Georg Fischer Waga N.V. A BIG welcome MULTI/JOINT 3000 Plus DN450 - DN600
|
|
|
- Hortense Butler
- 5 years ago
- Views:
Transcription
1 Georg Fischer Waga N.V. A BIG welcome MULTI/JOINT 3000 Plus 40 -
2 The original just got BIGGER and BETTER! The well-known and trusted wide range MULTI/JOINT 3000 Plus system has now been extended with the sizes 40. You can now benefit from the advantages of the patented MULTI/JOINT 3000 Plus system in the bigger diameters as well. An advanced solution, that fully meets the market demands, to replace traditional connection techniques. Bigger and better! Superb user-friendliness The MULTI/JOINT 3000 Plus 40 - fittings have an angularity of ± per socket-end at maximum end load resistance. For a coupling this means a total of maximum angularity. This angularity is unique in the marketplace and offers the installers superb user friendliness. Restraint at high pressure for your peace of mind The MULTI/JOINT 3000 Plus 40 - fittings are suitable for applications in water up to bar and gas up to bar. The non- versions are suitable for applications in water up to bar and gas up to bar. Easy installation The MULTI/JOINT 3000 Plus 40 - fittings are easy to handle on site thanks to the lifting eye. The patented design of the 40 Uni/Fiks ring, which attaches the ring to the body by means of clips, simplifies the installation. The fitting slides over the pipe without any interference. In other words: there is no need for disassembly.
3 Your benefits Saving time and costs, no thrust blocks needed Corrosion proof thanks to a Resicoat epoxy powder coated cast iron body and clamp ring Easy to install thanks to the design, which enables sliding over the pipe and angularity (max. per socket end, max. per coupling) reversible bolts for quick and easy installation Easy to handle thanks to the lifting eye Hygiene protection Moreover, the MULTI/JOINT 3000 Plus fittings 40 - are supplied with hygiene protection. Thanks to this protection the fittings remain free of dust and dirt until the time of use. Tested and approved The MULTI/JOINT 3000 Plus fittings 40 - are, just as the full MULTI/JOINT system, intensively tested. Certification according to EN 142 is pending. All MULTI/JOINT 3000 Plus fittings are supplied with a certified Resicoat epoxy powder coating, which provides an excellent protection against corrosion. + Durable and reliable large diameter fittings for a quick, safe and simple repair solution
4 MULTI/JOINT The original! Perfection in every detail Clamp ring: ductile cast iron GGG4 EN-GJS-40- with Resicoat epoxy powder coating type RT 9000 R4 Uni/Fiks ring Uni/Fikser: stainless steel A4 Varioseal: rubber gasket (EPDM or NBR) (AISI 3) Body: ductile cast iron GGG4 EN-GJS-40- with Resicoat epoxy powder coating type RT 9000 R4 Washer: stainless steel A2 (AISI 304) or stainless steel A4 (AISI 3) Nuts: stainless steel A2 (AISI 304) galvanised and passivated or stainless steel A4 (AISI 3) galvanised and passivated Bolts: stainless steel A2 (AISI 304) PTFE coated or stainless steel A4 (AISI 3) PTFE coated
5 Product overview MULTI/JOINT 3000 Plus, coupling, non, up to angular deflection MULTI/JOINT 3007 Plus, coupling,, up to angular deflection MULTI/JOINT 30 Plus, reduced coupling, non, up to angular deflection MULTI/JOINT 37 Plus, reduced coupling,, up to angular deflection MULTI/JOINT 300 Plus, flange adaptor, non, up to angular deflection Drilling pattern PN/PN PN/PN MULTI/JOINT 307 Plus, flange adaptor,, up to angular deflection Drilling pattern PN/PN PN/PN MULTI/JOINT 310 Plus, reduced flange adaptor, non, up to angular deflection Drilling pattern PN/PN PN/PN MULTI/JOINT 317 Plus, reduced flange adaptor,, up to angular deflection Drilling pattern PN/PN PN/PN
6 The complete system Model Type Dimensions Coupling Reduced coupling adaptor Reduced flange adaptor End cap blind End cap ¾" - 2" threaded PE adaptor non non non non non non blind 3200 blind 3207 threaded 3200 threaded Spigot end Reduced spigot end Duckfoot Reduced duckfoot Bend non non non non non The complete solution for all your connection, maintenance and repair applications
7 Technical specifications Specifications Body Clamp ring Coating Varioseal rubber gasket Uni/Fiks and Uni/Fleks ring Uni/Fiksers Bolts and nuts Washers Working temperature Working pressure (PFA)* Certificates Ductile cast iron GGG4 in accordance with EN-GJS-40-. Ductile cast iron GGG4 in accordance with EN-GJS-40-. Resicoat epoxy powder coating, type RT 9000 R4, meets the requirements of for example ACS, Belgaqua, KTW, NSF Standard 61, WRAS, KIWA. Colour red (RAL 3003). Minimum layer thickness 20 micron, in accordance with the GSK-register. Potable water: EPDM in accordance with EN Water and gas: NBR in accordance with EN 62. POM (polyoxymethylene) and/or glass fibre filled Polyamide. Stainless steel A4 (AISI 3). Stainless steel A2 (AISI 304) or stainless steel A4 (AISI 3). Bolts are PTFE coated, nuts are galvanised and passivated to prevent galling. Stainless steel A2 (AISI 304) or stainless steel A4 (AISI 3). Drilling pattern PN / PN in accordance with EN C to +0 C. Non : up to PFA bar water and up to bar gas. Restraint: up to PFA bar water and up to bar gas. * For details see user manual or contact your supplier. ACS, Belgaqua, WRc, ÖVGW, SVGW, DVGW, WRAS, NSF and KIWA. EN 142: ÖVGW, SVGW and KIWA (pending). Sealing system Suitable for all pipe materials AC PE PVC Steel Grey cast iron (Ductile) cast iron Nominal angularity* Insert stiffener max. ± In case of connecting PE or PVC pipes, install an insert stiffener. * based on the middle of the range
8 Georg Fischer Waga N.V. Contact information P.O. Box AG EPE The Netherlands T F waga.ps@georgfischer.com The technical data are not binding and not expressly warranted characteristics of the goods. They are subject to change. Please consult our General Conditions of Supply. 1/EN Georg Fischer Waga N.V. 201, printed in the Netherlands
MULTI/JOINT 3000 Plus. The connection for all pipe diameters Restraint Non restraint DN50 DN400. Georg Fischer Waga N.V.
MULTI/JOINT 3000 Plus The connection for all pipe diameters Restraint Non restraint DN50 DN400 Georg Fischer Waga N.V. DAS ORIGINAL EL ORIGINAL HET ORIGINEEL THE ORIGINAL MULTI/JOINT 3000 Plus >> Wide
Plast/Joint. The mechanical connection with unique one bolt system for plastic pipes d63 d315
Plast/Joint The mechanical connection with unique one bolt system for plastic pipes d63 d315 Plast/Joint >> Quick and efficient installation due to one bolt system >> Do you encounter repairs at difficult
MULTI/JOINT. One size fits and grips all End-load resistant - Flexible DN50 - DN600
MULTI/JOINT One size fits and grips all End-load resistant - Flexible DN50 - DN600 1 MULTI/JOINT FITTINGS large tolerance fittings It means that pipes that can be fitted may have different diameters, with
APPENDIX: TECHNICAL INFORMATION
Materials Test and Operation Specifications Quality Assurance MATERIALS: Cast Iron Grey iron GD-250 GG-25 to DIN 1691-1964 Grade 220/250 minimum to BS 1452-1990 Class 35B/40B to ASTM-A48-1974 250-200 -
HAWLE-specification water
water GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN HAWLE - Epoxy Powder-Coating High quality corrosion
UNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings
UNIJOINT is a company of UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT For Challenging Pipe Connections UNIJOINT, established in 1992 in the Netherlands, is a company with a vast experience in
HYMAX GRIP Wide-Range Restraint Solutions
HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine
HYMAX GRIP by Krausz Restraint Solutions
HYMAX GRIP by Krausz Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. Krausz restraint products combine
Georg Fischer Waga N.V. Your mechanical connection for plastic pipes restraint - non restraint d63 - d315. Products. Plast/Joint
Georg Fischer Wg N.V. Your mechnicl connection for plstic pipes restrint - non restrint - Proucts Plst/Joint Plst/Joint >> Your mechnicl restrint connection for plstic pipes >> With the increse use of
Georg Fischer Waga NV PRODUCT APPRAISAL REPORT 1428 Issue 2
WSAA Product Appraisal 1428 1 Georg Fischer Waga NV PRODUCT APPRAISAL REPORT 1428 Issue 2 Georg Fischer Waga Multi/Joint 3000 Plus Restrained Joint Couplings, End Caps, Bends and PE Adaptors EN 14525:2004
Wide-Range Coupling Solutions
Wide-Range Coupling Solutions HYMAX. CONNECTING THE FUTURE. A revolutionary product that set a new industry standard, the HYMAX* product line has been field-proven in millions of installations world-wide.
ROMACON COUPLINGS AND FLANGE ADAPTORS
ROMACON COUPLINGS AND FLANGE ADAPTORS Couplings DN mm DN inches Range Romafit Weight kg 50 2 59-73 3,8 65 2,5 72-85 4,3 80 3 88-103 4,5 100 4 108-128 5,6 125 5 132-146 6,8 125 5 139-153 6,9 150 6 159-182
General lnstructions BAIO System
General lnstructions BAIO System For decades mainly flangeless components have been used for pipes and pipe fittings of buried supply lines, as this coupling system affords some technical and economic
REPAMAX. Versatile Stainless Steel Coupling. Versatile Stainless Steel. By Krausz Wide-Range Couplings. Joins as a coupling. Repairs as a clamp.
JOIN REPAIR RESTRAIN REPAMAX Versatile Stainless Steel By Krausz Wide-Range Couplings Joins as a coupling. Repairs as a clamp. Versatile Stainless Steel Coupling REPAMAX Product Information Versatile Stainless
UNIJOINT is a company of. UNIJOINT Dismantling Joints
UNIJOINT is a company of UNIJOINT Dismantling Joints Essential for straightforward and secure installation Source: ABB Dismantling joints play a decisive role in the design and layout of pipelines and
Did You Know...? Underground drainage products are also available from BSS Drainage from the following sources
Did You Know...? Underground drainage products are also available from BSS Drainage from the following sources Polypipe Terrain The comprehensive range of underground drainage offers both rigid and core
Formstücke, Flanschendruckrohre. und Armaturen. Index: (click with mouse) Fittings, Flanged pipes and Valves made of Ductile Cast Iron ( GGG )
FITTINGS AND VALVES Index: (click with mouse) Formstücke, Düker in general Flanschendruckrohre Preamble und Armaturen aus The complete duktilem product Gusseisen range ( GGG ) > Index Location plan Flag
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ATLANTIC PLASTICS is a company of. UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors
ATLANTIC PLASTICS is a company of UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors The UPE MultiDiameter range of wide tolerance couplings and flange adaptors can be used for almost any
Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented
Push-Fit Transition Coupling for PE-100/PVC-U water pipes up to 16 bar patented PE-100 / PVC-U pull-out resistant long type Push-Fit Transition Coupling for PE-100 and PVC-U water pipes up to 16 bar d90
HYMAX VERSA by Krausz Coupling and Repair Solutions
HYMAX VERSA by Krausz Coupling and Repair Solutions HYMAX VERSA. VERSATILE STAINLESS STEEL COUPLING. Krausz HYMAX VERSA products provide a highly versatile stainless steel coupling solution for connecting
Float valve with balanced single seat Mod. ATHENA
Float valve with balanced single seat Mod. ATHENA The ATHENA is an equilibrium, single seat upstream pressure balanced float valve, which automatically controls the constant level of a tank or reservoir,
2019 Price List. Thrust-Resistant Joints Pressure Pipe Fittings for Plastic Pipelines Pipe Fittings for Sewage Pipelines Socket Connections
FITTINGS AND VALVES 2019 Price List Gate Valves Service Connection Valves Hydrants Butterfly Valves Back Flow Preventers, Ventilation Valves Control Valves Novo Plug-in System Accessories Pressure Pipe
Non Return Valves.
Non Return Valves Table of contents Product information Type 4010 & 4010HD Type 4010, with lever and weight Type 4010 HD, with lever and weight + hydraulic damper Type 4020, slanted seat with/without damper
RESILIENT SEATED GATE VALVE FAF 6200
PRODUCTION STANDARTS DN40 DN800 PN 10-16 Design EN 1171 / EN 1074 Connection Face to Face EN 1092-2 / ISO 7005-2 - Flanged EN 558 Series 15 / DIN 3202 F5 Marking EN 19 Tests EN 12266-1 Corrosion Protection
RANGER FLANGE ADAPTORS
RANGER ADAPTORS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. Because of the
Hawle Haku PE Pipe Saddle
Hawle Haku PE Pipe Saddle Scan for more information Technical Guide W9.1 Specifically designed as a PE mechanical connection solution. Suitable for PE pipes of all pressure ratings up to PN 16. DN40-360.
Valves and accessories for gas
Valves and accessories for gas When safety counts! AVK INTERNATIONAL A/S When safety counts, you can count on products from AVK! It s all about safety Safety comes first. Therefore AVK does not compromise
Pioneers in pipe solutions NOW. up to DN600
Pioneers in pipe solutions NOW Available up to DN600 Get to grips with the NEW DN600 Key Benefits Grips and seals on the most corroded pipes Increased diameter range and wide tolerance delivers a reduction
TEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
Butterfly valves. Introduction. Made of ductile cast iron
Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international
MaxiFit. High Tolerance Mechanical Pipe Fittings. World leaders in pipe joint, repair & flow control products
World leaders in pipe joint, repair & flow control products The Viking Johnson range of MaxiFit universal pipe couplings represents the very latest in mechanical pipe coupling technology. MaxiFit products
Fittings, flanged pipes and valves made of ductile cast iron (GGG)
FITTINGS AND VALVES Index: (click with mouse) Fittings, flanged pipes and valves made of ductile cast iron (GGG) Düker in general Preamble The complete product range > Index Location plan Flag / Addresses
Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style
Wafer style Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance. Features General application
Válvulas AG1-BD BUTTERFLY VALVE. From 1970 close to our clients
Válvulas AG1-BD BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 2.5 06/2017 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing
Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style
Wafer style Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance Features General application Since
Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style Sizes DN PN 10/16
Wafer style Sizes DN -3 PN /1 Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance. Features Patented
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
BV BAKIO Soft Sealing Gate Valve
TALIS in the process of innovation and continuous improvement has designed a new soft sealing gate valve named BAKIO. The process has been based on the development of the features that our customers perceive
General information Gate valves
General information Gate valves In 1957, Hawle invented the resilient-seated gate valve with multiple O-ring sealing of the valve spindle and had it patented. Today, this type of gate valve is the standard
Operating manual Keula gate valves DN PN10/16
Operating manual Keula gate valves DN40-400 PN10/16 Page - 1 Manufacturer: Keulahütte GmbH Geschwister-Scholl-Str. 15 02957 Krauschwitz GERMANY Manufacture and sale of the slide valves: Slide valves according
VAG Non-Return Valves
VAG Non-Return Valves VAG SKR Slanted Seat Tilting disk Check Valve Shaft Bearing bush Disk Seat Nominal pressures PN 10, 16 Nominal diameters DN 200 1400 Fields of application: drinking water, preclarified
Welcome to the world of TALIS
Valve Catalogue Welcome to the world of TALIS Contents Our job is to protect water, the element that is vital for life. Together with our customers and partners, we are living up to this responsibility
QuickFit. Simple. Couplings & Flange Adaptors. Pioneers in pipe solutions. Close Tolerance Preassembled Fittings
Simple QuickFit Couplings & Flange Adaptors Close Tolerance Preassembled Fittings Pioneers in pipe solutions QuickFit Overview Dedicated Couplings & Flange Adaptors The QuickFit coupling range is designed
Hydrants. Tab 2, page 1
Hydrants Tab 2, page 1 Hydrants Hydrants Made of ductile cast iron (SGCI) Introduction Hydrants made by Keulahütte GmbH in Krauschwitz are manufactured based on many years of design and development work
Valves Range YSTF Y-Strainer PN16 Flanged. Applicable Standards. Technical Data. Material Certification
Valves Range YSTF Y-Strainer PN16 Flanged No Component Material 1 Body Ductile iron GGG40 2 Bonnet Ductile iron GGG40 3 Screen SS304 4 Gasket EPDM 5 Washer 140HV 6 Drain Plug KTH330-08 7 Nut Gade 8.8 8
Welcome to the world of TALIS
Valve Catalogue Welcome to the world of TALIS Our job is to protect water, the element that is vital for life. Together with our customers and partners, we are living up to this responsibility all over
Catalogue Easy inside
Catal ogue 2.2010 The complete product range Mini Middle Page 4: Unifix Mini: The small, light and quick repair solution for sealing holes, fractures and porous areas in water-bearing pipes. Suitable for
General Information Hydrants and Flushing Valves
General Information Hydrants and Flushing Valves Product Categories 4.1 Underground Hydrants 4-4 4.2 Above Gound Hydrants 4-10 4.3 Flushing Valves 4-13 www.hawle.de 4-3 4.1 Underground Hydrants www.hawle.de
AVK DOUBLE ECCENTRIC BUTTERFLY VALVE, PN 10/16, INTEGRAL SEAT, IP 67 GEARBOX WITH HANDWHEEL
AVK OUBE EENTRI BUTTERFY VAVE, PN 10/16, INTEGRA SEAT, IP 67 GEARBOX WITH HANWHEE 00 019 ouble eccentric butterfly valve, for water to max. 70, designed according to EN 593, Face to face according to EN
BUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
FITTINGS AND VALVES. Novo Plug-in System The Intelligent Solution. The thrust-resisting joint system for valves and fittings with Düker etec enamel
FITTINGS AND VALVES Novo Plug-in System The Intelligent Solution The thrust-resisting joint system for valves and fittings with Düker etec enamel 1 Novo plug-in sockets the interesting alterna The most
Materials : Cast iron or stainless steel body
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges PN10/16 or PN25-10 C + 90 C for NBR, 110 C for EPDM,180 C for FKM Max Pressure : 10 to 16 Bars ( according
Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation
Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug
series BUTTERFLY VALVE DOUBLE ECCENTRIC FLANGED FAF 3800 PRODUCTION STANDARDS DN100 DN2000 PN Design EN 593 EN ISO Flanged
PRODUCTION STANDARDS DN100 DN2000 PN 10-16-25 Design EN 593 Connection End Connection EN 1092-2 ISO 7005-2 - Flanged EN 558 Series 14 DIN 3202 F4 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR Bortek Pipe Coupling Systems info / order by mail bortek@bortek.com.tr info / order by Fax +90 / 212 876 55 26 info / order
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
Dual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
Materials : Cast iron or Stainless steel
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
MACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number:
ACROMACROMACROMA MACRO HP ROMAC S SECOND GENERATION TWO-BOLT E X T E N D E D R A N G E C O U P L I N G NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes patent number: 8448993 BMACROHP
AVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)
AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO
HAWLE-AIR RELEASE VALVES
HAWLE-AIR RELEASE VALVES HAWLE-AIR RELEASE VALVES Contents: Dimensions of Air Release Valve Page 2 Why use Air Release Valves? Page 3 Application: Potable water Air Release Valves, DN 1" - DN 2" Page 4
Precision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines
Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect
THOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange No Component Material 1 Body Ductile iron GGG40 2 Wedge DI Fully Vulcanised EPDM 3 Wedge Nut Brass 4 Stem SS420 5 Bolt Q235+Zinc 6 Gasket EPDM
VAG Butterfly Valves
VAG Butterfly Valves VAG EKN Butterfly Valve H-Series New for the highest requirements Runners Pressure compensation channels O-ring seal Hydrodynamic disk Automatic sealing system Retaining ring Tapered-pin
AG1-BC BUTTERFLY VALVE
AG1-BC BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 9.4 09/2016 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing
INFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE:
INFACT CORPORATION WATERWORKS PRODUCTS SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DATA / PRODUCT CHECKLIST EASY-TO-INSTALL SPACE-SAVING RESTRAINT
Style Flange Adapter
Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved
DOUBLE OFFSET FLANGED BUTTERFLY VALVES GRIP THAT HOLDS
GRIP THAT HOLDS SERIES 2E-3 // PN 10/16/25/40 // DN 150-3000 (6 118 ) // Hydraulic equipment // Industrial piping // Sanitary installations DOUBLE OFFSET FLANGED BUTTERFLY VALVES GENERAL INFORMATION GENERAL
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
Technical Manual. Register 25 CONTENTS - AKH2-TAT
D-88 Ahaus Postfach 112 D-81 Ahaus Telefon: +9(0) 21-8-100 Fax: +9(0) 21-8-200 Register: 2 Page: 1 Date: 0.2008 Contents Register 2 CONTENTS - AKH2-TAT (TAT = Type Acceptance Testing) Page Technical Data
ERHARD is a company of. Datasheet ERHARD ABS Premium service valve
ERHARD is a company of Datasheet ERHARD ABS Premium service valve ERHARD ABS Premium service valve The innovative tapping systems With the new it has been possible to reduce the number of required models
VERSION 2. PVC FITTINGS & VALVES Technical Catalogue
VERSION 2 PVC FITTINGS & VALVES Technical Catalogue INTRODUCTION Plasson s innovative products revolutionized the way of connecting polyethylene pipes in the 1960 s. We started with fittings for agricultural
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges PN10/16-15 C + 110 C ( 130 C C temporarily) Max Pressure : 16 Bars up to DN300, 10 bars over Specifications
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
CONDA-VLC Type Series Booklet
Level Control Valve PN 16 DN 25-300 Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
Generation. UltraGrip. Next. Optimum Wide Tolerance & Full End Restraint PIONEERS IN PIPE SOLUTIONS
Next Generation UltraGrip Optimum Wide Tolerance & Full End Restraint PIONEERS IN PIPE SOLUTIONS Get to grips with the NEW DN600 Key Benefits Grips and seals on the most corroded pipes Increased diameter
High Pressure Centrifugal Pumps Product Overview
High Pressure Centrifugal Pumps Product Overview High Pressure Centrifugal Pumps Product Overview Wilo-Economy MHI Duty chart H[m] 6 5 4 Wilo-Economy-MHI 5 Hz Non self-priming pumps for: Water supply and
MADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Rising rotating
Saddle valves KH210GR - KH230GR
Saddle valves KH210GR - KH230GR Manufacturer: Keulahütte GmbH Geschwister-Scholl-Str. 15 02957 Krauschwitz GERMANY Production and distribution of tapping valves: Tapping valves according to DIN 3543 with
BUTTERFLY VALVE TYPE 451 WITH HANDWHEEL
BUTTERFLY VALVE TYPE 451 WTH HANDWHEEL 0 / PN, and Body: EN-GJS--15 (spheroidal graphite cast iron d.c.i.). Valves inside lined with enamel, securing long undisturbed service and excellent flow pattern
E2 valve - BAIO socket-socket For ductile iron, steel, PE and PVC pipes, PN 16 Page G 3/1
HAW - BAIO SYSTM The easy and time-saving solution Page G 2 HAW - BAIO SYSTM The fastest connection in the pipeline system Page G 2/1 Accessories Page G 2/2 Page G 3 2 valve - BAIO socket-socket For ductile
AVK (WWE) BUTTERFLY VALVE DN (2" to 56") 75 (EVS)
AVK (WWE) BUTTERFLY VALVE DN 50 1400 (2" to 56") 75 (EVS) Wafer type Face to face dimension to ISO 5752 short, basic series 20 (BS 5155 wafer short, DIN 3202K1) Flange connection to ISO 70052 (BS EN 10922,
Materials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications
Valves, Hydrants & Fittings. Water Valves Gate Valves / Fire Hydrants / Check Valves / Air Valves / Accessories
Valves, Hydrants & Fittings AVK Water Valves 126-134 Gate Valves / Fire Hydrants / Check Valves / Air Valves / Accessories Gas Valves 135-143 Gate Valves / Drilling Valves / Ball Valves / Accessories Water
PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
Flangeless and Restraint Coupling System for Valves and Fittings
BAIO System Flangeless and Restraint Coupling System for Valves and Fittings For decades, flangeless components have been used for pipes and pipe fittings of buried supply lines because this coupling system
Grooved Butterfly Valves
Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600
Elbow ball check valves PRODUCT CATALOG
Elbow ball check valves PRODUCT CATAOG Version 01.16 Technical data Range of available diameters: 32 300. Pressure rated to PN 1.6 MPa (all valves are tested to PN 1.0 MPa leak test / PN 1.6 MPa hydrostatic
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
THOMAS. Large Diameter Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Large Diameter Couplings Dedicated Connections For Rigid Large Diameter Pipework F1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
AVK UK GROSS PRICE LIST 2017
AVK UK GROSS PRICE LIST 2017 AVK UK GROSS PRICE LIST 2017 AVK UK PRICE LIST 2017 AVK UK is part of the globally renowned AVK Group, one of the leading manufacturers of valves for the water, gas and waste
VAG NOVA 284 Standpost Hydrant. Technical details. Product features
VAG Hydrants VAG NOVA 284 Standpost Hydrant Maintenance-free stem seal Nominal diameters DN 80, 100 Installation depth: - DN 80: 1,00 m / 1,25 m / 1,50 m - DN 100: 1,25 m / 1,50 m Standard version: Upper
AVK WATER SUPPLY WE DELIVER PURE QUALITY JUST LIKE YOU
AVK WATER SUPPLY WE DELIVER PURE QUALITY JUST LIKE YOU A COMPLETE RANGE OF VALVES, HYDRANTS AND ACCESSORIES AVK has been in the valve business for more than 40 years. Today, we are offering solutions for
Flange connections For PE pipes, restraint. For ductile iron pipes, standard, restraint. Flange connections For steel pipes, standard, restraint
FANGE ONNETIONS Page 2 Page 3 connections For PE pipes, restraint Synoflex flange System 2000 flange connections For PV pipes For A pipes Synoflex flange System 2000 flange Page 2/1 Page E 4/1 Page F 4/1
Modular valve block MVB 100/200
Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution