RAUGEO GROUND-SOURCE SYSTEMS INNOVATIVE HEATING & COOLING SOLUTIONS PARTS LIST /12 EN

Transcription

1 RAUGEO GROUND-SOURCE SYSTEMS INNOVATIVE HEATING & COOLING SOLUTIONS PARTS LIST /12 EN Valid from Subject to Technical Alterations Building Solutions Automotive Industry

2 CONTENTS Ground-source Probes and Accessories Ground-source Collectors and Accessories Energy Piles and Accessories RAUGEO Helix and Accessories RAUGEO Small Manifold Chamber RAUGEO Medium Manifold Chambers RAUGEO Large Manifold Chambers RAUGEO CLICK Manifold RAUGEO Accessories RAUGEO Compression Sleeve Technology Jointing Technique Electrofusion Coupler

3 1 GROUND-SOURCE PROBES & ACCESSORIES RAUGEO PE-Xa Probe Double-U-Probe Made of cross-linked polyethylene (RAU-PE-Xa) according to DIN 16892/93, UV-stabilised, natural colour, with a grey protective layer of RAU-PE. - High resistance against notches, grooves and point loads - Curved probe tip, therefore no joint in the ground - Additional protection of probe tip with GRP casing - Factory tested with certification - 10 year consequential loss warranty Operating temperature: -40 C to +95 C Delivery form: 1 Double-U-probe/pallet (4 coils) Includes screws for connecting the probe feet of double-u probe RAUGEO PE-Xa Probe 32 x 2,9 Probe tip diameter: 110 mm Art.-No. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] * x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, * Produced to order RAUGEO PE-Xa Probe 40 x 3,7 Probe tip diameter: 134 mm Art.-No. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * Produced to order 3

4 RAUGEO PE-RC Probes DUO Double-U loop probe made from PE100-RC to DIN 8074/75. TÜV certification according to PAS UV stabilised, colour - black (RAL 9004) - factory tested with certification, - welded according to DVS guidelines. - Produced according to SKZ HR 3.26 probe standard. Operating temperatures: -20 o C to +40 o C Max. operating pressure 16 bar (safety factor 1.25) Delivery form: Double-U probe on a pallet (4 coils) Includes screws for connecting the probe feet of double-u probe RAUGEO PE-RC Probes DUO 32 Duo probe, pipe dimension 32 x 3,0 Probe tip diameter: 96 mm Art.-No. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, RAUGEO PE-RC Probes DUO 40 Duo probe, pipe dimension 40 x 3,7 Probe tip diameter: 118 mm Art.-No. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3, x 3,

5 RAUGEO PE 100 DUO Probe Made of high density polyethylene (PE 100) according to DIN 8074/75, UV-stabilised, black colour (RAL 9004), --factory tested with certification --SKZ certification HR welded according to DVS guidelines --compact and robust probe tipe Operating temperature: -20 C bis +40 C Max. operating pressure: 16 bar (C = 1.25) Delivery form: 1 DUO-probe/palette (4 coils) includes screwes for connecting the prope feet of double-u probe RAUGEO PE 100 DUO Probe 32 Duo probe, pipe dimension 32 x 3,0 Probe tip diameter: 96 mm Art.-No. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] * x 3, x 3, x 3, x 3, x 3, x 3, x 3, * x 3, x 3, * x 3, * x 3, * x 3, * Produced to order RAUGEO PE 100 DUO Probe 40 Duo probe, pipe dimension 40 x 3,7 Probe tip diameter: 118 mm Art.-No. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] * x 3, * x 3, * x 3, * x 3, x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * x 3, * Produced to order 5

6 RAUGEO Backfilling Pipe PE SDR 11 For grouting of the borehole. Made of SDR 11 polythylene UV stabilised, Colour: black 2m additional pipe versus probe length. Please note: For short term over pressure loading, the backfilling pipe can only be used for one borehole. RAUGEO Backfilling Pipe 25 x 2,3 Art.-No. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, RAUGEO Backfilling Pipe 32 x 2,9 Art.-No. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2, x 2,

7 Weight for RAUGEO Probes For simple insertion of the probe into the borehole - For a PE Duo probe, use weight connection set 1 - For a PE Uno probe, use weight connection set 2 - For a PE-Xa probe, use PE-Xa adapter set - Connection of different probe weights with a weight extension set Material: Steel Art.-No. Length d Weight Delivery Unit [mm] [mm] [kg] [pc] approx , approx Insertion Aid for RAUGEO PE 100 Probes Used as a support rod for inserting probes into a borehole Add the insertion aid to the DUO probe with weight connector set 1 Material: Steel Art.-No Length Weight Delivery Unit [mm] [kg] [pc] approx ,75 1 Weight Connector Set 1 for RAUGEO PE DUO Probes For the installation of a probe weight (or insertion aid between the probe pipes) to a PE Duo probe. Material: Steel Art.-No. Application Weight Delivery Unit [kg] [pc] Probe weight or insertion aid 0, Short variant only for probe weights 0,2 1 Weight Connector Set 2 for RAUGEO PE UNO Probes For the installation of a probe weight to PE Uno probe. Material: Steel Art.-No. Weight Delivery Unit [kg] [pc] ,3 1 7

8 Weight Adapter Set for RAUGEO PE-Xa Probes For the installation of a probe weight to a PE-Xa probe. Material: Steel Art.-Nr. Weight Delivery Unit [kg] [pc] ,4 1 Weight Extension Set for RAUGEO PE Probe Weights For the modular connection of different probe weights. Material: Steel Art.-Nr. Weight Delivery Unit [kg] [pc] ,1 1 RAUGEO Y-Pipe For connection of both flow and return pipes at the borehole. The Y-pipe is made of PE 100 SDR 11 according to DIN To be connected using electrofusion welding. Art.-Nr. Dimension Length Delivery Unit [mm] [mm] [pc] RAUGEO Y-Pipe with Sockets For connection of both flow and return pipes at the borehole. The Y-pipe is made of PE 100 SDR 11 according to DIN To be connected using socket welding. Art.-Nr. Dimension Length Delivery Unit [mm] [mm] [pc]

9 RAUGEO Spacer To ensure a defined space between the probe pipes and also allow space for the backfillig pipe. This prevents the pipes being in direct contact with one another and therefore causing heat transmission.. Art.-Nr. d x s OD with pipe Middle Opening Delivery Unit [mm] [mm] [mm] [pc] x 2, x 3, RAUGEO Fill backfilling material Pre-mixed backfilling material for grouting vertical borehole installations. Frost resistance in accordance with DIN A. RAUGEO Fill red: Thermal conductivity approx. 2,0 W/mK, Suspension density 1,65 kg/dm 3, Compression resistance 28 d ca. 5,5 N/mm 2, Water permeability- < 2 x m/s RAUGEO Fill blue: Thermal conductivity ca. 1,2 W/mK, Suspension density 1,43 kg/dm 3, Compression resistance 28 d ca. 4 N/mm 2, Water permeability < 1 x 10-9 m/s RAUGEO Fill white: Thermal conductivity ca. 1,0 W/mK, Suspension density 1,47-1,73 kg/dm³ depending on water and adhesive content 1 x m/s, Compression resistance 28 d ca. 4 N/mm 2 Delivery form: 40 bags of 25 kg per pallet. Art.-Nr. Type Thermal Cond.- Application Spreading rate Weight Delivery Unit [W/mK] [to/m 3 ] [kg/pallet] * RAUGEO fill red 2,0 High thermal conductivity 1, Pallet + frost resistant * RAUGEO fill red 2,0 High thermal conductivity 1, Big Bag + frost resistant * RAUGEO fill red 2,0 High thermal conductivity 1,03 - Siloware + frost resistance * RAUGEO fill blue 1,2 frost resistant 0, Pallet * RAUGEO fill blue 1,2 frost resistant 0, Big Bag * RAUGEO fill blue 1,2 frost resistant 0,68 - Siloware * RAUGEO fill white 1,0 basic 0, Pallet * RAUGEO fill white 1,0 basic 0, Big Bag * RAUGEO fill white 1,0 basic 0,80 - Siloware * Delivery time on request 9

10 2 GROUND-SOURCE COLLECTORS AND ACCESSORIES RAUGEO collect PE-Xa SDR 11 Made of cross-linked polythylene (RAU-PE-Xa) according to DIN 16892/93, UV-stabilised, natural colour, with a grey protective layer of RAU-PE --Resistant to notches and grooves --Does not require sand bed for installation Operating temperature: -40 C to +95 C Art.-Nr. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] x 1, x 2, x 2, x 3, RAUGEO collect PE-Xa plus SDR 11 With the same properties of RAUGEO collect PE-Xa. Additional oxygen barrier according to DIN Operating temperature: -40 C to +95 Art.-Nr. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] x 1, x 2, x 2, x 3, Produced to order RAUGEO collect PE-RC SDR 11 Made of polyethylene resistant to crack (PE 100-RC) according to PAS 1075, UV-stabilised, Colour black, SDR 11 Operating temperature: -20 C to +40 C Art.-Nr. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] x 2, x 3, x 3,

11 RAUGEO collect PE 100 SDR 11 Made of PE-HD according to DIN 8074/75, UV stabilised, colour black. Please note: PE non-crosslinked pipes must be installed in a sandbed. Operating temperature: -20 C to +40 Art.-Nr. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] * x 2, * x 3, * x 3, * Delivery time on request RAUGEO collect Laying Aids To fix the collector pipe in the pipe trench or foundation pit. The laying aid can then be pulled out and reused. Art.-Nr. Length d Delivery Unit [mm] [mm] [pc]

12 3 ENERGY PILES AND ACCESSORIES Helix XXL PE-Xa Spiral collector for installation in foundation piles made from high pressure crosslinked polyethylene (RAU-PE-Xa) to DIN 16892/93, neutral colour, with separately connected return pipe --Resistant to nicks and stress cracking --Continuous flow and return pipe without jointing technique --Optimised pipe bend in the pile base Helix XXL 20 x 1,9 Art.-Nr. d x s Pile Length Pipe Length Weight OD Pipe Coil Return Length [mm] [m] [m] [kg/m] [m] [m] x 1, , x 1, , x 1, , x 1, , x 1, , x 1, , x 1, , x 1, , x 1, , x 1, ,79 18 Helix XXL 25 x 2,3 Art.-Nr. d x s Pfahllänge Rohrlänge Weight AD Rohrbund Länge Rücklauf [mm] [m] [m] [kg/m] [m] [m] x 2, , x 2, , x 2, , x 2, , x 2, , x 2, , x 2, , x 2, , x 2, , x 2, ,

13 RAUGEO collect PE-Xa Energy Piles Made of cross-linked polyethylene (RAU-PE-Xa) according to DIN 16892/93, UV-stabilised, natural colour, with a grey protective layer of RAU-PE --Resistant to notches and grooves --Particularly small bending radius Operating temperature: -40 C to +95 C Art.-Nr. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] x 1, x 2, RAUGEO collect PE-Xa plus Energy Piles With the same properties of RAUGEO collect PE-Xa. Additional oxygen barrier according to DIN Operating temperature: -40 C to +95 C Art.-Nr. Delivery Length d x s Weight Pipe Volume [m] [mm] [kg] [l] x 1, x 2, Produced to order 13

14 EP Grid Tie To attach the RAUGEO pipework to the energy pile Colour: black Art.-Nr. Weight Box Quantity Delivery Unit [kg/100 pcs] [pc] ,15 100/ Twisting Tool Allows fast and comfortable twisting of the EP grid tie. Material: Steel Colour: black Art.-Nr. Weight Box Quantity Delivery Unit [kg/pc] [pc] , REHAU Cable Ties Polyamide cable ties to attach pipework to the pile. Colour: natural Art.-Nr. Length Box Quantity Delivery Unit [mm] [pc]

15 REHAU HDPE Casing Pipe To protect the upper area of enrgy pile pipework during installation. Corrugated outer layer of PE-HD, smooth inner layer of PE-HD. Impact resistant up to -25 o C. Easy handling and installation due to low weight and high flexibility. Simple trimming with no special tools. Art.-Nr. OD ID Delivery Form Length Bending Radius approx. Weight [mm] [mm] [m] [m at 20 C] [kg/m] * Coil 50 0,35 0, * Coil 50 0,35 0, * Coil 50 0,46 0, * Coil 50 0,46 0, * Coil 50 0,46 0, * Coil 50 0,46 0, * Coil 50 0,50 0, * Coil 50 0,50 0, * Coil 50 0,65 1, * Coil 50 0,70 1,260 * Delivery time on request 15

16 4 RAUGEO HELIX AND ACCESSORIES RAUGEO Helix Probe PE-Xa Made of cross-linked polyethylene (RAU-PE-Xa) according to DIN 16892/93, UV-stabilised, natural colour (milky white), curved probe tip, pipe spacer grey/magenta. Operating temperature -40 C to +95 C Extendable from 1.1m (transportation / storage) to 3m (installation length). Diameter approx. 36 cm. Art.-Nr. d x s Pipe Length Weight Delivery Unit Description [mm] [m] [kg/pc] [pc/wooden crate] x 2,3 42 8, m return (red), 0,2 m flow (blue) * 25 x 2,3 42 9, m return (red), 3 m flow (blue) * 25 x 2,3 42 8,1 15 compression sleeve coupler end * Delivery time on request RAUGEO Header Pipe blue/red Made of high pressure cross-linked polyethylene (RAU-PE-Xa) according to DIN 16892/3, UV stabilised, natural colour with either a blue or red protective layer of RAU-PE. Used as connecting pipe for RAUGEO Helix --Resistant against notches and grooves --Can be laid without a sand bed Operating temperature: -40 C to +95 C Art.-Nr. Delivery Length d x s Weight Pipe Volume Colour [m] [mm] [kg] [l] * x 2, Blue * x 2, Red REHAU Pipe Bend Former 90 For bending the RAUGEO pipe 25 x 2,3 Material: Polyamide Colour: black Art.-Nr. Pipe Diameter Weight Packing Qty [d] [kg/pc] [pc] ,

17 5 RAUGEO SMALL MANIFOLD CHAMBER Available in quarter RAUGEO Small Manifold Chamber - Empty Chamber Shell 1-piece ground-source manifold chamber made from polyethylene (orange) to hold a RAUGEO CLICK manifold consisting of: --Chamber body --Chamber cover to EN124 A15 (MPA + TÜV tested) consisting of cover, can be walked on up to 200 kg, childproof due to inlaid seal and 2-way screw connection Dimensions installation size in mm: 800 x 600 x 463 Suitable for connecting pipe d20-d50 Art.-Nr. Weight Delivery Unit [kg] RAUGEO Pipe Duct Set Set consisting of a duct for the brine circuit on the inside of the chamber of the RAUGEO small manifold chamber or a duct for the main pipe on the inside of the chamber. Art.-Nr. For Pipe Dimension Weight Delivery Unit [d] [kg/set] [Set] d20 0, d25 0, d32 0, d40 0, d50 0,2 1 RAUGEO Brass End Cap Brass cap to seal the dezincification-resistant brass (EZB) 2 male thread of the manifold header. Art.-Nr. Description Delivery Unit RAUGEO Brass cap 2 1 [pc] 17

18 RAUGEO Small Manifold Chamber - Pre-fabricated Design Pre-assembled ground-source manifold chamber made from polyethylene (orange) to join the brine circuits, consisting of: --RAUGEO small manifold chamber empty chamber with pre-drilled ducts for the brine circuits and header pipes in the required amount and dimension with seals fitted in each case --Pre-fabricated and pressure-tested RAUGEO CLICK manifold (flow and return) in the size required in each case --RAUGEO CLICK push fitting sets in the required amount and dimension --Dimensions installation size 800 x 600 x 463 in mm: Connection dimension 25 x 2,3, flow range l/min* Art.-Nr. No. of Main connecting Flowmeter Manifold Weight Delivery Unit connections pipe [l/min] combination [kg/pc] [pc] d x 3-port 24, d x 4-port 23, d x 4-port 22, d x 5-port 25, d x 5-port 24,6 1 * Delivery time on request Connection dimension 32 x 2,9, flow range l/min* Art.-Nr. No. of Main connecting Flowmeter Manifold Weight Delivery Unit port connections pipe [l/min] combination [kg/pc] [pc] d x 2-port 22, d x 2-port 22, d x 3-port 23, d x 3-port 23, d x 4-port 24, d x 4-port 24, d x 5-port 25, d x 5-port 25,7 1 * Delivery time on request Connection dimension 40 x 3,7, flow range l/min* Art.-Nr. No. of Main connecting Flowmeter Manifold Weight Delivery Unit connections pipe [l/min] combination [kg/pc] [pc] d x 2-port 22, d x 2-port 22, d x 3-port 23, d x 3-port 23, d x 4-port 24, d x 4-port 24, d x 5-port 25, d x 5-port 25,7 1 * Delivery time on request 18

19 6 RAUGEO MEDIUM MANIFOLD CHAMBERS RAUGEO Medium Manifold Chamber Complete pre-fabricated manifold chamber, made of polyethylene, for connection of brine circuits. Pressure tested in factory. Walkable cover up to 200kg. Length x width x height: 100 x 80 x 115cm. 63 x 5.8mm manifold header pipe, made of PE 100. Welded watertight pipe stubs are 32 x 2.9mm or 40 x 3.7mm, spaced 100mm apart. 1 ball valve for ventilation. Available without flowmeters, with 1 ¼ polymer ball valves on every circuit. Available with flowmeters, with 1 ¼ polymer ball valves on all flow circuits and flowmeters on all return circuits. RAUGEO Medium Manifold Chamber with Flowmeter* Art.-Nr. Dimensions of No. of Flowmeter Weight Connections Connections [kg/pc] x 2,9 2 with 50, x 2,9 3 with 52, x 2,9 4 with 54, x 2,9 5 with 56, x 2,9 6 with 58, x 2,9 7 with 60, x 2,9 8 with 62, x 3,7 2 with 51, x 3,7 3 with 53, x 3,7 4 with 54, x 3,7 5 with 56, x 3,7 6 with 58, x 3,7 7 with 60, x 3,7 8 with 62,8 * Delivery time on request RAUGEO Medium Manifold Chamber Accessories Art.-Nr. Description Weight [kg/pc] Concrete ring for Buoyancy Chamber Shaft Extension 600 x 400 x 6 (d x h x s) 7 19

20 7 RAUGEO LARGE MANIFOLD CHAMBERS RAUGEO Large Manifold Chamber System The combination of the RAUGEO large manifold chamber with the RAUGEO CLICK manifold system provides unprecedented flexibility. With only a small number of articles any manifold chamber can be assembled quickly and easily. Parts list for RAUGEO manifold chamber modular system a) In combination with pre-fabricated RAUGEO CLICK manifolds No. of connections Empty Chamber Brine circuit Header pipe RAUGEO CLICK RAUGEO CLICK seal set seal set manifold push fitting set per circuit/port per circuit/port per circuit/port per circuit/port b) In combination with the RAUGEO CLICK modular system No. of connections Empty Brine circuit Header pipe RAUGEO CLICK RAUGEO CLICK RAUGEO CLICK Chamber seal set seal set Basis-Set Extension set push fitting set per circuit/port per circuit/port minus 1 1 per circuit/port per circuit/port per circuit/port minus 1 1 per circuit/port See chapter 9 RAUGEO CLICK manifold for further details RAUGEO Large Manifold Chamber - Empty Chamber Shell 2-piece ground-source manifold chamber made from polyethylene (orange) to hold a RAUGEO CLICK manifold consisting of --Base element with carrying handles on both sides and eye hooks for --easy transport and handling --Chamber cone, can be screwed to the base element so that it is watertight --Chamber cover to ISO / DIN 1989 (MPA + TÜV tested) consisting of cover, frame and seal, can be walked on up to 200kg, childproof and surface water resistant due to inlaid seal and 4-way screw connection Dimensions installation size: L 1300 x W 980 x H 1340 Dimensions delivery format: L 1300 x W 980 x H 660 (cone turned upside down in the base element) Additionally includes: --Screw material for the watertight connection of the base element and cone --Sealing tape for sealing between the base element and cone --Adjustment for the manifold mounting support Art.-Nr. Weight Delivery Unit [kg/pc] [pc] 20

21 RAUGEO Pipe Duct Set Set consisting of 2 ducts for feeding the brine circuits through to the inside of the chamber of the RAUGEO large manifold chamber Art.-Nr. For Weight Delivery Unit pipe dimension [kg/set] [Set] d20 0, d25 0, d32 0, d40 0, d50 0,2 1 RAUGEO Header Pipe Duct Set Set consisting of 2 ducts for feeding the header pipes through to the inside of the chamber of the RAUGEO large manifold chamber Art.-Nr. For Weight Delivery Unit pipe dimension [kg/set] [Set] d50 0, d63 0, d75 0,3 1 RAUGEO Lubricant Lubricant for use on all connections of the RAUGEO CLICK large manifold and manifold chamber. Art.-Nr. Weight Delivery Unit [kg/pc] ,1 1 [pc] RAUGEO Levelling Set Set consisting of 2 levels made from PE each for an additional support point for each compression sleeve manifold in the chamber base. Art.-Nr. Weight Delivery Unit [kg/set] ,9 1 [Set] RAUGEO Screw Set Spare parts set consisting of 5 screws for connecting the chamber cone to the base element. Art.-Nr. Weight Delivery Unit [kg/set] ,2 1 [Set] RAUGEO Sealing Strip Replacement for the seal between the chamber cone and base element. Art.-Nr. Weight Delivery Unit [kg/pc] ,1 1 [pc] 21

22 RAUGEO Large Manifold Chamber - Pre-fabricated Design RAUGEO Large Manifold Chamber Pre-assembled ground-source manifold chamber made from polyethylene (orange) to join the brine circuits, consisting of --RAUGEO XL manifold chamber empty chamber with pre-drilled ducts for the brine circuits and header pipes in the required amount and dimension with seals fitted in each case --Pre-fabricated and pressure-tested RAUGEO CLICK (flow and return) in the appropriate size required --RAUGEO CLICK connection sets in the required number and dimension Dimensions installation size and delivery format: L 1300 x W 980 x H 1300 Also includes: --Screw material for the watertight connection of the base element and cone --Sealing tape for sealing between the base element and cone --Adjustment for the manifold mounting support Pipe dimension 25 x 2,3 flowmeter range l/min* Article No. No. of Flow rate Manifold- Weight Delivery Unit connections [l/min] combination [kg/pc] [pc] x 2-port 70, x 3-port 71, x 4-port 72, x 5-port 74, x 6-port 75, x 7-port 77, x 8-port 78, x 9-port 80, x 5-port 81, x 10-port 84, x 5 port + 1 x 6-port 86, x 6-port 87, x 6-port + 1 x 7-port 88, x 7-port 90, x 7-port + 1 x 8-port 91, x 8-port 93, x 8-port + 1 x 9-port 94, x 9-port 96, x 9-port + 1 x 10-port 97, x 10-port 98,9 1 * Delivery time on request 22

23 Pipe dimension 32 x 2,9, flowmeter range l/min* Article No. No. of Flow rate Manifold- Weight Delivery Unit connections [l/min] combination [kg/pc] [pc] x 2-port 70, x 3-port 71, x 4-port 73, x 5-port 74, x 6-port 76, x 7-port 77, x 8-port 79, x 9-port 80, x 5-port 82, x 10-port 85, x 5 port + 1 x 6-port 86, x 6-port 88, x 6-port + 1 x 7-port 89, x 7-port 91, x 7-port + 1 x 8-port 92, x 8-port 94, x 8-port + 1 x 9-port 95, x 9-port 97, x 9-port + 1 x 10-port 98, x 10-port 100,0 1 * Delivery time on request Pipe dimension 40 x 3,7, flowmeter range l/min* Article No. No. of Flow rate Manifold- Weight Delivery Unit connections [l/min] combination [kg/pc] [pc] x 2-port 70, x 3-port 71, x 4-port 73, x 5-port 74, x 6-port 76, x 7-port 77, x 8-port 79, x 9-port 80, x 5-port 82, x 10-port 85, x 5 port + 1 x 6-port 86, x 6-port 88, x 6-port + 1 x 7-port 89, x 7-port 91, x 7-port + 1 x 8-port 92, x 8-port 94, x 8-port + 1 x 9-port 95, x 9-port 97, x 9-port + 1 x 10-port 98, x 10-port 100,1 1 * Delivery time on request 23

24 8 RAUGEO CLICK MANIFOLD RAUGEO CLICK manifold Pre-fabricated and pressure-tested modular manifold (flow and return) made from glass fibre-reinforced, heat and cold-resistant polymer with a high level of insulation (heat conductivity 0.30 W/mK). Internal diameter of the compression sleeve manifold 2½ (64mm). Every flow module with integrated shut-off device (ball valve ID 25). Every return module with integrated shut-off device (ball valve ID 25) and polymer flowmeter (ID 25). Every connecting module with 2 (50 mm) dezincification-resistant (EZB) male thread for connecting the header pipe as well as 3 x ½ (12 mm) lateral connections with female thread for fitting extras. Manifold outlets with bayonet connection for RAUGEO CLICK push fitting for connecting the brine circuits. Approved to max. test pressure 10 bar, max. operating pressure 6 bar. Also includes: 6 dummy stoppers (pre-assembled), 2 x filling and draining valves ½ (12 mm), 2 x bleed valve ½ (12 mm), wall bracket set for the required number of fixing points.. Pre-assembled manifold with flowmeter Litres/min Article No. No. of Flow rate Manifold Length Weight Delivery Unit connections [Litres/min] [mm] [kg] [pc] , , , , , , , , , , ,5 1 24

25 RAUGEO CLICK Manifold Modular System The modular system for manifold assembly consists essentially of three sets: the basic set that is required for every manifold, an expansion set to add an additional brine circuit to each manifold, as well as a push fitting set to connect the brine circuits. In combination with the other sets, e.g. additional wall brackets or ball valves to connect the main pipes, you can fit any manifold variant you like yourself within a short time. This allows, even with low stock, the highest flexibility for each construction site requirement. You can therefore fit any manifold variant you like yourself within a short time. Parts list for RAUGEO CLICK modular system Accessories Modular System No. of Basic-Set Expansion- Wall Bracket- Push Fitting-Set in Dimension... circuits Set Set d20 d25 d32 d40 d l/min l/min l/min circuits circuits circuits circuits circuits circuits circuits circuits circuits circuits circuits No. of Ball Valve-Set Adapter Set for connecting the main pipe in Dimension Manometer Reducing circuits d40 d50 d63 d75 axial radial fitting Mat.-Nr Quantity per Manifold Articles can only be assembled in combination! Articles can only be assembled in combination! 25

26 RAUGEO CLICK Basic Set Basic set for the assembly on the construction site of a modular manifold made from glass fibre-reinforced, heat and cold-resistant polymer with a high level of insulation (heat conductivity 0.30 W/mK), internal diameter of the compression sleeve manifold 2½ (64 mm). Comprising 2 connecting and 2 end modules (for the flow and return respectively). Every connecting module with 2 (50 mm) dezincification-resistant (EZB) male thread for connecting the header pipe as well as 3 x ½ (12 mm) lateral connections with female thread for fitting extras. End module (flow) with integrated shut-off device (ball valve ID 25). End module (return) with integrated shut-off device (ball valve ID 25) and polymer flowmeter (ID 25). Manifold outlets with bayonet connection for RAUGEO CLICK push fitting for connecting the brine circuits. Approved to max. test pressure 10 bar, max. operating pressure 6 bar Also includes: 2 dummy stoppers, 2 filling and draining valves ½ (12 mm), 2 bleed valve ½ (12 mm), 1 wall bracket for 2 fixing points. Art.-Nr. Flow Rate Weight Delivery Unit Packaging Unit [Liter/min] [kg/set] [Set] [Sets/Karton] , RAUGEO CLICK Expansion Set Expansion set for 1 brine circuit for the assembly on the construction site of a modular manifold made from glass fibre-reinforced, heat and cold-resistant polymer with a high level of insulation (heat conductivity 0.30 W/mK), internal diameter of the compression sleeve manifold 2½ (64 mm). Comprising 2 modules (flow and return) for connecting 1 brine circuit. Flow module with integrated shut-off device (ball valve ID 25). Return module with integrated shut-off device (ball valve ID 25) and polymer flowmeter (ID 25). Manifold outlets with bayonet connection for RAUGEO CLICK push fitting for connecting the brine circuit. Approved to max. test pressure 10 bar, max. operating pressure 6 bar. Art.-Nr. Flow Rate Weight Delivery Unit Packaging Unit [Liter/min] [kg/set] [Set] [Sets/Karton] ,

27 RAUGEO CLICK Push Fitting Set Push fitting set for RAUGEO CLICK manifold for the connection of 1 brine circuit. Comprising 2 polymer transparent push connections with insertion depth mark for PE and PE-X pipes. RAUGEO CLICK Push Fitting Set Art.-Nr. Pipe Dimension Weight Delivery Unit Packaging Unit [kg/set] [Set] [Sets/Karton] d20 0, d25 0, d32 0, d40 0, d50 0, RAUGEO CLICK Tool Set Tool set for removing plastic pipes from RAUGEO CLICK push fittings Supply: 1 Tool Set per dimension Art.-Nr. Pipe Dimension Weight Delivery Unit [kg/set] [Set] d20 0, d25 0, d32 0, d40 0, d50 0,

28 RAUGEO Pipe Trimmer Universal tool for trimming PE and PEX pipes of the dimensions d20-d50 before fitting the pipe in RAUGEO CLICK push fittings. Art.-Nr. Weight Delivery Unit [kg] [pc] ,4 1 RAUGEO CLICK Wall Bracket Set Polymer wall bracket for the offset assembly of a RAUGEO CLICK manifold (flow and return) for 2 fixing points. Scope of supply: 2 wall brackets for the flow and return respectively. Fixing materials (screws and dowels) included. Art.-Nr. Weight/Set Delivery Unit Packaging Unit [kg] [Set] [Sets/box] , RAUGEO CLICK Thermomanometer Combination of thermometer and manometer for measuring the temperature and pressure in the flow and return of a RAUGEO CLICK manifold with rear or lateral connection. Measurement range 0 6 bar and 20 C to +60 C. Scope of supply includes ½ (12 mm) Service Automatic valve. The reducing fitting R ⅜ Rp ½ is required to fit the manifold. Art.-Nr. Connection Weight Delivery Unit [kg/pc] [pc] Rear connection (axial) 0, Lateral connection (radial) 0, Reducing fitting 0,

29 RAUGEO CLICK Metal Ball Valve Set Set consisting of 2 ball valves with 2 connection threads for shutting off the header pipes from the manifold. Material: Brass nickel-plated Supply: 2 Ball Valves per Set Art.-Nr. Weight Delivery Unit [kg/set] [Set] ,6 1 RAUGEO CLICK Adapter Set for Metal Ball Valve Set Adapter set for connecting the header pipes to the RAUGEO CLICK manifold Material: Dezincification-resistant brass Supply: 2 adapters per set Art.-Nr. For connecting the pipe dimension Weight Delivery Unit [kg/set] [Set] d40 1, d50 1, d63 1, d75 3,4 1 RAUGEO Lubricant Lubricant for use with all connections of RAUGEO CLICK manifolds and large manifold chambers. Art.-Nr. Weight Delivery Unit [kg/pc] ,1 1 [pc] 29

30 9 RAUGEO ACCESSORIES RAUGEO PE-Xa Header Pipes SDR 11 Made of high pressure cross-linked polyethylene (PE-Xa), according to DIN 16892/93. UV stabilised. Colour - natural with a grey protective layer of RAU- PE. Delivered in coils. - Resistant to notches and grooves - No sand bed needed for installations Operating temperatures: -40 o C to +95 o C Art.-Nr. d x s Delivery Unit Weight [mm] [m] [kg/m] x 4,6 30 0, x 4,6 50 0, x 4, , x 5,8 30 1, x 5,8 50 1, x 5, , * 75 x 6,8 30 1, * 75 x 6,8 50 1, * 75 x 6, ,48 *Delivery time on request RAUGEO PE-RC Header Pipes SDR 11 Made of polyethylene resistant to crack (PE100-RC) to PAS UV stabilised. Colour - black. Delivered in coils. Operating temperatures: -20 o C to +40 o C Art.-Nr. d x s Delivery Length Weight [mm] [m] [kg/m] x 4,6 30 0, x 4,6 50 0, x 4, , x 5,8 30 1, x 5,8 50 1, x 5, , x 6,8 30 1, x 6,8 50 1, x 6, ,48 30

31 RAUGEO PE100 Header Pipes SDR 11 Made of polyethylene according to DIN 8074/75. UV stabilised. Colour - black. Delivered in coils. Note: Non-crosslinked PE must be installed in sand beds! Operating temperatures: -20 o C to +40 o C Art.-Nr. d x s Delivery Length Weight [mm] [m] [kg/m] x 3,7 30 0, x 3,7 50 0, x 3, , x 4,6 30 0, x 4,6 50 0, x 4, , x 5,8 30 1, x 5,8 50 1, x 5, , x 6,8 30 1, x 6,8 50 1, x 6, ,48 RAUGEO Protective Tape For the protection of RAUGEO brass fittings in the ground. Art.-Nr. Length Width Delivery Unit [m] [mm] [pc]

32 10 RAUGEO COMPRESSION SLEEVE TECHNOLOGY For RAUGEO Probes, Collect, Helix and Energy piles with PE-Xa and PE-Xa plus Brass fittings installed in the soil must be wrapped with shrink tape. All articles from this chapter are available in larger dimensions on request. REHAU EVERLOC TM Compression Sleeve, SDR 11 For sliding on REHAU EVERLOC TM compression sleeve fitting SDR 11 in conjunction with RAUGEO pipes SDR 11. Material: CuZn39Pb3 Art.-Nr. Dimension a b Weight Box Quanitity Delivery Unit [mm] [mm] [mm] [kg/pc] [pcs] [pcs] x 1, , x 2, , x 2, , x 3, , x 4, , x 5, , REHAU Straight Coupler, SDR 11 REHAU EVERLOC TM compression fitting with moulded support ridges for use with RAUGEO pipes SDR 11 and REHAU EVERLOC TM compression sleeves SDR 11. z a Art.-Nr. Dimension a z Weight Box Quantity Delivery Unit [mm] [mm] [mm] [kg/pc] [pcs] [pcs] x 1, , x 2, , x 2, , x 3, , x 4, , x 5, ,

33 REHAU Reducing Coupler, SDR 11 REHAU EVERLOC TM compression fitting with moulded support ridges for use with RAUGEO pipes SDR 11 and REHAU EVERLOC TM compression sleeves SDR 11. Material: Brass z a Art.-Nr. Dimension a z Weight Box Quantity Delivery Unit [mm] [mm] [mm] [kg/pc] [pcs] [pcs] x 2,3-20 x 1, , x 2,9-25 x 2, , x 3,7-32 x 2, , x 3,7-20 x 1, , x 4,6-40 x 3, , x 5,8-50 x 4, ,

34 REHAU T-piece, SDR 11 REHAU EVERLOC TM compression fitting with moulded support ridges for use with RAUGEO Pipe SDR 11 and REHAU EVERLOC TM compression sleeves SDR 11. Art.-Nr. Size Dimension mm Weight Box Quantity Delivery Unit a b c z 1 z 2 z 3 [kg/pc.] Equal Tee x 1, , pcs. 10 pcs x 2, , pcs. 10 pcs x 2, , pcs. 3 pcs x 3, , pcs. 1 pc x 4, , pcs. 1 pc x 5, , pcs. 1 pc. Tee one end and branch reduced , pcs. 10 pcs , pcs. 3 pcs ,580 1 pcs. 1 pc ,820 1 pc. 1 pc ,720 1 pc. 1 pc ,200 1 pc. 1 pc ,400 1pc. 1 pc ,600 1 pc. 1 pc ,600 1 pc. 1 pc. Tee branch reduced , pcs. 10 pcs , pcs. 5 pcs , pcs. 3 pcs ,580 1 pc 1 pc ,670 1 pc 1 pc ,700 1 pc 1 pc ,810 1 pc 1 pc ,830 1 pc 1 pc ,820 1 pc 1 pc ,900 1 pc 1 pc ,200 1 pc. 1 pc ,200 1 pcs 1 pc ,700 1 pc. 1 pc ,900 1 pc. 1 pc. Outlet enlarged , pcs. 10 pcs. Tee one end reduced , pcs. 10 pcs , pcs. 3 pcs. 34

35 REHAU Male Adapter with Male Thread, SDR 11 REHAU EVERLOC TM compression sleeve with moulded support ridges for use with RAUGEO pipes SDR 11 and REHAU EVERLOC TM compression sleeves SDR 11. z a Art.-Nr. Size Dimension mm SW Weight Box Quantity Delivery Unit a z [kg/pc] x 1,9 - R ½ /L , pcs. 10 pcs x 1,9 - R ¾ /L , pcs. 10 pcs x 2,3 - R ¾ , pcs. 10 pcs x 2,3 - R 1 /L , pcs. 10 pcs x 2,9 - R 1 /L , pcs. 3 pcs x 3,7 - R 1 ¼ , pcs. 5 pcs x 4,6 - R 1 ¼ ,480 1 pc. 1 pc x 4,6 - R 1 ½ ,510 1 pc. 1 pc x 5,8 - R ,800 1 pc. 1 pc. REHAU Elbow 90, SDR 11 REHAU EVERLOC TM compression sleeve with moulded support ridges for use with RAUGEO pipes SDR 11 and REHAU EVERLOC TM compression sleeves SDR 11. z a z a Art.-Nr. Dimension a z Weight Box Quantity Delivery Unit [mm] [mm] [kg/pc] [pcs] [pcs] x 1, , x 2, , x 2, , x 3, , x 4, , x 5, ,

36 11 JOINTING TECHNIQUE ELECTROFUSION COUPLER For RAUGEO Probe, Collect, Helix and Energy Pile made from PE 100, PE-100-RC and PE-Xa All articles from this section are available in larger dimensions on request. Material: PE 100, PN 16 Safety factor 1,25 Medium: Air and water Note: Not suitable for RAUGEO PE-Xa Plus pipes! Temperature Pressure Service Life 20 C 16,0 bar 50 years 30 C 12,8 bar 50 years 40 C 9,6 bar 50 years 50 C 6,4 bar 15 years REHAU Electrofusion Coupler (ESM) REHAU electrofusion fitting with internal welding wires for the welding of PE- Xa pipes and pipes made from PE 63, PE 80, PE 100. Material: PE 100, black, UV stabilised Pressure level: PN 16 Not suitable for pipes with EVAL barrier layer Art.-Nr. Dimension L D A Z Weight Packaging Unit [mm] [mm] [mm] [mm] [kg/pc] [pc] , , , , ,240 1 REHAU ESM-T-piece, Uniform REHAU electrofusion fitting with internal welding wires for the welding of PE- Xa pipes and pipes made from PE 63, PE 80, PE 100. A REHAU electrofusion coupler in the relevant dimension is also necessary for the outlet.. Material: PE 100, black, UV stabilised Pressure level: PN 16 Not suitable for pipes with EVAL barrier layer. Art.-Nr. Dimension mm L L 1 D H Weight Packaging Unit d - d1 - d [mm] [mm] [mm] [mm] [kg/pc] [pc] , , , , ,

37 REHAU ESM Reducer Sleeve REHAU electrofusion fitting with internal welding wires for the welding of PE- Xa pipes and pipes made from PE 63, PE 80, PE 100. Material: PE 100, black, UV stabilised Pressure level: PN 16 Not suitable for pipes with EVAL barrier layer Art.-Nr. Dimension L A B Z Weight Packaging Unit d1 - d2 [mm] [mm] [mm] [mm] [kg/pc] [pc] , , , , , , , , ,224 1 REHAU ESM 45 o Elbow REHAU electrofusion fitting with internal welding wires for the welding of PE- Xa pipes and pipes made from PE 63, PE 80, PE 100. Material: PE 100, black, UV stabilised Pressure level: PN 16 Not suitable for pipes with EVAL barrier layer Art.-Nr. Dimension L L 1 D Weight Packaging Unit [mm] [mm] [mm] [kg/pc] [pc] , , , ,275 1 REHAU ESM 90 Elbow REHAU electrofusion fitting with internal welding wires for the welding of PE- Xa pipes and pipes made from PE 63, PE 80, PE 100. Material: PE 100, black, UV stabilised Pressure level: PN 16 Not suitable for pipes with EVAL barrier layer Art.-Nr. Dimension L L 1 D Weight Packaging Unit [mm] [mm] [mm] [kg/pc] [pc] , , , , ,

38 REHAU ESM Transition Socket With Male Thread (Brass Male Thread) REHAU electrofusion fitting with internal welding wires for the welding of PE- Xa pipes and pipes made from PE 63, PE 80, PE 100. Material: PE 100, black, UV stabilised Pressure level: PN 16 Not suitable for pipes with EVAL barrier layer Art.-Nr. Dimension L L 1 L 2 D 2 Width Across Flat Weight Packaging Unit [mm] [mm] [mm] [mm] [mm] [kg/pc] [pc] R¾ , R , R1 ¼ , R1 ½ , R ,

39 39

40 RAUGEO GROUND SOURCE SOLUTIONS UNIVERSAL APPLICATION Ground-source probes RAUGEO PE-Xa probe: Highest reliability for boreholes upto 200m deep RAUGEO PE100/-RC probe: Latest generation of PE-100 RC vertical probes RAUGEO HPR high pressure deep probe: Extracting ground-source heat from depths of up to 800 m RAUGEO coaxial probes: Using radial drilling to extract ground-source energy. Spiral probes RAUGEO Helix PE-Xa: The compact method of using ground-source heat at depths of 4-5 m. Ground-source collectors RAUGEO collect PE-Xa: Highest quality horizontal collectors for depths of 1-2 m. RAUGEO collect PE100/-RC: Latest generation of PE100 RC horizontal collector for depths of 1-2m. Energy piles RAUGEO collect PE-Xa: Extracting ground-source energy from foundation piles at depths up to 20m. Follow REHAU Renewables Our verbal and written advice relating to technical applications is based on experience and is to the best of our knowledge correct but is given without obligation. The use of REHAU products in conditions that are beyond our control or for applications other than those specified releases us from any obligations in regard to claims made in respect of the products. We recommend that the suitability of any REHAU product for the intended application should be checked. Utilization and processing of our products are beyond our control and are therefore exclusively your responsibility. In the event that a liability is nevertheless considered, then this will be based exclusively on our conditions of sale, which can be seen under This also applies to any warranty claims, whereby the warranty assumes consistent quality of our products in accordance with our specification. This document is protected by copyright. The rights conferred therein, particularly those relating to translation, reprinting, extraction of figures, electronic transmission, reproduction by photomechanical or similar means and storage on data processing equipment, remain reserved. UK & IRELAND SALES OFFICES London, REHAU Ltd, The Building Centre, 25 Store Street, London WC1E 7BT Slough, Units 5 J & K, Langley Business Centre, Station Road, Langley, Slough SL3 8DS Phone: Fax: Manchester, Brinell Drive, Irlam, Manchester M44 5BL Phone: Fax: Glasgow, Phoenix House, Phoenix Crescent, Strathclyde Business Park, Bellshill, North Lanarkshire ML4 3NJ Phone: Fax: Dublin, 9 St. Johns Court, Business Park, Swords Road, Santry, Dublin 9 Phone: (0) Fax: (0) /12 EN