Certificate of Type Approval (RQS)

Size: px

Start display at page:

Download "Certificate of Type Approval (RQS)"

Adam Cain
6 years ago
Views:

2 Date Issued: 18/OCT/2000 Certificate Number: 00-C15300-X Certificate of Type Approval (RQS) This is to certify that Swagelok Company has met the requirements of ABS Product Type Approval for Swagelok Tube Fittings Model Name(s): See Description, Various Tube Fittings for connecting 2 or more tubes together, connecting to a welded system, & connecting tube fittings together Presented to: Swagelok Company Solon Road Solon Ohio United States of America Intended Service: Tubing/Piping systems for Steel Vessels, MODUs, FPSO's and other maritime industries. Description: For specifc details on the sizes refer to Swagelok Catalog MS , print date November Fittings: To connect two or more tubes together use: Union - (fractional or metric tube); Reducing Union - (fractional or metric tubes); Bulkhead Union - (fractional or metric tube); Bulkhead Reducing Union - (fractional tube); Union Elbow - (fractional or metric tube); Union Tee - (fractional or metric tube); Reducing Union Tees - (fractional tube); Union Cross - (fractional or metric tube); AN Union - (fractional tube to AN flared tube); AN Bulkhead Union - (fractional tube to AN flared tube); To connect tubing to a welded system, use: Tube Socket Weld Union - (fractional tube); Tube Socket Weld Elbow - (fractional tube); Male Pipe Weld Connector - (fractional or metric tube to pipe); Male Pipe Weld Elbow - (fractional tube to pipe); To connect tubing to a Swagelok port use: Reducer - (fractional or metric tube); Long Reducer - (fractional); Bulkhead Reducer - (fractional tube); To connect tube fittings together, use: Port Connector - (fractional or metric tube); Reducing Port Connector - (fractional or metric tube) Ratings:

3 For specifc details on the Ratings & Material refer to the latest Swagelok Catalog MS , Dec 02 Service Restrictions: Brass fittings are not to be used in oil systems Comments: As a courtesy, here is the link to the Swagelock catelog that defines the pressure ratings, then search for ms pdf k ABS has no control on the content and any questions are to be defered to ABS for resolution. Notes / Documentation: Term of Validity: This product/model is covered under Product Design Assessment (PDA) Certificate # 00-HS PDA, dated 22/Sep/2000. This PDA Certificate expires September of It will remain valid for the 5 years from date of issue or until the Rules or specifications used in the assessment are revised (whichever occurs first). ABS Rules: 1997 MODU Rules Section 4/2.2, 4/2.59.2, 4/2.67.1, 4/ & 2000 Steel Vessel Rules 4-6-1/7.5.2 National Standards: International Standards: Government Authority: EUMED: Others: Manager, ABS Programs ABS has used due diligence in the preparation of this certificate and it represents the information on the product in the ABS Records as of the date and time the certificate was printed. Type Approval requires Drawing Assessment, Prototype Testing and assessment of the manufacturer's quality assurance and quality control arrangements. Limited circumstances may allow only Prototype Testing to satisfy Type Approval. The approvals of Drawings and Products remain valid as long as the ABS Rule, to which they were assessed, remains valid. ABS cautions manufacturers to review and maintain compliance with all other specifications to which the product may have been assessed. Further, unless it is specifically indicated in the description of the product; Type Approval does not necessarily waive witnessed inspection or survey procedures (where otherwise required) for products to be used in a vessel, MODU or facility intended to be ABS classed or that is presently in class with ABS. Questions regarding the validity of ABS Rules or the need for supplemental testing or inspection of such products should, in all cases, be addressed to ABS. Printed on : :29:10.628

4 Date Issued: 18/OCT/2000 Certificate Number: 00-C15300-X Certificate of Type Approval (RQS) This is to certify that Swagelok Company has met the requirements of ABS Product Type Approval for Swagelok Tube Fittings Model Name(s): See Description, Various Tube Fittings for connecting tubing to a female thread or to a male thread Presented to: Swagelok Company Solon Road Solon Ohio United States of America Intended Service: Tubing/Piping systems for Steel Vessels, MODUs, FPSO's and other maritime industries. Description: For specifc details on the sizes refer to Swagelok Catalog MS , print date November Fittings: To connect tubing to a female thread, use: Male Connector (fractional or metric tube to ISO tapered pipe thread & NPT thread); Bulkhead Male Connector (fractional or metric tube to NPT thread); Male Connector (fractional tube to SAE/MS straight thread); Long Male Connector (fractional tube to SAE/MS straight thread); Male Connector (fractional tube to O-Seal straight thread); Male Connector (fractional tube to O-Seal pipe thread); Male Connector (fractional or metric tube to ISO parallel thread); Male Elbow (fractional or metric tube to NPT thread and ISO tapered thread); 45 degrees Male Elbow - (fractional tube to NPT thread); 45 degrees Positionable Male Elbow (fractional tube to SAE/MS straight thread); Positionable Male Elbow (fractional or metric tube to SAE/MS straight thread and ISOparallel thread); Male Branch Tee (fractional or metric tube to NPT thread); Male Run Tee (fractional or metric tube to NPT thread); Positionable Male Run Tee (fractional tube to SAE/MS straight thread and ISO parallel thread); Positionable Male Branch Tee (fractional or metric tube to SAE/MS straight thread and ISO parallel thread); To connect tubing to a male thread, use: Female Connector (fractional or metric tube to NPT thread and ISO tapered thread and ISO parallel thread); Bulkhead Female Connector (fractional or metric tube to NPT thread); Female Elbow (fractional or metric tube to NPT thread);

5 Female Run Tee (fractional or metric tube to NPT thread); Female Branch Tee (fractional or metric tube to NPT thread) Ratings: For specifc details on the Ratings & Material refer to the latest Swagelok Catalog MS , Dec 02 Service Restrictions: Brass fittings are not to be used in oil systems Comments: As a courtesy, here is the link to the Swagelock catelog that defines the pressure ratings, then search for ms pdf k ABS has no control on the content and any questions are to be defered to ABS for resolution. Notes / Documentation: Term of Validity: This product/model is covered under Product Design Assessment (PDA) Certificate # 00-HS PDA, dated 22/Sep/2000. This PDA Certificate expires September of It will remain valid for the 5 years from date of issue or until the Rules or specifications used in the assessment are revised (whichever occurs first). ABS Rules: 1997 MODU Rules Section 4/2.2, 4/2.59.2, 4/2.67.1, 4/ & 2000 Steel Vessel Rules 4-6-1/7.5.2 National Standards: International Standards: Government Authority: EUMED: Others: Manager, ABS Programs ABS has used due diligence in the preparation of this certificate and it represents the information on the product in the ABS Records as of the date and time the certificate was printed. Type Approval requires Drawing Assessment, Prototype Testing and assessment of the manufacturer's quality assurance and quality control arrangements. Limited circumstances may allow only Prototype Testing to satisfy Type Approval. The approvals of Drawings and Products remain valid as long as the ABS Rule, to which they were assessed, remains valid. ABS cautions manufacturers to review and maintain compliance with all other specifications to which the product may have been assessed. Further, unless it is specifically indicated in the description of the product; Type Approval does not necessarily waive witnessed inspection or survey procedures (where otherwise required) for products to be used in a vessel, MODU or facility intended to be ABS classed or that is presently in class with ABS. Questions regarding the validity of ABS Rules or the need for supplemental testing or inspection of such products should, in all cases, be addressed to ABS. Printed on : :30:56.644

Date Issued: 18/OCT/2000 Certificate Number: 00-C15300-X Certificate of Type Approval (RQS) This is to certify that Swagelok Company has met the requirements of ABS Product Type Approval for Swagelok

