Saddle valves KH210GR - KH230GR

Size: px
Start display at page:

Download "Saddle valves KH210GR - KH230GR"

Transcription

1 Saddle valves KH210GR - KH230GR

2 Manufacturer: Keulahütte GmbH Geschwister-Scholl-Str Krauschwitz GERMANY Production and distribution of tapping valves: Tapping valves according to DIN 3543 with nominal sizes DN80-DN500 for Steel / cast iron / AZ / FZ pipes Media: Drinking water, industrial water Gas Contents: 0. Disposition 1 Product description Tapping valves 1.1 Design 1.2 Constructive parameters Housing Valve insert Operating shut-off 1.3 Clamps systems 1.4 Function 2 Maintenance and Installation manual 2.1 Mounting 2.2 Maintenance 3. Physiological safety for non-metallic installation components 4 Liist of applicable standards for the tapping valves 5. Assembly drawing / Materials

3 1 Product description Tapping valves 1.1 Design The tapping valves fabricated at Keulahütte GmbH should be used in conjunction with the appropriate elastomer for the fields of drinking water and gas. The operation is effected manually. The tapping process is performed with external tapping units and auxiliary valves. The series KH200 is available in different versions: KH200GR Clamp (1) without angle valve, with internal thread G¾ tog2 and external thread G2 2/1 KH210GR Complete cast clamp (1) with 2"outlet for APU tapping system KH220GR Clamp KH200GR (1) with brass angle valve with the outlets 11/4, 11/2, 2 KH221G as KH220GR but with the possibility of continuous rotation by 360 in 11/4 and 11/2 KH230GR Angle valve with integrated auxiliary shut-off ball with 11/2 outlet The actuation of the tapping valves is performed with the slider valve key C according to DIN 3223 on the mounting set. 1.2 Constructive parameters Housing There are two options available for the housing It can be supplied complete with cast valve insert or as cast clamp with brass angle valve. The cast housing for KH210GR KH230GR is supplied in complete epoxy resin powder coating with a layer thickness of at least 250 μm For the tapping valves KH200GR, KH220GR, KH221GR and KH230GR, the cast clamp (1) is completely epoxy powder coated. The angle valve is made of brass or red brass and therefore requires no coating Valve insert The end cover (2) is a component formed by the parts 2.1 to 2.9 (see the parts list). A sliding disc (2.9) between the upper part (2.10) and the spindle (2.1) ensures low operating torques. The 6KT on the spindle (2.1) ensures an optimal torque transmission to the tappet (2.2).

4 1.2.3 Operating shut-off In the operation at the shut-off tappet (2.2) it is about a PTFE gasket (2.8) which is pressed for sealing against the sealing surface in the angle valve or in the housing. In order to use in the cast housing KH210GR an optimal sealing surface, a seat ring (3) is pressed in the housing (1), on which the PTFE gasket (2.8) makes the sealing. 1.3 Clamps systems For the tapping valves KH200GR to KH230GR various brackets variants are available. a) flexible stainless steel bracket for the Great-Range System (GR) system, a bracket per nominal width and type of pipe b) Bracket GR220: flexible wide area bracket A stainless steel bracket per nominal width for multiple pipe types 1.4 Function The tapping valves are operated in the OPEN-SHUT mode with the key C on the mounting set. Intermediate positions to make a regulation are not admitted. By pressing the mounting set that is tension-resistant connected to spindle (2.1), the spindle (2.1) and thus also the tappet is actuated (2.2). By turning counterclockwise, the tapping valve is opened (the tappet moves upward), and by turning it clockwise the valve closed (the tappet moves moves downwards). DN PN possible outlets /4", 11/2", 2" /4", 11/2", 2" /4", 11/2", 2" /4", 11/2", 2" /4", 11/2", 2" /4", 11/2", 2" /4", 11/2", 2" /4", 11/2", 2" /4", 11/2", 2" /4", 11/2", 2" /4", 11/2", 2" /4", 11/2", 2" /4", 11/2", 2" The open position is limited by end stop of the tappet (2.2) on the upper part (2.10). The closed position is limited by the sealing seat in the angle valve or by the seat ring in the cast housings. When closing / opening the valve, a torque of 100Nm should not be exceed.

