According to AWWA-standard
|
|
|
- Camron Bryant
- 5 years ago
- Views:
Transcription
1 According to -standard Water Fire fighting - UL/FM 304 Gate valves - Cast iron 320 Gate valves OS&Y 306 Service connection valves 322 Post indicators 306 Combi valves 307 Gate valves Gate valves (18-24") 311 Gate valves with PE-ends 312 Wrench nut 312 Handwheels 314 Swing check valves 315 Fire hydrants 315 Accessories for fire hydrants
2 Products for water according to Price list 2008 Gate valves Series 25/40 FL X FL To C509 Flanged ends to ANSI B 16.1 Class 125 Gray cast iron Size 2"-16" w/ w/ handop.nut wheel " " " " " " " " * 14" * 16" *CAUTION: 14"-24" discount applies Series 25/00 MJ X MJ To C509 Mechanical joint ends Gray cast iron Size 2"-16" less MJ accessories " " " " " " " * 14" * 16" *CAUTION: 14"-24" discount applies Series 25/30 MJ X FL To C509 Mechanical joint end X Flanged end to ANSI B 16.1 Class 125 Gray cast iron Size 3"-16" less MJ accessories " " " " " " * 16" *CAUTION: 14"-24" discount applies Series 25/38 MJ X TAP To C509 Mechanical joint end X Flanged end for tapping sleeves Gray cast iron less MJ accessories " " " " " Use undersize cutter only with the Series 25 tapping valve. For full-size cutter use Series 45/67 tapping valve on page 186 Valves include tapping accessory kit; if 304 stainless steel bolts are required in tapping accessory kit add to list price: 4" - 6" add $6 8" add $15 10" - 12" add $
3 Products for water according to Price list 2008 Series 25/50 PO X PO To C509 Push-on joint ends to C111 Gray cast iron Size 4"-16" w/o gasket " " " " " * 16" Note: Special gaskets available upon request at additional charge *CAUTION: 14"-24" discount applies. Gate valves Series 25/60 PO X FL To C509 Push-on joint end to C111 X Flanged end to ANSI B 16.1 Class 125 Gray cast iron Size 4"-16" w/o gasket " " " " " * 16" Note: Special gaskets available upon request at additional charge *CAUTION: 14"-24" discount applies. Series 25/10 IPS X IPS To C509 Push-on joint ends for PVC pipes Gray Cast Iron Size 2.5"-12" w/ gasket " " " " " " * 10" * 12" *10" and 12" utilize PO to IPS transition gaskets (AVK Part No. 25-xxx-89) Series 25/AO MJ Cut-In Valve To C509 Mechanical join ends for cut-in Gray cast iron less accessories A " A " A " A " A " Note: Special gaskets available upon request at additional charge
4 Products for water according to Price list 2008 Service conn. valves Series 03/39 NPT X NPT NPT ends Ductilie Iron Size 1"-3" w/ w/ handop. nut wheel " " " " " " Combi valves Series 03/36 IPS X IPS Push-on joint ends for PVC pipes Cast Iron Size 2" w/ op.nut " Series 18/07 MJ Combi-Tee Combi valve tee Mechanical joint ends with 6" valve on outlet Ductile Iron Size 6"-12" less gaskets " x 6" " x 8" " x 12" Series 18/57 PO Combi-Tee Combi valve tee Push-on joint ends to C111 with 6" valve on outlet Gray cast iron Size 6"-12" less gaskets " x 6" " x 8" " x 12"
5 Products for water according to Price list 2008 Products for water according to Price list 2008 Series 45/40 FL X FL 250 lb. Flange Full wall ductile iron to C509/C515 Flanged ends to ANSI B 16.1 Class " " " " " Gate valves Series 45/46 FL X FL OS&Y 250 lb. Flange Full wall ductile iron to C509/C515 Flanged ends to ANSI B 16.1 Class " " " " " Series 45/50 FL X FL 125 lb. Flange Full wall ductile iron to C509/C515 Flanged ends to ANSI B 16.1 Class " " " " " Series 45/00 MJ X MJ Full wall ductile iron to C509/C515 Mechanical joint ends " " " " "
6 Products for water according to Price list 2008 Gate valves Series 45/30 MJ X FL Full wall ductile iron to C509/C515 Mechanical joint end X Flanged end ANSI B 16.1 Class 125 Ductile Iron Size 3"-12" less MJ accessories " " " " " " Series 45/67 MJ X TAP Full wall ductile iron to C509/C515 Mechanical joint end X Flanged end for tapping sleeves Ductile Iron less MJ accessories " " " " " Valve will accept full-size cutter Valves include tapping accessory kit; if 304 stainless steel bolts are required in tapping accessory kit add to list price: 4" - 6" add $6 8" add $15 10" - 12" add $42 Series 45/C0 PO X PO Full wall ductile iron to C509/C515 Push-on joint ends Ductile Iron less gasket C " C " C " C " C " Special gaskets available upon request at additional charge Series 45/D0 PO X FL Full wall ductile iron to C509/C515 Push-on joint end X Flanged end to ANSI B 16.1 Class 125 Ductile Iron less gasket D " D " D " D " D " Special gaskets available upon request at additional charge
7 Products for water according to Price list 2008 Series 45/10 IPS GR X GR Grooved ends (IPS) to C606 body Size 3"-8" " " " " Gate valves Series 45/20 IPS GR X FL Grooved end (IPS) to C606 X Flanged end to ANSI B16.1 CLASS 125 body Size 3"-8" " " " " Series 45/70 DI GR X GR Grooved ends (DI) to C606 body Size 3"-8" " " " " Series 45/80 DI GR X FL Grooved end (DI) to C606 X Flanged end to ANSI B16.1 CLASS 125 body Size 3"-8" " " " "
8 Products for water according to Price list 2008 Gate valves Series 55/50 Flanged ends to ANSI B 16.l, class 125 or Mechanical joint end Size 18"- 24" FL X FL " " " FL X FL Includes PowerSaver " " " MJ X MJ " " " MJ X MJ Includes PowerSaver " " " CAUTION: 14"-24" discount applies. Large Diameter Gate Valve Options Bevel Gears 14" add " add " add " add " add 3456 Spur Gears 14" add " add " add " add " add 3074 Bevel Gears and Spur Gears available for smaller sized gate valves. Please call for pricing
9 Products for water according to Price list 2008 Series 66/00 Gate valve with PE-ends (IPS pipe size) SDR11 Series 66/00 Gate valve with PE-ends (DI pipe size) SDR X 4" SDR X 6" SDR X 8" SDR X 10" SDR X 12" SDR Other pipes available, prices on request X 4" SDR X 6" SDR X 8" SDR X 10" SDR X 12" SDR Other pipes available, prices on request Gate valves Accessories Series 66/80 Mechanical Joint Transition fitting for gate valve with PE-ends X 4" X 6" X 8"
10 Products for water according to Price list 2008 Accessories Series 04 Wrench nut Ductile Iron XXX 1"- 2" (for series 03) XXX 2" XXX 2.5"- 4" XXX 6" XXX 8" - 12" XXX 14" - 16" Please specify open left or open right Use Gate Valve Parts discount Series 08 Handwheel for AVK gate valves series 25 and 45 With bolt and washer Grey cast iron Size 1"-16" "- 2" "- 3" " " " " - 12" " - 16" Please specify open left or open right Use Gate Valve Parts discount Mechanical Joint Accessory Kit " " " " " " " " Use Gate Valve Parts discount Tapping Valve Accessory Kit " " " " "
11 Products for water according to Price list 2008 Gate Valve Options: Optional Stainless Steel Fasteners Trade Price Adder Valve Size 316 Complete 316 Exposed Add to valve trade price before discount. Up to 4" " " " " "-16" Optional Valve Stems Trade Price Adder Valve Size Low Zinc Bronze 430F Stainless 316 Stainless Up to 4" No extra Charge No extra Charge P.O.R. 6" No extra Charge No extra Charge P.O.R. 8" No extra Charge No extra Charge P.O.R. 10" No extra Charge No extra Charge P.O.R. 12" No extra Charge No extra Charge P.O.R. 14"-16" No extra Charge No extra Charge P.O.R. Keyed stem with ISO mounting flange P.O.R. Optional Epoxy Coating Requirements Trade Price Adder Coating to exceed mil thickness Add 20% Holiday Free Coating Inside Only Add 20% Holiday Free Coating Outside Only Add 20% Gaskets for Gate Valves and Fire Hydrants IPS Valve PO (C-900) DI Push On to IPS Gasket Pipe Gasket Transition Gasket Size (Part #25-xxx-07) (Part #25-xxx-04) (Part #25-xxx-89) 2" 16 n/a n/a 2.5" 7 n/a n/a 3" 7 n/a n/a 4" " " " n/a " n/a
12 Products for water according to Price list 2008 Check valves Series 41/45 To C508 Swing check valve, resilient seated, flanged ends to ANSI B 16.1, class 125 Size 3"-8" Without lever and weight " " " " With lever and weight " " " " Series 41/50 To C508 Swing check valve, metal seated, flanged ends to ANSI B 16.1, class 125 Size 3"-8" Without lever and weight " " " " With lever and weight " " " "
13 Products for water according to Price list 2008 Series 27/00 To C502 UL listed FM approved Dry barrel hydrant Standard bases available: 6" FL 6" MJ 6" PO 4" FL or 4" MJ Modern style Bury Depth ' or less ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' Note: Trade prices without accessories. For each 6" increase to bury depth over 10' add $38 Fire hydrants Series 27/80 To C502 UL listed FM approved Dry barrel hydrant Standard bases available: 6" FL 6" MJ 6" PO 4" FL or 4" MJ Nostalgic style Bury Depth ' or less ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' Note: Trade prices without accessories. For each 6" increase to bury depth over 10' add $38 Series 27/80-8 Fire hydrant for non-freezing climate Puerto Rico type With 6" flanged, mechanical joint or push-on inlet 200 PSI Bury Depth ' ' ' ' ' ' ' ' ' Series 27/80-8 Hydrants Tools Complete tool kit Seat wrench Operating wrench Oil sleeve
14 Products for water according to Price list 2008 Fire hydrants Series 27/94 To C502 UL Listed/FM Approved Dry barrel hydrant 2 Hose Nozzles ONLY No Pumper Nozzle Standard bases available: 6" FL 6" MJ 6" PO 4" FL or 4" MJ Nostalgic style Bury Depth ' or less ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' Note: Trade prices without accessories. For each 6" increase to bury depth over 10' add $38 Series 27/56 To C502 UL Listed Dry barrel hydrant 2 Pumper Nozzles ONLY No Hose Nozzles Standard bases available: 6" FL 6" MJ 6" PO 4" FL or 4" MJ Nostalgic style Bury Depth ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' Note: Trade prices without accessories. For each 6" increase to bury depth over 10' add $
15 Products for water according to to Price list 2008 Hydrant Options For 8" MJ shoe less accessories add 59 For Straight Inlet add 150 For Monitor Hydrant (specify 3" or 4" flanged outlet) add 700 For Mountain Hydrant (extended upper barrel: 27/00 Modern only) add 250 Handwheel Kit add 200 For Integral Storz Connection 4" add 245 For Integral Storz Connection 5" add 273 Paperweight-size Nostalgic Hydrant 15 Fire hydrants Series 27 Extension Kits " " " " ' " " ' " " Parts numbers above include zinc plated bolts. Other bolt available for additional charge. All extension kits are shipped with 304 Stainless Steel Stem. Series 27 Traffic Repair Kits For Modern 27/ For Nostalgic 27/ For Modern Hydrant Repair Kit, specify color. Part numbers above include zinc plated bolts. Other bolts available for additional charge. For 304 Stainless Steel Bolts add $20 For 316 Stainless Steel Bolts add $40 Series 27 Hydrants Tools Seat Wrench Operating Wrench Oil Sleeve 1 35 Hydrant bolting Options Bolting Below Ground 304 Grade Stainless Steel add Grade Stainless Steel add 90 Bolting Above Ground 304 Grade Stainless Steel add Grade Stainless Steel add 50 Bolting Above & Below Ground 304 Grade Stainless Steel add Grade Stainless Steel add 140 Upper Stem 304 Grade Stainless Steel add Grade Stainless Steel add 63 Lower Stem 304 Grade Stainless Steel add 28 per bury foot 316 Grade Stainless Steel add 34 per bury foot
16 Products for water according to Price list 2008 Fire hydrants Series 24/90 To C503 Wet barrel hydrant Commercial 200 PSI Outlets x 2.5" and 1 x 4" x 2.5" and 1 x 4.5" Series 24/70 To C503 Wet barrel hydrant Residential 200 PSI x 2.5" and 1 x 4" x 2.5" and 1 x 4.5" Series 24/20 To C503 Wet barrel hydrant Dual pumper nozzles Commercial 200 PSI x 2.5" and 2 x 4" x 2.5" and 2 x 4.5" Series 24/60 To C503 Wet barrel hydrant with 6" threaded inlet Wharf 200 PSI x 2.5" and 1 x 4" x 2.5" and 1 x 4.5"
17 Products for water according to Price list 2008 Series 24/42 Wet barrel hydrant 2-Way Stainless Steel 200 PSI x 2.5" and 1 x 4" x 2.5" and 1 x 4.5" Fire hydrants Series 24/52 Wet barrel hydrant 3-Way Stainless Steel 200 PSI x 2.5" and 1 x 4" x 2.5" and 1 x 4.5" Series 24/72 To C503 Wet barrel hydrant Threaded nozzles One pumper and one hose x 2.5" and 1 x 4" x 2.5" and 1 x 4.5" Series 24/80 Breakable flange unit for AVK Wet barrel hydrants Kit; flange section & break ring and bolts Series 24/82 Break ring Repair kit for AVK Wet barrel hydrant breakable flange unit X Kit with bolts included Option: X= 1. Bolts, nuts and washers plated steel 2. Bolts, nuts and washers stainless steel
AWWA, RESILIENT WEDGE GATE VALVES
Type AVK Ref. # Size Weight kg lb US $ Series 04 Wrench nut Ductile Iron Series 08 Handwheel for AVK gate valves series 45, 55, 65 and 66 With bolt and washer Grey cast iron Size 1"-30" Series 18/45/55/65/66
visit us online at
PRICE SHEET (PL-1014-VLV Replaces PL-0513-VLV) TABLE OF CONTENTS VALVES & HYDRANTS Page(s) Product Line Price Sheet 1 AWWA C515 Gate Valves NRS Series 2010 & 1010 PL-1014 Multiplier 2 AWWA C515 Gate Valves
EXPECT SOLUTIONS, NOT JUST PRODUCTS
AVK 2016 PRICE LIST EXPECT SOLUTIONS, NOT JUST PRODUCTS TABLE OF CONTENTS IN DIGITAL VERSION, PAGE NUMBERS ARE LINKED TO PAGES - CLICK ON ANY "Expect AVK" LOGO TO RETURN TO TABLE OF CONTENTS 2 TABLE OF
GENERAL FEATURES / SPEC M&H AWWA C502 FIRE HYDRANTS Style 929 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approval Type: Compression type, opening against line pressure.
FIRE PROTECTION PRODUCTS
SUPER CENTURION FIRE HYDRANT Mueller Super Centurion Fire Hydrant Since its introduction in 1976, millions of Centurion fire hydrants have been installed throughout North America. There are a number of
Mueller Super Centurion 250 Fire Hydrant
Mueller Super Centurion 250 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 250 Fire Hydrant...250 psig rating, high flow, dependable performance,
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION TESTING AND DESIGN SPECIFICATIONS (PER AWWA C502 / NSF /ULC & FM) 1. Hydrant shall be manufactured in accordance with AWWA C502 latest revision
PRICE SHEET TABLE OF CONTENTS AWWA VALVES & HYDRANTS. (PL-0418-AWWA Replaces PL-1014-VLV)
Page(s) 1 2 3 3 4 4 5 5 6 PRICE SHEET TABLE OF CONTENTS VALVES & HYDRANTS ( Replaces PL-1014-VLV) Product Line C515 NRS Gate Valves Series 1010 UL/FM C515 NRS Gate Valves Series 2010 C508 Swing Check Valves
Water Distribution Solutions
Water Distribution Solutions Table of Contents WaterMaster 5CD250 Fire Hydrants 6 WaterMaster 5BR250 Fire Hydrants 8 FlowMaster Resilient Wedge Gate Valves 11 Valve Boxes 17 Meter Boxes 22 Table of Contents
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
Water Distribution Solutions
Water Distribution Solutions Table of Contents WaterMaster 5CD250 Fire Hydrants 6 WaterMaster 5BR250 Fire Hydrants 8 FlowMaster Resilient Wedge Gate Valves 11 Valve Boxes 17 Meter Boxes 22 Table of Contents
VALVE AND HYDRANT PRICE BOOK
VALVE AND HYDRANT PRICE BOOK HTTP://WWW.CLOWVALVE.COM EFFECTIVE DATE February 10, 2012 CLOW VALVE COMPANY 902 SOUTH SECOND ST. OSKALOOSA, IA 52577 PH# 800-829-2569 FAX# 641-673-8269 CLOW VALVE COMPANY
MUELLER Super Centurion fire hydrants
MUELLER Super Centurion fire hydrants MUELLER SUPER CENTURION FIRE HYDRANT Since its introduction in 1976, millions of Centurion fire hydrants have been installed throughout the world. There are a number
5 1 /4 PACER. It s AMERICAN What We Know. DARLING MARK 73 2 FIRE HYDRANT AMERICAN FLOW CONTROL WATEROUS FIRE HYDRANT
WATEROUS FIRE HYDRANT DUCTILE IRON 250 P.S.I.G. WATEROUS FIRE HYDRANT AMERICAN FLOW CONTROL It s AMERICAN What We Know. DARLING MARK 73 2 FIRE HYDRANT CONSTRUCTION WATEROUS FIRE HYDRANT TWO PIECE OPERATING
American AVK Dry Barrel Hydrant Class Code/ Ref. # / Breakdown
American AVK Dry Barrel Hydrant Class Code/ Ref. # / Breakdown 27A - BBB - C D Series no. Outlets Base Base Size Config. M - Modern NHH - No Pumper, 4-4 Inch E - PE N - Nostalgic 2 Hose Outlets 6-6 Inch
Sentinel 250 Fire Hydrant. Solid design and features to meet any municipal requirement.
Sentinel 250 Fire Hydrant Solid design and features to meet any municipal requirement. Product Features That meet any municipal requirement. 1 Operating Nut Shields the hold down nut from tampering and
Price Book - Section C Valves and Hose Equipment
Effective Date Price Book - Kennedy Valves O.S.&Y. Gate Valve UL/FM Resilient Wedge w/ 3 4" Tap and Plug - Model #4068A 2 2" 2265 $579.00 3" 2266 $669.00 4" 2267 $776.00 6" 2269 $,30.00 8" 2268 $,855.00
MEDALLION HYDRANT. clowvalve.com AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
clowvalve.com MEDALLION HYDRANT AWWA C50 UL LISTED FM APPROVED NSF 6/37 CERTIFIED 50 PSI WORKING PRESSURE 0-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane, Inc. MEDALLION HYDRANT FIRE PROTECTION
AVK SAUDI VALVES MANUFACTURING COMPANY
AVK SAUDI VALVES MANUFACTURING COMPANY AVK SERIES 24 - HIGH PRESSURE, WET BARREL HYDRANT FIELD MAINTENANCE AND INSTRUCTION MANUAL TABLE OF CONTENTS EXPLODED ASSEMBLY / PARTS LIST INTRODUCTION / DESCRIPTION
PIPE OUTSIDE DIAMETER GUIDE
June 7, 2018-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE &
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
EXPECT SOLUTIONS, NOT JUST PRODUCTS
AVK 2016 FIRE PROTECTION PRICE LIST EXPECT SOLUTIONS, NOT JUST PRODUCTS TABLE OF CONTENTS IN DIGITAL VERSION, PAGE NUMBERS ARE LINKED TO PAGES - CLICK ON ANY "Expect AVK" LOGO TO RETURN TO TABLE OF CONTENTS
Price Book - Section C Valves and Hose Equipment
Kennedy Valves O.S.&Y. Gate Valve UL/FM Resilient Wedge w/ 3 /4" Tap and Plug - Model #4068A 2 1 /2" 2265 $743.00 3" 2266 $858.50 4" 2267 $996.00 6" 2269 $1,449.00 8" 2268 $2,379.00 10" 2264 $3,891.00
ADMIRAL HYDRANT. clowvalve.com
clowvalve.com ADMIRAL HYDRANT AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 350 PSI WORKING PRESSURE AVAILABLE 10-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane,
AMERICAN FLOW CONTROL 4 3/4 WATEROUS TREND FIRE HYDRANT
AMERICAN FLOW CONTROL 4 3/4 WATEROUS TREND FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available UL Listed and Approved by FM Approvals in applicable configurations. DUCTILE IRON
American Flow control Series 2500
American Flow control 14-66 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Lifting DEVICES 14-66 Valve is constructed of high-strength
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY 129 HYDRANT YESTERDAY, TODAY, & TOMORROW For more than 85 years, the M&H
AMERICAN FLOW CONTROL 4 3/4 WATEROUS TREND FIRE HYDRANT
AMERICAN FLOW CONTROL 4 3/4 WATEROUS TREND FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available Listed by Underwriters Laboratories Inc. and Approved by FM Approvals in applicable
EXPECT RELIABILITY AVK RESILIENT SEATED GATE VALVES
EXPECT RELIABILITY AVK RESILIENT SEATED GATE VALVES AVK VALVES STANDARD FEATURES AVK STANDARD FEATURES AVK Gate Valves are made of ductile iron and meet or exceed AWWA C509 or C515 ASTM A582 stainless
Rev. 2/16 MUELLER Fire Hydrant Reference Manual Mueller Co. Printed in the U.S.A.
Rev. 2/16 MUELLER Fire Hydrant Reference Manual 2016 Mueller Co. Printed in the U.S.A. Index 1 Fire Hydrant Reference Material Index Index...1 Identification...2-36 Dry Barrel Hydrants - AWWA...3-21 Dry
AVK UL LISTED AND FM APPROVED PRODUCT RANGE FIRE PROTECTION SOLUTIONS
AVK UL LISTED AND FM APPROVED PRODUCT RANGE FIRE PROTECTION SOLUTIONS FIRE PROTECTION SOLUTIONS FROM AVK AVK place paramount importance on forming long term partnerships with its customers. We recognise
VALVES, FIRE HYDRANTS, AND APPURTENANCES
VALVES, FIRE HYDRANTS, AND APPURTENANCES PART 1 - GENERAL 1.01 SECTION INCLUDES A. Butterfly Valves B. Gate Valves C. Tapping Valve Assemblies D. Fire Hydrant Assemblies E. Flushing Devices (Blowoffs)
American Flow control 5 1/4 b-84-b-5
American Flow control 5 1/4 b-84-b-5 Fire Hydrant FLOW CONTROL Construction Fully complies with AWWA C502 and is available UL Listed and FM Approved in applicable configurations. one-piece bronze OPERATING
SECTION 8 Fire Protection
Bronze Wet Barrel Fire Hydrants With over 100 years of experience on the west coast the heart of the wet barrel market James Jones Company, LLC is the innovator in the bronze wet barrel hydrant industry.
September 2012 / M&H C502 / Model 129
GENERAL FEATURES / GENERAL SPEC M&H AWWA C502 FIRE HYDRANTS Model 129 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approved Type: Compression type, opening against line
Series 1500TD Bell Restraint Harness for Ductile Iron & C900 PVC Pipe Split Serrated Restraint Rings on Both Sides of the Bell
Series 00TD Bell Restraint Harness for Ductile Iron & C900 PVC Pipe Split Serrated Restraint Rings on Both Sides of the Bell Features and Applications: Restraint for Ductile Iron Pipe at Push- On Bells,
K81-D FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-D FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J L M K N P Q S R
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
Trend Hydrants. Installation, Operation, Maintenance and Overhaul Instructions. Table of Contents. Illustrations. Tables H /16/10 12/04/95
Installation, Operation, Maintenance and Overhaul Instructions Form No. H-351 Date 12/04/95 Revision Date 02/16/10 Trend Hydrants New Style Trend Old Style Trend Model WB77 Wet Top Model WT77 Dry Top Model
MUELLER Hydrant Security Device
MUELLER HYDRANT DEFENDER SECURITY DEVICE 9A. Rev. 8-04 When conducting a vulnerability assessment (V.A.), infiltration of a municipal water supply through an unsecured fire hydrant should be a primary
K81-DD FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-DD FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J K M L N P Q S R
5 1/4 AMERICAN-DARLING B-84-B-5 FIRE HYDRANT BY AMERICAN FLOW CONTROL
5 1/4 AMERICAN-DARLING B-84-B-5 FIRE HYDRANT BY AMERICAN FLOW CONTROL CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available UL Listed and FM Approved in applicable configurations. ONE-PIECE
AMERICAN FLOW CONTROL 5 1/4 B-84-B-5 FIRE HYDRANT
AMERICAN FLOW CONTROL 5 1/4 B-84-B-5 FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available Listed by Underwriters Laboratories, Inc. and Approved by FM Approvals in applicable configurations.
TABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
AMERICAN FLOW CONTROL 5 1/4 B-62-B-5 FIRE HYDRANT
AMERICAN FLOW CONTROL 5 1/4 B-62-B-5 FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available UL Listed and Approved by FM Approvals in applicable configurations. ONE-PIECE BRONZE
AWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2
OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
OPERATION AND MAINTENANCE MANUAL 2-66 SERIES 2500 RESILIENT WEDGE GATE VALVE
OPERATION AND MAINTENANCE MANUAL 2-66 SERIES 2500 RESILIENT WEDGE GATE VALVE INDEX SERIES 2500 DUCTILE IRON RESILIENT WEDGE GATE VALVE OPERATION and MAINTENANCE MANUAL. OPERATION AND MAINTENANCE Operation,
MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
Data Sheet Issue A
General Description The Rapidrop Fig 601/602 dry barrel post / flushing fire hydrant is designed to be a trouble free, easy to maintain hydrant. The Fig 601/602 fire hydrant is rated for a working pressure
American Flow control 5 1/4 B-62-B-5
American Flow control 5 1/4 B-62-B-5 Fire Hydrant FLOW CONTROL Construction Fully complies with AWWA C502 and is available UL Listed and FM Approved in applicable configurations. one-piece bronze OPERATING
516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
FIREFLO - MODEL F-06 INSPECTION, INSTALLATION & MAINTENANCE MANUAL. Item No.s/Description
FIREFLO - MODEL F-06 INSPECTION, INSTALLATION & MAINTENANCE MANUAL Item No.s/Description Item No. Description Material Specification HYDRANT Qty. Req d Item No. Description Material Specification 1 Operating
MATERIAL SPECIFICATIONS AND BID PROPOSAL SHEET
CATEGORY 1: STEEL COUPLINGS 0 ¾" Steel Couplings (Smith-Blair #411-0501-003) 20 1" Steel Couplings (Smith-Blair #411-013201-003) 20 1¼" Steel Couplings (Smith-Blair #411-016601-003) 20 2" Steel Couplings
Water, Sewer & Drain Fittings
Why Compact? Compact Joint are manufactured from a high strength, impact resistant ductile iron that offers a great margin of safety against service failures and provides vastly increased resistance to
TYLER UNION. Quality Waterworks Products. PC-2017, March, REGISTERED FIRMISO 9001:2015. Tyler Union
TYLER UNION Quality Waterworks Products WATERWORKS CATALOG PC-2017, March, 2017 www.tylerunion.com 10014257 U L REGISTERED FIRMISO 9001:2015 CERTIFIED Tyler Union 11910 CR 492 TYLER, TEXAS 75706 (800)
British Standard Underground Hydrant Range
AVK UNDERGROUND HYDRANTS British Standard Underground Hydrant Range THE AVK BRITISH STANDARD HYDRANT RANGE AVK are the renowned market leading innovators, manufacturers and suppliers of BS 750 fire hydrants
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
Suggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
Utilities Catalog. PC-U2008, February, 2008
Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page
PRESSURE UTILITIES. Pipe flow occurs due to contents of the pipe being pressurized System cannot have a free connection to the atmosphere
PRESSURE UTILITIES Pipe flow occurs due to contents of the pipe being pressurized System cannot have a free connection to the atmosphere Types of Pressure Utilities Domestic Water: Clean/drinkable water
2-6 FIRE HYDRANT---(MODEL ½ & 5 ¼
M&H PDF PAGE INDEX Page PRODUCT 2-6 FIRE HYDRANT---(MODEL 129 4 ½ & 5 ¼ ) 7 How to Order Fire Hydrants 8 FIRE HYDRANT WARRANTY 9-13 FIRE HYDRANT---(MODEL 929 5 ¼ ) 14-18 FIRE HYDRANT---(POST HYDRANT 2
of wet barrel hydrants, hydrant valves and hydrant tools.
JONES WET BARREL FIRE HYDRANTS The most complete selection of wet barrel hydrants, hydrant valves and hydrant tools. Bronze wet barrel fire hydrants Jones is the leader. With over 100 years of experience
Figs. 800 Verticle, 800 W. Fig. 800 Vertical Type Fig. 800 W. Wall type.
Indicator Posts Indicator posts are controls, extending aboveground, for operating underground sprinkler system valves. As an important feature of their design, a target or indicator, visible through an
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS 834.1 DESCRIPTION: This item shall consist of fire hydrant installations using joint restraints in accordance
THE DEFENDER 4D-200 SERIES
THE DEFENDER 4D-200 SERIES SPECIFICATIONS The Reduced Pressure Principle Assembly shall protect against backflow by either backpressure or back-siphonage from a crossconnection between potable water system
AMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE
AMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE CONSTRUCTION STAINLESS STEEL PIPE PLUG Allows installation of pressure gauge. STAINLESS STEEL FASTENERS Helps provide corrosion resistance.
AVK FIRE PROTECTION FIRE DOESN T COMPROMISE NEITHER SHOULD YOU
AVK FIRE PROTECTION FIRE DOESN T COMPROMISE NEITHER SHOULD YOU LET S MAKE A DIFFERENCE WHEN EVERY SECOND COUNTS Firemen depend fully on valves and hydrants that function perfectly, since they are installed
FIRE HYDRANTS. Wet Barrel Fire Hydrants
FIRE HYDRANTS Wet Barrel Fire Hydrants Jones Wet Barrel Fire Hydrants With over 100 years of experience on the west coast the heart of the wet barrel market James Jones Company is the innovator in the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
INSERTA VALVE SLEEVE INSERTA VALVE ASSEMBLY. Valve insertion, simplified MATERIAL SPECIFICATIONS MATERIAL SPECIFICATIONS.
MADE IN U.S.A. Valve insertion, simplified 10-12 installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than 2 hours Much
InsertaValve Sleeve. InsertaValve Valve Assembly. Valve Insertion, simplified. Material Specifications. Transmate InsertaValve
Material Specifications Material Specifications Sleeve 10" - 12" installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than
OPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM
FLOW CONTROL PRODUCT PROGRAM World Valve Wouter Witzel 1 FLOW CONTROL l PRODUCTS CONTENT: FLOW CONTROL 4-5 BUTTERFLY VALVES 6-7 BALL VALVES 8 GATE VALVES 9 ACTUATED VALVES, SWITCH BOXES & ACCESSORIES 10-11
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
AUTOMATION ACCESSORIES IN-PLANT VALVE PRODUCTS EXTENSION STEMS FLOORBOX STEM GUIDES FLOORSTANDS COMMITTED TO ENVIRONMENTAL RESPONSIBILITY FLAP VALVES
INCREASING SWING CHECK VALVES FLAP VALVES SWING CHECK VALVES AUTOMATION ACTUATION CLOW VALVE has furnished valves with many assorted types of motorized to operate our valves. The gate valves use multi-turn,
AVK product programme. Expect A taste of AVK
AVK product programme Expect A taste of AVK AVK - your long-term partner AVK has been in the valve business for more than 40 years. Today AVK is a global leader within valves, hydrants, fittings and accessories
Harlingen Water Works System Approved Products List For Subdivisions. January 11, 2005
Harlingen Water Works System Approved Products List For Subdivisions January 11, 2005 Revised March 24, 2016 Harlingen Water Works System Approved Products List for Subdivisions Table of Contents: 1. Valves
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY 129 HYDRANT YESTERDAY, TODAY, & TOMORROW For more than 85 years, the M&H
TABLE OF CONTENTS. 3 Outlet Stainless Steel Body. 3 Outlet Ductile Body. 2 Outlet Ductile Body 2 Outlet Bronze Body
AVK SERIES 24 - HIGH PRESSURE, WET BARREL HYDRANT FIELD MAINTENANCE AND INSTRUCTION MANUAL TABLE OF CONTENTS EXPLODED ASSEMBLY / PARTS LIST INTRODUCTION / DESCRIPTION RECEIVING AND STORAGE INSTALLATION
DIMENSIONS (approximate)
Page 1 of 8 a NRS GATES OS&Y GATES company Model 48 Resilient Wedge Gate Valve SPECIFICATION SUBMITTAL SHEET FEATURES Sizes: 2 1/2" 3" 4" 6" 8" 10" 12" Maximum working water pressure 200 PSI Maximum working
StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines
Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
Water when you need it!
Water when you need it! AVK Belgium n.v. It s all about constraining fire with water! Safety comes first don t compromise on the quality. AVK ensures a reliable water supply. We offer quality products
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION WATER DISTRIBUTION VALVES
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION 33 12 16 WATER DISTRIBUTION VALVES PART 1 GENERAL... 2 1.1 Description... 2 1.2 Reference Specifications, Codes, and
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
EXPECT TOP QUALITY VALVES AND HYDRANTS
AVK FIRE PROTECTION EXPECT TOP QUALITY VALVES AND HYDRANTS WHEN EVERY SECOND COUNTS COUNT ON AVK VALVES AND HYDRANTS INTERNATIONAL SAFETY APPROVALS INCLUDED Safety comes first don t compromise on quality.
INDEX WATEROUS 5 1/4 IN. PACER FIRE HYDRANT
INDEX WATEROUS 5 1/4 IN. PACER FIRE HYDRANT PAGE INTRODUCTION AND HISTORY............................................................. 2B 2 ORDERING Dimensions: Overall Hydrant...............................................................
Fire Protection Indicator Post
The 813 Series Indicator Post is designed to operate non-rising stem gate valves used in the control of underground water supply for automatic sprinklers, water spray deluge, foam-water deluge, and standpipe
PROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
APPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17**
APPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17** SIZE DESCRIPTION MANUFACTURER & MODEL NUMBER CORPORATION STOPS 1" MIP x GRIP Comp ball corp stop Ford: FB 1100-4Q McDonald: 74704-BQ
ND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
Super Centurion Hydrants Designed for efficient flow and outstanding, long-term reliability
Super Centurion Hydrants Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion Fire Hydrants High flow and dependable long time performance. 1 Hold-down nut Features
1. Valves shall conform to the latest version of AWWA Standard C-509 covering Resilient Seated gate Valves for Water Supply Service.
KENNEDY KENNEDY VALVE MODEL VALVE KS-RW 1. Valves shall conform to the latest version of AWWA Standard C-509 covering Resilient Seated gate Valves for Water Supply Service. 2. The valves shall have a cast
HP250II AND HP250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901
H250II AND H250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS RATT H250II Scope of Line... 1 Design and Construction Details... 1 ipe Mating Chart... 1
AMERICAN AVK COMPANY AVK SERIES 24 - HIGH PRESSURE, WET BARREL HYDRANT FIELD MAINTENANCE AND INSTRUCTION MANUAL TABLE OF CONTENTS
AMERICAN AVK COMPANY AVK SERIES 24 - HIGH PRESSURE, WET BARREL HYDRANT FIELD MAINTENANCE AND INSTRUCTION MANUAL TABLE OF CONTENTS EXPLODED ASSEMBLY / PARTS LIST INTRODUCTION / DESCRIPTION RECEIVING AND
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000