-H- Note. Sub-bases VABP Key features

Transcription

1

2 Key features At a glance The sub-base VABP can be used to help realise specific switch-off behaviour when switching off the valve load voltage. It is a single-channel solution for uncoupling the drive from the power valve. 4 switch-off functions are possible. The sub-base is not a safety device, nor is it a complete safety solution. However, it can form part of a safety solution. Features: Compact design Simple installation Suitable for servopneumatic drives Can be attached directly to the proportional directional control valve VPWP Connecting cable for direct connection to the proportional directional control valve VPWP Suitable for cylinders that are controlled by 5/2- or 5/3-way valves For ISO valves with spring return and external auxiliary pilot air Extended accessories: ISO solenoid valves with switching position sensing for producing a diagnostic rate 60% The technology in detail Sub-base VABP (example with valves mounted) 2 Pilot air port 3 Function port B 4 Function port A 5 Solenoid valve VSVA, MNH 6 Proportional directional control valve VPWP 7 Mounting screws The 4 different single-channel switchoff functions can be configured using function ports 32 (A) and 34 (B): Stopping a movement: blocking De-energising: exhausting Reversing with reduced speed Switching off power: short-circuit VAPB B A -H- Note An application document "Demonstrating VABP protective measures" is available from the Support Portal. 2 Internet: Subject to change 206/03

3 Type codes VABP S3 26VG G8 2M R3 Series VABP Sub-base Allocation S3 ISO 5407 S ISO 5599 Size 26 Size 26 Size 2 Size 2 Version V Switching variant emergency stop functions Connection type G Pneumatic port G8 G/8 G4 G/4 G38 G3/8 Supply air/exhaust air/pilot air supply/pilot exhaust air Valve positions 2 2 valve positions Equipment M With valves Electrical connection Without R3 Individual plug M2 A Individual plug type A 206/03 Subject to change Internet: 3

4 Peripherals overview VABP-S3-26VG / VABP-S-VG 8 aa aj ab 2 5 ab ab ag ac 4 ad ae af ag ac ad ae af ag ac ad ae af VABP-S-2VG bj ai ah ab 6 ba 2 ag ac ad ae af 4 Internet: Subject to change 206/03

5 Peripherals overview Accessories See allocation table below Description Page/ Internet Proportional directional control valve VPWP 2 Sub-base VABP 7 Connecting cable NEDV 8 Connecting cable NEBU-M2 9 Plug socket MSSD-EB aj Plug socket with cable KMEB aa Connecting cable NEBU-M8 ab Push-in fitting QS ac Blanking plug B ad Push-in fitting QS ae Exhaust air flow control valve GRE af Silencer UC ag Push-in fitting QS ah Solenoid coil MSNG ai Connecting cable KMC bj Plug socket MSSD-C ba Plug NECU 5/3-way proportional directional control valve for applications with Soft Stop and for pneumatic positioning For realising specific switch-off functions 6 Connection of solenoid valve to proportional directional control 5 valve VPWP Connection of solenoid valve to controller. 5 Alternative to 7 Connection of solenoid valve to controller. 5 Alternative to aj Connection of solenoid valve to controller 5 Connection of switching position sensing system to controller 5 For working ports 2 and 4 5 For function ports 32 and 34 4 For realising a switch-off function For function ports 32 and 34 5 For realising a switch-off function For function ports 32 and 34 4 For realising a switch-off function For function ports 32 and 34 4 For realising a switch-off function For pilot air port 4 5 For actuating the solenoid valve 4 Connection of solenoid valve to controller 5 Connection of solenoid valve to controller. Alternative to ai For connecting the solenoid valves to the proportional directional control valve VPWP vpwp 5 5 Allocation table Sub-base Solenoid valve ( 4) Proportional directional control valve 3 VABP-S3-26VG VSVA-B-M52-MZH-A-R5L VPWP-4/-6 4 VABP-S3-26VG VSVA-B-M52-MZ-A-C-APP ) VPWP-4/-6 5 VABP-S-VG VSVA-B-M52-MZD-D-R5L VPWP-8 6 VABP-S-2VG MNH-5/2-D-2-FR-S-C VPWP-0 ) Solenoid valve with switching position sensing 206/03 Subject to change Internet: 5

6 Technical data -M- Flow rate l/min -L- Pressure 0 6 bar General technical data Type VABP-S3-26VG VABP-S-VG VABP-S-2VG For proportional directional control valve VPWP-4/-6 VPWP-8 VPWP-0 Width [mm] Pneumatic port Working ports: 2, 4, 22, 44 Gx G¼ Gy Pilot air supply: 4 M5 Gx Gx Function ports: 32, 34 Gx Gx G¼ Nominal flow rate [l/min] Mounting position Any Product weight [g] With valves [g] With solenoid valve Valve function 5/2 Reset method Mechanical spring Type of control Piloted Pilot air supply External Direction of flow Reversible Switching position sensing Yes Switching element function N/C contact Switching output PNP Nominal width 9 Actuation type Electrical Manual override Without or covered Nominal operating voltage [V] 24 Perm. voltage fluctuations [%] ±0 ±0 5/±0 Allocation table, solenoid valve VSVA-B-M52-MZH-A-R5L 2 VSVA-B-M52-MZ-A-C-APP 3 VSVA-B-M52-MZD-D-R5L 4 MNH-5/2-D-2-FR-S-C 6 Internet: Subject to change 206/03

7 Technical data Operating and environmental conditions Type VABP-S3-26VG VABP-S-VG VABP-S-2VG Operating medium ) Compressed air to ISO 8573-:200 [6:4:4] Operating pressure ) [bar] 0 6 Pilot pressure with valves [bar] 3 8 Ambient temperature [ C] Temperature of medium [ C] ) Note operating range of connected components. Materials Manifold rail O-ring Screws Note on materials Wrought aluminium alloy NBR Steel RoHS-compliant Configuring the switch-off functions The sub-base is not a safety device, nor is it a complete safety solution. However, it can form part of a safety solution. Suitable accessories must be mounted at the function ports [32] and [34] in order to configure the different switch-off functions. Sub-base Silencer Blanking plug Exhaust air flow control valve Push-in fitting VABP-S3-26VG U-x B-x GRE-x QS-Gx-4, 6 or 8 VABP-S-VG U-x B-x GRE-x QS-Gx-4, 6 or 8 VABP-S-2VG U-¼ B-¼ GRE-¼ QS-G¼-6, 8 or 0 Switch-off variants Circuit : Stopping a movement blocking When the valves are switched off, the movement of the drive will be stopped. Note: Following actuation of the switchoff function, the drive will be under pressure In the case of a vertical mounting position, it is possible that the payload will slowly drop Blanking plug 206/03 Subject to change Internet: 7

8 Technical data Switch-off variants Circuit 2: De-energising exhausting When the valves are switched off, the drive will be exhausted. Note: Not suitable for a vertical mounting position without additional safety functions If the exhaust air flow control valves are closed, the drive will not be exhausted Exhausting is also possible via the silencer Exhaust air flow control valve or silencer Circuit 3: Reversing (advancing) and reducing speed When the solenoid valves are switched off, the movement of a retracting drive is reversed with simultaneous reduction of speed. The drive travels into the end position. Note: The holding function is time-limited To generate the reversing movement even in the event of compressed air failure, an air reservoir with non-return function can be inserted at port [32] for compressed air supply. Exhaust air flow control valve 2 Push-in fitting 2 8 Internet: Subject to change 206/03

9 Technical data Switch-off variants Circuit 4: Reversing (retracting) and reducing speed When the solenoid valves are switched off, the movement of an extending drive is reversed with simultaneous reduction of speed. The drive travels into the end position. Note: The holding function is time-limited To generate the reversing movement even in the event of compressed air failure, an air reservoir with non-return function can be inserted at port [34] for compressed air supply. Push-in fitting 2 Exhaust air flow control valve 2 Circuit 5: Switching off power short-circuit When the valves are switched off, the two chambers are interconnected. The drive comes to a stop. Note: Following actuation of the switchoff function, the drive will be under pressure Not suitable for a vertical mounting position without additional safety functions To restrict the run-out movement, it is recommended that a thin tube (4 or 6 mm) or a flow control valve (e.g. GRO...) is used for connecting the ports [32] and [34]. Push-in fitting 2 Exhaust air flow control valve 3 One-way flow control valve /03 Subject to change Internet: 9

10 Technical data Dimensions VABP-S3-26VG Download CAD data -H- Note Mounting only via the proportional directional control valve VPWP is not sufficient. The sub-base must also always be mounted directly using the through holes D4. B B2 B3 B4 B5 B6 B7 B8 With valves D D2 D3 D4 D5 H H2 H3 Gx Gx M5 5.5 M4 With valves H4 H5 H6 H7 H8 H9 L L2 ±0. ± With valves L3 L4 L5 L6 L7 L8 L9 L0 With valves ±0. ±0. ±0. ± Internet: Subject to change 206/03

11 Technical data Dimensions VABP-S-VG Download CAD data -H- Note Mounting only via the proportional directional control valve VPWP is not sufficient. The sub-base must also always be mounted directly using the through holes D4. B B2 B3 B4 B5 B6 B7 B8 With valves D D2 D3 D4 D5 H H2 H3 G¼ Gx Gx 5.5 M4 With valves H4 H5 H6 H7 H8 H9 L L2 ±0. ± With valves L3 L4 L5 L6 L7 L9 L0 With valves ±0. ±0. ± /03 Subject to change Internet:

12 Technical data Dimensions VABP-S-2VG Download CAD data -H- Note Mounting only via the proportional directional control valve VPWP is not sufficient. The sub-base must also always be mounted directly using the through holes D4. B B2 B3 B4 B5 B6 B7 B8 With valves D D2 D3 D4 D6 D7 H H2 H3 H3 Gy G¼ Gx With valves H3 H4 H5 H6 H7 H8 H9 L ±0. ± With valves L2 L3 L4 L5 L6 L8 L9 T With valves 200 ±0. ± Internet: Subject to change 206/03

13 Technical data Ordering data Nominal flow rate Part No. Type VABP-S3-26VG-G VABP-S-VG-G VABP-S-2VG-G38-2 With valves VABP-S3-26VG-G8-2M-R VABP-S-VG-G4-2M-R VABP-S-2VG-G38-2M-A -H- Note The solenoid valve VSVA with switching position sensing must be ordered separately 4 206/03 Subject to change Internet: 3

14 Accessories Ordering data Solenoid valve Description Part No. Type PU ) For sub-base: VABP-S3-26VG-G VSVA-B-M52-MZH-A-R5L For sub-base: VABP-S3-26VG-G8-2 With switching position sensing via inductive proximity sensor VSVA-B-M52-MZ-A-C-APP For sub-base: VABP-S-VG-G VSVA-B-M52-MZD-D-R5L For sub-base: VABP-S-2VG-G MNH-5/2-D-2-FR-S-C Solenoid coil For solenoid valve: MNH-5/2-D-2-FR-S-C MSNG-24DC-OD Blanking plug For realising a switch-off function 3568 B-x B-¼ Silencer For realising a switch-off function 649 UC-x UC-¼ Exhaust air flow control valve For realising a switch-off function 035 GRE-x 0352 GRE-¼ One-way flow control valve For realising a switch-off function GR-QS GR-QS-8 ) Packaging unit 4 Internet: Subject to change 206/03

15 Accessories Ordering data Description Part No. Type PU ) Push-in fitting (only use push-in fitting with sealing ring) For pilot air port 4 VABP-S3-26VG QSM-B-M VABP-S-VG QS-Gx-6 0 VABP-S-2VG QS-Gx-8 0 For function ports 32, 34 VABP-S3-26VG QS-Gx-6 0 VABP-S-VG QS-Gx-8 0 VABP-S-2VG QS-G¼-8 0 For working ports 2, 4, 22, 44 VABP-S3-26VG QS-Gx-8 0 VABP-S-VG 860 QS-G¼-0 0 VABP-S-2VG 8603 QS-Gy-2 0 Connecting cable and plug socket with cable Connection of solenoid valve to proportional directional control valve VPWP. For the solenoid valves: VSVA-B-M52-MZH-A-R5L VSVA-B-M52-MZD-D-R5L Connection of solenoid valve to controller. For the solenoid valves: VSVA-B-M52-MZH-A-R5L VSVA-B-M52-MZD-D-R5L NEDV-L2R-V7-M2W3-K-0.L-N-M8W4-0.2R NEBU-M2G5-K-2.5-LE NEBU-M2G5-K-5-LE3 Connection of solenoid valve to controller. For solenoid valve with switching position sensing VSVA-B-M52-MZ-A-C-APP 5688 KMEB--24-2,5-LED 5689 KMEB LED Connection of solenoid valve to controller. For solenoid valve: MNH-5/2-D-2-FR-S-C 3093 KMC--24DC-2,5-LED KMC--24DC-5-LED Connection of switching position sensing system to controller NEBU-M8G3-K-5-LE3 Plug and plug socket Alternative plug socket for solenoid valve. For solenoid valve with switching position sensing VSVA-B-M52-MZ-A-C-APP Alternative plug socket for solenoid valve. For solenoid valve: MNH-5/2-D-2-FR-S-C 5687 MSSD-EB MSSD-C Insulation displacement connector Connection of the connecting cable KMC to the proportional directional control valve VPWP Screw terminal Connection of the connecting cable KMC to the proportional directional control valve VPWP NECU-S-M8G4-HX NECU-S-M8G4-C2 ) Packaging unit 206/03 Subject to change Internet: 5

16 Product Range and Company Overview A Complete Suite and Company Overview Our experienced engineers provide complete support at every stage of your development process, including: conceptualization, analysis, engineering, design, assembly, documentation, validation, and production Custom Automation Components Complete custom engineered solutions Custom Control Cabinets Comprehensive engineering support and on-site services Complete Systems Shipment, stocking and storage services The Broadest Range of Automation Components With a comprehensive line of more than 30,000 automation components, Festo is capable of solving the most complex automation requirements Electromechanical Electromechanical actuators, motors, controllers & drivers Pneumatics Pneumatic linear and rotary actuators, valves, and air supply P Cs and O evices PLC s, operator interfaces, sensors and I/O devices Supporting Advanced Automation As No One Else Can! Festo is a leading global manufacturer of pneumatic and electromechanical systems, components and controls for industrial automation, ith more than, employees in national head uarters ser ing more than countries For more than years, Festo has continuously elevated the state of manufacturing with innovations and optimized motion control solutions that deliver higher performing, more pro table automated manufacturing and processing e uipment ur dedication to the advancement of automation extends beyond technology to the education and development of current and future automation and robotics designers with simulation tools, teaching programs, and on site services ualit Assurance SO and SO Certi cations Festo Corporation is committed to supply all Festo products and services that will meet or exceed our customers re uirements in product uality, delivery, customer service and satisfaction To meet this commitment, we strive to ensure a consistent, integrated, and systematic approach to management that will meet or exceed the requirements of the ISO 900 standard for Quality anagement and the ISO 00 standard for nvironmental anagement ISO 900 ISO 400 C Company Copyright 0, Festo Corporation hile every effort is made to ensure that all dimensions and speci cations are correct, Festo cannot guarantee that publications are completely free of any error, in particular typing or printing errors ccordingly, Festo cannot be held responsible for the same For iability and arranty conditions, refer to our Terms and Conditions of Sale, available from your local Festo of ce ll rights reserved o part of this publication may be reproduced, distributed, or transmitted in any form or by any means, electronic, mechanical, photocopying or otherwise, without the prior written permission of Festo ll technical data sub ect to change according to technical update Printed on recycled paper at ew orizon raphic, Inc, FSC certi ed as an environmental friendly printing plant

17 Festo North America Festo Canada 2 Montréal 3 Québec City Headquarters Festo Inc Explorer Drive ississauga, O L W , Trans-Canada Pointe-Claire, QC , rue Watt Québec, QC 3 4 Festo United States 5 Appleton 7 etroit Headquarters Festo Corporation 395 Moreland Road orth 9 Tower iew Drive, Suite Greenville, WI 5 9 auppauge, 6 Chicago 8 5 W Algonquin - Suite 3 0 Arlington eights, IL West Long Lake Road Troy, MI 09 Silicon Valley 935 Southfront Road, Suite F Livermore, CA Festo Regional Contact Center Canadian Customers Commercial Support: Tel: O FESTO 3 3 Fax: F FESTO festo canada ca festo com USA Customers Commercial Support: Tel: FESTO Fax: 00 9 FESTO customer service us festo com Sub ect to change Technical Support: Tel: O FESTO 3 3 Fax: F FESTO technical support ca festo com Technical Support: Tel: O FESTO 3 3 Fax: 00 9 FESTO product support us festo com Internet: