SYSTEM KAN-therm. Underfloor heating. Comfort and efficiency TECHNOLOGY OF SUCCESS ISO 9001

Transcription

1 SYSTEM KAN-therm Underfloor heating Comfort and efficiency TECHNOLOGY OF SUCCESS ISO 9001

2 The underfloor heating of System KAN-therm - pipes and pipe accessories KAN-therm pipe PE-RT with EVOH layer for underfloor heating, class 4/6 bars, T max 70 Size Pipe length Code Price EUR/m Group in coil/on palette Ø / OP 0,81 C Ø / OP 600M 0,81 C Ø / OP 0,87 C Ø / OP 600M 0,87 C KAN-therm pipe PE-Xc acc. to DIN 16892/93 with EVOH layer acc. to DIN 4726 Size Pipe length Code Price EUR/m Group in coil/on palette Ø / ,15 C Ø / ,28 C Ø / ,40 C Ø / ,48 C * Ø /3000 K ,83 C Ø25 3,5 50/ ,18 C Operating parameters T work 80 C (Tmax - maximum 90 C, T mal - malfunction 100 C), pressure 6 bar, for central heating and underfloor heating systems. KAN-therm pipe PE-RT with EVOH layer acc. to DIN 4726 Size Pipe length Code Price EUR/m Group in coil/on palette Ø / ,92 C Ø / ,01 C Ø / ,03 C Ø / ,09 C * Ø20 2*** 200/3000 K ,46 C Ø25 3,5 50/ ,69 C Operating parameters T work 80 C (Tmax - maximum 90 C, T mal - malfunction 100 C), pressure 6 bar, for central heating and underfloor heating systems. *** for underfloor heating installations up to 6 bar (T work =60 C) and central heating installations up to 4 bar (T work =80 C) KAN-therm multilayer pipe PE-RT/Al/PE-RT Multi Universal (PN12 series) designed for central heating, hot and cold water systems as well as for floor heating systems; operating pressure max. 10 bar Size Pipe length Code Price EUR/m Group in coil/on palette Ø / ,44 B Ø / ,46 B Ø / M 1,46 C Ø / ,57 B Operating parameters T work 90 C (T max - maximum 95 C, T mal - malfunction 100 C), pressure 10 bar, for central heating and underfloor heating systems

3 The underfloor heating of System KAN-therm - pipes and pipe accessories KAN-therm universal pipe de-coiler Code Price EUR/pcs Group K ,57 K KAN-therm coupling Ø / ,68 A Ø / ,71 A Ø / ,76 A Ø / ,04 A * Ø /100 K ,05 A Ø25 3,5 5/ ,77 A The coupling is used for repair purposes (pipe damage, e.g. boring) and for joining long pipe sections. KAN-therm Push coupling Ø12 2/Ø / ,53 A Ø14 2/Ø14 2 (P) 20/ ,70 A * Ø14 2/Ø / ,02 A Ø18 2/Ø18 2 (P) 20/ ,10 A * Ø18 2/Ø / ,42 A Ø25 3,5/Ø25 3,5 (P) 10/ ,29 A * Ø25 3,5/Ø25 3,5 10/ ,40 A P) - PPSU fitting Tools for assembly Push connectors available in chapter System KAN-therm - Tools for Push connections

4 The underfloor heating of System KAN-therm - pipes and pipe accessories KAN-therm Push sliding sleeve Ø12 2A 50/ ,41 A Ø14 2A 50/ ,43 A Ø18 2A/Ø18 2,5A 50/ ,60 A Ø25 3,5A 20/ ,00 A Size with A letter means use of sleeve for pipes PE-Xc or PE-RT with EVOH layer only. When assembling Push connections use assembly tools for PE-RT and PE-Xc pipes with appropriate inserts (purchase or rental of tools available in KAN branches). Tools used to montage the Push couplings are presented in System KAN-therm - tools for Push connections chapter, KAN-therm Press PPSU coupling Ø16 2/Ø /200 K ,21 F Ø20 2/Ø /150 K ,15 F Ø25 2,5/Ø25 2,5 5/60 K ,38 F Tools used to montage the Press couplings are presented in System KAN-therm - tools for Press connections chapter, KAN-therm cutter for Ø12-32 PE-Xc and PE-RT 1/ ,64 K

5 The underfloor heating of System KAN-therm - pipes and pipe accessories KAN-therm replacement blade for cutter for Ø12-32 pipes PE-Xc and PE-RT Code Price EUR/pcs Group * O 5,27 K KAN-therm pipe cutter for cutting multilayer pipes Ø /20 RS ,71 K KAN-therm replacement blade for pipe cutter for cutting multilayer pipes Ø14-32 Code Price EUR/pcs Group * RSM1435 6,39 K KAN-therm calibration and internal bevelling tool for multilayer pipes Size Code Price EUR/pcs Group * Ø14 KL14 23,14 K Ø16 KL16 23,14 K Ø20 KL20 23,14 K Ø25/Ø26 KL26 23,14 K KAN-therm calibration and internal bevelling universal tool for multilayer pipes Size Code Price EUR/pcs Group Ø16/Ø20/Ø25-26 KL ,35 K KAN-therm internal bending spring for multilayer pipes Size Code Price EUR/pcs Group * Ø14 SW ,50 K Ø16 SW ,81 K Ø20 SW ,94 K Ø25-26 SW ,31 K KAN-therm external bending spring for multilayer pipes Size Code Price EUR/pcs Group * Ø14 SZ ,63 K Ø16 SZ ,00 K Ø20 SZ ,50 K Ø25-26 SZ ,77 K

6 System KAN-therm Tacker - pipe fastening system KAN-therm Tacker foamed polystyrene board EPS (PS20) with foil Version Size Thickness Pcs. Code Price EUR/m² Group with metalized foil 1 5,00 m 30 mm sheet 5,00 m² 720N 4,93 A with metalized foil 1 5,00 m 20 mm sheet 5,00 m² 726N 4,18 A with laminated foil 1 5,00 m 30 mm sheet 5,00 m² 725 4,91 A with laminated foil 1 5,00 m 50 mm sheet 5,00 m² 727 6,68 A KAN-therm Tacker foamed polystyrene board EPS (PS30) with foil - hard * with metalized foil 1 5,00 m 30 mm sheet 5,00 m² 728N 6,65 A KAN-therm Tacker foamed polystyrene board EPS T-30 db with foil - elastic (sound absorbing) * with metalized foil 1 5,00 m 35-3 mm sheet 5,00 m² 729N 4,61 A KAN-therm tacker tool Code Price EUR/pcs Group ,23 K For clamping pipes with clips Code 22022, 22022S, 22022N, 22022B on Tacker styroboards 30 and 50 mm. KAN-therm integrated tacker clips Size l Pcs. in one Code Price EUR/box Group package/box Ø mm 25/ S 33,35 A After loading Taker tool, tear off adhesive tape. *** stock-out goods

7 System KAN-therm Tacker - pipe fastening system KAN-therm tacker clip for fastening pipes on foamed polystyrene boards Size l Pcs. in one Code Price EUR/bag Group package/box Ø mm 100/ ,06 A Ø mm 200/ N 5,95 A * Ø mm 1000/any K ,04 A KAN-therm tacker tool for short clips Size Code Price EUR/pcs Group * K ,28 K Applied for fastening pipes using tacker short clip code K on Tacker system boards 15 mm thick. KAN-therm tacker short clip for fastening pipes on foamed polystyrene boards Size l package/box * Ø ,2 mm 50/any K ,05 A KAN-therm adhesive tape with KAN logo Size Code Price EUR/pcs Group K ,18 A For protecting foamed polystyrene boards with foil

