Compact cylinders ADVUL
|
|
- Primrose Bailey
- 6 years ago
- Views:
Transcription
1 Piston rod secured against rotation by means of guide rods and yoke plate Profile slots for proximity sensors Extensive range of accessories 2016/03 Subject to change Internet: 1
2 Peripherals overview ab ac 9 aa aj ADVUL- -S2 Mounting attachments and accessories 1 Flange mounting FUA 2 Swivel flange SUA for Clevis foot LBN 4 Swivel flange SUA for Clevis foot LN 6 Clevis foot LNG 7 Clevis foot LSN 8 Swivel flange SNCL 9 Adapter kit DPVU aj Slot cover ABP-5-S aa Proximity sensor SME/SMT-8 ab One-way flow control valve GRLA ac Push-in fitting QS Brief description ADVUL Page/Internet S2 For end caps 11 For end caps For end caps With spherical bearing For connecting two cylinders with identical piston diameter to form a multi-position cylinder To protect the sensor cable and keep dirt out of the sensor slots Can be integrated in the cylinder profile barrel To regulate speed For connecting compressed air tubing with standard external diameters qs 2 Internet: Subject to change 2016/03
3 Type codes ADVUL P A S2 Type Double-acting ADVUL Compact cylinder, secured against rotation by means of guide rods and yoke plate Piston Stroke Cushioning P Flexible cushioning rings/plates at both ends Position sensing A For proximity sensing Variant S2 Through piston rod S6 Heat-resistant seals up to 120 C 2016/03 Subject to change Internet: 3
4 Technical data Function Variants S2 -N- Diameter mm -T- Stroke length mm -W- S6 ADVUL- - -P-A Wearing parts kits, see 10 ADVUL- - -P-A-S2 General technical data Piston Pneumatic connection M5 M5 M5 M5 Gx Gx Gx Gx Gx G¼ Operating medium Compressed air in accordance with ISO :2010 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Constructional design Piston Piston rod Cylinder barrel Cushioning Flexible cushioning rings/plates at both ends Position sensing For proximity sensing Type of mounting Via through-holes With female thread Via accessories Mounting position Any Operating pressure [bar] Piston Piston rod at one end Through piston rod S Ambient conditions Compact cylinder Basic version S6 Ambient temperature 1) [ C] Corrosion resistance class CRC 2) 2 2 1) Note operating range of proximity sensors 2) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. 4 Internet: Subject to change 2016/03
5 Technical data Forces [N] and impact energy [J] Piston Theoretical force at 6 bar, advancing Theoretical force at 6 bar, retracting S S Max. impact energy at end positions Max. lateral force Fq as a function of projection x Piston rod at one end Through piston rod Fq [N] x mm 3 80 mm 4 63 mm 5 50 mm 6 40 mm 7 32 mm 8 25 mm 9 20 mm aj 16 mm aa 12 mm Torque M in relation to stroke length L mm 3 80 mm 4 63 mm 5 50 mm 6 40 mm 7 32 mm 8 25 mm 9 20 mm aj 16 mm aa 12 mm 2016/03 Subject to change Internet: 5
6 Technical data Materials Sectional view Compact cylinder Basic version S6 1 Cylinder barrel Wrought aluminium alloy Wrought aluminium alloy 2 Bearing and end cap Wrought aluminium alloy Wrought aluminium alloy 3 Piston rod High-alloy stainless steel High-alloy stainless steel High-alloy steel High-alloy steel 4 Flange screws High-alloy stainless steel High-alloy stainless steel Tempered steel Tempered steel Seals Polyurethane, nitrile rubber Fluorocaoutchouc Weights [g] Piston Product weight with 0mmstroke Additional weight per 10 mm stroke Moving load with 0 mm stroke Additional load per 10 mm stroke Internet: Subject to change 2016/03
7 Technical data Dimensions Basic cylinders Download CAD data 2 Minimum screw-in depth + = plus stroke length BG 1) D1 H9 D5 D6 D7 H9 E EE FB H M3 29 M M3 29 M M4 36 M M M M Gx M Gx M Gx M Gx M Gx M G¼ H L2 L3 L4 ME MM PL RT T1 T2 TG ß h M M M M M M M M M M ) Do not exceed screw-in depth 2016/03 Subject to change Internet: 7
8 Technical data Dimensions Variants Piston rod at one end Through piston rod Download CAD data AF KF T4 WH ZJ ZM 12 8 M M M M M M M M ) M ) M ) With a stroke 5 mm, the maximum screw-in depth is reduced by 5 mm 8 Internet: Subject to change 2016/03
9 Technical data Ordering data Basic version Type Stroke Part No. Type Stroke Part No. Type Piston 12 mm Piston 16 mm ADVUL-12-5-P-A ADVUL-16-5-P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A Piston 20 mm Piston 25 mm ADVUL-20-5-P-A ADVUL-25-5-P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A Piston 32 mm Piston 40 mm ADVUL-32-5-P-A ADVUL-40-5-P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A Piston 50 mm Piston 63 mm ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A Piston 80 mm Piston 100 mm ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A ADVUL P-A 2016/03 Subject to change Internet: 9
10 Technical data Ordering data Variants Type Piston Stroke Part No. Type Variable stroke ADVUL-12- -P-A ADVUL-16- -P-A ADVUL-20- -P-A ADVUL-25- -P-A ADVUL-32- -P-A ADVUL-40- -P-A ADVUL-50- -P-A ADVUL-63- -P-A ADVUL-80- -P-A ADVUL P-A S2 Through piston rod, variable stroke ADVUL-12- -P-A-S ADVUL-16- -P-A-S ADVUL-20- -P-A-S ADVUL-25- -P-A-S ADVUL-32- -P-A-S ADVUL-40- -P-A-S ADVUL-50- -P-A-S ADVUL-63- -P-A-S ADVUL-80- -P-A-S ADVUL P-A-S2 Ordering data Variants Type Piston Stroke Part No. Type S6 Heat-resistant up to 120 C, variable stroke ADVUL-12- -P-A-S ADVUL-16- -P-A-S ADVUL-20- -P-A-S ADVUL-25- -P-A-S ADVUL-32- -P-A-S ADVUL-40- -P-A-S ADVUL-50- -P-A-S ADVUL-63- -P-A-S ADVUL-80- -P-A-S ADVUL P-A-S6 Ordering data Wearing parts kits Part No. Type Part No. Type Piston Basic version S6 Heat-resistant up to 120 C ADVUL-12- -P-A 1) ADVUL-12- -P-A-S6 2) ADVUL-16- -P-A 1) ADVUL-16- -P-A-S6 2) ADVUL-20- -P-A 1) ADVUL-20- -P-A-S6 2) ADVUL-25- -P-A 1) ADVUL-25- -P-A-S6 2) ADVUL-32- -P-A 1) ADVUL-32- -P-A-S6 1) ADVUL-40- -P-A 1) ADVUL-40- -P-A-S6 1) ADVUL-50- -P-A 1) ADVUL-50- -P-A-S6 1) ADVUL-63- -P-A 1) ADVUL-63- -P-A-S6 1) ADVUL-80- -P-A 1) ADVUL-80- -P-A-S6 1) ADVUL P-A 1) ADVUL P-A-S6 1) 1) Assembly grease included in scope of delivery 2) Assembly grease not included in scope of delivery. If required, please order separately under part no (20 ml) 10 Internet: Subject to change 2016/03
11 Accessories Flange mounting FUA Material: Clear anodised aluminium + = plus stroke length Dimensions and ordering data For E FB MF R TF UF ZF CRC 1) Weight Part No. Type [g] 12/ FUA-12/ FUA FUA FUA FUA FUA FUA FUA FUA-100 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. 2016/03 Subject to change Internet: 11
12 Accessories Swivel flange SUA for piston mm Material: Anodised aluminium Free of copper and PTFE mm + = plus stroke length for piston mm Material: Anodised aluminium Free of copper and PTFE mm + = plus stroke length Dimensions and ordering data For CB CD EW FL L ML MR UB XC Weight Part No. Type [g] 12/ SUA-12/ SUA SUA SUA SUA SUA SUA SUA SUA-100 -H- Note The maximum stroke length may not be exceeded when combining cylinders and swivel flanges. For Max. stroke length For Max. stroke length Internet: Subject to change 2016/03
13 Accessories Adapter kit DPVU Material: Wrought aluminium alloy Free of copper and PTFE + = plus stroke length -H- Note The maximum overall stroke length may not be exceeded when combining cylinders and the multi-position adapter kit. Dimensions and ordering data For B1 H Max. CRC 1) Weight Part No. Type overall stroke length [g] 12/ DPVU-12/ DPVU DPVU DPVU DPVU DPVU DPVU DPVU DPVU-100 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Connecting two cylinders with identical piston diameter as a 3 or 4-position cylinder A 3 or 4-position cylinder consists of two separate cylinders whose piston rods advance in opposing directions. Depending upon actuation and stroke pattern, this type of cylinder can assume up to four positions. In each case the cylinder is driven precisely against a stop. If one end of the piston rod is fixed, the cylinder barrel executes the movement. The cylinder must be connected with flexible line connections. Implementing 3 positions Two cylinders with identical stroke length must be connected to this end. Implementing 4 positions Two cylinders with different stroke lengths must be connected to this end. 2016/03 Subject to change Internet: 13
14 Accessories Ordering data Mounting attachments Technical data Internet: mounting attachment Designation For Part No. Type Designation For Part No. Type Clevis foot LBN Clevis foot LNG LBN-12/ LNG LBN-12/ LNG LBN-20/ LNG LBN-20/ LNG LNG LNG-100 Clevis foot LN Clevis foot LSN LN LSN LN LSN LN LSN LN LSN LN LSN LN LSN-100 Swivel flange SNCL SNCL SNCL SNCL SNCL SNCL SNCL-100 Ordering data One-way flow control valves Technical data Internet: grla Connection Material Part No. Type Thread For tubing O.D. M5 3 Metal design GRLA-M5-QS-3-D GRLA-M5-QS-4-D GRLA-M5-QS-6-D Gx GRLA-x-QS-3-D GRLA-x-QS-4-D GRLA-x-QS-6-D GRLA-x-QS-8-D G¼ GRLA-¼-QS-6-D GRLA-¼-QS-8-D GRLA-¼-QS-10-D 14 Internet: Subject to change 2016/03
15 Accessories Ordering data Proximity sensors for T-slot, magneto-resistive Type of mounting Switch output Technical data Internet: smt Electrical connection Cable length Part No. Type [m] N/O contact Insertable in the slot from above, flush with cylinder profile, short design PNP Cable, 3-wire SMT-8M-A-PS-24V-E-2,5-OE Plug M8x1, 3-pin SMT-8M-A-PS-24V-E-0,3-M8D Plug M12x1, 3-pin SMT-8M-A-PS-24V-E-0,3-M12 NPN Cable, 3-wire SMT-8M-A-NS-24V-E-2,5-OE Plug M8x1, 3-pin SMT-8M-A-NS-24V-E-0,3-M8D N/C contact Insertable in the slot from above, flush with cylinder profile, short design PNP Cable, 3-wire SMT-8M-A-PO-24V-E-7,5-OE Ordering data Proximity sensors for T-slot, magnetic reed Type of mounting Switch output Technical data Internet: sme Electrical connection Cable length Part No. Type [m] N/O contact Insertable in the slot from above, flush with cylinder profile Insertable in the slot lengthwise, flush with the cylinder profile Contacting Cable, 3-wire SME-8M-DS-24V-K-2,5-OE SME-8M-DS-24V-K-5,0-OE Cable, 2-wire SME-8M-ZS-24V-K-2,5-OE Plug M8x1, 3-pin SME-8M-DS-24V-K-0,3-M8D Contacting Cable, 3-wire SME-8-K-LED-24 Plug M8x1, 3-pin SME-8-S-LED-24 N/C contact Insertable in the slot lengthwise, flush with the cylinder profile Contacting Cable, 3-wire SME-8-O-K-LED-24 Ordering data Connecting cables Technical data Internet: nebu Electrical connection, left Electrical connection, right Cable length Part No. Type [m] Straight socket, M8x1, 3-pin Cable, open end, 3-wire NEBU-M8G3-K-2.5-LE NEBU-M8G3-K-5-LE3 Straight socket, M12x1, 5-pin Cable, open end, 3-wire NEBU-M12G5-K-2.5-LE NEBU-M12G5-K-5-LE3 Angled socket, M8x1, 3-pin Cable, open end, 3-wire NEBU-M8W3-K-2.5-LE NEBU-M8W3-K-5-LE3 Angled socket, M12x1, 5-pin Cable, open end, 3-wire NEBU-M12W5-K-2.5-LE NEBU-M12W5-K-5-LE3 Ordering data Slot cover for T-slot Mounting Length Part No. Type Insertable from above 2x 0.5 m ABP-5-S 2016/03 Subject to change Internet: 15
16 Festo North America 1 Festo Canada 2 Montréal 3 Québec City Headquarters Festo Inc Explorer Drive ississauga, O LW , Trans-Canada Pointe-Claire, QC , rue Watt11 Québec, QC Festo United States 5 Appleton 7 etroit Headquarters Festo Corporation 395 Moreland Road orth 9 Tower iew Drive, Suite Greenville, WI 59 auppauge, 11 6 Chicago 8 5 W Algonquin - Suite 30 Arlington eights, IL West Long Lake Road Troy, MI 09 Silicon Valley 935 Southfront Road, Suite F Livermore, CA 9550 Festo Regional Contact Center Canadian Customers Commercial Support: Tel: 1 O FESTO Fax: 1 F FESTO festocanadacafestocom USA Customers Commercial Support: Tel: FESTO Fax: FESTO customerserviceusfestocom Technical Support: Tel:1 O FESTO Fax:1 F FESTO technicalsupportcafestocom Technical Support: Tel:1 O FESTO Fax:100 9 FESTO productsupportusfestocom C Subect to change Internet:
Twin cylinders DPZ/DPZJ
Key features High force with excellent protection against torsion 100 to 1,000 N thrust at 6 bar operating pressure Load capacity (F q ) from 8 to 105 N F q max. Permissible torque load (T L ) centrally
More informationMini guided cylinders DFC
Product range and peripherals overview Function Version Type Piston Stroke [mm] [mm] Doubleacting DFC 4 5, 10, 15, 20 6 5, 10, 15, 20, 25, 0 10 5, 10, 15, 20, 25, 0 Piston 4 mm Piston 6, 10 mm Integrated
More informationLinear drives SLM, with guided slide
Key features Version The linear drive SLM is a combination of a slide unit and a rodless linear drive. The drive moves the slide. The transmission of movement is accomplished via a magnetic coupling. The
More information-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
More informationSwivel/linear drive units DSL-B
Key features At a glance High repetition accuracy thanks to cushioning components with fixed stop Swivel angle can be infinitely and accurately set The mechanical gearing between the stop element and swivel
More informationStopper cylinders DFSP
Key features At a glance Versions: Trunnion Trunnion with female thread Roller Single-acting, pulling Double-acting with spring, pulling Double-acting without spring With or without protection against
More informationParallel grippers HGP, with protective dust cap
Key features At a glance Double-acting piston drive With protective dust cap for use in dusty environments (protection class IP54) Self-centring Variable gripping action: External/internal gripping High
More informationRound Cylinders DSNU, Double-acting Inch Series
Round Cylinders DSNU, Double-acting Inch Series Piston 5/16 to 2-1/2 Stroke lengths up to 20 Double-acting Meets the highest requirements for running characteristics, service life and load carrying ability
More informationStopper cylinders DFST
Key features At a glance Gentle stopping without impact vibration or noise Single-acting or double-acting Powerful shock absorber for high energy absorption Wide range of applications thanks to adjustable
More informationSlide units SPZ, twin piston
Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits www.festo.com
More informationStandard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
More informationLinear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
More informationSemi-rotary drives DSR/DSRL
Wide variety of mounting options Infinitely adjustable swivel angle Comprehensive range of accessories 2017/10 Subject to change Internet: www.festo.com/catalog/... 1 Features Brief description In these
More informationReverse jet pulse valves VZWE, solenoid actuated
Key features and product range overview Function Reverse jet pulse valves VZWE are piloted 2/2-way valves. They generate pulses of compressed air using a suitable solenoid coil for mechanically cleaning
More informationHandling modules HSP
Handling modules HSP Handling modules HSP Key features at a glance Field of application Special features The handling module is a new generation of function modules for the automatic transfer, feed and
More informationFlat cylinders EZH/DZF/DZH
Flat cylinders EZH/DZF/DZH Extremely flat design Protected against torsion thanks to special piston shape Compact assembly with block mounting Wide variety of mounting options 2017/10 Subject to change
More informationRotary indexing tables DHTG
Key features At a glance Sturdy mechanical system Easy planning and commissioning Indexing: 2, 3, 4, 6, 8, 12, 24 Integrated functions: Overload protection Sensor function Cushioning adjustment Speed setting
More informationMini slides DGSC Key features
Key features At a glance Properties Smallest guided slide unit (width 8 mm), therefore high component density possible Precision ball bearing cage guide permits accurate linearity/ parallelism Long service
More informationOne-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
More informationParallel grippers HGPC
Key features At a glance General The compact and low-cost parallel gripper consists of a two-part symmetrical housing. The piston moves traverse to the half-shell casing in an optimum housing design that
More informationMulti-position cylinders/adapter kits
Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended
More informationShort-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationLinear drives DGPL Selection aid
Linear drives DGPL Linear drives DGPL Selection aid General Compact, fitting length relative to stroke Highly adaptable thanks to wide choice of mounting and attachment options Adjustable end-position
More informationSemi-rotary drives DRQ
Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree
More informationStandard cylinders DNC-C180, to ISO 15552
-U- Type discontinued Available up until 2016 Standard cylinders DNC-C180, to ISO 15552 Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552
More informationTandem/high-force cylinders
Tandem/high-force cylinders Tandem/high-force cylinders Product range overview Function Version Type Piston Stroke Position sensing Piston rod With male thread A Doubleacting Tandem cylinders DNCT 32,
More informationStandard cylinders DNCB, ISO 15552
Standard cylinders DNCB, ISO 15552 Features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290)
More informationClamping-unit cylinders, standard port pattern
Key features At a glance Clamping units are generally used for the friction locking of longitudinally variable rods at any position. The attachment of a clamping unit to a pneumatic cylinder allows the
More informationFeed separators HPVS
Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top
More informationSilencers. Festo core product range Covers 80% of your automation tasks
Silencers q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationPiston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationCompact cylinders ADN-S, AEN-S
Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece
More informationPositioners CMSX. Festo core product range Covers 80% of your automation tasks
Positioners CMSX q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More information-Q- Temperature range C. -L- Operating pressure bar CRVZS-5/10/20 with condensate drain. Air reservoirs CRVZS Technical data
Air reservoirs Air reservoirs CRVZS Function CRVZS-0.1/0.4/0.75/2 -Q- Temperature range 10 +100 C -L- Operating pressure 0.95 16 bar CRVZS-5/10/20 with condensate drain The reservoirs can be used to compensate
More informationRound Cylinders ESNU, Single-acting Inch Series
Round Cylinders ESNU, Single-acting Inch Series Piston 5/16Ė to 2-1/2Ė Stroke lengths up to 2Ė Single-acting, spring return Meets the highest requirements for running characteristics, service life and
More informationSolenoid valves VOVG Product range overview
Valve series VOVG Product range overview Function Symbol Version Normally Voltage [V DC] Page/ open closed 5 12 2 Internet /2-way valve In-line valve 8/vovg Semi in-line valve Sub-base valve 5/2-way valve
More information-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
More informationCylinders DSBG to ISO 15552
Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless
More informationPre-assembled plug connectors Product range overview
Pre-assembled plug connectors Product range overview Function Electrical connection Type Cable connector Version Page/Internet Round plug connector Plug M8, 3-pin SEA-3GS-M8-S Pg7 Straight/ SEA-GS-M8 Pg7
More informationProportional directional control valves MPYE
Key features General information The directly actuated proportional directional control valve has a position-controlled spool. This transforms an analogue input signal into a corresponding opening cross-section
More informationQuarter turn actuators DFPD
Quarter turn actuators DFPD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationHinge cylinders DW Key features
Key features At a glance Hinge cylinder for clamping components during the welding process Easy assembly thanks to swivel bearing on the bearing cap Integrated flow control Integrated end-position cushioning
More informationAngle seat valve VZXF, NPT
Angle seat valve VZXF, NPT -V- New Angle seat valve VZXF, NPT Key features Function Angle seat valves are externally actuated valves. These valves are actuated by a direct supply of compressed air. In
More informationStandard cylinders DNC-C180, to ISO 15552
Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and
More informationStandard cylinders DSBG, to ISO 15552
Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless
More informationPressure and vacuum switches PEV/VPEV
Pressure and vacuum switches PEV/VPEV Pressure and vacuum switches PEV/VPEV Product range overview Function Design Type Operating pressure Pneumatic connection Mechanical pressure switches Electrical connection
More informationFlat Cylinders DZF - Inch Series Overview
Flat Cylinders DZF - Inch Series Overview Non-rotating oval piston Piston 1/2 to 2-1/2 Standard strokes up to 12, variable strokes up to 13 Double-acting Moment capacity up to 13.3 lbf-in Male or female
More information-H- Note. Pinch valves VZQA Features
Features Application Design Areas of application The valve can be used to control liquid and dusty media, solids and material mixtures Easy-to-clean housing (clean design) Open or closed in normal position
More informationParallel grippers DHPS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws Oval piston for high gripping forces High gripping forces with compact
More informationParallel grippers HGPP, precision
Key features 1 3 4 At a glance Wide range of variants for greater flexibility: Double-acting piston drive HGPP-...-A. Compression springs for supporting or retaining gripper forces, or for use as a singleacting
More informationGuide units FEN/FENG for ISO cylinders
Key features At a glance The guide units FEN and FENG protect ISO cylinders against torsion when these are subjected to high torque loads. They offer high precision guidance for workpiece handling and
More informationCantilever axes DGEA, with toothed belt drive
Features Key features at a glance Super flat Ω drive head enabling high mechanical torques. High-quality guide as for DGE-KF/ DGP-KF axis. Improved dynamics compared to toothed belt axis DGE-ZR in cantilever
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
More informationMini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
More informationQuick exhaust valves VBQF
Product range overview and type codes Function Higher piston speeds can be achieved on the return stroke of single and double-acting drives with the quick exhaust valves VBQF. Compressed air flows from
