Multiple distributors QS

Transcription

1 Multiple distributors QS Easy to insert Easy to release Up to 6 outlets 360 rotatable 2018/07 Subject to change Internet: 1

2 Multiple distributors QS Key features Simply "plug and work" Reliably connected Captive seal Orientable The stainless steel retaining claw within the fitting holds the tubing securely without damaging its surface. Vibration and pressure surges are safely absorbed. The tubing can be detached easily by pressing down the blue release ring. For your convenience, the appropriate outside tubing diameter is marked on the release ring. A nitrile rubber sealing ring guarantees a perfect seal between standard OD tubing and the body of the fitting. Standard tubing is suitable for use with compressed air and vacuum. All brass parts of Festo s push-in fittings are nickel plated and are thus highly resistant to corrosion. The tapered ISO s have a selfsealing PTFE coating, which allows the fitting to be re-used up to five times without the need for additional sealing components. The fitting can be aligned after assembly. Which fitting fits which thread? to ISO Shorter thread Constant installation depth Replaceable sealing ring Sealing at front Can be re-used a number of times thanks to replaceable sealing ring to EN and ISO 7/1 Self-sealing thread Sealing on the threads No additional sealing surface required Smaller installation dimensions since there is no need for a rebate for the sealing surface Can be re-used up to five times G male thread R male thread G female thread G female thread R female thread 2 Internet: Subject to change 2018/07

3 Multiple distributors QS General technical data Size Design structure Assembly position Type of seal on threaded plug Standard Push/pull principle Any Sealing ring () Coating () Operating and environmental conditions Operating pressure [bar] complete temperature range Temperature-dependent [bar] diagram operating pressure Operating medium Compressed air in accordance with ISO :2010 [7: : ] Water as per manufacturer's declaration 2) Note on operating/pilot medium Operation with lubricated medium possible Ambient temperature [ C] Corrosion resistance class CRC 1) 1 Maritime classification See certificate 2) 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). 2) Additional information Certificates. Operating pressure p as a function of temperature t p [bar] t [ C] Materials Sectional view Multiple distributor 1 Release ring POM (colour: blue) 2 Seal NBR 3 Housing PBT 4 Tube clamping segment High alloy stainless steel 5 Threaded coupling Nickel plated brass Note on materials RoHS-compliant /07 Subject to change Internet: 3

4 Multiple distributors QS Tightening torque Connecting thread Gx 7 ±20% G¼ 9 ±20% Gy 15.5 ±20% G½ 26 ±20% Nominal tightening torque [Nm] Tubing insertion depth Tubing O.D. [mm] Tubing insertion depth [mm] Possible push-in fitting/tubing combinations Thread Tubing O.D. [mm] Rx R¼ Ry R½ ++ Gx G¼ Gy G½ ++ + Possible thread/tubing O.D. combinations ++ Optimum thread/tubing O.D. combinations (with regard to flow) 4 Internet: Subject to change 2018/07

5 Multiple distributors QS Product range overview Shape Design Type Connection D1 Connection D2 Connection D3 Page/ Internet Tubing O.D. Tubing O.D. Tubing O.D. Straight design Multiple distributor, 4 outlets QSQ Rx Gx 4, 6 6 R¼ G¼ 4, 6 QSQ L-shape Multiple distributor, 2 outlets QSLV2 Rx Gx 4, 6, 8 7 R¼ G¼ 6, 8, 10 Ry Gy 8, 10, 12 R½ G½ 12 Multiple distributor, 3 outlets QSLV3 Rx Gx 4, 6, 8 8 R¼ G¼ 6, 8, 10 Ry Gy 8, 10, 12 R½ G½ 12 Multiple distributor, 4 outlets QSLV4 Rx Gx 4, 6, 8 9 R¼ G¼ 6, 8, 10 Ry Gy 8, 10, 12 R½ G½ 12 Multiple distributor, 6 outlets QSLV6 Rx Gx 4, 6, 8 10 R¼ G¼ 6, 8, 10 Ry Gy 8, 10, 12 R½ G½ 12 Multiple distributor, 4 outlets QST3 Rx Gx R¼ G¼ 8 6 Ry Gy 10 8 QST Multiple distributor, 3 outlets Male and female thread with external hex QSYTF Rx Gx 6 12 R¼ G¼ 8 Ry Gy 10 R½ G½ /07 Subject to change Internet: 5

6 Multiple distributors QSQ Multiple distributor QSQ No. of outlets: 4 1 Sealing ring Reducing Connection Nominal Tubing O.D. B1 D6 D7 L1 L2 L4 L6 ß Weight/ piece D1 [mm] D2 [g] Part No. Type PU* Rx QSQ-x QSQ-x-6 1 R¼ QSQ-¼ QSQ-¼-6 1 with sealing ring Gx QSQ-Gx QSQ-Gx-6 1 G¼ QSQ-G¼ QSQ-G¼-6 1 Reducing QSQ QSQ * Packaging unit quantity 6 Internet: Subject to change 2018/07

7 Multiple distributors QSLV2 Multiple distributor QSLV2 No. of outlets: 2 Connection Nominal Tubing O.D. H1 H2 H3 H4 H5 L1 ß1 Weight/ piece D1 [mm] D2 [g] Part No. Type PU* Rx QSLV2-x QSLV2-x QSLV2-x-8 1 R¼ QSLV2-¼ QSLV2-¼ QSLV2-¼-10 1 Ry QSLV2-y QSLV2-y QSLV2-y-12 1 R½ QSLV2-½-12 1 with sealing ring Gx QSLV2-Gx QSLV2-Gx QSLV2-Gx-8 1 G¼ QSLV2-G¼ QSLV2-G¼ QSLV2-G¼-10 1 Gy QSLV2-Gy QSLV2-Gy QSLV2-Gy-12 1 G½ QSLV2-G½-12 1 * Packaging unit quantity 2018/07 Subject to change Internet: 7

8 Multiple distributors QSLV3 Multiple distributor QSLV3 No. of outlets: 3 Connection Nominal Tubing O.D. H1 H2 H3 H4 H5 L1 ß1 Weight/ piece D1 [mm] D2 [g] Part No. Type PU* Rx QSLV3-x QSLV3-x QSLV3-x-8 1 R¼ QSLV3-¼ QSLV3-¼ QSLV3-¼-10 1 Ry QSLV3-y QSLV3-y QSLV3-y-12 1 R½ QSLV3-½-12 1 with sealing ring Gx QSLV3-Gx QSLV3-Gx QSLV3-Gx-8 1 G¼ QSLV3-G¼ QSLV3-G¼ QSLV3-G¼-10 1 Gy QSLV3-Gy QSLV3-Gy QSLV3-Gy-12 1 G½ QSLV3-G½-12 1 * Packaging unit quantity 8 Internet: Subject to change 2018/07

9 Multiple distributors QSLV4 Multiple distributor QSLV4 No. of outlets: 4 Connection Nominal Tubing O.D. H1 H2 H3 H4 H5 L1 B1 ß1 Weight/ piece D1 [mm] D2 [g] Part No. Type PU* Rx QSLV4-x QSLV4-x QSLV4-x-8 1 R¼ QSLV4-¼ QSLV4-¼ QSLV4-¼-10 1 Ry QSLV4-y QSLV4-y QSLV4-y-12 1 R½ QSLV4-½-12 1 with sealing ring Gx QSLV4-Gx QSLV4-Gx QSLV4-Gx-8 1 G¼ QSLV4-G¼ QSLV4-G¼ QSLV4-G¼-10 1 Gy QSLV4-Gy QSLV4-Gy QSLV4-Gy-12 1 G½ QSLV4-G½-12 1 * Packaging unit quantity 2018/07 Subject to change Internet: 9

10 Multiple distributors QSLV6 Multiple distributor QSLV6 No. of outlets: 6 Connection Nominal Tubing O.D. H1 H2 H3 H4 H5 L1 B1 ß1 Weight/ piece D1 [mm] D2 [g] Part No. Type PU* Rx QSLV6-x QSLV6-x QSLV6-x-8 1 R¼ QSLV6-¼ QSLV6-¼ QSLV6-¼-10 1 Ry QSLV6-y QSLV6-y QSLV6-y-12 1 R½ QSLV6-½-12 1 with sealing ring Gx QSLV6-Gx QSLV6-Gx QSLV6-Gx-8 1 G¼ QSLV6-G¼ QSLV6-G¼ QSLV6-G¼-10 1 Gy QSLV6-Gy QSLV6-Gy QSLV6-Gy-12 1 G½ QSLV6-G½-12 1 * Packaging unit quantity 10 Internet: Subject to change 2018/07

11 Multiple distributors QST3 Multiple distributor QST3 No. of outlets: 4 Reducing Connection Nominal Tubing O.D. D6 D7 H1 H2 L1 L2 L3 L4 L5 L6 ß Weight Part No. Type PU* D1 [mm] D2 D3 [g] Rx QST3-x R¼ QST3-¼ Ry QST3-y with sealing ring Gx QST3-Gx G¼ QST3-G¼ Gy QST3-Gy Reducing QST QST QST * Packaging unit quantity 2018/07 Subject to change Internet: 11

12 Multiple distributors QSYTF Multiple distributor QSYTF No. of outlets: 3 Connection Nominal Tubing O.D. B1 D3 D6 H1 H2 H3 H4 L1 L2 ß Weight/ piece D1 [mm] D2 [g] Part No. Type PU 1) R male thread and female Rx Gx QSYTF-x-6-B 1 R¼ G¼ QSYTF-¼-8-B 1 Ry Gy QSYTF-y-10-B 1 R½ G½ QSYTF-½-12-B 1 G male thread with sealing ring Gx Gx QSYTF-Gx-6 1 G¼ G¼ QSYTF-G¼-8 1 Gy Gy QSYTF-Gy-10 1 G½ G½ QSYTF-G½ ) Packaging unit quantity 12 Internet: Subject to change 2018/07