6 1¼ 0, Screw Fitting 50 x 4,6 1½ 0, Screw Fitting 63 x 5,8 2 1,200 16

17 6 RAUVITHERM SHROUD KITS RAUVITHERM T-Shroud Set for tee connections Complete kit includes: - Shroud, made of PE - Heat shrink sleeves - Ventilation plugs - GRP polymer screws - Sealing tape - Installation instructions To fit the respective RAUVITHERM pipe outer jacket diameter to the T-shroud, please use the stepped end sections. For the insulation, use RAUVITHERM foam sets. T-Shroud Outer Jacket Diameter L H [kg/piece] [mm] [mm] Small , Large ,6 RAUVITHERM I-Shroud Set for straight connections Complete kit includes: - Shroud, made of PE - Heat shrink sleeves - Ventilation plugs - Installation instructions To fit the respective RAUVITHERM pipe outer jacket diameter to the I-shroud, please use the stepped end sections. For the insulation, use RAUVITHERM foam sets. I-Shroud Outer Jacket Diameter L [kg/piece] 1 2 [mm] Small , Large ,5 RAUVITHERM L-Shroud Set for elbow connections Complete kit includes: - Shroud, made of PE - Heat shrink sleeves - Ventilation plugs - Polymer screws - Installation instructions To fit the respective RAUVITHERM pipe outer jacket diameter to the L-shroud, please use the stepped end sections. For the insulation, use RAUVITHERM foam sets. I-Shroud Outer Jacket Diameter L [kg/piece] 1 2 [mm] Small , Large ,0 17

18 RAUVITHERM Shrink Collar For repairing RAUVITHERM T-Shrouds, I-Shrouds and L-Shrouds. Piece/Unit [kg/piece] ,70 RAUVITHERM Repair Kits Material Nr. Description Length [mm] [kg/piece] REHAU RAUVITHERM Repair kits for small shrouds 330 0, REHAU RAUVITHERM Repair kits for large shrouds 400 0,30 REHAU PU Foam for insulating - RAUVITHERM T-Shrouds, I-Shrouds & L-Shrouds Comprising of: - Foam bottle component A - Foam bottle component B - Measuring cap - Instruction Manual Please contact your local REHAU Sales Office for safety instructions. for Size [kg/piece] RAUVITHERM T-Shroud small 7 1, RAUVITHERM T-Shroud large 9.1 2, RAUVITHERM I-Shroud small 5 1, RAUVITHERM I-Shroud large 8 1, RAUVITHERM L-Shroud small 6 0, RAUVITHERM L-Shroud large 8.1 1,70 REHAU Temperature Measuring Strips To determine the flow temperature. Piece/Unit Measuring Temperature [kg/piece] C 0,05 REHAU Abrasive Strip For roughing of the Shroud Kits. Length (m) Granulation [kg/piece] P80 0,50 Drill Bit for PU Foam Canister For drilling plug openings on couplings. Diameter (mm) Support (mm) [kg/piece] ,10 Air Bleeding Cap 26 mm For ventilating Generation I Shrouds. Content [kg/piece] ,01 18

19 7 REHAU HOUSE ENTRIES REHAU Pre-fabricated Pipe Bend SDR 11 Suitable up to max. 95 C and 6 bar, comprising: - a bent carrier pipe made of cross-linked polyethylene (PE-Xa) as per DIN 16892/92 and an oxygen diffusion barrier as per DIN Insulation with CFC-free, pentane-driven polyurethane foamed PU. - Black HD-PE jacket pipe - Elbow made up of segments produced by means of contact welding Pipe bend length: 1.1 m x 1,6 m. Free laying pipe ends: 250 mm. Pre-fabricated Pipe UNO Type Carrier Pipe Outer Dia. Radius [kg/piece] d s D R / , , / , , / , , / , , / , , / , , / , / , , / , ,03 Pre-fabricated Pipe DUO Type Carrier Pipe Outer Dia. Radius [kg/piece] d s D R /111 2 x 25 2, , /111 2 x 32 2, , /126 2 x 40 3, , /162 2 x 50 4, , /182 2 x 63 5, ,20 19

20 Wall Penetrations for Pressured Water (with rough outer surface) Consists of PVC wall sleeve and heat shrink sleeve Watertight to 2m water column. For direct installation with expansive mortar or concreted in. Casing diameter for Dimension [kg/piece] Contents [mm] UNO DUO ,32,40 2, ,63,75,90 25,32,40,50 4, , ,72 Wall Penetrations for Pressured Water (including compact sealing ring) Consists of PVC wall sleeve, heat shrink sleeve and compact sealing ring Watertight to 2m water column. For direct installation in a tapping drill hole. Casing Diameter for Dimension [kg/piece] Content [mm] UNO DUO ,32,40 5, ,63,75,90 25,32,40,50 7, , ,32 REHAU Wall Sealing Ring (dry environment) Watertight up to 2m water column Suitable as a building inlet through Masonary, in conjunction with expansive mortar for non-pressured water. It comprises of a profiled neoprene ring to fit. D (mm) Da (mm) For Dimension RAUVITHERM [kg/piece] Uno Duo ,32 0, , , 63 25, 32 0, , , , ,90 * N.B. For RAUVITHERM, the sealing tape below ( ) must be ordered in conjunction. RAUVITHERM Sealing Tape Suitable for sealing the gap between the Wall Sealing Ring and RAUVITHERM Pipe. Made from Butyl rubber Length [m] Width [mm]

21 RAUVITHERM Rubber End Caps Suitable for the protection of foamed pipe ends from moisture. Made from EPDM. UNO UNO 25,32,40 50,63 75, Carton Content [kg/piece] 0,30 0,30 0,30 0,30 0,30 DUO 25,32, Carton Content [kg/piece] 0,30 0,30 0,30 DUO RAUVITHERM Heat-shrink End Cap (wet) Suitable for protecting the foamed pipe ends against moisture, comprising shrinkable PE-X coated with adhesive, including temperature measuring strips and abrasive strips. UNO Pipe 25/120 32/120 40/120 50/150 63/150 75/175 90/ / /210 Carton Content [kg/piece] 0,11 0,11 0,11 0,16 0,18 0,18 0,18 0,24 0,24 Pipe / / / / /210 Carton Content [kg/piece] 0,22 0,22 0,22 0,22 0,22 DUO

22 8 SPECIAL ACCESSORIES District Heating Chamber Multi-functional district heating chamber for all connections d20 d110 The chamber serves to cover and protect REHAU pipe connections, isolation valves or branches. Including stainless steel screw connections for the watertight and permanent connection of the cover and main body of the chamber. Material: PE. Colour: Black. Length [m] Diameter [mm] Dimensions L x B x H [mm] Weight [kg/piece] x 1520 x Description [kg/piece] Heat Shrink Sleeve (330 mm) 0,100 REHAU Pre-Insulated Y-pipe SDR 11 Suitable up to max. 95 C and 6 bar, comprising: - Carrier pipes made of cross-linked polyethylene (PE-Xa) in accordance with DIN 16892/93 with an orange-coloured oxygen diffusion barrier (EVOH) in accordance with DIN Insulation with CFC-free, pentane-driven foamed PU - Black HD-PE jacket pipe - Elbow made up of segments produced by means of contact welding Total Length: 1.8m. F Single pipe Single pipe mm DUO pipe F View Free laying pipe ends: 250 mm. As an adapter from two UNO pipes to one DUO pipe 2 x UNO Pipe D DUO Pipe C Carrier Pipe [kg/piece] d s / / ,3 2, / / ,9 5, / / ,7 5, / / ,6 7, / / ,8 17,00 REHAU District Heating Pipes Warning Tape For marking the position of RAUVITHERM pipes. It should be installed approx. 40cm above the pipes. The tape reads Caution Caution District Heating pipes below Colour: Yellow 22

23 9 REHAU EVERLOC TM JOINTING TECHNOLOGY, SDR11 Width [mm] REHAU EVERLOC TM Compression Sleeve, SDR For sliding on REHAU EVERLOC TM compression sleeve fitting SDR 11 in conjunction with RAUPEX and RAUTHERM pipes SDR 11. Material: Dimension 25-63: CuZn39Pb3 Dimension : Gunmetal Rg 7 Dimension D h [kg/piece] Carton Content Delivery Unit x 2, , piece 50 piece x 2, , piece 50 piece x 3, , piece 25 piece x 4, , piece 25 piece x 5, , piece 25 piece x 6, , x 8, , * 110 x 10, , * 125 x 11, , * 140 x 12, , * 160 x 14, ,450 * From d > = 110 mm Carrier pipe, use lubricant for compression sleeve REHAU Straight Coupler, SDR 11 REHAU EVERLOC TM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU compression sleeves SDR 11. Material: Dimension 25-63: Brass Dimension : Gunmetal Rg 7 z a Dimension a z [kg/piece] Carton Content Delivery Unit x 2, , piece 10 piece x 2, , piece 3 piece x 3, , piece 5 piece x 4, , x 5, , x 6, , x 8, , * 110 x 10, , * 125 x 11, , * 140 x 12, , * 160 x 14, ,500 * From d > = 110 mm Carrier pipe, use lubricant for compression sleeve 23

24 REHAU Reducing Coupler, SDR 11 REHAU compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU compression sleeves SDR 11. Material: Dimension 25-63: Brass Dimension : Gunmetal Rg 7 Dimension a z [kg/piece] Carton Content Delivery Unit x 2,9-25 x 2, , piece 3 piece x 3,7-32 x 2, , piece 5 piece x 4,6-40 x 3, , x 5,8-50 x 4, , x 6,8-63 x 5, , x 8,2-75 x 6, , * 110 x 10,0-90 x 8, ,100 * From d > = 110 mm Carrier pipe, use lubricant for compression sleeves 24

25 REHAU T-Piece, SDR 11 REHAU EVERLOC TM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOC TM compression sleeves SDR 11 Material: Dimension 25-63: Brass b z1 z3 z2 Dimension : Gunmetal (Rg) 5 a c Dimension a b c z 1 z 2 z 3 [kg/piece] Carton Delivery Content Unit EQUAL TEE x 2, , piece 10 piece x 2, , piece 3 piece x 3, , piece x 4, , piece x 5, , piece x 6, , x 8, , x 10, ,000 TEE ON END AND BRANCH REDUCED , piece 3 piece , , , , , , , , , ,500 TEE BRANCH REDUCED , piece 3 piece , , , , , , , , , , , , , , , , , , , ,400 TEE BOTH ENDS REDUCED ,690 TEE ONE END REDUCED , piece 3 piece 25

26 REHAU T-Piece, Pre-insulated incl. Compression Sleeves Steel T-piece with welded-on compression sleeve adapter for use with RAUVITHERM pipes SDR 11 including REHAU EVERLOC TM compression sleeves. Material: T-Piece: Steel St 37 Compression Sleeve: Dimension 25-63: CuZn39Pb3 Dimension : Gunmetal Rg 7 d1 (mm) d2 (mm) d3 (mm) [kg/piece] , , , , , , , , , , , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , * , , , , * , * , * , * , * , * , * , * , * , * , * , * , * ,000 More T-pieces available on request. * From d > = 110 mm Carrier pipe, use lubricant for compression sleeve 26

27 REHAU T-Piece (steel), pre-insulated Pre-insulated Tee made of steel including connectors with compression sleeves o Straight branch (125mm), 45 angled branch (160mm) Material: T-piece: Steel St 37 Compression Sleeve: Dimension 25-63: CuZn39Pb3 Dimension : Gunmetal Rg 7 Insulation: CFC free PU foam Outer Jacket: Polyethylene (PE-HD) d1 (mm) * * requires shroud I 182/200 d2 (mm) d3 (mm) [kg/piece] REHAU T-Piece, Branch with Female Thread, SDR 11 REHAU EVERLOCTM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOCTM compression sleeves SDR 11. Material: Brass Dimension a FEMALE THREAD 25 - Rp ½ Rp ¾ Rp ½ Rp ¾ Rp Rp ½ Rp ¾ Rp Rp ½ Rp ¾ Rp Rp 1 ¼ Rp ½ Rp ¾ TEE FEMALE BRANCH REDUCED END 40 - Rp Rp 1 ¼ b c z1 z3 [kg/piece] CartonContent Delivery Unit ,215 0,225 0,320 0,345 0,420 0,560 0,613 0,700 0,890 1,020 0,930 0,970 1,100 1, piece 50 piece 30 piece 10 piece 10 piece 3 piece ,160 0,890 27

28 REHAU Elbow 45, SDR 11 REHAU EVERLOC TM compression sleeve with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOC TM compression sleeves SDR 11. Material: Dimension 20-63: Brass a z 45 z a Dimension 75: Gunmetal Rg 5 Dimension a z [kg/piece] Carton Content Delivery Unit x 2, , piece 10 piece x 2, , piece 3 piece x 3, , x 4, , x 5, , x 6, ,720 REHAU Elbow 90, SDR 11 REHAU EVERLOC TM compression sleeve with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOC TM compression sleeves SDR 11. Material: Dimension 20-63: Brass Dimension : Gunmetal Rg 5 z z a a Dimension a z [kg/piece] Carton Content Delivery Unit x 2, , piece 10 piece x 2, , piece 3 piece x 3, , x 4, , x 5, , x 6, , x 8, , x 10, ,010 REHAU Male Adapter with Male Thread, SDR 11 REHAU EVERLOC TM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOC TM compression sleeves SDR 11. Material: Brass z a Dimension a z SW [kg/piece] Carton Content Delivery Unit x 2,3 - R ¾ , piece 10 piece x 2,3 - R 1 /L , piece 10 piece x 2,9 - R 1 /L , piece 3 piece x 3,7 - R 1 ¼ , piece 5 piece x 4,6 - R 1 ¼ , x 4,6 - R 1 ½ , x 5,8 - R , x 6,8 - R 2 ½ , x 8,2 - R , x 10,0 - R , x 11,4 - R ,200 28

29 REHAU Female Adapter with Female Thread, SDR 11 REHAU EVERLOC TM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOC TM compression sleeves SDR 11. Material: Brass z a Dimension a z SW [kg/piece] Carton Content Delivery Unit x 2,3 - Rp ¾ , piece 10 piece x 2,3 - Rp , piece 10 piece x 2,9 - Rp , piece 3 piece REHAU Adapter with Welding End, SDR 11* REHAU EVERLOC TM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes and REHAU EVERLOC TM compression sleeves SDR 11. Only suitabe for heating applications Material: Steel (St.37) c b z a Dimension a b c z [kg/piece] Carton Content Delivery Unit x 2,3-26,9 x 2, ,9 30 0, piece 10 piece x 2,9-33,7 x 2, ,7 34 0, piece 3 piece x 3,7-42,4 x 2, ,4 37 0,270 3 piece 3 piece x 4,6-48,3 x 2, ,3 47 0,410 3 piece x 5,8-60,3 x 2, ,3 45 0,550 3 piece x 6,8-76,1 x 2, ,1 45 0,840 3 piece x 8,2-88,9 x 3, ,9 45 1,150 3 piece x 10,0-114,3 x 3, ,3 40 1,550 3 piece x 11,4-139,7 x 3, ,7 59 3, x 12,7-139,7 x 3,6 4, x 14,6-168,3 x 4, ,3 64 6,000 * PN16 Flanges are available for these welding end adapters. 29

30 REHAU Ball Valve with Compression Sleeve Connection, SDR 11 REHAU ball valve with hand lever, with moulded ridged pipes on both sides in conjunction with RAUPEX and RAUTHERM pipes SDR 11 and compression sleeves SDR 11 Material: Body: Brass Seals: PTFE Ball: Chrome-plated brass Hand lever: Galvanised steel, plastic-coated Dimension A H L S [kg/piece] Carton Content Delivery Unit x 2,3-25 x 2, , x 2,9-32 x 2, , x 3,7-40 x 3, , x 4,6-50 x 4, , x 5,8-63 x 5, ,815 REHAU Ball Valve with Compression Sleeve Connection and Male Thread, SDR 11 REHAU ball valve with hand lever, with a moulded support ridges on one side and male thread on the other, for connecting to RAUPEX and RAUTHERM pipes SDR 11 and compression sleeves SDR 11. Material: Body: Brass Seals: PTFE Ball: Chrome-plated brass Hand lever: Galvanised steel, plastic-coated Dimension A H L S G [kg/piece] Carton Content Delivery Unit x 2,3 - R , x 2,9 - R ,466 30

31 REHAU Isolation Valves with Compression Sleeves SDR 11 REHAU isolation valve, pre-insulated. Pipe outer jacket made of HD-PE, black colour, with 6kt connection for spindle extending, along with 6kt key plus compression sleeve adapter, including compression sleeves for connection of RAUPEX and RAUTHERM SDR 11 pipes. Material: Shut off valve: Steel St 37 Insulation: PU- foam Ball Valves: chrome plated brass NB. reducing sockets will be required UNO Pipe Description [kg/piece] CartonContent Delivery Unit Isolation valves with connecting compression sleeves at both sides for RVT UNO 25 6, Isolation valves with connecting compression sleeves at both sides for RVT UNO 32 8, Isolation valves with connecting compression sleeves at both sides for RVT UNO 40 9, Isolation valves with connecting compression sleeves at both sides for RVT UNO 50 11, Isolation valves with connecting compression sleeves at both sides for RVT UNO 63 13, Isolation valves with connecting compression sleeves at both sides for RVT UNO 75 17, Isolation valves with connecting compression sleeves at both sides for RVT UNO 90 21, Isolation valves with connecting compression sleeves at both sides for RVT UNO , Isolation valves with connecting compression sleeves at both sides for RVT UNO , DUO Pipe Description [kg/piece] CartonContent Delivery Unit Isolation valves with connecting compression sleeves at both sides for RVT DUO 25 14, Isolation valves with connecting compression sleeves at both sides for RVT DUO 32 15, Isolation valves with connecting compression sleeves at both sides for RVT DUO 40 17, Isolation valves with connecting compression sleeves at both sides for RVT DUO 50 21, Isolation valves with connecting compression sleeves at both sides for RVT DUO 63 24,

32 REHAU Renewable Energy Solutions Follow REHAU Renewables Our verbal and written application engineering advice is based upon experience and the best of our knowledge. However it is to be regarded as non-binding information. Working conditions and use under these conditions for which the product was not intended and over which we have no influence exclude any claim resulting from our information. We recommend that a suitable check is made as to whther the REHAU product is suitable for the envisaged purpose. Application, use and processing of the products is carried out beyond the scope of our control and are therefore carried out exclusively at your own responsibility. If liability should still apply, then this is restricted, in the case of all damage, the value of the goods supplied by us and used by you. Our warranty applies to the consistent quality of our products as per our specification and in accordance with our general terms and conditions of delivery and payment. This document is protected by copyright. All rights based on this are reserved. No part of this publication may be translated, reproduced or transmitted in any form or by any similar means, electronic or mechanical, photocopying, recording or otherwise, or stored on a data retrieval system. UK & IRELAND SALES OFFICES London, REHAU Ltd, The Building Centre, 25 Store Street, London WC1E 7BT Slough, Units 5 J & K, Langley Business Centre, Station Road, Langley, Slough SL3 8DS Phone: Fax: Manchester, Brinell Drive, Irlam, Manchester M44 5BL Phone: Fax: Glasgow, Phoenix House, Phoenix Crescent, Strathclyde Business Park, Bellshill, North Lanarkshire ML4 3NJ Phone: Fax: Dublin, 9 St. Johns Court, Business Park, Swords Road, Santry, Dublin 9 Phone: (0) Fax: (0) EN