One-way flow control valves GR/GRA, in-line installation
|
|
|
- Douglas Strickland
- 6 years ago
- Views:
Transcription
1
2 Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA Inline M3, M5, GÁ, G¼, Gy, G½, G¾ Pneumatic connection 2 M3, M5, GÁ, G¼, Gy, G½, G¾ qnn 1) [l/min] Adjustment component ,300 Knurled screw 3 Page/ Internet Polymer One-way flow control function GR Inline QS-3, QS-4, QS-6, QS-8 QS-3, QS-4, QS-6, QS Knurled screw 8 1) Standard nominal flow rate in direction of flow control. Type codes GR QS-4 Type GR GRA One-way flow control valve, in-line installation One-way flow control valve, in-line installation Pneumatic connection 1 and 2 M3 Female thread M3 M5 Female thread M5 1/8 Female thread Gx 1/4 Female thread G¼ 3/8 Female thread Gy 1/2 Female thread G½ 3/4 Female thread G¾ QS-3 Push-in connector for tubing O.D. 3 mm QS-4 Push-in connector for tubing O.D. 4 mm QS-6 Push-in connector for tubing O.D. 6 mm QS-8 Push-in connector for tubing O.D. 8 mm Number of valves X2 2 one-way flow control valves in one housing Generation B B series 2 Internet: Subject to change 2017/10
3 Technical data Female thread, metal One-way flow control valve GR/GRA -M- Flow rate l/min -Q- Temperature range C -L- Operating pressure bar GR-1/4 One-way flow control valve GR- X2 2 Two one-way flow control valves are combined in a housing. This allows the flow and return speed to be set separately for single- or double-acting compact cylinders, for example. 1 -M- Flow rate l/min -Q- Temperature range C -L- Operating pressure bar General technical data Valve function One-way flow control function Type GR-M3 GR-M5-B, GR-M5X2-B GR-1/8-B, GR-1/8X2-B GR-1/4 GRA-1/4-B GR-3/8-B GR-1/2 GR-3/4 Pneumatic connection 1, 2 M3 M5 Gx G¼ G¼ Gy G½ G¾ Adjusting element Knurled screw Type of mounting Through-hole Through-hole Front panel mounting Front panel mounting In-line installation Mounting position Any -H- Note: This product conforms to ISO and to ISO Operating and environmental conditions Type GR-M3 GR-M5-B, GR-M5X2-B GR-1/8-B, GR-1/8X2-B GR-1/4 GRA-1/4-B GR-3/8-B GR-1/2 GR-3/4 Operating pressure [bar] Operating medium Compressed air to ISO :2010 [6:4:4] [7:4:4] [7: : ] [7:4:4] [7: : ] Note on operating/pilot medium Lubricated operation possible (in which case lubricated operation will always be required) Ambient temperature [ C] Temperature of medium [ C] Storage temperature [ C] /10 Subject to change Internet: 3
4 Technical data Female thread, metal Standard nominal flow rate qnn at 6 bar > 5 bar as a function of spindle rotations n GR-M3 GR-M5-B, GR-1/8-B qnn [l/min] GR-M5-B GR-1/8-B n GR-M5X2-B GR-1/8X2-B GR-M5X2-B (Regulating screw closed) GR-M5X2-B (Regulating screw open) GR-1/8X2-B (Regulating screw closed) GR-1/8X2-B (Regulating screw open) 4 Internet: Subject to change 2017/10
5 Technical data Female thread, metal Standard nominal flow rate qnn at 6 bar > 5 bar as a function of spindle rotations n GRA-1/4-B GR-3/8-B, GR-1/2, GR-3/4 qnn [l/min] qnn [l/min] n n Materials Sectional view One-way flow control valve Nut GR-M5-B, GR-M5X2-B, GR-1/8-B, GR-1/8X2-B: Wrought aluminium alloy GR-1/4, GRA-1/4-B, GR-3/8-B, GR-1/2, GR-3/4: Steel 2 Regulating screw GR-M3, GRA-1/4-B, GR-3/8-B, GR-1/2, GR-3/4: Brass GR-M5-B, GR-M5X2-B, GR-1/8-B, GR-1/8X2-B: High-alloy steel GR-1/4: Galvanised steel 3 Housing GR-M3, GR-M5-B, GR-M5X2-B, GR-1/8-B, GR-1/8X2-B, GR-1/4, GR-3/4: Wrought aluminium alloy GRA-1/4-B, GR-3/8-B, GR-1/2: Die-cast zinc Seals Nitrile rubber Note on materials RoHS compliant 2017/10 Subject to change Internet: 5
6 Technical data Female thread, metal Dimensions GR-M3 Download CAD data Dimensions GR-M5-B, GR-1/8-B Download CAD data -H- Note: This product conforms to ISO and to ISO Cover cap GRK 10 2 Hex nut GRM 10 Type Connection B1 D2 D3 D4 H1 H2 H3 H4 H5 H6 H7 L1 L2 ß 1 ß 2 D1 min. max. max. ±0.1 GR-M5-B M M10x GR-1/8-B Gx M12x Internet: Subject to change 2017/10
7 Technical data Female thread, metal Dimensions GR-M5X2-B Download CAD data -H- Note: This product conforms to ISO and to ISO Cover cap GRK 10 Hex nut GRM 10 GR-1/8X2-B -H- Note: This product conforms to ISO and to ISO Cover cap GRK 10 Hex nut GRM 10 Type Connection B1 D2 D3 D4 H1 H2 H3 H4 H5 D1 min. max. GR-M5X2-B M M10x GR-1/8X2-B Gx M12x Type H6 H7 H8 H9 L1 L2 L3 L4 L5 ß 1 ß 2 GR-M5X2-B GR-1/8X2-B ± ± /10 Subject to change Internet: 7
8 Technical data Female thread, metal Dimensions GR-1/4 Download CAD data Type Connection B1 D2 D3 H1 H2 H3 L1 L2 L3 ß 1 D1 GR-1/4 G¼ Dimensions GRA-1/4-B GR-3/8-B Download CAD data -H- Note: This product conforms to ISO and to ISO Cover cap GRK 10 2 Hex nut GRM 10 Type Connection B1 D2 D3 D4 H1 H2 H3 H4 H5 H6 H7 D1 min. max. max. H8 L1 L2 ß 1 ß 2 GRA-1/4-B G¼ 26.5 M20x ± GR-3/8-B Gy 33 M20x Internet: Subject to change 2017/10
9 Technical data Female thread, metal Dimensions GR-1/2 GR-3/4 Download CAD data -H-Note: This product conforms to ISO and to ISO H-Note: This product conforms to ISO and to ISO Ordering data One-way flow control function Knurled screw Pneumatic connection Standard nominal flow rate qnn at 6 bar > 5 bar Weight Part No. Type In direction of flow control In non-return direction 2 1 [l/min] [l/min] [g] M3 M GR-M3 M5 M GR-M5-B Gx Gx GR-1/8-B G¼ G¼ GRA-1/4-B Gy Gy GR-3/8-B G½ G½ GR-1/2 G¾ G¾ GR-3/4 G¼ G¼ GR-1/4 M5 M GR-M5X2-B Gx Gx GR-1/8X2-B 2017/10 Subject to change Internet: 9
10 Accessories Hex nut GRM For front panel mounting Material: Steel Ordering data For type Description Part No. Type GR-M5-B, GR-M5X2-B Thread M10x GRM-M5 GR-1/8-B, GR-1/8X2-B Thread M12x GRM-1/8 GRA-1/4-B, GR-3/8-B Thread M20x GRM-3/8 Cover cap GRK Material: PP Ordering data For type Description Part No. Type GR-M5-B, GR-M5X2-B Thread M10x GRK-M5 GR-1/8-B, GR-1/8X2-B Thread M12x GRK-1/8 GRA-1/4-B, GR-3/8-B Thread M20x GRK-3/8-B 10 Internet: Subject to change 2017/10
11 One-way flow control valves GR, in-line installation Technical data Push-in connector QS, polymer One-way flow control valve GR -M- Flow rate l/min -Q- Temperature range C -L- Operating pressure bar General technical data Valve function One-way flow control function Pneumatic connection 2 QS-3 QS-4 QS-6 QS-8 Pneumatic connection 1 QS-3 QS-4 QS-6 QS-8 Adjustment component Knurled screw Type of mounting Via through-hole Front panel mounting Via accessories Mounting position Any Operating and environmental conditions Operating pressure [bar] Operating medium Compressed air in accordance with ISO :2010 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Ambient temperature [ C] Temperature of medium [ C] Storage temperature [ C] /10 Subject to change Internet: 11
12 One-way flow control valves GR, in-line installation Technical data Push-in connector QS, polymer Standard nominal flow rate qnn at 6 > 5 bar as a function of turns of the adjusting screw n GR-QS-3, GR-QS-4 Standard flow rate qn at 6 > 0 bar as a function of turns of the adjusting screw n GR-QS-3, GR-QS-4 GR-QS-3 GR-QS-4 GR-QS-6, GR-QS-8 GR-QS-6, GR-QS-8 GR-QS-6 GR-QS-8 Materials Sectional view One-way flow control valve 1 Adjusting screw High-alloy steel 2 Housing PA, reinforced 3 Releasing ring POM Seals NBR Note on materials RoHS-compliant 12 Internet: Subject to change 2017/10
13 One-way flow control valves GR, in-line installation Technical data Push-in connector QS, polymer Dimensions Knurled screw Download CAD data 1 Cover cap GRK 14 2 Hex nut GRM 14 Type Tubing O.D. D1 B D2 D3 D4 H1 H2 H3 H4 min. max. GR-QS M10x1 4.3 ± GR-QS M10x1 4.3 ± GR-QS M12x1 4.3 ± GR-QS M12x1 4.3 ± Type H5 H6 H7 H8 H9 H10 L1 L2 L3 ß 1 ß 2 max. GR-QS GR-QS GR-QS GR-QS Ordering data One-way flow control function Knurled screw Pneumatic connection Standard nominal flow rate qnn at 6 > 5 bar Weight Part No. Type in direction of flow control in non-return direction 2 1 [l/min] [l/min] [g] QS-3 QS GR-QS-3 QS-4 QS GR-QS-4 QS-6 QS GR-QS-6 QS-8 QS GR-QS /10 Subject to change Internet: 13
14 One-way flow control valves GR, in-line installation Accessories Retainer GR-H For mounting on a flat surface via M3 screws. The one-way flow control valve is snapped into the retainer. The retainer can be fitted in any position. Material: POM Free of copper and PTFE Linking of multiple retainers via dovetail slot Dimensions and ordering data For type B B1 D D1 D2 H H1 H2 GR-QS-3, GR-QS GR-QS-6, GR-QS For type H3 H4 L L1 Weight Part No. Type [g] GR-QS-3, GR-QS GR-H-QS-3-4 GR-QS-6, GR-QS GR-H-QS-6-8 Hex nut GRM For front panel mounting Material: Steel Ordering data For type Description Part No. Type GR-QS-3, GR-QS-4 Thread M10x GRM-M5 GR-QS-6, GR-QS-8 Thread M12x GRM-1/8 Cover cap GRK Material: PP Ordering data For type Description Part No. Type GR-QS-3, GR-QS-4 Thread M10x GRK-M5 GR-QS-6, GR-QS-8 Thread M12x GRK-1/8 14 Internet: Subject to change 2017/10
15 Festo North America 1 Festo Canada 2 Montréal 3 Québec City Headquarters Festo Inc Explorer Drive ississauga, O L W , Trans-Canada Pointe-Claire, QC , rue Watt 11 Québec, QC Festo United States 5 Appleton 7 etroit Headquarters Festo Corporation 395 Moreland Road orth 9 Tower iew Drive, Suite Greenville, WI 5 9 auppauge, 11 6 Chicago 8 5 W Algonquin - Suite 3 0 Arlington eights, IL West Long Lake Road Troy, MI 09 Silicon Valley 935 Southfront Road, Suite F Livermore, CA Festo Regional Contact Center Canadian Customers Commercial Support: Tel: 1 O FESTO Fax: 1 F FESTO festo canada ca festo com USA Customers Commercial Support: Tel: FESTO Fax: FESTO customer service us festo com Technical Support: Tel:1 O FESTO Fax:1 F FESTO technical support ca festo com Technical Support: Tel:1 O FESTO Fax: FESTO product support us festo com C Sub ect to change Internet:
One-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
Flow control valves GRO, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal Flow control function connection 2 connection 1 qnn 1) [l/min]
Front panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
Pre-assembled plug connectors Product range overview
Pre-assembled plug connectors Product range overview Function Electrical connection Type Cable connector Version Page/Internet Round plug connector Plug M8, 3-pin SEA-3GS-M8-S Pg7 Straight/ SEA-GS-M8 Pg7
-Q- Temperature range C. -L- Operating pressure bar CRVZS-5/10/20 with condensate drain. Air reservoirs CRVZS Technical data
Air reservoirs Air reservoirs CRVZS Function CRVZS-0.1/0.4/0.75/2 -Q- Temperature range 10 +100 C -L- Operating pressure 0.95 16 bar CRVZS-5/10/20 with condensate drain The reservoirs can be used to compensate
Reverse jet pulse valves VZWE, solenoid actuated
Key features and product range overview Function Reverse jet pulse valves VZWE are piloted 2/2-way valves. They generate pulses of compressed air using a suitable solenoid coil for mechanically cleaning
