2019 Price List. Thrust-Resistant Joints Pressure Pipe Fittings for Plastic Pipelines Pipe Fittings for Sewage Pipelines Socket Connections

Transcription

1 FITTINGS AND VALVES 2019 Price List Gate Valves Service Connection Valves Hydrants Butterfly Valves Back Flow Preventers, Ventilation Valves Control Valves Novo Plug-in System Accessories Pressure Pipe Fittings Flanged Pipes Thrust-Resistant Joints Pressure Pipe Fittings for Plastic Pipelines Pipe Fittings for Sewage Pipelines Socket Connections

2 Notes With this price-list all previous price-lists are superseded. Our delivery programme of fittings, flanged pipes and valves DN 40 up to 1600 is contained in our catalogue Fittings, flanged pipes and valves made of ductile cast iron with the corresponding specifications. Please also observe our laying and operating instructions on the internet. Pricing The listed prices are valid in Euro plus VAT where applicable (recommended retail price) Delivery is ex works, excluding packing. For orders below 250 we will invoice a surcharge of 25 for small quantities. This price-list contains only a part of our range of products. For fittings and valves not contained herein we would ask you to send us inquiries. Custom-made items are generally excluded from cancellation and return of goods. For the rest, the General Terms and Conditions are applied. Compliance Marks and Membership Our products bear the DVGW compliance mark. In general we manufacture as per EN 545/ISO 2531 series A, as per DIN or factory standard. Fittings and sockets for PVC pipes are manufactured as per EN or factory standard We are a member of the European Association for Ductile Iron Pipe Systems EADIPS (Fachgemeinschaft Guss-Rohrsysteme FGR e.v.). We are a member of the German GSK Quality Association for Heavy Duty Corrosion Protection of Powder Coated Valves and Fittings (GSK Gütegemeinschaft Schwerer Korrosionsschutz) and are entitled to apply the corresponding seal to our products All enamelled valves and fittings are refined in accordance with the guidelines of the German Enamellers Association DEV (Deutscher verband e.v.) REACH Declaration The European chemicals regulation (EC) No. 1907/2006 (REACH) says that chemical substances may only be made available on the market within the area of validity if they were registered beforehand. This is valid from a volume of 1 ton/year. For those chemical substances that are used during manufacture, Düker, as a so-called downstream user, has contacted the suppliers of the substances concerned by REACH in order to ensure the registration and evaluation of those substances. In case of a noteworthy content of SVHC substances (substances of very high concern) in a product, article 33 of the REACH regulation says that suppliers are obliged to transmit corresponding information to the client. The required information regarding our products can be found on our website at Safety Data Sheets For all paints and coatings that Düker delivers for use on site, Düker makes the safety data sheets available on the web page CE Marking as per Construction Products Regulation (CPR) Pillar and underground hydrants as well as pressure pipe fittings for gas and sewage are manufactured in correspondence with a harmonised EN standard following the Construction Products Regulation CPR. They bear a CE marking, which is based on a so-called Declaration of Performance (DOP). For the latest version of the Düker Declarations of Performance (DOP) please visit Operating Manuals The latest operating manuals for valves can be found on Operating manuals Düker fittings and valves

3 Gate Valves 1 Service Connection Valves 2 Hydrants 4 Butterfly Valves 5 Back Flow Preventers / Ventilation Valves 6 Control Valves 7 Novo Plug-in System 8 Accessories 9 Pressure Pipe Fittings 10 Pressure Pipe Fittings for Plastic Pipelines 11 Pipe Fittings for Sewage Pipelines 12 Socket Connections 3 13

4 Contents 1. Resilient-Seated Gate Valves 1.1 Type 4004 with flanges enamel Type 2004 with flanges enamel Type 4004 with flanges epoxy Type 2004 with flanges epoxy Gate valves in large diameters with flanges epoxy Type 4004 with PE studs for welding enamel Type 4004 repair valve enamel Type 2004 repair valve enamel Type 4004 with flanges epoxy yellow Type 2004 with flanges epoxy yellow Type 4004 with PE studs for welding epoxy yellow Type 3004 with studs for welding Type 4004 with PE studs for welding epoxy yellow blow-off version Type 3004 with steel studs for welding blow-off version Type 3004 with PE studs for welding blow-off version Type 4004 with flanges enamel sewage Type 2004 with flanges enamel sewage Type 4004 with flanges epoxy sewage Type 2004 with flanges epoxy sewage 30 4 Düker fittings and valves

5 2. Service Connection Valves 2.1 TOP-Fix type 1014 with internal thread TOP-Drehfix type 1014 PE TOP-Drehfix type 1014 PushFit Clapping band for TOP type Tapping valve TOP and TOPsi type Tapping clamp Clapping band for TOP and TOPsi Type 1004 with internal thread enamel Type 1004 with internal thread enamel Type 1004 with PE studs for welding enamel Type 1004 with PE studs for welding epoxy yellow Hydrants 4.1 Underground hydrant type Underground hydrant type Manhole hydrant type Pillar hydrant type Pillar hydrant type Hydrant accessories Hydrant spare parts 48 Düker fittings and valves 5

6 5. Butterfly Valves 5.1 Type 4510 with flanges Type 451 with flanges Type 4510 with flanges long face-to-face length with/without bypass Ring butterfly valve type Back Flow Preventers / Ventilation Valves 6.1 Non-slam check valve type Non-return valve type Air Valves Control Valves General information Plunger valves type RKV Novo Plug-In System 8.1 Gate valve type 4004 Novo enamel Gate valve type 4004 Novo/spigot end enamel Underground hydrant type 304 S Butterfly valve type 4510 Novo Pipe section with Novo socket M Double socket duckfoot bend with Novo socket MMN/MMNR Single socket tee with spigot and socket branch B Spigot tee with Novo socket MI 68 6 Düker fittings and valves

7 8.2 All spigot tee IT Spigot pipe section S Novo collar U Flanged socket duckfoot bend EN Flanged socket EU Single socket bend MK Double socket tee with flanged branch MMA All socket tee MMB Double socket bend MMK Double socket bend 90 MMQ Double socket taper MMR Single socket bend 90 MQ NOVO-SIT thrust-resistant joint NOVO-Grip III thrust-resistant joint NOVO-Grip PVC thrust-resistant joint NOVO-Grip stabilising bush PE adapter for Novo sockets Laying tool Dismantling equipment 83 Düker fittings and valves 7

8 9. Accessories 9.1 Flap valve Hand wheel Operating key Telescope stem extension set for butterfly valves 87 Definition pipe covering for butterfly valves Quick telescope extension set GW telescope extension set Adapter and coupling set Stem extension sets for gate valves from DN Definition pipe covering GW Dismantling joints Pressure Pipe Fittings 10.1 Pressure pipe fittings epoxy-coated Pressure pipe fittings epoxy-coated from DN Pressure pipe fittings enamel Pressure pipe fittings enamel from DN Pressure pipe fittings enamel Pressure pipe fittings enamel from DN 400 Single socket tee with spigot and flanged branch A 94 Single socket tee with spigot and socket branch B 94 8 Düker fittings and valves

9 Flanged socket E 94 Flanged socket duckfoot bend EN 94 Flanged socket bend 90 EQ 95 Flanged socket EU Flanged spigot F 96 Double flanged pipes FF Surcharges puddle flanges 103 Flanged bend FFK Double flanged taper concentric FFR Double flanged taper excentric FFRe 108 Single socket bend MK Double socket tee with flanged branch MMA All socket tee MMB Double socket bend MMK Double socket bend 90 MMQ 118 Double socket taper MMR Single socket bend 90 MQ 119 Flanged duckfoot bend N 120 Plug P 120 Screw plug with threaded hole PX 120 Double flanged bend 90 Q 121 Düker fittings and valves 9

10 All flanged tee T All flanged cross tee TT 124 Collar U 125 Blank flange X 125 Surcharge threaded holes 126 Transition flange 126 Flanged bellmouth Pressure Pipe Fittings for Plastic Pipelines 11.1 Flanged socket E-KS Flanged socket duckfoot bend EN-KS Flanged spigot F-KS Double socket tee with flanged branch MMA-KS All socket tee MMB-KS Double socket with internal threaded branch MMI-KS Double socket taper MMR-KS Pipe Fittings for Sewage Pipelines 12.1 Drilling saddle piece with socket SM Drilling saddle piece with socket SM Drilling saddle piece with spigot end SI 90 (GGG spigot end) Drilling saddle piece with spigot end SI 90 (clay pipe spigot end) Düker fittings and valves

11 12.1 Drilling saddle piece with spigot end SI TYTON coupling MM Spigot end branch 67 ICI Double socket piece with spigot branch MMI Double socket piece with spigot branch MMI Double socket piece with socket branch MMM Pipe sealing cap RVD Manhole connection piece SA Hatchbox Double socket piece with 45 socket branch MMC Socket Connections 13.1 SMU thrust-resistant joint Spezial thrust-resistant joint Sealing ring screw-gland socket joint EPDM/NBR Gliding ring standard for screw-gland socket joint Screw ring TYTON SIT PLUS thrust-resistant joint TYTON sealing ring EPDM/NBR 137 General terms and conditions of delivery and payment 138 Düker fittings and valves 11

12 Düker Gate Valve Type 4004 PN 10/16, EN 1074 part 1+2, GW Face-to-face dimension EN 558 basic series 15 Düker enamel finish for water Resilient-seated gate valve, flanges according to EN , inside and outside enamel according to the DEV-guidelines for class III soils, EN ISO 11177, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts according to DVGW W 270, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem X20 Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines. Surface protection inside and outside Düker enamel as per EN ISO 11177, DEV guidelines, for soil class III Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat , DN PN Price in * , , , , ** , , , , , , , , , ,00 Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator upon request * without operating element ** 4 holes as per DIN Product group 1.1 Gate valves for water with flanges enamel

13 1. Gate Valves Düker Gate Valve Type 2004 PN 10/16, EN 1074 part 1+2, GW Face-to-face dimension EN 558 basic series 14 Düker enamel finish for water Resilient-seated gate valve, flanges according to EN , inside and outside enamel according to the DEV-guidelines for class III soils, EN ISO 11177, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts according to DVGW W 270, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem X20 Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer EPDM) Surface protection inside and outside Düker enamel according to EN ISO 11177, DEV guideline class III soils Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat , DN PN Price in * , , , , , , , , , , , , ,00 * without operating element Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator upon request Product group 1.1 Gate valves for water with flanges enamel 13

14 Düker Gate Valve Type 4004 PN 10/16, EN 1074 part 1+2, GW Face-to-face dimension EN 558 basic series 15 Düker epoxy finish for water Resilient-seated gate valve, flanges according to EN , inside and outside epoxy blue RAL 5005 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts according to DVGW W 270, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem X20 Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection inside and outside epoxy blue RAL 5005 according to the GSK guidelines Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat , DN PN Price in * , , , , ** , , , , , , , , , ,00 * without operating element ** 4 holes as per DIN 1882 Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator upon request 14 Product group 1.2 Gate valves for water with flanges epoxy coating

15 1. Gate Valves Düker Gate Valve Type 2004 PN 10/16, EN 1074 part 1+2, GW Face-to-face dimension EN 558 basic series 14 Düker epoxy finish for water Resilient-seated gate valve, flanges according to EN , inside and outside epoxy blue RAL 5005 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts according to DVGW W 270, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem X20 Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection inside and outside epoxy blue RAL 5005 according to the GSK guidelines Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat , DN PN Price in * , , , , , , , , , , , , ,00 * without operating element Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator upon request Product group 1.2 Gate valves for water with flanges epoxy coating 15

16 Gate Valve in Large Diameters PN 10/16, EN 1074 part 1+2, GW Face-to-face dimension EN 558 basic series 14 / 15 finish for water Resilient-seated gate valve, flanges according to EN , inside and outside epoxy blue RAL 5005 according to GSK, connecting screws A2, countersunk and sealed, rubberised wedge, EPDM gaskets according to DVGW W 270, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1030) Stem X20Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanised (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines. Surface Protection inside and outside epoxy blue RAL 5005 according to the GSK guidelines Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat , Gate valve face-to-face length basic series 14 Gate valve face-to-face length basic series 15 DN PN Price in * , , , , , , , ,00 * without operating element DN PN Price in * , , , , , ,00 Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 91) Electrical actuator upon request 16 Product group 1.2 Gate valves for water with flanges epoxy coating

17 1. Gate Valves Düker Gate Valve Type 4004 PN 10/16, EN 1074 part 1+2, GW with studs for welding on both sides PE 100 Face-to-face dimension EN 558 basic series 13 Düker enamel finish for water Resilient-seated gate valve with PE-HD connections according to DVGW G with connecting dimensions according to DIN 8074/8075, inside and outside enamel according to the DEV-guidelines for class III soils, EN ISO 11177, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media free stem bearing, rubberized wedge, EPDM gaskets and plastic parts according to DVGW W 270, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem X20 Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection inside and outside Düker enamel according to EN ISO 11177, DEV guideline class III soils Field of application: Drinking water up to +40 C Pipes DIN 8074, inspection report Engler-Bunte-Institute regarding connection technology on the basis of DVGW-VP-600, melting index group MFI 005 and 010, according to the guidelines of the DVGW publication G 477 and bulletin DVS 2207 diameter DN pressure PN SDR Test pressure in bar (water) Body Seat ,6 Upon request: inside and outside Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) SDR 11 DN d Wall thickness Price in * ,2 538, , ,4 736, , , , , , , , , , ,00 SDR 17 DN d Wall thickness Price in * ,4 538, ,6 614, ,4 736, , , , , , , , , , ,00 * without operating element Product group 1.3 Gate valves for water with PE-studs for welding 17

18 Düker Replacement and Repair Valve Type 4004 thrust-resistant PN 10/16, EN 1074 part 1+2, GW Face-to-face dimension EN 558 basic series 15; Düker enamel finish for water Resilient-seated gate valve, flanges according to EN , enamel inside and outside according to the DEV guideline for class III soil, EN ISO 11177, restraint loose flanges with integrated gasket securing tensile strength, epoxy coating black RAL 9005 according to the GSK guidelines, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts in accordance with DVGW W 270, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem X20Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection Body / bonnet Düker enamel inside and outside according to EN ISO 11177, DEV guideline class III soils Loose flanges: epoxy black RAL 9005 inside and outside according to the GSK guidelines Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,0 17, ,0 11,0 Replacement and repair valve type 4004 DN PN FTF* Price in ** , , , , , ,00 Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) * + 8 mm max. ** without operating element 18 Product group 1.4 Replacement and repair valves

19 1. Gate Valves Düker Replacement and Repair Valve Type 2004 thrust-resistant PN 10/16, EN 1074 part 1+2, GW Face-to-face length EN 558 basic series 14 Düker enamel finish for water Resilient-seated gate valve, flanges according to EN , enamel inside and outside according to the DEV guideline for class III soil, EN ISO 11177, restraint loose flanges with integrated gasket securing tensile strength, epoxy coating black RAL 9005 according to the GSK guidelines, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts in accordance with DVGW W 270, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem X20Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection Body / bonnet Düker enamel inside and outside according to EN ISO 11177, DEV guideline class III soils Loose flanges: epoxy black RAL 9005 inside and outside according to the GSK guidelines Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,0 17, ,0 11,0 Replacement and repair valve type 2004 DN PN FTF* Price in ** , , , , , ,00 Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) * + 8 mm max. ** without operating element Product group 1.4 Replacement and repair valves 19

20 Düker Gate Valve Type 4004 PN 0.5/16, EN 13774, GW Face-to-face dimension EN 558 basic series 15 Düker epoxy finish for gas Resilient-seated gate valve, flanges according to EN , inside and outside epoxy yellow RAL 1023 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge and gaskets NBR, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem X20Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer NBR) Surface protection inside and outside epoxy yellow RAL 1023 according to the GSK guidelines Field of application: All gases according to DVGW publication G 260/I diameter DN pressure PN Test pressure in bar Body Water Seat PG 3 16 bar Air ,5 / ,5 and 17,6 Upon request: inside and outside enamel with pressure test PG 2 Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator upon request DN PN PG Price in * PG 3 321, PG 3 341, PG 3 420, PG 3 400, PG 3 444, PG 3 658, PG 3 658, PG , PG , PG , PG , PG , PG ,00 * without operating element The prices for the gas valves include the inspection certificate 3.1 according to EN and valve marking. 20 Product group 1.5 Gate valves for gas with flanges

21 1. Gate Valves Düker Gate Valve Type 2004 PN 0,5 / 16, EN 13774, GW Face-to-face dimension EN 558 basic series 14 Düker epoxy finish for gas Resilient-seated gate valve, flanges according to EN , inside and outside epoxy yellow RAL 1023 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge and gaskets NBR, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem X20Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer NBR) Surface protection inside and outside epoxy yellow RAL 1023 according to the GSK guidelines Field of application: All gases according to DVGW publication G 260/I diameter DN pressure PN Test pressure in bar Body Water Seat PG 3 16 bar Air ,5 / ,5 and 17,6 Upon request: inside and outside enamel with pressure test PG 2 Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator upon request DN PN PG Price in * PG 3 313, PG 3 337, PG 3 407, PG 3 386, PG 3 427, PG 3 635, PG 3 635, PG 3 993, PG , PG , PG , PG , PG ,00 * without operating element The prices for the gas valves include the inspection certificate 3.1 according to EN and valve marking. Product group 1.5 Gate valves for gas with flanges 21

22 Düker Gate Valve Type 4004 PN 5, EN 13774, GW with studs for welding on both sides PE 100 Face-to-face dimension EN 558 basic series 13 Düker epoxy finish for gas Resilient-seated gate valve with PE-HD connections according to DVGW G with connecting dimensions according to DIN 8074/8075, epoxy yellow RAL 1023 inside and outside according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, media free stem bearing, rubberized wedge, gaskets NBR, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem X20Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer NBR) Surface protection inside and outside epoxy yellow RAL 1023 according to the GSK guidelines Field of application: All gases according to DVGW publication G 260/I Pipes DIN 8074, inspection report Engler-Bunte-Institute regarding connection technology on the basis of DVGW-VP-600, melting index group MFI 005 and 010, according to the guidelines of the DVGW publication G 477 and bulletin DVS 2207 diameter DN pressure PN SDR Test pressure in bar Body Water Seat PG 3 5 bar / ,5 and ,5 and 11 Air Upon request: inside and outside enamel Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) SDR 11 PN 5 PN 10 DN d Wall thickness Price in * ,2 616, , ,4 813, , , , , , , , , , ,00 SDR 17 PN 5 DN d Wall thickness Price in * ,4 616, ,6 678, ,4 813, , , , , , , , , , ,00 * without operating element The prices for the gas valves include the inspection certificate 3.1 according to EN and valve marking. 22 Product group 1.6 Gate valves for gas with PE-studs for welding

23 1. Gate Valves Düker Gate Valve Type 3004 PN 16, EN 13774, GW with studs for welding on both ends according to EN for steel pipes Face-to-face dimension EN basic series 15 Polyurethane finish for gas Resilient-seated gate valve with studs for welding according to EN 12627, inside Düker enamel, outside Polyurethane, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, gaskets NBR, DVGW tested and registered. Material Body EN-GJS (JS 1049) Studs for welding St / P235GH Bonnet, obturator EN-GJS (JS -1050) Stem X20Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer NBR) Surface protection inside blue Düker enamel Outside polyurethane according to DIN T 2, 15 KV-tested Field of application: All gases according to DVGW publication G 260/I diameter DN pressure PN Test pressure in bar Body Water Seat PG 3 16 bar ,5 and 17,6 Air DN PN Outside pipe diameter mm Price in * , , , , , , , , , , , , , ,00 Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) * without operating element The prices for the gas valves include the inspection certificate 3.1 according to EN and valve marking. Product group 1.7 Gate valves type

24 Düker Gate Valve Type 4004 PN 5, EN 13774, GW with blow-off pipes and studs for welding on both sides PE 100 Face-to-face dimension EN 558 basic series 13 Düker epoxy finish for gas Resilient-seated gate valve with PE-HD connections according to DVGW G with connection dimensions according to DIN 8074/8075, epoxy yellow RAL 1023 inside and outside according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, gaskets NBR, DVGW tested and registered. Werkstoffe Body EN-GJS (JS 1049) Bonnet and wegde EN-GJS (JS 1050) Stem X30Cr13 Stem nut and clamping piece - special brass Obturator - entirely vulcanized (elastomer - NBR) Surface protection inside and outside epoxy yellow RAL 1023 according to the GSK guidelines Field of application: All gases according to DVGW publication G 260/I Pipes DIN 8074, inspection report Engler-Bunte-Institute regarding connection technology on the basis of DVGW-VP-600, melting index group MFI 005 and 010, according to the guidelines of the DVGW publication G 477 and bulletin DVS 2207 diameter DN pressure PN SDR Test pressure in bar Body Water Seat PG 3 5 bar / ,5 and 6 Air Operation: Operating key (see page 86) Stem extension set (see page 90) SDR 11 DN d Wall thickness Price in * , , , , , , , , , , , , , , ,00 SDR 17 DN d Wall thickness Price in * , , , , , , , , , , , , , , , ,00 * without operating element The prices for gas valves include the inspection certificate 3.1 according to EN and the valve marking. 24 Product group 1.8 Gate valves for gas with blow-off pipes

25 1. Gate Valves Düker Gate Valve Type 3004 PN 5, EN with blow-off pipes and studs for welding on both ends according to EN for steel pipes Polyurethane finish for gas Resilient-seated gate valve with studs for welding according to EN 12627, inside Düker enamel, outside polyurethane, connecting screws A2, countersunk and sealed, media free stem bearing, rubberized wedge, gaskets NBR, DVGW tested and registered. The welding seams are tested according to the AD bulletin HP5 / 3 and the weld-on ends according to EN Material Body EN-GJS (JS 1049) Studs for welding St / P235GH Bonnet, obturator EN-GJS (JS -1050) Stem X20Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer NBR) Surface protection inside blue Düker enamel Outside polyurethane according to DIN , 15 KV-tested Field of application: All gases according to DVGW publication G 260/I diameter DN pressure PN Test pressure in bar Body Water Seat PG 3 5 bar ,5 and 6 Air DN Outside pipe diameter mm PG Price in * ,9 PG3 upon request ,3 PG3 upon request ,3 PG3 upon request ,1 PG3 upon request ,9 PG3 upon request Operation: Operating key (see page 86) Stem extension set (see page 90) * without operating element The prices for the gas valves include the inspection certificate 3.1 according to EN and valve marking. Product group 1.8 Gate valves for gas with blow-off pipes 25

26 Düker Gate Valve Type 3004 PN 5, EN with blow-off pipes and studs for welding on both ends PE 100 Polyurethane finish for gas Resilient-seated gate valve with PE-HD connections according to DVGW G with connecting dimensions according to DIN 8074/8075, Düker enamel on the inside, polyurethane on the outside, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, gaskets NBR, DVGW tested and registered. PE pipe end with double socket welding length. The welding seams are tested according to the AD bulletin HP5 / 3 and the weld-on ends according to EN Material Body EN-GJS (JS 1049) PE 100 stud for welding Bonnet, obturator EN-GJS (JS-1050) Stem X20Cr13 stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer NBR) Surface protection inside blue Düker enamel Outside polyurethane according to DIN KV-tested Field of application: All gases according to DVGW publication G 260/I diameter DN pressure PN SDR Test pressure in bar Body Water Seat PG 3 5 bar / ,5 and 6 Air DN Diameter PG Price in * PG3 upon request PG3 upon request PG3 upon request PG3 upon request Operation: Operating key (see page 86) Stem extension set (see page 90) * without operating element The prices for the gas valves include the inspection certificate 3.1 according to EN and valve marking. 26 Product group 1.8 Gate valves for gas with blow-off pipes

27 1. Gate Valves Düker Waste Water Valve Type 4004 PN 10/16, GW Face-to-face dimension EN 558 basic series 15 Düker enamel finish Resilient-seated gate valve, flanges according to EN , enamel inside and outside according to the DEV guideline for class III soil, EN ISO 11177, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, gaskets NBR. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem Stem nut and clamping piece aluminum bronze Obturator entirely vulcanized (elastomer NBR) Surface protection inside and outside Düker enamel according to EN ISO 11177, DEV guideline class III soils Field of application: Waste water diameter DN pressure PN Test pressure in bar (water) Body Seat , DN PN Price in * , , , , , , , , , , ,00 * without operating element Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator upon request Product group 1.9 Gate valves for sewage 27

28 Düker Waste Water Valve Type 2004 PN 10/16, GW Face-to-face dimension EN 558 basic series 14 Düker enamel finish Resilient-seated gate valve, flanges according to EN , enamel inside and outside according to the DEV guideline for class III soil, EN ISO 11177, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, gaskets NBR. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem Stem nut and clamping piece aluminum bronze Obturator entirely vulcanized (elastomer NBR) Surface protection inside and outside Düker enamel according to EN ISO 11177, DEV guideline class III soils Field of application: Waste water diameter DN pressure PN Test pressure in bar (water) Body Seat , DN PN Price in * , , , , , , , , , , ,00 * without operating element Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator upon request 28 Product group 1.9 Gate valves for sewage

29 1. Gate Valves Düker Waste Water Valve Type 4004 PN 10/16, GW Face-to-face dimension EN 558 basic series 15 Düker epoxy blue finish Resilient-seated gate valve, flanges according to EN , inside and outside epoxy blue RAL 5005 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, gaskets NBR. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem Stem nut and clamping piece aluminum bronze Obturator entirely vulcanized (elastomer NBR) Surface protection inside and outside epoxy blue RAL 5005 according to the GSK guidelines Field of application: Waste water diameter DN pressure PN Test pressure in bar (water) Body Seat , DN PN Price in * , , , , , , , , , , ,00 * without operating element Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator upon request Product group 1.9 Gate valves for sewage 29

30 Düker Waste Water Valve Type 2004 PN 10/16, GW Face-to-face dimension EN 558 basic series 14 Düker epoxy blue finish Resilient-seated gate valve, flanges according to EN , inside and outside epoxy blue RAL 5005 according to GSK, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, gaskets NBR. Material Body and wedge EN-GJS (JS 1050) Stem Stem nut and clamping piece aluminum bronze Obturator entirely vulcanized (elastomer NBR) Surface protection inside and outside epoxy blue RAL 5005 according to the GSK guidelines Field of application: Waste water diameter DN pressure PN Test pressure in bar (water) Body Seat , DN PN Price in * , , , , , , , , , , ,00 * without operating element Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator upon request 30 Product group 1.9 Gate valves for sewage

31 1. Gate Valves Düker fittings and valves 31

32 Düker Tapping Valve TOP-Fix Type 1014 PN 16 for spot drilling under pressure Düker enamel finish for water for cast iron, steel and asbestos cement pipes DN 80 up to 300 Tapping valve with disc, vertical outlet Rp 1 ½" as per EN with DIN-DVGW type examination certificate (A) for potable water as per DVGW W 333 and DVGW W 336, maximum drilling diameter 38 mm, stem square 12 mm. Compact low design, can be mounted non-tilting, for pressure drilling without auxiliary valve, one turn for opening and closing, reliable end spots in the open and closed position, completely free and flow-efficient passage, no residual water between the superior and inferior body part, fully rubberized toothed disc, pinion shaft with 3fold O-ring-sealing, connecting screws countersunk and sealed, EPDM gaskets and plastic components according to DVGW W 270, DVGW tested and registered. Material Upper and lower body part made of EN-GJS (JS-1050) Pinion shaft stainless steel (X3CrNiMo13-4) Toothed disc stainless steel (X6Cr17) completely rubberised All screws made of stainless steel A2 Sealing gaskets EPDM All materials in contact with potable water correspond to the latest version of the German UBA guidelines. Operating Medium Potable and raw water up to 60 C Surface Protection Upper and lower body part inside and outside Düker enamel as per EN ISO 11177, DEV guideline class III soils. Clapping band for cast iron, steel and asbestos cement pipes (see page 35) Field of application: Drinking water up to +60 C Rp Price in * ½ 305,00 diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 Operation: Düker Quick telescopic stem extension set, restrained without pinning (see page 89) Stem extension set for connection GW (see page 90) Operating key (see page 86) Watch a fascinating animation about TOP 1014 and the Düker Quick stem extension set! 32 Product group 2.1 Tapping valves TOP type 1014

33 Düker Tapping Valve TOP-Drehfix Type 1014 with PE 100 welding outlet PN 16 for spot drilling under pressure Düker enamel finish for water for cast iron, steel and asbestos cement pipes DN 80 up to Service Connection Valves Tapping valve with disc, horizontal rotatable outlet with PE welding ends d 32, 40, 50 or 63, with DIN-DVGW type examination certificate (A) for potable water as per DVGW W 333 and DVGW W 336, maximum drilling diameter 38 mm, stem square 12 mm. Compact low design, can be mounted non-tilting, for pressure drilling without auxiliary valve, one turn for opening and closing, reliable end spots in the open and closed position, completely free and flow-efficient passage, no residual water between the superior and inferior body part, fully rubberized toothed disc, pinion shaft with 3fold O-ring-sealing, connecting screws countersunk and sealed, rotatable enamelled outlet bend without passage reduction, connection to the valve with an installation-friendly bajonet lock, with pre-installed weld-on end PE 100, EPDM gaskets and plastic components according to DVGW W 270, DVGW tested and registered. Material Upper and lower body part and outlet bend made of EN-GJS (JS-1050) Pinion shaft stainless steel (X3CrNiMo13-4) Toothed disc stainless steel (X6Cr17) completely rubberised All screws made of stainless steel A2 Sealing gaskets EPDM All materials in contact with potable water correspond to the latest version of the German UBA guidelines. Operating Medium Potable and raw water up to bis 60 C Surface Protection Upper and lower body part as well as outlet bend inside and outside Düker enamel as per EN ISO 11177, DEV guideline class III soils. Tapping valve TOP-Drehfix type 1014 enamel, vertical outlet for bend fitting DN Drilling max. Price in mm 305,00 Clapping band for cast iron, steel and asbestos cement pipes (see page 35) Drehfix bend fitting 360 enamel, with pre-installed PE spigot DN d Price in , , , ,00 Field of application: Drinking water up to +40 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 Operation: Düker Quick telescopic stem extension set, restrained without pinning (see page 91) Stem extension set for connection GW (see page 90) Operating key (see page 86) Drilling adapter for TOP-Drehfix Price in ,00 Product group 2.1 Tapping valves TOP type

34 Düker Tapping Valve TOP-Drehfix Type 1014 with push-fit socket outlet PN 16 for spot drilling under pressure Düker enamel finish for water for cast iron, steel and asbestos cement pipes DN 80 up to 300 Tapping valve with disc, horizontal rotatable outlet with push-fit socket d 32, 40, 50 or 63, with DIN-DVGW type examination certificate (A) for potable water as per DVGW W 333 and DVGW W 336, maximum drilling diameter 38 mm, stem square 12 mm. Compact low design, can be mounted non-tilting, for pressure drilling without auxiliary valve, one turn for opening and closing, reliable end spots in the open and closed position, completely free and flow-efficient passage, no residual water between the superior and inferior body part, fully rubberized toothed disc, pinion shaft with 3fold O-ring-sealing, connecting screws countersunk and sealed, rotatable enamelled outlet bend without passage reduction, connection to the valve with an installation-friendly bajonet lock, with push-fit socket for PE pipes, EPDM gaskets and plastic components according to DVGW W 270, DVGW tested and registered. Material Upper and lower body part and outlet bend made of EN-GJS (JS-1050) Pinion shaft stainless steel (X3CrNiMo13-4) Toothed disc stainless steel (X6Cr17) completely rubberised All screws made of stainless steel A2 Sealing gaskets EPDM All materials in contact with potable water correspond to the latest version of the German UBA guidelines. Operating Medium Potable and raw water up to bis 60 C Surface Protection Upper and lower body part as well as outlet bend inside and outside Düker enamel as per EN ISO 11177, DEV guideline class III soils. Tapping valve TOP-Drehfix type 1014 enamel, vertical outlet for bend fitting DN Drilling max. Price in mm 305,00 Clapping band for cast iron, steel and asbestos cement pipes (see page 35) Drehfix bend fitting 360 enamel, with push-fit socket for PE pipe DN d Price in , , , ,00 Field of application: Drinking water up to +40 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 Operation: Düker Quick telescopic stem extension set, restrained without pinning (see page 89) Stem extension set for connection GW (see page 90) Operating key (see page 86) Drilling adapter for TOP-Drehfix Price in ,00 34 Product group 2.1 Tapping valves TOP type 1014

35 Stainless Steel Clapping Bands for tapping valves TOP type Price List 2. Service Connection Valves Flat clamping band for cast iron, steel, cement mortar and asbestos cement pipes PN The clamps come in a set together with the gasket. Material Flat clamping band and bolts: , plastic-coated blue Nuts and washers: , nuts with sliding coating Sliding blocks: glass fibre reinforced plastic Protecting caps: plastics Saddle sealing gasket: EPDM DN Application Pipe outside Ø mm Length Price in DI PE-CM/AC , steel pipe series 1 88, , DI BT-PE-CM/AC/ steel1 114, , steel pipe series , DI BT-PE-CM/AC/ steel series 1 DI BT-PE/ steel pipe series 1 139, ,00 168, , DI pipe CM/AC , steel pipe series , DI BT-PE , DI BT/steel series 1 219, , DI PE , DI pipe CM/AC , DI BT-PE , AC-Pipe , DI BT-PE/ steel pipe series , DI CM , AC pipe , DI BT-PE/ steel pipe series 1 323, , DI CM , AC Pipe in preparation DI BT-PE , in preparation DI CM in preparation steel pipe series 1 406, in preparation Product group 2.1 Tapping valves TOP type

36 Düker Tapping Valve TOP PN 16, GW 336-1, for spot drilling under pressure Düker enamel finish for water for cast iron, steel and asbestos cement pipes DN TOP tapping valve with integrated service connection valve for top drilling with non-return flap TOP tapping valve with PE-HD connection according to DVGW G TOPsi tapping valve with integrated service connection valve for horizontal drilling 12 mm stem square, all elastomers and plastic parts according to W 270 material approval, DVGW tested and registered. diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 Material Body EN-GJS (JS 1050) Stem X20Cr13 Bonnet, obturator special brass Obturator entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the German UBA guidelines Surface protection Düker enamel inside and outside as per EN ISO 11177, DEV guideline class III soils. TOP tapping valve with internal pipe thread Field of application: Drinking water up to +60 C Rp Price in ¼ 372, ½ 372, ,00 TOP tapping valve with PE 100 SDR 11 Field of application: Drinking water up to +40 C DN d Price in , , , ,00 PE-HD-ends laid out for two weldings TOPsi tapping valve with internal pipe thread for horizontal drilling Field of application: Drinking water up to +60 C Rp Price in Operation: Stem extension set for connection ½ 282,00 GW (see page 90) Operating key (see page 86) 36 Product group 2.2 Tapping valves TOP and TOPsi type 1004

37 Düker Tapping Clamp Fig. 88 PN 10/ Price List 2. Service Connection Valves Tapping clamp fig. 88 with internal pipe thread for vertical and horizontal drilling Material Body EN-GJS (JS 1050) Surface protection inside and outside epoxy black RAL 9005 inside Düker enamel as per EN ISO according to the GSK guidelines outside bituminous coating Field of application: Drinking water up to +60 C Rp Price in Blind 42, , ¼ 47, ½ 48, ,00 Rp Price in Blind 69, , ¼ 74, ½ 75, ,00 Listed prices do not include the clapping bands (stainless steel). Clapping Band (Stainless Steel) for tapping valves TOP for tapping clamps fig. 88 Flat clamping band matching cast iron, steel and cement mortar pipe as well as asbestos cement pipe PN The clamps come in a set together with the gasket. Material Flat clamping band and bolts: Stainless steel 1.430, plastic-coated black Nuts: with sliding coating Spherical washers: Protection caps: plastics Saddle sealing gasket: EPDM Item no. DN Application Pipe outside Ø mm Length Price in DI/AC , , DICM , Steel 88, , DI/steel/AC 114, , DICM , Steel , DI , DICM/AC , Steel 139, , DI/Steel 168, , DICM/AC ,00 Item no. DN Application Pipe outside Ø mm Length Price in Steel , DI/steel , DI/steel 219, , DICM/AC , DI/steel , DI/steel , DICM/AC , AC , DI/steel 323,9 330, , DICM ,00 DI = ductile cast iron CM = cement mortar AC = asbestos cement Product group 2.2 Tapping valves TOP and TOPsi type

38 Düker Service Connection Valve Type 1004 PN 16, GW 336-1, EN 1074 part 1+2 Face-to-face dimension EN : , M4 Düker enamel finish for water Resilient-seated gate valve, internal stem thread with connecting dimension EN , inside and outside enamel according to the DEV guidelines for class III soils, EN ISO 11177, 12 mm stem square, rubberized wedge, EPDM gaskets as well as plastic parts according to W 270 material approval, DVGW tested and registered. Material Body EN-GJS (JS 1050) Stem X20Cr13 Bonnet, obturator special brass Obturator special brass entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection Düker enamel inside and outside Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 Upon request: inside and outside epoxy blue RAL 5005 according to the GSK guidelines DN Thread Price in " 206, ¼" 239, ½" 382, " 398,00 Operation: Stem extension set for connection GW (see page 90) Operating key (see page 86) 38 Product group 2.3 Service connection valves

39 Düker Service Connection Valve Type 1004 PN 5, GW Face-to-face dimension EN : , M4 epoxy finish for gas 2. Service Connection Valves Resilient-seated valve, internal stem thread, connecting dimension EN , epoxy yellow RAL 1023 according to GSK inside and outside, special brass stem nut, rubberized wedge, NBR gaskets, DVGW tested and registered. Material Body EN-GJS (JS 1050) Stem X20Cr13 Bonnet, obturator special brass Obturator entirely vulcanized (elastomer NBR) Surface protection inside and outside epoxy yellow RAL 1023 according to the GSK guidelines Field of application: All gases according to DVGW publication G 260/I diameter DN pressure PN Test pressure in bar Body Seat PG 3 5 bar Water Air ,5 and 6 DN Thread Price in " 320, ¼" 351, ½" 492, " 542,00 Operation: Stem extension set for connection GW (see page 90) Operating key (see page 86) The prices for the gas valves include the inspection certificate 3.1 according to EN and valve marking. Product group 2.3 Service connection valves 39

40 Düker Service Connection Valve Type 1004 PN 16, GW 336-1, with studs for welding on both sides PE 100 face-to-face dimension EN : , M4 Düker enamel finish for water Resilient-seated gate valve with PE-HD connections according to DVGW G with connecting dimensions according to DIN 8074/8075, enamel according to the guidelines for class III soils inside and outside, EN ISO 11177, 12 mm stem square, rubberized wedge, EPDM gaskets as well as plastic parts according to W 270, DVGW tested and registered. Material Body EN-GJS (JS 1050) Stem X20Cr13 Bonnet special brass Obturator special brass, entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection Düker enamel inside and outside Field of application: Drinking water up to +20 C Pipes DIN 8074, inspection report Engler-Bunte-Institute regarding connection technology on the basis of DVGW-VP-600, melting index group MFI 005 and 010, according to the guidelines of the DVGW publication G 477 and bulletin DVS diameter DN pressure PN SDR Test pressure in bar (water) Body Seat ,6 Upon request: inside and outside epoxy blue RAL 5005 according to the GSK guidelines DN d Wall thickness PE 100 SDR 11 Price in ,9 400, ,7 516, ,6 585, ,8 669,00 Operation: Stem extension set for connection GW (see page 90) Operating key (see page 86) 40 Product group 2.3 Service connection valves

41 Düker Service Connection Valve Type 1004 PN 5, GW 336-1, with studs for welding on both sides PE 100 face-to-face dimension EN : , M4 epoxy finish for gas 2. Service Connection Valves Resilient-seated gate valve with PE-HD connections according to DVGW G with connecting dimensions according to DIN 8074/8075, epoxy yellow RAL 1023 inside and outside according to GSK, 12 mm stem square, rubberized wedge, NBR gaskets, DVGW tested and registered. Material Body EN-GJS (JS 1050) Stem X20Cr13 Bonnet, obturator special brass Obturator entirely vulcanized (elastomer NBR) Surface protection inside and outside yellow RAL 1023 according to the GSK guidelines Field of application: All gases according to DVGW publication G 260/I Pipes DIN 8074, inspection report Engler-Bunte-Institute regarding connection technology on the basis of DVGW-VP-600, melting index group MFI 005 and 010, according to the guidelines of the DVGW publication G 477 and bulletin DVS diameter DN pressure PN SDR Test pressure in bar Body Seat PG 3 5 bar Water ,5 and 6 Air DN d Wall thickness Price in PE 100 SDR ,9 510, ,7 677, ,6 759, ,8 881,00 Operation: Stem extension set for connection GW (see page 90) Operating key (see page 86) The prices for the gas valves include the inspection certificate 3.1 according to EN and valve marking. Product group 2.3 Service connection valves 41

42 Düker Underground Hydrant Type 304, design A DN 80 PN 16, according to EN Düker enamel finish for water Connection flange according to EN , single shut-off, fully enamelled body with automatic drainage and protection against pressurised water, outlet cover with chain, self-locking cover as an option, secured obturator linkage, integrated flange sealing, all elastomers and plastic parts according to DVGW W 270, DVGW tested and registered, CE marking according to EN Material Body, bonnet, DIN outlet coupling, outlet cover: EN-GJS (JS 1050) Massive obturator linkage, stem X20Cr13 Stem nut and bonnet nut in special brass Obturator EPDM elastomer All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection inside and outside Düker enamel as per EN ISO 11177, DEV guideline for soil class III Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 Pipe covering m PN Construction Closing cover Price in ,8 16 flange standard 487, ,8 16 flange self-locking 521, flange standard 533, flange self-locking 567, ,25 16 flange standard 576, ,25 16 flange self-locking 610, ,5 16 flange standard 729, ,5 16 flange self-locking 763,00 Closing cover: Standard (cover with chain) self-closing cover as an option Suitable drain: drain type D made of PP see page 48 Accessories: Operating key (see page 86) 42 Product group 4.1 Underground hydrants

43 Düker Underground Hydrant Type 305, design AD DN 80 PN 16, according to EN Düker enamel finish for water 4. Hydrants Connection flange according to EN , single shut-off, fully enamelled body with automatic drainage and protection against pressurised water, outlet cover with chain, self-locking cover as an option, secured obturator linkage, integrated flange sealing, all elastomers and plastic parts according to DVGW W 270, DVGW tested and registered, CE marking according to EN Material Body, bonnet, DIN outlet coupling, outlet cover: EN-GJS (JS 1050) Massive obturator linkage, stem X20Cr13 Stem nut and bonnet nut in special brass Obturator EPDM elastomer Sealing ball steel, EPDM sheathed All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection inside and outside Düker enamel as per EN ISO 11177, DEV guideline for soil class III Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 Pipe covering m PN Construction Closing cover Price in ,8 16 flange standard 631,00 Closing cover: Standard (cover with chain) self-closing cover as an option ,8 16 flange self-locking 665, flange standard 679, flange self-locking 713, ,25 16 flange standard 719, ,25 16 flange self-locking 753, ,5 16 flange standard 879, ,5 16 flange self-locking 914,00 Suitable drain: drain type D made of PP see page 48 Accessories: Operating key (see page 86) Product group 4.1 Underground hydrants 43

44 Düker Underground Hydrant Type 306, Form A for chamber installation DN 65 PN 16, as per EN , closing anti-clockwise Düker enamel finish for water Connection flange according to EN and factory standard, 8 hole drilling (double drilling as per Württemberger chamber system for flexible positioning), single shut-off, fully enamelled body with automatic drainage and protection against pressurised water,secured obturator linkage, integrated flange sealing, all elastomers and plastic parts according to DVGW W 270. Material Body, bonnet, DIN outlet coupling, outlet cover: EN-GJS (JS 1050) Massive obturator linkage, stem X20Cr13 Stem nut and bonnet nut in special brass Obturator EPDM elastomer All materials in contact with potable water correspond to the latest version of the German UBA guidelines. Surface protection inside and outside Düker enamel as per EN ISO 11177, DEV guideline for soil class III Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 Item No. Pipe covering m Height mm PN Construction Price in , flange 403,00 version with clockwise closing on request Installation example H TT ball fitting DN H ca. mm Installation example with connection drum DN 65 and TT ball fitting DN 80, DN 100, DN 150 or DN Product group 4.2 Mahhole hydrants

45 4. Hydrants Düker fittings and valves 45

46 Düker Pillar Hydrant Type 494, design AUD DN 80 and 100, PN 16, according to EN with additional shut-off Düker enamel finish for water Connection flange according to EN , automatic drainage and protection against backflow and pressurised water, security lock of the internal mountings, traffic-area version with installation-friendly pre-determined breaking point, 2 B outlets, DN 100, optionally with or without A outlet, including drain set made of foam polystyrol, all elastomers and plastic parts according to DVGW W 270, DVGW tested and registered, CE marking according to EN Material Bottom, upper and lower part of the pillar EN-GJS (JS 1050) Aluminum operating cap, outlets and outlet covers Massive obturator linkage, stem X20Cr13 Guide piece, stem bearing, predetermined breaking coupling, bonnet nut special brass Brass seat ring, rubberized EPDM Obturator entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines Field of application: Drinking water up to 60 C diameter DN pressure PN Body Test pressure in bar (water) Seat ,6 Surface protection Bottom and lower part of the pillar inside and outside, upper part of the pillar inside: Düker enamel blue as per EN ISO 11177, DEV guideline soil class III Upper part of the pillar outside: Düker enamel red delivery including drain set made of foam polystyrol standard rotatable* DN Pipe covering m PN Price in , upper outlets B 1, , , , , upper outlets B 1, , , , , upper outlets B 1, , bottom outlet A 1, ,00 Accessories: Operating key (see page 86) * rotatable version with loose flange at the pre-determined breaking point 46 Product group 4.3 Pillar hydrants

47 Düker Pillar Hydrant Type 495, design AFUD DN 100 PN 16, with protective cover, according to EN with additional shut-off Düker enamel finish for water Connection flange according to EN , automatic drainage and protection against backflow and pressurised water, security lock of the internal mountings, traffic-area version with installation-friendly pre-determined breaking point, 2 upper valve outlets B under the protective cover, 1 bottom outlet A including drain set made of foam polystyrol, all elastomers and plastic parts according to W 270 material approval, DVGW tested and registered, CE marking according to EN Hydrants Material Bottom, upper and lower part of the pillar, valve head and hand wheel EN-GJS (JS 1050) Aluminum outlets and outlet covers Protective cover X5CrNi18-10 Massive obturator linkage, stem X20Cr13 Guide piece, stem bearing, predetermined breaking coupling, bonnet nut special brass Brass seat ring, rubberized EPDM Obturator entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection Bottom and lower part of the pillar inside and outside, upper part of the pillar inside: Düker enamel blue as per EN ISO 11177, DEV guideline soil class III Upper part of the pillar outside: Düker enamel red delivery including drain set made of foam polystyrol Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 DN Pipe covering m PN Price in , , , , ,00 Accessories: Operating key (see page 86) Product group 4.3 Pillar hydrants 47

48 4.4 Hydrant accessories Hydrant extension type 304/305 complete DIN outlet coupling extension type 304/305 Linkage extension type 304/305 mm Price in mm Price in mm Price in , , , , , , , , , , , ,00 Accessories Price in Drain type D 54, Protective fleece diam. 262x700 (flat: 410x700 length) 9,00 Ventilation Valves Price in for underground hydrants Hydralüft UH VA DN 80 PN 16 only air purge 1.222, for pillar hydrants Hydralüft ÜH D-040-R2" PN 16 air admission and air purge 1.416, Hydrant spare parts Spare parts underground hydrants Price in Obturator linkage pipe covering 0.80 hydrant type 304/ , Obturator linkage pipe covering 1.00 hydrant type 304/ , Obturator linkage pipe covering 1.25 hydrant type 304/ , Obturator linkage pipe covering 1.50 hydrant type 304/ , Outlet covering type 304/305 self-locking 60, Outlet covering type 304/305/393/394 (cap with chain) 36, Chain set 700 mm galvanised 13, Bonnet type 304 complete f. 0,80 m pipe covering 137, Bonnet type 304 complete f. 1,00 m pipe covering 137,00 Spare parts underground hydrants Price in Bonnet type 304 complete f. 1,25 m pipe covering 137, Bonnet type 304 complete f. 1,50 m pipe covering 137, Bonnet type 305 complete f. 0,80 m pipe covering 137, Bonnet type 305 complete f. 1,00 m pipe covering 137, Bonnet type 305 complete f. 1,25 m pipe covering 137, Bonnet type 305 complete f. 1,50 m pipe covering 137, DIN outlet coupling type 304/ , O-Ring 87-5 (DIN outlet coupling) 8, Orifice cover type 304/305 33,00 Spare parts pillar hydrants Price in Repair set 493/494/495 red 59, Stem bearing type 494/ , Ventilation valve type , Valve head type 495 complete 285, Safety clip for dismantling type ,00 Upper parts type 494/495 completely enamelled for replacement on request 48 Product group 4.4 Hydrant accessories, 4.5 Hydrant spare parts

49 4. Hydrants Düker fittings and valves 49

50 Düker Butterfly Valve Type 4510 PN 10/16 EN 1074 part 1+2 Face-to-face dimension EN 558 basic series 14 Düker enamel finish for water Resilient-seated butterfly valve, with slider crank gear and adjustable end stop, enamel inside and outside according to EN ISO and the DEV guideline, tested for soil class III (AB DVGW GW 9), flow-optimized entirely enamelled valve disc with double eccentric shaft bearing, all elastomer and plastic parts according to DVGW W 270, DVGW tested and registered. Material Body, valve disc EN-GJS (JS 1030) Retaining ring EN-GJS Profile gasket EPDM Shaft X20Cr 13 Bearing bush CC483K All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection Düker enamel inside and outside as per EN ISO 11177, DEV guideline for soil class III Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 Note: Pressure rating PN 25, price on request Operation/accessories: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator 1 Pneumatic drive 1 Hydraulic drive 1 1 special design upon request without accessories for stem extension set/ electrical actuator with hand wheel DN PN Price in Price in gearbox with gear flange for stem extension set / electrical actuator matching electrical actuator , ,00 SKI B F 10 B3 SA , ,00 SKI B F 10 B3 SA , ,00 SKI B F 10 B3 SA , ,00 SKII B F 10 B3 SA , ,00 SKII B F 10 B3 SA , ,00 SKII B F 10 B3 SA , ,00 SKII B F 10 B3 SA , ,00 SKII B F 10 B3 SA , ,00 SKII B F 10 B3 SA , ,00 SKII B F 10 B3 SA , ,00 SKII B F 10 B3 SA , ,00 SKII B F 10 B3 SA , ,00 SKIII F 10 B3 SA , ,00 SKIII F 10 B3 SA , ,00 SKIII F 10 B3 SA , ,00 SKIII F 10 B3 SA , ,00 SKIV F 10 B3 SA Product group 5.1 Butterfly valves

51 Düker Butterfly Valve Type 451 PN 10/16 EN 1074 part 1+2 Face-to-face dimension EN 558 basic series 14 Düker enamel finish for water Resilient-seated butterfly valve, with slider crank gear and adjustable end stop, enamel inside and outside according to EN ISO and the DEV guideline, tested for soil class III (AB DVGW GW 9), flow-optimized entirely enamelled valve disc with double eccentric shaft bearing, all elastomer and plastic parts according to DVGW W 270, DVGW tested and registered. Material Body, valve disc EN-GJS (JS 1030) Retaining ring from DN 700 up Profile gasket EPDM Shaft X20Cr 13 Bearing bush CC483K All materials in contact with potable water correspond to the latest version of the German UBA guidelines 5. Butterfly Valves Surface protection Düker enamel inside and outside as per EN ISO 11177, DEV guideline for soil class III Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 without accessories for stem extension set/ electrical actuator with hand wheel DN PN Price in Price in 51 gearbox with gear flange for stem extension set / electrical actuator matching electrical actuator , ,00 SKIV F 10 B3 SA , ,00 SKIV/GZ F 10 B3 SA , ,00 SKIV/GZ F 10 B3 SA , ,00 SKIV/GZ F 10 B3 SA , ,00 SKIV/GZ F 10 B3 SA , ,00 SG/GZ F 10 B3 SA , ,00 SKIV/GZ F 10 B3 SA , ,00 SG/GZ F 10 B3 SA , ,00 SG/GZ F 10 B3 SA , ,00 SG/GZ F 10 B3 SA 10.2 Product group 5.1 Butterfly valves Note: Pressure rating PN 25, price on request Operation/accessories: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) Electrical actuator 1 Pneumatic drive 1 Hydraulic drive 1 1 special design upon request 6. Stecksystem Novo 11. Verbindungen 7. Zubehör 8. Druckrohrformstücke 9. Druckrohrformstücke für Kunststoffrohrleitungen 10. Abwasserformstücke

52 Düker Butterfly Valve Long Body Type 4510/Type 451 with Bypass PN 10/16 EN 1074 part 1+2 Face-to-face dimension EN 558 basic series 15 Düker enamel finish for water Resilient-seated butterfly valve, with slider crank gear and adjustable end stop, enamel inside and outside according to EN ISO and the DEV guideline, tested for soil class III (AB DVGW GW 9), favorable flow behavior supporting entirely enamelled valve disc with double eccentric shaft bearing, bypass approx. 1/10 of the main nominal dimension, all elastomer and plastic parts according to DVGW W 270, DVGW tested and registered. Material Body, valve disc EN-GJS (JS 1030) Retaining ring EN-GJS-400-7, from DN 700 up Profile gasket EPDM Shaft X20Cr 13 Bearing bush CC483K All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection i nside and outside Düker enamel as per EN ISO 11177, DEV guideline for soil class III from DN 700 inside Düker enamel, outside 2-components epoxy paint blue RAL 5005 Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 Note: On request Butterfly valve long face-to-face without bypass Butterfly valve with bloc flanges for the mounting of ventilations DN PN Bypass DN Price in , , , , , , , , upon request upon request upon request upon request DN PN Bypass Price in DN upon request upon request upon request upon request Operation/accessories: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 87) Electrical actuator 1 Pneumatic drive 1 Hydraulic drive 1 1 special design upon request 52 Product group 5.1 Butterfly valves

53 Ring Butterfly Valve Type 487 PN 16 EN 1074 part 1+2 Wafer or lug type finish for water Resilient-seated butterfly valve, centric, operation with hand gear (DN ) or gearbox and hand wheel (DN ), wafer type for clamp connection between flanges PN 10/16 as per EN , or lug type for flange connection, inside and outside epoxy finish blue RAL 5015, layer thickness min. 250 µm, elastomer according to DVGW W 270, sleeve fixing: loose seat ring. DVGW tested and registered. Wafer type for clamp connection 5. Butterfly Valves Material Body EN-GJS (JS 1030) Disc stainless steel Sealing EPDM Shaft Hand gear / gear box aluminum All materials in contact with drinking water correspond to the latest version of the German UBA guidelines. Surface protection inside and outside epoxy, layer thickness min. 250 µm Field of application: Drinking water up to +60 C diameter DN pressure PN Lug type for flange connection Test pressure in bar (water) Body Seat ,6 6. Stecksystem Novo Wafer Type DN Operating pressure max. PN Version Price in hand gear 142, hand gear 142, hand gear 142, hand gear 153, hand gear 177, hand gear 213, hand gear 292, hand gear 343, hand gear 582, gear box and hand wheel 960, gear box and hand wheel 1.285, gear box and hand wheel 1.933, gear box and hand wheel 2.667, gear box and hand wheel 4.338, gear box and hand wheel 4.984, gear box and hand wheel 7.426,00 Product group 5.2 Ring butterfly valves 53 Lug Type DN Operating pressure max. PN Version Price in hand gear 150, hand gear 175, hand gear 210, hand gear 253, hand gear 333, hand gear 401, hand gear 604, gear box and hand wheel 1.159, gear box and hand wheel 1.523, gear box and hand wheel 2.256, gear box and hand wheel 3.104,00 Surcharge for gear box and hand wheel instead of hand gear in DN 25 up to DN 200: 250 EUR 11. Verbindungen 7. Zubehör 8. Druckrohrformstücke 9. Druckrohrformstücke für Kunststoffrohrleitungen 10. Abwasserformstücke

54 Düker Non-Slam Check Valve Type 8015 PN 10 PN 16, EN 1074 part 3 Face-to-face length EN 558 basic series 14 Düker enamel finish for water Resilient-seated backflow preventer, flanges as per EN , inside and outside enamel as per EN ISO as well as the DEV guideline; tested for soil class III (DVGW worksheet GW 9), guide rod and threaded bush stainless steel , spring , elastomer gaskets and plastic parts according to DVGW W 270. Hydraulically optimised for industrial water applications, water collection, pumping stations etc. required back pressure for tightness: 0.5 bar Design H + V = horizontal and vertical upwards - H + V = horizontal und vertikal von unten V = vertical downwards Material Body, body insert and valve disc EN-GJS or -14 Valve disc sealing completely rubberized with elastomer Guide rod and threaded bush Spring Guidance bush polymer All materials in contact with potable water correspond to the latest version of the German UBA guidelines. Field of application: Water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat flow direction backflow direction , ,6 0, ,5 27,5 0, ,5 Surface protection inside and outside Düker enamel as per EN ISO 11177, DEV guideline; for soil class III design H/V design V DN PN Length Price in , , , , , , , , , ,00 design H/V design V DN PN Length Price in , , , , , , , , , ,00 54 Product group 6.1 Non-slam check valves

55 Length Compensators for the Non-Slam Check Valve Double-flanged pipe inside and outside enamel as compensator for face-to-face length as per EN 558 basic series 48 DN PN Length mm Price in on request on request on request on request on request on request on request on request on request on request Example: Non-slam check valve with compensator (flange connection to be made on site) 6. Back Flow Preventers / Ventilation Valves PN 25 and PN 40 on request alternative: compensator also pre-installed Double-flanged pipe inside and outside enamel as compensator for face-to-face length as per EN 558 basic series 26 DN PN Length mm Product group 6.1 Non-slam check valves Price in on request on request on request on request on request on request on request on request on request on request PN 25 and PN 40 on request alternative: compensator also pre-installed Verbindungen 7. Zubehör 8. Druckrohrformstücke 9. Druckrohrformstücke für Kunststoffrohrleitungen 10. Abwasserformstücke

56 Non-Return Valve PN 10/16, EN 1074 part 3 Face-to-face length EN 558 basic series 48 finish for water Resilient-seated non-return valve for fast and complete shut-off of the backflow in pipelines, flanges as per EN , inside and outside epoxy blue RAL 5005 according to GSK, bonnet bolts A2, EPDM gaskets as per DVGW W 270. Delivery without ventilation device, bonnet nut can be exchanged for ventilation device required back pressure for tightness: 0.5 bar Material Body, bonnet and disc - EN-GJS (JS 1030) Disc gasket EPDM-vulcanised all around Bonnet nut brass CW 614 N Cover screws: A2 Shaft All materials in contact with potable water correspond to the latest version of the German UBA guidelines. Surface Protection inside and outside epoxy blue RAL 5005 according to the GSK guidelines Field of application: Water up to +60 C diameter DN pressure PN Body Test pressure in bar (water) flow direction Seat backflow direction ,6 0, ,5 Ventilation device brass, CW 614 N DN Operating pressure max. Price in , , , , , , , , , , , , ,00 DN Price in , ,00 56 Product group 6.2 Non-return valves

57 Air Valves D-46 NS DN 50 up to 100 PN 16 (operating pressure 0,2 16 bar) Enamel finish Three-way aeration and air release valve with integrated adjustable non-slam throttle disc as an active pressure surge buffer flange as per EN , body enamelled inside and outside Large orifice for ventilation and air release up to 7,854 mm², for start-up air release or for aeration in case of negative pressure in the pipeline. Small orifice for operational air release up to 13 mm², floater-controlled for permanent efficiency by air-free transport. Material Body EN-GJS Connection for aeration and air release, protective grating, floater, drainage PP Non-slam throttle disc, throttle insert, clamping ring PAGF Sealing gaskets EPDM 6. Back Flow Preventers / Ventilation Valves Surface protection Düker enamel inside and outside DN Price in , , ,00 Further Aeration and Air Release Valves Automatic three-way aeration and air release valve D-040 Body PAGF NW PN Price in ½" , ¾" , " , ½" , ¾" , " ,00 Aeration Stop Price in ,00 Further versions on request. Product group 6.3 Aeration and ventilation valves 57 Field of application: drinking water, raw water diameter DN pressure PN Sealing system ,2 up to 16 bar Operational Air Release Valve S-050 Body PAGF NW PN Price in ½" , ¾" , " , ½" , ¾" , " , ½" 6 250, ¾" 6 250, " 6 250, Verbindungen 7. Zubehör 8. Druckrohrformstücke 9. Druckrohrformstücke für Kunststoffrohrleitungen 10. Abwasserformstücke

58 DAWNING OF A NEW ERA The Düker Plunger Valve Type RKV 7015 The most notable aspects of a plunger valve: ð the flow passage is ring-shaped in any position ð the movable obturator is shaped like a piston ð the movement of the obturator is parallel to the axis of the pipeline Plunger valves are mainly used for applications where pressure rates, flow rates and water levels in vessels must be controlled exactly and reliably; any cavitation is to be directed in a way that no damage can occur on the valve or the following pipeline. With multiple functions such as shut-off valve, check valve, non-return valve, safety and measuring valve, the plunger valve has a key function in plants and transport pipelines: to shut off a pipeline to adjust flow rates and pressures to start up and close down pipelines behind pumps to start up turbines in a bypass to drain water reservoirs through bottom outlets This results in an extremely high strain during operation. Therefore a plunger valve must be designed to be robust, yet sensitive. The NEW Düker RKV type 7015 fulfils these superior and demanding requirements in total. With the support of CFD flow simulation as well as the finite elements method, the new valve has reached perfection in shape and function. Sophisticated technology, high-quality materials, low noise level, careful and precise manufacture and superior hygiene. These are the highlights: Guiding rails in the body for a superior life expectancy min. 8 guiding rails in 2 groups of 4 pieces each offset by 45 made of high-quality stainless steel with superior hardness, therefore resistant to wear fixed securely and tension-free in the body without bolting or welding without material mixing zones Main sealing for excellent operational safety robust large profile sealing ring mounted onto the piston protected from the flow positioned outside of the cavitation zone positioned outside of the abrasion zone Without any dead space for optimal hygiene water flow all around the piston sealed shaft bearing Maintenance friendliness significant reduction of time and cost expenditures piston made of high-quality stainless steel piston with inferior hardness compared to the guiding rails any wear occurs on the piston, not on the guiding rails piston continuously turnable piston easily replaceable The optimal adjustment range even in case of low quantities without critical ring gap is supported excellently by the robust, self-impeding and maintenance-free Düker slidercrank mechanism. The slidercrank gear adapts exactly to the torque progress of the valve. In the hydraulically effective closing end phase, the closing speed is reduced. This kinematic behaviour makes for an extremely soft closing. The danger of pressure surges is brought to a minimum. The new Düker plunger valve type 7015 is synonymous with perfection and quality Made in Germany : durable safe reliable economic. Available in the nominal dimensions DN 100, 200 and 300, pressure rating PN 10 up to PN 40. We will be glad to support you with our technical service for all questions and requests about the Düker plunger valve type RKV Düker fittings and valves

59 Düker Plunger Valve Type RKV 7015 as per EN 1074 part 1, 2 and 5 Face-to-face length EN 558 basic series 15 Düker epoxy finish for water Shut-off and control valve for pressure adjustment and quantity limiting, one-part body with eye bolts, flanges as per EN , inside and outside epoxy blue RAL 5005 according to GSK, ring-shaped passage, sealing both ways, in case of slotted cylinder one-way sealing, optimized flow channelling, control insert: seat ring, slotted cylinder or special versions depending on the operating data, guiding rails for the piston in the body made of stainless steel with superior hardness, fixed firmly in the body (without bolting or welding), robust profile sealing on the piston, piston turnable in case of wear on the guiding, sealing gaskets EPDM and plastic parts according to DVGW W 270. Material Body EN-GJS Guiding rails high-strength stainless steel, highly corrosion-resistant Piston Seat ring and control inserts Shaft Bearing bushings bronze CC483K Clamping ring Special materials on request All materials in contact with potable water correspond to the latest version of the German UBA guidelines. 7. Control Valves Surface protection inside and outside epoxy blue RAL 5005 according to the GSK guidelines inside and outside Düker enamel as per EN ISO 11177, DEV guideline on request Field of application: Drinking water and raw water up to +60 C diameter DN pressure PN Operation: Hand wheel (see page 85) Electrical actuator 1 Pneumatic drive 1 1 special design upon request Test pressure in bar (water) Body Seat , ,5 27, Watch the functioning of the Düker Plunger Valve RKV 7015 in a video! Find a helpful questionnaire for design adaption of the plunger valve at > fittings and valves > downloads Product group 7.1 Plunger valve 59

60 60 Düker fittings and valves

61 Düker Plug-in Socket Gate Valve Novo Type 4004 PN 16, EN 1074 part 1 + 2, GW Face-to-face dimension EN 558 basic series 13 Düker enamel finish for water Resilient-seated gate valve with double-chamber socket for the tensile strength ensuring connection to cast, steel and PE pipes, two-sided plug-in socket according to DIN TYTON with pre-chamber, enamel inside and outside according to the DEV guidelines for class III soils, EN ISO 11177, edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts in accordance with DVGW W 270, DVGW tested and registered. Material Body, bonnet and obturator EN-GJS (JS 1050) Stem X20Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection Inside and outside Düker enamel according to EN ISO 11177, DEV guideline class III soils Field of application: Drinking water up to +60 C 8. Novo Plug-in System diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 DN Price in * , , , , , , ,00 Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) * without operating element Listed prices do not include the connections. Product group 8.1 NOVO valves 61

62 Düker Spigot Socket Gate Valve Novo Type 4004 PN 16, EN 1074 part 1 + 2, GW Face-to-face dimension EN 558 basic series 13 Düker enamel finish for water Resilient-seated gate valve with double-chamber socket for tensile strength ensuring connection to cast steel and PE pipes, plug-in socket according to EN TYTON with pre-chamber, spigot according to 545, inside and outside enamel according to the DEV guideline for class III soil. EN ISO edge protection for bonnet and body, connecting screws A2, countersunk and sealed, medium-free stem bearing, rubberized wedge, EPDM gaskets and plastic parts in accordance with DVGW W 270, DVGW tested and registered. Material Body, bonnet and wedge EN-GJS (JS 1050) Stem X20Cr13 Stem nut and clamping piece special brass Obturator entirely vulcanized (elastomer EPDM) All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection inside and outside Düker enamel according to EN ISO 11177, DEV guideline class III soils Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 DN Price in * , , , , , , ,00 Operation: Hand wheel (see page 85) Operating key (see page 86) Stem extension set (see page 90) * without operating element Listed prices do not include the connections. 62 Product group 8.1 NOVO valves

63 Düker Underground Hydrant Type 304 S, design A DN 80 PN 16, according to EN Düker enamel finish for water Spigot end as per EN 545, single shut-off, fully enamelled body with automatic drainage and protection against pressurised water, outlet cover with chain, secured obturator linkage, all elastomers and plastic parts according to DVGW W 270, DVGW tested and registered, CE marking as per EN Material Body, bonnet, DIN outlet coupling, outlet cover: EN-GJS (JS 1050) Massive obturator linkage, stem X20Cr13 Stem nut and bonnet nut in special brass Obturator EPDM elastomer All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection inside and outside Düker enamel according to EN ISO 11177, DEV guideline class III soils Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,6 8. Novo Plug-in System Pipe covering m H PN Design Closing Cover Price in , Spigot end standard 792, , Spigot end self-locking 824, , Spigot end standard 822, , Spigot end self-locking 856, , Spigot end standard 842, , Spigot end self-locking 876, , Spigot end standard 1.052, , Spigot end self-locking 1.085,00 Closing cover: Standard (cover with chain) With self-locking cover Accessories: Drain (see page 48) Operating key (see page 86) Product group 8.1 NOVO valves 63

64 Düker Plug-in Socket Butterfly Valve Novo PN 10/16 EN 1074 part 1+2 Face-to-face dimension EN 558 basic series 14 Düker enamel finish for water Resilient-seated butterfly valve, with slider crank gear and adjustable end stop, with double-chamber socket for tensile strength ensuring connection to cast, steel and PE pipes, double-sided plug-in socket according to DIN TYTON with pre-chamber, enamel inside and outside according to EN ISO and the DEV guideline, tested for soil class III (AB DVGW GW 9), favorable flow behavior supporting entirely enamelled valve disc with double eccentric shaft bearing, all elastomer and plastic parts according to DVGW W 270, DVGW tested and registered. Material Body, valve disc EN-GJS (JS 1030) Retaining ring EN-GJS Profile gasket EPDM Shaft X20Cr 13 Bearing shafts CC483K All materials in contact with potable water correspond to the latest version of the German UBA guidelines Surface protection Inside and outside Düker enamel according to EN ISO 11177, DEV guideline class III soils Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) Body Seat ,5 27, ,6 DN PN Price in , , , , , ,00 Operation/Accessories: Operating key (see page 86) Stem extension set (see page 87) Listed prices do not include the connections. Slider crank gear with free shaft end. 64 Product group 8.1 NOVO valves

65 Düker Pipe Section with Novo Socket Type M PN 10/16, for water Socket pipe with double-chamber socket for tensile strength ensuring connection to cast steel and PE pipes, plug-in socket according to DIN TYTON with pre-chamber, spigot according to EN 545. Also suitable as hydrant extension. Material EN-GJS Surface protection : inside Düker enamel according to EN ISO 11177, outside bituminous coating : inside and outside Düker enamel as per EN ISO Field of application: Drinking water up to +60 C Socket version DN Length Item No. Item No. NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 8. Novo Plug-in System Listed prices do not include the connections. Upon request: Inside and outside epoxy blue RAL 5005 according to GSK Product group 8.2 NOVO fittings 65

66 Düker Hydrant Duck-foot Bend with Novo Sockets Type MMN and MMNR PN 10/16 for water according to EN 545 Double socket duckfoot bends with double-chamber sockets according to DIN TYTON with pre-chamber. For installation of plug-in hydrants. Material EN-GJS Surface protection : inside Düker enamel according to EN ISO 11177, outside bituminous coating : inside and outside Düker enamel as per EN ISO Field of application: Drinking water up to +60 C Type MMN Socket version DN Thread Item No. NOVO-SIT 80 2 x 1 ½" , ,00 NOVO-SIT 80 2 x 2" , ,00 NOVO-SIT , ,00 Type MMNR Socket version DN 1 DN 2 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 Listed prices do not include the connections. Upon request: Inside and outside epoxy blue RAL 5005 according to GSK With two lateral, internal pipe thread outlets 66 Product group 8.2 NOVO fittings

67 Düker Long Socket Tee with Socket Branch Type B PN 10/16, for water Long single socket tee with socket branch, with double-chamber socket NOVO in the passage, double-chamber socket NOVO in the centered branch, plug-in socket according to DIN TYTON with pre-chamber, spigot in the passage according to EN 545. For the installation of plug-in hydrants. Material EN-GJS Surface protection : inside Düker enamel according to EN ISO 11177, outside bituminous coating : inside and outside Düker enamel as per EN ISO Field of application: Drinking water up to +60 C Socket version DN 1 DN 2 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 8. Novo Plug-in System Listed prices do not include the connections. Upon request: Inside and outside epoxy blue RAL 5005 according to GSK Product group 8.2 NOVO fittings 67

68 Düker All Spigot Tee with Novo Socket Type MI PN 10/16, for water Single socket tee with spigot branch with one Novo double-chamber socket in the passage, plug-in socket according to DIN TYTON with pre-chamber, spigot in the passage and outlet according to EN 545. Material EN-GJS Surface protection : inside Düker enamel according to EN ISO 11177, outside bituminous coating : inside and outside Düker enamel as per EN ISO Field of application: Drinking water up to +60 C Socket version DN 1 DN 2 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT upon request upon request NOVO-SIT upon request upon request NOVO-SIT upon request upon request NOVO-SIT upon request upon request NOVO-SIT upon request upon request NOVO-SIT upon request upon request NOVO-SIT upon request upon request NOVO-SIT upon request upon request NOVO-SIT upon request upon request NOVO-SIT upon request upon request NOVO-SIT upon request upon request Listed prices do not include the connections. Upon request: Inside and outside epoxy blue RAL 5005 according to GSK 68 Product group 8.2 NOVO fittings

69 Düker All Spigot Tee Type IT PN 10/16, for water All spigot tee with spigot ends according to EN 545 for the installation of gate valves with plug-in socket. Material EN-GJS Surface protection : inside Düker enamel according to EN ISO 11177, outside bituminous coating : inside and outside Düker enamel as per EN ISO Field of application: Drinking water up to +60 C DN 1 DN , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , upon request upon request upon request upon request upon request upon request , , , , upon request upon request , , upon request upon request upon request upon request upon request upon request Upon request: Inside and outside epoxy blue RAL 5005 according to GSK 8. Novo Plug-in System Product group 8.2 NOVO fittings 69

70 Düker Novo Fitting Type S PN 10/16, face-to-face dimension 800 mm for water Smooth pipe with spigots according to EN 545. Material EN-GJS Surface protection : inside Düker enamel according to EN ISO 11177, outside bituminous coating : inside and outside Düker enamel as per EN ISO Field of application: Drinking water up to +60 C DN , , , , , , , ,00 Upon request: Inside and outside epoxy blue RAL 5005 according to GSK 70 Product group 8.2 NOVO fittings

71 Düker Novo Collar Type U PN 10/16 for water according to EN 545 Collar with double-chamber sockets on both sides, plug-in sockets according to DIN TYTON with pre-chamber. Collar one side double-chamber socket, plug-in socket according to DIN TYTON with pre-chamber; one side SMU screw-gland socket. Material EN-GJS Surface protection : inside Düker enamel according to EN ISO 11177, outside bituminous coating : inside and outside Düker enamel as per EN ISO Field of application: Drinking water up to +60 C Socket version DN NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 NOVO-SIT , ,00 SMU / NOVO-SIT , ,00 SMU / NOVO-SIT , ,00 SMU / NOVO-SIT , ,00 SMU / NOVO-SIT , ,00 8. Novo Plug-in System Listed prices do not include the connections. Upon request: Inside and outside epoxy blue RAL 5005 according to GSK Product group 8.2 NOVO fittings 71

72 Item Connection DN Flanged socket NOVO-SIT , , ,00 duckfoot bends (EN) NOVO-SIT , , ,00 Item Socket version DN Flanged sockets NOVO-SIT , , ,00 (EU) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 Item Socket version DN Angle Single socket bends NOVO-SIT , , ,00 (MK) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT : prices are without connection material 72 Product group 8.2 NOVO fittings

73 Item Socket version DN Angle Single socket bends NOVO-SIT , , ,00 (MK) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 Item Socket version DN 1 DN 2 Double socket tees NOVO-SIT , , ,00 with flanged branch NOVO-SIT , , ,00 (MMA) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 8. Novo Plug-in System NOVO-SIT : prices are without connection material Product group 8.2 NOVO fittings 73

74 Item Socket version DN 1 DN 2 Double socket tees NOVO-SIT , , ,00 with flanged branch NOVO-SIT , , ,00 (MMA) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 Item Socket version DN 1 DN 2 All socket tees NOVO-SIT , , ,00 (MMB) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT : prices are without connection material 74 Product group 8.2 NOVO fittings

75 Item Socket version DN 1 DN 2 All socket tees NOVO-SIT , , ,00 (MMB) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 8. Novo Plug-in System NOVO-SIT : prices are without connection material Product group 8.2 NOVO fittings 75

76 Item Socket version DN Angle Double socket bends NOVO-SIT , , ,00 (MMK) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT : prices are without connection material 76 Product group 8.2 NOVO fittings

77 Item Socket version DN Angle Double socket bends NOVO-SIT , , ,00 (MMK) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 Item Socket version DN Angle Double socket NOVO-SIT , , ,00 bends 90 (MMQ) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 8. Novo Plug-in System Item Socket version DN 1 DN 2 Double socket tapers NOVO-SIT , , ,00 (MMR) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT : prices are without connection material Product group 8.2 NOVO fittings 77

78 Item Socket version DN 1 DN 2 Double socket tapers NOVO-SIT , , ,00 (MMR) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 Item Socket version DN Angle Single socket NOVO-SIT , , ,00 bends 90 (MQ) NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT , , ,00 NOVO-SIT : prices are without connection material 78 Product group 8.2 NOVO fittings

79 Düker Thrust-resisting Joint System NOVO-SIT for cast iron and steel pipes, PN 10/16/25, for water restrained connection according to EN 545 Internal thrust-resisting joint for the plug-in socket connection for cast iron and steel pipe consisting of: TYTON gasket and NOVO-SIT ring with vulcanized metal segments, elastomers EPDM, according to material approval W 270. Material TYTON gasket EPDM Thrust-resisting joint ring EPDM Stainless steel segments DN PFA [bar] Pressure class No. of segments Price in C , C , C , C upon request C , C , C , C , C , C upon request C upon request C , C upon request C , C upon request C , C , C upon request 8. Novo Plug-in System Product group 8.3 NOVO connections 79

80 Düker Thrust-resisting Joint System NOVO-Grip III and NOVO-Grip PVC NOVO-Grip III for PE pipes PN 10/16 for water NOVO-Grip PVC for PVC pipes PN 10/16 for water restrained connection Internal thrust-resisting joint for the plug-in socket connection for PE/PVC pipes consisting of: GKS gasket and NOVO-Grip III / PVC ring, elastomers and plastic parts according to material approval W 270. Material GKS gasket EPDM locking ring POM NOVO-Grip III for PE pipes Item No. DN Diameter Price in , , , , * ,00 NOVO-Grip III for PE pipes * on DN 200, it is not possible to use the standard Novo socket for NOVO-Grip. Use only items with adapted geometry and marking for PE-HD pipes NOVO-Grip PVC for PVC pipes Item No. DN Diameter Price in , , , ,00 Note: When mounting a NOVO-Grip connection it is necessary to use a support sleeve. NOVO-Grip PVC for PVC pipes Stainless steel support sleeve for the use with PE-100 Item No. Dimensions Price in x 8.2 SDR 11 42, x 5.4 SDR 17 42, x 10.0 SDR 11 44, x 6.6 SDR 17 44, x 14.6 SDR 11 62, x 9.5 SDR 17 62, x 20,5 SDR 11 72, x 13.4 SDR 17 72,00 80 Product group 8.3 NOVO connections, 8.4 NOVO accessories

81 Düker PE Adapter Piece for Novo Sockets PN 10/16, for water, cast iron on PE Connector ensuring tensile strength for fittings, gate valves and butterfly valves for plug-in sockets NOVO-SIT PE adapter piece with factory-mounted support sleeve, circumferential retaining ring for holding the locking segments, PE spigot for all common welding methods SDR 11. Material Fitting made of PE 100 black Support sleeve and retaining ring made of stainless steel PE 100 DN Diameter Wall thickness Price in ,2 245, , ,4 372, ,8 424, ,6 496, ,4 516, ,2 516, ,5 516, ,7 886, , , , ,00 8. Novo Plug-in System Larger diameters on request 10. Abwasserformstücke 9. Druckrohrformstücke für Kunststoffrohrleitungen 8. Druckrohrformstücke Product group 8.4 NOVO accessories Verbindungen

82 Düker Laying Equipment V 300 D for pipes, fittings and valves All-purpose laying equipment V 300 D for the installation of cast iron and PE pipes, fittings and valves for plug-in sockets according to DIN TYTON and DIN TYTON with Novo pre-chamber. Set includes: 1 clamp with crank pin (on the pipe) 1 clamp for the tension rods (on the sockets), 2 lever rods. DN Price in , , , , , , ,00 Note: Please specify pipe type when placing an order. Lever rods also available separately on request. 82 Product group 8.4 NOVO accessories

83 Plug-in Sockets Dismantling Equipment Unlocking plates reusable for the dismantling of NOVO-SIT, NOVO-Grip, TYTON SIT and TYTON SIT PLUS connections Unlocking plates Price/item in ,00 Unlocking plates > DN 300 upon request Number of unlocking plates needed DN Pieces per set Novo Plug-in System Striking members Reusable striking members for holding the unlocking plates DN Price/item in , , ,00 Unlocking plates for plug-in hydrants DN 80 DN Price/item in ,00 Set: 3 pieces (required) Product group 8.4 NOVO accessories 83

84 Düker Flap Valves Fig. 125 PN 10/16, with flange epoxy finish for water Material Body and cover in EN-GJS (JS 1050) Brass flap shaft Elastomer flap sealing Surface protection inside and outside epoxy black RAL 9005 according to the GSK guidelines Fig. 125 with flange connection Field of application: Drinking water up to +60 C diameter DN pressure PN Test pressure in bar (water) body DN PN Face-to-face dimension standard Price in , , , , , , , , , , , , , , , ,00 84 Product group 9.1 Accessories

85 Cast Iron Hand Wheel DIN 3220 for Gate Valves Material black varnished GG20 DN AF Diameter mm Price in / / , / / , / , / / , / / ,00 Steel Plate Hand Wheel blue varnish DN AF Diameter mm Price in / / ,00 9. Accessories Product group 9.1 Accessories 85

86 Operating keys DIN 3223 A, B, C, E DIN 3223 Length x Width Price in form A Pillar hydrant small 34, form B Pillar hydrant large 160, form C Underground hydrants 75,00 and valves 1100 x form E Tapping valves 750 x , form E Tapping valves 1000 x , form E Tapping valves triangular 750 x ,00 Additional operating keys upon request. type C, E type A type B 86 Product group 9.1 Accessories

87 Düker Telescopic Stem Extension Set with flange bell with a third protection tube for butterfly valves Material Operating cap EN-GJS galvanised Rods S235JR zinc-plated Coupling EN-GJS galvanised Position indicator aluminum epoxy coated blue Centring cap red, sealed against the operating cap Outer tube PE-HD without position indicator with position indicator Rod length GL pipe covering Rd Valve Type Pipe covering (Rd ca.) GL Price in 0,80 1,30 m 196, DN without 1,00 1,50 m 205, , 125, 150, 200, 250, 300, 350, 400, 450, 500, 600 position indicator 1,20 1,80 m 229,00 PN mm shaft 1,70 2,70 m 282, DN 2,50 3,20 m 336,00 100, 125, 150, 200, 250, 300, 350, 400, 450, PN 16 0,80 1,30 m 760, with 1,00 1,50 m 769,00 DN position indicator , 125, 150, 200, 250, 300, 350, 400, 450 1,20 1,80 m 794,00 up to 47 turns PN mm shaft 1,70 2,70 m 847, ,50 3,20 m 901, ,80 1,30 m 196, DN 800, 900, 1000, 1200 without 1,00 1,50 m 205, PN 10 position indicator 1,20 1,80 m 229, mm shaft 1,70 2,70 m 282,00 DN , 800, 900, ,50 3,20 m 336,00 PN ,00 1,50 m 769,00 with DN position indicator 1,20 1,80 m 794,00 600, 700, 800, up to 470 turns PN 25 1,70 2,70 m 847,00 20 mm shaft ,50 3,20 m 901, DN 1,00 1,50 m 205, without 1,20 1,80 m 229,00 PN 10 position indicator mm shaft 1,70 2,70 m 282, DN 2,50 3,20 m 336, PN 16 1,00 1,50 m 769,00 with position indicator 1,20 1,80 m 794,00 DN up to 47 turns 500 1,70 2,70 m 847,00 PN mm shaft ,50 3,20 m 901,00 9. Accessories Protecting cover for position indicator 71,00 Product group 9.2 Stem extension sets 87

88 Stem Extension Sets for Butterfly Valves Definition pipe covering Definitions: GL = rod length, RD = pipe covering, GA = rod contact point. With the following formula and the GA value, the GL for the required RD can be calculated: GL = RD 170 mm GA By changing the formula it is also possible to calculate the RD: RD = GL mm + GA DN PN GA butterfly valve GL 0,80 1,30 m GL 1,00 1,50 m GL 1,20 1,80 m GL 1,70 2,70 m GL 2,50 3,20 m Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca /16/ mm 1,12 1,62 m 1,32 1,82 m 1,52 2,12 m 2,02 3,02 m 2,82 3,52 m /16/ mm 1,10 1,60 m 1,30 1,80 m 1,50 2,10 m 2,00 3,00 m 2,80 3,50 m /16/ mm 1,09 1,59 m 1,29 1,79 m 1,49 2,19 m 1,99 2,99 m 2,79 3,49 m /16 96 mm 1,07 1,57 m 1,27 1,77 m 1,47 2,07 m 1,97 2,97 m 2,77 3,47 m mm 1,12 1,62 m 1,32 1,82 m 1,52 2,12 m 2,02 3,02 m 2,82 3,52 m mm 1,04 1,54 m 1,24 1,74 m 1,44 2,04 m 1,94 2,94 m 2,74 3,44 m / mm 1,10 1,60 m 1,30 1,80 m 1,50 2,10 m 2,00 3,00 m 2,80 3,50 m /16/25 62 mm 1,03 1,53 m 1,23 1,73 m 1,43 2,03 m 1,93 2,93 m 2,73 3,43 m /16 75 mm 1,05 1,55 m 1,25 1,75 m 1,45 2,05 m 1,95 2,95 m 2,75 3,45 m mm 1,06 1,56 m 1,26 1,76 m 1,46 2,06 m 1,96 2,96 m 2,76 3,46 m mm 0,98 1,48 m 1,18 1,68 m 1,38 1,98 m 1,88 2,88 m 2,68 3,38 m /25 66 mm 1,04 1,54 m 1,24 1,74 m 1,44 2,04 m 1,94 2,94 m 2,74 3,44 m /16/25 41 mm 1,01 1,51 m 1,21 1,71 m 1,41 2,01 m 1,91 2,91 m 2,71 3,41 m /16 16 mm 0,99 1,49 m 1,19 1,69 m 1,39 1,99 m 1,89 2,89 m 2,69 3,39 m mm 1,11 1,61 m 1,31 1,81 m 1,51 2,11 m 2,01 3,01 m 2,81 3,51 m mm 0,94 1,44 m 1,14 1,64 m 1,34 1,94 m 1,84 2,84 m 2,64 3,34 m mm 1,06 1,56 m 1,26 1,76 m 1,46 2,06 m 1,96 2,96 m 2,76 3,46 m mm 1,27 1,77 m 1,47 1,97 m 1,67 2,27 m 2,17 3,17 m 2,97 3,67 m mm 1,01 1,51 m 1,21 1,71 m 1,41 2,01 m 1,91 2,91 m 2,71 3,41 m / mm 1,19 1,69 m 1,39 1,89 m 1,59 2,19 m 2,09 3,09 m 2,89 3,59 m / mm 1,14 1,64 m 1,34 1,84 m 1,54 2,14 m 2,04 3,04 m 2,84 3,54 m mm 1,06 1,56 m 1,26 1,76 m 1,46 2,06 m 1,96 2,96 m 2,76 3,46 m mm 1,11 1,61 m 1,31 1,81 m 1,51 2,11 m 2,01 3,01 m 2,81 3,51 m mm 1,02 1,52 m 1,22 1,72 m 1,42 2,02 m 1,92 2,92 m 2,72 3,42 m mm 1,01 1,51 m 1,21 1,71 m 1,41 2,01 m 1,91 2,91 m 2,71 3,41 m /25 49 mm 1,02 1,52 m 1,22 1,72 m 1,42 2,02 m 1,92 2,92 m 2,72 3,42 m mm 0,92 1,42 m 1,12 1,62 m 1,32 1,92 m 1,82 2,82 m 2,62 3,32 m suitable stem extension sets for gate valves, for butterfly valves with bypass Butterfly valve DN PN Bypass gate valve DN GA Gate valve GL 0,36 0,56 m GL 0,60 1,01 m GL 0,76 1,36 m GL 0,91 1,60 m GL 1,26 2,36 m Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca / mm 0,57 0,77 m 0,81 1,22 m 0,97 1,57 m 1,12 1,81 m 1,47 2,57 m / mm 0,52 0,72 m 0,76 1,17 m 0,92 1,52 m 1,07 1,76 m 1,42 2,52 m / mm 0,50 0,70 m 0,74 1,15 m 0,90 1,50 m 1,05 1,74 m 1,40 2,50 m / mm 0,45 0,65 m 0,69 1,10 m 0,85 1,45 m 1,00 1,69 m 1,35 2,45 m / mm 0,43 0,63 m 0,67 1,08 m 0,83 1,43 m 0,98 1,67 m 1,33 2,43 m / mm 0,37 0,57 m 0,61 1,02 m 0,77 1,37 m 0,92 1,61 m 1,27 2,37 m / mm 0,29 0,49 m 0,53 0,94 m 0,69 1,29 m 0,84 1,53 m 1,19 2,29 m 88 Product group 9.2 Stem extension sets

89 Düker Telescopic Stem Extension Set Quick with a third protection tube for tapping valve TOP type 1014 Thanks to an installation-friendly quick lock between the outer pipe, the stem extension set and the Düker Quick connection, the joint is restrained in one step! Material Square operating cap EN-GJS galvanised Coupling EN-GJS galvanised (included in delivery) Rod S235JR zinc-plated Centring cap red, sealed against the operating cap Outer tube PE-HD Outer tube bell for connection without pin Valve Operating square Connection Coupling Rod length GL Price in ,47 0,73 m 89, Square 0,62 1,02 m 89, Tapping valve TOP Type 1014 DIN 3223 E 20 x 20 mm 0,78 1,33 m 102, flange bell Düker Quick 0,93 1,63 m 106, ,42 2,38 m 110,00 9. Accessories Watch a fascinating animation about TOP 1014 and the Düker Quick stem extension set! Product group 9.2 Stem extension sets 89

90 Düker Telescopic Stem Extension Set GW with a third protection tube DVGW tested Düker tapping valve TOP, service valve 1004 and gate valve 2004 / 3004 / 4004 have a suitable connection for stem extension sets as per GW as a standard. The coupling with an installation-friendly clip pin is delivered separately for gate valves DN 40 up to 350. Material Square operating cap EN-GJS galvanised Rod S235JR zinc-plated Centring cap red, sealed against the operating cap Outer tube PE-HD Bell with additional drill hole PE Valve Operating square Connection Coupling Rod length GL Price in Note ,40 0,65 m 78, tapping valve 0,65 1,15 m 78,00 square 20 x 20 mm service valve DIN 3223 E 0,80 1,45 m 88,00 bell Ø 80 mm e.g. TOP and ,90 1,55 m 92, ,37 2,45 m 97, ,36 0,56 m 85, ,60 1,01 m 85, gate valve DN square 25 x 25 mm DIN 3223 C e.g. 2004, 3004 and 4004 bell Ø 80 mm 0,76 1,36 m 97, ,91 1,60 m 102, ,26 2,36 m 103, ,33 0,40 m 93, ,49 0,76 m 106, gate valve DN square 30 x 30 mm DIN 3223 C e.g. 2004, 3004 and 4004 bell Ø 100 mm 0,74 1,22 m 114, ,82 1,42 m 118, ,17 2,12 m 131,00 Delivery incl. coupling Delivery incl. coupling Delivery incl. coupling Coupling Set Stem extension sets as per GW Price in tapping valve / service valve (SW 12) 19, gate valve DN 40 / 50 (SW14) 19, gate valve DN 65 / 80 (SW17) 22, gate valve DN (SW19) 22, gate valve DN 200 (SW24) 25, gate valve DN (SW27) 27,00 Adapter Caps Price in Adapter cap GW for gate valve DN 40 / 50 / 65 10, Adapter cap GW for Top ,00 90 Product group 9.2 Stem extension sets

91 Stem Extension Sets for Gate Valves from DN 400 Düker stem exension set telescope T3 for gate valves with corrugated protection tube max. torque 500 Nm Supplied incl. coupling Valve Pipe covering Rd ca. Rod length GL Price in ,40 1,60 m 0,56 0,84 m 350, Gate valve 1,60 2,05 m 0,76 1,22 m 372, DN ,00 2,90 m 1,20 2,09 m 426, ,50 3,50 m 1,80 3,00 m 464, ,45 1,65 m 0,53 0,76 m 491, Gate valve 1,65 2,10 m 0,75 1,16 m 536, DN ,10 2,70 m 1,13 1,86 m 580, ,50 3,50 m 1,80 2,80 m 607,00 9. Accessories 10. Abwasserformstücke Product group 9.2 Stem extension sets Verbindungen

92 Stem Extension Sets as per DVGW worksheet GW Definition pipe covering Definitions: GL = rod length, RD = pipe covering, GA = rod contact point. With the following formula and the GA value, the GL for the required RD can be calculated: GL = RD 170 mm GA By changing the formula it is also possible to calculate the RD: RD = GL mm + GAR Service connection valve e.g DIN 3223 E square 20 x 20 mm bell Ø 80 mm DN GA Valve GL 0,40 0,65 m GL 0,65 1,15 m GL 0,80 1,45 m GL 0,90 1,55 m GL 1,37 2,45 m Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca ,69 0,94 m 0,94 1,44 m 1,09 1,74 m 1,19 1,84 m 1,66 2,74 m ,70 0,95 m 0,95 1,45 m 1,10 1,75 m 1,20 1,85 m 1,67 2,75 m ,70 0,95 m 0,95 1,45 m 1,10 1,75 m 1,20 1,85 m 1,67 2,75 m ,72 0,97 m 0,97 1,47 m 1,12 1,77 m 1,22 1,87 m 1,69 2,77 m Tapping valve TOP DIN 3223 E square 20 x 20 mm bell Ø 80 mm Valve GA Valve GL 0,40 0,65 m GL 0,65 1,15 m GL 0,80 1,45 m GL 0,90 1,55 m GL 1,37 2,45 m Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. TOP 236 0,81 1,06 m 1,06 1,56 m 1,21 1,86 m 1,31 1,96 m 1,78 2,86 m Tapping valve TOP 1014 DIN 3223 E square 20 x 20 mm bell Ø 80 mm Valve GA Valve GL 0,47 0,73 m GL 0,62 1,02 m GL 0,78 1,33 m GL 0,93 1,63 m GL 1,42 2,38 m Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. TOP ,68 0,93 m 0,93 1,43 m 1,08 1,73 m 1,18 1,83 m 1,65 2,73 m Gate valve DN e.g. 2004, 3004 and 4004 DIN 3223 C square 25 x 25 mm bell Ø 80 mm DN GA Valve GL 0,36 0,56 m GL 0,60 1,01 m GL 0,76 1,36 m GL 0,91 1,60 m GL 1,26 2,36 m Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca ,71 0,91 m 0,95 1,36 m 1,11 1,71 m 1,26 1,95 m 1,61 2,71 m ,73 0,93 m 0,97 1,38 m 1,13 1,73 m 1,28 1,97 m 1,63 2,73 m ,76 0,96 m 1,00 1,41 m 1,16 1,76 m 1,31 2,00 m 1,66 2,76 m ,75 0,95 m 0,99 1,40 m 1,15 1,75 m 1,30 1,99 m 1,65 2,75 m ,77 0,97 m 1,01 1,42 m 1,17 1,77 m 1,32 2,01 m 1,67 2,77 m ,79 0,99 m 1,03 1,44 m 1,19 1,79 m 1,34 2,03 m 1,69 2,79 m ,82 1,02 m 1,06 1,47 m 1,22 1,82 m 1,37 2,06 m 1,72 2,82 m Butterfly valve DN e.g. 2004, 3004 and 4004 DIN 3223 C square 30 x 30 mm bell Ø 100 mm DN GA Valve GL 0,33 0,40 m GL 0,49 0,76 m GL 0,74 1,22 m GL 0,82 1,42 m GL 1,17 2,12 m Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca. Rd pipe covering ca ,85 0,92 m 1,01 1,28 m 1,26 1,74 m 1,34 1,94 m 1,69 2,64 m ,02 1,09 m 1,18 1,45 m 1,43 1,91 m 1,51 2,11 m 1,86 2,81 m ,07 1,14 m 1,23 1,50 m 1,48 1,96 m 1,56 2,16 m 1,91 2,86 m ,15 1,22 m 1,31 1,58 m 1,56 2,04 m 1,64 2,24 m 1,99 2,94 m 92 Product group 9.2 Stem extension sets

93 Dismantling Joint Dismantling joint design FA lockable with continuous threaded rods flange connection as per EN adjustable +/- 25 mm Material Body: steel Profile sealing: EPDM Screw stay: zinc-plated, nuts A2 Screw stay VA stainless steel: on request Surface protection inside and outside powder epoxy coating inside enamel, outside epoxy: on request DN PN Construction length medium position Adjustable +/- 93 Length of screw stay No. of holes Weight Price in , , , , , , , , , , , , , , , , , , , , , , , , , ,00 Product group 9.3 Dismantling joints 9. Accessories 10. Abwasserformstücke 11. Verbindungen

94 Item Socket version DN 1 DN 2 PN Single socket SMU , , ,00 tees with spigot SMU , , ,00 and flanged branch SMU , , ,00 (A) SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 Item Socket version 1 Socket DN 1 DN 2 version 2 Single socket SMU SMU , , ,00 tees with spigot and SMU SMU , , ,00 socket branch (B) Item Socket version DN PN Flanged sockets (E) SMU , , ,00 Item Socket version DN PN Flanged socket TYT , , ,00 duckfoot bends (EN) TYT , , ,00 SMU , , ,00 SMU , , ,00 Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) 94 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

