Piston rod attachments
|
|
- Randolph Douglas
- 5 years ago
- Views:
Transcription
1 Piston rod attachments Co-ordinated with Festo s cylinder range Versatile combinations Sturdy and functional Stainless steel variants 2012/09 Subject to change Internet: 1
2 Piston rod attachments Peripherals overview Mounting attachments and accessories Brief description 1 Rod eye SGS Rod eye CRSGS 2 Rod clevis SGA 3 Rod clevis SG Rod clevis CRSG 4 Self-aligning rod coupler FK 5 Coupling piece KSG Coupling piece KSZ 6 Hex nut MSK 7 Adapter AD Rod eyes are maintenance-free due to the combination of steel and PTFE-bronze material in the swivel bearing. Corresponds to ISO dimensional series K. Corrosion and acid-resistant design. Corresponds to ISO dimensional series K. Rod clevises are used in combination with the rod eye SGS for spherical connection of cylinders. This rod clevis is fitted to the threaded end of the piston rod and permits a swivelling movement of the cylinder in one plane. Corresponds to ISO 8140 or DIN Corrosion and acid-resistant design. Corresponds to ISO 8140 or DIN Rod couplers link the piston rod end of all cylinder types to the machine parts to be moved. This compensates for radial and angular deviations (misalignment). Coupling pieces link the piston rod end of all cylinder types to the machine parts to be moved. They compensate radial misalignments up to ±1 mm. For cylinders with non-rotating piston rods. With this coupling piece, a cylinder can be connected with positional stability to the component being moved in order to compensate for radial deviation. Based on and/or corresponds to ISO Specially for through, hollow piston rods, e.g. for connecting vacuum generators. 2 Internet: Subject to change 2012/09
3 Piston rod attachments Product range overview Piston rod attachments Piston rod thread Rod eye Rod clevis Male Female SGS- CRSGS- SGA- 1) SG- CRSG- M4 M6 M8 M10 M10x1.25 x1.25 x1.5 M20x1.5 M27x2 M36x2 M42x2 M48x2 Page/Internet ) Only to be attached to the piston rod in conjunction with the rod eye SGS. Piston rod attachments Piston rod thread Self-aligning rod coupler Coupling piece Hex nut Adapter Male Female FK- KSG- KSZ- MSK- AD- M4 M6 M8 M10 M10x1.25 x1.25 x1.5 M20x1.5 M27x2 M36x2 M42x2 M48x2 M4 M5 M6 M8 M10 Page/Internet /09 Subject to change Internet: 3
4 Rod eyes SGS Rod eye SGS 1 rod eye, 1 hex nut to DIN 439 KK AV B1 CE CN D1 EF EN EU H7 ±0.5 M M M M10 M10x x x M20x M27x M36x M42x M48x KK Z ß1 ß2 ISO CRC 1) Weight Part No. Type dimensional [ ] series K [g] M SGS-M4 M SGS-M6 M SGS-M8 M SGS-M M10x SGS-M10x1, SGS x SGS-x1, SGS x SGS-x1,5 M20x SGS-M20x1,5 M27x , SGS-M27x2 M36x , SGS-M36x2 M42x , SGS-M42x2 M48x , SGS-M48x2 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents 4 Internet: Subject to change 2012/09
5 Rod eyes CRSGS, stainless steel Rod eye CRSGS 1 rod eye, 1 hex nut to DIN 439 High-alloy steel KK AV B1 CE CN D1 EF EN EU 2 H7 ±0.5 M M M10x x x M20x M27x KK Z ß1 ß2 ISO CRC 1) Weight Part No. Type dimensional [ ] series K [g] M CRSGS-M6 M CRSGS-M8 M10x CRSGS-M10x1,25 x CRSGS-x1,25 x CRSGS-x1,5 M20x CRSGS-M20x1,5 M27x , CRSGS-M27x2 1) Corrosion resistance class 4 according to Festo standard Components requiring higher corrosion resistance. Parts used with aggressive media, e.g. food or chemical industry. These applications should be supported with special tests with the media if required 2012/09 Subject to change Internet: 5
6 Rod clevises SGA Rod clevis SGA 1 rod clevis, 1 pivot pin and 1 retaining clip Free of copper and PTFE The rod clevis SGA 1 is used in combination with the rod eye SGS 2 ( 4) for spherical mounting of cylinders. KK B1 B2 B3 CE CK CM CV D1 d12 F7/h9 B12 M10x x x M20x M27x M36x KK L2 L3 L4 LE T1 CRC 1) Weight Part No. Type [g] M10x SGA-M10x1, SGA x SGA-x1, SGA x SGA-x1,5 M20x , SGA-M20x1,5 M27x , SGA-M27x2 M36x , SGA-M36x2 1) Corrosion resistance class 1 according to Festo standard Components with light corrosion exposure. Protection for transport and storage. Components without significant decorative function or surface, e.g. installed out of sight internally or behind covers. 6 Internet: Subject to change 2012/09
7 Rod clevises SG Rod clevis SG 1 rod clevis, 1 hinged spring pin, DIN 71752, ISO hex nut (M4: DIN 934, M6 M48: DIN 439) Free of copper and PTFE KK B1 B2 B3 CE CK CM CV D1 M ±0.3 4h11 4B M ±0.3 6h11 6B M ±0.4 8h11 8B M10 M10x ±0.4 10h11 10B x ±0.4 12h / x ±0.4 16h / M20x ±0.4 20e / M27x ±0.4 30e / M36x ±0.4 35e / M42x ±0.4 40e / M48x ±0.4 50e / KK LE ß1 ISO 8140 DIN CRC 1) Weight Part No. Type ±0.5 [g] M SG-M4 M SG-M6 M SG-M8 M SG-M10 20 M10x SG-M10x1, SG- 24 x SG-x1, SG x SG-x1,5 M20x SG-M20x1,5 M27x , SG-M27x2-B M36x , SG-M36x2 M42x , SG-M42x2 M48x , SG-M48x2 1) Corrosion resistance class 1 according to Festo standard Components with light corrosion exposure. Protection for transport and storage. Components without significant decorative function or surface, e.g. installed out of sight internally or behind covers. 2012/09 Subject to change Internet: 7
8 Rod clevises CRSG, stainless steel Rod clevis CRSG 1 rod clevis, 1 pivot pin, 1 hex nut to DIN 439 High-alloy steel Free of copper and PTFE KK B1 B2 B3 CE CK CM CV D1 h11 H9/e8 ±0.3 M ± B M ± B M10x ± B x ± / x ± / M20x ± / M27x ± / KK LE ß1 ISO 8140 DIN CRC 1) Weight Part No. Type ±0.5 [g] M CRSG-M6 M CRSG-M8 M10x CRSG-M10x1,25 x CRSG-x1,25 x CRSG-x1,5 M20x CRSG-M20x1,5 M27x , CRSG-M27x2 1) Corrosion resistance class 4 according to Festo standard Components requiring higher corrosion resistance. Parts used with aggressive media, e.g. food or chemical industry. These applications should be supported with special tests with the media if required 8 Internet: Subject to change 2012/09
9 Self-aligning rod couplers FK Self-aligning rod coupler FK 1 self-aligning rod coupler, 1 hex nut to DIN 439 Free of copper and PTFE Angular compensation Radial compensation of central axis KK B1 D1 D2 D3 L1 L2 L3 L4 L5 L6 M M M M M M10x x x M20x M27x M36x KK ß1 ß2 ß3 ß4 Radial deviation CRC 1) Weight Part No. Type M ± FK-M4 M ± FK-M5 M ± FK-M6 M ± FK-M8 M10 ± FK-M M10x1.25 ± FK-M10x1,25 ± FK x1.25 ± FK-x1,25 ± FK x1.5 ± FK-x1,5 M20x ± FK-M20x1,5 M27x ±1 2 2, FK-M27x2 M36x ±1 2 5, FK-M36x2 [mm] [g] 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents 2012/09 Subject to change Internet: 9
10 Coupling pieces KSG Coupling piece KSG These coupling pieces connect the piston rod thread of all types of cylinders to machine components which need to be driven. The pieces can compensate for radial alignment deviations of up to 1 mm. 1 flange plate, 1 threaded coupling Free of copper and PTFE KK B1 B2 B3 B4 B5 Max. radial backlash D1 D2 D3 D4 H H13 H13 M10x x x M20x M27x H1 KK H2 T1 Min. axial backlash T2 ß1 Max. tigthening torque 1) CRC 2) Weight Part No. Type M10x KSG-M10x1,25 x KSG-x1,25 x KSG-x1,5 M20x , KSG-M20x1,5 M27x , KSG-M27x2 [Nm] [g] 1) For mounting screws with standard threads and strength class 8.8 2) Corrosion resistance class 1 according to Festo standard Components with light corrosion exposure. Protection for transport and storage. Components without significant decorative function or surface, e.g. installed out of sight internally or behind covers. 10 Internet: Subject to change 2012/09
11 Coupling pieces KSZ Coupling piece KSZ for non-rotating piston rods with male threads These coupling pieces can be used to connect a cylinder with a non-rotating piston rod to another component with a defined orientation without rotating either the cylinder or other component. 1 flange plate, 1 threaded coupling Free of copper and PTFE KK B1 B2 B3 B4 D1 D2 D3 H13 D4 H1 H2 T1 T2 M M M10x x x M20x min. KK ß Max. tightening torque 1) Max. tightening torque 2) Max. tightening CRC 4) Weight Part No. Type torque 3) [Nm] [Nm] [Nm] [g] M KSZ-M6 M KSZ-M8 M10x KSZ-M10x1,25 x KSZ-x1,25 x KSZ-x1,5 M20x KSZ-M20x1,5 1) For mounting screws with standard threads and strength class 8.8 2) For use with lock nut on piston rod 3) Torque which coupling can transmit with coefficient of fricton µ 0,1 and 10x safety margin at max. permissible tightening torque 4) Corrosion resistance class 1 according to Festo standard Components with light corrosion exposure. Protection for transport and storage. Components without significant decorative function or surface, e.g. installed out of sight internally or behind covers. -H- Note The torque on the coupling piece must not exceed the permissible torque on the cylinder. The mounting screws should be tightened evenly. 2012/09 Subject to change Internet: 11
12 Hex nuts MSK Hex nut MSK D1 B1 ß1 Conforms to ISO 8675 Based on ISO 8675 CRC 1) Weight Part No. Type PU 2) [g] M10x MSK-M10x1,25 10 x MSK-x1,25 10 x MSK-x1,5 10 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents 2) Packaging unit quantity 12 Internet: Subject to change 2012/09
13 Adapter AD Adapter AD Anodised aluminium 1 E.g. hollow piston rod 2 Vacuum generator K1 D3 D4 L11 ß1 Weight Part No. Type M6 M AD-M6-M5 M6 Gx AD-M6-x M6 G¼ AD-M6-¼ M8 Gx AD-M8-x M8 G¼ AD-M8-¼ M10x1.25 Gx AD-M10x1,25-x M10x1.25 G¼ AD-M10x1,25-¼ x1.25 G¼ AD-x1,25-¼ x1.25 Gy AD-x1,25-y [g] 2012/09 Subject to change Internet: 13
Piston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationPiston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationPiston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationCartridge cylinders EGZ
Peripherals overview and type codes 7 Installation without mounting attachments Minimal installation space required 4 3 2 1 Mounting attachments and accessories Description 1 Swivel mounting WBN 2 Flange
More informationLinear actuators DLP, Copac
Key features and type codes General -N- Diameter 80... 320 mm -T- Stroke length 40... 600 mm, additional stroke lengths upon request -O- Force 2800... 48000 N Festo Copac linear valve actuators are ideally
More informationMulti-position cylinders/adapter kits
Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended
More informationCompact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation
More informationLinear actuators DFPI
Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator
More informationShort-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationSemi-rotary drives DRQ
Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree
More informationRound cylinders DSNU/ESNU
Round cylinders DSNU/ESNU Reacts quickly thanks to minimal break-away force Meets the highest requirements for running characteristics, service life and load carrying ability Extensive range of accessories
More informationStandard cylinders DNC-C180, to ISO 15552
Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and
More informationStandard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
More informationFlat cylinders EZH/DZF/DZH
Flat cylinders EZH/DZF/DZH Extremely flat design Protected against torsion thanks to special piston shape Compact assembly with block mounting Wide variety of mounting options 2017/10 Subject to change
More informationCompact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap
More informationStandard cylinders DNCB, ISO 15552
Standard cylinders DNCB, ISO 15552 Features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290)
More informationTandem/high-force cylinders
Tandem/high-force cylinders Tandem/high-force cylinders Product range overview Function Version Type Piston Stroke Position sensing Piston rod With male thread A Doubleacting Tandem cylinders DNCT 32,
More informationStandard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
More informationCompact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
More informationRound cylinders DSNU/DSNUP/DSN/ESNU/ESN
Round cylinders DSNU/DSNUP/DSN/ESNU/ESN Round cylinders DSNU/DSNUP/DSN/ESNU/ESN Key features At a glance DSNU-8 63 DSNU-8 25 Stainless steel piston rod Good running performance and long service Piston
More informationRotary/lifting modules EHMB, electric
Features At a glance The rotary/lifting module EHMB combines rotary and linear motion in one compact unit. The rotation is always transferred through a toothed belt to a hollow shaft by an electric motor
More informationRotary/lifting modules EHMB, electric
Features At a glance The rotary/lifting module EHMB combines rotary and linear motion in one compact unit. The rotation is always transferred through a toothed belt to a hollow shaft by an electric motor
More informationCompact cylinders CDC, ISO 21287, Clean Design
Key features Design Easy to clean Easy to assemble Versatile With the CDC (Clean Design Compact) cylinder series, the ADN modular system has been expanded to include an easy to clean compact cylinder variant
More informationLinear drive units DGO
Features General information Double-acting Magnetically coupled without mechanical connections Piston chamber and slide are pressure tight Pressure tight and leak-free system Dirt and dust cannot enter
More informationPre-assembled plug connectors Product range overview
Pre-assembled plug s Product range overview Function Electrical connection Type Cable Version Page/Internet Round plug M8, 3-pin SEA-3GS-M8-S Pg7 Straight/ SEA-GS-M8 Pg7 Straight/ solder lug M12, -pin
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGW Key features. 2 Internet:
Key features At a glance Double-acting piston drive Self-centring Variable gripping action: External/internal gripping Versatility thanks to externally adaptable gripper fingers Wide range of options for
More information-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
More informationStandard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance Design Easy to clean Easy to mount Flexible DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1
More informationClamping-unit cylinders, standard port pattern
Key features At a glance Clamping units are generally used for the friction locking of longitudinally variable rods at any position. The attachment of a clamping unit to a pneumatic cylinder allows the
More informationSwivel modules DSM/DSM-B
Swivel modules DSM/DSM-B Swivel modules DSM/DSM-B Key features At a glance Double-acting swivel module with rotary vanes The swivel angle is infinitely adjustable over the entire swivel range High precision
More informationFeed separators HPVS
Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top
More informationStandard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
More information-H- Note. Silencers Product range overview. Version Type Connection D1 Push-in connector. For tubing I.D. Push-in sleeve diameter.
Silencers Silencers Product range overview Version Type Connection Push-in connector Sintered metal For tubing I.D. Push-in sleeve diameter Noise level M thread G thread NPT thread [db (A)] U-PK-3 3 70
More informationProportional pressure regulators MPPES
Product range overview Function Type Circuit symbol Design Pneumatic connection 1 Proportional pressure regulators With proportional solenoid MPPES Directly actuated valve Nominal size pressurise/ exhaust
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationStandard cylinders DNCI, with measured-value transducer DADE
Features Components for positioning and measuring using the standard cylinder DNCI Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX
More informationThreaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
More information-H- Note. Angle grippers HGWC Key features. 2 Internet:
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationBall valves and shut off valves
Shut off valves HE Hand slide valves W Ball valves QH, manually actuated Ball valves VAPB, mechanically actuated Ball valves VAPB CR, mechanically actuated, corrosion resistant 2003/10 Subject to change
More informationSemi-rotary drives DSR/DSRL
Wide variety of mounting options Infinitely adjustable swivel angle Comprehensive range of accessories 2017/10 Subject to change Internet: www.festo.com/catalog/... 1 Features Brief description In these
More informationParallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
More informationStainless steel cylinders
Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/12 Subject to change Internet: www.festo.com/catalogue/...
More informationHygienic butterfly valves VZFB
Product range overview Version Type Based on standard Nominal width DN Process valve nominal pressure PN With clamp CC VZFB-A ASME BPE 1 10 4 1½ 2 2½ 3 4 Page With welded end WW VZFB-D DIN 11851 DN25 10
More informationSilencers. Festo core product range Covers 80% of your automation tasks
Silencers q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
More informationStandard cylinders DNC-C180, to ISO 15552
-U- Type discontinued Available up until 2016 Standard cylinders DNC-C180, to ISO 15552 Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552
More informationStandards-based cylinders DSBG to ISO 15552
Standards-based cylinders DSBG to ISO 15552 Standards-based cylinders DSBG to ISO 15552 Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431,
More informationQuarter turn actuators DFPB
Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn
More informationCheck valves H/HA/HB/HGL
Check valves H/HA/HB/HGL q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationStandard cylinders DSBC, to ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290) Double-acting For contactless
More informationStandard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NF E 49 003.1 and UNI 10290) The standard cylinder is used
More information-V- New. Linear drives DGC Features. 2 Internet:
Linear drives DGC Features At a glance Without external guide, for simple drive functions Compact fitting length relative to stroke Fully interchangeable with the linear drive DGP Easy assembly and installation
More informationStandard cylinders DDPC, with measured-value transducer DADE
Features Components for positioning and measuring using the standard cylinder DDPC Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX
More informationCylinders DSBG to ISO 15552
Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless
More informationRound cylinders DSNU/ESNU
Round cylinders DSNU/ESNU q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationLinear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
More informationShort-stroke cylinders ADNE-LAS, with linear motor
Key features At a glance Properties Electric short-stroke cylinder with integrated linear motor, specifically designed for dynamic movements between two end positions A cycle of advancing and retracing
More informationStandard cylinders DSBG, to ISO 15552
Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless
More informationVacuum generators Key features
Vacuum generators Vacuum generators Key features Product overview Vacuum generator All Festo vacuum generators have a single-stage design and operate according to the venturi principle. The product families
More informationStainless steel cylinders
Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/10 Subject to change Internet: www.festo.com/catalog/...
More informationQuarter turn actuators DFPB
Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn
More informationSolenoid valves MHJ, fast-switching valves
Solenoid valves MHJ, fast-switching valves Solenoid valves MHJ, fast-switching valves Key features Innovative Versatile Reliable Easy to install Individual electrical connection via connecting cable and
More informationSlide units SPZ, twin piston
Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits www.festo.com
More informationThreaded fittings. Festo core product range Covers 80% of your automation tasks
Threaded fittings q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationSolenoid valves VZWP, servo-controlled
Key features and overview Function The solenoid valve VZWP-L- is a servo-controlled 2/2-way valve with solenoid coil. The solenoid valve is closed when de-energised. When energised, the differential pressure
More informationPositioners CMSX. Festo core product range Covers 80% of your automation tasks
Positioners CMSX q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationMultiple distributors QS
Multiple distributors QS Easy to insert Easy to release Up to 6 outlets 360 rotatable 2018/07 Subject to change Internet: www.festo.com/catalogue/... 1 Multiple distributors QS Key features Simply "plug
More informationLinear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
More information-U- Type discontinued
Key features At a glance -V- New Sturdier Optimised end stop system Optimised intermediate position module Minimised susceptibility to wear One-way flow control valves that can be externally adjusted Integrated
More informationRadial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
More informationMini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
More information-Q- Temperature range C. -L- Operating pressure bar CRVZS-5/10/20 with condensate drain. Air reservoirs CRVZS Technical data
Air reservoirs Air reservoirs CRVZS Function CRVZS-0.1/0.4/0.75/2 -Q- Temperature range 10 +100 C -L- Operating pressure 0.95 16 bar CRVZS-5/10/20 with condensate drain The reservoirs can be used to compensate
More informationPush-in fittings NPQM
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
More informationLinear drives DGC. Festo core product range Covers 80% of your automation tasks
Linear drives DGC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationSelf-closing/rotary push-in fittings QS
Self-closing/rotary push-in fittings QS Self-closing/rotary push-in fittings QS Key features Application Simply plug and work Reliably connected Captive seal Effortless selection of the right fitting.
More informationReverse jet pulse valves VZWE, solenoid actuated
Key features and product range overview Function Reverse jet pulse valves VZWE are piloted 2/2-way valves. They generate pulses of compressed air using a suitable solenoid coil for mechanically cleaning
More informationMini slides SLTE, electric
Key features Range of applications Special features The electric mini slide SLTE is ideal for use in automation applications where controlled end-position cushioning (gentle stopping), constant travel
More informationSuction cups VAS/VASB
s VAS/VASB q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
More informationClamping cartridges/units
Clamping cartridges/units Holding, clamping and braking of round material Wide choice of variants Any assembly position 2017/11 Subject to change Internet: www.festo.com/catalogue/... 1 Clamping cartridges/units
More informationHinge cylinders DFAW
Key features At a glance Hinge cylinder for clamping components during the welding process Sintered bronze bushes as lowfriction bearing material on rod clevis and swivel bearing Clamping unit: With piston
More informationHinge cylinders DW Key features
Key features At a glance Hinge cylinder for clamping components during the welding process Easy assembly thanks to swivel bearing on the bearing cap Integrated flow control Integrated end-position cushioning
More informationSolenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationMultiple distributors QS, Quick Star
Multiple distributors QS, Quick Star Easy to insert Easy to release Up to 6 outlets 360 rotatable 2016/01 Subject to change Internet: www.festo.com/catalogue/... 1 Multiple distributors QS, Quick Star
More informationStandards-based cylinders DSBC, to ISO 15552
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationThree-point grippers DHDS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws High gripping forces with compact dimensions Gripper jaw centring options
More informationPush-in fittings NPQP
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
More informationLong stroke grippers HGPL
Sturdy Gripping forces of up to 754 N Reliable Space saving 2004/10 Subject to change Products 2004/2005 1 / 3 Key features At a glance Space saving and suitable for high forces Two parallel and opposing
More informationLinear drives DGC-K. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationPneumatic components for high-pressure applications
Pneumatic components for high-pressure applications Pneumatic components for high-pressure applications, series L Product range overview Function Version Type Size Pneumatic connection 1, 2 Page Direct
More informationSemi-rotary drives DRVS
Key features Key features at a glance Double-acting semi-rotary drive with rotary vanes Lighter than other semi-rotary drives Modern and compact design Fixed swivel angle Swivel angle can be adjusted with
More informationOne-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
More informationPush-in fittings and connectors QS
Push-in fittings and connectors QS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and
More informationCylinders with displacement encoder
Cylinders with displacement encoder Cylinders with displacement encoder Product range overview Function Type Brief description Drives Rodless DGCI DGPI/DGPIL With guide With contactless displacement measuring
More informationPush-in fittings and connectors QS
Push-in fittings and connectors QS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and
More informationRotary indexing tables DHTG
Key features At a glance Sturdy mechanical system Easy planning and commissioning Indexing: 2, 3, 4, 6, 8, 12, 24 Integrated functions: Overload protection Sensor function Cushioning adjustment Speed setting
More informationCompact Cylinders ADN Inch Series, Based on ISO Overview
Compact Cylinders ADN Inch Series, Based on ISO 2287 Overview Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation space
More information-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
More informationRadial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
More informationVacuum generators 1.1. High vacuum levels of up to 93% Easy connection of holders and suction cups. Lightweight and compact design.
High vacuum levels of up to 93% Easy connection of holders and suction cups Lightweight and compact design No wearing parts Long service life Vacuum monitoring with vacuum switch 2005/07 Subject to change
More informationPush-in fittings and connectors QS, Quick Star
Push-in fittings and connectors QS, Quick Star Push-in fittings QS, Quick Star Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient
More informationPush-in fittings and connectors QS, Quick Star
Push-in fittings and connectors QS, Quick Star Push-in fittings QS, Quick Star Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient
More information