Quick exhaust valves VBQF
Product range overview and type codes Function Higher piston speeds can be achieved on the return stroke of single and double-acting drives with the quick exhaust valves VBQF. Compressed air flows from
Solenoid valves VOVG Product range overview
Valve series VOVG Product range overview Function Symbol Version Normally Voltage [V DC] Page/ open closed 5 12 2 Internet /2-way valve In-line valve 8/vovg Semi in-line valve Sub-base valve 5/2-way valve
Silencers. Festo core product range Covers 80% of your automation tasks
Silencers q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
Angle seat valve VZXF, NPT
Angle seat valve VZXF, NPT -V- New Angle seat valve VZXF, NPT Key features Function Angle seat valves are externally actuated valves. These valves are actuated by a direct supply of compressed air. In
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Solenoid valves VZWF, force pilot operated
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Mini slides DGSC Key features
Key features At a glance Properties Smallest guided slide unit (width 8 mm), therefore high component density possible Precision ball bearing cage guide permits accurate linearity/ parallelism Long service
Mini guided cylinders DFC
Product range and peripherals overview Function Version Type Piston Stroke [mm] [mm] Doubleacting DFC 4 5, 10, 15, 20 6 5, 10, 15, 20, 25, 0 10 5, 10, 15, 20, 25, 0 Piston 4 mm Piston 6, 10 mm Integrated
Twin cylinders DPZ/DPZJ
Key features High force with excellent protection against torsion 100 to 1,000 N thrust at 6 bar operating pressure Load capacity (F q ) from 8 to 105 N F q max. Permissible torque load (T L ) centrally
Pressure and vacuum switches PEV/VPEV
Pressure and vacuum switches PEV/VPEV Pressure and vacuum switches PEV/VPEV Product range overview Function Design Type Operating pressure Pneumatic connection Mechanical pressure switches Electrical connection
Fittings NPCK Key features
Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
Proportional directional control valves MPYE
Key features General information The directly actuated proportional directional control valve has a position-controlled spool. This transforms an analogue input signal into a corresponding opening cross-section
Parallel grippers HGP, with protective dust cap
Key features At a glance Double-acting piston drive With protective dust cap for use in dusty environments (protection class IP54) Self-centring Variable gripping action: External/internal gripping High
Suction cup holders ESH
Suction cup holders ESH Suction cup holders ESH Type codes ESH HCL 4 QS Type ESH Suction cup holder Suction cup holder HA HB HC HCL HD HDL HE HF Vacuum port on top, mounting via lock nut, without height
Quarter turn actuators DFPD
Quarter turn actuators DFPD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
Parallel grippers HGPC
Key features At a glance General The compact and low-cost parallel gripper consists of a two-part symmetrical housing. The piston moves traverse to the half-shell casing in an optimum housing design that
Positioners CMSX. Festo core product range Covers 80% of your automation tasks
Positioners CMSX q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Universal plug connectors, for self-assembly
Universal plug connectors, for self-assembly Universal plug connectors, for self-assembly Product range overview Function Version Type Connection technology Connection cross section Degree of [mm 2 ] protection
Compact cylinders ADVUL
Piston rod secured against rotation by means of guide rods and yoke plate Profile slots for proximity sensors Extensive range of accessories 2016/03 Subject to change Internet: www.festo.com/catalog/...
Stopper cylinders DFST
Key features At a glance Gentle stopping without impact vibration or noise Single-acting or double-acting Powerful shock absorber for high energy absorption Wide range of applications thanks to adjustable
Linear drives SLM, with guided slide
Key features Version The linear drive SLM is a combination of a slide unit and a rodless linear drive. The drive moves the slide. The transmission of movement is accomplished via a magnetic coupling. The
-H- Note. Pinch valves VZQA Features
Features Application Design Areas of application The valve can be used to control liquid and dusty media, solids and material mixtures Easy-to-clean housing (clean design) Open or closed in normal position
Lubricators MS-LOE, MS series, NPT
Lubricators MS-LOE, MS series, NPT Peripherals overview 5 3 4 1 -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or MS12 Internet: rmv, armv 2 1 2/3/4/5 2/3/4/5 Mounting
Guide units FEN/FENG for ISO cylinders
Key features At a glance The guide units FEN and FENG protect ISO cylinders against torsion when these are subjected to high torque loads. They offer high precision guidance for workpiece handling and
Pressure regulators MS-LR, MS series, NPT
Pressure regulators MS-LR, MS series, NPT Peripherals overview Pressure regulator MS9-LR 4 5 -H- Note 3 1 Additional accessories: Module connector for combinations with size MS6, MS9 or MS12 Internet:
Semi-rotary drives DSR/DSRL
Wide variety of mounting options Infinitely adjustable swivel angle Comprehensive range of accessories 2017/10 Subject to change Internet: www.festo.com/catalog/... 1 Features Brief description In these
-H- Note. Protective conduits Technical data. Protective conduit MKV. Materials: PVC, spring steel
Technical data Protective conduit MKV Materials: PVC, spring steel Note on materials: RoHS-compliant 1 Protective conduit MKV 2 Protective conduit fitting MKVV 3 Lock nut MKVM For protecting pneumatic
Lubricators LOE, D series
Lubricators LOE, D series Product range overview D series service units, metal design Type Size Pneumatic connection Pressure regulation range [bar] Grade of filtration [μm] M5 M7 Gx G¼ Gy G½ G¾ G1 QS4
Rotary indexing tables DHTG
Key features At a glance Sturdy mechanical system Easy planning and commissioning Indexing: 2, 3, 4, 6, 8, 12, 24 Integrated functions: Overload protection Sensor function Cushioning adjustment Speed setting
Piston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
-H- Note. Sub-bases VABP Key features
Key features At a glance The sub-base VABP can be used to help realise specific switch-off behaviour when switching off the valve load voltage. It is a single-channel solution for uncoupling the drive
Stopper cylinders DFSP
Key features At a glance Versions: Trunnion Trunnion with female thread Roller Single-acting, pulling Double-acting with spring, pulling Double-acting without spring With or without protection against
Swivel/linear drive units DSL-B
Key features At a glance High repetition accuracy thanks to cushioning components with fixed stop Swivel angle can be infinitely and accurately set The mechanical gearing between the stop element and swivel
Handling modules HSP
Handling modules HSP Handling modules HSP Key features at a glance Field of application Special features The handling module is a new generation of function modules for the automatic transfer, feed and
Check valves H/HA/HB/HGL
Check valves H/HA/HB/HGL q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Parallel grippers HGPP, precision
Key features 1 3 4 At a glance Wide range of variants for greater flexibility: Double-acting piston drive HGPP-...-A. Compression springs for supporting or retaining gripper forces, or for use as a singleacting
Pressure Regulators MS4N-LR/LRB Inch Series
Pressure Regulators MS4N-LR/LRB Inch Series The pressure regulator maintains a constant working pressure (secondary side), regardless of the pressure variations in the system (primary side) and the air
On-off valves MS-EM/EE, MS series, NPT
On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12
Threaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
Three-dimensional gantries
Key features At a glance A three-dimensional gantry (YXCR) is an assembly of several axis modules (EHM /DHMZ) to produce a movement in 3D space. Can be used universally for handling light to very heavy
Pressure sensors SPAU
Key features At a glance Product description The pressure sensor SPAU is suitable for monitoring compressed air and noncorrosive gases. The variant with display offers the option of reading the pressure
Linear drives DGPL Selection aid
Linear drives DGPL Linear drives DGPL Selection aid General Compact, fitting length relative to stroke Highly adaptable thanks to wide choice of mounting and attachment options Adjustable end-position
Semi-rotary actuators DSR/DSRL - Inch Series
Semi-rotary actuators DSR/DSRL - Inch Series Wide variety of mounting options Infinitely adjustable rotation angle DSR Comprehensive range of accessories DSRL Product range overview Function Version Double-acting
Cantilever axes DGEA, with toothed belt drive
Features Key features at a glance Super flat Ω drive head enabling high mechanical torques. High-quality guide as for DGE-KF/ DGP-KF axis. Improved dynamics compared to toothed belt axis DGE-ZR in cantilever
On-off/Soft-start Valves MS12N-EM/EE/DL/DE Inch Series
On-off/Soft-start Valves MS12N-EM/EE/DL/DE Inch Series Manually operated and solenoid actuated on-off valves for pressurizing and venting pneumatic installations. Pneumatic and solenoid actuated soft-start
Parallel grippers DHPS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws Oval piston for high gripping forces High gripping forces with compact
Round Cylinders DSNU, Double-acting Inch Series
Round Cylinders DSNU, Double-acting Inch Series Piston 5/16 to 2-1/2 Stroke lengths up to 20 Double-acting Meets the highest requirements for running characteristics, service life and load carrying ability
Threaded fittings. Festo core product range Covers 80% of your automation tasks
Threaded fittings q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Toothed belt axes ELGG
Key features At a glance Toothed belt axis with two opposing slides Optimum price/performance ratio Ready-to-install unit for quick and easy design High reliability thanks to a tested service life of 2500
Filter Regulators MS4N-LFR Inch Series
A filter regulator combines a filter and a pressure regulator into a single unit. The sintered filter with water separator removes contamination, pipe sinter, rust and condensate from the compressed air.
Vacuum generators OVEM
Key features At a glance Rapid purging of vacuum for safe placement of the workpiece by means of an integrated solenoid valve for controlling the ejector pulse Central electrical connection via an M12
Rotary drives ERMO, electric
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
-H- Note. Silencers Product range overview. Version Type Connection D1 Push-in connector. For tubing I.D. Push-in sleeve diameter.
Silencers Silencers Product range overview Version Type Connection Push-in connector Sintered metal For tubing I.D. Push-in sleeve diameter Noise level M thread G thread NPT thread [db (A)] U-PK-3 3 70
-Q- Temperature range C. -L- Operating pressure bar. Vacuum filters ESF Technical data. Function
Vacuum filters Vacuum filters ESF Function -Q- Temperature range 0 +60 C -L- Operating pressure 0.95 +4 bar Accessory for the suction gripper ESG, mounted between suction cup holder and suction cup with
Silencers. Festo core product range Covers 80% of your automation tasks
Silencers q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
Solenoid valves MFHE/Pneumatic valves VLHE
Solenoid valves MFHE/Pneumatic valves VLHE Solenoid valves MFHE/Pneumatic valves VLHE Peripherals overview 2 1 4 3 5 Accessories MFHE VLHE Page/Internet 1 Solenoid coil MSFG/MSFW 8 2 Plug socket with cable
Standard cylinders DNC-C180, to ISO 15552
-U- Type discontinued Available up until 2016 Standard cylinders DNC-C180, to ISO 15552 Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552
Vacuum generators Key features
Vacuum generators Vacuum generators Key features Product overview Vacuum generator All Festo vacuum generators have a single-stage design and operate according to the venturi principle. The product families
Proportional pressure regulators MPPES
Product range overview Function Type Circuit symbol Design Pneumatic connection 1 Proportional pressure regulators With proportional solenoid MPPES Directly actuated valve Nominal size pressurise/ exhaust
Multiple distributors QS
Multiple distributors QS Easy to insert Easy to release Up to 6 outlets 360 rotatable 2018/07 Subject to change Internet: www.festo.com/catalogue/... 1 Multiple distributors QS Key features Simply "plug
Semi-rotary drives DRQ
Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree
Multiple distributors QS, Quick Star
Multiple distributors QS, Quick Star Easy to insert Easy to release Up to 6 outlets 360 rotatable 2016/01 Subject to change Internet: www.festo.com/catalogue/... 1 Multiple distributors QS, Quick Star
Pneumatic valves VUWS/valve manifold VTUS
Pneumatic valves VUWS/valve manifold VTUS -V- New VUWS-LT25, VTUS-25 Pneumatic valves VUWS/valve manifold VTUS Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with
Short-stroke cylinders ADNE-LAS, with linear motor
Key features At a glance Properties Electric short-stroke cylinder with integrated linear motor, specifically designed for dynamic movements between two end positions A cycle of advancing and retracing
Positioning axes DMES
Positioning axes DMES Positioning axes DMES Key features At a glance General Properties Range of applications DMES positioning axes are mechanical linear drives that are specially designed for movements
-H- Note. Clip fix tool AGTC Key features
Key features At a glance Principle The clip fix tool AGTC is a pneumatic mounting device for clips of different designs. Pressing the clip fix tool with attached clip adapter 1) and clip against the chosen
Ball valves and shut off valves
Shut off valves HE Hand slide valves W Ball valves QH, manually actuated Ball valves VAPB, mechanically actuated Ball valves VAPB CR, mechanically actuated, corrosion resistant 2003/10 Subject to change
Slide units SPZ, twin piston
Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits www.festo.com
Pneumatic valves VUWS/valve manifold VTUS
Pneumatic valves VUWS/valve manifold VTUS -V- New VUWS-LT25, VTUS-25 Pneumatic valves VUWS/valve manifold VTUS Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with
Lubricators LOE, D series
Lubricators LOE, D series Product range overview D series service units, metal design Type Size Pneumatic connection Pressure regulation range [bar] Grade of filtration [μm] M5 M7 Gx G¼ Gy G½ G¾ G QS4
Solenoid valves VUVS/valve manifold VTUS, NPT
Solenoid valves VUVS/valve manifold VTUS, NPT Solenoid valves VUVS/valve manifold VTUS, NPT Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with a long service life
Solenoid valves MHJ, fast-switching valves
Solenoid valves MHJ, fast-switching valves Solenoid valves MHJ, fast-switching valves Key features Innovative Versatile Reliable Easy to install Individual electrical connection via connecting cable and
On-off/soft-start valves HE/HEE/HEP/HEL, D series
On-off/soft-start valves HE/HEE/HEP/HEL, D series On-off/soft-start valves HE/HEE/HEP/HEL, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic connection
-M- Flow rate 100 l/min. M5 Compact System Key features
M5 Compact System Key features -M- Flow rate 100 l/min Forms the basis for compact pneumatic control systems M5 elements with 2n sub-bases Control cabinet installation Easy mounting Fast replacement of
Feed separators HPVS
Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top
Round Cylinders ESNU, Single-acting Inch Series
Round Cylinders ESNU, Single-acting Inch Series Piston 5/16Ė to 2-1/2Ė Stroke lengths up to 2Ė Single-acting, spring return Meets the highest requirements for running characteristics, service life and
Semi-rotary drives DRVS
Key features Key features at a glance Double-acting semi-rotary drive with rotary vanes Lighter than other semi-rotary drives Modern and compact design Fixed swivel angle Swivel angle can be adjusted with
Order guide for standalone valves VUVS/VUVG
VUVS/VUVG VUVS Type codes VUVS Valve design In-line valve, individual valve Design principle Piston spool with sealing cartridge Piston spool with sealing ring Width/max. flow rate 21 mm / 700 l/min 26.5
Quarter turn actuators DFPD
Quarter turn actuators DFPD Quarter turn actuators DFPD Key features Function The DFPD series features a rack and pinion combination with a constant torque characteristic across the entire swivel range.
Push-in fittings CQ, for push-fit piping systems
Key features General information Suitable for polyamide pipes PQ-PA and aluminium pipes PQ-AL 12, 15, 18, 22 and 28 mm Internet: pq Suitable for polyamide tubing PAN and polyurethane tubing PUN 12 mm Internet:
Cartridge cylinders EGZ
Peripherals overview and type codes 7 Installation without mounting attachments Minimal installation space required 4 3 2 1 Mounting attachments and accessories Description 1 Swivel mounting WBN 2 Flange
Self-closing/rotary push-in fittings QS
Self-closing/rotary push-in fittings QS Self-closing/rotary push-in fittings QS Key features Application Simply plug and work Reliably connected Captive seal Effortless selection of the right fitting.
Branching modules FRM/Distributor blocks FRZ, D series
Branching modules FRM/Distributor blocks FRZ, D series Branching modules FRM/Distributor blocks FRZ, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic
Solenoid valves VZWP, servo-controlled
Key features and overview Function The solenoid valve VZWP-L- is a servo-controlled 2/2-way valve with solenoid coil. The solenoid valve is closed when de-energised. When energised, the differential pressure
Solenoid valves MH2/MH3/MH4, fast-switching valves
Solenoid valves MH2/MH3/MH4, fast-switching valves Fast-switching valves from Festo: it's not just the switching that's fast The fast-switching professionals with response times down to 2 milliseconds
Front panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
Lubricators MS-LOE, MS series
Lubricators MS-LOE, MS series Lubricators MS-LOE, MS series Product range overview MS series service units Type Size Pressure regulation range [bar] Grade of filtration [μm] Pneumatic connection in housing
Pre-assembled plug connectors Product range overview
Pre-assembled plug s Product range overview Function Electrical connection Type Cable Version Page/Internet Round plug M8, 3-pin SEA-3GS-M8-S Pg7 Straight/ SEA-GS-M8 Pg7 Straight/ solder lug M12, -pin
-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
Quarter turn actuators DFPB
Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn
Pressure Regulators MS-LR, Inch Series Overview
Pressure Regulators MS-LR, Inch Series Overview High flow rate with minimal pressure drop Suitable for front panel mounting 2 sizes: MS4 grid dimension.6 in, MS6 grid dimension 2.4 in Detailed product
-H- Note. Angle grippers HGWC Key features. 2 Internet:
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
Quarter turn actuators DFPB
Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn