Valves, Hydrants & Fittings. Water Valves Gate Valves / Fire Hydrants / Check Valves / Air Valves / Accessories

Transcription

1 Valves, Hydrants & Fittings AVK Water Valves Gate Valves / Fire Hydrants / Check Valves / Air Valves / Accessories Gas Valves Gate Valves / Drilling Valves / Ball Valves / Accessories Water Fittings Couplings / Adaptors / Repair Clamps / Under Pressure Tees Gas Fittings Repair Clamps / Tees / End Caps Talis Service Fittings 154 Ferrule Straps, Stopcocks and Chambers Viking Johnson Couplings & Adaptors QuickFit Couplings / Flange Adaptors FlexLock Couplings / Flange Adaptors AquaFast Couplings / Flange Adaptors AquaGrip Couplings / Flange Adaptors UltraGrip Couplings / Flange Adaptors MaxiFit Couplings - Standard Sleeve & Long Sleeve / Couplings - Large Diameter MaxiDaptor Large Diameter Flange Adaptors 16 UTILITIES 125

2 AVK Water Valves Gate Valves Series 21/35 CTC Series 21/35 CTO Resilient Seat Gate Valve BS EN &2 / BS &2 Ductile iron body EPDM rubber wedge WRAS approved Standard flange drilling to BS EN 1092 (ISO ) Epoxy coated according to WIS class B Closing direction: CTC Resilient Seat Gate Valve BS EN &2 / BS &2 Ductile iron body EPDM rubber wedge WRAS approved Standard flange drilling to BS EN 1092 (ISO ) Epoxy coated according to WIS class B Closing direction: CTO K K K K K K K K Series 21/50 CTC Series 21/50 CTO Resilient Seat Gate Valve BS EN &2 / BS &2 Ductile iron body EPDM rubber wedge WRAS approved Standard flange drilling to BS EN 1092 (ISO ) Epoxy coated according to WIS class B Closing direction: CTC 50, Resilient Seat Gate Valve BS EN &2 / BS &2 Ductile iron body EPDM rubber wedge WRAS approved Standard flange drilling to BS EN 1092 (ISO ) Epoxy coated according to WIS class B Closing direction: CTO 50, K K K K K K K K K

3 Drilling Gate Valves Equipment Continued / Bagging-Off Equipment Series 05/E Series 21/78 CTC Pipe Support Bush PE80/100 Pressure Class SDR17.6 Stainless Steel available Required to support the Pt pipe when fitted with couplings and valves. Correct SDR needed. J J J J J J J J J J BE BE BE BE BE Resilient Seat Gate Valve with ISO Flange BS EN &2 / BS Ductile iron body EPDM rubber wedge WRAS approved Standard flange drilling to BS EN 1092 (ISO ) Epoxy coated according to WIS class B Closing direction: CTC F10 ISO flange F14 ISO flange 400 CTO option available K K K K K K Series 37/50 CTC Series 21/60 CTC Resilient Seat Gate Valve BS EN &2 / BS &2 Ductile iron body EPDM rubber wedge WRAS approved Standard flange drilling to BS EN 1092 (ISO ) Epoxy coated to WIS class B Closing direction: CTC CTO option available K K K K K K Metal Seat Gate Valve BS EN &2 / BS &2 Ductile iron body Stem: stainless steel - BS S37 (standard) Standard flange drilling to BS EN 1092 (ISO ) Epoxy coated according to DIN & GSK approved Closing direction: CTC CTO option available K K K K K K K

4 AVK Water Valves Gate Valves Continued Series 54/31 CTC Series 54/33 CTC Metal Seat Gate Valve with F14 ISO Flange BS EN &2 / BS &2 Ductile iron body Epoxy coated according to DIN WRAS approved Closing direction: CTC CTO option available Metal Seat Gate Valve with F14 ISO Flange and Bypass BS EN &2 / BS &2 Ductile iron body Epoxy coated according to DIN WRAS approved Closing direction: CTC CTO option available K K K K K P Looking for ductile iron pipes? We have plenty to fit your requirements Utilities pages

5 Drilling Fire Hydrants Equipment / Bagging-Off Equipment Series 29/91 Series 29/93 Clearway Through Bore Fire Hydrant BS750 Type 2 Fixed Stopper Kitemarked, WRAS Approved Epoxy coated according to WIS class B Universally drilled flange to BS EN 1092:1997 Closing direction: CTC (CTO option is available) Auto Frost valve as standard Outlet options: Gunmetal, Belfast, Instantaneous, London V Thread, Bayonet, Stainless steel Data logger connection point option 73 inlet option 80 Clearway Through Bore Fire hydrant BS760 EPDM Rubber, WRAS Approved Ductile iron construction. 16 Through bore. Bore Dimension min. 80 Epoxy coated according to WIS class B Closing Direction CTC (CTO option available) Auto Frost Valve as standard Options on outlets: Gunmetal, Belfast, London 'V' Thread, Bayonet (Dublin), Stainless Steel 80 BD BD K BD Series 29/388 Fire Hydrant BS 750:2012 Type 2 Fixed / Loose Stopper Kitemarked Ductile iron body Stainless steel London 2½ round thread outlet Epoxy coated according to WIS class B WRAS approved Universally drilled flange to BS EN Auto frost valve 80 K83136 (F) (F) K83161 (L) (L) (F) = Fixed (L) = Loose Description K Auto frost valve K dust cap assembly K Stainless steel outlet kit Series 29/61 Fire Hydrant BS 750:2012 Type 1 Hydrant Kitemarked Stainless Steel London 2½ round thread outlet Ductile iron body EPDM rubber Epoxy coated according to WIS class B WRAS approved Standard flange drilling to BS EN Closing direction: CTC 80 K

6 AVK Water Valves Check Valves Series 41/20 Series 641/21 Free Shaft End Check Valve to BS EN / EN series 48 Ductile iron body Epoxy coated according to WIS class B Resilient seated disc: EPDM rubber with a steel insert Flange drilling 16 BS EN (ISO ) Multi Door Recoil Non Slam Metal Seated Check Valve Flange drilling to BS EN (ISO ) 16 Coating: Internal and external blue fusion bonded epoxy 250 micron Ductile iron body K K K K K K K Series 41/39 Series 41/39 LD Free Shaft End Check Valve to BS EN / EN 558 series 48 ductile iron body Metal seated disc Coating standard: Electrostically applied epoxy resin to DIN Flange drilling 16 BS EN (ISO ) Free Shaft End Check Valve to BS EN / EN 558 series 48 ductile iron body Metal seated disc Coating standard: Electrostically applied epoxy resin to DIN internally and externally Flange drilling K K K K K K K K

7 Drilling Air Valves Equipment / Bagging-Off Equipment Series 701/10 (Water) Series 701/13 (Water) Automatic Air Release Valve Reinforced nylon body Single orifice 16 BS EN WRAS approved Isolating ball valve option Automatic Air Release Valve Ductile iron shell, Brass base, reinforced nylon body Blue Single orifice 16 BS EN WRAS approved Isolating ball valve options K K K K K K K K K Series 701/30 (Water) Series 701/40 (Water) Large Single Orifice Air Valve Ductile iron body 16 BS EN EPDM rubber WRAS approved Standard flange drilling to BS EN 1092 (ISO ) Blue Epoxy coating Isolating ball valve option K Combination Air Valve Double Orifice 16 Reinforced nylon body BS EN EPDM rubber WRAS approved Isolating ball valve option K K K K K K

8 AVK Water Valves Air Valves Continued Series 701/50 Series 701/70 (Waste Water) Combination Air Valve Double orifice 16 Cast Iron / Reinforced Nylon body BS EN EPDM rubber WRAS approved Standard flange drilling to EN 1092 (ISO ) Epoxy coated according to DIN Isolating ball valve option K K K K K K K K Series 970/21 (Water) Vented Non Return Valve for 701/40 & 701/70 outlet diameters ½, 1 and 2 Series 701/75 (Waste Water) Squat Combination Waste Water Air Valve 16 Double orifice Reinforced nylon body 10 Bar rated Standard flange drilling to EN (ISO ) inches () K K (50) 10 K Combination Waste Water Air Valve 16 Double orifice Epoxy coated mild steel body 16 Bar rated Standard flange drilling to EN (ISO ) 80 K K K Series 701/73 (Waste Water) Waste Water Air Valve Single orifice 16 Epoxy coated mild steel body 16 Bar rated Standard flange drilling to EN (ISO ) 80 K K K Series 701/79 (Waste Water) Complete Waste Water Chambered Air Valve Assembly Hydraulic test according to EN and 4 / EN12266 Working pressure range bar External box and drainage assembly connections of polypropylene 10 K

9 Drilling Accessories Equipment / Bagging-Off Equipment Series 854/00 Series 08 Equilibrium Right Angled Ductile Iron Ball Float valve Lever: Hot dipped galvanised 16 Coating: Internal and external blue fusion bonded epoxy 250 microns Stemcap complete with retaining screw and washer (Includes red/white insert caps) RAL 5017 To suit Series 01, 21, 29, 32, 36, 37, 54 and 55 gate valves K K K K K BA CTC 80 K CTC K CTC 150 K CTC K CTC Series 08/00 Series 08/00 Handwheels complete with retaining screw and washer To suit Series 21, 37, 54 and 55 gate valves Handwheels complete with retaining screw and washer To suit Series 21/35, Gate Valves K CTC K CTC 150 K CTC 200 K CTC K CTC K

10 AVK Water Valves Accessories Continued Series 41/23 Series 41/59 Lever and Weights for swing check valves RAL K K K K K Transparent guard kit for swing check valves 100% recycled virgin ABS plastic Fully compliant with health and safety legislation RAL5017 Blue casing with transparent cover All fasteners and fixings A4 Stainless steel K K K K K Series 8054 Series 90 Water Meter Boundary Box Acetal manifold Polypropylene frame, lid, sliding guard tube NBR Seals WIS WRAS approved 16 Liner included where required 8054/2211 Grade B Version - Sealed (Round Frame) CA Push-fit CA Push-fit Mild steel extension spindles Epoxy coated for small valves (35 Square) Note: Additional lengths available upto 3000 Length K

11 AVK Gas Valves Drilling Gate Valves Equipment / Bagging-Off Equipment Series 555/300 Series 555/303 Cast Iron Softseal Gate Valve Nitrile seals Fitted with double block and bleed facility - Flanges 16 - other types available on request Kitemark Approved to GIS/V7:Part1 MOP 7 Bar Supplied as bore spindle end Steel Softseal Gate Valve - Nitrile seals for use on gas Fitted with double block and bleed facility Flanges 16 - other types available on request Kitemark Approved to GIS/V7:Part1 MOP 7 Bar (Higher pressures available on request) K K K K K K K K K K K K K K Series 555/300 Series 555/370 Polyurethane coated Softseal Gate Valve to EN10290 and T/SP/CW6-2 Fitted with double block and bleed facility Flanges 16 Manufactured to GIS/V7:Part 1 MOP 7 Bar Polyurethane coated Softseal Gate Valve to EN10290 and T/SP/CW6-2 Fitted with double block and bleed facility PE Tails Manufactured to GIS/V7:Part 1 MOP 2-4 Bar CA CA CA CA CA CA CA CA CA CA CA

12 AVK Gas Valves Gate Valves Continued / Drilling Valves / Ball Valves Series 555/100 Series 555/ Cast Iron Softseal Gate Valve - Nitrile seals Fitted with double block and bleed facility Flanges 16 - other types available on request Kitemark Approved to GIS/V7:Part1 MOP 2 Bar Steel softseal gate valve Nitrile seals Fitted with double block and bleed facility Flanges 16 - other types available on request Kitemark approved to GIS/V7:Part1 MOP 7 Bar Series 158 K CA K K Series 450 Bi-directional Under Pressure Drilling Valve Cast Iron - 16 Studded Ends - Nitrile seals Approved to GIS/V7:Part 1 Maximum Working Pressure 7 bar (Supplied as bare spindle end) K CA CA CA CA CA Series 451/50 Flanged or Screwed Ball Valve - Ductile Iron Reduced bore with self indicating handle Plugged boss for block and bleed Manufactured to BS 5159 and EN 1226 Flanges 16 - other types available on request MOP 7 Bar Note: Also available for Coke oven Gas Series 451/70 K K K K K Screwed End Ball Valve Nitrile seals and PTFE seats Fitted with falsecap Kitemark approved to GIS/V 4 MOP 7 Bar ¾ -2 inches K ¾ 7 K K ½ 7 K PE Ended Ball Valve Nitrile seals and PTFE seats Fitted with Falsecap Kitemark approved to GIS/V4 and GIS/PL3 MOP 4 Bar K K

13 Drilling Ball Valves Equipment Continued / Bagging-Off Equipment Series 455/51 Series 455/57 Full Bore Screwed Ball Valve Nitrile seals and PTFE seats - Fitted with falsecap Kitemark approved to GIS/V4 MOP 7 Bar ¾ -2 inches K ¾ 7 K K Full Bore Screwed Ball Valve Nitrile seals and PTFE seats for use on gas Fitted with Falsecap Maximum Operating Pressure 7 Bar Kitemark Approved to GIS/V4 ¾ -1 inches K ¾ 7 K Series 455 Series 460 PE Ended Standpipe Valves with anti-rotation device Full Bore - Screwed/ PE Ball Valve Nitrile seals and PTFE seats for use on gas Fitted with Falsecap Maximum Operating Pressure 4 Bar Kitemark Approved to GIS/V4 and GIS/PL3 1 x32-2 x63 Flanged Steel Ball Valve Reduced Bore - Self indicating handle or Falsecap Manufactured to BS 5159 and EN Flanges 16 but other types available on request Maximum working pressure 7 Bar inches x CA x 32 4 CA x 63 4 Anti Rotation Device to fit the Series 455 Standpipe Valves CA /VP x 32 CA /VP x 63 CA K K Series 85/30 Donkin Clearbore Certus PE Ball Valve for service isolation PE 100 material - double length spigots- safety cap Kitemark approved to GIS/V7: Part 2 and EN MOP dependant on SDR Rating inches K & 10 K & 10 K

14 AVK Gas Valves Accessories Series 85/00 Series 310 Installation Kit To suit 32/63 Donkin Certus Valves Recoended for the correct and consistent installation of the valves Available with or without surface box K /63 CA /63 32 Integral Flow Limitor Kitemark approved to GIS/EFV1 (Fits in tapping tee outlet) : 75mBar-2 Bar K Series 456 Crimp Tool Set Series 85/00 50 Square Drive Tee Key To suit Donkin Certus PE Ball Valves Length Series 216 Meter Box Adaptors Donkin C Clip Design Meter Box Adaptors suitable for all types of Meter Box Kitemark approved to GIS/PL3 : 20 x ¾, 25 x ¾, 32 x ¾, 32 x 1 Zinc plated and sealed for above and below ground use x inches Length K K ,000 K ,500 CA x ¾ 20 CA x ¾ 20 CA x 1 25 The Donkin Crimp Tool Set is designed to carry out crimp connections to PE 80 service pipes One set covers sizes 32, 25, 20 and 16 Available with hexagon drive for ratchet spanner Series 207 Live Transfer Fitting Designed according to GIS/LC8:Part 4 Outlet Length: J With 16, 20, Hexagon Drive 25, 32 J HAAD12120 Drive Bolt J /ZS/010 Threaded Pivot J /ZV-009 Bearing Assembly J /ZJ-031 Shell set 20 J /ZJ-032 Shell set 25 J /ZJ-030 Body Assembly inches CA ½ ST X 1½ 7 CA ST x

15 Drilling Accessories Equipment Continued / Bagging-Off Equipment Series 217 Factory Entry Elbows Fabricated Steel and PE Transition Elbow for connecting gas services to industrial buildings Kitemark approved to GIS/PL Available with various options of PE pipe length and through wall lengths J J J J J J J J J J J J J J SDR11 x R1.5 x 345 x 1m PE80 40 SDR11 x R1.5 x 500 x 1m PE80 63 SDR11 x R2 x 150 x 1m PE80 63 SDR11 x R2 x 345 x 1m PE80 63 SDR11 x R2 x 500 x 1m PE80 63 SDR11 x R2 x 500 x 2m PE80 63 SDR11 x R2 x 610 x 1m PE80 90 SDR11 x 3 plain x 345 x 1m PE80 90 SDR11 x 3 plain x 500 x 2m PE80 90 SDR11 x 3 plain x 610 x 1m PE80 90 SDR11 x 3 plain x 610 x 2m PE SDR11 x 4 plain x 345 x 1m PE SDR11 x 4 plain x 610 x 1m PE SDR11 x 4 plain x 610 x 2m PE Series 217 Factory Entry Elbows with Split Flange Fabricated Steel and PE Transition Elbow for connecting gas services to industrial buildings without the need for a welder Kitemark approved to GIS/PL Available with various options of PE pipe length and through wall lengths CA CA CA CA CA CA CA CA CA CA x 3 x 345 Split Flange 1m PE60 Tail 90 x 3 x 500 Split Flange 2m PE60 Tail 90 x 3 x 610 Split Flange 1m PE60 Tail 90 x 3 x 610 Split Flange 2m PE60 Tail 125 x 4 x 345 Split Flange 1m PE60 Tail 125 x 4 x 610 Split Flange 1m PE60 Tail 125 x 4 x 610 Split Flange 2m PE60 Tail 180 x 6 x 345 Split Flange 1m PE60 Tail 180 x 6 x 610 Split Flange 1m PE60 Tail 180 x 6 x 610 Split Flange 2m PE60 Tail

16 AVK Gas Valves Accessories Continued Series 218 Below Ground Entry Fittings Fabricated Steel and PE Transition Fitting for underground connection and entry of gas services into domestic and coercial buildings Kitemark approved to GIS/PL J SDR11 0.5m x R¾ 5.5 J SDR11 0.5m x R1 5.5 J SDR11 0.5m x R2 5.5 J SDR11 0.5m x 3 Plain 5.5 J SDR11 1.2m x 3 Plain 5.5 J SDR11 1.1m x 4 Plain 5.5 J SDR11 1.5m x 4 Plain 5.5 J SDR11 1.2m x 4 Plain 5.5 J SDR17 1.2m x 6 Plain 2 J SDR17 1.5m x 6 Plain 2 J SDR17 1.0m x 6 Plain 2 J SDR17 1.5m x 6 Plain 2 Series 218/ Below Ground Entry Fittings with Split Flange Fabricated Steel and PE Transition Fitting for underground connection and entry of gas services into domestic and coercial buildings without the need for a welder Kitemark approved to GIS/PL Available with various options of PE pipe length and through wall lengths K K K K K K K K K SDR11 x 3 Split Flange-0.5m x 0.5m PE80 90 SDR 11 x 3 Split Flange-0.75mx 1.25m PE SDR11 x 4 Split Flange-0.5m x 1.0m PE SDR11 x 4 Split Flange-1.0m x 1.5m PE SDR11 x 4 Split Flange-0.75m x 1.25m PE SDR17 x 6 Split Flange-0.5m x 1.0m PE SDR17 x 6 Split Flange-0.75m x 1.25m PE SDR17 x 6 Split Flange-1.0m x 1.5m PE SDR17 x 6 Split Flange-1.2m x 1.5m PE

17 Drilling Accessories Equipment Continued / Bagging-Off Equipment Series 218/41 Fabricated Steel and PE Transition Fittings to take gas from the PE main through the concrete pad to connect to the ECV of a Meter or Governer Module Kitemark approved to GIS/PL Ensures dimensional compliance with SER/8 Specification every time J J J J J J J J J J J J J J J SDR9 PE80 x ¾ BS21 32 SDR9 PE80 x 1 BS21 thread 63 SDR11 PE80 x SDR11 PE100 x SDR11 PE80 x SDR11 PE100 x SDR11 PE80 x SDR11 PE100 x SDR11 PE80 x SDR11 PE100 x SDR11 PE80 x SDR17 PE80 x SDR17 PE80 x SDR17 PE80 x SDR17 PE80 x Series 219 Donkin House/ Building Entry Tee PE to steel transition fitting for connecting gas services to Buildings Kitemark approved to GIS/PL Options: Series 456 Crimp Tool Kit is available for 20, 25 and 32 sizes K SDR9 x R¾ x K SDR9 x R¾ x K SDR9 x R¾ x K SDR11 x R¾ x J SDR11 x R¾ x J SDR11 x R¾ x K SDR11 x R1 x J SDR11 x R1 x K SDR11 x R1 x K SDR11 x R1 x K SDR11 X R2 x J SDR11 X R2 x K SDR11 X R2 x J SDR11 X R2 X

18 AVK Gas Valves Accessories Continued Series 39 PE Flange Adaptors Steel Flange Adaptor with PE 100 Tail comes complete with bolt and gasket set Kitemark approved to GIS/PL3 50 to 355 Flanges 16 as standard (ASA 150 available as an option) Available with various sizes and lengths of PE 100 Pipe (PE 80 available as an option) K K K K K K K K K SDR11 x m 90 SDR11 x m 90 SDR11 x m 125 SDR11 x m 125 PE100 SDR11 x m 250 PE200 SDR11 x m 250 PE100 SDR11 x m 315 PE100 SDR11 x m 355 PE100 SDR11 x m Need technical advice? Speak to our Utilities team, they are always happy to help Speak to one of our team today on

19 Drilling Accessories Equipment Continued / Bagging-Off Equipment Series 555 Series 555 Position Indicator for Donkin Series 555 and 158 Valves up to 300 Can be retrofitted to already installed valves Cast Iron Falsecaps To suit Donkin 555 Gate Valves Recoended for use on all buried valves Other types also available for specialist and large diameter valves K /U K /UE K /ZK K /ZK K /ZK Cast Iron Handwheels Valve Access System To suit Donkin Gate Valves Note: Other types also available for specialist and large diameter valves K /ZA K /ZA K /ZA To suit Donkin 555 Gate Valves A cost effective and simple method of providing access to the spindle of buried valves Designed to use offcuts of PE Pipe K /UW/ K /UW/ Series 555/ Anti Tamper Device for Donkin 555 Valves For use when valves are fitted in areas accessible to the public Allows the valve to be closed in an emergency but not opened without a Tee Key. To suit valves CA /US

20 AVK Water Fittings Couplings Series 601 Universal Supa Coupling 16 Steel Sheraplex or Geomet fasteners EPDM seals WRAS approved materials Epoxy coated according to WIS class B J x J x J x J x l J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x Series 602 Universal Supa Stepped Coupling 16 Steel Sheraplex fasteners EPDM seals WRAS approved materials Epoxy coated according to WIS class B J x 46-63/ J x 46-63/ J x 57-74/ J x 57-74/ J x 68-85/ J x / J x / J x / J x / J x / J x / J x / J x / J x / J x / J x / J x / J x / J x / J x / J x / J x / J x / J x /

21 Drilling Couplings Equipment Continued / Bagging-Off Equipment Series 621/41 Supa Plus Tensile Resistant Coupling Stainless steel bolts EPDM seals WRAS approved materials BS EN Epoxy coated according to WIS class B J J J J J J OD Supa Plus Coupling S OD Supa Plus Coupling S OD Supa Plus Coupling S OD Supa Plus Coupling S OD Supa Plus Coupling S OD Supa Plus Coupling S Series 258 Series 631 Dedicated Fabricated Couplings Mild Steel Sheraplex fasteners or Zinc Plate & Passivated (*) WRAS Materials; EPDM Seals Epoxy Coated according to WIS class B Option: 25 Supa Maxi Tensile Straight Coupling 16 Stainless steel bolts EPDM rubber EN Epoxy coated according to GSK approval WRAS approved J J J J J J J OD Coupling SH 16 S OD Coupling SH 16 S OD Coupling SH 16 S OD Coupling SH 16 S OD Coupling SH 16 S OD Coupling SH 16 S OD Coupling SH 16 S OD Coupling J * ZP 16 S OD Coupling J SH 16 S OD Coupling J * ZP 16 S BE BE BE BE BE BE BE BE Tensile Coupling Tensile Coupling Tensile Coupling Tensile Coupling Tensile Coupling Tensile Coupling Tensile Coupling Tensile Coupling

22 AVK Water Fittings Adaptors Series 603 Series 603/4 Supa Adaptor 16 Steel Sheraplex or Geomet Coated fasteners EPDM seals WRAS approved materials Standard flange drilling to BS EN 1092 (ISO ) Epoxy coated according to WIS class B J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x CA x J x J x Supa Adaptor 16 Steel sheraplex fasteners EPDM seals WRAS approved materials Standard flange drilling to BS EN 1092 (ISO ) Epoxy coated according to WIS class B J J J J Series 265/30 Dismantling Joint Mild Steel WRAS Approved Materials Flanges to BS1092-2; EPDM Seals Epoxy Coated according to WIS class B P J J J J

23 Adaptors Drilling Equipment Continued / Bagging-Off Equipment Series 623 Series 260 Supa Plus Tensile Resistant Flange Adaptor 16 BS EN Stainless steel bolts A2/A4 nuts EPDM seals WRAS approved materials Standard flange drilling to BS EN 1092 (ISO ) Epoxy coated according to WIS class B * 100 flange to 125 pipe J J J J * 100/125 J J J Series 633 Supa Maxi Tensile Flange Adaptor 16 EN Stainless steel bolts EPDM rubber Epoxy coated according to GSK approval WRAS approved materials Fabricated Flange Adaptor for Pipes 10 & 16 WRAS Approved Materials Flanges to BS1092-2; EPDM Seals Zinc plated and Passivated Fasteners Epoxy Coated according to WIS class B J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x BE x BE x BE x BE x BE x BE x

24 AVK Water Fittings Repair Clamps Series 201/30 Series 253/30 Leadless Split Collar 16 EPDM seals Epoxy coated according to WIS class B WRAS approved materials Sealing range Supa Collar Repair Clamp 16 EPDM seals WRAS approved Epoxy coated according to WIS class B Sealing range inches x For cast iron pipes drilled & tapped ¾ BSP BE x BE x BE x BE x BE x BE x BE x BE x Series 202/30 Stainless Steel Repair Clamp 5/7/10 EPDM rubber seals WRAS approved materials Zinc plated fasteners Sealing range Length Note: Other sizes are available on request J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x J x Supa Collar Repair Clamp plain boss J x J x J x J x J x J x Supa Collar Repair Clamp ¾ BSP drilled and tapped boss J x J x J x J x J x Supa Collar Repair Clamp 1½ BSP drilled and tapped boss J x Supa Collar Repair Clamp 2 BSP Boss drilled and tapped J x J x J x J x J x J x

25 Drilling Repair Clamps Equipment Continued / Bagging-Off / Under Equipment Pressure Tees Series 202/ Series 206 Stainless Steel Repair Clamp 5/7/10 EPDM rubber seals WRAS approved materials Zinc plated fasteners Sealing range Length Note: Other sizes are available on request Series 215/30 Under Pressure Tee 7/10 EPDM seals WRAS approved materials Standard flange drilling to EN (ISO ) Sealing range Branch size Note: Other sizes available on request K x J x Single Band Repair Clamp 7/10 EPDM rubber WRAS approved Sealing range Lengths Note: Other sizes are available on request J x J x J x J x J x J x J x J x J x J x J x J x Series 204/30 Ferrule Encapsulation Collar 16 EPDM seals WRAS approved materials Epoxy coated according to WIS class B Sealing range P P P

26 AVK Gas Fittings Repair Clamps Series 253/ Series 253 Supa Collar Universal Repair Clamp Kitemarked to GIS/LC8:Part 4 MOP 7 Bar Sealing range Note: Available with 2 Boss Supa Collar Universal Repair Clamp complete with 2 boss Kitemarked to GIS/LC8:Part 4 MOP 7 Bar Sealing range Note: Available Plain inches/ J / J / J / Series 202/31 inches/ J / J / J / J / J / J / Stainless Steel Repair Clamp Nitrile Rubber Seals Zinc plated and passivated fasteners Approved to GIS/LC8: Part 4 Sealing range Length Note: Also available with threaded boss Note: Other sizes available on request CA x CA x Series 203/ Gas Pipesaver Single Band Repair Clamp Designed according to GIS/LC8:part 4 Sealing range Length (Supplied in bags of 10) Series 202/31 Stainless Steel Repair Clamp Nitrile Rubber Seals fitted with 2 Boss Zinc Plated and passivated fasteners Approved to GIS/LC8: Part 4 Other boss sizes available on request Sealing range Length Note: Other sizes available on request CA x CA x CA x CA x J x J x J x J x J x J x