95 Item Socket version DN PN Flanged socket SMU , , ,00 bends 90 (EQ) Item Socket version DN PN Flanged sockets (EU) SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , , Pressure Pipe Fittings Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

96 Item Socket version DN PN Flanged sockets (EU) STB , , ,00 STB , , ,00 STB , , ,00 STB , , ,00 STB , , ,00 STB , , ,00 STB , , ,00 STB , , ,00 STB , , ,00 STB , , ,00 Item DN PN Length Flanged spigots (F) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 Socket version bolted-gland socket joint: prices include joint material 96 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

97 Item DN PN Length Double flanged pipes , , ,00 (FF)* , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Pressure Pipe Fittings * In-between lengths are available as well. For all lengths not mentioned we will invoice a surcharge of e 200 on the price of the closest larger length. Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

98 Item DN PN Length Double flanged pipes , , ,00 (FF)* , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 * In-between lengths are available as well. For all lengths not mentioned we will invoice a surcharge of e 200 on the price of the closest larger length. 98 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

99 Item DN PN Length Double flanged pipes , , ,00 (FF)* , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 504,00 529, , , , ,00 702,00 737, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Pressure Pipe Fittings * In-between lengths are available as well. For all lengths not mentioned we will invoice a surcharge of e 200 on the price of the closest larger length. Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

100 Item DN PN Length Double flanged pipes , , ,00 (FF)* ,00 510, , , , , , , , , , , , , , , , , ,00 664, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 * In-between lengths are available as well. For all lengths not mentioned we will invoice a surcharge of e 200 on the price of the closest larger length. 100 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

101 Item DN PN Length Double flanged pipes , , ,00 (FF)* , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Pressure Pipe Fittings * In-between lengths are available as well. For all lengths not mentioned we will invoice a surcharge of e 200 on the price of the closest larger length. Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

102 Item DN PN Length Double flanged pipes , , ,00 (FF)* , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 * In-between lengths are available as well. For all lengths not mentioned we will invoice a surcharge of e 200 on the price of the closest larger length. 102 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

103 Item DN PN Length Double flanged pipes , , ,00 (FF)* , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 Item DN Surcharge for flanged pipes with cast-on or welded-on puddle flange , , , , , , , , , , , , , Pressure Pipe Fittings * In-between lengths are available as well. For all lengths not mentioned we will invoice a surcharge of e 200 on the price of the closest larger length. Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

104 Item DN PN Angle Double flanged bends , , ,00 (FFK) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

105 Item DN PN Angle Double flanged bends , , ,00 (FFK) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Pressure Pipe Fittings Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

106 Item DN 1 DN 2 PN Length Double flanged tapers , , ,00 concentric (FFR) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 427,00 447, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

107 Item DN 1 DN 2 PN Length Double flanged tapers , , ,00 concentric (FFR) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Pressure Pipe Fittings Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

108 Item DN 1 DN 2 PN Length Double flanged tapers , , ,00 excentric (FFRe) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 844, , , , , , , , , , , ,00 790, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

109 Item Socket version DN Angle Single socket bends SMU , ,00 (MK) SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 SMU , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 SMU , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , , Pressure Pipe Fittings Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

110 Item Socket version DN Angle Single socket bends SMU , ,00 (MK) SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 Item Socket version 1 Socket DN 1 DN 2 PN version 2 Double socket tees SMU SMU , , ,00 with flanged branch SMU SMU , , ,00 (MMA) SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) 110 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

111 Item Socket version 1 Socket version Tyton: prices are without joint material Socket DN 1 DN 2 PN version 2 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings 111 Double socket tees TYT TYT , , ,00 with flanged branch TYT TYT , , ,00 (MMA) TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT ,00 954, ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , , Pressure Pipe Fittings 11. Verbindungen

112 Item Socket version 1 Socket DN 1 DN 2 PN version 2 Double socket tees TYT TYT , , ,00 with flanged branch TYT TYT , , ,00 (MMA) TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 Socket version Tyton: prices are without joint material 112 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

113 Item Socket version 1 Socket DN 1 DN 2 PN version 2 Double socket tees STB STB , , ,00 with flanged branch STB STB , , ,00 (MMA) STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 Item Socket version 1 Socket DN 1 DN 2 version 2 All socket tees SMU SMU , , ,00 (MMB) SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , , Pressure Pipe Fittings Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) Socket version bolted-gland socket joint: prices include joint material Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

114 Item Socket version 1 Socket DN 1 DN 2 version 2 All socket tees TYT SMU , , ,00 (MMB) TYT TYT , , ,00 TYT SMU , , ,00 TYT SMU , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT SMU , , ,00 TYT SMU , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT SMU , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT SMU , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) 114 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

115 Item Socket version 1 Socket DN 1 DN 2 version 2 All socket tees TYT TYT , , ,00 (MMB) TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 Double socket pieces with 45 socket branch (MMC): see sewage programme page 134 Item Socket version 1 Socket DN Angle version 2 Double socket bends SMU SMU , , ,00 (MMK) SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , , Pressure Pipe Fittings STB STB , , ,00 STB STB , , ,00 Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) Socket version bolted-gland socket joint: prices include joint material Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

116 Item Socket version 1 Socket DN Angle version 2 Double socket bends SMU SMU , , ,00 (MMK) SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 STB STB , , ,00 STB STB , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) Socket version bolted-gland socket joint: prices include joint material 116 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

117 Item Socket version 1 Socket DN Angle version 2 Double socket bends TYT TYT , , ,00 (MMK) TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 STB STB , , ,00 STB STB , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , , Pressure Pipe Fittings STB STB , , ,00 STB STB , , ,00 Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) Socket version bolted-gland socket joint: prices include joint material Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

118 Item Socket version 1 Socket DN Angle version 2 Double socket SMU SMU , , ,00 bends 90 (MMQ) SMU SMU , , ,00 Item SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 STB STB , , ,00 STB STB , , ,00 Socket version 1 Socket DN 1 DN 2 version 2 Double socket tapers SMU SMU , , ,00 (MMR) SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) Socket version bolted-gland socket joint: prices include joint material 118 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

119 Item Socket version 1 Socket DN 1 DN 2 version 2 Double socket tapers TYT TYT , , ,00 (MMR) TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 TYT TYT , , ,00 Item Socket version DN Angle Single socket bends SMU , , ,00 90 (MQ) SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , , Pressure Pipe Fittings Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

120 Item DN PN Double flanged , , ,00 duckfoot bends (N) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 Item Socket version DN Plugs (P) SMU ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 SMU , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 TYT , , ,00 Item DN Thread Screw plugs (PX) SMU 40 1" ,00 (including rubber gasket and threaded hole) SMU 40 1 ¼" ,00 SMU 40 1 ½" ,00 SMU 40 2" ,00 Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) 120 Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

121 Item DN PN Double flanged bends , , ,00 90 (Q) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 Item DN 1 DN 2 PN Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings 121 All flanged tees , , ,00 (T) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Pressure Pipe Fittings 11. Verbindungen

122 Item DN 1 DN 2 PN All flanged tees , , ,00 (T) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

123 Item DN 1 DN 2 PN Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings 123 All flanged tees , , ,00 (T) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Pressure Pipe Fittings 11. Verbindungen

124 Item DN 1 DN 2 PN All flanged tees , , ,00 (T) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 Item DN 1 DN 2 PN All flanged cross tees , , ,00 (TT) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

125 Item Socket version 1 Socket DN version 2 Collars SMU SMU , , ,00 (U) SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 SMU SMU , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 STB STB , , ,00 Item DN PN Blank flanges , , ,00 (X) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Pressure Pipe Fittings Socket version Tyton: prices are without joint material Socket version screw-gland: prices are including screw ring (without sealing gasket and gliding ring) Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings Verbindungen

126 Item Ø Surcharge for threaded holes in blank flanges up to 1" 24,00 upon request upon request 1 1 4", 1 1 2" 28,00 upon request upon request 2" 34,00 upon request upon request 2 1 2", 3", 4" upon request upon request upon request Hatchboxes see sewage programme page 134 Item DN Transition flange 4/8 holes ,00 Item DN PN Flanged bellmouths , , , , , , , , , , , , , , , , , Product group 10.1/10.11/10.2/10.12/10.3/10.13 Pressure Pipe Fittings

127 10. Pressure Pipe Fittings Düker fittings and valves Verbindungen

128 Item DN D PN Flanged sockets , ,00 (E-KS) , , , , , , , , , , , , , , , , ,00 368, , , ,00 426, , , , ,00 Item DN D PN Flanged socket , ,00 duckfoot bends (EN-KS) , , , ,00 Item DN D PN Flanged spigots , ,00 (F-KS) , , , , , , , , , , , , , , , , ,00 521, , , ,00 610, , , , ,00 Item DN 1 D DN 2 PN Socket version KS: prices include the sealing gasket Double socket tees , ,00 with flanged branch , ,00 (MMA-KS) , , , , , , , , , , , , , , Product group 11.1 Pressure pipe fittings for plastic pipelines

129 Item DN 1 D DN 2 PN Item DN 1 D 1 DN 2 D 2 All socket tees , ,00 Double socket tees , ,00 with flanged branch , ,00 (MMA-KS) , ,00 (MMB-KS) , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 570, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Pressure Pipe Fittings for Plastic Pipelines Socket version KS: prices include the sealing gasket Product group 11.1 Pressure pipe fittings for plastic pipelines 129

130 Item DN 1 D 1 DN 2 D 2 All socket tees , ,00 (MMB-KS) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 Item DN D Branch threaded hole Double sockets with " , ,00 internal threaded " , ,00 branch (MMI-KS) " , , " , , " , , " , , " , , " , , " , ,00 Item DN 1 D 1 DN 2 D 2 Double socket tapers , ,00 (MMR-KS) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,00 Socket version KS: prices include the sealing gasket 130 Product group 11.1 Pressure pipe fittings for plastic pipelines

131 11. Pressure Pipe Fittings for Plastic Pipelines Düker fittings and valves 131

132 Item Socket Type DN 1 DN 2 Angle SM 90 clay pipe socket ,00 clay pipe socket ,00 clay pipe socket ,00 clay pipe socket ,00 Drilling saddle piece for cast iron, steel or fibre cement pipe 90 branch with clay pipe socket and NBR sealing Item Socket Type DN 1 DN 2 Angle SM 45 clay pipe socket ,00 clay pipe socket ,00 Drilling saddle piece for cast iron, steel or fibre cement pipe 45 branch with clay pipe socket and NBR sealing Item Socket Type DN 1 DN 2 Angle SI 90 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 Drilling saddle piece for cast iron, steel or fibre cement pipe 90 branch with spigot for ductile iron pipe Item Socket Type DN 1 DN 2 Angle SI 90 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 spigot end ,00 Drilling saddle piece for cast iron, steel or fibre cement pipe 90 branch with spigot for clay pipe Item Socket Type DN 1 DN 2 Angle SI 45 spigot end ,00 Drilling saddle piece for cast iron, steel or fibre cement pipe 45 branch with spigot for ductile iron pipe 132 Product group 12.1 Pipe fittings for sewage pipelines

133 Item Socket Type DN 1 MM TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYTON coupling with TYTON NBR seals Item DN 1 DN 2 Angle ICI ,00 Spigot end branch Item Socket Type 1 Socket DN 1 DN 2 Angle Type 2 MMI 45 TYT spigot end ,00 Double socket branch with TYTON sockets, branch with spigot for ductile iron pipe Item Socket Type 1 Socket DN 1 DN 2 Angle Type 2 MMI 67 TYT spigot end ,00 Double socket branch with TYTON sockets, branch with spigot for clay pipe Item Socket Type 1 Socket DN 1 DN 2 Angle Type 2 MMM TYT clay pipe socket ,00 Double socket branch with TYTON sockets, branch with clay pipe socket and NBR sealing 12. Pipe Fittings for Sewage Pipelines Sewage fittings: prices are including TYTON sealing gasket NBR Product group 12.1 Pipe fittings for sewage pipelines 133

134 Item DN 2 RVD ,00 Pipe sealing cap complete Item Socket Type DN 1 SA TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 TYT ,00 Manhole connection piece with TYTON socket and TYTON NBR sealing Item DN 1 PN red red blue Double flanged , ,00 blue hatchbox , , , , , , , , , , , , , , , , , ,00 Hatchbox with TYTON sockets: on request Item Socket Type 1 Socket DN 1 DN 2 Type 2 MMC TYT TYT ,00 TYT TYT ,00 TYT TYT ,00 TYT TYT ,00 TYT TYT ,00 Double socket pieces with 45 socket branch Sewage fittings: prices are including TYTON sealing gasket NBR 134 Product group 12.1 Pipe fittings for sewage pipelines

135 12. Pipe Fittings for Sewage Pipelines Düker fittings and valves 135

136 Item DN Screwed socket connection with Düker SPEZIAL thrust-resistant joint consisting of: screw ring with gliding chamfer, locking ring, gliding ring and sealing gasket , , ,60 Item DN Screwed socket connection with ,40 Düker SPEZIAL thrust-resistant joint , ,10 DN 80 up to DN 250 consisting of: screw ring with gliding chamfer, ,30 locking ring, SPEZIAL screw ring, gliding ring and sealing gasket , ,70 DN 300 up to DN 400 consisting of: screw ring with gliding chamfer, ,30 locking ring, SPEZIAL screw ring, gliding ring and sealing gasket ,90 Item DN EPDM EPDM NBR Sealing gasket screw-gland socket , , , , , , , , , , , , , , , , , , , , , , , , , ,70 NBR Item DN Gliding ring standard for screw-gland socket , , , , , , , , , , , , , Product group 13.1 Thrust-resistant connections for screw-gland sockets

137 Item DN blue Screw ring for screw-gland socket blue black black , , , , , , , , , , , , , , , , , , , , , , , , , ,20 Item DN TYTON SIT PLUS including marking ring EPDM , , , , , , , , , , ,90 Item DN EPDM EPDM NBR Sealing gasket TYTON , ,40 NBR , , , , , , , , , , , , , , , , , , , , , , , , , ,20 Product group 13.1/13.2 Thrust-resistant connections for screw-gland sockets and 137 TYTON sockets 13. Socket Connections