Feed separators HPVS
|
|
|
- Arabella Pitts
- 6 years ago
- Views:
Transcription
1
2 Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top or at rear 4 Supports proximity sensors that can be integrated in the housing (SME/SMT-8) Peripherals overview Accessories 1 Centring sleeve ZBH 2 Proximity sensor SMT-/SME-8 3 Push-in fitting QS Description Page/Internet For centring when mounting 10 For position sensing, can be integrated in the sensor slot 10 For connecting compressed air tubing with standard O.D. qs 2 Internet: Subject to change 2017/10
3 Type codes Type codes HPVS A Type Double-acting HPVS Feed separator Size [mm] Stroke [mm] Position sensing A Via proximity sensor 2017/10 Subject to change Internet: 3
4 Function -N- Size T- Stroke length mm General technical data Pneumatic connection M5/M3 M5/M5 Design Twin piston Piston rod Non-rotating Protection against rotation/guide Square Max. interchangeability [mm] 0.3 Repetition accuracy [mm] Cushioning None Position sensing Via proximity sensor Type of mounting Via through-hole Via female thread Mounting position Any Operating and environmental conditions Operating medium Compressed air according to ISO :2010 [7:4:4] Note on operating/pilot medium Lubricated operation possible (in which case lubricated operation will always be required) Operating pressure [bar] 3 8 Ambient temperature [ C] Protection class IP40 Corrosion resistance class CRC 1) 2 1) Corrosion resistance class 2 according to Festo standard Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents. Forces [N] Theoretical force at 6 bar, advancing Theoretical force at 6 bar, retracting Weight [g] Stroke [mm] Product weight Internet: Subject to change 2017/10
5 Materials Sectional view Feed separator 1 Housing Wrought aluminium alloy (with CompCoat) 2 End cap High-alloy steel 3 Plunger High-alloy steel 4 Piston rod High-alloy steel Seals Nitrile rubber Note on materials Free of copper and PTFE RoHS-compliant 2 -H- Note The plunger slideways in the housing are determined by the appropriate fit selected and cannot be adjusted. The necessary basic lubrication is performed during assembly. We recommend that the feed separator be re-lubricated after 2 million cycles. Max. permissible weight [g] of the add-on plunger separator for unrestricted operation Stroke External add-on plunger separator 1) ) If the max. permissible weight of the external add-on plunger separator is exceeded, the retracting and advancing times must be adapted in accordance with the table below using one-way flow control valves. Failure to do so may result in components of the feed separator being damaged. Retracting and advancing times [s] with add-on plunger separators as a function of the load [g] of the plunger separators Stroke Weight force 100 g g g g g g g g /10 Subject to change Internet: 5
6 Permissible characteristic static load values at the plungers Force F [N] Torque M x [Nm] Torque M y [Nm] Torque M r [Nm] Plunger backlash Stroke [mm] S x [mm] S z [mm] x [ ] y [ ] z [ ] Minimum clearances To prevent malfunctioning of the proximity sensors, the feed separators must comply with the minimum clearances specified in the table. For SME-8- [mm] For SMT-8- -B [mm] Internet: Subject to change 2017/10
7 Mounting options Only the mounting surface on the underside (opposite the supply ports) may be used. From above via through-hole From below via female thread Screw M3 M4 M6 Screw M4 M5 M8 Permitted tightening torque [Nm] Permitted tightening torque [Nm] Centring sleeve ZBH-7 ZBH-7 ZBH-12 Centring sleeve ZBH-7 ZBH-7 ZBH-12 Surface finish and positional accuracy of bearing surface 2017/10 Subject to change Internet: 7
8 Dimensions HPVS-22 Download CAD data 1 Sensor slot for proximity sensor 2 Supply port, advancing 3 Supply port, retracting 4 Alternative supply port 5 Centring sleeves (2 included in the scope of delivery) 6 Stroke 8 Internet: Subject to change 2017/10
9 Type B1 ±0.02 B2 B B4 D1 H13 D2 H8/h7 D3 D4 H13 D5 D6 D7 HPVS A M4 6 M5 M HPVS A M5 7.4 M5 M HPVS A M5 7.4 M5 M HPVS A M M5 M HPVS A M M5 M H1 ±0.5 Type H2 H3 H4 H5 H6 1) H7 H8 H9 H10 H11 L1 ±0.02 ±0.2 ±0.1 ±0.5 HPVS A HPVS A HPVS A HPVS A HPVS A Type L2 1) L3 L4 L5 L6 T1 T2 T3 T4 T5 T6 ±0.02 ± min. min HPVS A HPVS A HPVS A HPVS A HPVS A ) Tolerance for centring hole 0.02 Tolerance for thread and through-hole 0.1 Ordering data Size Stroke [mm] Part No. Type HPVS A HPVS A HPVS A HPVS A HPVS A 2017/10 Subject to change Internet: 9
10 Accessories Ordering data Internet: zbh For size Part No. Type PU 1) Centring sleeve ZBH 10, ZBH ZBH ) Packaging unit Ordering data Proximity sensor for T-slot, magneto-resistive Type of mounting Switching output N/O contact Insertable in the slot from above, flush with the cylinder profile, short design Internet: smt Electrical connection Cable length Part No. Type [m] PNP Cable, 3-wire SMT-8M-A-PS-24V-E-2,5-OE Plug M8x1, 3-pin SMT-8M-A-PS-24V-E-0,3-M8D PNP Plug M12x1, 3-pin SMT-8M-A-PS-24V-E-0,3-M12 Ordering data Proximity sensor for T-slot, magnetic reed Type of mounting Switching output N/O contact Insertable in the slot from above, flush with the cylinder profile Internet: sme Electrical connection Cable length Part No. Type [m] Contacting Cable, 3-wire SME-8M-DS-24V-K-2,5-OE SME-8M-DS-24V-K-5,0-OE Plug M8x1, 3-pin SME-8M-DS-24V-K-0,3-M8D Ordering data Connecting cables Internet: nebu Electrical connection, left Electrical connection, right Cable length Part No. Type [m] Straight socket, M8x1, 3-pin Cable, open end, 3-wire NEBU-M8G3-K-2.5-LE NEBU-M8G3-K-5-LE3 Straight socket, M12x1, 5-pin Cable, open end, 3-wire NEBU-M12G5-K-2.5-LE NEBU-M12G5-K-5-LE3 Angled socket, M8x1, 3-pin Cable, open end, 3-wire NEBU-M8W3-K-2.5-LE NEBU-M8W3-K-5-LE3 Angled socket, M12x1, 5-pin Cable, open end, 3-wire NEBU-M12W5-K-2.5-LE NEBU-M12W5-K-5-LE3 Ordering data Slot cover Assembly Length Part No. Type [m] Insertable from above 2 x ABP-5-S Ordering data One-way flow control valves Internet: grla-m5-qs Connection Material Part No. Type Thread For tubing O.D. M5 3 Metal design GRLA-M5-QS-3-D GRLA-M5-QS-4-D GRLA-M5-QS-6-D 10 Internet: Subject to change 2017/10
-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
Slide units SPZ, twin piston
Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits www.festo.com
-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
-H- Note. Angle grippers HGWC Key features. 2 Internet:
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
-U- Type discontinued. -H- Note. Available up until Angle grippers HGW Key features. 2 Internet:
Key features At a glance Double-acting piston drive Self-centring Variable gripping action: External/internal gripping Versatility thanks to externally adaptable gripper fingers Wide range of options for
Mini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
Semi-rotary drives DRQ
Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree
Twin cylinders DPZ/DPZJ
Key features High force with excellent protection against torsion 100 to 1,000 N thrust at 6 bar operating pressure Load capacity (F q ) from 8 to 105 N F q max. Permissible torque load (T L ) centrally
-U- Type discontinued
Key features At a glance -V- New Sturdier Optimised end stop system Optimised intermediate position module Minimised susceptibility to wear One-way flow control valves that can be externally adjusted Integrated
Parallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
Linear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
Compact cylinders ADN-S, AEN-S
Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece
Parallel grippers HGPC
Key features At a glance General The compact and low-cost parallel gripper consists of a two-part symmetrical housing. The piston moves traverse to the half-shell casing in an optimum housing design that
Mini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
Mini slides SLTE, electric
Key features Range of applications Special features The electric mini slide SLTE is ideal for use in automation applications where controlled end-position cushioning (gentle stopping), constant travel
Parallel grippers HGP, with protective dust cap
Key features At a glance Double-acting piston drive With protective dust cap for use in dusty environments (protection class IP54) Self-centring Variable gripping action: External/internal gripping High
Radial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
Radial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
Mini guided cylinders DFC
Product range and peripherals overview Function Version Type Piston Stroke [mm] [mm] Doubleacting DFC 4 5, 10, 15, 20 6 5, 10, 15, 20, 25, 0 10 5, 10, 15, 20, 25, 0 Piston 4 mm Piston 6, 10 mm Integrated
Long stroke grippers HGPL
Sturdy Gripping forces of up to 754 N Reliable Space saving 2004/10 Subject to change Products 2004/2005 1 / 3 Key features At a glance Space saving and suitable for high forces Two parallel and opposing
Linear drives DGC-HD, with heavy-duty guide
Linear drives DGC Key features At a glance New heavy-duty design for: Maximum loads and torques thanks to duo rail guide Long service life Ideal as a basic axis for linear gantries and cantilever axes
Linear drives SLM, with guided slide
Key features Version The linear drive SLM is a combination of a slide unit and a rodless linear drive. The drive moves the slide. The transmission of movement is accomplished via a magnetic coupling. The
Three-point grippers DHDS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws High gripping forces with compact dimensions Gripper jaw centring options
Standard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
Guided drives DGRF-C, Clean Design
Features and Product range overview At a glance The guided drive is used wherever hygiene, ease of cleaning and resistance are important, predominantly in dry and splash zones in the food and packaging
Linear drives SLG, flat design
Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design
Hinge cylinders DW Key features
Key features At a glance Hinge cylinder for clamping components during the welding process Easy assembly thanks to swivel bearing on the bearing cap Integrated flow control Integrated end-position cushioning
Semi-rotary drives DRVS
Key features Key features at a glance Double-acting semi-rotary drive with rotary vanes Lighter than other semi-rotary drives Modern and compact design Fixed swivel angle Swivel angle can be adjusted with
Parallel grippers DHPS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws Oval piston for high gripping forces High gripping forces with compact
Compact cylinders ADVUL
Piston rod secured against rotation by means of guide rods and yoke plate Profile slots for proximity sensors Extensive range of accessories 2016/03 Subject to change Internet: www.festo.com/catalog/...
-V- New. Linear drives DGC Features. 2 Internet:
Linear drives DGC Features At a glance Without external guide, for simple drive functions Compact fitting length relative to stroke Fully interchangeable with the linear drive DGP Easy assembly and installation
Linear drives DGPL Selection aid
Linear drives DGPL Linear drives DGPL Selection aid General Compact, fitting length relative to stroke Highly adaptable thanks to wide choice of mounting and attachment options Adjustable end-position
Guided drives DFM/DFM-B
Guided drives DFM/DFM-B q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Linear drives DGC-K. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Guided drives DFM/DFM-B
Guided drives DFM/DFM-B q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Flat cylinders EZH/DZF/DZH
Flat cylinders EZH/DZF/DZH Extremely flat design Protected against torsion thanks to special piston shape Compact assembly with block mounting Wide variety of mounting options 2017/10 Subject to change
Hinge cylinders DFAW
Key features At a glance Hinge cylinder for clamping components during the welding process Sintered bronze bushes as lowfriction bearing material on rod clevis and swivel bearing Clamping unit: With piston
Swivel/linear drive units DSL-B
Key features At a glance High repetition accuracy thanks to cushioning components with fixed stop Swivel angle can be infinitely and accurately set The mechanical gearing between the stop element and swivel
Swivel modules DSM/DSM-B
Swivel modules DSM/DSM-B Swivel modules DSM/DSM-B Key features At a glance Double-acting swivel module with rotary vanes The swivel angle is infinitely adjustable over the entire swivel range High precision
Multi-position cylinders/adapter kits
Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended
Stopper cylinders DFSP
Key features At a glance Versions: Trunnion Trunnion with female thread Roller Single-acting, pulling Double-acting with spring, pulling Double-acting without spring With or without protection against
Linear drive units DGO
Features General information Double-acting Magnetically coupled without mechanical connections Piston chamber and slide are pressure tight Pressure tight and leak-free system Dirt and dust cannot enter
Clamping-unit cylinders, standard port pattern
Key features At a glance Clamping units are generally used for the friction locking of longitudinally variable rods at any position. The attachment of a clamping unit to a pneumatic cylinder allows the
Linear actuators DFPI
Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator
Linear actuators DLP, Copac
Key features and type codes General -N- Diameter 80... 320 mm -T- Stroke length 40... 600 mm, additional stroke lengths upon request -O- Force 2800... 48000 N Festo Copac linear valve actuators are ideally
Mini slides EGSL, electric
Key features At a glance Electric slide series Maximum performance in compact space: Precision Load capacity Dynamic response Choice of homing: To fixed stop To reference switch Perfect for vertical applications
Stopper cylinders DFST
Key features At a glance Gentle stopping without impact vibration or noise Single-acting or double-acting Powerful shock absorber for high energy absorption Wide range of applications thanks to adjustable
Standard cylinders DNC-C180, to ISO 15552
Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and
Linear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
Linear drives DGPL Selection aid
Linear drives DGPL Linear drives DGPL Selection aid General Compact, fitting length relative to stroke Highly adaptable thanks to wide choice of mounting and attachment options Adjustable end-position
Standard cylinders DSBG, to ISO 15552
Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless
Cylinders DSBG to ISO 15552
Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless
Standard cylinders DNCB, ISO 15552
Standard cylinders DNCB, ISO 15552 Features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290)
Proximity sensors SMT/SME-10, for C-slot
Proximity sensors SMT/SME-10, for C-slot Proximity sensors SMT/SME Product range overview Design Type of mounting Measuring principle Type Operating voltage range For C-slot Standard Insertable in slot
Tandem/high-force cylinders
Tandem/high-force cylinders Tandem/high-force cylinders Product range overview Function Version Type Piston Stroke Position sensing Piston rod With male thread A Doubleacting Tandem cylinders DNCT 32,
Spindle axes DGE Key features
Spindle axes DGE Spindle axes DGE Key features At a glance Precision, rigid guide Highly adaptable, thanks to wide choice of mounting and attachment options Wide range of options for attaching drive units
Standard cylinders DDPC, with measured-value transducer DADE
Features Components for positioning and measuring using the standard cylinder DDPC Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX
Parallel grippers DHPS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws Oval piston for high gripping forces High gripping forces with compact
Proportional pressure regulators MPPES
Product range overview Function Type Circuit symbol Design Pneumatic connection 1 Proportional pressure regulators With proportional solenoid MPPES Directly actuated valve Nominal size pressurise/ exhaust
Linear drives DGC. Festo core product range Covers 80% of your automation tasks
Linear drives DGC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Compact Cylinders ADN Inch Series, Based on ISO Overview
Compact Cylinders ADN Inch Series, Based on ISO 2287 Overview Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation space
Pre-assembled plug connectors Product range overview
Pre-assembled plug s Product range overview Function Electrical connection Type Cable Version Page/Internet Round plug M8, 3-pin SEA-3GS-M8-S Pg7 Straight/ SEA-GS-M8 Pg7 Straight/ solder lug M12, -pin
Handling modules HSP
Handling modules HSP Handling modules HSP Key features at a glance Field of application Special features The handling module is a new generation of function modules for the automatic transfer, feed and
Mini slides DGSL. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Short-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
Compact cylinders CDC, ISO 21287, Clean Design
Key features Design Easy to clean Easy to assemble Versatile With the CDC (Clean Design Compact) cylinder series, the ADN modular system has been expanded to include an easy to clean compact cylinder variant
Standard Cylinders DNC Inch Series, to ISO 15552
Standard Cylinders DNC Inch Series, to ISO 5552 DNC Standard Cylinders meet ISO 5552 mounting, rod, bore and thread dimension specifications for easy interchangeability. Piston ¼ to 2½ Strokes of up to
Rotary indexing tables DHTG
Key features At a glance Sturdy mechanical system Easy planning and commissioning Indexing: 2, 3, 4, 6, 8, 12, 24 Integrated functions: Overload protection Sensor function Cushioning adjustment Speed setting
Mini slides DGSC Key features
Key features At a glance Properties Smallest guided slide unit (width 8 mm), therefore high component density possible Precision ball bearing cage guide permits accurate linearity/ parallelism Long service
Passive guide axes DGC-FA, without drive
Key features At a glance Driveless linear guide units with guide and freely movable slide The passive guide axis is designed to support force and torque capacity in multi-axis applications Higher torsional
FAST Program 2013 Festo Assured Shipping Time
FAST Program 203 Festo Assured Shipping Time TM A complete line of automation components available when you need them! FAST TM Program 203 Festo Assured Shipping Time A complete line of automation components
Cartridge cylinders EGZ
Peripherals overview and type codes 7 Installation without mounting attachments Minimal installation space required 4 3 2 1 Mounting attachments and accessories Description 1 Swivel mounting WBN 2 Flange
Guide axes ELFA, without drive
Guide axes ELFA, without drive Guide axes ELFA, without drive Key features At a glance Driveless linear guide units with guide and freely movable slide The guide axis is designed to support force and torque
Flow control valves GRO, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal Flow control function connection 2 connection 1 qnn 1) [l/min]
Twin-piston semi-rotary drives DRRD
Twin-piston semi-rotary drives DRRD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and
Twin-piston semi-rotary drives DRRD
Twin-piston semi-rotary drives DRRD Twin-piston semi-rotary drives DRRD Key features At a glance Rack and pinion principle Very high accuracy in the end positions Very high bearing load capacity Very good
Standard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
Standard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance Design Easy to clean Easy to mount Flexible DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1
Standard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NF E 49 003.1 and UNI 10290) The standard cylinder is used
Semi-rotary drives DSR/DSRL
Wide variety of mounting options Infinitely adjustable swivel angle Comprehensive range of accessories 2017/10 Subject to change Internet: www.festo.com/catalog/... 1 Features Brief description In these
Round Cylinders DSNU, Double-acting Inch Series
Round Cylinders DSNU, Double-acting Inch Series Piston 5/16 to 2-1/2 Stroke lengths up to 20 Double-acting Meets the highest requirements for running characteristics, service life and load carrying ability
Solenoid valves MHJ, fast-switching valves
Solenoid valves MHJ, fast-switching valves Solenoid valves MHJ, fast-switching valves Key features Innovative Versatile Reliable Easy to install Individual electrical connection via connecting cable and
Mounting kits SAMH-S
Key features and type codes Function Tamper-proof mounting of proximity sensors of the type SME-8M or SMT-8M-A. These mounting kits fulfil the applicable requirements of EN ISO 13849-2 for mechanical systems:
Standard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
Rotary/lifting modules EHMB, electric
Features At a glance The rotary/lifting module EHMB combines rotary and linear motion in one compact unit. The rotation is always transferred through a toothed belt to a hollow shaft by an electric motor
Pneumatic components for high-pressure applications
Pneumatic components for high-pressure applications Pneumatic components for high-pressure applications, series L Product range overview Function Version Type Size Pneumatic connection 1, 2 Page Direct
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Rotary/lifting modules EHMB, electric
Features At a glance The rotary/lifting module EHMB combines rotary and linear motion in one compact unit. The rotation is always transferred through a toothed belt to a hollow shaft by an electric motor
FAST TM Program Festo Assured Shipping Time
FAST TM Program Festo Assured Shipping Time A complete line of automation components available when you need them! Maximum productivity for you and your customers - this is our mission. We all face the
CPLab / CP Factory. Application module magazine. Data sheets
CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design
Pinch valves VZQA. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
Standard cylinders DNC-C180, to ISO 15552
-U- Type discontinued Available up until 2016 Standard cylinders DNC-C180, to ISO 15552 Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552
Compact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap
Planar surface gantries EXCH
Key features At a glance General Optimum dynamic response when compared with other Cartesian gantry systems The drive concept ensures low moving dead weight Flat system design Perfectly matched drive and
Linear drives DGPL, with external displacement encoder
Linear drives DGPL, with external displacement encoder Cylinders with displacement encoder Product range overview Function Type Description Drives Rodless DDLI Without guide With contactless measuring
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation
Check valves H/HA/HB/HGL
Check valves H/HA/HB/HGL q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Electric cylinders EPCO, with spindle drive
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Toothed belt axes EGC-HD-TB, with heavy-duty guide
Electromechanical drives Selection aid Overview of toothed belt and spindle axes Toothed belt axes Spindle axes Coordinate system Speeds of up to 10 m/s Acceleration of up to 0 m/s 2 Repetition accuracy