27 Drilling Tees Equipment / Bagging-Off Equipment Series 257 Ductile Iron Universal Under Pressure Tee with 16 Flange Kitemark approved to GIS/LC8: Part 4 Sealing range: MOP 7 Bar (Suitable for Flowstopping) x /inches J x 100/4 80 J x 150/6 80 J x 200/8 80 J x 250/10 80 J x 300/12 80 J x 100/4 100 J x 150/6 100 J x 200/8 100 J x 250/ J x 300/ J x 150/6 150 J x 200/8 150 J x 250/ J x 300/ J x 200/8 200 J x 250/ J x 300/ J x 250/ J x 300/ J x 300/ Series 215/ Stainless steel Under Pressure Tee Nitrile seals Zinc plated and passivated fasteners Kitemarked to GIS/LC8:Part 4 16 Flange range: Pipe Size: Length to suit outlet size Note: Other sizes are available on request Fastrack service available CA x CA x CA x CA x CA x J x CA x J x J x J x J x J x CA x J x CA x CA x J x J x J x J x J x J x J x J x J x J x J x CA x J x J x

28 AVK Gas Fittings End Caps Series 248/ Donkin Universal Cast Ductile Iron End Cap Nitrile seals Kitemark Approved to GIS/PL3 MOP 2 Bar Note: Above 300 end caps are dedicated sizes and are available as cast products for CIAB pipe up to 24 and fabricated products for all other pipe sizes up to 48 Option: Available in Black CA CA J J CA J CA CA

29 & STRONGER TOGETHER The LEADING UK MANUFACTURER to offer an extensive range of pipeline equipment including valves, fittings and accessories WATER AND WASTE WATER FIRE PROTECTION GAS Gate valves Ball valves Non-return valves Hydrants AVK Pentoflow - Water mains to meter Butterfly valves Air valves Knifegate valves Penstocks Tees Repair clamps Couplers and adaptors PE ball valves Gas mains to meter range Dismantling joints AVK valve installation tracker Water T: +44 (0) E: customerservice@avkuk.co.uk Gas T: +44 (0) E: gasenquiries@avkuk.co.uk

30 TALIS Service Fittings Ferrule Straps, Stopcocks and Chambers Self Tapping Ferrule Straps Description Nominal size P90633 E Polyethylene Pipe x Pushfit P90634 E Polyethylene Pipe x Pushfit P90635 E Polyethylene Pipe x Pushfit P90636 E Polyethylene Pipe x Pushfit P90637 E Polyethylene Pipe x Pushfit P90638 E Polyethylene Pipe x Pushfit P90639 E Polyethylene Pipe x Pushfit P90640 E Polyethylene Pipe x Pushfit P90641 E Polyethylene Pipe x Pushfit P90642 E Polyethylene Pipe x Pushfit P90643 E Polyethylene Pipe x Pushfit P90644 E Polyethylene Pipe x Pushfit P90645 E Polyethylene Pipe x Pushfit P90646 E Polyethylene Pipe x Pushfit P90647 E Polyethylene Pipe x Pushfit Stopcocks Description Nominal size P62390 E5252 Talbot Plastic Stopcock P62391 E5874 Talbot Plastic Stopcock P62392 E5882 Talbot Plastic Stopcock P94924 SV5402FCR EBCO Gunmetal Stopcock BS5433 ½ P94925 SV5403FCR EBCO Gunmetal Stopcock BS5433 ¾ P94926 SV5404FCR EBCO Gunmetal Stopcock BS P94927 SV5406FCR EBCO Gunmetal Stopcock BS5433 1½ P94928 SV5408FCR EBCO Gunmetal Stopcock BS Stopcock Chamber Systems Description J90920 E3199 Talbot Stopcock Chamber Small Base Water Box 700 Tube P63795 E7226 Talbot Stopcock Chamber Large Base Water Box 700 Tube P63796 E7057 Talbot Stopcock Chamber Large Base Gas Box 700 Tube P A Surface Box Assembly Water P A Surface Box Assembly Gas Black Lid CA A Surface Box Assembly Gas Yellow Lid J Talbot Stopcock Chamber Guard Pipe 6 x 700 Pvc J Talbot Stopcock Chamber Base Small 6 J Talbot Stopcock Chamber Universal Top Adaptor 154

31 Viking Johnson Couplings & Adaptors QuickFit Couplings Application Information: The QuickFit Coupling range is designed to connect Plain Ended Pipes with similar outside diameters. The full range includes Couplings and Flange Adaptors to suit Pipes with nominal sizes between 50 (2") and 300 (12"). One fitting can accoodate PVC, coated and uncoated Steel Pipes and Ductile Iron Pipes as well. Customer benefits: QuickFit products accoodate angular deflection between Pipes. This makes installation easy and allows pipeline movement, such as ground settlement Long radius curves can also be accoodated, avoiding the need for special fittings with Couplings up to 6º and Flange Adaptors to 3º No need for specialist tools just a 19 A/F Deep Reach Socket and Torque Wrench QuickFit Couplings are capable of accoodating 10 of expansion/ contraction per fitting, Flange Adaptors 5. This reduces the need for supplementary expansion joints or bellows All cast QuickFit Flange Adaptors are supplied as standard with an extended Sealing Face, and are suitable for use with Wafer Style (Butterfly) Valves Fabricated Flange Adaptors can be supplied with either an extended Sealing Face or Clear Bore option Size range Working Bolt size No. Gasket End ring Weight pressure diameter mould Min Max OD kg bar x length No. J89001 VJ M12 x / J88887 VJ M12 x / J89002 VJ M12 x / J11050 VJ M12 x / J83303 VJ M12 x /10 4 J89003 VJ M12 x / J13038 VJ M12 x / J89004 VJ M12 x / J89005 VJ M12 x / J11052 VJ M12 x / J89006 VJ M12 x / J13039 VJ M12 x / J11398 VJ M12 x / J11399 VJ M12 x / Test pressure = 1.5 x working pressure. 155

32 Viking Johnson Couplings & Adaptors QuickFit Flange Adaptors Application Information: The QuickFit Coupling range is designed to connect Plain Ended Pipes with similar outside diameters. The full range includes Couplings and Flange Adaptors to suit Pipes with nominal sizes between 50 (2") and 300 (12"). One fitting can accoodate PVC, coated and uncoated Steel Pipes and Ductile Iron Pipes as well. Customer benefits: QuickFit products accoodate angular deflection between Pipes. This makes installation easy and allows pipeline movement, such as ground settlement Long radius curves can also be accoodated, avoiding the need for special fittings with Couplings up to 6º and Flange Adaptors to 3º No need for specialist tools just a 19 A/F Deep Reach Socket and Torque Wrench QuickFit Couplings are capable of accoodating 10 of expansion/ contraction per fitting, Flange Adaptors 5. This reduces the need for supplementary expansion joints or bellows All cast QuickFit Flange Adaptors are supplied as standard with an extended Sealing Face, and are suitable for use with Wafer Style (Butterfly) Valves Fabricated Flange Adaptors can be supplied with either an extended Sealing Face or Clear Bore option 156

33 Drilling QuickFit Equipment Flange Adaptors / Bagging-Off Continued Equipment Size range Flange detail Min Max Flange OD (B) Flange thickness (T) Overall length (A) S Bore (S) BA2203 VJ Flange drilling 5010, 16, 2, 5, 4010, 16, 25, 40 Bolt size No. diameter x length Gasket mould No. Weight kg 2-M12 x / J89007 VJ , 1610, 16 2-M12 x / J83304 VJ J88840 VJ ,16, 2, 5, 4010, 16, 25, , 16, 2, 5, 4010, 16, 25, 40 4-M12 x / M12 x / J89008 VJ , 1610, 16 4-M12 x / J88841 VJ , 1610, 16 4-M12 x / J89009 VJ , 1610, 16 4-M12 x / J89010 VJ , 1610, 16 4-M12 x / J88842 VJ , 1610, 16 4-M12 x / J89011 VJ , 1610, 16 4-M12 x / J13109 VJ , 1610, 16 4-M12 x / J88843 VJ , 1610, 16 6-M12 x / J88844 VJ , 1610, 16 6-M12x / Test pressure = 1.5 x working pressure. 157

34 Viking Johnson Couplings & Adaptors FlexLock Couplings Application Information: The FlexLock system provides a self-anchoring method of joining ductile iron or steel pipes and offers a cost-effective, quick and simple alternative to traditional anchoring systems such as site welding, harnessing or thrust blocks. Customer benefits: FlexLock permits angular deflection between pipes, allowing for normal pipeline movement such as ground settlement. Long radius curves can also be accoodated, reducing the need for special fittings. FlexLock Couplings allow for a total angular deflection of ±6 (±3 for Flange Adaptors) Cost-effective: FlexLock can provide significant cost savings compared to non-locking couplings with a harnessing system Restrains pressure thrusts without thrust blocks at bends Convert cut lengths of pipe into flanged pipes allows use of pipe off-cuts Working pressure of 16 bar on water up to and including 200 and 10 bar for 250 and 300. For gas applications a working pressure of 6 bar can be achieved The ability to provide angular deflection in any plane is a particular advantage a harness assembly can provide angular deflection only in one plane 158

35 Drilling FlexLock Equipment Couplings / Bagging-Off Continued Equipment Pipe norm Pipe OD Pipe material Bolt size No. diameter x length Overall length End ring OD (A) Sleeve length x thickness (S) Minimum Setting gap Maximum Working pressure bar J11731 VJ /2" 60.3 Steel 2-M12 x x , J11701 VJ /2.5" 76.1/77 Steel 2-M12 x x , J11702 VJ /3" 88.9 Steel 4-M12 x x , J11705 VJ /3" 98 Ductile Iron 4-M12 x , J11703 VJ /4" Steel 4-M12 x , J11706 VJ /4" 118 Ductile Iron 4-M12 x , J88839 VJ /6" Steel 6-M12 x , J88839 VJ /6" Steel 6-M12 x , J11707 VJ /6" 170 Ductile Iron 6-M12 x , J49183 VJ /8" Steel 8-M12 x , J11708 VJ /8" 222 Ductile Iron 6-M16 x , J11709 VJ /10" 273 Steel 12-M16 x , J11709 VJ /10" 274 Ductile 12-M16 x , J31717 VJ /12" Steel 12-M16 x ,667/ J31717 VJ /12" 326 Ductile 12-M16 x ,667/ Gasket mould Coupling weight kg FlexLock bolt torques: M12 = 55-65Nm and M16 = Nm. 159

36 Viking Johnson Couplings & Adaptors FlexLock Flange Adaptors Application Information: The FlexLock system provides a self-anchoring method of joining ductile iron or steel pipes and offers a cost-effective, quick and simple alternative to traditional anchoring systems such as site welding, harnessing or thrust blocks. Customer benefits: FlexLock permits angular deflection between pipes, allowing for normal pipeline movement such as ground settlement. Long radius curves can also be accoodated, reducing the need for special fittings. FlexLock Couplings allow for a total angular deflection of ±6 (±3 for Flange Adaptors) Cost-effective: FlexLock can provide significant cost savings compared to non-locking couplings with a harnessing system Restrains pressure thrusts without thrust blocks at bends Convert cut lengths of pipe into flanged pipes allows use of pipe off-cuts Working pressure of 16 bar on water up to and including 200 and 10 bar for 250 and 300. For gas applications a working pressure of 6 bar can be achieved The ability to provide angular deflection in any plane is a particular advantage a harness assembly can provide angular deflection only in one plane 160

37 Drilling FlexLock Equipment Flange Adaptors / Bagging-Off Continued Equipment Pipe norm Pipe OD Pipe material Bolt size No. diameter x length Sleeve length x thickness (S) Overall length Flange thickness (F) Sleeve length (S) Flange nominal drilling BS EN Working pressure bar Minimum Setting gap Maximum J11721 VJ /2" 60.3 Steel 2-M12 x / , J11751 VJ /2.5" 76.1 Steel 2-M12 x /6510/ , J11752 VJ /3" 88.9 Steel 4-M12 x / , J11756 VJ /3" 98 Ductile Iron 4-M12 x / ,630 4 J11753 VJ /4" Steel 4-M12 x / , J11757 VJ /4" 118 Ductile Iron 4-M12 x / , J31732 VJ /6" Steel 8-M12 x / ,369 8 J11758 VJ /6" 170 Ductile Iron 8-M12 x / ,369 8 J88851 VJ /8" Steel 8-M12 x ,370 8 J88852 VJ /8" Steel 8-M12 x , J88853 VJ /8" 222 Ductile Iron 6-M16 x , J11759 VJ /8" 222 Ductile Iron 8-M16 x "E , J11762 VJ /10" 273 Steel 12-M16 x /16* , J11762 VJ /10" 274 Ductile Iron 12-M16 x /16* , J31718 VJ /12" Steel 12-M16 x /16* ,667/ J31718 VJ /12" 326 Ductile Iron 12-M16 x /16* ,667/ FlexLock bolt torques: M12 = 55-65Nm and M16 = Nm. * Working pressure rating is less than flange rating. Gasket mould FA weight kg 161

38 Viking Johnson Couplings & Adaptors AquaFast Couplings Application Information: AquaFast is a quick and easy to install product for Polyethylene pipe connections, providing an alternative solution to electrofusion and butt fusion for all weather and trench conditions. It is a simple fit and forget installation without the need for an internal liner or expensive trench equipment. Customer benefits: Improved design for easy alignment especially on oval and coiled pipes Coupling can be used for repair - no internal restriction ideal for Sewage applications No requirement for a support liner, torque wrench or any other specialist equipment on site Reduced stockholding - One product can connect one nominal pipe size with coon SDRs 5O years design life expectancy Saves time and effort as Contractor only has to identify PE pipe nominal size to select correct fitting Minimal number of bolts to tighten Supplied as standard with EPDM gasket approved by WRAS for use with potable water Corrosion protection Metal components are coated with Rilsan Nylon 11 which is WRAS approved for use with potable water 162

39 Drilling AquaFast Equipment Couplings / Bagging-Off Continued Equipment AquaFast Couplings Pipe OD Bolt size No. diameter x length Dimensions Max (A) Diameter (B) Setting gap Max gap Weight kg J14645 VJ M12 x J14646 VJ M12 x J14647 VJ M12 x J14648 VJ M12 x J14649 VJ M12 x J14650 VJ M12 x J14651 VJ M12 x J14652 VJ M12 x J14653 VJ M12 x J14654 VJ M16 x J14655 VJ M16 x J14656 VJ M16 x J14657 VJ M16 x Test pressure = 1.5 x working pressure. AquaFast Couplings Large Diameter Pipe OD Bolt size No. diameter x length Dimensions Max (A) Length Working pressure bar Insertion depth - nominal Setting gap Weight kg J14682 VJ M16 x J14683 VJ M16 x J14684 VJ M16 x

40 Viking Johnson Couplings & Adaptors AquaFast Flange Adaptors Application Information: AquaFast is a quick and easy to install product for Polyethylene pipe connections, providing an alternative solution to electrofusion and butt fusion for all weather and trench conditions. It is a simple fit and forget installation without the need for an internal liner or expensive trench equipment. Customer benefits: Improved design for easy alignment especially on oval and coiled pipes Coupling can be used for repair - no internal restriction ideal for Sewage applications No requirement for a support liner, torque wrench or any other specialist equipment on site Reduced stockholding - One product can connect one nominal pipe size with coon SDRs 5O years design life expectancy Saves time and effort as Contractor only has to identify PE pipe nominal size to select correct fitting Minimal number of bolts to tighten Supplied as standard with EPDM gasket approved by WRAS for use with potable water Corrosion protection Metal components are coated with Rilsan Nylon 11 which is WRAS approved for use with potable water 164

41 Drilling AquaFast Equipment Flange Adaptors / Bagging-Off Continued Equipment AquaFast Flange Adaptors Pipe OD Flange drillings Tee bolt size No. diameter x length Dimensions Max (A) Diameter (B) Bore (C) Flange thickness (D) Setting gap J14658 VJ /6510, 16 2-M12 x J14659 VJ /8010, 16 2-M12 x J14660 VJ /8010, 16 2-M12 x J14661 VJ , 16 2-M12 x J14662 VJ /12510, 16 2-M12 x J14663 VJ , 16 4-M12 x J14664 VJ , 16 4-M12 x J14665 VJ , 16 4-M12 x J14666 VJ , 16 4-M12 x J14667 VJ , 16 4-M16 x J14668 VJ , 16 6-M16 x J14669 VJ , 16 6-M16 x J14670 VJ , 16 6-M16 x Max gap Weight kg All flange drilled to BS EN (formerly BS 4504) /BS EN ISO and 16. AquaFast Flange Adaptors Large Diameter Pipe OD Flange drillings Tee bolt size No. diameter x length Dimensions Insertion depth Max (A) Length Working pressure bar Min Max J14685 VJ , M16 x J14686 VJ , M16 x J14687 VJ , M16 x J14688 VJ , M16 x J14689 VJ , M16 x J14690 VJ , M16 x J14691 VJ , M16 x Setting gap Weight kg 165

42 Viking Johnson Couplings & Adaptors AquaGrip Couplings Application Information: A high Performance Polyethylene Jointing System. The AquaGrip range was developed in response to demand for a simple, high performance end load restraint (Type 1) mechanical method of joining polyethylene Pipes. AquaGrip products are designed to support and grip PE Pipes to prevent pipe collapse and pull out. Customer benefits: Slip-on Coupling without centre stop or obstruction making it easier to make repairs to existing pipelines No need to dismantle products to install Same size bolt throughout range means just one torque wrench for all pipe sizes Substantial axial pipe adjustment up to 50 ideal for making pipe and valve insertions into existing lines. No need for precise cutting of the pipes or for machined pipe ends Versatile range. Straight Couplings for simple, convenient repairs, or new lay connections. Flange Adaptors to introduce Valves and Flanged fittings or connect to existing Flanged pipework AquaGrip has been tested and found to comply with the requirements of the Water Supply (Water Fittings) Regulations 1999 for England and Wales, the Water Bye-laws 2000 Scotland and the Water Regulations Northern Ireland Supplied complete with liners for PE Pipes Flange Adaptors and straight Couplings designed to the full Type 1 performance requirements of WIS AquaGrip Coupling assembly joins PE Pipe to PE Pipe. Pipe OD Dimensions (A) (C) No. of Bolts Bolts size Gasket mould No. Weight kg J14057 VJ M12 x J14060 VJ M12 x J14062 VJ M12 x J14065 VJ M12 x J14067 VJ M12 x J14075 VJ M12 x

43 Drilling AquaGrip Equipment Flange Adaptors / Bagging-Off Equipment Application Information: A high Performance Polyethylene Jointing System. The AquaGrip range was developed in response to demand for a simple, high performance end load restraint (Type 1) mechanical method of joining polyethylene Pipes. AquaGrip products are designed to support and grip PE Pipes to prevent pipe collapse and pull out. Customer benefits: Slip-on Coupling without centre stop or obstruction making it easier to make repairs to existing pipelines No need to dismantle products to install Same size bolt throughout range means just one torque wrench for all pipe sizes Substantial axial pipe adjustment up to 50 ideal for making pipe and valve insertions into existing lines. No need for precise cutting of the pipes or for machined pipe ends Versatile range. Straight Couplings for simple, convenient repairs, or new lay connections. Flange Adaptors to introduce Valves and Flanged fittings or connect to existing Flanged pipework AquaGrip has been tested and found to comply with the requirements of the Water Supply (Water Fittings) Regulations 1999 for England and Wales, the Water Bye-laws 2000 Scotland and the Water Regulations Northern Ireland Supplied complete with liners for PE Pipes Flange Adaptors and straight Couplings designed to the full Type 1 performance requirements of WIS AquaGrip Flange Adaptor assembly joins PE Pipe to Flanged equipment. Pipe OD Dimensions (A) (C) No. of T Bolts T Bolts size Flange specification nom. Gasket mould No. Weight kg J14005 VJ M12 x /8010/ J14010 VJ M12 x / J14012 VJ M12 x & J14015 VJ M12 x & J14017 VJ M12 x & J14020 VJ M12 x &

44 Viking Johnson Couplings & Adaptors UltraGrip Couplings Application Information: UltraGrip products are designed to offer a solution to joining Plain Ended Pipes and contain an end load resistant mechanism, that grips and seals onto a variety of pipe materials including Cast Iron, Ductile Iron, Steel, PVC and PE. Customer benefits: High-level of performance in both water and gas applications Increased diameter range and wide tolerance delivers a reduction in stock holding costs Gripping product can be converted to non-gripping flexible product by removing grippers, to permit axial movement Available in Nitrile for gas and EPDM for water, materials approved to WRAS as well as KTW and DVGW W270 ( ) for potable water applications Reversible captive bolts for quick and easy installation New design based on proven technology to deliver total peace of mind Sizes from 40 to 600 Looking for PE pipe systems? Utilities pages

45 Drilling UltraGrip Equipment Couplings / Bagging-Off Continued Equipment Nom. size Dimensions Size range Insertion depth (D) Overall Sleeve Bolts Weight Min Max Min Max (A) (B) (L) (T) No. size Type kg J88823 VJ M12 x 70 HRH 5.76 J88948 VJ M12 x 70 CSX 6.13 J88824 VJ M12 x 70 HRH 6.86 J88825 VJ M12 x 70 HRH 8.54 J14507 VJ M16 x 90 CSX J14509 VJ M16 x 90 CSX J14511 VJ M16 x 90 CSX J14513 VJ M16 x 90 CSX J14515 VJ M16 x 90 CSX J14517 VJ M16 x 120 CSX J14629 VJ M16x 120 CSX 63.8 J49177 VJ M16 x 120 CSX J49178 VJ M16x 120 CSX J88925 VJ M16x 150 HRH J88967 VJ M20 x 150 HRH J88942 VJ M20 x 150 HRH J88927 VJ M20 x 150 HRH J88928 VJ M20 x 150 HRH Up to 8 angular deflection. 169

46 Viking Johnson Couplings & Adaptors UltraGrip Flange Adaptors Application Information: UltraGrip products are designed to offer a solution to joining Plain Ended Pipes and contain an end load resistant mechanism, that grips and seals onto a variety of pipe materials including Cast Iron, Ductile Iron, Steel, PVC and PE. Customer benefits: High-level of performance in both water and gas applications Increased diameter range and wide tolerance delivers a reduction in stock holding costs Gripping product can be converted to non-gripping flexible product by removing grippers, to permit axial movement Available in Nitrile for gas and EPDM for water, materials approved to WRAS as well as KTW and DVGW W270 ( ) for potable water applications Reversible captive bolts for quick and easy installation New design based on proven technology to deliver total peace of mind Sizes from 40 to 600 Looking for ductile iron pipes? Utilities pages

47 Drilling UltraGrip Equipment Flange Adaptors / Bagging-Off Continued Equipment Nom. size Size range Flange nom. size Flange drillings Type Insertion depth (D) Dimensions Bolts Weight kg Min Max Min Max (C) (A) (B) (T) No. size Type J89012 VJ , M12 x 70 HRH 4.83 J49179 VJ , M12 x 70 CSX 4.83 BA2993 VJ /65 10, M12 x 70 HRH 5.68 J88838 VJ , M12 x 70 HRH 5.87 J49180 VJ , M12 x 70 HRH 6.82 J14574 VJ , M16 x 90 HRH J14575 VJ , M16 x 90 HRH J14576 VJ , M16 x 90 HRH J14577 VJ , M16 x 90 CSX J14578 VJ , M16 x 90 CSX J14628 VJ , M16 x 120 HRH J14579 VJ , M16 x 120 HRH 44.5 J49181 VJ , M16 x 120 CSX J49182 VJ , M16 x 120 CSX J88929 VJ , M16 x 150 HRH J88922 VJ , M20 x 150 HRH BD6791 VJ , M20 x 150 HRH J88930 VJ , M20 x 150 HRH J88931 VJ , M20 x 150 HRH Full Flange Sealing Face, can be used on Wafer-type Butterfly Valves. Up to 4 angular deflection. 171

48 Viking Johnson Couplings & Adaptors MaxiFit Couplings Standard Sleeve & Long Sleeve Application Information: MaxiFit Universal Pipe Couplings are designed to accoodate Plain Ended Pipes with different outside diameters. One fitting is able to connect a wide variety of Pipe materials including Steel, Ductile Iron, PVC, Cast Iron, GRP and Asbestos Cement Pipes amongst others. Customer benefits: Design life expectancy of 50 years, established by rigorous Accelerated Age Testing which subjects product to working pressure at 80 C for 1,000 hours Wide tolerances permit lower stock holding Extensive range is available in sizes 40 to 300 All models accoodate angularity between pipes which allows for normal pipeline movement caused by ground settlement. Couplings and reducing couplings allowing for 6 total angular deflection (3 total on the Flange Adaptors) A rigorous Bolt Torque test is completed to confirm that the Bolt, End Ring and Adaptor Body are capable of withstanding Bolt over-tightening to 1.5 times maximum recoended torque 172

49 Drilling MaxiFit Equipment Couplings / Standard Bagging-Off Sleeve Equipment & Long Sleeve Continued MaxiFit Coupling Standard Sleeve Nom. size Size range Diameter Overall length Setting gap Min Max (M) (L) (A) x (T) Min Max Bolt No. Dia x length J11780 VJ x M12 x J11781 VJ x M12 x /1 3 1 J11782 VJ x M12 x / J11783 VJ x M12 x / J11784 VJ x M12 x / J11785 VJ x M12 x /6 6 2 J11786 VJ x M12 x / J11787 VJ x M12 x / J11788 VJ x M12 x / J11789 VJ x M12 x / J11790 VJ x M12 x / J11791 VJ x M12x / Gasket mould No. Weight kg Max threaded outlet inches MaxiFit Xtra Coupling Long Sleeve J89013 VJ x M12 x / J89014 VJ x M12 x / J14641 VJ x M12 x / J11774 VJ x M12 x / J11775 VJ x M12 x /6 9 2 J11776 VJ x M12 x / J89015 VJ x M12 x / J89016 VJ x M12 x / J14640 VJ x M12 x / J89017 VJ x M12 x / J89018 VJ x M12 x /

50 Viking Johnson Couplings & Adaptors MaxiFit Couplings Large Diameter Application Information: MaxiFit Universal Pipe Couplings are designed to accoodate Plain Ended Pipes with different outside diameters. One fitting is able to connect a wide variety of Pipe materials including Steel, Ductile Iron, PVC, Cast Iron, GRP and Asbestos Cement Pipes amongst others. Customer benefits: Design life expectancy of 50 years, established by rigorous Accelerated Age Testing which subjects product to working pressure at 80 C for 1,000 hours Wide tolerances permit lower stock holding Extensive range is available in sizes 350 to 700 All models accoodate angularity between pipes which allows for normal pipeline movement caused by ground settlement. Couplings and reducing couplings allowing for 6 total angular deflection (3 total on the Flange Adaptors) A rigorous Bolt Torque test is completed to confirm that the Bolt, End Ring and Adaptor Body are capable of withstanding Bolt over-tightening to 1.5 times maximum recoended torque 174

51 Drilling MaxiFit Equipment Couplings / Large Bagging-Off Diameter Equipment Continued OD range Min Max Dimensions End ring diameter (A) Gasket mould No. Bolts No. dia x length Weight kg J11140 VJ M12 x J11141 VJ M12 x J89019 VJ M12 x J11150 VJ M12 x J89020 VJ M12 x J88812 VJ M12 x J11142 VJ M12 x J88811 VJ M12 x BB9340 VJ M12 x J89021 VJ M12 x BA3443 VJ M12 x J89022 VJ M12 x J83300 VJ M12 x J11143 VJ M12 x J89023 VJ M12 x J89024 VJ M12 x J11144 VJ M12 x J89025 VJ M12 x BB8687 VJ M12 x J11145 VJ M12 x J88945 VJ M12 x J11151 VJ M12 x J89026 VJ M12 x J89027 VJ M12 x J89028 VJ M12 x Can t find what you re looking for? Speak to one of our team today on

52 Viking Johnson Couplings & Adaptors MaxiDaptors Large Diameter Flange Adaptor 16 Application Information: MaxiFit Universal Pipe Couplings are designed to accoodate Plain Ended Pipes with different outside diameters. One fitting is able to connect a wide variety of Pipe materials including Steel, Ductile Iron, PVC, Cast Iron, GRP and Asbestos Cement Pipes amongst others. Customer benefits: Design life expectancy of 50 years, established by rigorous Accelerated Age Testing which subjects product to working pressure at 80 C for 1,000 hours Wide tolerances permit lower stock holding Sizes from 350 to 600 All models accoodate angularity between pipes which allows for normal pipeline movement caused by ground settlement. Couplings and reducing couplings allowing for 6 total angular deflection (3 total on the Flange Adaptors) A rigorous Bolt Torque test is completed to confirm that the Bolt, End Ring and Adaptor Body are capable of withstanding Bolt over-tightening to 1.5 times maximum recoended torque 176