OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
|
|
- Aldous Short
- 5 years ago
- Views:
Transcription
1 AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1
2 2
3 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION 6-9 ONSHORE PRODUCTION PIPELINE GAS PIPELINE STORAGE OIL LIQUIFIED NATURAL GAS PROCESS WATER INDUSTRIAL WASTE WATER FIRE PROTECTION AVK FLOW CONTROL SEGMENTS
4 AVK FLOW CONTROL l OIL & GAS PLANTS 4
5 AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS AVK FLOW CONTROL DELIVERS ADVANCED VALVE SOLUTIONS BASED ON APPLICATION KNOWLEDGE AND UNDERSTANDING, COMPETENT LOCAL SUPPORT AND INTERNATIONAL COORDINATION. BACKED UP BY THE LEADING COMPANIES AND MANUFACTURERS OF INDUSTRIAL VALVES, YOU CAN EXPECT HIGH AND CONSISTENT QUALITY AND SERVICE EXPECT APPLICATION KNOWLEDGE AND UNDERSTANDING EXPECT COMPETENT LOCAL SUPPORT EXPECT INTERNATIONAL COORDINATION 5
6 AVK FLOW CONTROL l OIL & GAS PLANTS OFFSHORE PRODUCTION Double eccentric high Centric butterfly with loose or fixed liner Triple eccentric Full bore ball High pressure ball Knife gate Strainer Check 6
7 High butterfly valve High Double eccentric high Centric butterfly Wafer and Lugged Versions. Various Body and Disc Materials available. Electric and Pneumatic Actuation. Double eccentric design. Available in many high-quality materials. Available as wafer, lugged and double flanged type. Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design. Wide range of materials for disc and loose liner, with ductil iron or carbon steel body in wafer, lug or u-section type, all kind of actuators. Wafer/lug type: Up to DN800 DN50 DN900 Up to DN1200 DN25 DN1600 / DN25 DN600 PN10, 16, 25 or Bar (class 150) 50 Bar (class 300) Full vacuum to 25 Bar / Up to 20 Bar Up to +200 C Up to +425 C -50 to +230 C -50 to +140 C / -40 to +200 C Rubberlined butterfly Swing check Valves Triple offset metal to metal seat butterfly valve General service knife gate valve Complete range of butterfly in wafer, semi-lug, tappedlug, u-section, single flange and double flange. Body and bonnet in ductile iron. Stem and hinge in stainless steel. Lever and weight or lever and spring. Body types: Wafer, lug and flange type, various body and disc materials available. Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.) DN50 DN2200 DN50 DN600 DN80 DN1400 Up to DN1200 Up to 25 Bar Max. working pressure 50 bar (up to 100 bar) 10 Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200) Up to +200 C Up to +700 C -20 to +250 C 7
8 AVK FLOW CONTROL l OIL & GAS PLANTS 8
9 Knife Gate Valve TECslide flat plate gate valve High pressure ball Strainer Bi-directional high valve specially designed to withstand high pressures. Resilient seated valve, Fully lugged for end of line with a counter flange or fully lugged between flanges. Valve components available in various materials. Electric, hydraulic or pneumatic actuation. Shut-off valve with a three-part modular design. The slider plate is moved over a rising spindle. Soft and metal seated. On/off and control function. Custom made. Alternative: Ceramic parts Tungsten carbide coating, On/off and control function. Body & cap: Carbon steel Filter screen: Stainless steel Sealing: Asbestos-free material DN50 to DN1800 DN50 to DN1200 DN25 DN1400 / DN25 DN250/DN1000 DN15 DN400 (PN16) DN15 DN200 (PN40) PN10 PN250 and ANSI B16.5 DN10 DN40 From 16 to 400 Bar / From 16 to 420 Bar PN16, PN40-40 C to +300 C Up to +550 C -196 C to +550 C Tmax C (PN16) Tmax C (PN40) Check Check Metal seated check. Flangeless wafer type. Seat bonded to the body DN32 DN600 DN to +400 C -40 to +200 C 9
10 AVK FLOW CONTROL l OIL & GAS PLANTS ONSHORE PRODUCTION Double eccentric high Centric butterfly with loose or fixed liner Triple eccentric Full bore ball High pressure ball Knife gate Gate- and globe Check 10
11 High High Double eccentric high Centric butterfly Wafer and Lugged Versions, Various Body and Disc Materials available Double eccentric design. Available in many high-quality materials. Available as wafer, lugged and double flanged type. Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design. Wide range of materials for disc and loose liner, with ductil iron or carbon steel body in wafer, lug or u-section type, all kind of actuators. Wafer/lug type: Up to DN800 DN50 DN900 Up to DN1200 DN25 DN1600 / DN25 DN600 PN10, 16, 25 or Bar (class 150) 50 Bar (class 300) Full vacuum to 25 Bar / Up to 20 Bar Up to +200 C Up to +425 C -50 to +230 C -50 to +140 C / -40 to +200 C Rubberlined Triple offset metal to metal seat butterfly valve Ball valve full bores Full bore ball Complete range of in wafer, semi-lug, tapped-lug, u-section, single flange and double flange. Body types: Wafer, lug and flange type, various body and disc materials available. Floating split body forged. Available as Double block and bleed. Available with trunnion mounted or floating ball design. Designed for any service condition (high temperature, cryogenic, etc.). Various materials on request. Body and ball in stainless steel. Seats in PTFE. Manually pneumatically or electrically operated. DN50 DN2200 DN80 DN1400 DN15 DN200 DN15 DN100 Up to 25 Bar Max. working pressure 50 bar (up to 100 bar) PN6 PN420 Up to 63 Bar Up to +200 C Up to +700 C From -190 C +435 C Up to +650 C 11
12 AVK FLOW CONTROL l OIL & GAS PLANTS High pressure ball General service knife gate valve TECslide flat plate gate valve Gate Valve Soft and metal seated. On/off and control function. Custom made. Alternative: Ceramic parts Tungsten carbide coating, On/off and control function. Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.) Shut-off valve with a three-part modular design. The slider plate is moved over a rising spindle. Welded ends, flange ends. For water, steam, condensate and gases, Atex, chemical applications. DN25 DN1400 / DN25 DN250/DN1000 Up to DN1200 DN50 to DN1200 DN50 DN350 From 16 to 400 Bar / From 16 to 420 Bar 10 Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200) DN10 DN40 Max 400 Bar -196 C to +550 C -20 to +250 C Up to +550 C Up to +600 C 12
13 Globe Valve Control Globe Valve Swing check Valve Check valve Welded ends, flange ends. For water, steam, condensate and gases, Atex, chemical applications. Stop valve designed to open and stop a flow. Can be used as regulating device. For water, steam, condensate and gases. Body and bonnet in ductile iron. Stem and hinge in stainless steel. Lever and weight or lever and spring. Metal seated check. DN15 DN125 DN10 DN300 DN50 DN600 DN32 DN600 Max 400 Bar Up to 40 Bar Up to +600 C Up to +560 C -10 to +400 C Knife Gate Valve Check valve Check valve Check valve Bi-directional high valve specially designed to withstand high pressures. Resilient seated valve, Fully lugged for end of line with a counter flange or fully lugged between flanges. Valve components available in various materials. Electric, hydraulic or pneumatic actuation. Metal seated check. Metal seated check. Flangeless wafer type. Seat bonded to the body DN50 to DN1800 DN32 DN600 DN32 DN600 DN PN10 PN250 and ANSI B C to +300 C -10 to +400 C -10 to +400 C -40 to +200 C 13
14 AVK FLOW CONTROL l OIL & GAS PLANTS PIPELINE GAS Double eccentric high Triple eccentric Full bore ball High pressure ball Check 14
15 High High Double eccentric high Triple offset metal to metal seat butterfly valve High pressure ball Wafer and Lugged Versions, Various Body and Disc Materials available Double eccentric design. Available in many high-quality materials. Available as wafer, lugged and double flanged type. Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design. Body types: Wafer, lug and flange type, various body and disc materials available. Soft and metal seated. On/ off and control function. Custom made. Alternative: Ceramic parts Tungsten carbide coating, On/off and control function. Up to DN800 DN50 DN900 Up to DN1200 DN80 DN1400 DN25 DN1400 / DN25 DN250/DN1000 PN10, 16, 25 or Bar (class 150) 50 Bar (class 300) Full vacuum to 25 Bar Max. working pressure 50 bar (up to 100 bar) From 16 to 400 Bar / From 16 to 420 Bar Up to +200 C Up to +425 C -50 to +230 C Up to +700 C -196 C to +550 C Swing check Valve Check Full bore ball Ball valve full bore Body and bonnet in ductile iron. Stem and hinge in stainless steel. Lever and weight or lever and spring. Metal seated check. Body and ball in stainless steel. Seats in PTFE. Manually pneumatically or electrically operated. Floating split body forged. Available as Double block and bleed. Available with trunnion mounted or floating ball design. Designed for any service condition (high temperature, cryogenic, etc.). Various materials on request. DN50 DN600 DN32 DN600 DN15 DN100 DN15 DN200 Up to 63 Bar PN6 PN to +400 C Up to +650 C From -190 C +435 C 15
16 AVK FLOW CONTROL l OIL & GAS PLANTS PIPELINE STORAGE OIL Double eccentric high Triple eccentric Full bore ball High pressure ball Knife gate Check 16
17 High High Double eccentric high Triple offset metal to metal seat butterfly valve High pressure ball Wafer and Lugged Versions, Various Body and Disc Materials available Double eccentric design. Available in many high-quality materials. Available as wafer, lugged and double flanged type. Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design. Body types: Wafer, lug and flange type, various body and disc materials available. Soft and metal seated. On/ off and control function. Custom made. Alternative: Ceramic parts Tungsten carbide coating, On/off and control function. Up to DN800 DN50 DN900 Up to DN1200 DN80 DN1400 DN25 DN1400 / DN25 DN250/DN1000 PN10, 16, 25 or Bar (class 150) 50 Bar (class 300) Full vacuum to 25 Bar Max. working pressure 50 bar (up to 100 bar) From 16 to 400 Bar / From 16 to 420 Bar Up to +200 C Up to +425 C -50 to +230 C Up to +700 C -196 C to +550 C Knife Gate Valve General service knife gate valve TECslide flat plate gate valve TECgate shut-off valve Check Bi-directional high valve specially designed to withstand high pressures. Resilient seated valve, Fully lugged for end of line with a counter flange or fully lugged between flanges. Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.) Shut-off valve with a threepart modular design. The slider plate is moved over a rising spindle. Shut-off valve fully welded design with internal spindle. Due to the use of a back seal for the spindle, the packing seals can be replaced during operation. Metal seated check. DN50 to DN1800 Up to DN1200 DN50 to DN1200 DN80 DN400 DN32 DN600 PN10 PN250 and ANSI B Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200) DN10 DN40 DN16 DN C to +300 C -20 to +250 C Up to +550 C to +400 C 17
18 AVK FLOW CONTROL l OIL & GAS PLANTS LIQUIFIED NATURAL GAS Double eccentric high Centric butterfly with loose or fixed liner Triple eccentric Full bore ball High pressure ball Knife gate Check 18
19 High High Double eccentric high Centric butterfly Rubberlined butterfly Wafer and Lugged Versions, Various Body and Disc Materials available Double eccentric design. Available in many highquality materials. Available as wafer, lugged and double flanged type. Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design. Wide range of materials for disc and loose liner, with ductil iron or carbon steel body in wafer, lug or u-section type, all kind of actuators. Complete range of butterfly in wafer, semi-lug, tapped-lug, u-section, single flange and double flange. Wafer/lug type: Up to DN800 DN50 DN900 Up to DN1200 DN25 DN1600 / DN25 DN600 DN50 DN2200 PN10, 16, 25 or Bar (class 150) 50 Bar (class 300) Full vacuum to 25 Bar / Up to 20 Bar Up to 25 Bar Up to +200 C Up to +425 C -50 to +230 C -50 to +140 C / -40 to +200 C Up to +200 C Triple offset metal to metal seat butterfly valve High pressure ball TECgate shut-off valve Check Full bore ball Ball valve full bore Body types: Wafer, lug and flange type, various body and disc materials available. Soft and metal seated. On/off and control function. Custom made. Alternative: Ceramic parts Tungsten carbide coating, On/off and control function. Shut-off valve fully welded design with internal spindle. Due to the use of a back seal for the spindle, the packing seals can be replaced during operation. Metal seated check. Body and ball in stainless steel. Seats in PTFE. Manually pneumatically or electrically operated. Floating split body forged. Available as Double block and bleed. Available with trunnion mounted or floating ball design. Designed for any service condition (high temperature, cryogenic, etc.). Various materials on request. DN80 DN1400 DN25 DN1400 / DN25 DN250/DN1000 DN80 DN400 DN32 DN600 DN15 DN100 DN15 DN200 Max. working pressure 50 bar (up to 100 bar) From 16 to 400 Bar / From 16 to 420 Bar DN16 DN100 Up to 63 Bar PN6 PN420 Up to +700 C -196 C to +550 C to +400 C Up to +650 C From -190 C +435 C 19
20 AVK FLOW CONTROL l OIL & GAS PLANTS PROCESS WATER Double eccentric high Centric butterfly with loose or fixed liner Full bore ball Gate Strainers Check 20
21 Flanged double eccentric High High Double eccentric high Centric butterfly Strainer Body and disc in ductile iron. Shaft, and pins in Stainless Steel. Fusion bonded epoxy coating acc to GSK. Wafer and Lugged Versions, Various Body and Disc Materials available Double eccentric design. Available in many high-quality materials. Available as wafer, lugged and double flanged type. Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design. Wide range of materials for disc and loose liner, with ductil iron or carbon steel body in wafer, lug or u-section type, all kind of actuators. Body and bonnet in ductile iron. Position of the drain plug enables full drainage without removing the lid. Quick removal of lid for maintenance. Screen of stainless steel in robust one-piece design. Wafer/lug type: DN200 DN2200 Up to DN800 DN50 DN900 Up to DN1200 DN25 DN1600 / DN25 DN600 DN32 DN Bar PN10, 16, 25 or Bar (class 150) 50 Bar (class 300) Full vacuum to 25 Bar / Up to 20 Bar Up to +200 C Up to +425 C -50 to +230 C -50 to +140 C / -40 to +200 C -10 to +400 C Rubberlined butterfly Full bore ball Resilient seated gate valve Swing check valve Check Check valve Complete range of butterfly in wafer, semi-lug, tapped-lug, u-section, single flange and double flange. Body and ball in stainless steel. Seats in PTFE. Manually pneumatically or electrically operated. Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron. Operated by gearbox and hand wheel or actuator. Body and bonnet in ductile iron. Stem and hinge in stainless steel. Lever and weight or lever and spring. metal and soft seated check. Wide range of materials for disc and loose liner, with ductil iron or carbon steel body in wafer, lug or u-section type, all kind of actuators. DN50 DN2200 DN15 DN100 DN40 DN800 DN50 DN600 DN32 DN600 DN Up to 25 Bar Up to 63 Bar Up to +200 C Up to +650 C -10 to +400 C -40 to +200 C 21
22 AVK FLOW CONTROL l OIL & GAS PLANTS INDUSTRIAL WASTE WATER Double eccentric high Centric butterfly with loose or fixed liner Full bore ball Knife gate Strainers Gate Check 22
23 High High Double eccentric high Centric butterfly Rubberlined butterfly Rubberlined butterfly Wafer and Lugged Versions, Various Body and Disc Materials available Double eccentric design. Available in many high-quality materials. Available as wafer, lugged and double flanged type. Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design. Wide range of materials for disc and loose liner, with ductil iron or carbon steel body in wafer, lug or u-section type, all kind of actuators. Complete range of in wafer, semi-lug, tappedlug, u-section, single flange and double flange. Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.) Wafer/lug type: Up to DN800 DN50 DN900 Up to DN1200 DN25 DN1600 / DN25 DN600 DN50 DN2200 Up to DN1200 PN10, 16, 25 or 40 Up to +200 C 20 Bar (class 150) 50 Bar (class 300) Up to +425 C Full vacuum to 25 Bar -50 to +230 C / Up to 20 Bar -50 to +140 C / -40 to +200 C Up to 25 Bar Up to +200 C 10 Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200) -20 to +250 C Full bore ball Resilient seated gate valve Swing check valve Check Strainer Body and ball in stainless steel. Seats in PTFE. Manually pneumatically or electrically operated. Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron. Operated by gearbox and hand wheel or actuator. Body and bonnet in ductile iron. Stem and hinge in stainless steel. Lever and weight or lever and spring. metal and soft seated check. Body and bonnet in ductile iron. Position of the drain plug enables full drainage without removing the lid. Quick removal of lid for maintenance. Screen of stainless steel in robust onepiece design. DN15 DN100 DN40 DN800 DN50 DN600 DN32 DN600 DN32 DN600 Up to 63 Bar Up to +650 C -10 to +400 C -10 to +400 C 23
24 AVK FLOW CONTROL l OIL & GAS PLANTS FIRE PROTECTION Outdoor fire protection Indoor fire Protection Universal street cover Flanged resilient seated gate valve OS&Y Extension spindel for gate, fixed length Wall post indicator Wet Barrel Fire Hydrant to AWWA Universal street cover for AVK telescopic ext. spindle. Can be used as fixed and floating street cover with deflection ability. Body and distance ring of ductile iron, lid of grey cast iron. Body, bonnet, yoke and hand wheel in ductile iron. Stem in copper alloy. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by hand wheel. UL/ FM approved. Key adaptor #23-32, with spindle adaptor fitting to US type wrench nut. AVK wall post indicators are available in three fixed lengths. The handwheel can be locked, and the wall post indicators have a pre-cast threaded boss for mounting a supervisory switch. AVK wet barrel hydrant is designed to be a trouble free, easy to maintain hydrant. Designed so that one person can perform all routine repairs and maintenance. Lid diameter: 131mm Lid inscription: Fire DN65 DN Bar Available in following fixed lengths (in mm): 800 / 1000 / 1250 / 1500, 2000 / 3000 Telescopic lengths (in mm): / , / DN65 DN400 DN150 PN16 24
25 Dry barrel hydrant Dry barrel monitor hydrant Telescopic post indicator Flanged resilient seated post indicator gate valve Flanged resilient seated wrench nut gate valve Body, upper and lower barrel in ductile iron. Wedge in ductile iron vulcanized with AVK EPDM rubber. Stem in stainless steel. Stem rod in epoxy coated steel. Fusion bonded epoxy coating acc. to GSK, with UV resistant polyester top coat. Body, upper and lower barrel, monitor elbow in ductile iron. Wedge in ductile iron vulcanized with AVK EPDM rubber. Stem in stainless steel. Stem rod in epoxy coated steel. Fusion bonded epoxy coating acc. to GSK, with UV resistant polyester top coat. UL/FM approved. Body in ductile iron. Stem in galvanized steel. Fusion bonded epoxy coating acc. to GSK, with UV resistant polyester top coat. Body and bonnet in ductile iron. Stem in stainless steel Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK Operated by Post Indicator. UL/FM approved. Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by stem extension. UL/FM approved. DN150 DN150 DN100-DN400 DN65-DN400 DN50-DN Bar 16.1 Bar 16 Bar 16 Bar Up to +70 C Landing Rubberlined butterfly Grooved end gate valve Flanged resilient seated pin indicator gate valve Flanged concentric butterfly valve Couplings in gunmetal, bronze, brass or light alloy. Complete range of butterfly in wafer, semilug, tapped-lug, u-section, single flange and double flange. With Pin Indicator and handwheel according to AWWA C 606 EPDM rubber wedge Epoxy coated according to DIN and GSK guide lines Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by hand wheel. Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by hand wheel. DN25 DN15 DN50 DN2200 DN50 DN300 DN50 DN400 DN50 DN300 Up to PN16 Up to 25 Bar PN Bar Bar Max 120 C Up to +200 C 0 to 70 C 25
26 AVK FLOW CONTROL l OIL & GAS PLANTS 26
27 AVK FLOW CONTROL SEGMENTS AT AVK FLOW CONTROL, WE FOCUS ON FOUR MAIN TARGET SEGMENTS. IN THIS WAY WE ARE ABLE TO HIGHTEN THE QUALITY OF OUR SOLUTIONS, AND BE CLOSER TO OUR CUSTOMERS AT ALL TIMES. OPTIMAL VALVE SOLUTIONS FOR POWER GENERATION OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS OPTIMAL VALVE SOLUTIONS FOR THE MINING INDUSTRY OPTIMAL VALVE SOLUTIONS FOR WATER TREATMENT 27
28 AVK Flow Control Mikael Baltzer Hansen Key Account Manager Gerner H. Knudsen Sales Manager Karsten B. Larsen Sales Karetmagervej 19D 7100 Vejle Denmark Direct: Mobile: Direct: Mobile: Direct: Mobile: Tel.:
OPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM
FLOW CONTROL OPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM World Valve Wouter Witzel 1 FLOW CONTROL l PRODUCTS CONTENT: FLOW CONTROL 4-5 BUTTERFLY VALVES 6-7 BALL VALVES 8 GATE- AND GLOBE VALVES 9 KNIFE GATE
More informationOPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM
FLOW CONTROL PRODUCT PROGRAM World Valve Wouter Witzel 1 FLOW CONTROL l PRODUCTS CONTENT: FLOW CONTROL 4-5 BUTTERFLY VALVES 6-7 BALL VALVES 8 GATE VALVES 9 ACTUATED VALVES, SWITCH BOXES & ACCESSORIES 10-11
More informationVALVE SOLUTIONS FOR INDUSTRIAL PLANTS
VALVE SOLUTIONS FOR INDUSTRIAL PLANTS WHERE EVER AND WHEN EVER The AVK Group of Manufacturing Companies has for many specific areas in most types of Industrial Plants and are able to offer the products
More informationApproved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationSECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
More information15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationTEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
More informationCLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
More informationHigh quality valves for wastewater treatment
High quality valves for wastewater treatment Your long-term partner AVK INTERNATIONAL A/S Full commitment from your long-term partner AVK has been in the valve business for more than 40 years. First AVK
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationHattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationConcentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
More informationAVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING
AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING SERVICE MEMBER OF THE GROUP GATE VALVE RESILIENT SEATED FULLY VULCANIZED WEDGE Product series: S02, S21, S06, S15, S55 Rising stem/non rising
More informationO IL & G AS INDUSTRIAL VALVES, ACTUATORS & ACCESORIES
O IL & G AS O IL & G AS License Number 6D-1724 FORGED STEEL Size Range Ball Valves API 6D / BS EN ISO 17292 Gate Valves Globe Valves API 602 / BS EN ISO 15761 Class 150-2500 / Class 800 ½ - 2 Check Valves
More informationCV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
More informationBrown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
More informationP R O D U C T R A N G E
PRODUCT RANGE OVERVIEW Range of Materials AUSTRALIAN PIPELINE VALVE BRAND Australian Pipeline Valve (APV) manufactures a complete Cast iron, Ductile iron (GGG40) range of ASME, API, BS and AS valves such
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationBS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
More informationAVK UK GROSS PRICE LIST 2017
AVK UK GROSS PRICE LIST 2017 AVK UK GROSS PRICE LIST 2017 AVK UK PRICE LIST 2017 AVK UK is part of the globally renowned AVK Group, one of the leading manufacturers of valves for the water, gas and waste
More informationGas. VAG EKO plus Gate Valve resilient-seated - short face-to-face length PN 10/16 - DN KAT-A 1032-F4-G
Gas VAG EKO plus Gate Valve resilient-seated - short face-to-face length Product characteristics and benefits Resilient seated in accordance with EN 1377 (IN 3352 - A) Face-to-face length acc. to EN 55-1,
More informationValves Range RVRX - Resilient Seated Gate Valve PN16 Flange
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange No Component Material 1 Body Ductile iron GGG40 2 Wedge DI Fully Vulcanised EPDM 3 Wedge Nut Brass 4 Stem SS420 5 Bolt Q235+Zinc 6 Gasket EPDM
More informationWafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
More informationWATER AND WASTE WATER SOLUTIONS
AVK WATER AND WASTE WATER SOLUTIONS WATER AND WASTE WATER SOLUTIONS AVK VALVES AND FITTINGS FOR WATER, WASTE WATER AND FIRE SUPPLY AVK Syddal, Hyde, Cheshire AVK UK National Distribution Centre, Corby,
More informationStandard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections
Standard-Low Emission Valves to 100 PPM Cast Steel Valves 150 2500 ASME; Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End Connections;
More informationBI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional
More informationRESILIENT SEATED GATE VALVE FAF 6200
PRODUCTION STANDARTS DN40 DN800 PN 10-16 Design EN 1171 / EN 1074 Connection Face to Face EN 1092-2 / ISO 7005-2 - Flanged EN 558 Series 15 / DIN 3202 F5 Marking EN 19 Tests EN 12266-1 Corrosion Protection
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
More informationQUALITY YOU CAN RELY ON AS CUSTOMERS RELY ON YOURS
AVK WASTEWATER TREATMENT QUALITY YOU CAN RELY ON AS CUSTOMERS RELY ON YOURS LET S ENGINEER PREMIUM SOLUTIONS THAT LAST AVK s solutions for wastewater treatment withstand even the toughest conditions and
More informationTriple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
More informationND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
More informationAVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)
AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO
More informationQuality, Safety and Environment
Quality, Safety and Environment Global Valve Center B.V. is an independent, internationally operating, modern, flexible and service-oriented organization with over forty years of experience and expertise
More informationWAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationBUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationAVK product programme. Expect A taste of AVK
AVK product programme Expect A taste of AVK AVK - your long-term partner AVK has been in the valve business for more than 40 years. Today AVK is a global leader within valves, hydrants, fittings and accessories
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationAVK WATER SUPPLY WE DELIVER PURE QUALITY JUST LIKE YOU
AVK WATER SUPPLY WE DELIVER PURE QUALITY JUST LIKE YOU A COMPLETE RANGE OF VALVES, HYDRANTS AND ACCESSORIES AVK has been in the valve business for more than 40 years. Today, we are offering solutions for
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More informationBI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
More informationSeries 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
More informationISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
More informationLead-free valves for potable water systems. Rev 02/17
Lead-free valves for potable water systems. Rev 02/17 UltraPure for purer water. The new standard. Senate law S.3874 was passed January 4, 2011 and is effective January 4, 2014. The law regulates lead
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationValves. Fittings. Actuators
Valves Fittings Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; CE Registered Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged,
More informationTechnical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationTechnical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page
Page 230523-1 Copyright 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant
More informationSwing Check Valves - Series 41
Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationSealing Test Pressure (MPa)
TRIPLE ECCENTRIC BUTTERFLY VALVE Triple Eccentric Butterfly Valve provides a tight shut-off. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without
More informationValves. BS Standard JINAN MEIDE CASTING CO., LTD.
Valves BS Standard JINAN MEIDE CASTING CO., LTD. Resilient Wedge Gate Valve XZ81X Grooved Resilient OS&Y Gate Valve Page 11 XZ51X Flanged x Grooved Resilient OS&Y Gate Valve Page 12 Z85X Grooved Resilient
More informationNon Return Valves.
Non Return Valves Table of contents Product information Type 4010 & 4010HD Type 4010, with lever and weight Type 4010 HD, with lever and weight + hydraulic damper Type 4020, slanted seat with/without damper
More informationVALVES 5
info@ayvaz.com www.ayvaz.com GLOBE VALVES GV-16, GV-25, GV-40 GV-16 GV-25 GV-40 GG-25 Cast Iron GSC-25 Cast Steel GSC-25 Cast Steel Seat Stainless Steel AISI 304 Stainless Steel AISI 304 Stainless Steel
More informationAVK (WWE) BUTTERFLY VALVE DN (2" to 56") 75 (EVS)
AVK (WWE) BUTTERFLY VALVE DN 50 1400 (2" to 56") 75 (EVS) Wafer type Face to face dimension to ISO 5752 short, basic series 20 (BS 5155 wafer short, DIN 3202K1) Flange connection to ISO 70052 (BS EN 10922,
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More informationAVK FIRE PROTECTION FIRE DOESN T COMPROMISE NEITHER SHOULD YOU
AVK FIRE PROTECTION FIRE DOESN T COMPROMISE NEITHER SHOULD YOU LET S MAKE A DIFFERENCE WHEN EVERY SECOND COUNTS Firemen depend fully on valves and hydrants that function perfectly, since they are installed
More informationWAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
More informationAVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
More informationNON RETURN BRASS FLANGED AGA GAS APPROVED
NON RETURN BRASS FLANGED AGA GAS APPROVED ACTUATED MARINE STAINLESS STEEL 34 VALVES 36... BRASS BALL VALVES 37... AGA GAS APPROVED VALVES GATE VALVES 38... BRASS VALVES 39... RUBBER BELLOW, HOSECOCKS &
More informationHAWLE-specification water
water GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN HAWLE - Epoxy Powder-Coating High quality corrosion
More informationHEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10
HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the
More informationValve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
More informationseries BUTTERFLY VALVE DOUBLE ECCENTRIC FLANGED FAF 3800 PRODUCTION STANDARDS DN100 DN2000 PN Design EN 593 EN ISO Flanged
PRODUCTION STANDARDS DN100 DN2000 PN 10-16-25 Design EN 593 Connection End Connection EN 1092-2 ISO 7005-2 - Flanged EN 558 Series 14 DIN 3202 F4 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More informationDUTCH VALVE COMPANY SINCE
DUTCH VALVE COMPANY SINCE 1956 1 Contents Company Introduction Manufacturing Capacity Product Range Certificates & Approval Bonded Vs Replaceable Liner Area of Applications Our Strength Project Reference
More informationGATE/GLOBE/CHECK VALVE, BALL VALVES, BUTTERFLY VALVES, KNIFE GATE VALVES, CONTROL VALVES and ACTUATION
GATE/GLOBE/CHECK VALVE, BALL VALVES, BUTTERFLY VALVES, KNIFE GATE VALVES, CONTROL VALVES and ACTUATION CARBON STEEL,, HASTELLOY, CARPETER 20 MONEL, PVC, CAST IRON, DUCTILE IRON, TITANIUM, DUPLEX 3 PC FOUR
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
More informationStainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
More informationBritish Standard institute-bs Valve Standards
BS 341-1:1991 Transportable gas container valves. Specification for industrial valves for working pressures up to and including 300 bar (REPLACED by BS EN 14189:2003), BS 341-3:2002), BS EN 849:1997),
More informationPRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
More informationAUMA. Boehmer. Conval. Conval. Dragon
ARI Air Release Valves High air discharge air release valve Patented conical body design Threaded and flanged ends Combination air/vacuum Kinetic/automatic air release 1 to 8 AUMA Electric Actuators and
More informationVALVES. A. Section HVAC Basic Materials and Methods. E. Section Building Automation and Control System Guidelines
230523 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230500 HVAC Basic Materials and Methods B. Section 230510 Chilled Water System C. Section 230520 Heat Generation D. Section 238216 Coils E.
More informationSECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
More informationAVK southern africa water supply. your water solutions provider
AVK southern africa water supply your water solutions provider who we are The AVK Group is a privately owned group that comprises of more than 80 companies across the world with headquarters based in
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationBALL VALVES BUTTERFLY VALVES GLOBE VALVES GATE VALVES CHECK VALVES KNIFE VALVES Y STRAINERS ACTUATION BALL VALVES SS2020N-300 2 PIECE FLANGED ANSI 300 BALL VALVE Firesafe Certified Full Bore TMF1600 seats
More informationProduct data sheet Wouter Witzel - EVFSGD Valves Rubber Lined - Centric EVFS PDS H
DESIGN Body Double Flanged type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series 13
More informationDOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationCopyright 2012 AIA MasterSpec Premium 06/12 PRODUCT MASTERSPEC LICENSED BY ARCOM TO CONBRACO, INC.
This Product MasterSpec Section is licensed by ARCOM to Apollo Flow Controls, Conbraco Industries, Inc ("Licensee").This Product MasterSpec Section modifies the original MasterSpec text and does not include
More informationButterfly valves. Introduction. Made of ductile cast iron
Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international
More informationTHROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
More informationHEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationEXPECT TOP QUALITY VALVES AND HYDRANTS
AVK FIRE PROTECTION EXPECT TOP QUALITY VALVES AND HYDRANTS WHEN EVERY SECOND COUNTS COUNT ON AVK VALVES AND HYDRANTS INTERNATIONAL SAFETY APPROVALS INCLUDED Safety comes first don t compromise on quality.
More informationTrunnion Ball Valve Catalogue
Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of
More informationGATE VALVES S 38 APPLICATION
APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids,
More informationMILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
More informationC OMPANY INSIGHTS B ALL L V VALVES. Series E1500. Series E3100. Series E3200 Excaliber. Series E9100. Series E9200. Our Vision.
B ALL L V VALVES Series E1500 Size 1/4 to 3 316 Stainless steel body & ball Full port Body rating 1000 WOG RPTFE seats standard (other avaliable) Teflon packing Safety Locking Leaver Series E3200 Excaliber
More informationSee our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
More information