6 Date Issued: 18/OCT/2000 Certificate Number: 00-C15300-X Certificate of Type Approval (RQS) This is to certify that Swagelok Company has met the requirements of ABS Product Type Approval for Swagelok Tube Fittings Model Name(s): See Description, Various Tube Fittings to cap or plug a tube, spare parts, & special connections Presented to: Swagelok Company Solon Road Solon Ohio United States of America Intended Service: Tubing/Piping systems for Steel Vessels, MODUs, FPSO's and other maritime industries. Description: For specifc details on the sizes refer to Swagelok Catalog MS , print date November Fittings: To cap a tube or plug a fitting, use: Cap - (fractional or metric tube); Plug - (fractional or metric tube); As spare parts, use: Back and Front Ferrules (fractional or metric tube); Ferrule-Pak - (fractional or metric tube); Insert - (fractional or metric tube); Nut - (fractional or metric tube); Knurled Nut - (fractional tube); Male Nut - (fractional or metric tube); For connections such as chromatographs, heat exchangers, bored-through, thermocouples, or special connections, use: Thermocouple Connector; Heat Exchanger Tee; Chromatograph Fittings; Union (fractional tube); Female Swagelok Union (fractional tube); Union Tee (fractional tube); Reducing Union (fractional tube); Lap Joint Flange Connector - (fractional or metric tube); Vent Protector - (NPT Thread); Integral ANSI Flange - (fractional or metric tube); Sanitary Flange Fitting - (fractional tube); Swagelok Adapters: Male Adapter - (fractional or metric tube to NPT thread and ISO tapered pipe thread); Male Adapter - (fractional or metric tube to ISO parallel thread); Male Adapter - (fractional tube to SAE/MS straight thread); Male Adapter - (fractional tube to O-Seal straight thread); Female Adapter - (fractional or metric tube to NPT thread and ISO tapered pipe thread and ISO parallel thread); Welded Adapter - (fractional tube to male pipe weld); VCO Gland - (fractional tube to O-ring face seal); VCR Gland - (fractional tube to metal gasket face seal); AN Adapter -

7 (fractional tube to male AN flare); AN Adapter - (fractional tube to female AN flare) Ratings: For specifc details on the Ratings & Material refer to the latest Swagelok Catalog MS , Dec 02 Service Restrictions: Brass fittings are not to be used in oil systems Comments: As a courtesy, here is the link to the Swagelock catelog that defines the pressure ratings, then search for ms pdf k ABS has no control on the content and any questions are to be defered to ABS for resolution. Notes / Documentation: Term of Validity: This product/model is covered under Product Design Assessment (PDA) Certificate # 00-HS PDA, dated 22/Sep/2000. This PDA Certificate expires September of It will remain valid for the 5 years from date of issue or until the Rules or specifications used in the assessment are revised (whichever occurs first). ABS Rules: 1997 MODU Rules Section 4/2.2, 4/2.59.2, 4/2.67.1, 4/ & 2000 Steel Vessel Rules 4-6-1/7.5.2 National Standards: International Standards: Government Authority: EUMED: Others: Manager, ABS Programs ABS has used due diligence in the preparation of this certificate and it represents the information on the product in the ABS Records as of the date and time the certificate was printed. Type Approval requires Drawing Assessment, Prototype Testing and assessment of the manufacturer's quality assurance and quality control arrangements. Limited circumstances may allow only Prototype Testing to satisfy Type Approval. The approvals of Drawings and Products remain valid as long as the ABS Rule, to which they were assessed, remains valid. ABS cautions manufacturers to review and maintain compliance with all other specifications to which the product may have been assessed. Further, unless it is specifically indicated in the description of the product; Type Approval does not necessarily waive witnessed inspection or survey procedures (where otherwise required) for products to be used in a vessel, MODU or facility intended to be ABS classed or that is presently in class with ABS. Questions regarding the validity of ABS Rules or the need for supplemental testing or inspection of such products should, in all cases, be addressed to ABS. Printed on : :31:28.831

Gaugeable Tube Fittings and Adapter Fittings

Gaugeable Tube Fittings and Adapter Fittings www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety