Plast/Joint. The mechanical connection with unique one bolt system for plastic pipes d63 d315

Transcription

1 Plast/Joint The mechanical connection with unique one bolt system for plastic pipes d63 d315

2 Plast/Joint >> Quick and efficient installation due to one bolt system >> Do you encounter repairs at difficult to reach places in your piping system? Is the pipe that needs repair situated in a trench full of water or is the necessary electricity not available? Is there hardly any space to move the pipe to do a good repair? If so, we have the solution that is designed for these situations: the Plast/Joint fitting. The one bolt system enables an easy, quick and efficient repair. Connecting plastic pipes When it comes to underground piping systems, plastic pipes are used more and more. The Plast/Joint fully accommodates this development, because of its ability to easily make transitions in plastic piping systems, such as PE, PVC, PB and also PEX. The Plast/Joint fitting is available in the sizes d63 up to and including d315 as a coupling and a flange adaptor model. The Plast/Joint fittings can operate at a pressure of 16 bar for water and 8 bar for gas. Fields of applications Water transport Water distribution Gas distribution Waste water Maintenance and repair Industrial applications

3 >> The alternative when electro fusion or butt fusion is not possible >> Indispensable alternative The Plast/Joint fittings are designed for situations where little to no room is available to do the repair. Thanks to the one bolt design the fitting can easily be installed. You only need to turn one single bolt instead of 4, 6 or 8 and before tightening the nut you can move the clamping ring in any desired position. If electricity is not available and electro fusion or butt fusion is not an option, the Plast/Joint is your solution. The one bolt design allows you to make a connection without the use of welding machines or special tools. Therefore the Plast/Joint fittings are an indispensable alternative when electro fusion or butt fusion is not possible or desired. Multi-lip progressive sealing system The Multi-lip rubber gasket is a progressive sealing system that is reinforced with a plastic ring. This ring provides absolute assurance that the rubber gasket stays in place when the pipe is pushed into the fitting. The progressive sealing system ensures a leak tight connection as the sealing force increases when the internal pressure rises.

4 >> Technical specifications >> Specifications Plast/Joint Types: Plast/Joint 8000 Coupling, non-restraint Plast/Joint 8007 Coupling, restraint Plast/Joint 8050 Flange adaptor, non-restraint Plast/Joint 8057 Flange adaptor, restraint Body Ductile cast iron GGG45 in accordance with EN-GJS d (mm) d63 d75 d90 d110 d125 d140 d160 d180 d200 d225 d250 d280 d315 DN (mm) DN50 DN65 DN80 DN100 DN100 DN125 DN150 DN150 DN200 DN200 DN250 DN250 DN300 Clamp ring Ductile cast iron GGG45 in accordance with EN-GJS Gasket Flanges Drilling pattern PN16 / PN10 in accordance with EN Coating Resicoat epoxy powder coating, type RT 9000 R4, meets the requirements of ACS, Belgaqua, KTW, NSF Standard 61, WRAS, KIWA for use in potable water lines. Colour red (RAL 3003). Minimum layer thickness 250 micron, in accordance with the GSKregister. Gasket For water and gas: NBR in accordance with EN 682. For potable water: EPDM in accordance with EN Insert Stiffener For use in gas always use an insert stiffener. For use in water see the Plast/Joint user manual Grip ring Brass. Working temperature -5 C up to +50 C. Bolt and nut Stainless steel A2 (304). Bolt is teflon coated, nut is galvanised and passivated to prevent galling. Optional: stainless steel A4 (316). Washers Stainless steel A2 (AISI 304). Molykote copper paste In case of reusing Plast/Joint fittings, we recommend greasing the bolts with Molykote copper paste to ensure smooth re-tightening. Working pressure (PFA) For water: up to PFA 16 bar. For gas: up to PFA 8 bar. Certificates ACS (France), Belgaqua (Belgium), WRc (United Kingdom), ÖVGW (Austria), SVGW (Switzerland). DVGW (Germany) and others.

5 >> Maintenance free connections >> Your benefits Easy installation where access is difficult thanks to the one bolt system Quick, efficient and cost effective installation, no machines or special tools necessary Durable and corrosion proof thanks to Resicoat epoxy powder coating Reusable Applicable for under- and above-ground use All weather use Long life expectancy The Plast/Joint fittings have an anticorrosion Resicoat epoxy powder coating. Resicoat can withstand all kinds of weather influences and therefore the Plast/Joint fittings are suitable for under- and aboveground use in water and gas applications. The Plast/Joint fittings are maintenancefree and have a designed life expectancy of at least 50 years. This ensures a constant supply of water and gas to the end user.

6 Georg Fischer Waga N.V. worldwide at home Our solutions MULTI/JOINT 3000 Plus wide-range fittings restraint - non-restraint DN50 - DN300 (2-12 ) MULTI/JOINT XL wide-range fittings non restraint DN300 - DN600 (12-24 ) ST-System dedicated couplings and flange adaptors with or without reduction - non-restraint DN40 - DN2800 (1½ ) FGR stainless steel couplings restraint - non-restraint DN25 - DN2000 (1-80 ) Plast/Joint mechanical connection for plastic pipes restraint - non-restraint d63 - d315 Multi/Clamp stainless steel repair clamps, tapping tees and saddles DN25 - DN1000 (1-40 ) Multi/Saddle Plus wide-range tapping saddle with or without shut-off mechanism pipes: DN60 - DN300 (2½ - 12 ) Others W400/W410 drilling device WAL/V leak clamp DN80 - DN700 (3-28 ) MULTI/JOINT PE adaptor DN65 - DN300 (2½ - 12 ) Our expertise Georg Fischer Waga N.V. is the jointing technology specialist, offering a complete range of products that have been used in the water & gas market for many years. No matter how complicated your connection problem is, we can offer you a solution. Innovator and market leader in connection technology Extensive application know-how and know-why Decades of experience Long-term system solutions One stop shopping Local support worldwide Adding Quality to People s Lives The technical data are not binding and not expressly warranted characteristics of the goods. They are subject to change. Please consult our General Conditions of Supply. WA2080/0911/EN WA0000/00000/EN Georg Fischer Waga N.V. 2011, printed in the Netherlands Local distributor Georg Fischer Waga N.V. Lange Veenteweg 19, 8161 PA, Netherlands P.O. box 290, 8160 AG Epe, Netherlands T +31 (0) / F +31 (0) waga.ps@georgfischer.com /