GTK 80. Technical data
|
|
|
- Frederica Norris
- 5 years ago
- Views:
Transcription
1 Industrial square suspension system with open cable duct for heavy loads Modular construction with free accessible cable duct Floor, top-mounting or wall exit options Technical data Material: connecting tube: square ST 37 similar to DIN EN , wall thickness 5 mm and/or 8 mm components: spheroidal graphite cast iron and/or cast aluminium cable duct / cover: aluminium extruded profile bearing: ball bearing bellow: textile fabric Seal: CR and/or NBR Painting: powder coating Colour: cable duct / cover: RAL 7035, light grey components: RAL 7043, traffic grey B special colour on request Included in delivery: Individual system components incl. cable duct covering and assembly materials Ingress protection: IP 65 to EN on with connection of top-mounting flange/ enclosure Free cable passage: 57 cm² 105
2 Product range Order No. Weight (kg) Top-mounted joint Foot stand / wall flange Wall hinge Intermediate joint Angle (FH) cast iron Angle (AS) aluminium Angle coupling Coupling Top-mounting flange type A Top-mounting flange type B Cable duct (standard length to fit relevant suspension tube) Weight (kg) Suspension tube 80 x 80 x 5 mm Weight (kg) Suspension tube 80 x 80 x 8 mm Weight (kg) Standard length: 0.5 m Standard length: 1 m Standard length: 2 m Standard length: 3 m Variable length (please specify) * * The cable duct needs to be 175 mm shorter than the suspension tube length! Load diagram Note: the vertical length of the profile is responsible for the load of the complete suspension system (lever arm!). Further information for this on request. The values in the above load diagram are gulty to an execution hanging or standing. The declarations of weight are a summary from installation weight, COMMANDER and all components and tubes between COMMANDER and angle. Added system elements 106
3 Top-mounted joint Cast iron. Fastening and adjustment on suspension tube with olive rings. Permanent easy-running ball bearing. Friction force of swivel movement is adjustable. Easy cable routing thanks to open cable duct. Swivelling range approx. 360 Order No Foot stand/wall flange Cast iron. Fastening and adjustment on suspension tube with olive rings. Mounting options: Vertical (foot stand), horizontal (fixed wall mounting) or hanging (ceiling mounted). Easy cable routing thanks to open cable duct. Order No
4 Wall hinge Cast iron. Fastening and adjustment on suspension tube with olive rings. Permanent easy-running ball bearing. Friction force of swivel movement is adjustable. Easy cable routing thanks to open cable duct. Dust protection with woven bellow. Swivelling range approx. 180 Order No Intermediate joint Cast iron. Fastening and adjustment on suspension tube with olive rings. Permanent easy-running ball bearing. Friction force of swivel movement is adjustable. Easy cable routing thanks to open cable duct. Dust protection with woven bellow. Swivelling range approx. 180 Order No
5 Angle (FH) Cast iron. 90 angle for use with high bending loads. Fastening and adjustment on suspension tube with olive rings. Additional safety screws for high vertical tensile loads. Easy cable routing thanks to open cable duct. Order No Locking screw Angle (AS) Cast aluminium 90 angle for vertical construction from the bottom up with minimal bending load. Fastening and adjustment on suspension tube with olive rings. Easy cable routing thanks to open cable duct. Order No
6 Coupling Cast aluminium Large surface flange mounting on enclosure. Fastening and adjustment on suspension tube with olive rings. Permanent easy-running ball bearing. Swivel movement friction force can be adjusted with clamping lever. Easy cable routing thanks to open cable duct. Swivelling range approx. 320 Caution: Custom flange fastening available for extremely heavy duty work! Order No Locking screw M6/12 depth Angle coupling Cast aluminium. Combination of coupling and angle. Large surface flange mounting on enclosure. Fastening and adjustment on suspension tube with olive rings. Permanent easy-running ball bearing. Swivel movement friction force can be adjusted with clamping lever. Easy cable routing thanks to open cable duct. Swivelling range approx. 320 Caution: special flange fastening available for extremely heavy duty work! Order No M6/12 depth 110
7 Top-mounting flange Fitted in combination with coupling or angle coupling to maintain compliance with enclosure rating IP 65 at transition to control panel. Type A: Cast aluminium Large area mounting on enclosure for maximum 3 ready-made leads with diameters from 7 to 26 mm. Open cable entry. Type B: Cast aluminium Large area mounting on enclosure for a large number of ready-made leads. Sealed with special cable glands or threaded cable connectors. Open cable entry. Type A: Order No Type B: Order No Type A M6/12 depth Type B 111
The new BERNSTEIN Aluminium Suspension System
CS-3000 next Suspension Systems The new BERNSTEIN Suspension System The CS-3000 next combines functionality with an appealing design. The new system is an important addition to the CS-3000 series, it is
RK Monitor Mounting... page 254. GT page 264. GT 50, 60, page 274. Support arm / equipment carrier system
Support arm / equipment carrier system RK Monitor Mounting... page 254 GT 48... page 264 GT 50, 60, 80... page 274 Support arm / equipment carrier system RK Monitor Mounting All purpose mounting for monitors,
Applications Profitronic 19 / Profitronic 19U
Applications Profitronic 19 / Profitronic 19U 54 Enclosure in variable length version using profile technology Standard construction or version with connection compartment Optional Polycarbonate transparent
Heavy-Duty Suspension System CS-2000 System 80
Heavy-Duty Suspension System CS-2000 System 80 With its large number of components, the BERNSTEIN CS-2000 System 80 suspension system offers technically perfected solutions for a wide range of applications.
Construction Enclosure coupling and elbow coupling fittings are die-cast from G AL SI 12 aluminum. Suspension tubing is steel.
Tara Plus Measurement Conversions 1 kg = 9.81 N 1 lb = 4.44 N e.g. 500 Newtons = 51 kg = 112.4 lbs 300 Newtons = 30.6 kg = 67.4 lbs 100 Newtons = 10.2 kg = 22.5 lbs 1 foot = 0.305 m Application Taraplus
Suspension System CS-3000
Suspension System CS-3000 Straight coupling Elbow coupling (colour) 1015300177 RAL 9006 white aluminium 1015300001 RAL 16 anthracite grey 101530017 RAL 9006 white aluminium 1015300002 RAL 16 anthracite
Factor 3) Max. input torques Flange 38 GS : F ,000 F10 F ,000 F12 82:
Duty class 1 1) Mor open in accordance with EN 15714-2. Valve output Valve attachment Gearboxes Reduction Facr 3) rque 2) Turns for 90 Gearboxes Input shaft Input mounting flange for multiturn actuar input
Factor 2) 160:1 6) /(30) FA10 (FA14) :1 6) /(30) FA10 (FA14) 27 86
to [ft-ib] Valve Max. valve Valve attachment Gearbox Reduct. torque 1) Modulating torque 4) to [ft-ib] Flange acc. to MSS SP 101 Factor 2) Turns for 90 Gearboxes Input shaft Input mounting fl ange for
Suspension Systems. Quality Commitment
Suspension Systems Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
Sewage transport Submersible pumps
Series description Wilo-Rexa FIT Available from January 2012 Construction Submersible sewage pump with cast iron hydraulics and stainless steel motor Type key Example: Wilo Rexa FIT V06DA-110/EAD1-2-T0015-540-A
Product Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
The BERNSTEIN CS-3000
Flexible and efficient: The BERNSTEIN CS-3000 Designers and manufacturers expect modern suspension systems to feature variable configuration, progressive design and complete ease installation. BERNSTEIN
Profitronic I. Technical data
Profitronic I Aluminium electronic enclosure for telecommunication and MCR technology Variable length version using profile technology Screw-down fins integrated into sides Different lid versions depending
IP54 Floor Standing & Wall Mounted Cabinets
IP54 Floor Standing & Wall Mounted Cabinets Our IP54 Style cabinets are designed to be used in areas of high dust levels and damp environments. They are available in 12U, 27U & 42U in widths/depths of
Rittal CM Compact System Enclosures
Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details... 3 5 Compact system enclosures
MTF. Technical features
Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V, 60Hz and 200-240V, 50Hz ( types are supplied without capacitor); suitable for use with an inverter from 20Hz
Aluminium Productive Fence System 40 PRODUCT CATALOGUE
11 2017 (e) Aluminium Productive Fence System 40 PRODUCT CATALOGUE solutions by F.EE Elektrotech Engineering Automation Robotik Informatik + Systeme Energietechnik F.EE GmbH In der Seugn 10 and 20 D-92431
Traffic Guidance Signs Type TGS and Retrofit-Kit
LED Airport Lighting Brief-Information Traffic Guidance Signs Type TGS and Retrofit-Kit Reduced CO 2 emmision by up to 85 % Up to 50,000 hrs LED service life Reduce maintenance and repair by up to 70 %
Actuators for air dampers and control valves of oil burners
7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100
GEARBOXES for operation of industrial valves
GEARBOXES for operation of industrial valves TECHNICAL DOCUMENTATION 2018 Part-turn gearboxes GS 50.3 GS 250.3 GS 50.3 GS 250.3 with base and lever GS 315 GS 500 GS 630.3 GHE 05.1 GHE 12.1 Multi-turn gearboxes
JdB cassette. Version 1.03 Sun Protection AVZ 3J.1
Version 1.0 Sun Protection AVZ J.1 J.2 Sun Protection AVZ Version 1.0 4211 424-000 Alu wall bracket JdB 95 mm Mill finish 4211 424-006 Idem RAL 9010 pure white 4211 424-755 Idem (* = Textured) RAL 7016
Profile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
Factor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :
![Factor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :](/thumbs/93/112621325.jpg "Factor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :")
Nominal Max. valve 4) Valve Valve attachment Type Reduction ratio EN ISO 5210 Factor 1) Nominal Gearbox Max. input s Input shaft 2) Weight 3) Option DIN 3210 Option [kg] 120 60 GK 10.2 1:1 0.9 135 66 20
Standard Hoods/Housings Han B Size 24 B
Standard / Han B Size 24 B Metal hoods/housings for industrial applications / 2 lever locking system 19 30 024 1521 1 x 25 19 30 024 1522 1 x 32 19 30 024 0527 1 x 32 19 30 024 0528 1 x 40 angled entry
Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches
FEET PA 00.0 076/ 0 - PA, grey - Anti-skid insert NBR - All bolts are suitable for all plates Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors
Knürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
stainless steel Cover hinge The cover hinge is simply screwed to the box protection channel and to the edge fold. Model No. KL
aus HB, S. 46 The Rittal range of terminal boxes offers 44 practical designs, developed and improved in constant dialogue with users. Whether with or without gland plates, in stainless steel, EMC version
Azur SG2400. Mounting bar awning SG2400. Description. Options:
Azur Description One-piece, corrosion-resistant square mounting bar (35 x 35 mm) made of galvanised steel for erection of aluminium arm supports, brackets and roller tube. Brackets can be used for wall
Rondelec Armoire de trottoir
Catalogue Rondelec Armoire de trottoir Magasin et showroom : Rue du Pré-de-la-Fontaine 19 117 Meyrin (Satigny) Service h/7j au 0 33 3 7 et sur www.fecsa.ch System Advantages n Flexible and all purpose
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Mixing or diverting valves for heat transfer applications using organic media
Glass Reinforced Polyester Enclosures
42 The GRP range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates,
Reduction ratio. Factor 1)
Max. valve torque to [Nm] 90,000 63,000 125,000 125,000 64,000 250,000 250,000 Valve Flange according to EN ISO 5211 F40 200 F48 250 F60 315 Gearbox/primary Factor 1) Gearbox Turns for 90 Input shaft 2)
max 3.5 m external group installation
Properties: Cassette made of round-shaped extruded aluminium Cable guides made of stainless steel 10 mm diameter Wide range of fabrics Access to revision from the front of the system Electrical drive Dedicated
Welcome to BOPLA City! ENCLOSURE SERIES
Welcome to BOPLA City! ENCLOSURE SERIES Welcome to BOPLA City! By introducing INTERTEGO, Bopla is adding a medium-sized series to its range of desktop enclosures. Two of INTERTEGO s main features are its
Technical data. Material e-reinforced polyester in grey or black. Seal Neoprene (CR) round cord (siliconized)
BERNSTEIN Series CP and CPS polyester enclosures are produced from highgrade e-reinforced polyester. Thanks to their reduced surface resistance (Ro < 109 Ohm), the black polyester enclosures meet the requirements
Apparatus which gives off arcs or sparks can be integrated in distributions at low cost using flameproof enclosures. Built-in electrical components
E X - D D I S T R I B U T I O N S with metal EJ enclosures for gases in explosion group IIB Apparatus which gives off arcs or sparks can be integrated in distributions at low cost using flameproof enclosures.
Compact Sheet-Steel Light Fittings Series 6114
> As 1-, 2- oder 3-lamp version > Versions Pendant fitting Wall-mounting fitting Flush mounted fitting > Powder-coated steel or stainless steel > Central lock > All pole disconnection via NC switch in
Empty enclosures IEC 62208
374 www.hensel-electric.de/en in accordance with for customized solutions and individual applications for example for low-voltage switchgear and controlgear assemblies i n accordance with the IEC 61439-series
Number of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
Roller blind systems. Model 590H Roller blind power operated metal mechanism 590H. Interior shading
Interior shading Roller blind systems Model 590H Roller blind power operated metal mechanism 590H Roller blind systems with side chain or power mechanism. Optima roller blind shading systems are a particularly
Kaedra Weatherproof DIN Type Enclosures
Multi 9 System Catalog Section 6 Additional System Devices Kaedra Weatherproof DIN Type Enclosures Applications Expandable enclosures for service, industrial, or equipment applications Protects against
Product features & Overview. KA Linear actuators
Product features & Overview Linear actuators 66 Linear actuators Linear actuator Product features Wide range of force outputs Solid metal housing Large stroke range Maintenance-free gearbox Wide range
Scope of delivery: Lid and base, fixing screws, RO versions with aluminium front panel, 4 rubber feet.
Futura / Portas These flat control or keypad enclosures were designed especially for EDP workplaces and according to ergonomic guidelines. In these product series you will find enclosures with a ball-of-the-thumb
Factor 1) Modulating torque 4) [Nm]
![Factor 1) Modulating torque 4) [Nm]](/thumbs/74/70996135.jpg "Factor 1) Modulating torque 4) [Nm]")
Nominal Max. valve Modulating 4) Valve Valve attachment Gearbox Reduction ratio Standard EN ISO 5210 Factor 1) Nominal Gearbox Max. input s Modulating Input shaft 2) Weight 3) Option DIN 3210 Standard
Internorm Stil. Colour: White aluminium, similar to RAL 9006 and anthracite grey, similar to RAL Protection class: IP 20/DIN EN 60529
Internorm Stil Detailed product information can be found on www.bopla.de - 2 heights - 3 widths - 5 depths - With or without integrated ventilation - Tower enclosure in 2 sizes - Internorm Stil is based
Flush mounting enclosures. Pragma UP
Flush mounting enclosures Presentation Flush mounting enclosures The appearance of this enclosure, its mechanical strength and its level of electrical safety make it a product fully suitable for residential
LED safety Luminaries
LED safety Luminaries LED safety luminaire 5 years guarantee on LEDs INOTEC LED Safety luminaires high light output and variable SN 6204 LED SN 8141.1 LED SN 9024 LED Technical data SN 6101 LED SN 9141.1
Die changing technique
Die changing Die changing 8 Contents Product group 8 Roller bar, hydraulically lifted for heavy loads (400 bar), lifting of the complete roller bar for medium loads (120 bar), lifting of individual rollers
Hints. 1) Han-Modular Inserts. See: HARTING Industrial Connectors Han, chapter 06. 2) Han-HC contacts
Features Split hood for easy assembly Separate assembly panels for Han HC Modular and Han-Modular offer variable mounting options Hood and surface mounted housing with external PE termination Ideal as
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Control valves for heat transfer applications using organic media according to
Ordering designation: G(Type) - (Stroke) - (Eye bolt) - (Cable length) - (Options) Legend:
General technical data: 1.) Anodised aluminium housing with a connecting rod made of aluminium (in the case of motor types G..B, G..C, G..D and G..E, the connecting rod is Ø18, for all other motor types
Actuators for air dampers and control valves of oil burners
7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100
Valve attachment Gearbox Reduction ratio :1 5) : ,
Nominal Max. valve 4) Valve Valve attachment Gearbox Standard EN ISO 5210 Option DIN 3210 120 60 GST 10.1 250 120 GST 14.1 Nominal Max. input s Gearbox Factor 1) Input shaft 2) Weight 3) Standard [mm]
600 SWINGING FRAME ATTR characteristics. CE-TEK standard epoxy polyester powder coating. Colour: RAL 7032 textured finish.
1 of 9 RACK 19 19 swinging frames 600 SWINGING FRAME Frame manufactured from pressbent rails in 1.5mm sheet steel and 2mm box-shaped horizontal profiles that give high strength. Colour: RAL 7032 textured
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Control valves for heat transfer applications using organic media according
1SLC004001B0202. Enclosures and cable systems overview
1SLC004001B0202 Enclosures and cable systems overview Insulating enclosures and installation material IP40 flushmounting Estetica series IP40 flushmounting Europa series IP40 wallmounting Unibox series
Accessories (additional charge):
ALUBOS Thanks to their versatility and the comprehensive range of accessories, these robust, attractive enclosures can be used for a wide range of applications. With its eye-catching visual design, which
varioflex 19 network & server cabinets, 600, 800 mm width - 600, 800, 1000 mm depth
varioflex 19" Network & Server Cabinets Maximum stability and flexibility Tempered safety glass front door Server cabinets with perforated doors Easy cable management possible Abstract varioflex 19 network
OUR VISION STAINLESS STEEL MILD STEEL MODULAR FLOOR STANDING NON METALLIC P F BLACKBURN SOUTH VIC 3130
Excalibur REAZ AUSTRALIA Enclosures PTY LTD 59 P.O. Northville BOX 2340 Drive Barnsley NSW 2278 BLACKBURN SOUTH VIC 3130 T - 03 9878 4141 sales@reaz.com.au EX-EC/S General Purpose Wall Mount Enclosures
INDUSTRIAL LIGHTING TAURIS MODEL NUMBER F220 TAURIS 2 MODULE F221 TAURIS 3 MODULE F222 TAURIS 4 MODULE SPECIFICATIONS HOUSING : LM 6 die cast aluminium and extruded aluminium. LIGHT SOURCE : The fitting
Fiberglass Enclosures
Fiberglass Enclosures FIBREGLASS ENCLOSURES quadri in vetroresina IP66 FIBreGLASS ENCLOSURES J 7 sizes J Modular and adjustable frame J Din rails adjustable in height J Removable panels J Robust construction
483 mm (19 ) Server Cabinet Unique Series. Abstract. Features. 1.5 mm strong steel sheet. Load capacity up to 1000 kg. Standard colors grey and black
483 mm (19 ) Server Cabinet Unique Series 1.5 mm strong steel sheet Load capacity up to 1000 kg Standard colors grey and black Large range of equipment available DN-19 SRV-42U-8/12 Abstract 483 mm (19
VIDEO MOTORE TENSIONED
Helgi Europe education@helgi-solutions.com business@helgi-solutions.com www.helgi-solutions.com Matt white canvas with black border version VIDEO MOTORE TENSIONED Electric projection screen with alluminum
Operating Instructions Type MPT 53
Operating Instructions www.turnstiles.us Type MPT 53 Contents 1. Delivery... 2 2. Safety...3-4 3 Description and operation... 5 4. Technical Data 6 5. oundation...6-9 6. Assembly and installation...10-13
Euromas ABS / PC. Colour: Light grey, similar to RAL 7035; special colours on request
Euromas ABS / PC Detailed product information can be found on www.bopla.de - 36 sizes - 19 different M...V0 versions corresponding to UL 94 V0 - All M versions are listed under UL file no. 196 706 - Terminals
YOUR WISH IS OUR COMMAND. Junction boxes. Catalogue-Junction boxes
YOUR WISH IS OUR COMMAND Junction boxes Catalogue-Junction boxes 04 Index Index Hard rubber junction boxes Technical notes Type 1010 Type 1212 Type 1616 Type 1812 Type 2516 Type 1010- Type 2516 Pages 4-8
MTF-E. Technical features
Technical features Power supply Threephase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with a PM inverter from 20Hz to the base frequency with constant torque load profile. Polarity 2 and
CASTORS & WHEELS WDS SECTION 20 - CASTORS & WHEELS. Levelling Castors. Furniture Castors. Stainless Steel & Zinc Plated Brackets.
CASTORS & WHEELS Furniture Castors Nylon Castors Rubber Castors High Temperature Phenlic Resin Castors Stainless Steel & Zinc Plated Brackets Heavy Duty Castors Light Duty Castors Levelling Castors Individual
For air dampers and control valves of oil or gas burners
7 813 Actuators For air dampers and control valves of oil or gas burners SQM33... Electromotoric actuators Torques: - SQM33.4 up to 1.2 Nm nominal output torque - SQM33.5 up to 3 Nm nominal output torque
Cabinets PROLINE. Modifications. Overview Cabinets Climate Control Cases Subracks/ 19" chassis Modules...
Overview... 0 Cabinets Cabinets... 1 Climate Control... 2 Cases... 3 Subracks/ 19" chassis... 4 Modules... 5 41003002 Systems... 6 Power supply units... 7 Backplanes... 8 41096005 41096010 Grid Assembly
2.46. Locking and Security Information. Emergency exit device EN 179. Panic exit device EN New products and systems:
Information Emergency exit device EN 179 The standard cover devices to be used in emergency situations if people are familiar with the emergency exit and whose hardware. In this situation a panic is most
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
ALUMINIUM PROFILE SYSTEM SERIES 40
ALUMINIUM PROFILE SYSTEM SERIES With the basic grid mm (slot 5); mm (slot 6), 16mm, mm and 0mm (slot ). In addition to this, the complete connection technology and a large range of accessories. TABLE OF
Cassette awning markilux 6000
A designer cassette awning that is individually modifiable in both colour and specification. The enormous variety of combinations of both the visual and technical aspects makes this awning unique. Product
Light Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
Knürr DoubleProRack. 19 Stand-Alone Enclosure
Knürr DoubleProRack Knürr DoubleProRack 19 Stand-Alone Enclosure 1.92 to 1.98 1.91 19 Network Stand- Alone Enclosure Strong points Strong points 1.92 19 Stand-Alone Enclosure 1.94 19 Enclosure Without
Sliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings
Ultra 20 Swing Door fitting, door weight up to 20 kg Area of application: Door swings out to the front and to the side when being opened, allowing unlimited access to the cabinet interior, can be used
The cover screws and all other external metal parts are made of stainless steel (AISI 316L). International approvals
E X - J U N C T I O N B O X Plastic version for Zone 1,, 1 and The robust junction boxes made of plastic and light alloy are featured by their simple mounting and installation capability and their design.
Prisma Plus G enclosures IP30, IP31, IP43 enclosures
Prisma Plus G IP30, IP31, IP43 Prisma Plus G IP30, IP31, IP43 Presentation For safe and upgradeable electrical switchboards > Safety of people and property > Continuity of service > Optimization and upgradeability
CAV controllers. Type EN-Ex. For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX)
X X testregistrierung CAV controllers Type Adjustment scale For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX) Rectangular, mechanical self-powered
348,6 HE = U Carrying handles, horizontal
T 8,6 Rittal RiCase 69. ( / 9 ) (E) E = U Technical specifications: Depth: 00, 0, 50 Installation width: 69. ( / 9 ) Installation options: 69. ( / 9 ) slide-in equipment and modular assemblies to IEC 60
BERNSTEIN Aluminium Control Enclosure
BERNSTEIN Aluminium Control Enclosure Protection in its most beautiful form The new Aluminium Control Enclosure Design aspects along with modularity, functionality and ergonomics, are rapidly becoming
CONTEG DATA SHEET. version: SEVEN RACK SERIES RI7 SERIES 19" FREE STANDING RACKS
version: 03-09-2010 CONTEG DATA SHEET RI7 SERIES SEVEN RACK SERIES 19" FREE STANDING RACKS The iseven 19 rack has been designed to provide the user with an unmatched ratio between price, utility value
Threaded resistance thermometer Model TR10-C, with fabricated thermowell model TW35
Electrical temperature measurement Threaded resistance thermometer Model TR10-C, with fabricated thermowell model TW35 WIKA data sheet TE 60.03 for further approvals see page 7 Applications Machinery,
EX-D ENCLOSURES AND DISTRIBUTIONS
EX-D ENCLOSURES AND DISTRIBUTIONS Series GHG made of metal for gases of explosion group IIC To use MCBs, fuses, contactors etc. which give off arcs in potentially hazardous areas, they must be integrated
ACCESSORIES FOR SZE2 CABINETS
ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked
XL³ 400 metal distribution cabinets, free-standing enclosures and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL³ 400 metal distribution cabinets, free-standing Cat. No(s) : 20103/04/05/06/07/08/18/19/23/ CONTENTS PAGE 1. General characteristics...
Technical data/component parts
Technical data/component parts Demag pillar and wall-mounted slewing jib cranes 191214 en GB 203 814 44 714 IS 132 Manufacturer Terex MHPS GmbH Forststrasse 16 40597 Düsseldorf, Germany www.demagcranes.com
Handwheels, handles, position indicators
Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium
Max. stand-by power without accessories Use frequency 100% Max leaf width Motor Motor powered at 36V with encoder Max.
Automated system for NEW Passage opening 700-3.000 mm Max. leaf weight 110-2x70 Kg FAAC SERIES automated systems are intended for the automation of exits in compliance with European Standard EN16005; in
The Rittal Flex-Block base/plinth system
The Rittal Flex-Block base/plinth system 50 Save time Fast assembly by simply clipping together the base/plinth components Easily bayed with toolless baying clip The enclosure is easily transported in
2 CIRCUIT TRACK. Notes: INSTALLATION PROFILE SURFACE TRACK COLOR. Page 1/9. Date :12/06/17 Rev.02 WHITE POWDER COAT SILVER ANODIZED
2 CIRCUIT TRACK SURFACE TRACK COLOR INSTALLATION PROFILE WHITE POWDER COAT SILVER ANODIZED PLASTER FLANGE RECESSED VISIBLE FLANGE RECESSED BLACK ANODIZED Page 1/9 SURFACE TRACK SYSTEM : compose your system
Central battery system ZB-S with STAR technology
Central battery system ZB-S with STAR technology As well as providing a dependable supply of power (30V AC/0 V DC) to safety and exit luminaires, the central battery system ZB-S tests itself automatically
WALL VENTILATION GRILLES CBP
WALL VENTILATION GRILLES CBP 01.10-01 CBP WALL VENTILATION GRILLES Description Designed for ventilation and air-conditioning installations, where control of air flow and direction of the air is required.
CAV controllers. Type EN. For the precise control of normal and high constant volume flows. 01/2017 DE/en PD EN 1
X X testregistrierung CAV controllers Type For the precise control of normal and high constant volume flows Rectangular self-powered volume flow controllers for the control of supply air or extract air
A44 W0...W2: Motorised actuator
A44 W0...W2: Motorised actuator How energy efficiency is improved Electric cut-off in end position to save energy Features Actuation of control units such as air dampers, gates, butterfly valves, etc.
ROSE Systemtechnik GmbH
PRODUCT OVERVIEW 1 ROSE Systemtechnik GmbH The company was founded in 1969 and specializes in the development and production of high quality industrial enclosures, which are used in a variety of environmental
Euromas-Polyester, an enclosure available
Euromas-Polyester 8 Euromas-Polyester, an enclosure available in sizes made of 0% glassbead-reinforced polyester, has been designed to satisfy the highest standards. It makes it possible for the user to
Maintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN
Type Series Booklet 7150.1/9-10 BOA -H Maintenance-free metal-seated globe valves with bellows Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN 15-350 Nodular cast iron PN 25 DN 15-150 Applications