Piston rod attachments

Transcription

1 Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch from the Festo factory in 24 hours Held in stock in 13 service centres worldwide More than 2200 products wready for dispatch in 5 days maximum from stock Assembled for you in 4 service centres worldwide Up to 6 x variants per product series Look for the star! 2017/11 Subject to change Internet: 1

2 Piston rod attachments Peripherals overview Mounting attachments and accessories Description 1 Rod eye SGS Rod eye CRSGS 2 Rod clevis SGA 3 Rod clevis SG Rod clevis CRSG 4 Self-aligning rod coupler FK 5 Self-aligning rod coupler CRFK 6 Coupling piece KSG Coupling piece KSZ 7 Hex nut MSK 8 Adapter AD Rod eyes are maintenance-free due to the combination of steel and PTFE-bronze material in the swivel bearing. Corresponds to ISO dimensional series K. Corrosion and acid-resistant design. Corresponds to ISO dimensional series K. Rod clevises are used in combination with the rod eye SGS for spherical connection of cylinders. This rod clevis is fitted to the threaded end of the piston rod and permits a swivelling movement of the cylinder in one plane. Corresponds to ISO 8140 or DIN Corrosion and acid-resistant design. Corresponds to ISO 8140 or DIN Rod couplers link the piston rod end of all cylinder types to the machine parts to be moved. This compensates for radial and angular deviations (misalignment). Corrosion and acid-resistant design. Coupling pieces link the piston rod end of all cylinder types to the machine parts to be moved. They compensate radial misalignments up to ±1 mm. For cylinders with non-rotating piston rods. With this coupling piece, a cylinder can be connected with positional stability to the component being moved in order to compensate for radial deviation. Based on and/or corresponds to ISO Specially for through, hollow piston rods, e.g. for connecting vacuum generators. 2 Internet: Subject to change 2017/11

3 Piston rod attachments Product range overview Piston rod attachments Piston rod thread Rod eye Rod clevis Male Female SGS- CRSGS- SGA- 1) SG- CRSG- M4 M6 M8 M10 M10x1.25 x1.25 x1.5 M20x1.5 M27x2 M36x2 M42x2 M48x2 Page/Internet ) Only to be attached to the piston rod in conjunction with the rod eye SGS. Piston rod attachments Piston rod thread Self-aligning rod coupler Coupling piece Hex nut Adapter Male Female FK- CRFK- KSG- KSZ- MSK- AD- M4 M6 M8 M10 M10x1.25 x1.25 x1.5 M20x1.5 M27x2 M36x2 M42x2 M48x2 M4 M5 M6 M8 M10 Page/Internet /11 Subject to change Internet: 3

4 Rod eyes SGS Rod eye SGS 1 rod eye, 1 hex nut to DIN 439 KK AV B1 CE CN D1 EF EN EU H7 ±0.5 M M M M10 M10x x x M20x M27x M36x M42x M48x KK Z ß1 ß2 ISO CRC 1) Weight Part No. Type dimensional [ ] series K [g] M SGS-M4 M q9254 SGS-M6 M q9255 SGS-M8 M SGS-M M10x q9261 SGS-M10x1, SGS x q9262 SGS-x1, SGS x q9263 SGS-x1,5 M20x q9264 SGS-M20x1,5 M27x SGS-M27x2 M36x SGS-M36x2 M42x SGS-M42x2 M48x SGS-M48x2 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 4 Internet: Subject to change 2017/11

5 Rod eyes CRSGS, stainless steel Rod eye CRSGS 1 rod eye, 1 hex nut to DIN 439 High-alloy steel KK AV B1 CE CN D1 EF EN EU 2 H7 ±0.5 M M M10x x x M20x M27x KK Z ß1 ß2 ISO CRC 1) Weight Part No. Type dimensional [ ] series K [g] M CRSGS-M6 M CRSGS-M8 M10x CRSGS-M10x1,25 x CRSGS-x1,25 x CRSGS-x1,5 M20x CRSGS-M20x1,5 M27x CRSGS-M27x2 1) Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. 2017/11 Subject to change Internet: 5

6 Rod clevises SGA Rod clevis SGA 1 rod clevis, 1 pivot pin and 1 retaining clip The rod clevis SGA 1 is used in combination with the rod eye SGS 2 ( page 4) for spherical mounting of cylinders. KK B1 B2 B3 CE CK CM CV D1 d12 F7/h9 B12 M10x x x M20x M27x M36x KK L2 L3 L4 LE T1 CRC 1) Weight Part No. Type [g] M10x SGA-M10x1, SGA x SGA-x1, SGA x SGA-x1,5 M20x SGA-M20x1,5 M27x SGA-M27x2 M36x SGA-M36x2 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). 6 Internet: Subject to change 2017/11

7 Rod clevises SG Rod clevis SG 1 rod clevis, 1 hinged spring pin, 1 hex nut (M4: DIN 934, M6 : DIN 439) KK B1 B2 B3 CE CK CM CV D1 M ±0.3 4h11 4B M ±0.3 6h11 6B M ±0.4 8h11 8B M10 M10x ±0.4 10h11 10B x ±0.4 12h / x ±0.4 16h / KK LE ß1 ISO 8140 DIN CRC 1) Weight Part No. Type ±0.5 [g] M SG-M4 M q3110 SG-M6 M q3111 SG-M8 M SG-M10 20 M10x q6144 SG-M10x1, SG- 24 x q6145 SG-x1, SG x q6146 SG-x1,5 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/11 Subject to change Internet: 7

8 Rod clevises SG Rod clevis SG 1 rod clevis, 1 bolt, 1 retaining ring 1 hex nut (DIN 439) KK B1 B2 B3 CE CK CM CV D1 M20x ±0.4 20e / M27x ±0.4 30e / M36x ±0.4 35e / M42x ±0.4 40e / M48x ±0.4 50e / KK LE ß1 ISO 8140 CRC 1) Weight Part No. Type ±0.5 [g] M20x q6147 SG-M20x1,5 M27x SG-M27x2-B M36x SG-M36x2 M42x SG-M42x2 M48x SG-M48x2 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 8 Internet: Subject to change 2017/11

9 Rod clevises CRSG, stainless steel Rod clevis CRSG 1 rod clevis, 1 pivot pin, 1 hex nut to DIN 439 High-alloy steel KK B1 B2 B3 CE CK CM CV D1 h11 H9/e8 ±0.3 M ± B M ± B M10x ± B x ± / x ± / M20x ± / M27x ± / KK LE ß1 ISO 8140 DIN CRC 1) Weight Part No. Type ±0.5 [g] M CRSG-M6 M CRSG-M8 M10x CRSG-M10x1,25 x CRSG-x1,25 x CRSG-x1,5 M20x CRSG-M20x1,5 M27x CRSG-M27x2 1) Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. 2017/11 Subject to change Internet: 9

10 Self-aligning rod couplers FK Self-aligning rod coupler FK 1 self-aligning rod coupler, 1 hex nut to DIN 439 Angular compensation Radial compensation of central axis KK B1 D1 D2 D3 L1 L2 L3 L4 L5 L6 W1 ß1 ß2 M M M M M M10x x x M20x M27x M36x [ ] KK ß3 ß4 Tensile and compressive load max. Axial play Radial deviation P CRC 1) Weight Part No. Type [N] [mm] [mm] [g] M ± FK-M4 M ± FK-M5 M ± q2061 FK-M6 M ± q2062 FK-M8 M ± FK-M M10x ± q6140 FK-M10x1, ± FK x ± q6141 FK-x1, ± FK x ± q6142 FK-x1,5 M20x ± q6143 FK-M20x1,5 M27x ± FK-M27x2 M36x ± FK-M36x2 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 10 Internet: Subject to change 2017/11

11 Self-aligning rod couplers CRFK, stainless steel Self-aligning rod coupler CRFK 1 self-aligning rod coupler Housing, nut, threaded pin: High-alloy stainless steel Cap: Elastomer Angular compensation Radial compensation of central axis KK D1 D2 D3 L1 L2 L3 L4 W1 ß1 ß2 M10x x x M20x [ ] KK Tensile and compressive load max. [N] Axial play [mm] Radial deviation P [mm] Ambient temperature [ C] M10x ± x ± x ± M20x ± KK CRC 1) Weight Part No. Type [g] M10x CRFK-M10x1,25 x CRFK-x1,25 x CRFK-x1,5 M20x CRFK-M20x1,5 1) Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. 2017/11 Subject to change Internet: 11

12 Coupling pieces KSG Coupling piece KSG These coupling pieces connect the piston rod thread of all types of cylinders to machine components which need to be driven. The pieces can compensate for radial alignment deviations of up to 1 mm. 1 flange plate, 1 threaded coupling KK B1 B2 B3 B4 B5 Max. radial backlash D1 D2 D3 D4 H H13 H13 M10x x x M20x M27x H1 KK H2 T1 Min. axial backlash T2 ß1 Max. tigthening torque 1) CRC 2) Weight Part No. Type [Nm] M10x KSG-M10x1,25 x KSG-x1,25 x KSG-x1,5 M20x KSG-M20x1,5 M27x KSG-M27x2 [g] 1) For mounting screws with standard threads and strength class 8.8 2) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). 12 Internet: Subject to change 2017/11

13 Coupling pieces KSZ Coupling piece KSZ for non-rotating piston rods with male threads These coupling pieces can be used to connect a cylinder with a non-rotating piston rod to another component with a defined orientation without rotating either the cylinder or other component. 1 flange plate, 1 threaded coupling KK B1 B2 B3 B4 D1 D2 D3 H13 D4 H1 H2 T1 T2 M M M10x x x M20x min. KK ß Max. tightening torque 1) Max. tightening torque 2) Max. tightening CRC 4) Weight Part No. Type torque 3) [Nm] [Nm] [Nm] [g] M KSZ-M6 M KSZ-M8 M10x KSZ-M10x1,25 x KSZ-x1,25 x KSZ-x1,5 M20x KSZ-M20x1,5 1) For mounting screws with standard threads and strength class 8.8 2) For use with lock nut on piston rod 3) Torque which coupling can transmit with coefficient of fricton μ 0,1 and 10x safety margin at max. permissible tightening torque 4) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). -H- Note The torque on the coupling piece must not exceed the permissible torque on the cylinder. The mounting screws should be tightened evenly. 2017/11 Subject to change Internet: 13

14 Hex nuts MSK Hex nut MSK D1 B1 ß1 Conforms to ISO 8675 Based on ISO 8675 CRC 1) Weight Part No. Type PU 2) [g] M10x MSK-M10x1,25 10 x MSK-x1,25 x MSK-x1,5 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. 2) Packaging unit quantity 14 Internet: Subject to change 2017/11

15 Adapter AD Adapter AD Anodised aluminium 1 E.g. hollow piston rod 2 Vacuum generator K1 D3 D4 L11 ß1 Weight Part No. Type M6 M AD-M6-M5 M6 G1/ AD-M6-1/8 M6 G1/ AD-M6-1/4 M8 G1/ AD-M8-1/8 M8 G1/ AD-M8-1/4 M10x1.25 G1/ AD-M10x1,25-1/8 M10x1.25 G1/ AD-M10x1,25-1/4 x1.25 G1/ AD-x1,25-1/4 x1.25 G3/ AD-x1,25-3/8 [g] 2017/11 Subject to change Internet: 15