Standards-based cylinders DSBC, to ISO 15552

Size: px
Start display at page:

Download "Standards-based cylinders DSBC, to ISO 15552"

Transcription

1 q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch from the Festo factory in 24 hours Held in stock in 13 service centres worldwide More than 2200 products wready for dispatch in 5 days maximum from stock Assembled for you in 4 service centres worldwide Up to 6 x variants per product series Look for the star!

2 Key features At a glance DIN Standards-based cylinders to ISO (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE and UNI 10290) Double-acting For contactless position sensing Available with protection against rotation EX4: for use in potentially explosive areas Extensive range of accessories makes it possible to install the cylinder virtually anywhere Three types of cushioning available: P cushioning: elastic cushioning rings/pads at both ends PPS cushioning: pneumatic cushioning, self-adjusting at both ends PPV cushioning: pneumatic cushioning, adjustable at both ends The variants can be configured according to individual needs using a modular product system High flexibility thanks to the wide range of variants DSBC- -C With clamping unit, standard hole pattern Standard hole pattern Holding or clamping the piston rod in any position Piston rod can be held in position for long periods even with alternating loads, fluctuating operating pressure or leaks in the system Additional measures are required for use in safety-related applications; in Europe, for example, the standards listed under the EC Machinery Directive must be observed. Without additional measures in accordance with statutory minimum requirements, the product is not suitable for use in safety-related sections of control systems. DSBC- -E1/-E2/-E3 With end-position locking, standard hole pattern Standard hole pattern Positive locking in the end position as a drop guard. In the event of a pressure drop, the piston rod is locked in its end position Either at one or both ends Additional measures are required for use in safety-related applications; in Europe, for example, the standards listed under the EC Machinery Directive must be observed. Without additional measures in accordance with statutory minimum requirements, the product is not suitable for use in safety-related sections of control systems. DSBC- -P2 With bellows kit DADB, standard hole pattern 1 The bellows protects the piston rod, the seal and the bearing from the effects of a wide range of media, which has a positive impact on the service life of these components. The bellows kit is a leak-free system. To prevent unwanted media from being drawn in, the supply and exhaust air must be ducted via a pressure compensation hole in the connection part 1. The kit protects the piston rod, seal and bearings against a wide variety of media, for example: Dust Chippings Oil Grease Fuel Ordering the bellows kit An extended piston rod is absolutely essential if a bellows kit is to be used. The bellows kit can be ordered via the modular product system or as an accessory. The following must be noted in this case: Ordering via the modular product system: The bellows kit is supplied mounted on the bearing cap using feature P2. The required piston rod extension is automatically taken into consideration. This means that there is no need to specify a value for feature E. Ordering as an accessory: If the bellows kit is ordered as an accessory, the required value page 53 must be entered for feature E in the modular product system. 2 Internet: Subject to change 2017/11

3 Key features DSBC- D3 Sensor slots on 3 sides The piston position can be sensed on three sides of the drive if feature D3 is selected in the modular product system. 3 Slot for proximity sensor Position sensing/force control With position sensor SMAT-8M, SMAT-8E, SDAT page 60 With proportional pressure regulator VPPM Analogue position feedback possible Analogue output 0 10 V 0 20 ma Infinite adjustment of the gripping force possible Setpoint input 0 10 V 4 20 ma Optional accessories Mounting kit DAVM page 55 For lateral valve assembly, directly on the drive Particularly suitable for decentralised use in large systems Mounting is only possible on the side on which the pneumatic connections are located Application examples Automatic screw machine For process control 2017/11 Subject to change Internet: 3

4 Key features Variants from the modular product system Symbol Key features Description Q Square piston rod Protection against rotation. For correctly oriented feeding C Clamping unit Integrated clamping unit on the piston rod E1/E2/ E3 With end-position locking Positive locking in the end position as a drop guard. If there is a drop in pressure, the piston rod is secured in its end position to prevent it from dropping L Low friction At high piston speeds, considerably greater efficiency than other versions. The special materials considerably reduce system wear. Low-friction movements are therefore possible, especially during rapid stroke movements. U Uniform, slow movement Low break-away pressure, suitable for slow stroke movements at a constant, judder-free speed over the full stroke range. L1 Low friction for balancer applications At low piston speeds, low-friction operation is achieved in both directions. Special geometry of the seal enables virtually identical running characteristics regardless of the operating pressure. Additionally with low break-away pressure. Not suitable for applications with transverse loading on the piston rod. T Through piston rod For working at both ends with the same force in the forward and return stroke, for attaching external stops F Female piston rod thread 4 Internet: Subject to change 2017/11

5 Key features Variants from the modular product system Symbol Key features Description R3 High corrosion protection All external cylinder surfaces comply with corrosion resistance class 3 to Festo standard The piston rod is made from corrosion and acid-resistant steel T1 Heat-resistant seals Temperature range C T3 Low temperature Temperature range C T4 Heat-resistant seals Temperature range C ÓÓÓÓÓÓ ÓÓÓÓÓÓ ÓÓÓÓÓÓ A1 Scraper variant Increased chemical resistance: For longer service life, e.g. when using cooling lubricants. A2 Scraper variant Hard scraper: The cylinder is equipped with a hard-chrome plated piston rod and a hard scraper, which protects against dry, dusty and viscous media A3 Scraper variant Unlubricated operation: Cleaning processes degrease the piston rod. A special piston rod seal designed for unlubricated operation permits a longer service life compared to the standard seal A6 Scraper variant Metal scraper: The cylinder is fitted with a hard-chrome plated piston rod and a metal scraper, which scrapes off hard particles (e.g. welding spatter) adhering to the piston rod. For use in welding systems, for example E Piston rod extension L Piston rod thread extension 2017/11 Subject to change Internet: 5

6 Product range overview Function Design Type Piston Stroke Through piston rod Female piston rod thread Sensor slot on three sides Cushioning [mm] [mm] T F D3 P PPS PPV Doubleacting DSBC- DSBC- 32, 40, 50, 63, 80, 100, DSBC- -Q With protection against rotation DSBC- -Q 32, 40, 50, 63, 80, DSBC- -L/-U/-L1 With special running characteristics DSBC- -L 32, 40, 50, 63, 80, 100 DSBC- -U 32, 40, 50, 63, 80, 100, 125 DSBC- -L1 32, 40, 50, 63, 80, 100, DSBC- -C With clamping unit, standard hole pattern DSBC- -C 32, 40, 50, 63, 80, 100, DSBC- -E1/-E2/-E3 With end-position locking, standard hole pattern DSBC- -E1/ -E2/-E3 32, 40, 50, 63, 80, DSBC- -P2 With bellows, standard hole pattern DSBC- -P2 32, 40, 50, 63, 80, Internet: Subject to change 2017/11

7 Product range overview Type Position sensing High corrosion protection Temperature range C Temperature range C Temperature range C Scraper variant increased chemical resistance Scraper variant hard scraper (ring) Scraper variant For unlubricated operation Scraper variant Metal scraper EU certification Piston rod extension Piston rod thread extension DSBC- DSBC- A R3 T1 T3 T4 A1 A2 A3 A6 EX4 E L DSBC- -Q With protection against rotation DSBC- -Q DSBC- -L/-U/-L1 With special running characteristics DSBC- -L DSBC- -U DSBC- -L1 DSBC- -C With clamping unit, standard hole pattern DSBC- -C DSBC- -E1/-E2/-E3 With end-position locking, standard hole pattern DSBC- -E1/ -E2/-E3 DSBC- -P2 With bellows, standard hole pattern DSBC- -P2 2017/11 Subject to change Internet: 7

8 Type codes DSBC PPV A Type Double-acting DSBC Standards-based cylinder Protection against rotation Without protection against rotation Q With protection against rotation Running characteristics Standard L Low friction U Constant, slow movement L1 Low friction for balancer applications Piston [mm] Stroke [mm] Clamping unit None C Attached End-position locking None E1 At both ends E2 With piston rod in advanced position E3 With piston rod in retracted position Piston rod Piston rod at one end T Through piston rod Piston rod thread type Male thread F Female thread Profile type Sensor slot on 1 side D3 Sensor slot on 3 sides Cushioning P PPS PPV Elastic cushioning rings/pads at both ends Pneumatic cushioning, self-adjusting at both ends Pneumatic cushioning, adjustable at both ends Position sensing A Via proximity sensor 8 Internet: Subject to change 2017/11

9 Type codes Standard Based on ISO N3 Corresponds to ISO Corrosion protection Standard R3 High corrosion protection Temperature range Standard T C T C T C Protection against particles Standard P2 Bellows on bearing cap Scraper variant None A1 Increased chemical resistance A2 Hard scraper A3 For unlubricated operation A6 Metal scraper EU certification None EX4 II 2GD Piston rod extension None E mm Piston rod thread extension None L 1 70 mm N3 2017/11 Subject to change Internet: 9

10 Peripherals overview bg aj 5 9 ac bf be 8 aa bd aj aa ab 4 ae ad bb af ah bc ag ai bh 9 bj 1 bi ba Mounting components and accessories Description DSBC- Page/ L/U/ L1 C E1/E2 /E3 T Internet 1 Foot mounting HNC/CRHNC For bearing or end caps 39 2 Flange mounting FNC/CRFNG For bearing or end caps Cannot be used on the bearing cap in combination with bellows kit DADB 40 3 Trunnion flange ZNCF/CRZNG For bearing or end caps Cannot be used on the bearing cap in combination with bellows kit DADB 1) 41 4 Trunnion support LNZG/CRLNZG 1) 42 5 Swivel flange SNC For end caps 43 1) Cannot be mounted in combination with E1. Can only be mounted on the end cap in combination with E2. Can only be mounted on the bearing cap in combination with E3. 10 Internet: Subject to change 2017/11

11 Peripherals overview Mounting components and accessories Description DSBC- Page/ L/U/ L1 C E1/E2 /E3 T Internet 6 Clevis foot LSNG With spherical bearing 48 7 Clevis foot LSNSG Weld-on, with spherical bearing 48 8 Swivel flange SNCS/CRSNCS/SNCS- -R3 With spherical bearing for end caps 44 9 Clevis foot LBG/LBG- -R3 48 aj Swivel flange SNCL For end caps 46 aa Swivel flange SNCB/SNCB- -R3 For end caps 44 ab Clevis foot LNG/CRLNG 48 ac Clevis foot LSN With spherical bearing 48 ad Trunnion mounting kit DAMT For mounting anywhere along the cylinder profile barrel 47 ae Rod eye SGS/CRSGS With spherical bearing 49 af Right-angle clevis foot LQG 48 ag Rod clevis SGA With male thread 49 ah Coupling piece KSG To compensate for radial deviations 49 Coupling piece KSZ For cylinders with a non-rotating piston rod to compensate for radial deviations 49 ai Rod clevis SG/CRSG Permits a swivel motion of the cylinder in one plane 49 bj Self-aligning rod coupler FK, CRFK For compensating radial and angular misalignments 49 ba Guide unit FENG For protecting standards-based cylinders against rotation at high torque loads 58 bb Slot cover ABP-5-S For protecting the sensor cable and keeping dirt out of the sensor slots 61 bc Proximity sensor SME/SMT-8M Can be integrated in the cylinder profile barrel 59 bd One-way flow control valve GRLA For speed regulation grla be Push-in fitting QS For connecting compressed air tubing with standard O.D. qs bf Bellows kit DADB Protects the cylinder (piston rod, seal and bearings) against a wide range of media and thus prevents premature wear Can only be used in combination with an extended piston rod (E) 50 bg Multi-position kit DPNC For connecting two cylinders with identical piston diameters to form a multi-position cylinder 54 bh Position sensor SMAT, SDAT Continuously senses the position of the piston Has an analogue output 60 bi Slot nut ABAN Inserted in the slot from above /11 Subject to change Internet: 11

12 Technical data Function P cushioning DIN PPV cushioning -N- Diameter mm -T- Stroke length mm PPS cushioning -W- General technical data Piston Design Piston/piston rod/profile barrel Mode of operation Double-acting Pneumatic port DSBC- G1/8 G1/4 G1/4 G3/8 G3/8 G1/2 G1/2 DSBC- -C M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8 Piston rod thread M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5 M27x2 Stroke DSBC- [mm] DSBC- -Q [mm] DSBC- -L1 [mm] DSBC- -C [mm] DSBC- -E1/-E2/-E3 [mm] DSBC- -P2 [mm] DSBC- - E [mm] DSBC- - L [mm] Cushioning DSBC- -P Elastic cushioning rings/pads at both ends DSBC- -PPV Pneumatic cushioning, adjustable at both ends DSBC- -PPS Pneumatic cushioning, self-adjusting at both ends Cushioning length DSBC- -PPV [mm] DSBC- -E1/-E2/-E3 [mm] Position sensing Via proximity sensor Type of mounting Via internal thread/accessories Mounting position Any 12 Internet: Subject to change 2017/11

13 Technical data Operating and environmental conditions Piston Operating medium Compressed air to ISO :2010 [7:4:4] Note on operating/pilot medium Lubricated operation possible (in which case lubricated operation will always be required) Operating pressure DSBC- [bar] DSBC- -L 1) [bar] DSBC- -U 1) [bar] DSBC- -L1 1) [bar] DSBC- -C 2) [bar] DSBC- -E1/-E2/-E3 [bar] DSBC- -T3/-A2 [bar] DSBC- -A3 [bar] DSBC- -A6 [bar] Ambient temperature 3) DSBC- [ C] DSBC- -L/-A1 [ C] DSBC- -L1 [ C] DSBC- -A6 [ C] DSBC- -T1-A6 [ C] DSBC- -T3-A6 [ C] DSBC- -T4-A6 [ C] DSBC- -C [ C] DSBC- -T1 [ C] DSBC- -T3 [ C] DSBC- -T4 [ C] DSBC- -P2 [ C] DSBC- -EX4 [ C] Corrosion resistance class CRC DSBC- 2 4) DSBC- -R3 3 5) 1) Values apply only for strokes 500 mm and after 10 double strokes. In combination with cushioning PPV/PPS, the specifications only apply outside the cushioning range 2) Note min. release pressure page 19 3) Note operating range of proximity sensors 4) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. 5) Corrosion resistance class CRC 3 to Festo standard FN High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. 2017/11 Subject to change Internet: 13

14 Technical data Weight [g] Piston DSBC- Product weight with 0 mm stroke Additional weight per 10 mm stroke Moving mass with 0 mm stroke Moving mass per 10 mm stroke DSBC- -Q Product weight with 0 mm stroke Additional weight per 10 mm stroke Moving mass with 0 mm stroke Moving mass per 10 mm stroke DSBC- -C Product weight with 0 mm stroke Additional weight per 10 mm stroke Moving mass with 0 mm stroke Moving mass per 10 mm stroke DSBC- -E1/-E2/-E3 Product weight with 0 mm stroke DSBC- -E DSBC- -E DSBC- -E Additional weight per 10 mm stroke Moving mass with 0 mm stroke Moving mass per 10 mm stroke DSBC- -T Product weight with 0 mm stroke Additional weight per 10 mm stroke Moving mass with 0 mm stroke Moving mass per 10 mm stroke Internet: Subject to change 2017/11

15 Technical data ATEX 1) ATEX category for gas Type of (ignition) protection for gas ATEX category for dust Type of (ignition) protection for dust Explosion-proof ambient temperature CE marking (see declaration of conformity) II 2G c T4 II 2D c T120 C 20 C Ta +60 C As per EU Explosion Protection Directive (ATEX) 1) Note the ATEX certification of the accessories. Forces [N] and impact energy [J] Piston Theoretical force at 6 bar, advancing Theoretical force at 6 bar, retracting Max. impact energy in the end positions DSBC ) DSBC- -L/-U/-T1/-T3/-T ) DSBC- -L ) The max. energy in combination with the trunnion mounting kit DAMT is 0.1 J. Permissible impact velocity Maximum permissible load: 2xE perm. v perm. mintrinsic m Load m Load 2xE perm. v 2 m Intrinsic v perm. Permissible impact velocity E perm. Max. impact energy m Intrinsic Moving mass (drive) m Load Moving payload 2017/11 Subject to change Internet: 15

16 Technical data Max. transverse force Fq as a function of stroke length l Horizontal mounting Vertical mounting /63 80/ H- Note No transverse forces are permitted in combination with feature DSBC- -L1. Permissible torsional backlash with variant Q With protection against rotation Piston Torsional backlash [ ] Internet: Subject to change 2017/11

17 Technical data Max. transverse force Fq as a function of stroke length l and lever arm s Q With protection against rotation Max. torque = 800 Nmm/max. stroke = 300 mm Max. torque = 1100 Nmm/max. stroke = 400 mm S [mm] FQ [N] S [mm] FQ [N] l [mm] l [mm] 50/63 80/100 Max. torque = 1500 Nmm/max. stroke = 500 mm Max. torque = 3000 Nmm/max. stroke = 600 mm S [mm] FQ [N] S [mm] FQ [N] l [mm] l [mm] Examples for piston 32 mm Example 1: Stroke length l = 150 mm Result: Permissible Transverse force Fq= 9.5 N Lever arm s = 84 mm Example 2: Transverse force Fq= 40 N Result: Permissible Stroke length l = 28 mm Lever arm s = 20 mm Example 3: Stroke length l = 150 mm Lever arm s = 100 mm Max. torque 800 Nmm Fq = Lever arm 100 mm = 8 N Result: Permissible Fq = 8 N Fqmax. = 9.5 N Fq 2017/11 Subject to change Internet: 17

18 Technical data Materials Sectional view Basic design With clamping unit With end-position locking 6 7 Standards-based cylinder 1 Piston rod DSBC- High-alloy steel DSBC- -R3 High-alloy stainless steel DSBC- -A2/-A6 Hard-chromium plated tempered steel 2 Cover Die-cast aluminium, coated 3 Profile barrel Anodised wrought aluminium alloy 4 Housing, clamping unit Anodised wrought aluminium alloy 5 Clamping jaw Brass 6 Spring DSBC- -C Spring steel DSBC- -E1/E2/E3 High-alloy stainless steel 7 Piston DSBC- -C POM DSBC- -E1/E2/E3 Hardened steel Piston rod seal DSBC- PUR DSBC- -L/-U FPM DSBC- -L1 HNBR DSBC- -T1/-T4/-A1 FPM DSBC- -T3 PUR (suitable for low temperatures) DSBC- -A3 UHMW-PE Rod wiper seal DSBC- -A6 CuZn Buffer seal DSBC- PUR DSBC- -U FPM DSBC- -T1/-T4 FPM DSBC- -T3 PUR (suitable for low temperatures) Cushioning boss DSBC- POM DSBC- -L/-U Aluminium DSBC- -T1/-T3/-T4 Aluminium Note on materials DSBC- RoHS compliant DSBC- -L/U/-T3/-T4/-A3 Contains paint-wetting impairment substances 18 Internet: Subject to change 2017/11

19 Technical data Technical data DSBC- -C With clamping unit The specified holding force refers to a static load. If this value is exceeded, slippage may occur. Dynamic forces occurring during operation must not exceed the static holding force. The clamping unit is not backlash-free in the clamped condition if varying loads are applied to the piston rod. The clamping unit may only be released if the forces at the piston have reached equilibrium. Otherwise, there is a risk of accidents due to sudden movement of the piston rod. Blocking off the air supply at both ends (e.g. with a 5/3-way valve) does not provide any safety. Piston Clamping type with effective direction At both ends Clamping via spring force Release through compressed air Static holding force [N] Max. axial play under load [mm] Min. release pressure [bar] 3 Technical data DSBC- -E1/-E2/-E3 With end-position locking End-position locking should only be operated in conjunction with double-acting cylinders with exhaust air flow control in order to ensure that the lock is always completely released prior to starting the drive movement. The end-position locking may only be released if the forces at the piston have reached equilibrium. Otherwise, there is a risk of accidents due to sudden movement of the piston rod. Blocking off the air supply at both ends (e.g. with a 5/3-way valve) does not provide any safety. Locking can be performed from any stroke position once the drive is brought mechanically into its end position. A very tightly set end-position cushioning (more than 50% closed) can result in the locking bolt not engaging reliably, resulting in premature wear. The exhaust hole must not be closed. Piston Clamping type Positive locking through stop cylinder Release through compressed air Static holding force [N] Max. axial backlash with end position [mm] locked Min. unlocking pressure [bar] Max. locking pressure [bar] 0.5 Sizing example When sizing pneumatic cylinders it is recommended as a basic principle that only 50% of the indicated theoretical forces (see above) be used. Given: Mounting position = vertical Workpiece load = 44 kg F = m x g = 44 kg x 9.81 m/s 2 = N To be calculated: Suitable piston Example with 32 mm piston : Theoretical force at 6 bar, advancing = 483 N 50% of the theoretical force = N Static holding force with 32 mm piston = 500 N The static holding force of end-position locking is within the permissible range (max. 500 N) for a workpiece load of 44 kg (431.6 N), however the cylinder would be at 89% capacity. Result: A cylinder with a piston of 40 mm is therefore recommended for this application. 2017/11 Subject to change Internet: 19

20 Technical data Dimensions Download CAD data = plus stroke length 1 Socket head screw with female thread for mounting components 2 Regulating screw for adjustable end-position cushioning 3 Sensor slot for proximity sensor Variant T Through piston rod + = plus stroke length ++ = plus 2x stroke length 20 Internet: Subject to change 2017/11

21 Technical data A B BG E EE G U2 U1 KK [mm] 0.5 d11 Min ±0.1 ± G1/ M10x G1/ M12x G1/ M16x G3/ M16x G3/ M20x G1/ M20x G1/ M27x2 L2 L3 L7 L8 MM PM RT TG [mm] Max. ±0.4 ±0.1 ± M M M M M M M VA VD WH ZJ ZM ß1 ß2 ß3 [mm] /11 Subject to change Internet: 21

22 Technical data Dimensions Variants Q With protection against rotation F Female thread Download CAD data -H- Note In combination with variant T, the piston rod is protected against rotation at one end. -H- Note In combination with variant T, the piston rod has female threads at both ends. E Piston rod extension L Piston rod thread extension -H- Note Piston rod extension at one end in combination with the variant T. Piston rod extension only at the square piston rod in combination with the variant T and Q. -H- Note In combination with variant T, the piston rod thread is extended at both ends. D3 Sensor slot on 3 sides 3 Sensor slot for proximity sensor 22 Internet: Subject to change 2017/11

23 Technical data A A1 A2 AF [mm] Min. Max. Min. Max. Min B1 D1 EB KF T1 T2 WH [mm] Max M M / 0.05 M M M M M /11 Subject to change Internet: 23

24 Technical data Dimensions Variants C Clamping unit Download CAD data -H- Note The clamping unit can only be selected with variant T in combination with variant Q. The clamping unit is mounted on the round piston rod end in combination with variants T and Q. + = plus stroke length [mm] B d11 BG D1 D2 H1 L4 ±0.2 L5 VD WH ZW ± M G1/ G1/ G1/ G1/ G1/ G1/ Internet: Subject to change 2017/11

25 Technical data Dimensions Variants E1/E2/E3 End-position locking Download CAD data -H- Note 1 The connection is used for the manual interlock and/or ducted exhaust air. It must not be sealed or pressurised. E1 - End-position locking at both ends [mm] D1 D2 H1 L4 L M M M M M M E2 End-position locking with advanced piston rod [mm] D1 D2 H1 L M M M M M M E3 End-position locking with retracted piston rod [mm] D1 D2 H1 L M M M M M M /11 Subject to change Internet: 25

26 Technical data Dimensions Variants P2 Bellows on bearing cap Download CAD data + = plus stroke length Stroke A2 1) D1 D2 EE L1 L2 WH+A2 A2 1) D1 D2 EE L1 L2 WH+A2 [mm] Max. Max G1/ G1/ Stroke A2 1) D1 D2 EE L1 L2 WH+A2 A2 1) D1 D2 EE L1 L2 WH+A2 [mm] Max. Max G1/ G1/ ) The dimension corresponds to the E value (piston rod extension) of the drive 26 Internet: Subject to change 2017/11

27 Technical data Stroke A2 1) D1 D2 EE L1 L2 WH+A2 A2 1) D1 D2 EE L1 L2 WH+A2 [mm] Max. Max G1/ G1/ ) The dimension corresponds to the E value (piston rod extension) of the drive 2017/11 Subject to change Internet: 27

28 Technical data qcore product range Ordering data Stock items Piston Stroke With PPV cushioning With PPS cushioning [mm] [mm] Part No. Type Part No. Type q DSBC PPVA-N3 q DSBC PPSA-N3 25 q DSBC PPVA-N3 q DSBC PPSA-N3 30 q DSBC PPVA-N3 q DSBC PPSA-N3 40 q DSBC PPVA-N3 q DSBC PPSA-N3 50 q DSBC PPVA-N3 q DSBC PPSA-N3 60 q DSBC PPVA-N3 q DSBC PPSA-N3 70 q DSBC PPVA-N3 q DSBC PPSA-N3 80 q DSBC PPVA-N3 q DSBC PPSA-N3 100 q DSBC PPVA-N3 q DSBC PPSA-N3 125 q DSBC PPVA-N3 q DSBC PPSA-N3 150 q DSBC PPVA-N3 q DSBC PPSA-N3 160 q DSBC PPVA-N3 q DSBC PPSA-N3 200 q DSBC PPVA-N3 q DSBC PPSA-N3 250 q DSBC PPVA-N3 q DSBC PPSA-N3 300 q DSBC PPVA-N3 q DSBC PPSA-N3 320 q DSBC PPVA-N3 q DSBC PPSA-N3 400 q DSBC PPVA-N3 q DSBC PPSA-N3 500 q DSBC PPVA-N3 q DSBC PPSA-N q DSBC PPVA-N3 q DSBC PPSA-N3 25 q DSBC PPVA-N3 q DSBC PPSA-N3 30 q DSBC PPVA-N3 q DSBC PPSA-N3 40 q DSBC PPVA-N3 q DSBC PPSA-N3 50 q DSBC PPVA-N3 q DSBC PPSA-N3 60 q DSBC PPVA-N3 q DSBC PPSA-N3 70 q DSBC PPVA-N3 q DSBC PPSA-N3 80 q DSBC PPVA-N3 q DSBC PPSA-N3 100 q DSBC PPVA-N3 q DSBC PPSA-N3 125 q DSBC PPVA-N3 q DSBC PPSA-N3 150 q DSBC PPVA-N3 q DSBC PPSA-N3 160 q DSBC PPVA-N3 q DSBC PPSA-N3 200 q DSBC PPVA-N3 q DSBC PPSA-N3 250 q DSBC PPVA-N3 q DSBC PPSA-N3 300 q DSBC PPVA-N3 q DSBC PPSA-N3 320 q DSBC PPVA-N3 q DSBC PPSA-N3 400 q DSBC PPVA-N3 q DSBC PPSA-N3 500 q DSBC PPVA-N3 q DSBC PPSA-N3 -H- Note Other variants in the modular product system page 32 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 28 Internet: Subject to change 2017/11

29 Technical data qcore product range Ordering data Stock items Piston Stroke With PPV cushioning With PPS cushioning [mm] [mm] Part No. Type Part No. Type q DSBC PPVA-N3 q DSBC PPSA-N3 25 q DSBC PPVA-N3 q DSBC PPSA-N3 30 q DSBC PPVA-N3 q DSBC PPSA-N3 40 q DSBC PPVA-N3 q DSBC PPSA-N3 50 q DSBC PPVA-N3 q DSBC PPSA-N3 60 q DSBC PPVA-N3 q DSBC PPSA-N3 70 q DSBC PPVA-N3 q DSBC PPSA-N3 80 q DSBC PPVA-N3 q DSBC PPSA-N3 100 q DSBC PPVA-N3 q DSBC PPSA-N3 125 q DSBC PPVA-N3 q DSBC PPSA-N3 150 q DSBC PPVA-N3 q DSBC PPSA-N3 160 q DSBC PPVA-N3 q DSBC PPSA-N3 200 q DSBC PPVA-N3 q DSBC PPSA-N3 250 q DSBC PPVA-N3 q DSBC PPSA-N3 300 q DSBC PPVA-N3 q DSBC PPSA-N3 320 q DSBC PPVA-N3 q DSBC PPSA-N3 400 q DSBC PPVA-N3 q DSBC PPSA-N3 500 q DSBC PPVA-N3 q DSBC PPSA-N q DSBC PPVA-N3 q DSBC PPSA-N3 25 q DSBC PPVA-N3 q DSBC PPSA-N3 30 q DSBC PPVA-N3 q DSBC PPSA-N3 40 q DSBC PPVA-N3 q DSBC PPSA-N3 50 q DSBC PPVA-N3 q DSBC PPSA-N3 60 q DSBC PPVA-N3 q DSBC PPSA-N3 70 q DSBC PPVA-N3 q DSBC PPSA-N3 80 q DSBC PPVA-N3 q DSBC PPSA-N3 100 q DSBC PPVA-N3 q DSBC PPSA-N3 125 q DSBC PPVA-N3 q DSBC PPSA-N3 150 q DSBC PPVA-N3 q DSBC PPSA-N3 160 q DSBC PPVA-N3 q DSBC PPSA-N3 200 q DSBC PPVA-N3 q DSBC PPSA-N3 250 q DSBC PPVA-N3 q DSBC PPSA-N3 300 q DSBC PPVA-N3 q DSBC PPSA-N3 320 q DSBC PPVA-N3 q DSBC PPSA-N3 400 q DSBC PPVA-N3 q DSBC PPSA-N3 500 q DSBC PPVA-N3 q DSBC PPSA-N3 -H- Note Other variants in the modular product system page 32 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/11 Subject to change Internet: 29

30 Technical data qcore product range Ordering data Stock items Piston Stroke With PPV cushioning With PPS cushioning [mm] [mm] Part No. Type Part No. Type q DSBC PPVA-N3 q DSBC PPSA-N3 25 q DSBC PPVA-N3 q DSBC PPSA-N3 30 q DSBC PPVA-N3 q DSBC PPSA-N3 40 q DSBC PPVA-N3 q DSBC PPSA-N3 50 q DSBC PPVA-N3 q DSBC PPSA-N3 60 q DSBC PPVA-N3 q DSBC PPSA-N3 70 q DSBC PPVA-N3 q DSBC PPSA-N3 80 q DSBC PPVA-N3 q DSBC PPSA-N3 100 q DSBC PPVA-N3 q DSBC PPSA-N3 125 q DSBC PPVA-N3 q DSBC PPSA-N3 150 q DSBC PPVA-N3 q DSBC PPSA-N3 160 q DSBC PPVA-N3 q DSBC PPSA-N3 200 q DSBC PPVA-N3 q DSBC PPSA-N3 250 q DSBC PPVA-N3 q DSBC PPSA-N3 300 q DSBC PPVA-N3 q DSBC PPSA-N3 320 q DSBC PPVA-N3 q DSBC PPSA-N3 400 q DSBC PPVA-N3 q DSBC PPSA-N3 500 q DSBC PPVA-N3 q DSBC PPSA-N3 -H- Note Other variants in the modular product system page 32 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 30 Internet: Subject to change 2017/11

31 Technical data Ordering data Stock items Piston Stroke With PPV cushioning With PPS cushioning [mm] [mm] Part No. Type Part No. Type DSBC-32- -PPVA-N DSBC-32- -PPSA-N DSBC-40- -PPVA-N DSBC-40- -PPSA-N DSBC-50- -PPVA-N DSBC-50- -PPSA-N DSBC-63- -PPVA-N DSBC-63- -PPSA-N DSBC-80- -PPVA-N DSBC-80- -PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N DSBC PPVA-N DSBC PPSA-N3 -H- Note Other variants in the modular product system page /11 Subject to change Internet: 31

32 Ordering data Modular product system Ordering table Size Conditions Code Entry code 0M Module no Function Standards-based cylinder, double-acting, based on ISO DSBC DSBC 0O Protection against rotation None w With protection against rotation 1 w-q Running characteristics Standard w Low friction 2 L Constant, slow movement 2 U Low friction for balancer applications 3 L1 0M Piston [mm] w- Stroke [mm] w- 0O Piston rod type Piston rod at one end w Through piston rod w-t Piston rod thread type Male thread w Female thread 4 wf Profile type Sensor slot on 1 side w Sensor slot on 3 sides wd3 0M Cushioning Elastic cushioning rings/pads at both ends 5 -P Pneumatic cushioning, self-adjusting at both ends 6 w-pps Pneumatic cushioning, adjustable at both ends w-ppv Position sensing Via proximity sensor wa A 1 Q Not with L, U, L1, N3, T3, T4, P2, A1, A2, A3, A6 Only up to a stroke of 1500 mm 2 L, U Not with T, R3, T1, T3, T4, P2, A1, A2, A3, A6, EX4 3 L1 Not with T, PPV, R3, T1, T3, T4, P2, A1, A2, A3, A6, EX4 4 F Not with L 5 P Not with A1 6 PPS Not with T1, T3, T4, A1 -H- Note If feature L is used in combination with transverse loads or strokes of above 500 mm, suitable measures must be taken to support the piston rod. The operating pressure ( page 13) is applicable for strokes up to 500 mm. -H- Note If feature L1 is used in combination with strokes of above 500 mm, suitable measures must be taken to support the piston rod. The operating pressure ( page 13 ) is applicable for strokes up to 500 mm. M O Mandatory data Options Transfer order code DSBC A Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 32 Internet: Subject to change 2017/11

33 Ordering data Modular products Ordering table Size Conditions Code Entry code Standard Based on ISO w 0O Corresponds to ISO w-n3 Corrosion protection Standard w High corrosion protection 7 wr3 Temperature range Standard w [ C] Heat-resistant seals up to max wt1 [ C] T3 [ C] T4 Protection against particles Standard w Bellows on bearing cap 9 P2 Scraper variant None w Increased chemical resistance A1 Hard scraper A2 For unlubricated operation A3 Metal scraper A6 EU certification None w [mm] II 2GD aj EX4 Piston rod extension None [mm] aa w- E Piston rod thread extension None [mm] aa - L 7 R3 Not with A2, A6 8 T1, T3, T4 Not with P2, A1, A2, A3, EX4 9 P2 Not with N3, A1, A2, A3, A6, EX4 Only for strokes of mm aj EX4 Not with T1, T3, T4, P2, A1, A3, A6 aa E, L Only up to a stroke of 2000 mm -H- Note The piston rod extension for the bellows is automatically taken into consideration when feature P2 is selected. This means that there is no need to specify a value for feature E. -H- Note When selecting feature E in combination with feature P2, the part of the piston rod extension E is not covered by the bellows. -H- Note When feature P2 is selected in combination with feature T (through piston rod), the bellows is mounted on one side only. M O Mandatory data Options Transfer order code Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/11 Subject to change Internet: 33

34 Standards-based cylinders DSBC, standard hole pattern, with clamping unit Ordering data Modular products Ordering table Size Conditions Code Entry code 0M Module no Function Standards-based cylinder, double-acting, based on ISO DSBC DSBC 0O Protection against rotation None w With protection against rotation 1 w-q 0M Piston [mm] w- Stroke [mm] w- 0O Clamping unit Attached w-c C Piston rod type Piston rod at one end w Through piston rod wt Piston rod thread type Male thread w Female thread 2 wf Profile type Sensor slot on 1 side w Sensor slot on 3 sides wd3 0M Cushioning Elastic cushioning rings/pads at both ends -P Pneumatic cushioning, self-adjusting at both ends w-pps Pneumatic cushioning, adjustable at both ends w-ppv Position sensing Via proximity sensor wa A Piston rod extension [mm] None w- E Piston rod thread extension [mm] None L 1 Q Only available with T Only up to stroke 1500 mm 2 F Not with L M O Mandatory data Options Transfer order code DSBC C A Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 34 Internet: Subject to change 2017/11

35 Standards-based cylinders DSBC, standard hole pattern, with end-position locking Ordering data Modular products Ordering table Size Conditions Code Entry code 0M Module no Function Standards-based cylinder, double-acting, based on ISO DSBC DSBC Piston [mm] Stroke [mm] O End-position locking None At both ends E1 With piston rod in advanced position E2 With piston rod in retracted position E3 Piston rod thread type Male thread Female thread 1 F Profile type Sensor slot on 1 side Sensor slot on 3 sides D3 0M Cushioning Elastic cushioning rings/pads at both ends -P Pneumatic cushioning, adjustable at both ends -PPV Position sensing Via proximity sensor A A Piston rod extension [mm] None E Piston rod thread extension [mm] None L 1 F Not with L M O Mandatory data Options Transfer order code DSBC A 2017/11 Subject to change Internet: 35

36 Technical data Ordering data Versions for DSBC- -D3 (sensor slots on 3 sides) In this version, the piston position can be sensed on 3 sides of the drive. 3 Slot for proximity sensor Piston Stroke With PPV cushioning With PPS cushioning [mm] [mm] Part No. Type Part No. Type DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N3 36 Internet: Subject to change 2017/11

37 Technical data Ordering data Versions for DSBC- -D3 (sensor slots on 3 sides) In this version, the piston position can be sensed on 3 sides of the drive. 3 Slot for proximity sensor Piston Stroke With PPV cushioning With PPS cushioning [mm] [mm] Part No. Type Part No. Type DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N3 2017/11 Subject to change Internet: 37

38 Technical data Ordering data Versions for DSBC- -D3 (sensor slots on 3 sides) In this version, the piston position can be sensed on 3 sides of the drive. 3 Slot for proximity sensor Piston Stroke With PPV cushioning With PPS cushioning [mm] [mm] Part No. Type Part No. Type DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N DSBC D3-PPVA-N DSBC D3-PPSA-N3 38 Internet: Subject to change 2017/11

39 Accessories Foot mounting HNC/CRHNC Materials: HNC: Galvanised steel CRHNC: High-alloy steel Free of copper and PTFE + = plus stroke length Dimensions and ordering data For AB AH AO AT AU SA TR US XA XS [mm] DSBC- DSBC- -C DSBC- DSBC- -C For Basic design Corrosion resistant CRC 1) Weight Part No. Type 2) CRC 1) Weight Part No. Type 2) [mm] [g] [g] q HNC CRHNC q HNC CRHNC q HNC CRHNC q HNC CRHNC q HNC CRHNC HNC CRHNC HNC CRHNC-125 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. 2) Suitable for ATEX Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/11 Subject to change Internet: 39

40 Accessories Flange mounting FNC/CRFNG Materials: FNC: Galvanised steel CRFNG: High-alloy steel Free of copper and PTFE RoHS compliant + = plus stroke length Dimensions and ordering data For E FB MF R TF UF W ZF [mm] H13 DSBC- DSBC- -C For Basic design Corrosion resistant CRC 1) Weight Part No. Type 2) CRC 1) Weight Part No. Type 2) [mm] [g] [g] q FNC CRFNG q FNC CRFNG q FNC CRFNG q FNC CRFNG q FNC CRFNG FNC CRFNG FNC CRFNG-125 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. 2) Suitable for ATEX Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 40 Internet: Subject to change 2017/11

41 Accessories Trunnion flange ZNCF/CRZNG Materials: ZNCF: Stainless steel casting CRZNG: Electropolished stainless steel casting Free of copper and PTFE RoHS compliant + = plus stroke length Dimensions and ordering data For C2 C3 TD TK TL TM US XH XL [mm] e9 DSBC- DSBC- -C For Basic design High corrosion protection CRC 1) Weight Part No. Type 2) CRC 1) Weight Part No. Type 2) [mm] [g] [g] ZNCF CRZNG ZNCF CRZNG ZNCF CRZNG ZNCF CRZNG ZNCF CRZNG ZNCF CRZNG ZNCF CRZNG-125 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. 2) Suitable for ATEX 2017/11 Subject to change Internet: 41

42 Accessories Trunnion support LNZG Materials: Trunnion support: Anodised aluminium Plain bearing: Plastic Free of copper and PTFE RoHS compliant Dimensions and ordering data For CR DA FK FN FS H1 HB KE NH TH UL CRC 1) Weight Part No. Type [mm] D11 H13 ±0.1 H13 ±0.2 [g] LNZG-32 40, LNZG-40/50 63, LNZG-63/80 100, LNZG-100/125 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Trunnion support CRLNZG Materials: High-alloy steel Free of copper and PTFE RoHS compliant Dimensions and ordering data For CR FK FN FS H1 HB NH TH UL CRC 1) Weight Part No. Type [mm] D11 ±0.1 H13 ±0.2 [g] CRLNZG-32 40, CRLNZG-40/50 63, CRLNZG-63/80 100, CRLNZG-100/125 1) Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. 42 Internet: Subject to change 2017/11

43 Accessories Swivel flange SNC Materials: Die-cast aluminium RoHS-compliant + = plus stroke length 1 The king pin is protected against rotation with a spring pin. Dimensions and ordering data For CG CP E EK FL L SR [mm] H14 h14 H9 ± / / For TG XC CRC 1) Weight Part No. Type 2) [mm] DSBC- DSBC- -C [g] q SNC q SNC q SNC q SNC q SNC SNC SNC-125 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. 2) ATEX-compliant Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/11 Subject to change Internet: 43

44 Accessories Swivel flange SNCB/SNCB- -R3 Materials: SNCB: Die-cast aluminium SNCB- -R3: Die-cast aluminium with protective coating Free of copper and PTFE RoHS-compliant + = plus stroke length Dimensions and ordering data For CB E EK FL L MR TG UB XC [mm] H14 H9/e8 ± h14 DSBC- DSBC- -C / / For Basic design R3 High corrosion protection CRC 1) Weight Part No. Type CRC 1) Weight Part No. Type [mm] [g] [g] q SNCB SNCB-32-R q SNCB SNCB-40-R q SNCB SNCB-50-R q SNCB SNCB-63-R q SNCB SNCB-80-R SNCB SNCB-100-R SNCB SNCB-125-R3 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Corrosion resistance class CRC 3 to Festo standard FN High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 44 Internet: Subject to change 2017/11

45 Accessories Swivel flange SNCS/CRSNCS/SNCS- -R3 Materials: SNCS 32 50: Die-cast aluminium SNCS : Wrought aluminium alloy CRSNCS 32 80: High-alloy stainless steel SNCS- -R : Wrought aluminium alloy with protective coating RoHS-compliant + = plus stroke length Dimensions and ordering data For [mm] CN E EP EX FL LT DSBC- DSBC- -R3 DSBC- DSBC- -R3 ±0.2 ± / / / / / ,5± / ,2± / / / / / / For MS RA TG XC DSBC- DSBC- -R3 DSBC- DSBC- -R3 DSBC- DSBC- -C [mm] ±0.5 30± ±0.5 39± For Basic version High corrosion protection CRC 1) Weight Part No. Type CRC 1) Weight Part No. Type [mm] [g] [g] q SNCS CRSNCS q SNCS CRSNCS q SNCS CRSNCS q SNCS CRSNCS q SNCS CRSNCS SNCS SNCS-100-R SNCS SNCS-125-R3 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Corrosion resistance class CRC 3 to Festo standard FN High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. Corrosion resistance class CRC 4 to Festo standard FN Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be supported by special tests ( also FN ) using appropriate media. Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/11 Subject to change Internet: 45

46 Accessories Swivel flange SNCL Materials: Die-cast aluminium Free of copper and PTFE RoHS-compliant + = plus stroke length Dimensions and ordering data For CD E EW FL L MR [mm] H9 h12 ± / / For TG XC CRC 1) Weight Part No. Type DSBC- DSBC- -C [mm] [g] q SNCL q SNCL q SNCL q SNCL q SNCL SNCL SNCL-125 1) Corrosion resistance class CRC 2 to Festo standard FN Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmosphere typical for industrial applications. Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 46 Internet: Subject to change 2017/11

47 Accessories Trunnion mounting kit DAMT The mounting kit can be attached at any position along the profile barrel of the cylinder. Materials: Galvanised steel RoHS compliant + = plus stroke length +½ = plus half stroke length 1 Max. tightening torque Dimensions and ordering data For B1 C2 C3 TD TL TM UW [mm] e For XG XJ XV Max. CRC 1) Weight Part No. Type 2) tightening torque [mm] Min. max. [Nm] [g] q DAMT-V1-32-A q DAMT-V1-40-A q DAMT-V1-50-A q DAMT-V1-63-A q DAMT-V1-80-A DAMT-V1-100-A DAMT-V8-125-A 1) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). 2) Suitable for ATEX Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/11 Subject to change Internet: 47

48 Accessories Ordering data Mounting components Technical data Internet: clevis foot Description For Part No. Type Description For Part No. Type Clevis foot LNG Clevis foot LSN 32 q33890 LNG LSN q33891 LNG LSN q33892 LNG LSN q33893 LNG LSN q33894 LNG LSN LNG LSN LNG LSN-125 Clevis foot LSNG Clevis foot LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG-125 Clevis foot LBG 1) Right-angle clevis foot LQG 1) LBG LQG LBG LQG LBG LQG LBG LQG LBG LQG LBG LQG LBG LQG-125 1) Suitable for ATEX Ordering data Mounting components, corrosion-resistant Technical data Internet: crlng Description For Part No. Type Clevis foot CRLNG CRLNG CRLNG CRLNG CRLNG CRLNG CRLNG CRLNG-125 Ordering Mounting attachments, high corrosion protection Technical data Internet: clevis foot Designation For Part No. Type Clevis foot LBG-R LBG-32-R LBG-40-R LBG-50-R LBG-63-R LBG-80-R LBG-100-R LBG-125-R3 Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 48 Internet: Subject to change 2017/11

49 Accessories Ordering data Piston rod attachments Technical data Internet: piston-rod attachment Description For Part No. Type Description For Part No. Type Rod eye SGS Rod clevis SGA 1) 32 q9261 SGS-M10x1, SGA-M10x1,25 40 q9262 SGS-M12x1, SGA-M12x1,25 50 q9263 SGS-M16x1, SGA-M16x1, q9264 SGS-M20x1, SGA-M20x1, SGS-M27x SGA-M27x2 Rod clevis SG 1) Self-aligning rod coupler FK 1) 32 q6144 SG-M10x1,25 32 q6140 FK-M10x1,25 40 q6145 SG-M12x1,25 40 q6141 FK-M12x1,25 50 q6146 SG-M16x1,5 50 q6142 FK-M16x1, q6147 SG-M20x1,5 80 q6143 FK-M20x1, SG-M27x2-B FK-M27x2 Coupling piece KSG 1) Coupling piece KSZ 1) KSG-M10x1, KSZ-M10x1, KSG-M12x1, KSZ-M12x1, KSG-M16x1, KSZ-M16x1, KSG-M20x1, KSZ-M20x1, KSG-M27x ) Suitable for ATEX Ordering data Piston-rod attachments, corrosion-resistant Technical data Internet: piston-rod attachment Description For Part No. Type Description For Part No. Type Rod eye CRSGS Rod clevis CRSG 1) CRSGS-M10x1, CRSG-M10x1, CRSGS-M12x1, CRSG-M12x1, CRSGS-M16x1, CRSG-M16x1, CRSGS-M20x1, CRSG-M20x1, CRSGS-M27x CRSG-M27x2 Self-aligning rod coupler CRFK 1) CRFK-M10x1, CRFK-M12x1, CRFK-M16x1, CRFK-M20x1, ) Suitable for ATEX Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/11 Subject to change Internet: 49

50 Accessories Bellows kit DADB General technical data Type DADB-V Max. stroke range of cylinder 1) [mm] Type of mounting Via threaded pin Mounting position Any Resistance to media Dust, chippings, oil, grease, fuel ( Internet: Resistance to media) Ambient temperature 2) [ C] Degree of protection IP54 Corrosion resistance class CRC 3) 3 1) In combination with bellows kit DADB 2) Note operating range of proximity sensors and cylinder 3) Corrosion resistance class CRC 3 to Festo standard FN High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. Materials Sectional view Bellows 1 Connection Polyamide 2 Adapter Polyamide 3 Bellows NBR 4 End piece Polyamide 5 Connector Polyamide O-ring NBR Note on materials Free of copper and PTFE RoHS compliant Weight [g] Type DADB-V Stroke [mm] Internet: Subject to change 2017/11

51 Accessories Travel speed v as a function of tubing length l 1 The bellows kit is a leak-free system. To prevent unwanted media from being drawn in, the supply and exhaust air must be ducted via a pressure compensation hole in the connection part 1. The pressure generated in the bellows kit by the positioning motion is primarily defined by the travel speed and tubing length. The recommended tubing length based on the travel speed of the drive can be read from the graph. Advancing Retracting 32/50/ / /63 80/100 -H- Note The push-in fittings in the adjacent table must be used for the pressure compensation hole. Silencers can be used as an alternative. This reduces the travel speed slightly. Tube size and push-in fitting for pressure compensation hole [mm] Tubing O.D. [mm] Push-in fitting Part No. 32, 40 8 q QS-G1/8-8-I NPQH-DK-G18-Q8-P NPQH-D-G18-S8-P10 50, 63, 80, q QS-G1/ NPQH-D-G14-Q12-P NPQH-D-G14-S12-P10 Type Festo core product range qready for dispatch from the Festo factory in 24 hours wready for dispatch in 5 days maximum from stock 2017/11 Subject to change Internet: 51

52 Accessories Dimensions Download CAD data + = plus stroke length Stroke A2 1) D1 D2 EE L1 L2 WH+A2 A2 1) D1 D2 EE L1 L2 WH+A2 [mm] max. max G1/ G1/ Stroke A2 1) D1 D2 EE L1 L2 WH+A2 A2 1) D1 D2 EE L1 L2 WH+A2 [mm] max. max G1/ G1/ Stroke A2 1) D1 D2 EE L1 L2 WH+A2 A2 1) D1 D2 EE L1 L2 WH+A2 [mm] max. max G1/ G1/ ) The dimension corresponds to the E value (piston rod extension) of the drive 52 Internet: Subject to change 2017/11

53 Accessories Ordering data Bellows kit An extended piston rod (order code E) is required when using a bellows kit Ordering data Modular products. The necessary dimension for order code E as a function of piston diameter and cylinder stroke as well as the corresponding bellows kit is indicated in the table below: Order example: Selected standards-based cylinder: DSBC PPV-A- The dimension for the corresponding E value (see table): 112 mm Complete type code for standards-based cylinder: DSBC PPV-A- -112E The corresponding bellows kit: DADB-V6-32-S Cylinder data Bellows kit Cylinder data Bellows kit [mm] Stroke [mm] Dimension for E [mm] Part No. Type [mm] Stroke [mm] Dimension for E [mm] Part No. Type DADB-V6-32-S DADB-V6-40-S DADB-V6-32-S DADB-V6-40-S DADB-V6-32-S DADB-V6-40-S DADB-V6-32-S DADB-V6-40-S DADB-V6-32-S DADB-V6-40-S DADB-V6-32-S DADB-V6-40-S DADB-V6-32-S DADB-V6-40-S DADB-V6-32-S DADB-V6-40-S DADB-V6-32-S DADB-V6-40-S DADB-V6-32-S DADB-V6-40-S DADB-V6-50-S DADB-V6-63-S DADB-V6-50-S DADB-V6-63-S DADB-V6-50-S DADB-V6-63-S DADB-V6-50-S DADB-V6-63-S DADB-V6-50-S DADB-V6-63-S DADB-V6-50-S DADB-V6-63-S DADB-V6-50-S DADB-V6-63-S DADB-V6-50-S DADB-V6-63-S DADB-V6-50-S DADB-V6-63-S DADB-V6-50-S DADB-V6-63-S DADB-V6-80-S DADB-V6-100-S DADB-V6-80-S DADB-V6-100-S DADB-V6-80-S DADB-V6-100-S DADB-V6-80-S DADB-V6-100-S DADB-V6-80-S DADB-V6-100-S DADB-V6-80-S DADB-V6-100-S DADB-V6-80-S DADB-V6-100-S DADB-V6-80-S DADB-V6-100-S DADB-V6-80-S DADB-V6-100-S DADB-V6-80-S DADB-V6-100-S /11 Subject to change Internet: 53

54 Accessories Multi-position kit DPNC Materials: Flange: Wrought aluminium alloy Threaded pins, hex nuts: Galvanised steel + = plus stroke length Dimensions and ordering data For F1 ZJ Max. Weight Part No. Type 1) DSBC- DSBC- -C total stroke [mm] +1.8 [mm] [g] -H- Note The maximum overall stroke length must not be exceeded when combining cylinders and multi-position kits DPNC DPNC DPNC DPNC DPNC DPNC DPNC-125 1) Suitable for ATEX Connecting two cylinders with identical piston as a 3 or 4-position cylinder A 3 or 4-position cylinder consists of two separate cylinders whose piston rods advance in opposing directions. This means that depending on actuation and stroke division, this type of cylinder can assume up to four positions. In each case the cylinder is driven precisely against a stop. Note that when one end of the piston rod is fixed, the cylinder barrel executes the movement. The line connections to the cylinder must be flexible. To achieve 3 positions To achieve 4 positions Two cylinders with identical stroke lengths must be connected together. Two cylinders with different stroke lengths must be connected together. 54 Internet: Subject to change 2017/11

Standard cylinders DSBC, to ISO 15552

Standard cylinders DSBC, to ISO 15552 Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290) Double-acting For contactless

More information

Round cylinders DSNU/ESNU

Round cylinders DSNU/ESNU Round cylinders DSNU/ESNU q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing

More information

Standard cylinders DNC, ISO 15552

Standard cylinders DNC, ISO 15552 Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction

More information

Standard cylinders DNC, ISO 15552

Standard cylinders DNC, ISO 15552 Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction

More information

Standards-based cylinders DSBG to ISO 15552

Standards-based cylinders DSBG to ISO 15552 Standards-based cylinders DSBG to ISO 15552 Standards-based cylinders DSBG to ISO 15552 Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431,

More information

Round cylinders DSNU/DSNUP/DSN/ESNU/ESN

Round cylinders DSNU/DSNUP/DSN/ESNU/ESN Round cylinders DSNU/DSNUP/DSN/ESNU/ESN Round cylinders DSNU/DSNUP/DSN/ESNU/ESN Key features At a glance DSNU-8 63 DSNU-8 25 Stainless steel piston rod Good running performance and long service Piston

More information

Compact cylinders ADN/AEN, to ISO 21287

Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement

More information

Compact cylinders ADN/AEN, to ISO 21287

Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap

More information

Short-stroke cylinders ADVC/AEVC

Short-stroke cylinders ADVC/AEVC Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing

More information

Cylinders DSBG to ISO 15552

Cylinders DSBG to ISO 15552 Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless

More information

Standard cylinders DSBF-C, to ISO 15552, Clean Design

Standard cylinders DSBF-C, to ISO 15552, Clean Design Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NF E 49 003.1 and UNI 10290) The standard cylinder is used

More information

Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287

Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation

More information

Standard cylinders DSBG, to ISO 15552

Standard cylinders DSBG, to ISO 15552 Key features At a glance DIN Cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NFE49003.1 and UNI 10290) Sturdy tie rod design Double-acting For contactless

More information

Standard cylinders DNC-C180, to ISO 15552

Standard cylinders DNC-C180, to ISO 15552 Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and

More information

Standard cylinders DNCI, with measured-value transducer DADE

Standard cylinders DNCI, with measured-value transducer DADE Features Components for positioning and measuring using the standard cylinder DNCI Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX

More information

Round cylinders DSNU/ESNU

Round cylinders DSNU/ESNU Round cylinders DSNU/ESNU Reacts quickly thanks to minimal break-away force Meets the highest requirements for running characteristics, service life and load carrying ability Extensive range of accessories

More information

Clamping-unit cylinders, standard port pattern

Clamping-unit cylinders, standard port pattern Key features At a glance Clamping units are generally used for the friction locking of longitudinally variable rods at any position. The attachment of a clamping unit to a pneumatic cylinder allows the

More information

Guided drives DFM/DFM-B

Guided drives DFM/DFM-B Guided drives DFM/DFM-B q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

Multi-position cylinders/adapter kits

Multi-position cylinders/adapter kits Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended

More information

Piston rod attachments

Piston rod attachments Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

Tandem/high-force cylinders

Tandem/high-force cylinders Tandem/high-force cylinders Tandem/high-force cylinders Product range overview Function Version Type Piston Stroke Position sensing Piston rod With male thread A Doubleacting Tandem cylinders DNCT 32,

More information

Guided drives DFM/DFM-B

Guided drives DFM/DFM-B Guided drives DFM/DFM-B q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

Standard cylinders DNCB, ISO 15552

Standard cylinders DNCB, ISO 15552 Standard cylinders DNCB, ISO 15552 Features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290)

More information

Twin-piston semi-rotary drives DRRD

Twin-piston semi-rotary drives DRRD Twin-piston semi-rotary drives DRRD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and

More information

Standard cylinders DDPC, with measured-value transducer DADE

Standard cylinders DDPC, with measured-value transducer DADE Features Components for positioning and measuring using the standard cylinder DDPC Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX

More information

Stainless steel cylinders

Stainless steel cylinders Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/12 Subject to change Internet: www.festo.com/catalogue/...

More information

Standard cylinders DNC-C180, to ISO 15552

Standard cylinders DNC-C180, to ISO 15552 -U- Type discontinued Available up until 2016 Standard cylinders DNC-C180, to ISO 15552 Key features At a glance Sensor slots on the compressed air connection side Standards-based cylinders to ISO15552

More information

Piston rod attachments

Piston rod attachments Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

Linear drives DGC-K. Festo core product range Covers 80% of your automation tasks

Linear drives DGC-K. Festo core product range Covers 80% of your automation tasks q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

More information

Linear drives DGC. Festo core product range Covers 80% of your automation tasks

Linear drives DGC. Festo core product range Covers 80% of your automation tasks Linear drives DGC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

Electric cylinders ESBF, with spindle drive

Electric cylinders ESBF, with spindle drive q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

More information

Stainless steel cylinders

Stainless steel cylinders Stainless steel cylinders Corrosion-resistant in harsh ambient conditions Easy-to-clean design Wide choice of variants Comprehensive range of accessories 2017/10 Subject to change Internet: www.festo.com/catalog/...

More information

Linear actuators DFPI

Linear actuators DFPI Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator

More information

Quarter turn actuators DFPD

Quarter turn actuators DFPD Quarter turn actuators DFPD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing

More information

Flat cylinders EZH/DZF/DZH

Flat cylinders EZH/DZF/DZH Flat cylinders EZH/DZF/DZH Extremely flat design Protected against torsion thanks to special piston shape Compact assembly with block mounting Wide variety of mounting options 2017/10 Subject to change

More information

Hinge cylinders DFAW

Hinge cylinders DFAW Key features At a glance Hinge cylinder for clamping components during the welding process Sintered bronze bushes as lowfriction bearing material on rod clevis and swivel bearing Clamping unit: With piston

More information

Standard cylinders DSBF-C, to ISO 15552, Clean Design

Standard cylinders DSBF-C, to ISO 15552, Clean Design Key features At a glance Design Easy to clean Easy to mount Flexible DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1

More information

Guided drives DGRF-C, Clean Design

Guided drives DGRF-C, Clean Design Features and Product range overview At a glance The guided drive is used wherever hygiene, ease of cleaning and resistance are important, predominantly in dry and splash zones in the food and packaging

More information

Linear actuators DLP, Copac

Linear actuators DLP, Copac Key features and type codes General -N- Diameter 80... 320 mm -T- Stroke length 40... 600 mm, additional stroke lengths upon request -O- Force 2800... 48000 N Festo Copac linear valve actuators are ideally

More information

Linear/swivel clamp CLR

Linear/swivel clamp CLR Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and

More information

Standard cylinders DNG/DNGZS, ISO 15552

Standard cylinders DNG/DNGZS, ISO 15552 Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to

More information

Check valves H/HA/HB/HGL

Check valves H/HA/HB/HGL Check valves H/HA/HB/HGL q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

Twin-piston semi-rotary drives DRRD

Twin-piston semi-rotary drives DRRD Twin-piston semi-rotary drives DRRD Twin-piston semi-rotary drives DRRD Key features At a glance Rack and pinion principle Very high accuracy in the end positions Very high bearing load capacity Very good

More information

Clamping cartridges/units

Clamping cartridges/units Clamping cartridges/units Holding, clamping and braking of round material Wide choice of variants Any assembly position 2017/11 Subject to change Internet: www.festo.com/catalogue/... 1 Clamping cartridges/units

More information

Standard Cylinders DNC Inch Series, to ISO 15552

Standard Cylinders DNC Inch Series, to ISO 15552 Standard Cylinders DNC Inch Series, to ISO 5552 DNC Standard Cylinders meet ISO 5552 mounting, rod, bore and thread dimension specifications for easy interchangeability. Piston ¼ to 2½ Strokes of up to

More information

Semi-rotary drives DRVS

Semi-rotary drives DRVS Key features Key features at a glance Double-acting semi-rotary drive with rotary vanes Lighter than other semi-rotary drives Modern and compact design Fixed swivel angle Swivel angle can be adjusted with

More information

Mini slides DGSL. Festo core product range Covers 80% of your automation tasks

Mini slides DGSL. Festo core product range Covers 80% of your automation tasks q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

More information

Swivel modules DSM/DSM-B

Swivel modules DSM/DSM-B Swivel modules DSM/DSM-B Swivel modules DSM/DSM-B Key features At a glance Double-acting swivel module with rotary vanes The swivel angle is infinitely adjustable over the entire swivel range High precision

More information

Piston rod attachments

Piston rod attachments Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

Cartridge cylinders EGZ

Cartridge cylinders EGZ Peripherals overview and type codes 7 Installation without mounting attachments Minimal installation space required 4 3 2 1 Mounting attachments and accessories Description 1 Swivel mounting WBN 2 Flange

More information

-V- New. Linear drives DGC Features. 2 Internet:

-V- New. Linear drives DGC Features. 2 Internet: Linear drives DGC Features At a glance Without external guide, for simple drive functions Compact fitting length relative to stroke Fully interchangeable with the linear drive DGP Easy assembly and installation

More information

Positioners CMSX. Festo core product range Covers 80% of your automation tasks

Positioners CMSX. Festo core product range Covers 80% of your automation tasks Positioners CMSX q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

FAST TM Program Festo Assured Shipping Time

FAST TM Program Festo Assured Shipping Time FAST TM Program Festo Assured Shipping Time A complete line of automation components available when you need them! Maximum productivity for you and your customers - this is our mission. We all face the

More information

Compact cylinders CDC, ISO 21287, Clean Design

Compact cylinders CDC, ISO 21287, Clean Design Key features Design Easy to clean Easy to assemble Versatile With the CDC (Clean Design Compact) cylinder series, the ADN modular system has been expanded to include an easy to clean compact cylinder variant

More information

Semi-rotary drives DRQ

Semi-rotary drives DRQ Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree

More information

Suction cups VAS/VASB

Suction cups VAS/VASB s VAS/VASB q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready

More information

Solenoid valves VZWM-L

Solenoid valves VZWM-L q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

More information

Radial grippers DHRS

Radial grippers DHRS Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping

More information

-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process

-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1

More information

Compact cylinders ADVUL

Compact cylinders ADVUL Piston rod secured against rotation by means of guide rods and yoke plate Profile slots for proximity sensors Extensive range of accessories 2016/03 Subject to change Internet: www.festo.com/catalog/...

More information

Slide units SPZ, twin piston

Slide units SPZ, twin piston Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits www.festo.com

More information

Feed separators HPVS

Feed separators HPVS Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top

More information

Piston rod attachments

Piston rod attachments Piston rod attachments Co-ordinated with Festo s cylinder range Versatile combinations Sturdy and functional Stainless steel variants 2012/09 Subject to change Internet: www.festo.com/catalogue/... 1 Piston

More information

Threaded fittings. Festo core product range Covers 80% of your automation tasks

Threaded fittings. Festo core product range Covers 80% of your automation tasks Threaded fittings q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

Passive guide axes DGC-FA, without drive

Passive guide axes DGC-FA, without drive Key features At a glance Driveless linear guide units with guide and freely movable slide The passive guide axis is designed to support force and torque capacity in multi-axis applications Higher torsional

More information

FAST Program 2013 Festo Assured Shipping Time

FAST Program 2013 Festo Assured Shipping Time FAST Program 203 Festo Assured Shipping Time TM A complete line of automation components available when you need them! FAST TM Program 203 Festo Assured Shipping Time A complete line of automation components

More information

Silencers. Festo core product range Covers 80% of your automation tasks

Silencers. Festo core product range Covers 80% of your automation tasks Silencers q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready

More information

Radial grippers DHRS

Radial grippers DHRS Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping

More information

Quarter turn actuators DFPD

Quarter turn actuators DFPD Quarter turn actuators DFPD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing

More information

-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features

-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion

More information

Quarter turn actuators DFPB

Quarter turn actuators DFPB Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn

More information

Parallel grippers DHPS

Parallel grippers DHPS Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws Oval piston for high gripping forces High gripping forces with compact

More information

Guide units EAGF, for electric cylinders

Guide units EAGF, for electric cylinders Guide units EAGF, for electric cylinders q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement

More information

Three-point grippers DHDS

Three-point grippers DHDS Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws High gripping forces with compact dimensions Gripper jaw centring options

More information

Linear drives DGC Key features

Linear drives DGC Key features Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:

More information

Hinge cylinders DW Key features

Hinge cylinders DW Key features Key features At a glance Hinge cylinder for clamping components during the welding process Easy assembly thanks to swivel bearing on the bearing cap Integrated flow control Integrated end-position cushioning

More information

Compact cylinders ADN-S, AEN-S

Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece

More information

Electric cylinders EPCO, with spindle drive

Electric cylinders EPCO, with spindle drive q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

More information

Compact Cylinders ADN Inch Series, Based on ISO Overview

Compact Cylinders ADN Inch Series, Based on ISO Overview Compact Cylinders ADN Inch Series, Based on ISO 2287 Overview Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation space

More information

Pinch valves VZQA. Festo core product range Covers 80% of your automation tasks

Pinch valves VZQA. Festo core product range Covers 80% of your automation tasks q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready

More information

Parallel grippers HGPL-B, heavy-duty with long stroke

Parallel grippers HGPL-B, heavy-duty with long stroke Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and

More information

Mini slides SLT/SLS/SLF

Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks

More information

Standard cylinders DDPC, integrated displacement encoder

Standard cylinders DDPC, integrated displacement encoder Cylinders with displacement encoder Product range overview Function Type Description Drives Rodless DDLI Without guide With contactless measuring displacement encoder Based on linear drive DGC-K Supply

More information

Quarter turn actuators DFPD

Quarter turn actuators DFPD Quarter turn actuators DFPD Quarter turn actuators DFPD Key features Function The DFPD series features a rack and pinion combination with a constant torque characteristic across the entire swivel range.

More information

Solenoid valves MHJ, fast-switching valves

Solenoid valves MHJ, fast-switching valves Solenoid valves MHJ, fast-switching valves Solenoid valves MHJ, fast-switching valves Key features Innovative Versatile Reliable Easy to install Individual electrical connection via connecting cable and

More information

-H- Note. Angle grippers HGWC Key features. 2 Internet:

-H- Note. Angle grippers HGWC Key features. 2 Internet: Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion

More information

Swivel/linear drive units DSL-B

Swivel/linear drive units DSL-B Key features At a glance High repetition accuracy thanks to cushioning components with fixed stop Swivel angle can be infinitely and accurately set The mechanical gearing between the stop element and swivel

More information

Threaded fittings. Festo core product range Covers 80% of your automation tasks

Threaded fittings. Festo core product range Covers 80% of your automation tasks q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready

More information

Positioners CMSX. Festo core product range Covers 80% of your automation tasks

Positioners CMSX. Festo core product range Covers 80% of your automation tasks Positioners CMSX q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

Quarter turn actuators DFPB

Quarter turn actuators DFPB Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn

More information

Solenoid valves VZWF, force pilot operated

Solenoid valves VZWF, force pilot operated q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

More information

Solenoid coils VACF Type codes

Solenoid coils VACF Type codes Solenoid coils VACF Type codes VACF B B2 1A Type VACF Solenoid coil, F series Solenoid coil type A B Width 30 mm, for 8 mm armature tube Width 22 mm, for 8 mm armature tube A1 Connection pattern type A,

More information

-V- New. Valve series VOFC. 2009/08 Subject to change Internet:

-V- New. Valve series VOFC. 2009/08 Subject to change Internet: Valve series VOFC 2009/08 Subject to change Internet: www.festo.com/catalogue/... 159 Solenoid valves VOFC Key features General information The valves in the VOFC series are special 3/2-way and 5/2-way

More information

MFH MOFH JMFH JMFDH NVF3 MUFH VOFD VOFC VSNC VUVS

MFH MOFH JMFH JMFDH NVF3 MUFH VOFD VOFC VSNC VUVS Solenoid coils Solenoid coils Product range overview Version Type For valve series Page/ Internet MFH MOFH JMFH JMFDH NVF3 MUFH VOFD VOFC VSNC VUVS F solenoid coil MSF VACF 3 N solenoid coil VACN-N 6 N

More information

Pressure regulators MS-LR/LRB/LRP/LRPB/LRE, MS series

Pressure regulators MS-LR/LRB/LRP/LRPB/LRE, MS series Pressure regulators MS-LR/LRB/LRP/LRPB/LRE, MS series q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces

More information

Linear drive units DGO

Linear drive units DGO Features General information Double-acting Magnetically coupled without mechanical connections Piston chamber and slide are pressure tight Pressure tight and leak-free system Dirt and dust cannot enter

More information

Swivel modules DSMI-B, with integrated angular displacement encoder

Swivel modules DSMI-B, with integrated angular displacement encoder Cylinders with displacement encoder Product range overview Function Type Description Drives Rodless DDLI Without guide With contactless measuring displacement encoder Based on linear drive DGC-K Supply

More information

Accessories for electrical positioning systems

Accessories for electrical positioning systems Accessories for electrical positioning systems Accessories for electrical positioning systems Features At a glance Bellows couplings EAMC-B page 3 One-piece coupling with threaded pin locking, suitable

More information

Solenoid valves VUVS/valve manifold VTUS, NPT

Solenoid valves VUVS/valve manifold VTUS, NPT Solenoid valves VUVS/valve manifold VTUS, NPT -V- New VUVS-LT25, VTUS-25 Solenoid valves VUVS/valve manifold VTUS, NPT Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty

More information

On-off/soft-start valves MS-EM/EE/DL/DE, MS series

On-off/soft-start valves MS-EM/EE/DL/DE, MS series On-off/soft-start valves MS-EM/EE/DL/DE, MS series q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces

More information