Brass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
|
|
- Rosalind Owen
- 5 years ago
- Views:
Transcription
1 Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 / /8 / /8 / / /3 / /3 / / /6 / / /4 / /4 / /4 3/ /8 / /8 / /8 3/ /8 / 35.9 / / / 3/ / / FEMALE CONNECTOR 35.4 /8 / /3 / /4 / /4 / /8 / /8 3/8 MALE ELBOW /8 / / /3 / /3 / / /4 / /4 / /4 3/ /8 / /8 / /8 3/ /8 / / 3/ / / MALE BRANCH TEE & Thread /3 / /4 / /4 / /8 / /8 / /8 3/8 - Made for compressed air, water and heavy vacuum applications - Used in industrial assemblies, machiner y, laboratories and vending machines - Built to respond to the maximal pressures established by the type of tubing used: polyurethane, polyethylene, nylon, copper or any metal - Completely airtight and leak resistant - Teflon coated male threads - Quick and fast connections and disconnections - Full flow, 60% more flow than conventional fittings Maximum Working Pressure Varies depending on tubing used Working Temperature -3 C to 93 C ( -0 F to 00 F) Construction Body: Brass Gasket: Buna-N /8 / /3 / /6 / /4 / /4 / /4 3/ /8 / /8 / /8 3/ / / / 3/ / / SWIVEL MALE BRANCH TEE & Thread /8 / /3 / /4 / /4 / /8 / /8 3/ / 3/ / / MALE RUN TEE & Thread /4 / /4 / /8 / /8 3/8 AIRMAX 77
2 Brass Push-Type Fittings SWIVEL MALE RUN TEE FEMALE / MALE TEE CONNECTOR «Y» CONNECTOR MALE NPT TO DUAL AQ TUBE CONNECTOR & Thread /8 / / /3 / /4 / /4 / /8 / /8 3/ / / 45 MALE ELBOW / / SWIVEL FEMALE ELBOW /3 / /4 / /4 / /8 /4 FEMALE ELBOW 35.4 /8 / /3 / /4 / /4 / /8 /4 Thread Thread (M) NPT (F) NPT /8 /8 /4 FEMALE BULKHEAD UNION /4 / /4 / /8 /4 QUICK DISCONNECT TUBE TO MALE PIPE* /4 /4 * When disconneted, flow shuts of f automatically FEMALE BRANCH TEE & Thread /4 / /8 /4 SWIVEL BANJO ELBOW /3 0-3 s & Thread /4 /4 REDUCER UNION* /8 / /3 /4 * Note: To be used with the connectors of only. STRAIGHT UNION /8 / /3 5/ /4 / /8 / /8 3/ / / BULKHEAD UNION /3 5/ /4 / /8 3/ / / 78 AIRMAX
3 Brass Push-Type Fittings UNION ELBOW HOSE BARB ADAPTER* TRIPLE TUBE CONNECTOR / / / / / UNION TEE /8 /8 / /3 5/3 5/ /6 3/6 3/ /4 /4 / * 3/8 /4 3/ /8 3/8 3/ / / / * Tee Reducer Plug Barb /4 /8 *Note: For polyurethane or other soft plastics UNION CROSS / / /8,, 3 & 4 & /3 5/ /4 /4 CONNECTOR DUAL TUBE & Plug /3 5/3 Airmax Brass Push-Type Fittings are essential tools to ensure the maximum efficiency of your logical accessories 3 AIRMAX 79
4 DOT Push-Type Fittings DOTCOUPLERS APPROVED FOR TRANSPORTATION VEHICLES. Approved by the Department of Transportation. Saves up to 75% of the assembly time compared to standard compression fittings. Provides up to 60% more air than conventional fittings. The Buna-N gasket ensures an air tight connection. Adapts to a large range of temperatures -3 C to 93 C (-0 F to 00 F). Holds tubing securely into place thanks to a proven retention mechanism. Suitable for the maximal pressures of plastic tubing. Many different models: swivel or stationar y, conventional, in line, elbow or tee. Brass body and Teflon coated male threads. No tools necessary, completely reusable ) ) 3) 4) inserted into the coupler. The tube holds in place due to a proven retention mechanism. The O-Ring firmly hugs the exterior of the tube ensuring an airtight connection Expansion due to pressure in tube further helps the retention mechanism 5) Cavity providing tube support to To Connect prevent leakage (internal tube stop) Cut plastic as squarely as possible. Inser t tube into fitting until friction is felt as tube slides past the O-ring. A slight twisting motion while inser ting the tube is often helpful. After this initial friction is felt, continue to push in the tube until it firmly reaches against the internal tube stop. To Disconnect With thumb and forefinger, hold down the top of insert against the fitting body and then, with the other hand, pull out the tubing. No tools are needed. 80 AIRMAX
5 DOT Push-Type Fittings APPROVED DOT FOR THE AUTOMOTIVE INDUSTRY FOR MOTOR VEHICLES HAVING AIR BRAKE SYSTEMS MALE DOT CONNECTOR SWIVEL DOT MALE ELBOW /3 / /3 / /4 / /4 / /4 3/ /8 / /8 / /8 3/ /8 / / / / 3/ / / /4 / FEMALE DOT CONNECTOR /4 / /4 / /4 3/ /8 / /8 / /8 3/ /8 / / / / 3/ / / /8 3/ /8 / FEMALE DOT ELBOW - Essential for motor vehicles having air brake systems, ideal for all secondar y compressed air systems - Meets following standards: D.O.T. FMVSS and SAJE J3 (Air Brake Performance Requirements) - Engineered to be used with DOT nylon tubing - Essential for the automotive industr y - Available in fixed and swivel formats /4 / /4 / /8 / /8 3/8 MALE DOT ELBOW /4 / /4 / /8 / /8 3/8 45 MALE ELBOW Maximum Working Pressure 50 PSI or vacuum (4 Hg) Working Temperature -40 C to 93 C(-40 F to 00 F) Construction In line pieces: Brass CA360 Tee and Elbow Connectors: Brass CA377 Gasket and O-ring: Buna-N Teflon coating: Loctite /3 / /4 / /4 / /8 / /8 / /8 3/ /8 / / / / 3/ / / /8 3/ /8 / /4 / /4 / /8 / /8 / /8 3/ /8 / / / / 3/ / / /8 / Caution To be applied on brake systems except for systems found between the chassis and the axle or between a tow truck and towed vehicle AIRMAX 8
6 DOT Push-Type Fittings APPROVED FOR THE AUTOMOTIVE INDUSTRY SWIVEL 45 MALE ELBOW MALE BRANCH TEE FEMALE BRANCH TEE /4 / /4 / /8 / /8 / /8 3/ / 3/ / / /8 / MALE RUN TEE & Thread /4 / /4 / /8 / /8 3/8 & Thread /4 / /4 / /8 / /8 3/ / 3/8 SWIVEL MALE BRANCH TEE & Thread /4 / /4 / /8 / /8 3/ / / / 3/ / / & Thread /4 / /4 / /8 /4 FEMALE BULKHEAD UNION /4 / /4 / /8 / /8 3/8 SWIVEL MALE RUN TEE & Thread /4 / /4 / /8 / /8 3/ / 3/ / / 8 AIRMAX
7 DOT Push-Type Fittings APPROVED FOR THE AUTOMOTIVE INDUSTRY DOT UNION CONNECTOR DOT UNION ELBOW DOT NYLON PLUG / / / / /8 DOT BULKHEAD UNION / / / DOT UNION TEE / / / / / / / / / / /8 For the best installations of DOT Push-Type Fittings, the use of Nylon DOT Tubing is strongly recommended AIRMAX 83
Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationatalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationValves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
More informationBRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING
BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationtubing, faucets and fittings
small Bore teflon ptfe tubing Order by the Foot* Superior Chemical Resistance High degree of flexibility allows multiple twists and turns in tight spaces Non-stick surface will not collect particulates
More informationCartridges & Manifolds
Cartridges & Manifolds SAE Encapsulated Cartridge Meets Performance Requirements of D.O.T. FMVSS 571.106 Meets Dimensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor costs
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationFittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
More informationInstruction Manual Includes:
Instruction Manual Includes: Page 1: HydraHorse Installation for Basic 2- Horse System Part I: Tank, pump, and electrical supply Page 6: Page 9: Part II: Page Bowls, Brackets, Pipes and Fittings Installing
More informationMessing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
More information100 SERIES & 120 SERIES HOSE
INTRODUCTION MSA Stealth is the new way in performance plumbing. Its strong, lightweight and full-flow design leaves the competition behind. MSA Stealth has a large range of fittings, filters, tools and
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FOR COLD PLANER sprinkler KIT (LAF5400) INSTRUCTIONS NUMBER: MR05678 Complete operator s and parts manuals are supplied with the Cold Planer. 800-456-7100 www.paladinlcg.com 2800
More informationMINIMATIC FITTINGS. Push-Quick Fittings. Quick Connect Fittings. Clippard Instrument Laboratory, Inc. (513)
MINIMATIC FITTINGS Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com Push-Quick Fittings 325-329 Slip-On Fittings 330-335 Brass Fittings 336-347 Quick Connect Fittings 348-353 Fittings
More informationGaskets. Fluid Handling Components. Bee Valve offers a full line of original and replacement gaskets to meet all your needs.
2009 Fluid Handling Components Gaskets Bee Valve offers a full line of original and replacement gaskets to meet all your needs. Bolted Tank Fitting Bulkhead Fitting Manifold System Cam Coupler Tank Lid
More informationTable of Contents. SeaTechInc.com
Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick
More informationMur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
More informationLF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
More informationINOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
More informationApplicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
More informationHi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
More informationPage. Table of Contents. 2 SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4
Table of Contents Page SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4 G1212 NYLON AIR BRAKE: G1212 Bulk Tubing...4 G212 RUBBER AIR BRAKE HOSE: G212 & G212L Bulk Hose...5 G212 Hose Assemblies...5
More informationINSTALLATION INSTRUCTIONS PARTS LIST INSTALLATION INSTRUCTIONS AIR CONTROL KIT (800A0168 OR 800A0169)
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS PARTS LIST AIR CONTROL KIT (800A0168 OR 800A0169) Link mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 (712) 722-4874 Fax (712) 722-4876
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationTABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 2012 New Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-5 Series 3000 Race Hose Ends Page 6-8 Series 3000 Direct-Fit Hose Ends
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationHIGH PRESSURE SPRAYERS
S S STRAIGHT THROUGH QDS FITTINGS AND SWIVELS NOZZLES SPRAY GUNS AND WANDS 337 NOZZLES QUICK DISCONNECT NOZZLE 0-degree red tip nozzle, 15-degree yellow tip nozzle, 25-degree green tip nozzle, 40-degree
More informationManifolds. 4 Inline 4 Dual Air 4 Junction Blocks 4 Terminal Blocks 4 Aluminum, Brass, Stainless Steel, Nylon & Polypropylene
Providing System Solutions for Fluid Control Control Valves 4 -Way, 3-Way & 4-Way Valves 4 Pressure Regulators, Flow Controls & Needle Valves 4 Variety of sizes & configurations 4 Anodized or Electroless
More informationTABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Series 2000 Pro-Flow Race Hose Ends Page 3-4 Series 3000 Race Hose Ends Page 5-7 Series 3000 Direct-Fit Hose Ends Page 8-9 Premium Black
More informationINSTALLATION INSTRUCTIONS COOLANT TANK KIT
INSTALLATION INSTRUCTIONS COOLANT TANK KIT 2017+ Honda Civic Type-R Document: 19-0197 Support: info@radiumauto.com NOTES: Installation to be performed on engines that are completely cooled down. Do NOT
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationBall & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
More informationC WD 2 WHEEL LOW KIT FOR DODGE RAM 4WD VEHICLES
C18056-4WD 2 WHEEL LOW KIT FOR 1994-2002 DODGE RAM 4WD VEHICLES Pacbrake s 4WD 2 Wheel Low Kit allows the vehicle operator to engage the transfer case into 4WD low range without engaging the front wheel
More informationJones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings
SECTION - FITTINGS & VALVES Brass Compression Fittings... 131-132 Chrome Plated Compression Fittings... 133 45 Flare Tube Fittings... 134-135 Space Heater & Gas Range Fittings... 136 Yellow Brass Pipe
More informationTube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
More informationSKY Refrigeration Brass Fittings. Forged Short Barrel Flare Nuts (Co 2. Forged Long Barrel Flare Nuts (Frost Free & Co 2
Forged Short Barrel Flare Nuts (Co 2 ) 13 SKY Item No. Item Description CO2 Pack qty 201-0404 1/4 SAE Yes 10 201-0504 5/16 SAE X 1/4 Tube Yes 10 201-0505 5/16 SAE Yes 10 201-0606 3/8 SAE Yes 10 201-0808
More informationCartridges & Manifolds
Cartridges & Manifolds SAE Encapsulated Cartridge Meets Performance Requirements of.o.t. FMVSS 571.106 Meets Proposed imensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor
More informationHundreds of types of fittings
Push-to-Connect Hundreds of types of fittings can be used with plastic and rubber tubing and hose. Our goal at NewAge Industries is to offer a good cross-section of fittings to efficiently connect our
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationFITTING SELECTION GUIDE
This white paper will help you to determine which miniature (barbed, push-to-connect, or compression) fitting type is suitable for your specific application. At the beginning of a new project, engineers
More informationTL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
More informationPneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
More informationLow Pressure Series - Accessories. High Pressure Series - Accessories
Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray
More informationInsert Fittings. Series KF. Superior tube mounting. A reliable seal Holds the tube tightly
Insert Fittings Series KF A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials Tube grip (resin sleeve) Tube
More information82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
More informationCombustion Technologies By-Pass Filtration Instructions
Combustion Technologies By-Pass Filtration Instructions www.combustionusa.com Made in the USA Date Revision Jan 17 th, 2013 PLEASE READ AND UNDERSTAND ALL INSTALLATION INSTRUCTIONS PRIOR TO BEGINNING THE
More informationBRUTE II 4-VALVE Manifold
gauges Leak Detectors Detectors 20 BRUTE II 4-VALVE Manifold The Brute II 4-Valve Test Charging Manifold provides the flow that s proven faster than any conventional manifold. The aluminum alloy is forged
More informationTABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Featured Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-8 Series 2000 Expander Hose Ends Page 7 Series 2000 Reducer Hose Ends
More informationLEAK TEST PROCEDURE MRT4-DC LIFTERS SINGLE VACUUM SYSTEMS TESTING AND MAINTENANCE MUST BE DONE BY A QUALIFIED PERSON KEEP FOR FUTURE REFERENCE
LEAK TEST PROCEDURE MRT4-DC LIFTERS SINGLE VACUUM SYSTEMS TESTING AND MAINTENANCE MUST BE DONE BY A QUALIFIED PERSON KEEP FOR FUTURE REFERENCE TST-011 Rev. 2013-049 Page 1 of 12 THIS PAGE INTENTIONALLY
More informationPORTABLE EXTRACTOR 500/500H ( ) 115V 230V
PORTABLE EXTRACTOR 500/500H (78-003 78-004) 115V 230V 500/500H TOP VIEW 03-00030 4 RIVET 3/16 X 1/2 AL/AL BLK AND 03-00204 1 RIVET - 3/16 X 5/8 TRI FOLD AL/AL 03-01547 1 WASHER FLAT.203 ID X.734 OD X.06
More informationMarine Fuel Filtration Marine 800 Series
Racor recyclers offer large diesel engine operators both ease of maintenance and continuous engine operation. Continuous operations include filter changeouts and the draining of accumulated water from
More informationSERVICE MANUAL / PARTS LIST
SERVICE MANUAL / PARTS LIST APPLIANCE CLAMP SOFT TOUCH MODEL #113242 PATENT NO. 9,630,821 CONTENT: PAGE 1 Lift Truck Requirements General Installation Procedures General Inspection & Maintenance 2-3 Clamp
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationGetz Equipment Innovators 450 lb Portable / Wheeled Unit Dry Chemical Fill System Part No: 3G0061/3G0063
Getz Equipment Innovators 450 lb Portable / Wheeled Unit Dry Chemical Fill System Part No: 3G0061/3G0063 1 Revised 4/12/17 2320 Lakecrest Drive, Pekin IL 61554 PH. (888) 747-4389 Fax (309) 495-0625 Website:
More informationITEM QTY CHECK PART NUMBER DESCRIPTION
PART #90542A Boost Gauge Package, SLP, 2005-2013 Corvette PACKING LIST Before installation, use this check list to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER DESCRIPTION
More informationInstrumentation Thread Fittings
www.superlok.com INDEX ICN 4P IRHB 6P IRSE 8P Close Nipple Reducing Hex Bushing Reducing Street Elbow IHC 6P IME 8P Hex Coupling Male Elbow IHN 4P Hex Nipple IHRC 6P IFT 8P Hex Reducing Coupling Female
More informationBRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
More informationXP-300 Series Sprinklers Installation & Service Instructions
XP-300 Series Sprinklers Installation & Service Instructions Introduction The XP-300 Series Sprinkler is a multiple-stream gear-driven sprinkler ideal for residential and commercial applications. Sprinkler
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationSUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
More informationM-8100EP. Installation Guide ENGINEERED PLASTIC MANIFOLD SERIES. Introduction. A. Assemble Manifold Components
Introduction The Pro Manifolds with Integrated adaptor are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options
More informationInnovative Design Maximum Capability
Optimum Performance Innovative Design Maximum Capability www.liquifit.net 7205 East Hampton Avenue Mesa Arizona 85209-3301 Introducing From the Trusted Inventor of the Push-to-Connect Fitting With over
More informationLIQUIfit Push-In Fittings
LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure
More informationSpeed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications
Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube
More informationTable of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
More informationSPEED CONTROLLERS WITH QUICK FITTINGS
SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow
More informationField Service Bulletin CNG and LNG Leak Repair Tutorial
Field Service Bulletin CNG and LNG Leak Repair Tutorial ENP-552 Rev. A: July 26, 2017 1. Introduction Figure 1 Leak detection for CNG (left) is the same as LNG (right). Leak detection and repair is one
More informationLEAK TEST PROCEDURE DC CHANNEL LIFTERS SINGLE VACUUM SYSTEMS TESTING AND MAINTENANCE MUST BE DONE BY A QUALIFIED PERSON KEEP FOR FUTURE REFERENCE
LEAK TEST PROCEDURE DC CHANNEL LIFTERS SINGLE VACUUM SYSTEMS TESTING AND MAINTENANCE MUST BE DONE BY A QUALIFIED PERSON KEEP FOR FUTURE REFERENCE TST-008 Rev. 2013-048 Page 1 of 10 THIS PAGE INTENTIONALLY
More informationMiniature Fittings Stainless Steel 316. Hose nipple. Barb Configuration for easy insertion into the tube Holds the tube tightly.
Miniature Fittings Stainless Steel 316 Series MS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose nipple
More informationStainless Steel 316 One-touch Fittings
CT.ES50- Stainless Steel One-touch Fittings aterial etal parts: Stainless steel Seal parts: Special FK Can be used with steam Operating fluid temperature 5 to 0 C Grease-free tubing material FEP, PF, Nylon,
More informationNeoprene. Steel or Brass
The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose
More informationPriming Systems Installation Instructions
Priming Systems Installation Instructions System Components: Single Priming Pump: Single VAP Valve Systems: Control Panel Activated... 2 Auto Prime (Pressure Switch) Activated... 3 Multiple VAP Valve Systems...
More informationPARTS LIST PONY 20 SCA
PARTS LIST PONY 20 SCA WIRING DIAGRAM PART NO. PART DESCRIPTION 4990601 GEARMOTOR - 120 VOLT 4990581 GEARMOTOR - 240 VOLT 4890391 VAC MOTOR - 115 VOLT 4891251 VAC MOTOR - 240 VOLT 4991321 BRUSH MOTOR -
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
More informationBASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
More informationPhone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVi-05 Stainless Steel In-Line Adjustable Pressure Relief
More informationLF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
More information+91-8048078009 Kanti Enterprises http://www.kantienterprises.in/ We are amongst the leading Manufacturers, Exporters and Suppliers of this impeccable range of Products like Pipes & Tubes, Flanges, Pipe
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More informationSM1700 Pneumatic Center Punch Tool Owner s Manual and Operating Instructions
Owner s Manual and Operating Instructions Table of Contents Page Information 2 Warranty and Safety Guidelines 3 Overview and Installation 4 Air System Requirements 5 Setting Controls 6 Installing Clamps
More informationInstallation Instructions
Replacement Proportioning Valve for BrakeMaster model 9060 Installation Instructions Part number 900001 Time Tested Time Proven ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 800-669-9690 Fax
More informationA Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
More informationPARTS MANUAL 450SERIES AHE-450-DE4 AHE-450-DW3
PARTS MANUAL 450SERIES AHE-450-DE4 AHE-450-DW3 Table of Contents Heater Overview General ----------------------------------------------------------------------------------------------------------------
More informationCompression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationBRASS HOSE BARBS G21B
BRASS HOSE BARBS For clamshell packaged parts add: PAK to the part number. Eg... G20B-025:PAK, etc. Part Pipe Hose PRICE EACH Pkg Number Size I.D. PAK Loose Std Pkg Qty G2B45 45 MALE NPT HOSE BARB Part
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FUEL SURGE TANK INSTALL KIT Honda S2000 Document# 19-0063 Support: info@radiumauto.com WARNING: DO NOT SMOKE WHILE WORKING ON FUEL SYSTEMS. KEEP SPARKS AND OPEN FLAMES AWAY FROM
More informationEclipse ES Air Compressor and Drive Service Parts List (Models ECL-200 and ECL-400)
Eclipse ES Air Compressor and Drive Service Parts List (Models ECL-200 and ECL-400) Document Number Index: Issue Date 02/19/14 See Page Rev. Date 1/24/18 Clutch Compressor Air Circuit Tubing Component
More informationINSTALLATION AND MAINTENANCE OF TOP LOADING ARM
INSTALLATION AND MAINTENANCE OF TOP LOADING ARM D TABLE OF CONTENTS 1. INTRODUCTION 04 2. SPECIFICATION OF THE REDLANDS LOADING ARM 04 3. INSTALLING THE LOADING ARM 3.1. Installation Procedures 05 4.
More informationM:\Logo.jpg SERVICE MANUAL / PARTS LIST APPLIANCE CLAMP SOFT TOUCH
M:\Logo.jpg SERVICE MANUAL / PARTS LIST APPLIANCE CLAMP SOFT TOUCH MODEL #113765 PATENT NO. 9,630,821 CONTENT: PAGE 1 Lift Truck Requirements General Installation Procedures General Inspection & Maintenance
More informationFITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
More information$1.50 $3.00 U.S. &adaptors chart
$.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance
More information