8 System KAN-therm Rail - pipe fastening system KAN-therm adhesive tape hand feeder Code Price EUR/pcs Group * K ,59 A KAN-therm mounting rail for pipe fastening Size Amount Code Price EUR/m Group of m in coil Ø16 - length 2m 2/100 K ,35 A Ø18 - length 2m 2/ ,35 A *** Ø20 - length 3m any K ,31 A * Ø25 - length 3m any K ,85 A KAN-therm mounting rail for pipe fastening Size Amount Code Price EUR/m Group of m in coil Ø length 0,2 m any K ,29 A Ø length 0,5 m any K ,35 A Ø length 1m any K ,31 A System KAN-therm Profil - pipe fastening system KAN-therm Profil1 foamed polystyrene board EPS T-24 db with PS foil - elastic (sound absorbing) Version Size Thickness Pcs. Code Price EUR/m² Group * Profil1 (with foil PS) 0,8 1,40 m 30-2 mm sheet 1,12 m² (6 pcs. in box) K ,23 A Total board thickness with roll formed part is 50 mm. KAN-therm Profil2 foamed polystyrene board EPS (PS20) whit PS foil - hard Profil2 (with foil PS) 0,8 1,40 m 11 mm sheet 1,12 m² (13 pcs. in box) K ,23 A Total board thickness with roll formed part is 31mm. KAN-therm profiled PS foil (polystyrene) Profil3 * Profil3 (with foil PS) 0,8 1,40 m 1 mm sheet 1,12 m² K ,66 A Total board thickness with roll formed part is 20mm. KAN-therm Profil4 foamed polystyrene board EPS (PS20) whitout foil - hard Version Size Thickness Pcs. Code Price EUR/m² Group Profil1 (without foil PS) 1,1x0,7 m 20 mm sheet 0,77 m² 730 7,70 A Total board thickness with roll formed part is 47mm. *** stock-out goods

9 System KAN-therm TBS - pipe fastening system KAN-therm TBS foamed polystyrene board EPS (PS30) - hard Version Size Thickness Pcs. Code Price EUR/m² Group TBS 0,5 1,0 m 25 mm sheet 0,50 m²/ 20pcs. K ,28 A KAN-therm TBS metal shape Size Pcs. Code Price EUR/pcs Group 1,0 0,12 m 1/40 K ,36 A KAN-therm TBS complementary foamed polystyrene board EPS (PS30) - hard Version Size Thickness Pcs./packing Code Price EUR/m² Group * TBS complementary 0,5 1,0 m 25 mm sheet 0,50 m² /20pcs. K ,43 A KAN-therm PE foil Size Thickness Amount of m² Code Price EUR/m² Group in one package 2,0 50 m 0,2 mm 100 K ,27 A Apply as system covering before laying dry jointless floor. KAN-therm TBS cutter tip Pcs./packing Code Price EUR/pcs Group 1 K ,61 K TBS cutter is suitable for cutting grooves for pipes Ø16 mm in TBS styroboards. KAN-therm TBS cutter tip Pcs./packing Code Price EUR/pcs Group 1 K ,62 K

10 System KAN-therm NET - pipe fastening system KAN-therm NET steel wire net Size Amount of m² Code Price EUR/m² Group in one package 1,2 m 2,1 m 2,52 K ,85 A Net is made of 3 mm steel wire. Spacing mm. KAN-therm grip for fastening pipes on NET net Size Amount of m² Code Price EUR/pcs Group in one package Ø16-18 mm 1000 K ,08 A * Ø20 mm 1000 K ,08 A KAN-therm plastic band for fastening pipes on NET net Size Amount of m² Code Price EUR/100 pcs Group in one package * 100 K ,59 A KAN-therm fastening band for connecting NET nets Amount of m² Code Price EUR/pcs Group in one package * 100 K ,06 A KAN-therm PE foil Size Thickness Amount of m² Code Price EUR/m² Group in one package 2,0 50 m 0,2 mm 100 K ,27 A Apply as moisture insulation beneath NET net. KAN-therm PE foil mounting peg Size Pcs./packing Code Price EUR/pcs Group Ø8 mm 100 K ,20 A

11 System KAN-therm - underfloor heating accessories KAN-therm corrugated (protection) pipe - red Size External diameter [mm] Q-ty in coil Code Price EUR/m Group Ø C 0,17 A Ø C 0,19 A Ø C 0,23 A Ø C 0,36 A Ø C 0,56 A Ø C 0,83 A Apply for hot and cold water system and central heating, as a protecting pipe, in the case of embedding the system in concrete KAN-therm corrugated (protection) pipe - blue Size External diameter [mm] Q-ty in coil Code Price EUR/m Group Ø N 0,17 A Ø N 0,19 A Ø N 0,23 A Ø N 0,36 A Ø N 0,56 A Ø N 0,83 A Apply for hot and cold water system and central heating, as a protecting pipe, in the case of embedding the system in concrete KAN-therm concrete additive: BETOKAN Size Amount of L Code Price EUR/l Group in one package BETOKAN ,65 A BETOKAN ,09 A Apply for underfloor heating to improve concrete strength. KAN-therm concrete additive: BETOKAN Plus Size Amount of L Code Price EUR/l Group in one package BETOKAN Plus 10 K ,98 A Apply for underfloor heating to improve concrete strength. Allows to reduce floor thickness to 4.5 cm above insulation

12 System KAN-therm - underfloor heating accessories KAN-therm fibre glass mesh Size (T W L) packing Code Price EUR/m² Group 0, m² K ,73 A Mesh size mm. KAN-therm anti-freezing agent Version Litres/packing Code Price EUR/l Group * -20 C ,68 A * -25 C ,85 A * -35 C ,11 A Used for central heating, air conditioning, cooling and solar systems. KAN-therm wall tape with incision Size Amount of Code Price EUR/m Group m in coil with incision ,60 A with apron ,68 A Apply to insulate underfloor heating boards from walls. KAN-therm dilatation tape with fastening strip Size Amount of Code Price EUR/m Group m in coil ,46 A Apply for expanding underfloor heating boards. Pipes going through the expansion shape should also be laid in a corrugated (protection) pipe. KAN-therm dilatation set Name of element Amount of Code Price EUR/m Group m in coil foam PE 2 K ,31 A rail 2 K ,23 A Size Pcs./packing Code Price EUR/pcs Group *corrugated (protection) pipe 0,4m* 10 K ,22 A * increased strength corrugated (protection) pipe with incision

13 System KAN-therm - manifolds and accessories for manifolds KAN-therm manifold 1 for underfloor heating with control valves (51A series) Number of Size Code Price EUR/pcs Group heating circuits (H W D) A 31,04 E A 46,81 E A 59,67 E A 72,54 E A 85,24 E A 98,08 E A 111,32 E A 124,55 E A 137,80 E A 156,49 E A 170,70 E The manifold is compatible with eurocone adapter (for PE-Xc and PE-RT) G¾ and adapter for multilayer pipe (fixed ring) G¾. Manifold outputs has a 50mm distance between each one. KAN-therm manifold 1 for underfloor heating with flowmeters (55A series) Number of Size Code Price EUR/pcs Group heating circuits (H W D) A 50,91 E A 73,92 E A 92,20 E A 112,50 E A 129,71 E A 147,18 E A 167,37 E A 187,58 E A 206,34 E A 227,57 E A 256,94 E The manifold is compatible with eurocone adapter (for PE-Xc and PE-RT) G¾ and adapter for multilayer pipe (fixed ring) G¾. Manifold outputs has a 50mm distance between each one. KAN-therm manifold 1 for underfloor heating with control valves (lower manifold body) and servomotor valves (upper manifold body) (71A series) Number of Size Code Price EUR/pcs Group heating circuits (H W D) A 38,98 E A 58,66 E A 75,95 E A 93,04 E A 110,18 E A 127,45 E A 145,22 E A 163,14 E A 180,93 E A 202,21 E A 220,09 E The manifold is compatible with eurocone adapter (for PE-Xc and PE-RT) G¾ and adapter for multilayer pipe (fixed ring) G¾. Manifold outputs has a 50mm distance between each one

14 System KAN-therm - manifolds and accessories for manifolds KAN-therm Manifold 1 for underfloor heating with servomotor valves (upper mainfold body) and flowmeter valves (lower mainfold body) (75 series) Number of Size Code Price EUR/pcs Group heating circuits (H W D) A 63,23 E A 90,47 E A 113,93 E A 140,06 E A 161,92 E A 186,18 E A 216,83 E A 241,25 E A 262,37 E A 289,55 E A 314,54 E The manifold is compatible with eurocone adapter (for PE-Xc and PE-RT) G¾ and adapter for multilayer pipe (fixed ring) G¾. Manifold outputs has a 50mm distance between each one. KAN-therm reducer G1'' G½" 10/ ,81 E G1'' G¾" 10/ ,81 E Reducer Code 4.12 and 4.13 contains O-Ring Code U28. KAN-therm male plug G1 10/ ,39 E Code contains O-Ring, code U28; others without O-Ring

15 System KAN-therm - manifolds and accessories for manifolds KAN-therm valve set, straight Size Sets in one Code Price EUR/set Group G1 G1 1/20 K ,92 E Set of valves with screw connection for manifolds of System KAN-therm fixed on a 1 profile without any additional sealing. For manifold with side supply connection. KAN-therm valve set, angular Size Sets in one Code Price EUR/set Group G1 G1 1/20 K ,08 E Set of valves with screw connection and elbows for manifolds of System KAN-therm fixed on a 1 profile without any additional sealing. For manifolds supplied from floor. KAN-therm brass handle for manifold M28 1,5 10/ ,72 E M30 1,5 10/ ,72 E Apply the element for thermostatic valves to cut-off each circuit flow: M28 1,5 - in manifolds 71, 75, 73A and 77A series. M30 1,5 - in manifolds 73A and 77A series on pump unit connection. KAN-therm extension element with flowmeter G1 L=50mm 1/ ,12 E Apply the element for manifolds 55A, 75A using nipple 1 to extend manifold by one more circuit. KAN-therm extension element with control valve G1 L=50mm 1/ ,52 E Apply the element for manifolds 55A, 75A using nipple 1 to extend manifold by one more circuit

16 System KAN-therm - manifolds and accessories for manifolds KAN-therm extension element with servomotor cut-off valve G1 L=50mm 1/ ,52 E Apply the element for manifolds 55A, 75A using nipple 1 to extend manifold by one more circuit. KAN-therm coupling for manifolds G1 10/100 R543 4,85 E For manifold to extend it by one more circuit. KAN-therm male-female terminal with special seal G1 G½ G½ 5/70 R542 4,57 E For manifold to extend it by one more circuit. KAN-therm new male plug with hex socket G½ 20/ ,69 E It contains O-Ring. KAN-therm male terminal with automatic air vent and drain G1 1/50 R ,15 E Suitable for 1 manifold 51A, 55A, 71A, 75A series. KAN-therm manual air vent valve G½ 50/ ,20 E

17 System KAN-therm - manifolds and accessories for manifolds KAN-therm plastic male air vent and drain valve G½ ,30 E G½ Suitable for 1 manifold 51A, 55A, 71A, 75A series. KAN-therm male air vent and drain valve G½ 25/ ,24 E Suitable for 1 manifold 51A, 55A, 71A, 75A series. KAN-therm automatic air vent with stop valve G½ 1/ ,94 E Stop valve makes possible to remove air vent without draining the system. KAN-therm flowmeter with thermometer * G¾ G¾ L = 8 cm any K ,55 E Apply to check flow through heating circuit. KAN-therm disc thermometer 100 C Color Pcs./packing Code Price EUR/pcs Group * red 1 K ,43 E * blue 1 K ,43 E

18 System KAN-therm - manifolds and accessories for manifolds KAN-therm manifold 1 for underfloor heating with mixing unit (73A series) Number of Size Code Price EUR/pcs Group heating circuits (H W D) A 311,23 E A 331,15 E A 346,82 E A 366,20 E A 384,01 E A 401,29 E A 419,08 E A 438,89 E A 449,38 E 1. Individual circuits of underfloor heating are controlled by electric servomotors code K and K Assemble servomotors on upper manifold body using adapters M In the case of controlling temperature with one thermostat placed in characteristic room, for controlling use the thermostatic valve build in mixing unit and fix the servomotor on thermostatic valve by adapter M Manifold is compatible with eurocone adapter (for PE-Xc and PE-RT) G¾ and adapter for multilayer pipe (fixed ring) G¾. Manifold outputs has a 50mm distance between each one. Not suitable for a low parameter heating sources KAN-therm manifold 1 for underfloor heating with mixing unit and flowmeters (77A series) Number of Size Code Price EUR/pcs Group heating circuits (H W D) A 333,80 E A 365,88 E A 395,67 E A 425,56 E A 454,82 E A 483,43 E A 513,14 E A 545,58 E A 574,46 E 1. Individual circuits of underfloor heating are controlled by electric servomotors code K and K Assemble servomotors on upper manifold body using adapters M In the case of controlling temperature with one thermostat placed in characteristic room, for controlling use the thermostatic valve build in mixing unit and fix the servomotor on thermostatic valve by adapter M Manifold is compatible with eurocone adapter (for PE-Xc and PE-RT) G¾ and adapter for multilayer pipe (fixed ring) G¾. Manifold outputs has a 50mm distance between each one. Not suitable for a low parameter heating sources KAN-therm pump group Type Pcs./packing Code Price EUR/pcs Group 25/4 1 K ,16 E 25/6 1 K ,16 E Not suitable for a low parameter heating sources

19 System KAN-therm - manifolds and accessories for manifolds KAN-therm electronic pump group Pcs./packing Code Price EUR/pcs Group 1 K ,65 E Not suitable for a low parameter heating sources KAN-therm electronic pump group with three-way mixing valve Pcs./packing Code Price EUR/pcs Group 1 K ,44 E Suitable for all heating sources. KAN-therm thermostatic valve - for the mainfold 73A and 77A series Size Pcs./packing Code Price EUR/pcs Group Rp ½ 1 V2000DUB15 11,81 A Service element for manifolds series 73A & 77A and pump group. Within M30x1,5 (grey) adapter, servomotor and room thermostat it may be used for temperature control of whole heating zone. Within thermostatic head and four way valve it performes as half automatic underfloor heating controller. KAN-therm reversing value - for the mainfold 73A and 77A series Size Pcs./packing Code Price EUR/pcs Group Rp ½ 1 V2420D0015 5,91 A Service element for manifolds series 73A & 77A and pump group. It enables medium temperature control. KAN-therm theromstatic head with the pad sensor for the manifold 73A and 77A series Size Pcs./packing Code Price EUR/pcs Group M30x1,5 1 K ,75 A The element designed for manifold 73A and 77A - it protects against exceeding temperature in the system, and shhould be fixed on the termostatic valve build in mixing unit, the pad sensor should be placed on the lower body of manifold. KAN-therm servomotor SMART adapter box Adapter M28 1,5 20/160 K ,20 A Use adapter M for valves mounted in manifolds 71A, 73A, 75A & 77A System KAN-therm with SMART servomotors KAN-therm servomotor adapter box Adapter M30 1,5 20/300 K ,20 A Use adapter M for thermostatic inlet valves mounted in manifolds 73A & 77A or System KAN-therm pump groups K , K and K

20 System KAN-therm - manifolds and accessories for manifolds KAN-therm eurocone adapter (nickel plated nut) Ø12 2 G½" 15/ ,15 A Ø12 2 G¾" 15/ ,34 A Ø14 2 G½" 15/ ,57 A Ø14 2 G¾" 15/ ,72 A Ø16 2 G¾" 15/ ,72 A Ø18 2 G¾" 15/ ,76 A Ø18 2,5 G¾" 15/ ,76 A Ø20 2 G¾" 15/150 K ,69 A Ø25 3,5 G1" 10/ ,89 A It enables connections with manifolds with male nipples and fittings. KAN-therm compression ring - service part for screw fittings Ø12 100/ ,40 A Ø14 100/ ,46 A Ø16 100/ ,46 A Ø18 100/ ,51 A Ø25 50/ ,57 A KAN-therm special spanner for eurocone adapters Size Code Price EUR/pcs Group * 30 mm K ,70 K The spanner intended for eurocone adapter G¾ montage. KAN-therm adapter for multilayer pipe (fixed ring) Ø14 G½" 20/ ,99 A Ø14 G¾" 15/ ,35 A Ø16 G½" 20/ ,95 A Ø16 G¾" 10/ ,81 A Ø20 G¾" 10/ ,05 A Ø20 G1'' 5/ ,00 A Ø25 G1" 10/ ,56 A Ø26 G1'' 10/ ,70 A All elements detiled above are avaiable in nickel plated version (on request). KAN-therm eurocone adapter for multilayer pipe Ø16 G½" 20/ N 1,63 A Ø16 G¾" 15/ N 2,06 A Ø20 G¾" 10/ N 2,35 A It may be used with KAN-therm nipple, or KAN-therm male tee or male elbow. KAN-therm straight male connector Ø16 2 G½" 10/ ,44 A Ø16 2 G¾" 10/ ,94 A The fitting is designed to be fixed directly into the manifold beem connection sealing is provided by the O-Ring seal

21 System KAN-therm - underfloor heating cabinets KAN-therm surface mounted cabinet SWN-OP for manifolds without/with mixing units Type Number of heating circuits Dimensions Pcs./pack Code Price EUR/pcs Group (without/with mixing unit) (H W D) SWN-OP 10/ / OP 51,64 D SWN-OP 11/ / OP 62,19 D SWN-OP 15/ / OP 70,21 D Table with cabinets SWN-OP Number of circuits Cabinet type Code Height [mm] Width [mm] Depth [mm] manifold OP manifold OP + Set-P/Set-K manifold OP with mixing unit SWN-OP - 10/ OP / SWN-OP - 11/ OP / SWN-OP - 15/ OP / KAN-therm in wall -mounted cabinet SWPG-OP type, to cover by ceramic tile, for manifolds without/with mixing unit Type Number of heating circuits Dimensions Pcs./pack Code Price EUR/pcs Group (without/with mixing unit) (H W D) * SWPG-OP 10/ / G-OP 46,61 D * SWPG-OP 11/ / G-OP 58,68 D * SWPG-OP 15/ / G-OP 65,84 D Table with cabinet choice SWPG-OP Number of circuits Cabinet type Code Height [mm] Width [mm] Depth [mm] manifold OP manifold OP + Set-P/Set-K manifold OP with mixing unit SWPG-OP - 10/3 1300G-OP / SWPG-OP - 11/7 1310G-OP / SWPG-OP - 15/ G-OP / KAN-therm in wall -mounted cabinet SWP-OP type for manifolds without/with mixing unit Type Number of heating circuits Dimensions Pcs./pack Code Price EUR/pcs Group (without/with mixing unit) (H W D) SWP-OP 10/ / OP 55,16 D SWP-OP 11/ / OP 64,21 D SWP-OP 15/ / OP 66,94 D Table with cabinet choice SWP-OP Number of circuits Cabinet type Code Height [mm] Width [mm] Depth [mm] manifold OP manifold OP + Set-P/Set-K manifold OP with mixing unit SWP-OP - 10/ OP / SWP-OP - 11/ OP / SWP-OP - 15/ OP /

22 System KAN-therm Basic - automatics KAN-therm electronic room thermostat with led indicator Typ Pcs./packing Code Price EUR/pcs Group 230V 1 K ,63 A 24V 1 K ,63 A The thermostat is compatible with servomotors code K and K by means of strips code B2012, B2022, B4012, B4022. KAN-therm electronic room thermostat heating/cooling Typ 230V 1 K ,03 A 24V 1 K ,03 A KAN-therm bimetallic room thermostat Typ 230V 1/ ,18 A 230V/24V 1/ ,09 A The thermostat is compatible with servomotors code K and K by means of strips code B2012, B2022, B4012, B4022. KAN-therm week controller Pcs./packing Code Price EUR/pcs Group 1 K ,22 A *** stock-out goods

23 System KAN-therm Basic - automatics KAN-therm week controller with floor temperature sensor 1 TH232-AF ,46 A KAN-therm terminal block for underfloor heating 230V 230V 1 B ,52 A 230V with pump module 1 B ,28 A The terminal block is applied to connect servomotors with thermostats 230V. Additionally, the terminal block with pump module turns off the pump when all servomotors are closed. KAN-therm terminal block for underfloor heating 24V 24V 1 B ,52 A 24V with pump module 1 B ,28 A The terminal block is applied to connect servomotors with thermostats 24V. Additionally, the terminal block with pump module turns off the pump when all servomotors are closed. The 24V terminal block has no transformer KAN-therm terminal block heating/cooling with pump module Basic 230V (without power cord) 1 K ,83 A *** on stock-out request goods

24 System KAN-therm Basic - automatics KAN-therm terminal block heating/cooling with pump module Basic 24V (without power adapter) 1 K ,83 A KAN-therm power adapter 230V - 24V for Basic terminal block 1 K ,82 A *** stock-out goods

25 System KAN-therm SMART - automatics NEW KAN-therm room thermostat with LCD display without floor sensor 1 K ,30 A with floor sensor 1 K ,53 A NEW KAN-therm 230V terminal block with LAN module up to 4 room thermostats and 6 servomotors 1 K ,49 A up to 8 room thermostats and 12 servomotors 1 K ,85 A up to 12 room thermostats and 18 servomotors 1 K ,56 A NEW KAN-therm 24V terminal block with LAN module and power converter up to 4 room thermostats and 6 servomotors 1 K ,96 A up to 8 room thermostats and 12 servomotors 1 K ,33 A up to 12 room thermostats and 18 servomotors 1 K ,83 A NEW KAN-therm actuator 230V NC type 1 K ,98 A ** NO type 1 K ,45 A NEW KAN-therm actuator 24V NC type 1 K ,98 A ** NO type 1 K ,45 A NEW KAN-therm external antena 1 K ,65 A Set includes 5 m cable. NEW KAN-therm repeater 1 K ,04 A Set includes 230V power converter ** availability by individual arrangements

26 System KAN-therm - additional accessories KAN-therm servomotor SMART adapter box Adapter M28 1,5 20/160 K XXX A Use adapter M for valves mounted in manifolds 71A, 73A, 75A & 77A System KAN-therm with SMART servomotors KAN-therm servomotor adapter box Adapter M30 1,5 20/300 K ,20 A Use adapter M for thermostatic inlet valves mounted in manifolds 73A & 77A or System KAN-therm pump groups K , K and K KAN-therm four-way H 6 valve 1 with by-pass Pcs./packing Code Price EUR/pcs Group * ,35 A Valve for manual control - a constituent of mixing unit (code ). To H 6 valve a set union connectors can be purchased (as shown in the picture) code consisting of 2 female bodies with 2 nuts and 2 seals. KAN-therm mixing unit with four-way valve - KAN-Bloc Version Pcs./packing Code Price EUR/pcs Group *** T-40 U ,68 A *** T-40 U ,12 A T-60 Delta HE ,55 A Set for manual control (constant value). For automatic control SM4 servomotor is required (code ) controlled by weather controller. Instead of weather controller, boiler automatics can be used (if it has possibility to control additional mixing circuit). KAN-therm room temperature sensor with remote control and LCD screen Pcs./packing Code * N 80,56 A Room temperature sensor is provided as an additional equipment for weather week controller code N. *** stock-out goods

27 System KAN-therm - additional accessories KAN-therm SM 4 servomotor Pcs./packing Code Price EUR/pcs Group * ,07 A The servomotor allows to use automatic control of mixing unit with four-way valve KAN-Bloc with weather controller, or using boiler automatics (boiler automatics has to have possibility to control an addittional mixing circuit). KAN-therm whether controller indented for on wall assembly Pcs./packing Code Price EUR/pcs Group * N 141,45 A Apply for controlling and mixing unit with four way valve KAN-Bloc with SM4 servomotor (code ). The controller set includes external temperature sensor (APS), supply temperature pad sensor (VFAS), controlling mounting plate (assembly on wall). KAN-therm pump thermal switch * 1 K ,31 A KAN-therm underfloor heating unit with valve, thermostatic head and vent 1 K ,70 A NEW KAN-therm ice cover controller 1 K ,12 A NEW KAN-therm snow and ice sensor with 15m cord 1 K ,12 A Snow and ice sensor cooperates with ice cover controller Code K