CONTENTS 1 /01. % " !! " 9 #$ % &! " 10 ) (, - $ (. - $ $ " ' ( ) * + 11 # # #

Transcription

1 Price list 2012 by

2 CONENS

3 b!klimax system 2

4 b!klimax system Radiant Panel 2200 b!klimax system 1 b!klimax radiant panel is made of polystyrene, thickness 40 mm, and it includes polybutilene pipes Ø 6 mm with anti-oxygen barrier according to IN Panel and pipes are covered with a special layer of reinforced pre-plaster to increase their thermal output. code size equivalent tot. thick. mm thermal conductivity W/(m K) thermal resistance* (m 2 K)/W price x600x $ /pc Radiant Panel 1200 b!klimax radiant panel is made of polystyrene, thickness 40 mm, and it includes polybutilene pipes Ø 6 mm with anti-oxygen barrier according to IN Panel and pipes are covered with a special layer of reinforced pre-plaster to increase their thermal output. code size equivalent tot. thick. mm thermal conductivity W/(m K) thermal resistance* (m 2 K)/W price x600x $ /pc Radiant Panel 600 b!klimax radiant panel is made of polystyrene, thickness 40 mm, and it includes polybutilene pipes Ø 6 mm with anti-oxygen barrier according to IN Panel and pipes are covered with a special layer of reinforced pre-plaster to increase their thermal output. code size equivalent tot. thick. mm thermal conductivity W/(m K) thermal resistance* (m 2 K)/W price x600x $ /pc 3 *UNI EN 13163

5 b!klimax+ system Radiant panel 1200x2400 made of plasterboard with insulating polystyrene b!klimax+ radiant panels are made up of 12.5-mm thick plasterboard of 2.88 m² (1200 mm x 2400 mm). he plasterboard shows a drawing of the hydraulic circuits. b!klimax+ radiant panels contain 4 hydraulic circuits, made of PB pipe Ø the panel through an aluminium metal diffuser, while thermal insulation is assured thorugh a layer of moulded polystyrene, thickness 40 mm and density 30 Kg/m³, NEW Next production code size mm weight kg price x2400x $ /pc Neutral panel 1200x2400 made of plasterboard with insulating polystyrene (1200 mm x 2400 mm). hermal insulation is assured thorugh a layer of moulded area which is not covered with radiant panels and the area where distributors are installed. It can be cut according to the actual requirements. NEW Next production code size mm weight kg price x2400x $ /pc 4

6 b!klimax+ system Radiant panel 1200x2400 made of plasterboard with insulating rockwool b!klimax+ system 1 b!klimax+ radiant panels are made up of 12.5-mm thick plasterboard of 2.88 m² (1200 mm x 2400 mm). he plasterboard shows a drawing of the hydraulic circuits. b!klimax+ radiant panels contain 4 hydraulic circuits, made of PB pipe Ø the panel through an aluminium metal diffuser, while thermal insulation is assured designed to accommodate PB pipes. NEW Next production code size mm weight kg price x2400x $ /pc Neutral Panel 1200X2400 Made of Plasterboard with Insulating Rockwool mm x 2400 mm). hermal insulation is assured thorugh a layer of rockwool, is not covered with radiant panels and the area where distributors are installed. It can be cut according to the actual requirements. NEW Next production code size mm weight kg price x2400x $ /pc 5

7 Quadrotto 600x600 with insulating polystyrene NEW Next production b!klimax+ Quadrotto 600x600 consists of a metal plafond made of steel 5/10 postpainted, base 15 mm, lowered for 8 mm, right angle, micro-perforated surface with a smooth perimeter of 20 mm. One hydraulic circuit, made of PB pipe Ø 6 an aluminium metal diffuser. hermal insulation is assured through a moulded, shaped polystyrene layer, thickness 40 mm and density 30 Kg/m³. code size mm weight kg price x600x $ /pc Quadrotto 600x600 with insulating rockwool NEW Next production b!klimax+ Quadrotto 600x600 consists of a metal plafond made of steel 5/10 postpainted, base 15 mm, lowered for 8 mm, right angle, micro-perforated surface with a smooth perimeter of 20 mm. One hydraulic circuit, made of PB pipe Ø 6 an aluminium metal diffuser. hermal insulation is assured through a rockwool layer, thickness 40 mm and density 165 Kg/m³. code size mm weight kg price x600x $ /pc Passive metal plafond 600x600 with insulating polystyrene NEW Next production Passive metal plafond made of steel 5/10 post-painted, base 15 mm, lowered for 8 mm, right angle, micro-perforated surface with a smooth perimeter of 20 mm. hermal insulation is assured through a moulded, shaped polystyrene layer, thickness 40 mm and density 30 Kg/m³. code size mm weight kg price x600x $ /pc Passive metal plafond 600x600 with insulating rockwool NEW Next production Passive metal plafond made of steel 5/10 post-painted, base 15 mm, lowered for 8 mm, right angle, micro-perforated surface with a smooth perimeter of 20 mm. hermal insulation is assured through a rockwool layer, thickness 40 mm and density 165 Kg/m³. code size mm weight kg price x600x $ /pc 6

8 Quadrotto 1200x600 with insulating polystyrene b!klimax+ system 1 NEW Next production b!klimax+ Quadrotto 1200x600 consists of a metal plafond made of steel 5/10 post-painted, base 24 mm, lowered for 8 mm, right angle, microperforated surface with a smooth perimeter of 20 mm. he hydraulic circuit, made of PB pipe Ø 6 mm with anti-oxygen barrier according to IN 4726, is assured through a moulded, shaped polystyrene layer, thickness 40 mm and density 30 Kg/m³. code size mm weight kg price x600x $ /pc Quadrotto 1200x600 with insulating rockwool NEW Next production b!klimax+ Quadrotto 1200x600 consists of a metal plafond made of steel 5/10 post-painted, base 24 mm, lowered for 8 mm, right angle, microperforated surface with a smooth perimeter of 20 mm. he hydraulic circuit, made of PB pipe Ø 6 mm with anti-oxygen barrier according to IN 4726, is assured through a rockwool layer, thickness 40 mm and density 165 Kg/ m³. code size mm weight kg price x600x $ /pc Passive metal plafond 1200x600 with insulating polystyrene NEW Next production Metal plafond 1200x600 made of steel 5/10 post-painted, base 24 mm, lowered for 8 mm, right angle, micro-perforated surface with a smooth perimeter of 20 mm. hermal insulation is assured through a moulded, shaped polystyrene layer, thickness 40 mm and density 30 Kg/m³. code size mm weight kg price x600x $ /pc Passive metal plafond 1200x600 with insulating rockwool NEW Next production Metal plafond 1200x600 made of steel 5/10 post-painted, base 24 mm, lowered for 8 mm, right angle, micro-perforated surface with a smooth perimeter of 20 mm. hermal insulation is assured through a rockwool layer, thickness 40 mm and density 165 Kg/m³. code size mm weight kg price x600x $ /pc 7

9 Cabinet for MAXI Manifolds his cabinet is made of zinc-plated sheet iron. Manifolds are placed into it by using proper brackets. here are suitable outlets for pipes both upwards and downwards. he cabinet is equipped with a protective cover for plaster, a white metal door painted with epoxy powders, and lockset x700x140 mm up to 6+6 outlets 800x700x140 mm up to10+10 outlets 1000x700x140 mm up to12+12 outlets $ /pc $ /pc $ /pc MAXI Manifolds MAXI manifold, Ø 1 ½, made of plastic material, ensures a modular assembly, be combined with electrothermic heads controlled by a thermostat, air vent and to its clips and o-rings, and it can be installed with the pipes upwards, downwards, or both. Anti-condensation shells are supplied as standard. code outlets price $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc Pre-insulated red/blue pipes bar version is recommended his polybutilene pipe is provided with anti-oxygen barrier according to IN 4726 EN , Ø 20 mm, and it is covered with an insulating pipe sleeve. It is used to connect distributors with MAXI manifolds. Package: 50-m rolls. Package: 10 bars of 4 m. code package size price rolls Ø 20 x 50 m red $ 6.74 /m rolls Ø 20 x 50 m blue $ 6.74 /m bars Ø 20 x 4 m red $ 7.15 /m bars Ø 20 x 4 m blue $ 7.15 /m 8

10 8-way open distributors b!klimax system Pair of distributors made of plastic, specially shaped to guarantee easy connection with the pipes from b!klimax panels. hese distributors are provided with anti- mm and Ø 20 mm. Package: 1 pair $ /pack 4-way open distributors Pair of distributors made of plastic, specially shaped to guarantee easy connection with the pipes from b!klimax panels. hese distributors are provided with anti- mm and Ø 20 mm. Package: 1 pair $ /pack 8-way closed distributors Pair of distributors made of plastic, specially shaped to guarantee easy connection with the pipes from b!klimax panels. hese distributors are provided with anti- mm and Ø 20 mm. Package: 1 pair $ /pack 4-way closed distributors Pair of distributors made of plastic, specially shaped to guarantee easy connection with the pipes from b!klimax panels. hese distributors are provided with anti- mm and Ø 20 mm. Package: 1 pair $ /pack * Rockwool anti-condensation shells are also available. Price list on demand. 9

11 Pre-insulated PB Pipes Ø 6 mm his polybutilene pipe, Ø 6 mm, is provided with anti-oxygen barrier according to IN 4726 EN It is covered with expanded elastomer with closed cells and smooth surface, thickness 6 mm. It is used to connect QUAROO with the distributors. Package: 50-m rolls. code price pre-insulated $ 3.27 /m RZ White Electrothermic Head hermo-electric actuator to control each circuit through a room thermostat. It can be installed upside-down. isplay of the functioning mode (open/close), easy Input 230 V. egree of protection IP 44. It can be used with MAXI - OP COMPOSI - OP CONROL - CONROL manifolds. RZ White Electrothermic Head with Micro-switch hermo-electric actuator to control each circuit through a room thermostat. It is provided with limit micro-switch and can be installed upside-down. isplay of removable cable for easy replacement. Input 230 V and 24 V. egree of protection IP 44. It can be used with MAXI - OP COMPOSI - OP CONROL - CONROL manifolds. code tension price V $ /pc V with micro $ /pc V with micro $ /pc Industry System Elbow his elbow is used for pipes Ø 25 mm, and it is made of plastic. Its double function is to support the pipes near the manifolds vertically and to protect them from any damage $ 7.64 /pc 10

12 b!klimax system 1 and Ø 20 mm. Ø 6 Package with 10 items (with anti-condensation shells). Ø 20 Package with 5 items Ø 6 $ 7.56 /pc Ø 20 $ /pc Package: 1 item. Package: 1 item. code price ee $ /pc Cross $ /pc Ø 20 mm. Package: 1 item Ø 20 $ /pc Closing Plugs for Outlets Ø 6 mm and Ø 20 mm Plastic plugs are used to close the unused outlets of a distributor. Package: 5 items Ø 6 $ 1.84 /pc Ø 20 $ 3.47 /pc 11

13 Insulating sleeve his insulating sleeve is made of expanded elastomer with closed cells and smooth surface, which is used for the thermal insulation of polybutilene pipes Ø 6 mm. hickness: 6 mm. Package: 2 m $ 1.02 /m Inibitor XR20 prevent encrustations on metal parts. It can be used in systems with aluminium It controls the microbiological growth, and it is suitable for any kind of system. osage: 2% of the quantity of water in the system. Package: 3-10 L L can $ /can L can $ /can Neutral Panel gaps where there are no radiant panels. It can be used with traditional b!klimax only. code size mm price x600x27 $ /pc Bagged Rockwool ensity: 50 Kg/m³. Package: 6 m 2. code size mm price x600x30 $ /pack Air rap his air trap is made of brass, and it is used to deaerate radiant systems. It is a necessary component in b!klimax systems, but it is recommended also in the other systems. FF (female - female) pipe connections. m 3 /h b!klimax m up to Ø ¾ $ /pc 2.6 up to Ø 1 $ /pc 5.3 up to Ø 1 ¼ $ /pc 6.3 up to Ø 1 ½ $ /pc 9.0 up to Ø 2 $ /pc 12

14 Joint kit for pipes Ø 6 mm and Ø 20 mm Package: 1 item. b!klimax system Ø 6 $ 1.84 /pc Ø 20 $ 2.86 /pc Mushroom-shaped Plug Package: 50 items $ 0.41 /pc better preservation of O-rings (1 package every 75 elementary circuits). Package: 1 item ml $ 9.19 /pc RZ Retard 180 M Retarding additive to set gypsum and bonding agents. Recommended dosage: 0.5 % of the quantity of water which is necessary to knead the bonding agent (100 g in 20 l of water or 1 can every 50 m²). Recommended with traditional b!klimax panels. Package: 1 Litre $ /pc Screw and Washer Package: 200 items $ 0.72 /pc FOR FURHER ACCESSORIES, PLEASE SEE HE SPARE PAR LIS. 13

15 Residential Systems 14

16 Underfloor System - Cover Panel 2 Plastic-coated Cover Panel Cover panel with reliefs made of waterproof moulded expanded polystyrene (according to UNI EN 13163), with closed-cell structure, which has high to protect it from humidity and to improve its resistance to the deformation of the walking surface. hermal conductivity W/(m K), insulating thickness 20/30/40/50/61.5 mm, total thickness 48/58/68/78/89.5 mm, equivalent total thickness 29/39/48.9/58.7/70.0 mm, thermal resistance according to UNI EN /1.10/1.35/1.65/2.0 (m² K)/W. hese panels have a tongue along the perimeter to connect them for proper combination. hey have a moulded surface with reliefs of 27 mm, so that the cross-linked polyethylene pipes Ø17 mm can be spacing of 8.3 cm or multiples. code size mm price Package: 10 m² (13 items) x663x20 $ /m x663x30 $ /m x663x40 $ /m Smooth Cover panel without reliefs is used near the manifolds. Package: 1.54 m 2 (2 items) x663x50 $ /m x663x61.5 $ /m 2 Smooth Cover Panel (near manifolds) code size mm price x663x20 $ /m x663x30 $ /m Flooring 2 Skirting board 3 Concrete 4 PE-Xc pipe Ø Perimeter belt 6 Structural base + levelling 7 Cover 30 panel 8 Anti-shrinkage mesh Specifications (UNI EN 13163) COVER 20 code COVER 30 code COVER 40 code COVER 50 code COVER 60 code FEAURES hermal conductivity at10 C Compressive strength 10% Compressive strength 5% Compressive strength 2% hermal resistance Equivalent total thickness emperature limit Film thickness (UNI EN 12667) (UNI 826) (UNI 826) (UNI 826) (UNI EN 13163) (UNI EN 1264/3) W/(m K) 120 kpa 115 kpa 82 kpa 0.80 (m 2 k)/w 29 mm 70 C 150 micron W/(m K) 120 kpa 115 kpa 82 kpa 1.10 (m 2 k)/w 39 mm 70 C 150 micron W/(m K) 120 kpa 115 kpa 82 kpa 1.35 (m 2 k)/w 48.9 mm 70 C 150 micron W/(m K) 120 kpa 115 kpa 82 kpa 1.65 (m 2 k)/w 58.7 mm 70 C 150 micron W/(m K) 120 kpa 115 kpa 82 kpa 2.0 (m 2 k)/w 70.0 mm 70 C 150 micron SIZE Length Width Insulating thickness Nominal thickness Package (UNI 822) (UNI 822) (UNI 823) mm 1161 mm 663 mm 20 mm 48 mm 1161 mm 663 mm 30 mm 58 mm 1161 mm 663 mm 40 mm 68 panels: 13 (10 m 2 ) mm 1161 mm 663 mm 50 mm 78 mm 1161 mm 663 mm 61.5 mm

17 Underfloor Systems - Acoustic Plus Panel Acoustic Plus Panel Lw 26 db Acoustic Plus panel with reliefs made of stretch, expanded, sintered polystyrene with double density, ideal for thermal and acoustic insulation. Its components and production technology ensure unique acoustic properties to absorb the trample mm, which protects it from humidity and improves its resistance to the deformation of the walking surface. hermal conductivity W(m K) according to EN 12667, insulating thickness 30 mm, total thickness 58 mm, total equivalent thickness 38.2 mm, thermal resistance 1.05 (m² K)/W in conformity with UNI EN 13163, trample noise reduction of 26 db according to UNI EN 140-8, dynamic rigidity S 20 MN/ m³. hese panels have a tongue along the perimeter to connect them for proper combination, and they have a moulded surface with reliefs of 28 mm, so that the with spacing of 8.3 cm or multiples. Package: 10 m² (13 items) code size mm price x663x30 $ /m Flooring 2 Skirting board 3 Concrete 4 Pipe PE-Xc Perimeter belt 6 Structural base + levelling 7 Acoustic Plus Panel 8 Anti-shrinkage mesh Specifications (UNI EN 13163) ACOUSIC PLUS PANEL code Flooring Ceramic, Parquet Marble, Wood, Brick Necessary thickness cm cm cm FEAURES hermal conductivity 10 C Max. dynamic load hermal resistance Equivalent total thickness Reduction of noise pressure due to footsteps ynamic rigidity emperature limit Film thickness (UNI EN 12667) (UNI EN 13163) (UNI EN 12667) (UNI EN 140-8) UNI EN W/(m K) CP3 ( 4 kpa) 1.05 (m 2 k)/w mm 40.5 Lw 26 db S 20 ( 20) MN/m 3 70 C 150 micron SIZE Length Width Insulating thickness Nominal thickness Package (UNI 822) (UNI 822) (UNI 823) mm 1161 mm 663 mm 30 mm 58 panels: 13 (10 m 2 ) 16

18 2 Underfloor Systems - New Plus Panel Pannello New Plus New Plus panel with reliefs made of waterproof moulded expanded polystyrene (according to UNI EN 13163), with closed-cell structure, which has high mechanical to protect it from humidity and to improve its resistance to the deformation of the walking surface. hermal conductivity W/(m K), equivalent total thickness 17.8 mm, thermal resistance according to UNI EN (m² K)/W. hese panels have a tongue along the perimeter to connect them for proper combination. hey have a moulded surface with reliefs of 23 mm, so that the cross-linked 8.3 cm or multiples. Package: 10-m² (20 items). code size mm price x500x10 $ /m Flooring 2 Skirting board 3 Concrete 4 Pipe PE-Xc Perimeter belt 6 Structural base + levelling 7 New Plus Panel 8 Anti-shrinkage mesh Specifications (UNI EN 13163) NEW PLUS PANEL code Flooring Ceramic, Parquet Marble, Wood, Brick Necessary thickness 8-9 cm 9-11 cm cm FEAURES hermal conductivity 10 C Compressive strength 10% Compressive strength 5% Compressive strength 2% hermal resistance Equivalent total thickness emperature limit Film thickness (UNI EN 12667) (UNI 826) (UNI 826) (UNI 826) (UNI EN 13163) (UNI EN 1264/3) W/(m K) 250 kpa 180 kpa 130 kpa 0.50 (m 2 k)/w 17.8 mm 70 C 150 micron SIZE Length Width Insulating thickness Nominal thickness Package (UNI 822) (UNI 822) (UNI 823) mm 1000 mm 500 mm 10 mm 33 panels: 20 (10 m 2 ) 11 17

19 Underfloor Systems - Slim Panel Slim Panel X PIPE Ø 14 Slim panel with reliefs made of waterproof moulded expanded polystyrene (according to UNI EN 13163), with closed-cell structure and high mechanical it from humidity and improves its resistance to the deformation of the walking surface. hermal conductivity W/(m K), insulating thickness 10 mm, total thickness 26 mm, equivalent total thickness 13.8 mm, thermal resistance 0.40 (m² K)/W according to UNI EN his panel has a moulded surface with easily into the tabs of the panel. Package: 10 m² (20 items). code size mm price x500x10 $ /m Flooring 2 Skirting board 3 Concrete 4 Pipe PE-Xc Perimeter belt 6 Structural base + levelling 7 Slim Panel 8 Anti-shrinkage mesh Specifications (UNI EN 13163) SLIM PANEL code Flooring Ceramic, Parquet Marble, Wood, Brick Necessary thickness cm cm FEAURES hermal conductivity 10 C Compressive strength 10% hermal resistance Equivalent total thickness emperature limit Film thickness (UNI EN 12667) (UNI 826) (UNI EN 13163) (UNI EN 1264/3) (EN ISO ) W/(m K) 250 kpa 0.40 (m 2 k)/w 13.8 mm 70 C 150 micron Euroclass F SIZE Length Width Insulating thickness Nominal thickness Package (UNI 822) (UNI 822) (UNI 823) mm 1000 mm 500 mm 10 mm 26 panels: 20 (10 m 2 ) 18

20 2 Underfloor Systems - Aluminized Panel Aluminized Panel Smooth aluminized panel made of waterproof moulded expanded polystyrene (according to UNI EN 13163), with closed-cell structure and high mechanical order to protect it from humidity and to improve its resistance to the deformations of the walking surface. hermal conductivity W/(m K), insulating thickness 20/30 mm, equivalent total thickness 20/30 mm, thermal resistance according to UNI EN /0.85 (m² K)/W. hese panels have a tongue along the perimeter to connect them for proper alignment. Package: 10 m² (13 items). NEW code size mm price x663x20 $ /m x663x30 $ /m Flooring Skirting board Concrete Pipe PE-Xc Perimeter belt Structural base + levelling Aluminized Panel Specifications (UNI EN 13163) ALUMINIZE PANEL Code Code Flooring Ceramic, Parquet Marble, Wood, Brick Necessary thickness cm cm cm FEAURES hermal conductivity 10 C Compressive strength 10% Compressive strength 5% Compressive strength 2% hermal resistance Equivalent total thickness emperature limit Film thickness (UNI EN 12667) (UNI 826) (UNI 826) (UNI 826) (UNI EN 13163) (UNI EN 1264/3) W/(m K) 120 kpa 115 kpa 82 kpa 0.55 (m 2 k)/w 20 mm 70 C 150 micron W/(m K) 120 kpa 115 kpa 82 kpa 0.85 (m 2 k)/w 30 mm 70 C 150 micron SIZE Length Width Insulating thickness Nominal thickness Package (UNI 822) (UNI 822) (UNI 823) mm 1161 mm 663 mm 20 mm 20 panels: 13 (10 m 2 ) mm 1161 mm 663 mm 30 mm (10 m 2 ) 19

21 Underfloor Systems - Wire Mesh Ø 3 Smooth Extruded Panel Insulating panels made of extruded expanded polystyrene, produced with ecological gas, without CFC and HCFC, according to the European regulations Euroclass E. Compressive strength with 10% of deformation according to EN kpa 20 mm and 300 kpa 30 and 40 mm. Insulating thickness mm. hermal conductivity: W/(m K) 20 mm / W/(m K) 30 and 40 mm. Package for thickness of 20 mm: 15 m 2 (20 items). Package for thickness of 30 mm: m² (14 items). Package for thickness of 40 mm: 7.50 m² (10 items). code size mm price x600x20 $ /m x600x30 $ /m x600x40 $ /m Flooring 2 Skirting board 3 Concrete 4 Pipe PE-Xc Perimeter belt 6 Structural base + levelling 7 Smooth Extruded Panel 30 8 Wire mesh Ø 3 mm Specifications (UNI EN 13163) SMOOH EXRUE PANEL code code code Flooring Ceramic, Parquet Marble, Wood, Brick Necessary thickness panel: 30 mm cm cm cm FEAURES hermal conductivity 10 C Compressive strength 10% Compressive strength 5% Compressive strength 2% hermal resistance Equivalent total thickness emperature limit Film thickness (UNI EN 12667) (UNI 826) (UNI 826) (UNI 826) (UNI EN 13163) (UNI EN 1264/3) (EN ISO 11925/2) W/(m K) 200 kpa -- kpa -- kpa 0.60 (m 2 k)/w 20 mm 75 C Euroclass E W/(m K) 300 kpa -- kpa -- kpa 0.90 (m 2 k)/w 30 mm 75 C Euroclass E W/(m K) 300 kpa -- kpa -- kpa 1.20 (m 2 k)/w 40 mm 75 C Euroclass E SIZE Length Width Insulating thickness Nominal thickness Package (UNI 822) (UNI 822) (UNI 823) mm 1250 mm 600 mm 20 mm 20 panels: 20 (15 m 2 ) mm 1250 mm 600 mm 30 mm (10.50 m 2 ) mm 1250 mm 600 mm 40 mm (7.50 m 2 ) 20

22 Electro-welded Wire Mesh Ø 3 mm Electronically welded mesh made of zinc-plated steel, which is used to support and secure RZ CLIMA pipes Ø and Ø at spacing of 8.3 cm or multiples. It is made up of 3-mm wires and single meshes 83x83 mm. Package: 2 m² (1 sheet) Ø 3-83x83 mm $ /m 2 Clips for mesh Clips made of plastic material to secure RZ CLIMA pipes Ø to the welded mesh with 3-mm wires. Package: 500 items in pre-assembled rows Ø 3 mm x $ 0.31 /pc Industrial clips 20/3 Fixing clips for pipes Ø 20 mm made of plastic to support the pipe with the welded mesh Ø 3 mm. he single meshes should correspond to the spacing between the pipes. Package: 100 items Ø 20 mm x 3 mm $ 0.47 /pc 21

23 Specifications for PE-Xc Pipe Outside iam. (mm) hickness (mm) Weight (kg/m) PN at 20 C PN at 60 C PN at 95 C Water Content l/m Features Standard ensity bar 12 bar 8 bar ear resistance E-modulus at 20 C Elongation at tear Oxygen-tightness 2 2 PE-Xc Piping bar 10 bar 10 bar bar Value 940/950 > > OK bar Unit Kg/m 3 N/mm 2 N/mm 2 % W(m K) m/(m K) 6 bar Reference Law EN EN EN IN Specifications for for PE-Xa Pipe Outside iam. (mm) hickness (mm) Weight (kg/m) PN at 70 C Features Standard ensity 17 ear resistance bar E-modulus at 20 C Elongation at tear 20 C Oxygen-tightness bar Value > Water Content l/m Unit Kg/m 3 % N/mm 2 % W(m K) mg/(m 2 d) m/(m K) Reference Law EN ISO 1183 Metodo EN 579 ISO ISO IN IN IN

24 Underfloor Systems - Piping RZ Clima PE-Xc Pipe Ø 17 RZ Clima PE-Xc pipe Ø 17 is made of high-density electro-physically crosslinked polyethylene with anti-oxygen barrier according to UNI EN ISO and IN 4726, which guarantees even and stable cross-links and constant characteristics over time. iameter 17 mm - hickness 2 mm Ø m 240 $ 2.36 /m Ø m 600 $ 2.36 /m RZ Clima PE-Xc Pipe Ø 14 RZ Clima PE-Xc pipe Ø 14 is made of high-density electro-physically crosslinked polyethylene with anti-oxygen barrier according to UNI EN ISO and IN 4726, which guarantees even and stable cross-links and constant characteristics over time. iameter 14 mm - hickness 2 mm Ø m 300 $ 2.00 /m RZ Clima PE-Xc Pipe Ø 20 RZ Clima PE-Xc pipe Ø 20 is made of high-density electro-physically crosslinked polyethylene with anti-oxygen barrier according to UNI EN ISO and IN 4726, which guarantees even and stable cross-links and constant characteristics over time. iameter 20 mm - hickness 2 mm Ø m 240 $ 3.76 /m Ø m 600 $ 3.76 /m RZ Clima PE-Xa Pipe Ø 17 RZ Clima PE-Xa pipe Ø 17 is made of high-quality polyethylene, with crosslinking produced through a typology method, with anti-oxygen barrier according to UNI EN ISO and IN 4726, which guarantees even and stable crosslinks and constant characteristics over time. iameter 17 mm - hickness 2 mm Ø m 600 $ 2.36 /m 23

25 SLIM Cabinet for Manifolds (with lockset) Slim cabinet made of zinc-plated sheet metal, thickness 8 cm, with adjustable feet, height 72 : 78, a net on the back, dead holes for side entrances, slide guides for a pair of brackets, a protective cover for plaster, an adjustable white metallic door painted with epoxy powders, which is complete with frame and lockset cm 50 (OP up to CONROL up to 6+6) cm 75 (OP up to CONROL up to 11+11) cm 100 (MANIFOLS up to 13+13) $ /pc $ /pc $ /pc OP COMPOSI Pre-assembled Manifold op Composit manifold Ø 1 is made of thermoplastic and used to distribute the thermometers with a liquid-crystal display, on-off valves (suitable for electrothermal with ball air vent valves and ball drain valves with hose nozzles and plugs, brackets polyethylene pipes Ø or Ø Operating Pressure: 4 bar. code Ø 14 code Ø 17 outlets price Made of thermoplastic $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ 1, /pc Closing Plug Blind cap used to close circuits on op Composit manifolds. Package: 1 item $ /pc Contact hermometer conductive paste. Package: 10 items pipe Ø 17 $ /pc 24

26 (Supplied as standard with op Composit manifolds). manifold. Package: 10 items Ø 14 $ /pc Ø 17 $ /pc 2 manifolds. Package: in pairs Ø 14 $ /pc Ø 16 $ /pc Ø 20 $ /pc Eurocone Adapter Ø 3/4 Clutch Eurocone adapter Ø ¾ to connect the pipes with op Composit manifold. Package: in pairs $ 6.13 /pc RZ Black Electrothermic Head hermo-electric actuator to control each circuit through a room thermostat. Input 230V. egree of protection IP 44. It can be used with OP COMPOSI - OP CONROL - CONROL manifolds and high-temperature outlets of Kit and MR. RZ Black Electrothermic Head with microswitch hermo-electric actuator to control each circuit through a room thermostat. It is provided with limit micro-switch. Input 230 V. egree of protection IP 44. It can be used with OP COMPOSI - OP CONROL - CONROL manifolds and hightemperature outlets of KI and MR modules). code input 230 V price $ /pc V + micro $ /pc RZ White Electrothermic Head hermo-electric actuator to control each circuit through a room thermostat. It can be installed upside-down. isplay of the functioning mode (open/close), easy Input 230 V. egree of protection IP 44. It can be used with MAXI - OP COMPOSI - OP CONROL - CONROL manifolds. RZ White Electrothermic Head with microswitch hermo-electric actuator to control each circuit through a room thermostat. It is provided with limit micro-switch, and it can be installed upside-down. isplay pin, removable cable for easy replacement. Input 230V and 24 V. egree of protection IP 44. It can be used with MAXI - OP COMPOSI - OP CONROL - CONROL manifolds. 25 code input price V $ /pc V + micro $ /pc V + micro $ /pc

27 CONROL Pre-assembled Manifold CONROL manifolds Ø 1 ¼ are made of brass, and they are used to distribute the pipes in rooms. hey are provided with on-off valves (suitable for electrothermic heads), micrometric lockshields with data labels to locate rooms, ball air vent valves and ball drain valves with hose nozzles and plugs, brackets with vibration-damping for polyethylene pipes Ø or Ø code Ø 14 code Ø 17 outlets price $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ 1, /pc $ 1, /pc $ 1, /pc OP CONROL Pre-assembled Manifold OP CONROL manifolds Ø 1 ¼ are made of brass, and they are used to distribute the pipes in rooms. hey are provided with self-cleaning measuring units heads), micrometric lockshields with data labels to locate rooms, ball air vent valves and ball drain valves with hose nozzles and plugs, brackets with vibration- code Ø 14 code Ø 17 outlets price $ /pc $ /pc $ /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 2, /pc Fittings used with CONROL and OP CONROL manifolds Ø 14 $ /pc Ø 17 $ /pc Ø 20 $ /pc 26

28 Fittings used with CONROL and OP CONROL manifolds Ø 14 $ /pc Ø 16 $ /pc Ø 20 $ /pc 2 hose nozzles and plugs. hey can be combined with manifold modules. Package: in pairs $ /pair pipes in rooms. hey are provided with on-off valves (suitable for electrothermic polyethylene pipes Ø Package: in pairs. code outlets price $ /pair $ /pair $ /pair Pair of Brackets to the wall with the manifold modules. Package: in pairs $ /pair Package: in pairs Ø 1 ¼ $ /pair It is made of brass, and it is provided with a metal ring to activate the self-cleaning $ /pair 27

29 NEW Components for Floor Acoustic Insulation 28

30 Acoustic Insulation Acoustic Mat Sound-absorbing mat made of elastic expanded dense polyethylene in rolls. It shall be laid under RZ radiant panels to increase the acoustic performance of the structural base. hickness 10 mm. ensity 30/33 kg/m³. hermal conductivity 0.04 W/m K. rample noise reduction 25 db. ynamic rigidity 43.0 MN/ m³. Size: h 1300 mm, l 50 m, th. 10 mm. Package: 65-m 2 roll $ 7.97 /m 2 Acoustic Adhesive ape Adhesive tape made of expanded polyethylene used to seal the sound absorbing layer (Acoustic mat). It is supplied in rolls of width 100 mm and thickness 3 mm. Size: h 100 mm, l 25 m, th. 3 mm. Package: 25-m roll $ 1.53 /m Acoustic Perimeter Belt Adhesive edge insulation made of expanded polyethylene with small cuts on the backside to adjust its height. It is equipped with a sheet made of expanded polyethylene, which shall be laid on the sound-absorbing mat. he main function insulation of the surface. Size: Adhesive edge: h 160 mm, th. 6 mm, l 50 m. Sound-absorbing sheet: h 120 mm, th. 2 mm, l 50 m. Package: 50-m roll $ 3.58 /m Acoustic oor Edge Adhesive belt made of expanded polyethylene, which shall be used in corners and wall edges. Size: h 160 mm, th. 6 mm. Base: l 40 mm. Package: 10 items $ 9.81 /pc 29

31 Underfloor Systems - Accessories Plus Perimeter Belt as thermo-acoustic insulation for the walls. It is made of expanded polyethylene with 100% closed-cell structure, and it is provided with an adhesive strip on one side, while on the other side it has a special polyethylene combined sheet in order the backside to adjust its height. hickness 5 mm, height 150 mm. Package: 50-m roll x150 mm $ 3.17 /m Open Elbow Ø 17 Open elbow Ø 17 made of plastic material. It is used to support the pipes near the manifolds vertically and to protect them from any damage. Package: 1 item Ø 17 mm - open $ 3.06 /pc Supporting Elbow Supporting elbow made of plastic material. It is used to support the pipes near the manifolds vertically and to protect them from any damage. Package: 1 item Ø 32 mm $ 3.88 /pc Ø 25 mm x pipe Ø 14 $ 3.47 /pc Fixing clips made of plastic material. hey are used to secure the pipe to the panel and to block the anti-shrinkage welded mesh. Package: 500 items $ 0.20 /pc 30

32 Accessories Hooked Clips Hooked clips made of plastic material. hey are used to secure the pipe to the insulating panels. Package: 100 items $ 0.22 /pc ape clips NEW systems with aluminized smooth panels and RZ CLIMA Ø pipe. Package: 250 items (25 items per row) $ 0.25 /pc its workability and improves its mechanical characteristics and thermal conductivity. It is a product which conforms to UNI EN 934-2/2002. osage 3 l/m³. Package: l l can $ /can l can $ /can l can $ /can Inibitor XR 20 his additive is used for heating systems. It is the inhibiting treatment which is used to prevent encrustations on metal parts. It can be employed in systems with scraps. It controls the microbiological growth, and it is suitable for every kind of system. osage: 2% of the quantity of water in the system. Package: 3-10 l l can $ /can l can $ /can Sheet for Humidity Barrier Polyethylene sheet, thickness 0.18 mm. It is characterized by RZ blue trademarks. It should be laid under the insulating panel, and it acts as a humidity barrier. Package: custom-made. Package: 100-m 2 roll. Also available in 100-m 2 rolls th 0,18 mm $ 2.86 /m m - th 0.18 mm $ 2.66 /m 2 31

33 Anti-Shrinkage Mesh With High Adherence High-adherence mesh made of zinc-plated steel, with anti-shrinkage and reinforcing function for concrete. It is made up of wires of Ø 2 mm and single meshes 75x75 mm. Package: 20 sheets 1x2 m (40 m 2 ) mesh 75x75 mm $ 6.33 /m 2 Sheet size: 1000x2000 mm. Single Mesh: 40x70 mm. Package: 20 sheets (40 m 2 ) mesh 40x70 mm $ 5.03 /m 2 used as thermal insulation. In rolls of width 2 m. Package: 100-m roll th. 5 mm $ 6.86 /m 2 ilation Joint ilation joint with adhesive base made of expanded polyethylene. It is ideal to cut the concrete, for example, at the doorway, in order to guarantee the right dilation. Its upper part shall be leveled out once the screed is ready. Size: h 100 mm, th. 8.5 mm, l 2000 mm. Package: 10 m $ /m 32

34 33 2

35 ry System 34

36 ry System Underfloor System - ry Panel ry Panel ry panel with reliefs made of sintered polystyrene, produced in conformity with UNI EN It is a waterproof panel with a closed-cell structure, which has high mechanical resistance. hermal conductivity W/(m K), total thickness 25 mm. hese panels have a moulded surface with special grooves so that the Spacing of mm. Package: 10 m² (16 pieces). 3 code size mm price x560x10 $ /m RY Panel Pipe PE-Xc Perimeter Belt 1 st layer zinc-plated steel plates 2 nd layer zinc-plated steel plates with adhesive Polyethylene sheet hermal diffusers Specifications (UNI EN 13163) RY PANEL code Flooring Ceramic, Parquet Marble, Wood, Brick Necessary thickness 4-5 cm 5-7 cm FEAURES hermal conductivity 10 C Compressive strength 10% Compressive strength 5% Compressive strength 2% hermal resistance Equivalent total thickness emperature limit (UNI EN 12667) (UNI 826) (UNI 826) (UNI 826) (UNI EN 13163) (UNI EN 1264/3) W/(m K) 150 kpa -- kpa -- kpa 0.55 (m 2 k)/w 19.6 mm 80 C SIZE Length Width Insulating thickness Nominal thickness Package (UNI 822) (UNI 822) (UNI 823) mm 1120 mm 560 mm 10 mm 25 panels n. 16 (10 m 2 ) 35

37 RZ Clima PE-Xc Ø 14 RZ Clima PE-Xc pipe Ø 14 is made of high-density electro-physically cross-linked polyethylene with anti-oxygen barrier according to UNI EN ISO and IN 4726, which guarantees even and stable cross-links and constant characteristics over time. iameter 14 mm - hickness 2 mm Ø m 300 $ 2.00 /m hermal iffusers Ø 14 hermal diffusers are made of zinc-plated steel, thickness 0.4 mm. hey are used to contain PE-Xc pipe Ø mm and act as heat transfer. Size: 990 mm x 122 mm; groove: 14 mm. Package : 40 items x122 mm $ 7.76 /pc Zinc-Plated Steel Plates Zinc-plated steel plates, thickness 1 mm, with or without adhesive, to produce the not be lined up. Sheet of 250x500 without adhesive (package: 20 items, 2.5 m 2 ). Sheet of 500x500 with or without adhesive (package: 10 items, 2.5 m 2 ) x500 $ /m x500 $ /m x500 + adhesive $ /m 2 OP COMPOSI Pre-assembled Manifold See description page 24. code Ø 14 outlets price $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ 1, /pc 36

38 ry System Sheet for Humidity Barrier Polyethylene sheet, thickness 0.18 mm. It is characterized by RZ blue trademarks. It should be laid under the insulating panel, and it acts as a humidity barrier. Package: custom-made. Package: 100-m 2 roll. Plus Perimeter Belt Also available in 100-m 2 rolls th 0.18 mm $ 2.86 /m m - th 0.18 mm $ 2.66 /m 2 as thermo-acoustic insulation for the walls. It is made of expanded polyethylene with 100% closed-cell structure, and it is provided with an adhesive strip on one side, while on the other side it has a special polyethylene combined sheet in order the backside to adjust its height. hickness 5 mm, height 150 mm. Package: 50-m roll x150 mm $ 3.17 /m 3 Supporting Elbow Supporting elbow made of plastic material. It is used to support the pipes near the manifolds vertically and to protect them from any damage. Package: 1 item Ø25 mm for pipe Ø14 $ 3.47 /pc 37

39 Bio System Natural Panel Swiss sawmills with no additional chemical glue. otal insulating thickness mm. Package: 5 m² (8 items) x600x21/22 mm $ /pack 38

40 Bio System Perforated Panel spacing of 8.3 cm or multiples, thickness 3 mm. Package: 9 m² (10 items) x747x3 mm $ /pack Waterproof Paper Waterproof paper used as humidity barrier to protect the insulating layer, density 160 g/m 2. Package: 100-m 2 roll m x 100 mm $ /pack RZ BIO Perimeter Belt Package: 25 m $ /pack Panel Clip Clip made of plastic material. It is used to secure perforated panels. Package: 50 items $ 1.23 /pc Pipe Clip Pipe clip made of plastic material. It is used to secure RZ CLIMA pipes to the perforated panels. Package: 100 items $ 0.41 /pc NOE: IN ORER O COMPLEE HE SYSEM I IS NECESSARY O USE RZ-CLIMA PIPES 17-13, MANIFOLS, ELBOWS, AN ANY ACCESSORIES USE IN HE OHER UNERFLOOR SYSEMS. 39

41 Industrial System PIPE Ø 20 RZ Clima PE-Xc Pipe Ø 20 RZ Clima PE-Xc pipe Ø 20 is made of high-density cross-linked polyethylene, provided with anti-oxygen barrier according to UNI EN ISO and IN 4726, which guarantees even and stable cross-links and constant characteristics over time. iameter 20 mm - hickness 2 mm Ø m 240 $ 3.76 /m Ø m 600 $ 3.76 /m 40

42 Industrial Shaped Panel 20 CONROL Pre-assembled Manifold code size equivalent tot. thick. mm thermal conductivity W/(m K) thermal resistance* (m 2 K)/W Industrial System Industrial panel with reliefs, made of waterproof moulded expanded polystyrene (according to UNI EN 13163), with closed-cell structure and high mechanical resistance. hermal conductivity W/(m K), insulating thickness 20 mm, total thickness 47 mm, equivalent total thickness 26.4 mm, thermal resistance according to UNI EN (m² K)/W. hese panels have a tongue along the perimeter to connect them for proper alignment. hey have a moulded surface with reliefs of 27 mm, so that the cross-linked polyethylene pipes (Ø 20 mm) can m 2 (20 items). price x837x $ /m 2 *UNI EN CONROL manifolds Ø 1 ¼ are made of brass, and they are used to distribute pipes in rooms. hey are provided with shut-off valves (suitable for electrothermic heads), micrometric lockshield valve with data labels to locate rooms, ball air vent valves and ball waste valves with hose nozzles and plugs, brackets with vibration- code Ø 20 outlets price $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ 1, /pc $ 1, /pc $ 1, /pc 5 OP CONROL Pre-assembled Manifold OP CONROL manifolds Ø 1 ¼ are made of brass, and they are used to distribute pipes in rooms. hey are provided with self-cleaning measuring units heads), micrometric lockshield valve with data labels to locate rooms, ball air vent valves and ball waste valves with hose nozzles and plugs, brackets with vibration- 41 code Ø 20 outlets price $ /pc $ /pc $ /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 2, /pc

43 Wall Cabinet Cabinet for wall installation. It is made of steel painted with powders, thickness 20 cm, height 80 cm. It is open on the back, and it has dead holes for side entrances and a white metal door painted with powders and lockset. It is placed once the installation has been completed. Package: 1 item x80x20 cm (Manifolds up to 10 outlets) x80x20 cm (Manifolds from 11 to 13 outlets) $ /pc $ /pc Extruded Smooth Insulating Panel Extruded smooth insulating panel made of expanded polystyrene, produced with ecological gas, without CFC and HCFC, according to the European regulations EC E. Compressive strength with 10% of deformation according to EN kpa. Insulating thickness mm. hermal conductivity W/(m K). Package for 30-mm thick version: m 2 (14 items). Package for 40-mm thick version: 7.50 m 2 (10 items). code size equivalent tot. thick. mm thermal conductivity W/(m K) thermal resistance* (m 2 K)/W price x600x $ /m x600x $ /m 2 *UNI EN Modulbarra Modular metal bar with holes, which is used to hold duoclips. hey function as support for pipes, and make it possible to use the same 8.3-cm spacing as in the other systems by RZ. It is an ideal solution for industrial systems. Bar length 2 m. Package: 2 m m $ 6.54 /m Supporting Bars for Pipes Ø 20 NEW polyethylene sheet with or without the insulating panel. Spacing: 50 mm. Size: l 4000 mm, h 25 mm, d 50 mm. Package: 4-m bar m $ 7.15 /m 42

44 Industrial System Industrial Perimeter Belt channels in the walls. It is made of expanded polyethylene with 100% closed cell structure, and it has an adhesive strip on one side. hickness 10 mm, height 250 mm. Package: 50-m rolls x250 mm $ 5.07 /m Supporting Elbows Supporting elbows made of plastic to support the pipes near the manifolds vertically, and to protect them from any damage. Package: 1 item Ø 32 mm $ 3.88 /pc uoclips 5 uoclips made of plastic to secure the pipe to Modulbarra or to the welded mesh Ø 5 mm. Package: 500 items mm $ 0.47 /pc mm $ 0.47 /pc Industrial Clips 20/6 and 20/3 Fixing clips for pipes Ø 20 mm made of plastic to support the pipe with the welded mesh Ø 6 mm or Ø 3 mm. he single meshes should correspond to the spacing between the pipes. Package: 100 items Ø 20 mm x 6 mm $ 0.47 /pc Ø 20 mm x 3 mm $ 0.47 /pc Clips of 40 mm panels. Package: 100 items $ 0.25 /pc 43

45 Hooked Clips Hooked clips made of plastic, and used to secure the pipe to the panel. Package: 100 items $ 0.22 /pc Sheet made of polyethylene, thickness 0.18 mm, with RZ blue trademarks. It is laid under the insulating panel, and it acts as a humidity barrier. Package: custom-made. Package: 100-m² rolls. Also in rolls of 100 m th mm $ 2.86 /m m - th mm $ 2.66 /m 2 used for thermal insulation. Height: 2 m. Package: 100-m rolls th. 5 mm $ 6.86/m 2 Pipe Band Pipe bands made of plastic, and used to block pipes in industrial systems Package: 100 items cm $ 0.16 /pc Joint Sleeve Joint sleeve made of polypropylene, diameter 28 mm, length 300 mm, ideal to protect expansion joints. Package: 100 items L Ø 28 mm $ 2.25 /pc 44

46 sistema Industry PIPE Ø 25 Industry System 5 45

47 RZ Clima PE-Xa Pipe Ø 25 RZ Clima PE-Xa pipe Ø 25 is made of high-quality polyethylene with crosslinking produced through a typology method, provided with anti-oxygen barrier according to UNI EN ISO and IN 4726, which guarantees even and stable cross-links and constant characteristics over time. iameter 25 mm - hickness 2.3 mm Ø m 200 $ 5.52 /m Ø m 600 $ 5.52 /m Extruded Smooth Insulating Panel Extruded smooth insulating panel made of expanded polystyrene, produced with ecological gas, without CFC and HCFC, according to the European regulations EC E. Compressive strength with 10% of deformation according to EN kpa. Insulating thickness mm. hermal conductivity W/(m K). Package for 30-mm thick version: m 2 (14 items). Package for 40-mm thick version: 7.50 m 2 (10 items). code size equivalent tot. thick mm thermal conductivity W/(m K) thermal resistance* (m 2 K)/W price x600x $ /m x600x $ /m 2 *UNI EN Industry Manifold Industry manifold made of stainless steel Ø 2, used to distribute pipes Ø 25 mm in warehouses. It includes shut-off ball valves and registers, an air and load cock, code outlets price $ 1, /pc $ 1, /pc $ 1, /pc $ 2, /pc $ 2, /pc $ 2, /pc $ 2, /pc $ 3, /pc $ 3, /pc $ 3, /pc $ 3, /pc 46

48 Industry System Industry Brackets Pair of brackets made of zinc-plated steel, provided with rings and vibrationdamping packing Ø 2 $ /pair Pair of Valves Shut-off ball valves and registers, used for Industry System manifolds $ /pair Industrial Perimeter Belt channels in the walls. It is made of expanded polyethylene with 100% closed-cell structure, and it has an adhesive strip on one side. hickness 10 mm, height 250 mm. Package: 50-m rolls x250 mm $ 5.07 /m Industry Elbow Plastic elbow for pipes Ø 25 mm, used to support pipes near the manifolds vertically $ 7.56 /pc Sheet for Humidity Barrier Sheet made of polyethylene, thickness 0.18 mm, with RZ blue trademarks. It is laid under the insulating panel, and it acts as a humidity barrier. Package: custom-made. Package: 100-m² rolls. Also in rolls of 100 m th mm $ 2.86 /m m - th 0.18 mm $ 2.66 /m 2 47

49 used for thermal insulation. Height: 2 m. Package: 100-m rolls th. 5 mm $ 6.86 /m 2 Pipe Band Pipe bands made of plastic, and used to block pipes in industrial systems Package: 100 items cm $ 0.16 /pc Supporting Bars for Pipe Ø 25 NEW on the extruded smooth insulating panels. Spacing: 100 mm. Size: l 4000 mm, h 35 mm, d 50 mm. Package: 4-m bar m $ /m Clips of 40 mm panels. Package: 100 items $ 0.25 /pc Clips Industry Fixing clips made of plastic for pipes Ø 25 mm, used to support the pipe on the welded mesh Ø 6. he single meshes should correspond to the spacing between the pipes. Package: 100 items Ø 25 mm x 6 mm $ 0.47 /pc 48

50 Industry System Plastic block to prevent panels from moving during pipe installation. Package: 50 items $ 0.41 /pc Joint Sleeve Joint sleeve made of polypropylene Ø 40 mm, length 500 mm. It is ideal to protect expansion joints. Package: 10 items L Ø 40 mm $ 2.45 /pc 5 49

51 Accessories for RZ Systems Movable Electric Boiler NEW Movable electric boiler on a trolley, used to dry concrete in building sites. Output power up to 13 kw. It is equipped with temperature units. he movable electric boiler can be used in a very easy, rapid Power supply at 400 V or 220 V (with adapter), provided with 3 electric resistors of kw respectively net price $ 2, /pc Plug for Adapter with Single-phase Electric Power 220 V Adapter connection 220 V to use the movable electric boiler. With this tension the boiler can work just by using 3-kW resistor net price $ /pc 50

52 Accessories Unwinder Unwinder made of tropicalized steel, provided with ball bearings to guarantee optimal rotation. It is adjustable according to the dimensions of the roll. It can be completely disassembled, and it is ideal for 600-m rolls $ /pc with tape clips (code ). NEW $ /pc Pipe Cutter Pipe cutter made of plastic material. Package: 1 item Ø 28 $ /pc 51

53 Superwash SWR 20 Superwash SWR 20 is the treatment to remove sludge made up of residual corrosion products in heating systems. It can be used in systems with aluminium components too. After using it, please, empty out the system and rinse it out until the water is clear. osage: 2% of the quantity of water in the system. Package: 3-10 l L can $ /can L can $ /can Antifreezing additive with inhibiting treatment to control corrosions, encrustations and the microbiological growth in every kind of heating system, included those systems containing alluminium components. PROEC - NO FREEZE can be employed with any type of soft or hard water. It is a colourless product with low toxicity, which is easy to use. Physical properties: he dosage of PROEC - NO FREEZE depends on the level of protection against cold: Package: 20-l L can $ /can Male Straight Coupling Package: 1 item Ø ½ x $ 6.13 /pc Ø ½ x $ 9.19 /pc Ø ¾ x $ /pc Package: 1 item Ø $ /pc Ø $ /pc Ø $ /pc Ø $ /pc 52

54 Accessories shall be used with M 56 pliers. Package: 1 item Ø $ /pc Ø $ /pc Ø $ /pc Reductions for Manifold Brass reduction Ø 1 ¼ - ¾. Brass reduction Ø 1 ¼ Ø 1 ¼ - ¾ $ 8.17 /pc Ø 1 ¼ - 1 $ 9.19 /pc Pair of Valves Ø ½ x $ /pair Ø ½ x $ /pair Ø ½ x $ /pair 6 Closing Plug for Manifold Cap disc for CONROL and OP CONROL manifolds. Package: 1 item $ 7.97 /pc Air trap Air trap made of brass for air venting from the system. It is compulsory in b!klimax system, and it is recommended in the other systems. FF (female-female) pipe connections. Flowrate* m 3 /h Ø ¾ $ /pc Ø 1 $ /pc Ø 1 ¼ $ /pc Ø 1 ½ $ /pc Ø 2 $ /pc 53

55 ClimaWall System Wall Module Pre-assembled wall modules are made of random polypropylene, and they consist of 2 MF (male-female) manifolds, connected to each other through 6 pipes of Ø 10 mm. Width of the modules: 30 cm; possible combination by polyfusion welding. Package: 1 item m $ /pc m $ /pc m $ /pc modules. Package: 20 items cm $ 5.52 /pc Bar Pipe Climawall piping is made of PPR random polypropylene, Ø in 4-m bars, and it is used for the connection between manifolds and wall modules. Package: 40 m m $ 4.00 /m 54

56 ClimaWall System Package: 10 items Ø 20 $ 4.09 /pc Package: 10 items Ø 20 $ 4.09 /pc Package: 10 items Ø 20 $ 4.09 /pc 7 Package: 10 items Ø 20 $ 4.09 /pc Support Sleeve Brass support sleeve. It shall be placed in PPR pipes Ø in order to prevent them from being obstructed, while you are welding. Package: 10 items $ 1.84 /pc 55

57 hermoregulation Kit MR Modules MRC Modules 56

58 hermoregulation Kit hermoregulation Kit Kit Compact Advantages: Example of application/purchase: 8 57

59 hermoregulatio Kit NEW KI COMPAC PF-C New KI COMPAC PF-C for distribution and set-point regulation. It includes a single thermoplastic block from highly innovative technology, made up of a mixing valve and a thermostatic head with temperature range installations. KI COMPAC PF-C also contains unidirectional valve, shut-off valves, thermometers, balancing lockshield valve valves, electronic safety thermostat, thermoplastic air trap, and thermoplastic OP COMPOSI manifolds Ø 1 13, connector for electric installation and wired system. In addition, it incudes a metal cabinet with adjustable mounts, brackets, a protective cover and white door with adjustable frame and lockset. systems are OP COMPOSI models (high-temperature included and shall be ordered separately). pipeø14 pipe ø17 KI PF size COMPAC C lxhxd (cm) price outlets 75x85 91x14 $ 2, /pc outlets 75x85 91x14 $ 2, /pc outlets 75x85 91x14 $ 2, /pc outlets 75x85 91x14 $ 2, /pc outlets 90x85 91x14 $ 2, /pc outlets 90x85 91x14 $ 2, /pc outlets 90x85 91x14 $ 2, /pc outlets 110x85 91x14 $ 2, /pc outlets 110x85 91x14 $ 2, /pc outlets 110x85 91x14 $ 3, /pc Pair of manifolds made of brass diam. ¾, equipped with on-off control knob, distance between outlets 45 mm, with outlets ¾ Eurocone for the connection of Pex, multilayer or copper pipes. Electrothermic heads can be applied on the manifolds. hey are available with 1 to 3 outlets, and they can be installed with no outlet $ /pc outlets $ /pc outlets $ /pc Compact mixing group made of thermoplastic material with electronic circulation circuits. his accessory shall be ordered in combination with KI COMPAC PF as an optional alternative component. Package: 1 item extra $ /pc 58

60 hermoregulation Kit Cabinet made of zinc-plated sheet metal, thickness 8/10, including ball shut-off valves and copper pipe with tail pieces for the installation of COMPAC mixing group. he cabinet includes guides for the instalaltion of low-temperature manifolds, CONROL or OP COMPOSI versions, circulation pump and COMPAC mixing group cm 75 (Kit Compact up to 6+6 outlets) cm 90 (Kit Compact from 7+7 to 9+9 outlets) cm 110 (Kit Compact from to 12 outlets) $ /pc $ /pc $ /pc hermoplastic manifold Ø 1 used to distribute pipes in rooms. It is provided with air crystal display, shut-off valves (suitable for thermo-electric actuators), micrometric and ball drain valves with hose nozzles and plugs, brackets to be installed into the cabinet, and push- polyethylene pipes Ø mm or Ø mm. Max operating pressure: 4 bar. emperature range: code Ø 14 code Ø 17 outlets price $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ /pc $ 1, /pc $ 1, /pc $ 1, /pc hermoplastic single block from highly innovative technology, including a mixing valve systems. COMPAC PF-C mixing group also contains unidirectional valve, balancing lockshield valve with closing by-pass for primary circuit, electronic safety thermostat, wired system and connector to the electric installation and to the room thermostat. COMPAC PF-C group contains copper pipes for the connection with the cabinet and with OP COMPOSI manifolds, therefore it can be installed into the cabinet once the NOE: suitable for OP COMPOSI manifolds. 8 code price electronic circulation $ 1, /pc speed circulation $ 1, /pc White steel door painted with powders with lockset and adjustable frame for KI COMPAC cabinets cm 75 (Kit Compact up to 6+6 outlets) cm 90 (Kit Compact from 7+7 to 9+9 outlets) cm 110 (Kit Compact from to 12 outlets) $ /pc $ /pc $ /pc 59

61 hermoregulation Kit NEW KI COMPAC PF-O New KI COMPAC PF-O for distribution and set-point regulation. It includes a single thermoplastic block from a highly innovative technology, made up of a mixing valve and a thermostatic head with temperature range and high-temperature instalallations. KI COMPAC PF-O also contains unidirectional valve, shut-off valves, thermometers, balancing lockshield valve with closing by-pass for primary circuit, thermoplastic air trap, and brass CONROL manifolds Ø 1 1/4 for RZ CLIMA pipe Ø , connector for electric installation and wired system. In addition, it incudes a metal cabinet with adjustable mounts, brackets, a protective cover and white door with adjustable frame and lockset. systems are CONROL models (high-temperature included and shall be ordered separately). pipeø14 pipe ø17 pipe ø20 KI COMPAC size PF-O lxhxd(cm) price outlets 75x85 91x14 $ 2, /pc outlets 75x85 91x14 $ 2, /pc outlets 75x85 91x14 $ 2, /pc outlets 90x85 91x14 $ 2, /pc outlets 90x85 91x14 $ 2, /pc outlets 90x85 91x14 $ 2, /pc outlets 110x85 91x14 $ 3, /pc outlets 110x85 91x14 $ 3, /pc outlets 110x85 91x14 $ 3, /pc outlets 110x85 91x14 $ 3, /pc Pair of manifolds made of brass diam. ¾, equipped with on-off control knob, distance between outlets 45 mm, with outlets ¾ Eurocone for the connection of Pex, multilayer or copper pipes. Electrothermic heads can be applied on the manifolds. hey are available with 1 to 3 outlets, and they can be installed with no outlet $ /pc outlets $ /pc outlets $ /pc Compact mixing group made of thermoplastic material with electronic circulation circuits. his accessory shall be ordered in combination with KI COMPAC PF as an optional alternative component. Package: 1 item extra $ /pc 60

62 hermoregulation Kit Cabinet made of zinc-plated sheet metal, thickness 8/10, including ball shut-off valves and copper pipe with tail pieces for the installation of COMPAC mixing group. he cabinet includes guides for the instalaltion of low-temperature manifolds, CONROL or OP COMPOSI versions, circulation pump and COMPAC mixing group cm 75 (Kit Compact up to 5+5 outlets) cm 90 (Kit Compact from 6+6 to 8+8 outlets) cm 110 (Kit Compact from 9+9 to 12 outlets) $ /pc $ /pc $ /pc Brass manifolds Ø 1 ¼ used to distribute pipes in rooms. hey include air trap and shut-off valves (suitable for thermo-electric actuators), micrometric lockshield valves with data labels to locate rooms, ball air vent valves and ball drain valves with hose polyethylene pipes Ø 17-13, Ø or Ø mm. Max. operating pressure: 6 bar. code Ø 14 code Ø 17 code Ø 20 outlets price $ /pc $ /pc $ /pc $ /pc $ /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 1, /pc $ 1, /pc hermoplastic single block from highly innovative technology, including a mixing heating systems. COMPAC PF-O mixing group also contains unidirectional valve, balancing lockshield valve with closing by-pass for primary circuit, electronic safety thermostat, wired system and connector to the electric installation and to the room thermostat. COMPAC PF-O group contains copper pipes for the connection with the cabinet and with CONROL manifolds, therefore it can be installed into the cabinet NOE: suitable for CONROL manifolds. 8 code price electronic circulation $ 1, /pc speed circulation $ 1, /pc White steel door painted with powders with lockset and adjustable frame for KI COMPAC cabinets cm 75 (Kit Compact up to 5+5 outlets) cm 90 (Kit Compact from 6+6 to 8+8 outlets) cm 110 (Kit Compact from 9+9 to 12 outlets) $ /pc $ /pc $ /pc 61

63 hermoregulation Kit Heating and cooling climatic regulation with optional temperature/humidity sensor KI CONROL - CLIMA UPLEX Kit for distribution and regulation, CONROL-CLIMA UPLEX version, with double It includes: a metal cabinet with adjustable feet, brackets, a protective cover, a white door with adjustable frame and lockset, CONROL manifolds, a three-way mixing valve, a synchronous, reversible motor, a three-speed circulation pump, a micrometric lockshield valve, a unidirectional valve, shut-off valves, thermometers, a balancing lockshiled valve, two-way manifolds for high-temperature circuits electric thermostat, an air trap, and a connector to the electrical installation and a wired system. It also contains a Proportional-Integral climatic electric unit to control parameters, a liquid crystal display, manual commutation from winter running to summer running and vice versa. An optional element is the sensor to control room temperature or the combined sensor to control room temperature and humidity. In the version with the sensor for temperature/humidity (RU), the electric unit sets and Anticondensation insulation for kit he anticondensation insulation is used for each component which can be in contact with cool water at low temperature. It is recommended for summer cooling systems $ /pc pipeø14 pipe ø17 pipe ø20 KI size Control - Clima lxhxd (cm) price duplex 3 65x83 89x13 $ 5, /pc duplex 4 65x83 89x13 $ 5, /pc duplex 5 65x83 89x13 $ 5, /pc duplex 6 80x83 89x13 $ 5, /pc duplex 7 80x83 89x13 $ 5, /pc duplex 8 80x83 89x13 $ 5, /pc duplex 9 100x83 89x13 $ 5, /pc duplex x83 89x13 $ 5, /pc duplex x83 89x13 $ 5, /pc duplex x83 89x13 $ 5, /pc 62

64 hermoregulation Kit ACCESSORIES FOR KI CONROL - CLIMA UPLEX - emperature Sensor Sensor for room temperature for wall installation. It includes a regulation potentiometer, and it can be combined with KI CONROL-CLIMA UPLEX. Package: 1 item $ /pc - emperature / Humidity Sensor Sensor for room temperature and humidity for wall installation. It displays and controls the condition of the air in the room with summer cooling. It can be combined with KI CONROL-CLIMA UPLEX. Package: 1 item $ /pc N. 3 High-emperature Outlets Manifold with on-off control knob Ø ¾ (Male-Female), distance between the outlets of 45 mm, with Eurocone outlets Ø ½ for every kind of adapter. hermoelectric actuators can be applied on the manifold. Available for kit with 3 to 11 outlets. Package: 1 item extra $ /pc 8 Circulation Pumps Wilo variable speed $ /pc Grundfoss 25/55 3 Speed $ /pc Magna 25/100 $ /pc Pump Cap Union Nut BA 63

65 hermoregulation Kit KI PF UPLEX Kit for distribution and regulation, PF UPLEX version, with a high-temperature system with a closing by-pass for the primary circuit. It includes: a zinc-plates steel cabinet with adjustable feet, brackets, a protective cover, a white door with adjustable frame and lockset, CONROL manifolds, a three-way mixing valve with thermostatic control, temperature pump, a micrometric lockshield valve, a unidirectional valve, shut-off valves, thermometers, a balancing lockshiled valve, two-way manifolds for high-temperature circuits (suitable for safety electric thermostat, an air trap, and a connector to the electrical installation and a wired system. pipe pipe pipe size KI ø14 ø17 ø20 lxhxd (cm) price PF duplex 3 65x83 89x13 $ 2, /pc PF duplex 4 65x83 89x13 $ 2, /pc PF duplex 5 65x83 89x13 $ 2, /pc PF duplex 6 80x83 89x13 $ 2, /pc PF duplex 7 80x83 89x13 $ 3, /pc PF duplex 8 80x83 89x13 $ 3, /pc PF duplex 9 100x83 89x13 $ 3, /pc PF duplex x83 89x13 $ 3, /pc PF duplex x83 89x13 $ 3, /pc PF duplex x83 89x13 $ 3, /pc ACCESSORIES FOR KI PF UPLEX N. 3 High-emperature Outlets Manifold with on-off control knob Ø ¾ (Male-Female), distance between the outlets of 45 mm, with Eurocone outlets Ø ½ for every kind of adapter. hermoelectric actuators can be applied on the manifold. Available for kit with 3 to 11 outlets. Package: 1 item extra $ /pc Circulation Pumps Wilo variable speed $ /pc Grundfoss 25/55 3 Speed $ /pc Magna 25/100 $ /pc Pump Cap Union Nut BA 64

66 hermoregulation Kit hermoregulation Kit WIH ANALOGUE SERVOMOOR 0-10 KI VJ 0-10 UPLEX Kit for distribution and regulation, VJ 0-10 UPLEX version, high-temperature systems. It includes: a metal cabinet with adjustable feet, brackets, a protective cover, a white door with adjustable frame and lockset, CONROL manifolds, a three-way mixing valve, an analogue motor 0-10, a threespeed circulation pump, a micrometric lockshield valve, a unidirectional valve, shut-off valves, thermometers, a balancing lockshiled valve, two-way manifolds for high-temperature circuits (suitable for thermo-electric actuators), vent valves and connector to the electrical installation and a wired system. It can be combined with EVO or Wi controllers. Anti-condensation insulation for kit he anticondensation insulation is used for each component which can be in contact with cool water at low temperature. It is recommended for summer cooling systems $ /pc pipe pipe pipe size KI price ø14 ø17 ø20 lxhxp (cm) VJ 0-10 duplex 3 65x83 89x13 $ 3, /pc VJ 0-10 duplex 4 65x83 89x13 $ 3, /pc VJ 0-10 duplex 5 65x83 89x13 $ 3, /pc VJ 0-10 duplex 6 80x83 89x13 $ 3, /pc VJ 0-10 duplex 7 80x83 89x13 $ 3, /pc VJ 0-10 duplex 8 80x83 89x13 $ 3, /pc VJ 0-10 duplex 9 100x83 89x13 $ 3, /pc VJ 0-10 duplex x83 89x13 $ 3, /pc VJ 0-10 duplex x83 89x13 $ 4, /pc VJ 0-10 duplex x83 89x13 $ 4, /pc ACCESSORIES FOR KI VJ 0-10 UPLEX N. 3 High-emperature Outlets Manifold with on-off control knob Ø ¾ (Male-Female), distance between the outlets of 45 mm, with Eurocone outlets Ø ½ for every kind of adapter. hermoelectric actuators can be applied on the manifold. Available for kit with 3 to 11 outlets. Package: 1 item extra $ /pc 8 Circulation Pumps Wilo variable speed $ /pc Grundfoss 25/55 3 Speed $ /pc Magna 25/100 $ /pc Pump Cap Union Nut BA 65

67 hermoregulation Kit KI PF SIMPLEX Kit for distribution and regulation, PF SIMPLEX version, is adjustable feet, brackets, a protective cover, a white door with adjustable frame and lockset, CONROL manifolds, a three-way mixing valve with thermostatic control, a circulation pump, shut-off valves, thermometers, vent valves and a wired system. pipe pipe pipe size KI ø14 ø17 ø20 lxhxp (cm) price PF simplex 3 65x83 89x13 $ 2, /pc PF simplex 4 65x83 89x13 $ 2, /pc PF simplex 5 65x83 89x13 $ 2, /pc PF simplex 6 80x83 89x13 $ 2, /pc PF simplex 7 80x83 89x13 $ 2, /pc PF simplex 8 80x83 89x13 $ 2, /pc PF simplex 9 100x83 89x13 $ 2, /pc PF simplex x83 89x13 $ 3, /pc PF simplex x83 89x13 $ 3, /pc PF simplex x83 89x13 $ 3, /pc OPIONAL PER KI PF SIMPLEX Circulation Pumps Wilo variable speed $ /pc Grundfoss 25/55 3 Speed $ /pc Magna 25/100 $ /pc Pump Cap Union Nut BA 66

68 MR Modules MR Modules MR modules by RZ Aare small pre-assembled thermal units which are able to control system with radiant panels and radiators. Heat Pump (as alternative) BOILER CHILLER Radiator Approximate hydraulic diagram for MR Control-Clima. zone 1 (living area) zone 2 (sleeping area) EHUMIIFIER EHUMIIFIER 8 Zona 1 Underfloor Zona 2 Underfloor 67

69 MR Modules MR Control - Clima MR CONROL-CLIMA module is a pre-assembled mini-thermal unit, which is used feet, made of steel painted with powders, brackets, a white door with lockset, a three-way mixing valve with integrated by-pass, a synchronous, reversible motor, a small climatic electric unit for summer/winter with microprocessor, check valves, a micrometric balancing lockshield valve, ball valves with tail pieces, thermometers with scale labels, a MAGNA electric circulation pump with variable pressure connector to the electrical system and a wired system both for low-temperature zone valves and high-temperature thermo-electric actuators $ 6, /pc 176 mm 603 mm Anti-condensation insulation he anticondensation insulation is used for each component which can be in contact with cool water at low temperature. It is recommended for summer cooling systems mm $ /pc ACCESSORIES FOR MR CONROL - CLIMA Module for hydraulic connection of the water chiller, an optional element which is suitable for MR CONROL-CLIMA. his module enables easy commutation from winter running to summer running and vice versa. It is made of copper and it has 2 ball valves Ø ¾ to connect the chiller. Circulation Pumps $ /pc Wilo variable speed $ /pc Grundfoss 25/55 3 Speed $ /pc Magna 25/100 $ /pc Pump Cap Union Nut BA 68

70 MR Modules MR Modules MR PF module is a pre-assembled mini-thermal unit, which is used to regulate of steel painted with powders, brackets, a white door with lockset, a three-way only), check valves, a micrometric balancing lockshield valve, ball valves with tail pieces, thermometers with scale labels, a MAGNA electric circulation electronic thermostat, a connector to the electrical system and a wired system both for low-temperature zone valves and high-temperature thermo-electric actuators $ 4, /pc 176 mm 603 mm 1155 mm 8 ACCESSORIES FOR MR PF Circulation Pumps Wilo variable speed $ /pc Grundfoss 25/55 3 Speed $ /pc Magna 25/100 $ /pc Pump Cap Union Nut BA 69

71 MR Modules MR VJ 0-10 With analogue servomotor 0-10 MR VJ 0-10 module is a pre-assembled mini-thermal unit, which is used to feet, made of steel painted with powders, brackets, a white door with lockset, a three-way mixing valve with integrated by-pass, an analogue motor 0-10, check valves, a micrometric balancing lockshield valve, ball valves with tail pieces, thermometers with scale labels, a MAGNA electric circulation pump with thermostat, a connector to the electrical system and a wired system both for lowtemperature zone valves and high-temperature thermo-electric actuators. It can be combined with RZ EVO or Wi controllers $ 5, /pc 176 mm 603 mm 1355 mm Anti-condensation insulation he anticondensation insulation is used for each component which can be in contact with cool water at low temperature. It is recommended for summer cooling systems $ /pc ACCESSORIES FOR MR VJ 0-10 Module for hydraulic connection of the water chiller, an optional element which is suitable for MR CONROL-CLIMA. his module enables easy commutation from winter running to summer running and vice versa. It is made of copper and it has 2 ball valves Ø ¾ to connect the chiller. Circulation Pumps $ /pc Wilo variable speed $ /pc Grundfoss 25/55 3 Speed $ /pc Magna 25/100 $ /pc Pump Cap Union Nut BA 70

72 H2 High-emperature Module with 2 outlets MR Modules ACCESSORIES MR mod. PF - CONROL CLIMA - VJ Pair of manifolds made of brass, Ø ¾ with outlets. hey are suitable for electro $ /pair H3 High-emperature Module with 3 outlets Pair of manifolds made of brass, Ø ¾ with outlets. hey are suitable for $ /pair Electro-thermal Head RZ Black with microswitch hermo-electric actuator to control each circuit through a room thermostat. It is provided with limit micro-switch. Input 230 V. egree of protection IP 44. It can be used with OP COMPOSI - OP CONROL - CONROL manifolds and hightemperature outlets of KI and MR modules). Pair of Low-emperature Manifolds with 2 and 3 Outlets code alimentazione price V c/micro $ /pc Pair of copper manifolds, provided with tail pieces. hey are used to feed 2 or 3 zones at low temperature. code outlets price $ /pair $ /pair B2 Low-emperature Module for 2 zones 8 Module to control 2 zones at low temperature. It is provided with a pair of copper manifolds with outlets and 2 zone valves Ø 1, module VZR2, with tail pieces and relevant thermal actuators MVZ $ /pair B3 Low-emperature Module for 3 zones Module to control 3 zones at low temperature. It is provided with a pair of copper manifolds with outlets and 3 zone valves Ø 1, module VZR2, with tail pieces and relevant thermal actuators MVZ $ 1, /pair 71

73 MRC Modules Example of MRC - 1 and MRC - 2 application in a building with 5 72

74 MRC Modules MRC Module MRC-1 MOULE systems in one solution MRC-1 Module (1 zone) Pre-assembled module for summer/winter climatic regulation and metering Hydraulic module for regulation and control of the temperature and humidity systems, EVO.NE version, for heating and cooling running; it also he module contains all the necessary elements for regulation and safety and makes it possible to control the relative humidity in 1 zone in summer thanks to combined sensors for temperature and humidity (optional components). System data are controlled through a user s interface (IU), 1 hydraulic module is pre-assembled and pre-tested, and it includes a wired system. he module is also combined with an electronic device of power metering (for winter heating and summer cooling) with direct display of the data, which can be also provided with BUS cable connection with a data concentrator (optional component). Another optional element is represented by the volumetric meters for the domestic hot/cold water (output of impulses sending the data to the meter). he concentrator makes analogue or GSM modem. Size 650x850x190 mm. Weight Kg. MRC-1 Module code description price Cabinet and connection template for MRC $ 1, /pc MRC-1 Module $ 7, /pc Frame with door for MRC $ /pc A/H Sensor $ /pc Anti-condensation insulation MRC $ /pc 8 73

75 MRC Module MRC-2 MOULE systems in one solution MRC-2 Module (2 zones) Pre-assembled module for summer/winter climatic regulation and metering Hydraulic module for regulation and control of the temperature and for radiant systems, EVO.NE version, for heating and cooling running; it also includes a circuit for other heating elements (radiators) regulation and safety and makes it possible to control the relative humidity in 2 zones in summer thanks to combined sensors for temperature and humidity (optional components). System data are controlled through a and setting. MRC-2 hydraulic module is pre-assembled and tested, and it includes a wired system. he module is also combined with an electronic device of power metering (for winter heating and summer cooling) with direct display of the data, which can be also provided with BUS cable connection with a data concentrator (optional component). Another optional element is represented by the volumetric meters for the domestic hot/cold water (output of impulses sending the data to the meter). he concentrator makes it possible to control the meter and the consumption MRC-2 Module code description price Cabinet and connection template for MRC $ 1, /pc MRC-2 Module $ 7, /pc Frame with door for MRC $ /pc A/H Sensor (n 2) $ /pc Anti-condensation insulation MRC $ /pc Size 650x850x190 mm. Weight Kg. 74

76 MRC Modules MRC Modules Configuration MASER.NE Art $ 2, component name code description control max q.ty price total It controls up to 64 central units connected with.ne modality MA- SER Control Unit with Centralized hermal Production Kit Connectors 1 Outside Sensor 1 General Mean Water Sensor 1 Mixing Valve (general pre-mixing) 1 Chiller contact 1 Boiler contact 1 General Pump contact 1 SEASON contact 1 $1, $1, IU User Interface ata display and control 1 $ $ E Outside Sensor Outside temperature recording 1 $ $ M Mean Water Sensor Mean temperature recording 1 $ $ SO Clock Board ime programming 1 $ $ RS Serial Board RS485 ata reception and transmission through BUS cable 1 $ $ NOE: BUS cable used to connect the MASER.NE control unit to the peripheral devices is 1000 m long. OPIONAL COMPONENS of the MEERING system: ata concentrator: electronic device displaying the consumption of all controllers. he system can be controlled through a suitable software, which makes it possible to display the consumption data for each user $ 1, /pc 8 ele-data concentrator: electronic device which displays the consumption of all controllers by sending the data to a computer through a GSM or analogue modem $ 2, /pc Analogue modem: for the remote control of the data $ /pc for the remote control of the data $ 1, /pc 75

77 Evo/Wi/.NE Control Units 76

78 EVO Regulation CONENS EVO-SA Controllers - PAGE 78 EVO-SA Electronic regulation unit to control heating and cooling of a radiant system with independent power production. Wi-SA Controllers - PAGE 82 NEW Wi-SA Electronic regulation unit to control heating and cooling of a radiant system with independent power production. his controller can be combined with different versions of sensors to record room temperature and humidity, including the sensors with wireless technology..ne / EVO.NE / Wi.NE Controllers - PAGE 86 MASER.NE Climatic regulation unit to control a radiant system with centralized power production (in winter and in summer too). Master.NE includes an outside sensor, mean water sensor and a user s interface; it controls the heat/cold generators, the general temperature and the central pump. 9 NOE: 77

79 EVO-SA Control Unit his electric unit for regulation, which is an EXPANABLE multizone system, is used to control heating Functioning with 24 V AC transformer (not included). (with analogue servomotor 0-10V) +ventilation+air renewal+integration EVO xxyy-a xx: number of mixing valves - up to 8 each zone is provided with a temperature control and a humidity control - up to 32 Basic Config. EVO-SA Code $ 2, component name code description control q.ty price total EVO-M System Central Unit Master-M1 +Kit Connectors Up to 2 mixing valves Up to 4 EVO-Z (max 8 temperature / humidity sensors) max 1 EVO-U ventilation - air renewal - integration) 1 $1, $1, IU User Interface ata display and control 1 $ $ A/H Room emperature/ Humidity Sensor Room temperature and humidity recording 1 $ $ E Outside Sensor Outside temperature recording 1 $ $ M Mean Water Sensor Mean temperature recording N. 1 for each mixing valve 1 $ $ SO Clock Board ime programming 1 $ $ N.B.: Considering RZ Price List 2010 RC1-CF = EVO-SA RC2-CF = EVO-SA EVOZ + 1 Sensor A/H + 1 Mean Water Sensor M 78

80 EVO-SA - Expansion Units List of components for the top expansion: EVO-SA component name code description control EVO-S EVO-S EVO-S System unit SLAVE-S2 +Kit Connectors System unit SLAVE-S3 +Kit Connectors System unit SLAVE-S4 +Kit Connectors Up to 2 mixing valves Up to 4 EVO-Z (max 8 temperature / humidity sensors) max 1 EVO-U ventilation - air renewal - integration) Up to 2 mixing valves Up to 4 EVO-Z (max 8 temperature / humidity sensors) max 1 EVO-U ventilation - air renewal - integration) Up to 2 mixing valves Up to 4 EVO-Z (max 8 temperature / humidity sensors) max 1 EVO-U ventilation - air renewal - integration) max q.ty EVO Regulation price total 1 $1, $1, $1, $1, $1, $1, EVO-Z Zone expansion unit +Kit Connectors Max 2 temperature / humidity sensors for each unit 16 $ $10, EVO-U AHU expansion unit +Kit Connectors Max 1 AHU functioning as al - integration for each unit 4 $ $2, IU User Interface ata display and control Max N.1 for each unit EVO-M1 or EVO-Sn. Max 3 units in all 2 $ $1, A/H Room sensor for temperature/humidity Room temperature and humidity recording. N. 1 for each zone 31 $ $12, M Mean Water Sensor C Channel emperature Sensor QA Air Quality Sensor Mean temperature recording N. 1 for mixing valve Channel temperature sensor for expansion unit EVO-Ux, which makes it possible to control the mean temperature of the air handling unit rate on the post-treatment coils. Channel sensor for the quality of the air with VOC sensor for expansion unit Wi-Ux. his makes it possible to control the quality of the air in rooms thanks to the renewal function of the air handling unit. 7 $ $ $ $ $1, $4, A/H sensor can be replaced with A sensor code for heating only. For very large buildings it can be necessary to install some units, repeating the signals from the central units EVO- M1 / EVO-S2 / EVO-S3 / EVO-S4. component name code description control q.ty price total 9 EVO-RM System unit SLAVE-RM1 +Kit Connectors Remote control card. It duplicates the activation and recording control of the data in EVO-M1 1 $1, $1, EVO-RS SLAVE-RS2 +Kit Connectors Remote control card EVO-RS2 It duplicates the controls EVO-S2 1 $1, $1, EVO-RS SLAVE-RS3 +Kit Connectors EVO-RS SLAVE-RS4 +Kit Connectors Remote control card EVO-RS3 It duplicates the controls EVO-S3 Remote control card EVO-RS4 It duplicates the controls EVO-S4 1 $1, $1, $1, $1,

81 E Code IU Code code price $ 2, BUS cable screened with two poles, max length 10 m. M Code EVO - Z 1_1 EVO - Z 1_2 Code Code M Code EVO - M1 Code RM1 (duplication/extension) Code SO Code A/H Code A/H A/H Code A/H A/H M Code IU Code BUS cable screened with two poles, max length 10 m. EVO - Z 2_1 EVO - Z 2_2 Code Code M Code EVO - S2 Code CBUS cable screened with three poles, max length1000 m. M Code M Code EVO-RS2 (duplication/extension) Code IU Code EVO - S3 Code A/H Code A/H A/H A/H BUS cable screened with two poles, max length 10 m. EVO - Z 3_1 EVO - Z 3_2 Code Code EVO-RS3 (duplication/extension) Code A/H Code A/H A/H A/H BUS cable screened with two poles, max length 10 m. M Code EVO - Z 4_1 EVO - Z 4_2 Code Code M Code EVO - S4 Code EVO-RS4 (duplication/extension) Code A/H Code A/H A/H A/H key to symbols: Zone output V R I 80

82 Graphic example to choose the configuration NOE: A/H sensor can be replaced with A sensor code for heating only. EVO Regulation EVO - Z 1_3 EVO - Z 1_4 EVO - U 1 Code Code Code V R I 1000 RK V A/H A/H A/H A/H Sensor QA Code Sensor C Code EVO - Z 2_3 EVO - Z 2_4 EVO - U 2 Code Code Code V R I 1000 RK V A/H A/H A/H A/H Sensor QA Code Sensor C Code EVO - Z 3_3 EVO - Z 3_4 EVO - U 3 Code Code Code V R I 1000 RK V A/H A/H A/H A/H Sensor QA Code Sensor C Code EVO - Z 4_3 EVO - Z 4_4 EVO - U 4 Code Code Code V R I RK V A/H A/H A/H A/H Sensor QA Code Sensor C Code

83 Wi-SA Controller stems with independent power production. Functioning with 24 V AC transformer (not included). Wi-SA controllers are able to manage very large systems, and they can be combined with different kinds of room sensors also within the same system, from traditional A/H sensors to wireless terminals. (with analogue servomotor 0-10V) +ventilation+air renewal+integration Wi xxyy-a xx: numbero of mixing valves - up to 8 yy: each zone is provided with a temperature control and a humidity control - up to 64 a. Basic configuration Wi-SA (without room sensor) NEW Code $ 2, component name code description control q.ty price total Wi-M System central unit Wi-M1 +Kit Connectors Up to 2 mixing valves Up to 8 Wi-Z (max 16 temperature / humidity sensors) max 2 Wi-U ventilation - air renewal - integration) 1 $1, $1, IU-Pro User Interface Pro (larger screen) ata display and control 1 $ $ E Outside Sensor Outside temperature recording 1 $ $ M Mean Water Sensor Mean temperature recording N. 1 for each mixing valve 1 $ $ emperature/humidity Sensors for Wi-SA component name code description control q.ty max price total A/H Room sensor for temperature/humidity Room temperature/humidity recording 64 $ Wi-BP BUS Bus room sensor for temperature/humidity Room temperature/humidity recording 64 $ Wi-B BUS Bus terminal with sensor A/H and key setting Room temperature/humidity recording and setting 64 $ Wi-W Wireless terminal with temperature/humidity sensor and key setting Room temperature/humidity recording and setting 64 $1, Wi-WP Wireless temperature/humidity sensor Room temperature/humidity recording 64 $ Wi-P HOME User interface touch panel System display and control in local modality only 1 Next production Wi-P PRO User interface touch panel System display and control in local modality and supervision through ethernet 1 Next production Wi-P BOX Embedded box touch panel It contains the touch panel for wall embedded installation 1 Next production A/H sensor can be replaced with A sensor code for heating only. 82

84 Wi-SA - Expansion Units List of components for the top expansion: Wi-SA component name code description control q.ty price total Wi-S Wi-S Wi-S System unit SLAVE-S2 +Kit Connectors System unit SLAVE-S3 +Kit Connectors System unit SLAVE-S4 +Kit Connectors Up to 2 mixing valves with Wi-Mix (second mixer) Up to 8 Wi-Z (max 16 temperature / humidity sensors) max 2 Wi-U ventilation - air renewal - integration) Up to 2 mixing valves with Wi-Mix (second mixer) Up to 8 Wi-Z (max 16 temperature / humidity sensors) max 2 Wi-U ventilation - air renewal - integration) Up to 2 mixing valves with Wi-Mix (second mixer) Up to 8 Wi-Z (max 16 temperature / humidity sensors) max 2 Wi-U ventilation - air renewal - integration) Wi Regulation Wi-SA controller can be provided with different room sensors, also within the same system. 1 $1, $1, $1, $1, $1, $1, Wi-MIX Additional unit to control mixing valves It controls the second mixer for each central unit: Wi-M1 / S2 / S3 / S4 4 $ $ Wi-Z Wi zone expansion unit +Kit Connectors Max 2 temperature / humidity sensors for each unit 32 $ $20, Wi-U AHU expansion unit +Kit Connectors Max 1 AHU functioning as dehumi- - integration for each unit 8 $ $5, IU-Pro User Interface Pro (larger screen) ata display and control Max N.1 for each unit Wi-M1 / S2 / S3 / S4 Max 3 units in all 2 $ $1, M Mean Water Sensor Mean temperature recording N. 1 for mixing valve 7 $ $ Wi-AP Access point Antenna communicate with wireless components 4 $ $3, Wi-RP Repeater Antenna repeater to communicate with wireless components 4 $ $3, C Channel emperature Sensor Channel temperature sensor for expansion unit Wi-Ux, which makes it possible to control the mean temperature of the air of the air handling unit by the modular control of the 4 $ $ QA Air Quality Sensor Channel sensor for the quality of the air with VOC sensor for expansion unit Wi-Ux. his makes it possible to control the quality of the air in rooms thanks to the renewal function of the air handling unit. 4 $1, $4,

85 M Code mix E Code IU-Pro 1 a Code Code price $ 2, E.g. configuration with A/H sensors Wi-Z 11 Code Wi-Z 12 Wi-Z 13 Wi-Z 14 Wi-Mix Code max bus distance 1.5 Km M Code mix Wi-M1 Code mix IU-Pro 2 a Code Wi-Mix Code A/H A/H Code Wi-Z 21 Code A/H A/H A/H A/H A/H A/H E.g. configuration with Bus erminals Wi-Z 22 Wi-Z 23 Wi-Z 24 RN RN max bus distance 1.5 Km Wi-S2 Code mix IU-Pro 3 a Code Wi-B Wi-B Code Wi-B Wi-B E.g. configuration with Wireless erminals Wi-B Wi-B Wi-B Wi-B M Code Wi-Z 31 Code Wi-Z 32 Wi-Z 33 Wi-Z 34 5 mix Wi-Mix Code max bus distance 1.5 Km Wi-S3 Code mix Wi-AP Code Wi-W Wi-W Code E.g. Mixed configuration Wi-W Wi-W Wi-W Wi-W Wi-W Wi-W M Code mix Wi-Mix Code Wi-Z 41 Code Wi-Z 42 Wi-Z 43 Wi-Z 44 Wi-S4 Code mix Wi-AP Code Wi-W Wi-W Code Wi-W Wi-W Wi-B Wi-B Wi-B Wi-B key to simbols: Zone output V R I 84

86 Graphic example to choose Wi-SA configuration Wi Regulation max bus distance: 1 Km Wi-U 11 Wi-Z Z1 15 Wi-Z Z16 Wi-Z Z17 Wi-Z Z18 Code Wi-U 12 V R I RK V R I RK 0-10V 0-10V A/H A/H A/H A/H A/H A/H A/H A/H Sensor QA Code Sensor QA Sensor C Code Sensor C max bus distance: 1 Km W W Wi-Z 25 Wi-Z 26 Wi-Z 27 Wi-Z 28 Wi-U 21 Code V R I RK Wi-U 22 V R I RK 0-10V 0-10V Wi-B Wi-B Wi-B Wi-B Wi-B Wi-B Wi-B Wi-B Sensor QA Code Sensor QA Sensor C Sensor C Code max bus distance: 1 Km Wi-Z 35 Wi-Z 36 Wi-Z 37 Wi-Z 38 Wi-U 31 Code V R I RK Wi-U 32 V R I RK 0-10V 0-10V Wi-W Wi-W Wi-W Wi-W Wi-W Wi-W Wi-W Wi-W Wi-RP Code Sensor QA Code Sensor C Code Sensor QA Sensor C max bus distance: 1 Km Wi-U 41 Wi-Z Z4 45 Wi-Z Z46 Wi-Z 47 Wi-Z 48 Code Wi-U U4 42 V R I V R I RK RK 0-10V 0-10V A/H A/H A/H A/H NOE: ALL COMBINAIONS ARE VALI Wi-W Wi-B Wi-W A/H Sensor QA Code Sensor C Code Sensor QA Sensor C 85

87 .NE Controller EVO-MASER.NE / Wi-MASER.NE (for centralized system) his climatic regulation is used to control radiant heating and cooling systems with CENRALIZE POWER PROUCION. Functioning with AC 24 V transformer (not included). Centralized regulation can be carried out through EVO-MASER.NE controller or Wi-MASER.NE controller. Master.NE controller includes: It controls: MASER.NE control units can be connected with 64 peripheral devices (to control the system), through BUS RS485 connection; MASER.NE control units give the following information: he picture below shows how EVO-SA / Wi-SA controllers change into EVO.NE / Wi.NE controllers. + RS485 EVO-SA - SO EVO.NE - E Wi-SA - + E RS485 Wi.NE 86

88 .NE Controller EVO-MASER.NE configuration Code NE Regulation $ 2, component name code description control q.ty price total MASER Control Unit with Centralized hermal Production + Kit Connectors It controls max. 64 System Central Units connected with each other in 1 Outside Sensor 1 General Mean Water Sensor 1 Mixing valve (general pre-mixing) 1 Chiller contact 1 Boiler contact 1 General pump contact 1 SEASON contact 1 $1, $1, IU User Interface ata display and control 1 $ $ E Outside Sensor Outside temperature recording 1 $ $ M Mean Water Sensor Mean temperature recording 1 $ $ SO Clock Board ime programming 1 $ $ RS Serial Board RS485 ata reception and transmission through BUS cable 1 $ $ NOE: BUS cable used to connect EVO-MASER.NE control unit to the peripheral devices is 1000 m long. Wi-MASER.NE configuration Code $ 2, component name code description control q.ty price total It controls max. 64 System Central Units connected with each other in MASER Wi IU-PRO Control Unit with Centralized hermal Production + Kit Connectors User Interface Pro (larger screen) 1 Outside Sensor 1 General Mean Water Sensor 1 Mixing valve (general pre-mixing) 1 Chiller contact 1 Boiler contact 1 General pump contact 1 SEASON contact 1 RS485 board 1 $1, $1, ata display and control 1 $ $ E Outside Sensor Outside temperature recording 1 $ $ M Mean Water Sensor Mean temperature recording 1 $ $ NOE: BUS cable used to connect Wi-MASER.NE control unit to the peripheral devices is 1000 m long. 87

89 .NE Peripheral evices Bacic configuration EVO.NE Code $ 3, component name code description control q.ty price total EVO- M System central unit Master-M1 +Kit Connectors Up to 2 mixing valves Up to 4 EVO-Z (max 8 temperature / humidity sensors) max 1 EVO-U ventilation - air renewal - integration) 1 $1, $1, IU User Interface ata display and control 1 $ $ A/H Room sensor for temperature/humidity Room temperature/humidity recording N. 1 for each zone 1 $ $ M Mean Water Sensor Mean temperature recording N. 1 for each mixing valve 1 $ $ RS Serial Board RS485 ata reception and transmission through BUS cable 1 $ $ NOE: BUS cable used to connect MASER.NE control unit to the peripheral devices is 1000 m long (page 79). Basic configuration Wi.NE (without room sensors) Code $ 2, component name code description control q.ty price total Wi-M System central unit Wi-M1 +Kit Connectors Up to 2 mixing valves Up to 8 Wi-Z (max 16 temperature / humidity sensors) max 2 Wi-U ventilation - air renewal - integration) 1 $1, $1, IU-Pro User Interface ata display and control 1 $ $ M Mean Water Sensor Mean temperature recording N. 1 for each mixing valve 1 $ $ RS Serial Board RS485 ata reception and transmission through BUS cable 1 $ $ NOA: For Wi. NE expansion units you can use the same Wi-SA expansion units (pages 82 and 83). 88

90 Connectivity EVO / Wi Regulation Optional components for the connectivity with EVO-SA and Wi-SA systems components name code description control q.ty price total KI EVO-MB Wi-MB Serial Board RS485 - ata Format ModBus his kit makes it possible to connect the system to a MASER control unit through the communication protocol ModBus slave with RU modality and communication standard RS $ $ KI EVO-Knx Wi-Knx Serial Board EIB-Konnex - C) Software to interface EIB-Konnex system his kit makes it possible to connect the system to a MASER control unit through the communication protocol EIB-Konnex. 1 $ $ KI EVO-PC Wi-PC (C) Software EVO-Lution - USB-485 Converter - Serial Board RS485 his kit makes it possible to connect the system to a computer. hanks to Evo-Lution software 3 kinds of connections are available: 1) Local Connection 2) LAN Remote Connection 3) WEB Remote Connection 1 $2, $2, LOCAL CONNECION KI EVO-PC LAN Remote CONNECION EVO-Lution EVO-Lution WEB Remote CONNECION EVO-Lution 9 EVO-Lution World Wide Web EVO-Lution 89

91 UAC - Room Humidistat with Remote Sensor Moisture metering unit with a microprocessor for the hygrometric control of a room sensor. Set, differential, and relative humidity can be displayed at the same time on the liquid crystal screen. Main functions: minimum and maximum limit in - Analogue Room Humidistat code IN bar module price $ /pc humidity, and measuring unit made of synthetic material. code frame module price $ /pc Embedded Electronic Humidistat UA-I NEW Next production Embedded electronic humidistat for humidity control in a room by activating range: 30 90% RH. Functioning differential ± 2,5 % RH. Embedded installation in 3-module box. code frame module price $ /pc his thermohumidistat is used in small radiant systems. It controls temperature and humidity in manual or automatic mode with time bands in small radiant circulation pump or the zone valve of the system depending on the temperature or the humidity detected in the room. ension 24 Vac/dc, %, 50/60 Hz, 1 multifunction digital input, n. 2 digital outputs 2 x relays 5 A, 230 V to control temperature / humidity, embedded installation in a 3-module box.. NEW Next production code frame modules price $ /pc NEW Next production Embedded electronic thermostat with selector SUMMER-WINER-NIGH, white or dark grey cover. ension: 1 battery 1,5V (AAA). Summer/winter functioning. code version frame module price ial 3 $ /pc LC 3 $ /pc 90

92 hermoregulation Embedded igital Chronothermostat NEW Next production Embedded digital chrono-thermostat for weekly programming and 3 temperature levels which can be set during the day. White or dark grey cover. ension with 1 battery of 1,5V (AAA). Summer/winter functioning. LC backlit display. Embedded installation in 3-module box. code frame modules price $ /pc Chronothermostat - ime setting thermostat controlling room temperature. It has some special functions, optimization of the time when the system is to be switched on, antiscuff device for the pump, and setting of the limits for highest and lowest temperature. code frame modules price $ /pc hermostatic Element hermostatic element, with progressive opening, length of the capillary tube of 2 element PF C $ /pc Valve Body - 3-way mixing valve activated by the thermostatic element. It is provided with 3 tail pieces. valve body code size KV price Ø ½ 2,8 $ /pc Ø ¾ 3,2 $ /pc Ø 1 5,0 $ /pc Servomotor of 230 and 0-10 his electric reversible motor can be manually activated, and it is provided with limit micro-switch. It can be installed on VM3 mixing valves Ø 1 to 1 ½. Stroke 6.5 mm. egree of protection IP 42. Force 300 N. Input 230 V and 24 V. 10 mod. code tension price V $ /pc V $ /pc 91

93 Valve Body - 1, 1¼ and 1½ Linear 3-way mixing valve, equi-percentage regulation, stroke 6.5 mm, PN 16. It can be combined with electric reversible motor N300 of 230 or valve body code valve N size outlet size KV price Ø 1 Ø 1½ 10 $ /pc Ø 1¼ Ø 2 16 $ /pc Ø 1½ Ø 2¼ 25 $ /pc ail Pieces for Valves 1, 1¼ and 1½ Brass tail pieces with washer for VM3 mixing valves 1, 1¼ and 1½. Package: 3 items. valve code valve N size outlet size price Ø 1 Ø 1½ - Ø 1 $ /pc Ø 1¼ Ø 2 - Ø 1¼ $ /pc Ø 1½ Ø 2¼ - Ø 1½ $ /pc Servomotor - of 230 V and 0-10 his electric synchronous reversible servomotor can be manually activated. Ideal solution to be combined with mixing valves, VM3 of ½ and ¾ and VJ (all versions). Input 230 V and 24 V. mod. code tension price V $ /pc V $ /pc Valve Body - of ½, ¾ and 1 Linear 3-way mixing valve, equi-percentage regulation, stroke 6.5 mm, PN 16. It can be combined with electric reversible motor VJ of 230 or valve body code valve IN size outlet size KV price ail Pieces for Valves ½, ¾ and Ø ½ Ø ½ 2.5 $ /pc Ø ¾ Ø ¾ 4.0 $ /pc Ø 1 Ø 1¼ 6.3 $ /pc Brass tail pieces with washer for VM3 mixing valves ½, ¾ and 1. Package: 3 items. valve body code valve N size outlet size price Ø ½ Ø ½ - Ø 3 / 8 $ /pc Ø ¾ Ø ¾ - Ø ½ $ /pc Ø 1 Ø 1¼ - Ø 1 $ /pc 92

94 hermoregulation Valve Body - Linear 3-way mixing valve, equi-percentage regulation, temperature control through integrated bypass. It is provided with tail pieces. It can be combined with electric reversible motor VJ of 230 or valve body code size KV price Ø ½ 2.5 $ /pc Ø ¾ 3.3 $ /pc Ø $ /pc Ø 1 ¼ 5.0 $ /pc Ø 1 ½ 11 $ /pc By-pass Lockshield Valve Lockshield valve for by-pass made of chrome brass with tail piece Ø ¾ $ /pc No-ice Control Unit Electronic unit to control radiant heating systems with no-ice function for ramps or inclined driveways and pedestrian precincts. RZ NO-ICE control unit activates the heating system, when there is moister on the surface exposed to bad weather control these conditions and to act in the right way, the control unit uses two sensors: one for humidity and one for temperature. code IN bar modules price $ 2, /pc Humidity Sensor with 5 Wires (yellow colour) Sensor to detect humidity on the surface, against ice and snow; the system should be placed outside, exposed to the weather. It is better to place the sensor far from m $ 1, /pc emperature Sensor with 4 Wires (blue colour) be placed inside, under the heated surface in order to control its temperature m $ 1, /pc 93

95 - Actuator for Zone Valves VZR bayonet valve, a PC resistor; power of the motor N, degree of protection IP54, tension of the power supply 230 V 50 Hz. It is provided with a limit microswitch with no tension: 3A 230V. - 2-way Zone Valve code tension price V $ /pc V $ /pc wo-way zone valve, Ø ¾ or 1, with a main press-forged body made of O 58 UNI It is provided with a shutter covered with nitrile rubber, a shaft made of stainless steel AISI 303, Niploy treated, and seals NBR 70 sh PFE, ASBERI his valve is provided with tail pieces. N code size KV price Ø ¾ 4 $ /pc Ø 1 6 $ /pc - 3-way Zone Valve hree-way zone valve, Ø ¾ or 1, with a main press-forged body made of O 58 UNI It is provided with a shutter covered with nitrile rubber, a shaft made of stainless steel AISI 303, Niploy treated, and seals NBR 70 sh PFE, ASBERI his valve is provided with tail pieces. N code size KV price Ø ¾ 4 $ /pc Ø 1 6 $ /pc valve easily with a balancing by-bass, which are both placed on the RZ Control and op Control manifolds Ø ¾ $ /pc Ø 1 $ /pc Balancing By-pass he balancing by-pass, Ø ¾ and Ø 1, has a main press-forged body made of O 58. It is provided with a shutter made of NBR 70, and seals made of NBR Bar. N Ø ¾ $ /pc Ø 1 $ /pc 94

96 System for ehumidification and Primary Air Control Stale air towards outside Air from outside Comfort Unit UC 410 HE: example of neutral air immission and splitting of air Stale air from inside Air outlet towards inside (clean) 11 95

97 Comfort Unit UC 410 HE NEW uctable unit for air renewal dential application introduced into the room. his unit makes it possible to use free additional sensible power in summer thanks to a heat discharge component using the expelled air, and it offers night free-cooling. SPECIFICAIONS Standard electric power Compressor electric 660 Watt 460 W power Fan electric power 60 W+60 W 3 /h lxhxd 1106x276x965 $ 8, /pc Standard head loss for hydr. circuit 4 kpa 3 Head with 200 m /h 37 Pa Output head with 250 m 3 /h 22 Pa (calculated on hemispheric isotropic distribution at 1.5 m) Weight 76 kg FUNCIONING MOES: regulator. switches. It is necessary to connect the unit with a summer/winter commutator. the Room emperature/humidity Sensor A/H, the User Interface IU, the Clock Board SO. component name code description control q.ty price IU User Interface ata display and control 1 $ /pc A/H Room sensor for temperature/humidity Room temperature/humidity recording 1 $ /pc E Outside Sensor Outside temperature recording 1 $ /pc SO Clock Board ime programming 1 $ /pc 96

98 Air Intake Plenum he air intake plenum is made of a zinc-plated sheet metal, and it is used to connect the air intake ducts with Comfort Unit. It includes a separator to part the air passing through the heat recovery unit from the room recirculation air. Furthermore, it is collars to connect round ducts with diameter of 150 mm. ypical application: the plenum makes it possible to convey the air taken from the rooms (bathrooms, kitchens) towards the expulsion outlet and to convey the intake air from the other rooms separately $ /pc Air Supply Plenum he air supply plenum is made of a zinc-plated sheet metal, and it is insulated inside. It is used to connect Comfort Unit with air supply round ducts. It can be connected with 5 supply round ducts at most: 2 side ducts with diameter of 150 mm and 3 central ducts with diameter of 100 mm. 2 collars of 100 mm and 1 collar of 150 mm are supplied as standard $ /pc Outside Air Connector he outside air connector is made of a zinc-plated sheet metal, and it is insulated inside. It is used to connect the outside air intake duct with Comfort Unit or to connect Comfort Unit with the air expulsion outlet. It can be connected with max. 2 round ducts with diameter of 150 mm, and makes it possible to level the outside air intake ducts and the air expulsion outlets in the same direction. 1 collar with diameter of 150 mm is supplied as standard $ /pc 11 97

99 they are provided with coils for pretreatment and posttreatment, which are fed by the cool water of the radiant panels. heir body is made of zinc-plated sheet metal, and they shall be embedded into walls thanks to a proper frame, provided with holes for wire and pipe connections. Absorbed power: 340 W; power supply: Frame and refrigerating unit are individually packed lxhxd 760x619x207 $ 3, /pc 204 refrigerating units. Weight: 11 kg lxhxd 760x619x207 $ /pc UFI 204 built-in refrigerating units for walls by RZ are suited for CI 204 frames (previously installed) and they are provided with coils for pretreatment and posttreatment, which are fed by the water of the radiant panels. Absorbed power: Weight: 34 kg lxhxd 722x573x202 $ 2, /pc white frenchpolished. he air goes through a grille, made of anodized aluminium. Weight: 6 kg lxhxd 790x630x18 $ /pc 98

100 provided with coils for pretreatment and posttreatment, which are fed by the water of the radiant panels. heir body is made of MF wood, white french-polished, and they shall be Weight: 49.6 kg lxhxd 800x650x230 $ 3, /pc are provided with coils for pretreatment and posttreatment, which are fed by the water of the radiant panels. heir body is made of zinc-plated sheet metal, and they shall be horizontally embedded into false ceilings. his is a new advanced version. Absorbed Weight: 36 kg lxhxd 711x242x546 $ 2, /pc with a water trap made of stainless steel. hey include: an alternative compressor with R134A refrigerant placed on proper vibration damping supports of rubber, a soundproof compartment, coils for pre-treatment and post-treatment, which are individually fed by speed direct drive; an electrical board for power supply, provided with a control card. ³/h. Necessary pressure (medium speed): 52 Pa. Absorbed power: 500 W. Size: 840x290x600 mm. Weight: 47 Kg lxhxd 840x290x600 $ 4, /pc provided with a water trap made of stainless steel. hey include: a hermetic rotary vane compressor with R407C refrigerant placed on proper vibration-damping supports of rubber, a soundproof compartment, coils for pretreatment and posttreatment, which are a three-speed direct drive; an electrical board for power supply, provided with a control card. Nominal Air Flow: 600 m³/h. Necessary Pressure for Nominal Flow (medium speed): 170 Pa. Absorbed Power: 900 W. Size: 690x349x718 mm. Weight: 53 kg lxhxd 690x349x718 $ 5, /pc 11 99

101 RK 1000 Heat Recovery Unit heir frame is made of zinc-plated sheet metal, and it is provided with a water trap made of stainless steel. hey include: a hermetic rotary vane compressor with R407C refrigerant placed on proper vibration-damping supports of rubber, a soundproof compartment, coils for pretreatment and posttreatment, which are individually fed by water and can supply board for power supply, provided with a control card. Nominal Air Flow: 1000 m³/h. Necessary Pressure for Nominal Flow (medium speed): 100 Pa. 50,2 l/24 h Max. Absorbed Power: 950 W. Weight: 73 kg lxhxd 875x398x761 $ 7, /pc Heat recovery units by RZ are suited for partial or total renewal of the air in a room and for regeneration of the expelled energy. hey should be combined with 1000 into channels with various positions, and it is provided wih a double water trap made of stainless steel. electrical board for power supply, provided with a control card. Nominal Air Flow: 1000 m³/h. Necessary Pressure for Nominal Flow (medium speed): 100 Pa. Max. Absorbed Power: 150 W. Weight: 47 Kg. Single amper for RK 1000 Heat Recovery Unit lxhxd 875x398x980 $ 5, /pc Single damper made of aluminium. It has wing contour, and it is provided with on/off motor with positive limit stop. t should be combined with RK 1000 heat recovery unit, it should be placed into the channel for outside air intake, and it is electrically connected with the double dampers. Rated ension: AC240 V 50/60 Hz Absorbed Power: 1.5 W Connection: cable 3x0.75 mm² orque: 5 Nm (rated tension) ime of Rotation: 150 s Indication of Position: mechanical lxhxd 365x368x120 $ /pc ouble dampers for RK 1000 Heat Recovery Unit ouble damper made of aluminium. It has wing contour, and it is provided with on/off motor with positive limit stop. It should be combined with RK 1000 heat regenerator, it should be placed into the channel for air intake from a room, and it is electrically connected with the single air lock. he air in the intake channel is deviated to the regenerator and then expelled outside, in renewal conditions; otherwise, if the air is recirculating, it is conveyed Rated ension: AC240 V 50/60Hz Absorbed Power: 1.5 W Connection: cable 3x0.75 mm 2 orque: 5 Nm (rated tension) ime of Rotation: 150 s Indication of Position: mechanical lxhxd 700x368x120 $ /pc 100