DOMESTIC LPG REGULATORS & ACCESSORIES MOVABLE TANKS TANK INSTALLATION CONNECTED WITH MANIFOLDS

Transcription

1

2 MOVABLE TANKS Room volume < 10 m 3 Forbidden Room volume from 10 up to 20 m 3 Max 1 tank up to 15 Kg Room volume from 20 up to m 3 Max 2 tanks up to 20 Kg total Room volume from > 50 m 3 Max 2 tanks up to 30 Kg total According to the limits of tank caacities reported above. If all the gas appliances in the house exceed the tank capacities,all the tanks connected together, they must be installed and placed outside the house. TANK INSTALLATION CONNECTED WITH MANIFOLDS CONNECTED TANK INSTALLATION LPG tank 2 Flexible hose 3 Manifold with intercepting and non-return devices 4 Intercepting device 5 Changeover switch valve 6 Final pressure regulator 7 End user gas appliances G2 / 2

3 LPG single stage mini kit LPG double stage mini kit Industrial use EN Non-return taps 1/8 F gauge connection Inlet pressure : 0,5 16 bar Settable outlet press.: mbar Inlet : W20 x 1/14 left Outlet : 3/8 F Working temp. : -20 C + 50 C Capacity: 3 kg/h Domestic use For outdoor installation. EN Installation according to UNI 7131 Non-return taps With safety relief valve 1/8 F gauge connection Inlet pressure : 0,5 16 bar Outlet press.: 29 mbar Inlet pressure: W20 x 1/14 left Outlet : 3/8 F Working temp. : -20 C + 50 C Capacity: 5 kg/h / S 1/9 LPG single stage mini kit LPG double stage mini kit with automatic changeover switch valve Domestic use. For outdoor installation. EN Installation following UNI 7131 Non-return taps With safety relief valve 1/8 F gauge connection Domestic use. For outdoor installation. According to EN Installation according to UNI 7131 Non return connections With safety relief valve 1/8 F gauge connection Inlet pressure : 0,5 16 bar Outlet press.: 29 mbar Inlet pressure: W20 x 1/14 left Outlet pressure: 3/8 F Working temp. : -20 C + 50 C Capacity: 3 kg/h Inlet pressure : 0,5 16 bar Outlet press.: 29 mbar Inlet pressure: W20 x 1/14 left Outlet pressure: 3/8 F Working temp. : -20 C + 50 C Capacity: 6kg/h C1 1/ S 1 LPG single stage mini kit Gas cylinder coupling manifold kit A Composition: A - High pressure reducer: Max inlet pressure : 16 bar Outlet pressure : 1,5 bar B - Low pressure regulator: Max inlet pressure : 1,5 bar Outlet pressure : 30 mbar Capacity: 6 kg/h B Inlet : W20x1 1/4" sx Composed by: Outlet : 3/8" F 1 Pcs cod coupling manifold 2 Pcs cod LPG flexible hoses - L 50 cm 1 Pcs cod LPG single stage regulator low pressure capacity 3 kg/h /6 1 Exhaustion KIT IS 1 G2 / 3

4 Manifold for coupling cylinders Manifold for coupling cylinders Built in stainless steel pipe without any welded parts according to UNI EN DN 25 PN 40 complete of non- return tap according to UNI Inlets : W 20 x 1/14 left M 1 Outlet : W 20 x 1/14 left M (central) Built in stainless steel pipe without any welded parts according touni EN DN 25 PN 40 complete of non- return tap according to UNI safety relief valve - manometer 2 Inlets : W 20 x 1/14 left M 1 Outlet : W 20 x 1/14 left M (central) inlets without flexible hoses inlets without flexible hoses 1 Manifold for coupling cylinders Manifold for coupling cylinders Built in stainless steel pipe without any welded parts according touni EN DN 25 PN 40 complete of non- return tap according to UNI Inlets : W 20 x 1/14 left M Outlet: left - central - right Built in stainless steel pipe without any welded parts according touni EN DN 25 PN 40 complete of non- return tap according to UNI safety relief valve - manometer 2 Inlets : W 20 x 1/14 lhs M Outlet: left - central - right inlets without flexible hoses inlets without flexible hoses 1 Manifold for coupling cylinders Manifold for coupling cylinders Built in stainless steel pipe without any welded parts according touni EN DN 25 PN 40 complete of non- return tap according to UNI Inlets : W 20 x 1/14 left M Outlet: left - central - right inlets without flexible hoses 1 3 Inlets : W 20 x 1/14 left M 3 Outlet : W 20 x 1/14 leftm (central) Outlet: left - central - right Built in stainless steel pipe without any welded parts according touni EN DN 25 PN 40 complete of non- return tap according to UNI safety relief valve - manometer inlets without flexible hoses 1 G2 / 4

5 LPG flexible hose - FF inlets in brass Manifold spare parts With anti-torsion handle. Made in rubber hose according to UNI norms with stainless steel sheath Max inlet pressure : 10 bar Explosion pressure: 30 bar Connections : W20 x 1/ 14" left F L 50 cm 1/ L 70 cm 1/ L 100 cm 1/ L 150 cm 1/ L 200 cm 1/ Tap W20 x 1 1/14" sx - 1/2" M Safetyrelief valve - 16 bar 1/4" M Manometer - bottom connection 1/4" M - 25 bar Manometer - bottom connection 1/8" M - 25 bar 1 Coupling joint for manifold LPG flexible hose - MF inlets in brass PN 40 Inlet : Outlet : W 20 x 1/14" lhs F (nuts) W 20 x 1/14" lhs M With anti-torsion handle. Made in rubber hose UNI with stainless steel sheath Max inlet pressure : 10 bar Explosion pressure: 30 bar Connections : see version W 20 x 1/14 F left x 1/4 M L 55 cm 1/ W 20 x 1/14 F left x 3/8 M L 55 cm 1/ A 2 C 1 Two way outlet joint 1 2 LPG stainless steel flexible hose- FF inlets 100% SS PN 40 Inlet : Outlet : W 20 x 1/14" lhs F (nuts) W 20 x 1/14" lhs M Vertical Horizontal 5 100% stainless steel Max inlet pressure : 20 bar Explosion pressure: 50 bar Connections : W20 x 1/ 14" left F T-connector three way brass joint Fax 1-50 cm 1/ Fax cm 1/10 PN 40 Connections : W 20 x 1 /14 left M LPG high pressure flexible hose-ff inlets 100% SS R 3 V 1 Vertical venting safety relief valve Free vent, it exhausts over pressure flows According to : DVGW Temperature : - 30 C + 60 C Connections : W20 x 1/14 left F L 50 cm 1 Connection: 3/8" M Standard setting 3 bar Standard setting 18 bar 1 G2 / 5

6 LPG right-left brass reduction Methane three way brass rubber holder ø W 20 x 1/14" left- 1/4" MM W 20 x 1/14" left - 3/8" MM W 20 x 1/14" left - 1/2" MM W 20 x 1/14" left- W 20 x 14 left MM way Y shaped 10 Left nut LPG three way brass rubber holder ø Left nut - CH way Y shaped 10 Nut and rubber holder LPG three way brass rubber holder ø Left nut - CH 25 rubber holderr Ø 9 mm way T shaped 10 Nut and brass fittings LPG four way brass rubber holder ø Left nut - Ch 25 and fitting 1/4 M ways 10 Gaskets -LPG Double rubber holder - LPG Made in millboard Made in rubber Made in aluminium 100 Usable also with pipes for oxygen, acetylene, compressed air, etc GTG DN 9 10 G2 / 6

7 LPG rubber holder Methane rubber holder LPG 3/8" F - Ø LPG 1/2" F - Ø Methane 3/8" F - Ø Methane 1/2" F - Ø LPG rubber holder Methane rubber holder LPG 1/8" M - Ø LPG 1/4" M - Ø LPG 3/8" M - Ø LPG 1/2" M - Ø Methane 3/8" M - Ø Methane 1/2" M - Ø Methane 3/4" M - Ø Methane 1" M - Ø LPG rubber holder Methane rubber holder According to UNI LPG 3/8" F - Ø LPG 1/2" F - Ø According to UNI Methane 1/2" F - Ø15 10 LPG rubber holder Methane rubber holder According to UNI LPG 3/8" M - Ø LPG 1/2" M - Ø According to UNI Methane 1/2" M - Ø15 10 Male methane / LPG 90 rubber holder Female methane / LPG 90 rubber holder With LPG Ø 9 extension /8" F - Ø /2" F - Ø With LPG Ø 9 extension /2" M - Ø G2 / 7

8 M/F reduction Italian - German joint Italian : W20 x 1/14 left German : W21,8 x 1/14 left /8" F x 1/4" M /4" F x 3/8" M /4" F x 1/2" M /8" F x 1/2" M /4" F x 3/4" M /8" F x 3/4" M /2" F x 3/4" M 10 M/M reduction M Italian joint - F German joint F Italian joint - M German joint 10 Gas safety cock with wall support According to NF XP E standard It incorporates an automatic shut-off device which intervenes in case the connected flexible hose breaks or gets disconnected. Suitable for connections with inox steel flexible hoses /8" M x 1/4" M /4" M x 3/8" M /4" M x 1/2" M /8" M x 1/2" M /2" M x 3/4" M 10 Working pressure: 8 37 mbar Working temperature: - 15 C + 60 C Shut-off activates at : 200 mbar PN /2" MM 10 Exhaustion Horizontal gas tap M/F reduction PN 10 Proportional opening /8" M x 1/4" F /4" M x 3/8" F /8" M x 1/2" F /2" M x 3/4" F /4" MF 10 Exhaustion /4" FF 10 Exhaustion /8" FF 10 Exhaustion Sleeve LPG regulator wrench /8" /4" /8" /2" /4" CH G2 / 8

9 Kit for underground tank - vertical axis - GS 41 type 701 VS For 1st and 2nd stage plants Maximum guaranteed LPG flow 10 kg/h Working temperature: -20 C +50 C Outlet pressure: 29 mbar Composition : N 01 1st stage high pressure reducer 40 kg/h with manometer N 01 2nd stage low pressure reducer 10 kg/h N 01 copper pipe N 01 dielectric joint N 01 ball valve 1/2" FF Vertical axis 1 Kit for underground tank - horizontal axis lt lt lt lt tank capacity type 701 H For 1st and 2nd stage plants Maximum guaranteed LPG flow 10 kg/h Working temperature: -20 C +50 C Outlet pressure: 29 mbar Composed of: N 01 1st stage high pressure reducer 40 kg/h with manometer N 01 2nd stage low pressure reducer 10 kg/h N 01 copper pipe N 01 dielectric joint N 01 ball valve 1/2" FF Horizontal axis 1 Kit for underground tank - vertical axis lt lt tank capacity type 701 V For 1st and 2nd stage plants Maximum guaranteed LPG flow 10 kg/h Working temperature: -20 C +50 C Outlet pressure: 29 mbar Composed of: N 01 1st stage high pressure reducer 40 kg/h with manometer N 01 2nd stage low pressure reducer 10 kg/h N 01 copper pipe N 01 dielectric joint N 01 ball valve 1/2" FF Vertical axis 1 Kit for outdoor LPG tank For 1st and 2nd stage plants Maximum guaranteed LPG flow 10 kg/h Working temperature: -20 C +50 C Outlet pressure: 29 mbar Composed of: N 01 1st stage high pressure reducer 40 kg/hwith manometer N 01 2nd stage low pressure reducer 10 kg/h N 01 copper braid section 35 mm - L. 1,5 N 01 clamp N 01 copper plated steel rod prevents stray current - copper thickness 100 micron L. 1,5 mt N 01 copper pipe with yellow sheath N 01 ball valve Kit G2 / 9

10 Level indicator dial Valve gaskets and covers C A D NPT gasket 3/4" NPT gasket 1" NPT gasket 1 1/4" EU cover EU cover EU cover 1 B E Lower check valves Glycerin filled indicator A - For all kinds of horizontal tanks B - Only for vertical tanks Lt.1000/ C - For horizontal tanks with double scanning D - Spare plastic cap with screw housing E - O ring 10 With non-return valve It allows to replace the valve without having to empty the tank Connections : see version LPG tank level indicator ST /4" conical - 3/4" cylindrical ST /4" conical - 1" cylindrical ST " conical - 1 1/4" cylindrical ST /4" conical - 3/4" cylindrical ST /4" conical - 1" conical ST " conical - 1 1/4" conical 1 lntake valve for LPG tank Linear magnetic drive with bakelite floater Complete with stainless steel screws and glycerin bath dial For horizontal tank ø 800 Lt. 990/ For horizontal tank ø 1000 Lt. 1750/ For vertical tank ø 800 Lt For vertical tank ø 1000 Lt For vertical tank ø 1200 Lt. 1550/ For spherical tank Lt It allows connections between the tank and the valve which draws LPG tank VL 13 - DN 3/4" NPT x 3/4" NPT for RL 15 1 On request VL 25 - DN 1 1/4" NPT x M 25 x 1,5 for RL 25 1 On request G2 / 10

11 LPG tank multiservice gas valve with manometer positioned for above reading Service valve gas phase with pressure gauge positioned on the TCF - LPG tanks Multiservice gas valve glycerin filled manometer scale 0-25 bar complete with overflow pipe (specify tank capacity) that allows 80% of tank filling complete of flange for testing manometer. Standard over pressure valve 50 Kg/h Optional over pressure shut-off valve 95 Kg/h (to be ordered code ) GSE 35 - DN 3/4" NPT x V Pool left 1 On request Over pressure shut off valve 95 Kg/h 1 On request Multiservice gas valve with glycerin filled manometer scale 0-25 bar complete with overflow pipe (specify tank capacity) that allows 80% of tank filling complete of flange for testing manometer; over pressure shut-off valve included GSE 50 - DN 3/4" NPT x W 20 x 1 1/4" left 1 On request LPG tank multiservice gas valve Filling valve - LPG tanks Multiservice gas valve complete with overflow pipe that allows 80% of tank filling Supplied without manometer GS 41 1 Exhaustion DN 1 1/4 NPT for 1 3/4 ACME. It allows to fill the LPG tanks VRN 20 1 On request VRN 20 L with extension 1 On request Liquid transfer valve for LPG tank Spare manometers A B With built-in excess flow limiter 40 kg/h RL 25 - DN M 30 x 1,5 - M 25 x 1,5 for VL 25 1 On request RL 15 - DN M 30 x 1,5 - M 3/4" for VL 13 1 On request Welding joint for RL 15/20 valves 1 On request A - Side connection manometer 25 bar B - Back connection manometer 25 bar 1 G2 / 11

12 Clamp for copper plated steel rod Copper braid A B Diameters : see version For ground sink connection A - Clamp Ø B - Wire terminal 50 mm mm mm mm 2 with sheath 1 Copper plated steel rod LPG tank protective cover It prevents stray corrents Diameter : Length : Copper thickness : 18 mm 150 cm 100 micron Made in fire self-extinguishing plastic material UL 94 - class V Rectangular for horizontal tanks 55 x 28 H 23, Round for vertical tanks Ø 38 - H Without frame for spherical tanks Ø 36 - H Key lock Fixing pin P.T.R. 1 LPG Plant signal (signal board in Italian language) LPG cylinder cover cap Complete with gasket Blue Red Picket H Picket H Complete kit with pole, signal board and clip set /P Pole H 1000 Ø Signal board H 330 x L Clips set (bolts and nuts) 2 G2 / 12