Size : Ends: Min Temperature : Max Temperature : Materials : SS 304 belt

Size: px
Start display at page:

Download "Size : Ends: Min Temperature : Max Temperature : Materials : SS 304 belt"

Transcription

1 Size : Ends: Min Temperature : Max Temperature : DN 21 to DN 516 For rigid pipes - 10 C (with EPDM gasket) + 60 C ( for temporarily used and EPDM gasket ) Max Pressure : 20 Bars up to DN140 Specifications : EPDM or NBR gasket SS 304 belt For PE, PVC, steel and ductile iron pipes Materials : SS 304 belt Page 1 sur 5

2 SPECIFICATIONS : SS 304 belt EPDM or NBR gasket For PE, PVC, steel and ductile iron pipes USE: Drinkable water for Ref. 1401, 1403 and 1406 ( EPDM ) Irrigation and sewage systems for Ref ( NBR ) Min and max Temperature Ts : - 10 C to + 60 C ( for temporarily used ) for EPDM gasket types Ref Min and max Temperature Ts : + 0 C to + 85 C ( for temporarily used ) for NBR gasket types Ref.1405 Max pressure Ps : see graph under DN Ps ( Bars ) RANGE : Temporarily repair clamp type M, 1 bolt length 80 mm with EPDM gasket Ref.1401 from DN 21 to DN 173 Repairing for complete break type B, 3 bolts, length 200 mm with EPDM gasket Ref.1403 from DN 48 to DN 285 Repairing for complete break type B, 3 bolts, length 200 mm with NBR gasket Ref.1405 from DN 48 to DN 285 Repairing for complete break type D, 3x2 bolts, length 200 mm with EPDM gasket Ref.1406 from DN 88 to DN 516 MATERIALS : Item Designation Materials Ref Materials Ref Insert SS 304 SS Gasket EPDM (ACS) NBR 3 Bolting Steel 6.S Steel 6.S 4 Clamp Ductile iron EN GJS Ductile iron EN GJS Page 2 sur 5

3 SIZE Ref ( in mm ) : Ref.1401 Type M (Repairing) 1 bolt, Length 80mm Ref.1403 Type B (Repairing for comp. Break) 3 bolts, Length 200mm Ref.1405 Type B (Repairing for comp. Break) 3 bolts, Length 200mm Ref. pipe Ps Weig. Ref. pipe Ps Weig. Ref. pipe (Bar) (Kg) (Bar) (Kg) Mini Maxi Mini Maxi Mini Maxi Ps (Bar) Weig. (Kg) Page 3 sur 5

4 SIZE Ref.1406 ( in mm ) : Ref.1406 Type D ( Repairing for comp. Break ) 3 bolts x2,length 200mm Ref. pipe Mini Maxi Ps (Bar) Weig. (Kg) Page 4 sur 5

5 STANDARDS : Fabrication according to ISO 9001 : 2008 Directive 97/23/CE : Products excluded from directive ( Article 1, 3.2 ) French water agreement A.C.S. N 16 ACC NY 049 for types with EPDM gasket Ref ADVICE : Our opinion and our advice are not guaranteed and SFERACO shall not be liable for the consequences of damages. The customer must check the right choice of the products with the real service conditions. INSTALLATION INSTRUCTIONS 1.1 Storage The equipment has to be stored in covered places, protected from the sun, rain and all other atmospheric agents. Moreover it has to be avoided that the seal comes in contact with dust and dirt. 1.2 Installation The structure and the construction method allow a good facility and fast assembly of the collar on the pipe to repair. Here follow are described the operations to carry out during the installation: 1. Clean the part of the pipe to be repair from eventual soil deposits; 2. Position the repair clamp in correspondence with the cut or the hole; 3. Ensure that the tapered end of the gasket is not folded on itself in any point, and that it is well extended on the pipeline to be repaired; Note: we suggest greasing the tapered end with soapy water, grease or Vaseline. 4. Put the opposite terminal of the clamp on the tapered end. 5. To insert the threaded studs in the respective positions of the buttonholes and manually shut. 6. Rotate the repair clamp in the indicated direction by the arrow printed on the label (indispensable operation for the definitive correct extension of the tapered end) possibly making sure that the damaged section of the pipeline remains under the section of vulcanized plate in the gasket. 7. Uniformly and gradually tighten the three or more screws so that the two clamps come together during the tightening, always parallel to each other according to the recommended tightening torque. Note: make sure during this phase that the vulcanized welt sheet in the gasket, does not strain and it keeps its preformed bend: if it strains, it will compromise the seal. Page 5 sur 5

Materials : Ductile iron body EN GJS

Materials : Ductile iron body EN GJS Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications

More information

Materials : Ductile iron body EN GJS

Materials : Ductile iron body EN GJS Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation Ductile

More information

Materials : Ductile iron body EN GJS

Materials : Ductile iron body EN GJS Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN16 up to DN300-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation

More information

Materials : Ductile iron body EN GJS

Materials : Ductile iron body EN GJS Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation

More information

DN 50 to 300 Flanges GN10/16-10 C C Max Pressure : 16 Bars Specifications : Cast iron disc All positions Low head loss

DN 50 to 300 Flanges GN10/16-10 C C Max Pressure : 16 Bars Specifications : Cast iron disc All positions Low head loss Size : Ends : Min Temperature : Max Temperature : DN 50 to 300 Flanges GN10/16-10 C + 130 C Max Pressure : 16 Bars Specifications : Cast iron disc All positions Low head loss Materials : Cast iron Page

More information

Materials : Ductile iron body EN GJS

Materials : Ductile iron body EN GJS Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1 Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges PN10/16-15 C + 110 C ( 130 C C temporarily) Max Pressure : 16 Bars up to DN300, 10 bars over Specifications

More information

Materials : Cast iron or stainless steel body

Materials : Cast iron or stainless steel body Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges PN10/16 or PN25-10 C + 90 C for NBR, 110 C for EPDM,180 C for FKM Max Pressure : 10 to 16 Bars ( according

More information

Materials : Carbon steel or stainless steel

Materials : Carbon steel or stainless steel Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges

More information

Materials : Ductile iron EN GJS body, EPDM seat

Materials : Ductile iron EN GJS body, EPDM seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 20 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1. * according to DN

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1. * according to DN Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 300 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 80 C Max Pressure : 16 Bars Specifications : Long neck for isolation

More information

Size : Ends : Min Temperature : Max Temperature : Materials : ASTM A351 CF8M body

Size : Ends : Min Temperature : Max Temperature : Materials : ASTM A351 CF8M body Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation

More information

Materials : Carbon steel or Stainless steel

Materials : Carbon steel or Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges GN16-10 C +80 C in NBR, 110 C in EPDM, 180 C in FKM Max Pressure : 16 Bars up to DN200 ( 10 bars over ) Specifications : Wafer

More information

Materials : Ductile iron EN GJS body, EPDM seat

Materials : Ductile iron EN GJS body, EPDM seat Reinforced lug from DN200 to DN1400 : Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16-20 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications

More information

Materials : Cast iron body EN GJL-250

Materials : Cast iron body EN GJL-250 Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 200 PN16 flanges R.F. - 10 C + 80 C with EPDM seat, 120 C with Metal seat Max Pressure : 16 Bars Specifications : Swing check

More information

Materials : Ductile iron body EN GJS

Materials : Ductile iron body EN GJS Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation

More information

Materials : Cast iron body EN GJL-250

Materials : Cast iron body EN GJL-250 Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 600 Flanges R.F. PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200 ( 10 bars over ) Specifications : Removable stainless

More information

SWING CHECK VALVE ISO PN16

SWING CHECK VALVE ISO PN16 Model/Ref: 360-362 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to 200 ISO PN10/16 flanges - 10 C + 80 C with EPDM seat, 120 C with Metal seat Max Pressure : 16 Bars

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1200 Between flanges PN10/16, ANSI150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :

More information

Materials : Cast iron or Stainless steel

Materials : Cast iron or Stainless steel Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars

More information

DN 3/8" to 4" Female BSP - 10 C C Max Pressure : 25 Bars up to DN 1 Specifications : All positions Female / Female BSP Brass / S.S.

DN 3/8 to 4 Female BSP - 10 C C Max Pressure : 25 Bars up to DN 1 Specifications : All positions Female / Female BSP Brass / S.S. Size : Ends : Min Temperature : Max Temperature : DN 3/8" to 4" Female BSP - 10 C + 100 C Max Pressure : 25 Bars up to DN 1 Specifications : All positions Female / Female BSP Brass / S.S. throttle Materials

More information

Size : Ends : Min Temperature : Max Temperature : Materials : PVC-U

Size : Ends : Min Temperature : Max Temperature : Materials : PVC-U Size : Ends : Min Temperature : Max Temperature : DN 15 to 65 Female / Female BSP or glued ends + 0 C + 60 C Max Pressure : 16 Bars ( 10 bars for threaded type ) Specifications : 3 pieces type Double FPM

More information

DN 3/8" to 4" Female BSP - 10 C C Max Pressure : 25 Bars up to DN 1 Specifications : All positions Female / Female BSP Brass / S.S.

DN 3/8 to 4 Female BSP - 10 C C Max Pressure : 25 Bars up to DN 1 Specifications : All positions Female / Female BSP Brass / S.S. Size : Ends : Min Temperature : Max Temperature : DN 3/8" to 4" Female BSP - 10 C + 100 C Max Pressure : 25 Bars up to DN 1 Specifications : All positions Female / Female BSP Brass / S.S. throttle Materials

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 300 Between flanges PN10/16 and ISO PN20 ANSI150-10 C + 80 C Max Pressure : 16 Bars Specifications : Long neck for isolation Stainless steel

More information

Materials : Ductile iron body EN GJS 500-7

Materials : Ductile iron body EN GJS 500-7 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 130 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation

More information

DN 1/4" to 2" Threaded Female BSP -10 C C Max Pressure : Bars Specifications : Reduced bore High pressure Hydraulic type

DN 1/4 to 2 Threaded Female BSP -10 C C Max Pressure : Bars Specifications : Reduced bore High pressure Hydraulic type Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2" Threaded Female BSP -10 C + 100 C Max Pressure : 315 500 Bars Specifications : Reduced bore High pressure Hydraulic type Materials : Galvanized

More information

Materials : Carbon steel or Stainless steel

Materials : Carbon steel or Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges PN10/16-10 C +80 C in NBR, 110 C in EPDM, 180 C in FKM Max Pressure : 16 Bars up to DN200 ( 10 bars over ) Specifications

More information

DN 3/8" to 4" Female BSP - 10 C C Max Pressure : 25 Bars Specifications : All positions Female / Female Brass throttle

DN 3/8 to 4 Female BSP - 10 C C Max Pressure : 25 Bars Specifications : All positions Female / Female Brass throttle Size : Ends : Min Temperature : Max Temperature : DN 3/8" to 4" Female BSP - 10 C + 100 C Max Pressure : 25 Bars Specifications : All positions Female / Female Brass throttle Materials : Brass body CW617N

More information

LUG BUTTERFLY VALVE PN10/16

LUG BUTTERFLY VALVE PN10/16 LUG BUTTERFLY VALVE PN10/16 Model/Ref: 1133 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges ISO PN10/16-10 C + 110 C ( 130 C C temporarily) Max

More information

Materials : Carbon steel ASTM A216 WCB

Materials : Carbon steel ASTM A216 WCB Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 300 Flanged R.F. PN25/40-29 C + 425 C Max Pressure : 40 Bars Specifications : Stainless steel removable filter Bolted bonnet

More information

DN 1/4" to 4 Female-Female BSP - 10 C C Max Pressure : 16 Bars Specifications : Disc check valve All positions Short length

DN 1/4 to 4 Female-Female BSP - 10 C C Max Pressure : 16 Bars Specifications : Disc check valve All positions Short length Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4 Female-Female BSP - 10 C + 150 C Max Pressure : 16 Bars Specifications : Disc check valve All positions Short length Materials : Stainless

More information

2 PIECES BALL VALVE PN63

2 PIECES BALL VALVE PN63 2 PIECES BALL VALVE PN63 Model/Ref: 220 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges ISO PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200

More information

Size : Ends : Min Temperature : Max Temperature : Materials : PVC-U body

Size : Ends : Min Temperature : Max Temperature : Materials : PVC-U body Size : Ends : Min Temperature : Max Temperature : DN 65 to 200 mm Between flanges PN10/16 0 C + 40 C Max Pressure : 10 Bars up to DN125 Specifications : 7 positions lever Wafer type ISO 5211 mounting pad

More information

*the installation defects and wear defects are not covered by the guarantee

*the installation defects and wear defects are not covered by the guarantee Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation

More information

Materials : Ductile iron EN GJS body, PTFE seat

Materials : Ductile iron EN GJS body, PTFE seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 300 mm Between flanges PN10/16 and Class 150 (PN20) - 25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long

More information

Materials : ASTM A351 CF8M body

Materials : ASTM A351 CF8M body Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation

More information

Size : Ends : Min Temperature : Max Temperature : MADE OF STAINLESS... MADE OF STAINLESS...

Size : Ends : Min Temperature : Max Temperature : MADE OF STAINLESS... MADE OF STAINLESS... MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long

More information

MADE OF STAINLESS... Certificate 3.1

MADE OF STAINLESS... Certificate 3.1 MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1200 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 110 C ( 130 C temporarily ) Max Pressure

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1 Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars

More information

Materials : Carbon steel or stainless steel

Materials : Carbon steel or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 or PN16 flanges 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO

More information

DN 3/8" Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank

DN 3/8 Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank ISO 9001-2008 Size : Ends : Min Temperature : Max Temperature : DN 3/8" Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank Materials : Brass Page 1 sur 10 SPECIFICATIONS

More information

Materials : Ductile iron EN GJS 500-7, PTFE seat

Materials : Ductile iron EN GJS 500-7, PTFE seat Seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 300 mm Between flanges PN10/16-25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long neck for isolation Lug

More information

DN 1/2" to 2" Female Female BSP + 5 C + 90 C Max Pressure : 10 Bars Specifications : Cap 1/4 Controlable Low head loss

DN 1/2 to 2 Female Female BSP + 5 C + 90 C Max Pressure : 10 Bars Specifications : Cap 1/4 Controlable Low head loss Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2" Female Female BSP + 5 C + 90 C Max Pressure : 10 Bars Specifications : Cap 1/4 Controlable Low head loss Materials : Brass body *the installation

More information

Materials : Carbon steel or Stainless steel

Materials : Carbon steel or Stainless steel Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges PN10/16-10 C +80 C in NBR, 110 C in EPDM, 180 C in FKM Max Pressure : 16 Bars up to DN200 ( 10 bars over )

More information

MADE OF STAINLESS... Certificate 3.1

MADE OF STAINLESS... Certificate 3.1 MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for ) + 90 C for NBR seat ( + 110 C for ) Max Pressure

More information

Size : Ends : Min Temperature : Max Temperature : Reinforced lug from DN200 to DN1400 MADE OF STAINLESS...

Size : Ends : Min Temperature : Max Temperature : Reinforced lug from DN200 to DN1400 MADE OF STAINLESS... MADE OF STAINLESS... Reinforced lug from DN200 to DN1400 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16-10 C ( with EPDM seat ) + 110 C ( with EPDM seat ) Max

More information

Materials : Cast iron body

Materials : Cast iron body Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanged GN10/16-10 C + 100 C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball Iso 5211mounting pad Materials : Cast

More information

DN 1/2" to 4" Female BSP + 0 C + 65 C Max Pressure : 16 Bars ( up to DN 1 ) Specifications : All positions Stainless steel strainer Nylon throttle

DN 1/2 to 4 Female BSP + 0 C + 65 C Max Pressure : 16 Bars ( up to DN 1 ) Specifications : All positions Stainless steel strainer Nylon throttle Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 4" Female BSP + 0 C + 65 C Max Pressure : 16 Bars ( up to DN 1 ) Specifications : All positions Stainless steel strainer Nylon throttle Materials

More information

MADE OF STAINLESS...

MADE OF STAINLESS... MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanged R.F. PN25/40-29 C + 425 C Max Pressure : 40 Bars Specifications : Stainless steel removable filter Bolted

More information

DN 1/4 to 4 Threaded BSP or NPT - 20 C C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore

DN 1/4 to 4 Threaded BSP or NPT - 20 C C Max Pressure : 63 Bars ( up to DN 3/4 ) Specifications : Anti blow-out stem Locking device Full bore Size : Ends : Min Temperature : Max Temperature : DN 1/4 to 4 Threaded BSP or NPT - 20 C + 180 C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore Materials

More information

Materials : Ductile iron body EN GJS, carboxylic NBR seat

Materials : Ductile iron body EN GJS, carboxylic NBR seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 90 C Max Pressure : 16 Bars Specifications : Long neck for isolation

More information

Ref ALL POSITIONS CAST IRON CHECK VALVE PN16. Model/Ref:

Ref ALL POSITIONS CAST IRON CHECK VALVE PN16. Model/Ref: Model/Ref: 363-366 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. ISO PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications

More information

Materials : Ductile iron EN GJS body

Materials : Ductile iron EN GJS body Reinforced lug for DN200 : Size : Ends : Min Temperature : Max Temperature : DN 40 to 200 mm Between PN10/16 flanges ( PN10 for DN200) - 20 C + 60 C Max Pressure : 5 Bars Specifications : Long neck for

More information

MADE OF STAINLESS...

MADE OF STAINLESS... MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and ISO PN20 ANSI150-10 C (with EPDM seat ) + 110 C ( with EPDM seat ) Max Pressure : 16

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron EN GJS body

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron EN GJS body Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges GN10/16 and ASA150-10 C (with EPDM seat ) + 90 C ( with EPDM seat, temporarily 110 C ) Max Pressure : 16 Bars up to DN200

More information

MADE OF STAINLESS...

MADE OF STAINLESS... MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm ( NPS 2" to 24" ) Between Class 150 (PN20) flanges 29 C + 210 C Max Pressure : 20 Bars Specifications : Double eccentric

More information

Materials : Carbon steel or stainless steel

Materials : Carbon steel or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 50 to 350 mm Between flanges GN 25-20 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to API 607 Iso

More information

PRODUCE EVOLUTION. Be careful, our valves Ref.789 are changing

PRODUCE EVOLUTION. Be careful, our valves Ref.789 are changing PRODUCE EVOLUTION Be careful, our valves Ref.789 are changing We currently have 2 different types available (according to DN) with different dimensions Marking old type : Marking new Type : At the end,

More information

DN 15 to DN 200 PN10/16 Flanges -10 C C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball ISO 5211 mounting pad

DN 15 to DN 200 PN10/16 Flanges -10 C C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball ISO 5211 mounting pad Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN10/16 Flanges -10 C + 200 C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball ISO 5211 mounting pad Materials :

More information

DN 1/2" to 4" Female BSP + 0 C + 65 C Max Pressure : 16 Bars ( up to DN 1 ) Specifications : All positions Stainless steel strainer Nylon throttle

DN 1/2 to 4 Female BSP + 0 C + 65 C Max Pressure : 16 Bars ( up to DN 1 ) Specifications : All positions Stainless steel strainer Nylon throttle Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 4" Female BSP + 0 C + 65 C Max Pressure : 16 Bars ( up to DN 1 ) Specifications : All positions Stainless steel strainer Nylon throttle Materials

More information

346 REF. 346 NO POLLUTION CHECK VALVE EA 577 NOREPOL PN16 NO POLLUTION CHECK VALVE EA 577 NOREPOL PN16

346 REF. 346 NO POLLUTION CHECK VALVE EA 577 NOREPOL PN16 NO POLLUTION CHECK VALVE EA 577 NOREPOL PN16 Model/Ref: 346 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to 150 ISO PN10/16 R.F. flanges + 10 C + 60 C ( +90 C for return circuit ) Max Pressure : 16 Bars Specifications

More information

MADE OF STAINLESS... Certificate 3.1

MADE OF STAINLESS... Certificate 3.1 MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Rising rotating

More information

Materials : Carbon steel ASTM A216 WCB

Materials : Carbon steel ASTM A216 WCB Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanges R.F. PN40-20 C + 400 C Max Pressure : 40 Bars Specifications : Rising stem and handwheel Bolted bonnet and gland

More information

Materials : Carbon steel or stainless steel

Materials : Carbon steel or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497

More information

Materials : Lead free brass CW510L body (CuZn42)

Materials : Lead free brass CW510L body (CuZn42) Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore Materials : Lead free brass

More information

DN 40 to DN 150 ISO PN10/16 flanges -10 C C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball ISO 5211 mounting pad

DN 40 to DN 150 ISO PN10/16 flanges -10 C C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball ISO 5211 mounting pad Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 150 ISO PN10/16 flanges -10 C + 200 C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball ISO 5211 mounting pad Materials

More information

Materials : Cast iron body EN GJS 500-7

Materials : Cast iron body EN GJS 500-7 Size : Ends : Min Temperature : Max Temperature : DN 32 to 300 mm Between flanges GN10/16 and ISO PN20 ANSI150-10 C + 90 C Max Pressure : 16 Bars Specifications : Long neck for isolation Wafer type Full

More information

2 PIECES BALL VALVE PN63

2 PIECES BALL VALVE PN63 2 PIECES BALL VALVE PN63 Model/Ref: 176 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN

More information

Ref PTFE WAFER BUTTERFLY VALVE. Model/Ref:

Ref PTFE WAFER BUTTERFLY VALVE.  Model/Ref: Model/Ref: 1155 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 300 mm Between flanges PN10/16 and ISO PN20 ANSI150-25 C + 200 C Max Pressure : 16 Bars up to DN150

More information

Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Materials : Cast iron body

Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Materials : Cast iron body Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 40 to DN 300 Between ISO PN10/16 flanges -10 C + 110 C ( 130 C temporarily ) 16 Bars Long neck for isolation Cast iron

More information

Materials : Ductile iron body EN GJS 500-7

Materials : Ductile iron body EN GJS 500-7 Size : Ends : Min Temperature : Max Temperature : DN 32 to 300 mm Between flanges PN10/16 and ISO PN20 ANSI150-10 C + 80 C Max Pressure : 16 Bars up to DN200 Specifications : Long neck for isolation Wafer

More information

PRODUCE EVOLUTION. Be careful, our valves Ref are changing

PRODUCE EVOLUTION. Be careful, our valves Ref are changing ATEX DIN M3 PRODUCE EVOLUTION Be careful, our valves Ref.704-706 are changing We currently have 2 different types available (according to DN) with different dimensions and ATEX certification for the new

More information

Materials : Ductile iron EN GJS body, NBR Gas seat

Materials : Ductile iron EN GJS body, NBR Gas seat Reinforced lug for DN200 : Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 200 mm Between PN10/16 flanges ( PN10 for DN200) - 20 C + 60 C Max Pressure : 5 Bars Specifications

More information

DN 1/4" to 2 Female - Female BSP - 10 C C Max Pressure : 25 Bars Specifications : Union cap Stainless steel seat PTFE or Stainless steel disc

DN 1/4 to 2 Female - Female BSP - 10 C C Max Pressure : 25 Bars Specifications : Union cap Stainless steel seat PTFE or Stainless steel disc Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2 Female - Female BSP - 10 C + 180 C Max Pressure : 25 Bars Specifications : Union cap Stainless steel seat PTFE or Stainless steel disc Materials

More information

PRODUCT EVOLUTION. Be careful, our valves Ref.705 are changing

PRODUCT EVOLUTION. Be careful, our valves Ref.705 are changing ATEX DIN M3 PRODUCT EVOLUTION Be careful, our valves Ref.705 are changing We currently have 2 different types available (according to DN) with different dimensions and ATEX certification for the new type

More information

Ref WAFER BUTTERFLY VALVE. Model/Ref:

Ref WAFER BUTTERFLY VALVE.  Model/Ref: Ref. 1150-1158 WAFER BUTTERFLY VALVE Model/Ref: 1150-1158 www.lauridsenindustri.com Ref. 1150-1158 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and ISO PN20

More information

Ref LUG BUTTERFLY VALVE. Model/Ref:

Ref LUG BUTTERFLY VALVE.   Model/Ref: LUG BUTTERFLY VALVE Model/Ref: 1160 1168 Reinforced lug from DN200 to DN1400 : www.lauridsenindustri.com Reinforced lug from DN200 to DN1400 : Size : Ends : Min Temperature : Max Temperature : DN 32 to

More information

Materials : Carbon steel or Stainless steel

Materials : Carbon steel or Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 15 to 100 mm Flanges R.F. PN40-20 C + 180 C Max Pressure : 40 Bars Specifications : 3 pieces type PTFE filled with 15% glass fiber seat Anti blow-out

More information

PRODUCT EVOLUTION. Be careful, our valves Ref.730 are changing

PRODUCT EVOLUTION. Be careful, our valves Ref.730 are changing PRODUCT EVOLUTION Be careful, our valves Ref.730 are changing We currently have 2 different types available (according to DN) with different dimensions (but same face to face) and non-commutable gaskets

More information

MADE OF STAINLESS...

MADE OF STAINLESS... MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211

More information

DN 1/4" to 4 Female - Female BSP -10 C + 80 C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore

DN 1/4 to 4 Female - Female BSP -10 C + 80 C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4 Female - Female BSP -10 C + 80 C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore Materials :

More information

Materials : Cast iron or Stainless steel

Materials : Cast iron or Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 700 Between flanges GN10-10 C for cast iron type ( -15 C for S.S. ) + 80 C for cast iron type ( + 110 C for S.S. ) Max Pressure : 10 Bars up

More information

Ref Model/Ref: METAL/METAL WAFER BUTTERFLY VALVE ( NO TIGHTNESS )

Ref Model/Ref: METAL/METAL WAFER BUTTERFLY VALVE ( NO TIGHTNESS ) Model/Ref: 1111-1112 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to 1400 mm Between flanges PN10/16 and ISO PN20 ANSI150-20 C for carbon steel and -30 C for S.S. type

More information

WAFER BUTTERFLY VALVE

WAFER BUTTERFLY VALVE WAFER BUTTERFLY VALVE model 1123 Size: DN 32/40 to DN 1200 Ends: Between flanges PN 10/16, Class 150 up to DN 600 Min Temperature: -10 C Max temperature: +110 C (130 C temporarily) Max pressure: 16 Bars

More information

Materials : Carbon steel ASTM A216 WCB

Materials : Carbon steel ASTM A216 WCB Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2 to 16 ) Flanges R.F. Class 300 (PN50) - 29 C + 425 C Max Pressure : 50 Bars Specifications : Swing check valve

More information

DN 15 to DN100 Between flanges PN40-30 C C Max Pressure : 40 Bars Specifications : Spring type All positions Metal / metal

DN 15 to DN100 Between flanges PN40-30 C C Max Pressure : 40 Bars Specifications : Spring type All positions Metal / metal Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to DN100 Between flanges PN40-30 C + 300 C Max Pressure : 40 Bars Specifications : Spring type All positions Metal / metal Materials

More information

Materials : Forged carbon steel or stainless steel

Materials : Forged carbon steel or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire

More information

Materials : Carbon steel

Materials : Carbon steel Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2 to 16 ) Flanges R.F. Class 300 (PN50) - 29 C + 425 C Max Pressure : 50 Bars Specifications : Swing check valve Bolted bonnet Vertical

More information

Materials : Carbon steel or Stainless steel

Materials : Carbon steel or Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 15 to 250 mm Between flanges PN16/40-28 C + 200 C Max Pressure : 40 Bars up to DN80, 16 bars over Specifications : With ISO 5211 mounting pad Contents

More information

MADE OF STAINLESS...

MADE OF STAINLESS... MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 300 mm PN16/40 R.F. Flanges -50 C in SS and -20 C in carbon steel + 230 C Max Pressure : 40 Bars up to DN50, 16 Bars over

More information

DN 1/4" to 2 Female - Female BSP - 10 C C Max Pressure : 25 Bars Specifications : Union cap Stainless steel seat PTFE or Stainless steel disc

DN 1/4 to 2 Female - Female BSP - 10 C C Max Pressure : 25 Bars Specifications : Union cap Stainless steel seat PTFE or Stainless steel disc Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2 Female - Female BSP - 10 C + 180 C Max Pressure : 25 Bars Specifications : Union cap Stainless steel seat PTFE or Stainless steel disc Materials

More information

AKZG50E4SGL. Materials : Ductile iron EN GJS 500-7, food silicone seat. *the installation defects and wear defects are not covered by the guarantee

AKZG50E4SGL. Materials : Ductile iron EN GJS 500-7, food silicone seat. *the installation defects and wear defects are not covered by the guarantee AKZG50E4SGL Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications

More information

Materials : Stainless steel ASTM A351 CF8M

Materials : Stainless steel ASTM A351 CF8M Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : Max Pressure : 40 Bars Specifications : Spring type All positions Metal / metal DN 15 to DN200 Between flanges PN10/16/25/40 and Class

More information

MADE OF STAINLESS...

MADE OF STAINLESS... MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Class 150 (PN20) R.F. Flanges -50 C in SS and -29 C in carbon steel + 230 C Max Pressure : 20 Bars

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel

Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Carbon or stainless steel

Size : Ends : Min Temperature : Max Temperature : Materials : Carbon or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking

More information

Stainless steel ASTM A351 CF8M

Stainless steel ASTM A351 CF8M MADE OF STAINLESS... Certificate 3.1 Size : Connection end : Min Temperature : Max Temperature : DN 25 to 150 Flanges PN16 R.F. - 30 C + 150 C Max Pressure : 16 Bars Specifications : ISO mounting pad filled

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Carbon steel

Size : Ends : Min Temperature : Max Temperature : Materials : Carbon steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking

More information

Materials : Forged carbon steel or stainless steel

Materials : Forged carbon steel or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2

More information

Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1

Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1 Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled

More information