More informationCompact Cylinders ADN Inch Series, Based on ISO Overview
Compact Cylinders ADN Inch Series, Based on ISO 2287 Overview Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation space
More informationSolenoid valves VZWF, force pilot operated
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationCompact cylinders CDC, ISO 21287, Clean Design
Key features Design Easy to clean Easy to assemble Versatile With the CDC (Clean Design Compact) cylinder series, the ADN modular system has been expanded to include an easy to clean compact cylinder variant
More informationToothed belt axes ELGG
Key features At a glance Toothed belt axis with two opposing slides Optimum price/performance ratio Ready-to-install unit for quick and easy design High reliability thanks to a tested service life of 2500
More informationLinear drive units DGO
Features General information Double-acting Magnetically coupled without mechanical connections Piston chamber and slide are pressure tight Pressure tight and leak-free system Dirt and dust cannot enter
More informationCompact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation
More information-U- Type discontinued
Key features At a glance -V- New Sturdier Optimised end stop system Optimised intermediate position module Minimised susceptibility to wear One-way flow control valves that can be externally adjusted Integrated
More informationStandard Cylinders DNC Inch Series, to ISO 15552
Standard Cylinders DNC Inch Series, to ISO 5552 DNC Standard Cylinders meet ISO 5552 mounting, rod, bore and thread dimension specifications for easy interchangeability. Piston ¼ to 2½ Strokes of up to
More informationShort-stroke cylinders ADNE-LAS, with linear motor
Key features At a glance Properties Electric short-stroke cylinder with integrated linear motor, specifically designed for dynamic movements between two end positions A cycle of advancing and retracing
More informationParallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
More informationSuction cup holders ESH
Suction cup holders ESH Suction cup holders ESH Type codes ESH HCL 4 QS Type ESH Suction cup holder Suction cup holder HA HB HC HCL HD HDL HE HF Vacuum port on top, mounting via lock nut, without height
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationUniversal plug connectors, for self-assembly
Universal plug connectors, for self-assembly Universal plug connectors, for self-assembly Product range overview Function Version Type Connection technology Connection cross section Degree of [mm 2 ] protection
More information-V- New. Linear drives DGC Features. 2 Internet:
Linear drives DGC Features At a glance Without external guide, for simple drive functions Compact fitting length relative to stroke Fully interchangeable with the linear drive DGP Easy assembly and installation
More informationSemi-rotary actuators DSR/DSRL - Inch Series
Semi-rotary actuators DSR/DSRL - Inch Series Wide variety of mounting options Infinitely adjustable rotation angle DSR Comprehensive range of accessories DSRL Product range overview Function Version Double-acting
More informationSemi-rotary drives DRVS
Key features Key features at a glance Double-acting semi-rotary drive with rotary vanes Lighter than other semi-rotary drives Modern and compact design Fixed swivel angle Swivel angle can be adjusted with
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGW Key features. 2 Internet:
Key features At a glance Double-acting piston drive Self-centring Variable gripping action: External/internal gripping Versatility thanks to externally adaptable gripper fingers Wide range of options for
More informationPressure regulators MS-LR, MS series, NPT
Pressure regulators MS-LR, MS series, NPT Peripherals overview Pressure regulator MS9-LR 4 5 -H- Note 3 1 Additional accessories: Module connector for combinations with size MS6, MS9 or MS12 Internet:
More informationFAST Program 2013 Festo Assured Shipping Time
FAST Program 203 Festo Assured Shipping Time TM A complete line of automation components available when you need them! FAST TM Program 203 Festo Assured Shipping Time A complete line of automation components
More information-H- Note. Protective conduits Technical data. Protective conduit MKV. Materials: PVC, spring steel
Technical data Protective conduit MKV Materials: PVC, spring steel Note on materials: RoHS-compliant 1 Protective conduit MKV 2 Protective conduit fitting MKVV 3 Lock nut MKVM For protecting pneumatic
More informationMini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
More informationStandard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
More informationRound cylinders DSEU/ESEU
Features DSEU-50/63 DSEU-8 40 DSEU- -MQ DSEU- -MA Brief description Compact design Greater flexibility thanks to various end caps Practical mounting options With flexible cushioning rings in the end-positions
More informationLinear drives DGPL Selection aid
Linear drives DGPL Linear drives DGPL Selection aid General Compact, fitting length relative to stroke Highly adaptable thanks to wide choice of mounting and attachment options Adjustable end-position
More informationFittings NPCK Key features
Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
More informationHinge cylinders DFAW
Key features At a glance Hinge cylinder for clamping components during the welding process Sintered bronze bushes as lowfriction bearing material on rod clevis and swivel bearing Clamping unit: With piston
More informationLinear drives DGC-K. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationStandard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
More informationStandard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance Design Easy to clean Easy to mount Flexible DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1
More informationPressure sensors SPAU
Key features At a glance Product description The pressure sensor SPAU is suitable for monitoring compressed air and noncorrosive gases. The variant with display offers the option of reading the pressure
More information-H- Note. Sub-bases VABP Key features
Key features At a glance The sub-base VABP can be used to help realise specific switch-off behaviour when switching off the valve load voltage. It is a single-channel solution for uncoupling the drive
More informationThree-dimensional gantries
Key features At a glance A three-dimensional gantry (YXCR) is an assembly of several axis modules (EHM /DHMZ) to produce a movement in 3D space. Can be used universally for handling light to very heavy
More informationLinear actuators DLP, Copac
Key features and type codes General -N- Diameter 80... 320 mm -T- Stroke length 40... 600 mm, additional stroke lengths upon request -O- Force 2800... 48000 N Festo Copac linear valve actuators are ideally
More informationMini slides SLTE, electric
Key features Range of applications Special features The electric mini slide SLTE is ideal for use in automation applications where controlled end-position cushioning (gentle stopping), constant travel
More informationRound cylinders DSNU/ESNU
Round cylinders DSNU/ESNU Reacts quickly thanks to minimal break-away force Meets the highest requirements for running characteristics, service life and load carrying ability Extensive range of accessories
More informationFlat Cylinders DZH - Inch Series Overview
Flat Cylinders DZH - Inch Series Overview Non-rotating oval piston Piston 5/8 to 2-1/2 Strokes up to 40 Double-acting Moment capacity up to 2.2 lbf-in Extensive range of accessories Versatile mounting
More informationLinear drives DGC-HD, with heavy-duty guide
Linear drives DGC Key features At a glance New heavy-duty design for: Maximum loads and torques thanks to duo rail guide Long service life Ideal as a basic axis for linear gantries and cantilever axes
More informationLubricators MS-LOE, MS series, NPT
Lubricators MS-LOE, MS series, NPT Peripherals overview 5 3 4 1 -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or MS12 Internet: rmv, armv 2 1 2/3/4/5 2/3/4/5 Mounting
More information-H- Note. Angle grippers HGWC Key features. 2 Internet:
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationStandard cylinders DNCB, ISO 15552
-U- Type discontinued Available up until 2012 Standard cylinders DNCB, ISO 15552 Features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431,
More information-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...
More informationFAST TM Program Festo Assured Shipping Time
FAST TM Program Festo Assured Shipping Time A complete line of automation components available when you need them! Maximum productivity for you and your customers - this is our mission. We all face the
More informationLinear actuators DFPI
Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator
More informationCompact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap
More information