BROEN QUICK CONNECT FOR 5.0 GASES

Transcription

1 BROEN QUICK CONNECT FOR 5.0 GASES LAB FITTINGS

2 Table of contents Table of Contents 2 Advantages 2 Product Range 3 Outlets 4 Technical Specifications 5 Accessories 5 Mounting Information 6-7 Advantages Advantages for end users: Flexible and compact design increases size of working area. Reduced downtime. Innovative and compact design. Combined flow valve and quick connect. Key system protects against undesired mix of media, 11 media keys are available. Clear media indication. Possibility of attaching additional equipment: - flow meters, pressure regulators, etc. Non-return valve in outlets protects against contamination of equipment. Valve is locked with no plug inserted. Integrated parking position. O-ring which seals outlet and quick connect is replaceable without disassembling the quick connect. Advantages for architects & furniture manufacturers: Increased flexibility in laboratory design. Last minute determination of media possible. Number of fittings can be reduced due to the flexibility of the quick connect. Advantages for plumbers: Simple and rational installation. 6 different methods of installation. Last minute change of media possible (Prior to start of use). Possibility to install additional quick connect in the laboratory, using a model for exposed piping. 2

3 Product range Built-in No. 070XXX1 Wall/panel mounting, concealed piping No. 070XXX2 Backside inlet: 1/4 NPT female See dimensions on page 8 Backside inlet: 1/4 NPT female See dimensions on page 8 Wall/panel mounting, exposed piping No. 070XXX3 Bench/suspended mounting No. 070XXX4 Suspended mounting Side inlet: 1/4 NPT female See dimensions on page 8 Inlet: 1/4 NPT female See dimensions on page 8 Media Label: According to standard EN13792:2002 CA V O 2 N 2 CO 2 H 2 Ar He Model Label: American recommendation Air Vac O 2 N 2 CO 2 H 2 Ar He Standard EN13792: American recommendation Standard EN13792: American recommendation Standard EN13792: American recommendation Standard EN13792: American recommendation additional media options available on request. 3

4 Outlets 90 outlet with serrated hose nozzle No. 07XXX00 90 outlet with 1/4 NPT female No. 07XXX10 Straight outlet No. 070XX00 See dimensions on page 9 1/4 NPT female See dimensions on page 9 1/4 NPT male See dimensions on page 9 Flow meter No. 07XXX3Y Pressure regulator No. 07XXX2Z Flow meter Letter Y in part number designates flow range: Y flow range l/min l/min l/min l/min See dimensions on page 9 See dimensions on page 9 Pressure regulator Letter Z in part number designates pressure range: Z press bar/ 0-10 bar range psi psi kpa kpa Pressure regulator with a pressure range of 0-1 bar/ 0-100kPa (0-14.5psi) is available on request Media Label: According to standard EN13792:2002 CA V O 2 N 2 CO 2 H 2 Ar He Model Label: American recommendation Air Vac O 2 N 2 CO 2 H 2 Ar He Standard EN13792: American recommendation Standard EN13792: American recommendation Standard EN13792: Y Y Y Y Y Y Y American recommendation Y Y Y Y Y Y Y Standard EN13792: Z Z Z Z Z Z Z American recommendation Z Z Z Z Z Z Z 3 additional media options available on request. 4

5 Technical specifications Quick connect Outlets Operating pressure: -1 bar to 10 bar psi to 145 psi Materials: Stainless steel and chemical nickel plated brass Purity: 5.0 (Only obtainable if system is purged when reconnected) Gaskets: FKM Test pressure: 1.5 x operating pressure Operating temperature: 0 C to 60 C. 23 F to 140 F Flow regulation curve 300 Non-standard media must be confirmed by BROEN. Inlet: 1/4 NPT female 250 Flow [l/min] Standard media : Inactive gases (Air, Vac, O2, N2, CO2, H2, Ar & He) Materials in media contact: Stainless steel, brass & PVDF Gaskets: FKM External parts: Stainless steel, chemical nickel plated brass & EPDM rubber bar 145 psi Inlet pressure Gas used in test: Compressed Air. Model used in test: Quick Connect with outlet No Accessories Description Characteristics BROEN UniFlex elbow fitting Brass BROEN UniFlex Tee fitting Brass BROEN UniFlex straight fitting Brass Male 1/4 NPT Female BROEN UniFlex Male 1/4 NPT 2 x Female BROEN UniFlex Male 1/4 NPT Female BROEN UniFlex Plastic: Teflon (PTFE)**** OD15mm-UniFlex... Rubber: FKM**** Union nut G1/2-UniFlex Metal: Brass UniFlex -UniFlex Description Swagelok * straight tube fitting (allmedia) media) (all Tube diameter**: Stainless Steel Male 1/4 NPT 3 mm: 4 mm: 6 mm: 8mm:...96I I I I0111 1/4 :...96I0103 1/8 :...96I Swagelok * elbow tube fitting (all media) 93R1020xxxx*** 93R1220xxxx 93R1520xxxx 93R4020xxxx 93R2020xxxx 93S7080xxxx*** 93S8080xxxx For more information about hoses and their technical specifications please require document 99G0005. Tube diameter: Stainless Steel Braiding: Stainless Steel Male 1/4 NPT-OD10mm Metal: Stainless Steel OD10mm-OD10mm... Product No. Characteristics BROEN UniFlex OD10mm-UniFlex... Braiding: Stainless Steel hose OD12mm-UniFlex... BROEN Flexible Stainless Steel pipe Product No. Male 1/4 NPT Swagelok * hose connector Stainless Steel 3 mm: 4 mm: 6 mm: 8 mm:... 96I I I I0043 1/4 :...96I0109 1/8 :...96I0110 Hose ID: 1/4 :... 96I0045 Male 1/4 NPT * Swagelok TM Swagelok Company. ** Other dimensions available on request. *** Standard lengths of hoses (xxxx): 0500 =500mm, 0700 =700mm, 1000 =1000mm, 1200 =1200mm, 1500 =1500mm, 2000 =2000mm, 2500 =2500mm, 3000 =3000mm **** PTFE and rubber are penetrable materials meaning that gases, vapors, and liquids may diffuse through them. Always check compatibility with gases in application! 5

6 Mounting information Built-in: No. 070XXX1 Bench/suspended mounted: No. 070XXX4 49 [1 15/16 in] 30 [1 3/16 in] Ø75 [2 15/16 in] 87 [3 13/32 in] Ø72 [2 27/32 in] Mounting hole Panel Max 30 [1 3/16 in] Ø57 [2 1/4 in] ANSI B /4" NPT Ø25 [1 in] Ø51 [2 in] Ø52 [2 1/16 in] 120 [4 23/32 in] 52 [2 1/32 in] 5 [3/16 in] Ø22 [7/8 in] ANSI B /4" NPT Max. 32 [1 1/4 in] Wall/panel mounted, concealed piping 070XXX2. MOUNTED WITHOUT A WALL BRACKET Mounting holes (frontside view) Table/ceiling M3x0.5 Ø Ø Holes should be bored with a help of a wall bracket Ø MOUNTED WITH A WALL BRACKET Mounting holes (frontside view) Ø Hole should be bored with a help of a wall bracket Ø MOUNTED WITHOUT A WALL BRACKET MOUNTED WITH A WALL BRACKET Inlet ANSI B /4"NPT Inlet ANSI B /4"NPT Ø Ø [1 5/16 in] 12 [15/32 in] Mounting hole Contour Column 18 [23/32 in] 13 [1/2 in] 28 [1 3/32 in] Wall/panel mounted, exposed piping 070XXX3. Mounted from the frontside

7 Mounting information Flow meter: No. 07XXX3Y 90 outlet with serrated hose nozzle: No. 07XXX [5 3/32 in] Ø30 [1 3/16 in] Ø29 [1 5/32 in] 44 [1 3/4 in] Ø22 [7/8 in] 49 [1 29/32 in] 39 [1 17/32 in] Ø10 [13/32 in] 77 [3 1/32 in] Ø25 [1 in] Ø6 [1/4 in] 90 outlet: No. 07XXX10 85 [3 3/8 in] 36 [1 13/32 in] Ø22 [27/32 in] 49 [1 29/32 in] 39 [1 17/32 in] Pressure regulator: No. 07XXX2Z 101 [4 in] ANSI B /4" NPT 26 [1 in] 30 [1 3/16 in] 48 [1 7/8 in] Ø39 [1 17/32 in] Straight outlet: No. 070XX00 Ø42 [1 21/32 in] 40 [1 19/32 in] ANSI B /4" NPT ANSI B /4" NPT 18 [23/32 in] 5 [7/32 in] 7

8 BROEN LAB develops, manufactures and delivers complete range of fittings for professional laboratories. Our know-how and our quality products ensure the precise flow of water, gases and air, from source to user. BROEN LAB solutions are used by professional users in many kinds of laboratories, from the education and health sectors to industry in general. Our products are already an integrated part of many workplaces. From fittings for purified water, nitrogen, vacuum and compressed air, to the control and regulation of pure gases in critical applications such as a gas chromatography and spectrometry. Our extensive knowledge allows us to continually develop and optimize our products so that they meet customer needs and specifications. Safety, functionality and quality are an integral part of product design and flexibility. Our insight and understanding of working environments and safety in laboratories allow us to develop custom solutions for projects around the world. Use us to plan your project so we can advise you on laboratory layout and design. HEAD OFFICE BROEN LAB GROUP Skovvej 30 DK-5610 Assens Tel Fax lab@broen.com INTERNATIONAL OFFICES BROEN Armaturen GmbH Industriestrasse 8 D Gernsheim Germany Tel Fax info@broen.de BROEN VALVES Ltd. 7, Cleton Street Business Park, Cleton Street Tipton West Midlands DY4 7TR U.K. Tel Fax broenvalves@broen.com BROEN LAB GROUP ISO 9001 certification In September 1991 BROEN LAB GROUP was certified according to ISO 9001 as one of the first Danish companies. The certification was carried out by Bureau Veritas, Denmark, for our Danish site at Assens. The quality management system of BROEN LAB GROUP now complies with detailed specifications laid down by the internationally acknowledged EN ISO 9001:2008. This certification will further contribute to BROEN LAB GROUP s reputation for quality and reliability. BROEN Singapore Pte. Ltd. 10 Bukit Batok Cresent #10-02 The Spire S(658079) Singapore Tel: Fax: sales@broen.com.sg 99B