5 2 Maintenance and Installation manual 2.1 Mounting During the installation, after removal of the cap, attention should be paid to the cleanliness of the connection points and to ensure a tension-free mounting of the clamp (1) on the pipe. No damage to the pipe surface must exist on the area surrounding the tapping. If there are deep scratches, the drilling place must be shifted. After the straight placing of the fitting on the pipe, the bracket can be mounted and hand-tightened. It is important to ensure that the bracket gasket (4) is seated in its groove and does not slip out. Then tighten the nuts of the bracket evenly, alternately. The maximum tightening torque is 80Nm. The valve is tight already at much lower torques. Check the tightness of the clamp (1) around the outlet and on the pipe and tighten the nuts if necessary. When drilling the fittings, the instructions of the drilling device should be observed. 2.2 Maintenance The tapping valves are maintenance-free 3. Physiological safety for non-metallic installation components The declarations of harmlessness for the non-metallic parts used are available: - Rubber seals, O-rings (2.6, 2.7, 4) - PTFE gasket (2.8) - coated with epoxy resin powder coating (ESR) List of applicable standards for the tapping valves DIN EN 3543 DIN EN DIN EN DIN EN DIN EN Tapping valves Valves for water supply Part 1 - General Requirements Valves for water supply Part 2 - Shut-off valves Valves Part 3 - Cast iron, that is specified in the European standards Elastomer Sealings Part 1 - Vulcanized rubber

6 DIN EN ISO 9001 DIN 3223 DIN Quality Management Systems Actuating keys Testing

7 5. Assembly drawing / Materials KH210GR Pos. Designation Material 1 Clamp GGG 2 Valve core 2.1 Spindle Stainless steel 2.2 Tappet Brass 2.3 Nut Brass 2.4 Break ring Stainless steel 2.5 Wiper ring NBR 2.6 O-ring 13x2,6 EPDM 2.7 O-ring 48x2 EPDM 2.8 Gasket PTFE 2.9 Sliding disc Brass 2.11 Gasket PTFE 3 Seat ring Brass 4 O-ring 75x10 EPDM 5 Bracket GGG 6 Disc A17 Stainless steel 7 Hinged block GGG 8 Disc A17 Stainless steel

8 KH220GR Pos. Designation Material 1 Clamp GGG 2 Valve core 2.1 Spindle Stainless steel 2.2 Tappet Brass 2.3 Nut Brass 2.4 Break ring Stainless steel 2.5 Wiper ring NBR 2.6 O-ring 13x2,6 EPDM 2.7 O-ring 48x2 EPDM 2.8 Gasket PTFE 2.9 Sliding disc Brass 2.10 Upper part Brass 2.11 Gasket PTFE 3 Angle valve Brass 4 GR-gasket Stainless steel / EPDM 5 Nut M16 6 Bracket GR210 Stainless steel 7 Hinged block GGG 8 Disc A17 Stainless steel

Operating manual Keula gate valves DN PN10/16

Operating manual Keula gate valves DN PN10/16 Operating manual Keula gate valves DN40-400 PN10/16 Page - 1 Manufacturer: Keulahütte GmbH Geschwister-Scholl-Str. 15 02957 Krauschwitz GERMANY Manufacture and sale of the slide valves: Slide valves according

More information

Butterfly valves. Introduction. Made of ductile cast iron

Butterfly valves. Introduction. Made of ductile cast iron Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international

More information

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of

More information

Swing Check Valves - Series 41

Swing Check Valves - Series 41 Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.

More information

General information Gate valves

General information Gate valves General information Gate valves In 1957, Hawle invented the resilient-seated gate valve with multiple O-ring sealing of the valve spindle and had it patented. Today, this type of gate valve is the standard

More information

BUTTERFLY VALVE 17 SERIES Gearbox

BUTTERFLY VALVE 17 SERIES Gearbox DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

More information

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1 SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators

More information

PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3

PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve

More information

Cast Iron Valves. Product Information. It s all at Albion

Cast Iron Valves. Product Information. It s all at Albion Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS

More information

HELYON PRESSURE REDUCING VALVE MODEL M1

HELYON PRESSURE REDUCING VALVE MODEL M1 PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,

More information

Tilting-disc Check Valves Short Body

Tilting-disc Check Valves Short Body Tilting-disc Check Valves Short Body Tilting-disc Check Valves, Short Body to DIN 3202 Series F4 for liquids and gases, PN 10 - PN 40, DN 150 - DN 2000 Short Body Tilting-disc Check Valves More than 40

More information

KNIFE GATE VALVE Product Ref. : KG02W/KG02L

KNIFE GATE VALVE Product Ref. : KG02W/KG02L General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective

More information

HAWLE-specification water

HAWLE-specification water water GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN HAWLE - Epoxy Powder-Coating High quality corrosion

More information

Keystone Figure 990 and 920 Resilient Seated Butterfly Valves

Keystone Figure 990 and 920 Resilient Seated Butterfly Valves A split body thin disc valve for high flow and modulating service Figure 990 - Wafer body design Figure 920 - Lugged body design Features General application Figure 990 and 920 valves are used when modulating

More information

KLINGER Monoball One-Piece ball valves

KLINGER Monoball One-Piece ball valves KLINGER Monoball One-Piece ball valves Edition 02 KLINGER Monoball Fully welded end ball valves High demands Pre-insulated pipeline systems as used e..g. in district heating and waste water networks, are

More information

Pneumatic Butterfly Valve Type 3335 / AT

Pneumatic Butterfly Valve Type 3335 / AT Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN

More information

ERHARD is a company of. Datasheet ERHARD ERK tilting-disc check valve

ERHARD is a company of. Datasheet ERHARD ERK tilting-disc check valve ERHARD is a company of Datasheet ERHARD ERK tilting-disc check valve The universal check valve with double excentric valve disc A key component of the is the valve disc which has a freely oscillating,

More information

Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange

Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange No Component Material 1 Body Ductile iron GGG40 2 Wedge DI Fully Vulcanised EPDM 3 Wedge Nut Brass 4 Stem SS420 5 Bolt Q235+Zinc 6 Gasket EPDM

More information

ISO-DE Double Eccentric Butterfly Valves

ISO-DE Double Eccentric Butterfly Valves ISO-DE Double Eccentric Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com

More information

Series 42 Self-operated Regulators. Type RS Check Valve (backflow protection)

Series 42 Self-operated Regulators. Type RS Check Valve (backflow protection) Series 42 Self-operated Regulators Type 42-10 RS Check Valve (backflow protection) Application Designed to protect nitrogen and compressed air networks against backflow from directly connected systems.

More information

RESILIENT SEATED GATE VALVE FAF 6200

RESILIENT SEATED GATE VALVE FAF 6200 PRODUCTION STANDARTS DN40 DN800 PN 10-16 Design EN 1171 / EN 1074 Connection Face to Face EN 1092-2 / ISO 7005-2 - Flanged EN 558 Series 15 / DIN 3202 F5 Marking EN 19 Tests EN 12266-1 Corrosion Protection

More information

Globe Valve, Metal. Sectional drawing

Globe Valve, Metal. Sectional drawing Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the

More information

The HYDROMAT. Technical Information Since The HYDROMATEN KG is a company of the Tröger + Entenmann corporate group, Heidelberg

The HYDROMAT. Technical Information Since The HYDROMATEN KG is a company of the Tröger + Entenmann corporate group, Heidelberg The HYDROMAT Technical Information Since 1953 The HYDROMATEN KG is a company of the Tröger + Entenmann corporate group, Heidelberg Product overview + Supply capability Nominal diameters Nominal pressure

More information

Hawle Haku PE Pipe Saddle

Hawle Haku PE Pipe Saddle Hawle Haku PE Pipe Saddle Scan for more information Technical Guide W9.1 Specifically designed as a PE mechanical connection solution. Suitable for PE pipes of all pressure ratings up to PN 16. DN40-360.

More information

HS10S-FA. Water station. Product specification sheet

HS10S-FA. Water station. Product specification sheet HS10S-FA Water station Product specification sheet Range of Application Medium Drinking water Inlet pressure Max. 16 bar Outlet pressure 1.5-6.5 bar Installation position Horizontal with filter bowl downwards

More information

Maintenance-free metallic seat shut-off globe valves

Maintenance-free metallic seat shut-off globe valves Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16

More information

BUTTERFLY VALVE - WAFER FAF 3500

BUTTERFLY VALVE - WAFER FAF 3500 PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic

More information

HS10S-FA. Water station. Product specification sheet

HS10S-FA. Water station. Product specification sheet HS10S-FA Water station Product specification sheet Range of Application Medium Drinking water Inlet pressure Max. 16 bar Outlet pressure 1.5-6.5 bar Installation position Horizontal with filter bowl downwards

More information

Self-operated Pressure Regulators Type Universal Excess Pressure Valve

Self-operated Pressure Regulators Type Universal Excess Pressure Valve Self-operated Pressure Regulators Type 41-73 Universal Excess Pressure Valve Application Pressure regulators for set points from 0.05 to 8 bar Valve nominal sizes DN 15 to 100 Nominal pressure PN 16 to

More information

Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a

Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN

More information

Examples 3/2-way valve A T NO: Symbol

Examples 3/2-way valve A T NO: Symbol 1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.

More information

These PFA and PTFE lined products offer a reliable solution in hazardous applications

These PFA and PTFE lined products offer a reliable solution in hazardous applications These PFA and PTFE lined products offer a reliable solution in hazardous applications Features Check valves Heavy duty body in ductile iron GGG4.3 (ASTM A-395). Heavy duty PFA or PTFE lining. Borosilicate

More information

ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901

ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901 ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2

More information

Control shut-off butterfly valves DN 25 DN 200 PN

Control shut-off butterfly valves DN 25 DN 200 PN Control shut-off butterfly valves DN 25 DN 200 4.1.1. Features HVAC, sanitary and raw water plants as shut-off element for water -10...+110 C Leakage rate: tight sealing Control and shutt-off butterfly

More information

The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications.

The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Butterfly Valve ParaSeal range The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Features The field replaceable seat fully

More information

Uniwat. Resilient Seated Gate Valves

Uniwat. Resilient Seated Gate Valves Uniwat Resilient Seated Gate Valves www.comeval.es Resilent Seated Gate Valves - UNIWAT 504/507 Copyright COMEVAL VALVE SYSTEMS - Data subject to revision - Regularly updated data on www.comeval.es - DS01

More information

ERHARD is a company of. Datasheet ERHARD ABS Premium service valve

ERHARD is a company of. Datasheet ERHARD ABS Premium service valve ERHARD is a company of Datasheet ERHARD ABS Premium service valve ERHARD ABS Premium service valve The innovative tapping systems With the new it has been possible to reduce the number of required models

More information

Series 240 Type 3351 Pneumatic On/off Valve

Series 240 Type 3351 Pneumatic On/off Valve Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating

More information

Maintenance-free metallic seat shut-off globe valves

Maintenance-free metallic seat shut-off globe valves Type leaflet 7150.1-10 BOA-H R Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN

More information

Self-operated Pressure Regulators Type Universal Pressure Reducing Valve

Self-operated Pressure Regulators Type Universal Pressure Reducing Valve Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN

More information

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle. Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing

More information

VALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67

VALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67 VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control

More information

Manual valves. automatic meters and valves

Manual valves. automatic meters and valves Manual valves automatic meters and valves Butterfly valves manual valves Advanced technical design 1. Robust and lightweight leverage system. Ergonomic design. Protection of gear mechanism.. Flange fitting

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

Butterfly valve Series K

Butterfly valve Series K P R O C E S S T E C H N I K G M B H Centrally mounted butterfly valve PTFE lined Type KG 6 KG 8 K 16 K 18 two-piece body GEFA-MULTITOP Automation system Exchangeable flange for direct installation Unsurpassed

More information

Installation Operation Maintenance

Installation Operation Maintenance Installation Operation Maintenance www.challengervalves.com.au 1 QAD#IM1015 REVC 3.10.15 Index 1. INTRODUCTION 3 1.1 Design Features 1.2 Flange and Pipe Compatibility 3 1.3 Operating Pressures and Temperatures

More information

VBF21.. Three-port slipper valves PN6. Series 02: DN40 and DN50 Series 01: DN

VBF21.. Three-port slipper valves PN6. Series 02: DN40 and DN50 Series 01: DN 4 24 Series 02: DN40 and DN50 Series 0: DN 65...50 Three-port slipper valves PN6 VBF2.. Three-port slipper valves, PN6, flanged Grey cast iron EN-GJL-250 DN 40...50 k vs 25...820 m 3 /h Angle of rotation

More information

Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units

Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate

More information

Mounting and Operating Instructions EB 5868/5869 EN

Mounting and Operating Instructions EB 5868/5869 EN Electric Control Valves Types 3213/5857, 3213/5824, Types 3214/5824, 3214/3374, 3214/3274 with safety function: Types 3213/5825, 3214/5825, 3214/3374, 3214/3274 Pneumatic Control Valves Types 3213/2780-1,

More information

APPENDIX: TECHNICAL INFORMATION

APPENDIX: TECHNICAL INFORMATION Materials Test and Operation Specifications Quality Assurance MATERIALS: Cast Iron Grey iron GD-250 GG-25 to DIN 1691-1964 Grade 220/250 minimum to BS 1452-1990 Class 35B/40B to ASTM-A48-1974 250-200 -

More information

Butterfly Valve APORIS 16. DN PS 16 bar. Type Series Booklet

Butterfly Valve APORIS 16. DN PS 16 bar. Type Series Booklet Butterfly Valve APORIS 16 DN 300-2000 PS 16 bar Type Series Booklet Legal information/copyright Type Series Booklet APORIS 16 All rights reserved. The contents provided herein must neither be distributed,

More information

Technische Dokumentation Technical Documentation

Technische Dokumentation Technical Documentation Technische Dokumentation Technical Documentation XOMOX Fully Lined Check Valves Dok. Nr.: tdb_check_gb XOMOX International GmbH & Co. Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008 Table

More information

Datasheet ERHARD ECLI butterfly valve

Datasheet ERHARD ECLI butterfly valve Datasheet ERHARD ECLI butterfly valve Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial applications: One of these is the gate valve, which was developed

More information

Technical Manual. Register 12 CONTENTS - AKH2.2

Technical Manual. Register 12 CONTENTS - AKH2.2 Page: 1 Contents Register 12 CONTENTS - AKH2.2 Page Technical Data AKH2.2-DIN... 2 Technical Data AKH2.2-ANSI... 3 Material Specification AKH2.2... 4 Dimensions AKH2.2-DIN... 5 Dimensions AKH2.2-ANSI...

More information

TABLE OF CONTENT. 7-Operating mechanisms of Non-return valve with hydraulic damping cylinder

TABLE OF CONTENT. 7-Operating mechanisms of Non-return valve with hydraulic damping cylinder TABLE OF CONTENT Title 1- Tilting-Disc Non-Return valves with counter weight (NVTW) 2-Parts list 3-Installation Non-return valve and Butterfly Valve 4-Dimensions 5-Installation of Non-return valves with

More information

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

More information

Volute Casing Pump additional sizes to those of ISO 2858/EN 22858

Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:

More information

Butterfly valve with ADA pneumatic actuator

Butterfly valve with ADA pneumatic actuator 1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes

More information

KEYSTONE PN16 DOUBLE FLANGED BUTTERFLY VALVE FIGURE 631

KEYSTONE PN16 DOUBLE FLANGED BUTTERFLY VALVE FIGURE 631 The F631 PN16 is a bi-directional, double flanged, resilient seated butterfly valve FEATURES Approved to AS/NZS 4020, making the F631 suitable for use in potable water applications. Type tested in accordance

More information

Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring

More information

Motorized Butterfly Valve

Motorized Butterfly Valve Motorized Butterfly Valve Actuated butterfly valves PRODUCT DATA FEATURES Wide size range (DN 50 500) For On-Off Control with feedback signal Manual override Hand-Wheel design. Manual operation can be

More information

Series 02: DN40 and DN50 Series 01: DN Three-port slipper valves PN6

Series 02: DN40 and DN50 Series 01: DN Three-port slipper valves PN6 4 241 Series 02: DN40 and DN50 Series 01: DN 65...150 Three-port slipper valves PN6 VBF21... Three-port slipper valves, PN6, flanged Grey cast iron EN-GJL-250 DN 40...150 k vs 25...820 m 3 /h Angle of

More information

Válvulas AG1-BD BUTTERFLY VALVE. From 1970 close to our clients

Válvulas AG1-BD BUTTERFLY VALVE. From 1970 close to our clients Válvulas AG1-BD BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 2.5 06/2017 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing

More information

ball valve soft seated maintenance-free with floating ball

ball valve soft seated maintenance-free with floating ball Data sheet 8220.1/8 TOPI 210 ball valve soft seated maintenance-free with floating ball The sealing variants are approved in accordance with the german clear air regulations TA-Luft 2002 Flanged ends PN

More information

ERHARD is a company of. ERHARD ECLI butterfly valve

ERHARD is a company of. ERHARD ECLI butterfly valve ERHARD is a company of ERHARD ECLI butterfly valve The cost-effective solution for simple shut-off tasks Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial

More information

Technical Manual. Register 25 CONTENTS - AKH2-TAT

Technical Manual. Register 25 CONTENTS - AKH2-TAT D-88 Ahaus Postfach 112 D-81 Ahaus Telefon: +9(0) 21-8-100 Fax: +9(0) 21-8-200 Register: 2 Page: 1 Date: 0.2008 Contents Register 2 CONTENTS - AKH2-TAT (TAT = Type Acceptance Testing) Page Technical Data

More information

GAR-SEAL. Dimensions DN (other sizes upon request) Adapter Flange EN ISO 5211 NF E

GAR-SEAL. Dimensions DN (other sizes upon request) Adapter Flange EN ISO 5211 NF E Applications GAR-SEAL butterfly valves are used in most cases where corrosive, abrasive and toxic media need to be controlled. GAR-SEAL valves are used, for controlling, throttling and shutting off purposes

More information

Gas. VAG EKO plus Gate Valve resilient-seated - short face-to-face length PN 10/16 - DN KAT-A 1032-F4-G

Gas. VAG EKO plus Gate Valve resilient-seated - short face-to-face length PN 10/16 - DN KAT-A 1032-F4-G Gas VAG EKO plus Gate Valve resilient-seated - short face-to-face length Product characteristics and benefits Resilient seated in accordance with EN 1377 (IN 3352 - A) Face-to-face length acc. to EN 55-1,

More information

Pipeline Accessories. Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes

Pipeline Accessories. Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes Pipeline Accessories Rubber Steel gasket Type RSG Type RSG-V Type RFG 4 pipes Flange Gaskets Type RSG 4 pipes Reg.Nr. NG-5113CQ0574 Trinkwasser KTW/W270 Product Information RSG 4 pipes Rubber-Steel-Flange-Gasket

More information

Combi-Seal Flange Isolation Gaskets 4 pipes

Combi-Seal Flange Isolation Gaskets 4 pipes Combi-Seal lange Isolation Gaskets 4 pipes Pipeline Accessories lange Isolating Technology 4 pipes Isolating flange gaskets 4 pipes are especially designed for: Carbon steel Stainless steel Contact Corrosion

More information

Technical Manual. Register 8 CONTENTS - ARV2

Technical Manual. Register 8 CONTENTS - ARV2 Page: 1 Register 8 CONTENTS - ARV2 Contents Page Technical Data ARV2-DIN... 2 Technical Data ARV2-ANSI... 3 Material Specification ARV2... 4 Dimensions ARV2-DIN... 5 Dimensions ARV2-ANSI... 6 Spare Parts

More information

OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS

OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION

More information

Keystone resilient seated butterfly valves Figure 221 and 222

Keystone resilient seated butterfly valves Figure 221 and 222 Figure 221 and 222 An economical bonded resilient seated butterfly valve for bi-directional and end-of-line service F221 Wafer style valve F222 Lugged style valve Features Bubble tight shut-off at full

More information

Technical Manual. Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing)

Technical Manual. Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing) Page: 1 Contents Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing) Page Technical Data ARV2-TAT-DIN...2 Technical Data ARV2-TAT-ANSI...3 Material Specification ARV2-TAT...4 Dimensions ARV2-TAT-DIN...5

More information

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016) General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,

More information

Self-operated Pressure Regulators Type Universal Excess Pressure Valve

Self-operated Pressure Regulators Type Universal Excess Pressure Valve Self-operated Pressure Regulators Type 41-73 Universal Excess Pressure Valve ANSI version Application Pressure regulator for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN 15

More information

Mounting and Operating Instructions EB 8227 EN. Pneumatic Control Valve Type 3331/BR 31a Special version Type 3331/3278. Type 3331 Butterfly Valve

Mounting and Operating Instructions EB 8227 EN. Pneumatic Control Valve Type 3331/BR 31a Special version Type 3331/3278. Type 3331 Butterfly Valve Pneumatic Control Valve Type 3331/BR 31a Special version Type 3331/3278 Type 3331 Butterfly Valve Fig. 1 Type 3331/BR 31a (below) and Type 3331/3278 (top) Mounting and Operating Instructions EB 8227 EN

More information

Datasheet ERHARD SWING check valve

Datasheet ERHARD SWING check valve Datasheet Non-return valve with perfect self-centring The is a non-return valve that can be flexibly used for water and sewage. Featuring a 93 % opening value, it guarantees an extremely low zeta value,

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

Concentric butterfly valves

Concentric butterfly valves Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16

More information

Plast/Joint. The mechanical connection with unique one bolt system for plastic pipes d63 d315

Plast/Joint. The mechanical connection with unique one bolt system for plastic pipes d63 d315 Plast/Joint The mechanical connection with unique one bolt system for plastic pipes d63 d315 Plast/Joint >> Quick and efficient installation due to one bolt system >> Do you encounter repairs at difficult

More information

Neotecha NTB - NTC PFA lined ball valves

Neotecha NTB - NTC PFA lined ball valves These PFA lined ball valves are used in a wide variety of applications in many industries Features General application The valves are ideally suited for corrosive applications, requiring reliable performance,

More information

Diaphragm Valve MV 310

Diaphragm Valve MV 310 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation

More information

UNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings

UNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT is a company of UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT For Challenging Pipe Connections UNIJOINT, established in 1992 in the Netherlands, is a company with a vast experience in

More information

LEVEL CONTROL 3

LEVEL CONTROL   3 LEVEL CONTROL info@ayvaz.com www.ayvaz.com 3 LEVEL CONTROLLERS LEVEL CONTROLLERS FOR STEAM BOILERS FANTINI COSMI LEVEL REGULATORS Body Ductile Iron GGG 40.3 Stainless Steel AISI 316 Teflon Coated (Optional)

More information

Angle Seat Valve SV 300

Angle Seat Valve SV 300 Angle Seat Valve SV 00 Advantage corrosion resistant maintenance-free good control characteristics metal-free Application chemical plants industrial plants water treatment Utilisation for shut-off and

More information

Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate

More information

Wafer, Semi Lug, Lug and Flanged Type

Wafer, Semi Lug, Lug and Flanged Type Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated

More information

2-position electric actuators with Ball valves VBZ ½...11/4

2-position electric actuators with Ball valves VBZ ½...11/4 4 831.2 & VBZ ½...11/4 2-position electric actuators with Ball valves VBZ ½ 11/4 90 angle - Unidirectional rotation VBZ ½ 11/4 Electric rotary actuators for two-port ball valves Operating voltage AC 230

More information

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Type 5404 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation Contents 1 Operating instructions...2 2 Intended use...3 3

More information

VUD: 2-way flanged valve, PN 6 (pn.)

VUD: 2-way flanged valve, PN 6 (pn.) Product data sheet 76.110 VUD: 2-way flanged valve, PN 6 (pn.) How energy efficiency is improved Efficient use in continuous control systems Features Continuous control of cold and hot water in closed

More information

Motorized Butterfly Valve

Motorized Butterfly Valve Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN500) for PN16 type For On-Off Control Manual override non-clutch design. Manual operation can be operated

More information

Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation

Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug

More information

3- and 4-Way Ball Valves KH3/KH4

3- and 4-Way Ball Valves KH3/KH4 3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an

More information

L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST

L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body

More information

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging

More information

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400

More information

Long Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Long) Series 130. Document : S130 Revision : 3 Year : 2014

Long Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Long) Series 130. Document : S130 Revision : 3 Year : 2014 Year : Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description

More information

Side channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description

Side channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155

More information

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB

More information