TBi Industries. MIG / MAG Welding torches TBi Classic 2. 0

Transcription

1 TBi Industries MIG / MAG Welding torches TBi Classic

2

3 Gas cooled torches CONTENTS. TBi Classic TBi % (10 min.) Mix : 230 A CO 2 : 250 A Ø mm Water cooled torches TBi 150 (FX, DR) 60% (10 min.) Mix : 150 A CO 2 : 170 A Ø mm Page 4-5 Page 6-7 TBi 240 (DR) 60% (10 min.) Mix : 210 A (DR: 200 A) CO 2 : 210 A (DR: 210 A) Ø mm TBi 250 (FX, DR) 60% (10 min.) Mix : 200 A CO 2 : 230 A Ø mm Page 8-9 Page TBi 360 (DR) 60% (10 min.) Mix : 300 A (DR: 280 A) CO 2 : 330 A (DR: 310 A) Ø mm Page Page TBi % (10 min.) Mix : 200 A CO 2 : 210 A Ø mm TBi % (10 min.) Mix : 360 A CO 2 : 380 A Ø mm Page TBi % (10 min.) Mix : 270 A CO 2 : 300 A Ø mm TBi % (10 min.) Mix : 270 A CO 2 : 300 A Ø mm TBi % (10 min.) Mix : 350 A CO 2 : 400 A Ø mm TBi % (10 min.) Mix : 450 A CO 2 : 500 A Ø mm Page Page Page Page Wire guides Remote Control Modules Accessoires Page 24 Page 25 Page 26

4 Classic. TBi 150 (FX, DR) Technical Data Rating at 60% duty cycle (10 min. cycle) - Mixed gas: - CO 2 : Cooling method Wire diameter Gas flow 150 A 170 A Gas cooling mm 8 l /min Technical specification according to IEC Connection Euro-Central connector Other connectors are available upon request. Torch rating will be reduced when using pulsed-arc power sources. Contact tips 10 ECu, x P 1073* CuCrZr, x P 3073* Alu, ECu, x P 1073* = Standard equipment * At the blank, please insert suitable information for torch length or wire diameter, e.g. 3 for 3 m or 08 for 0.8 mm. Ordering information for torches Supplied equipped for steel wire Ø 0.8 mm. Liner, blue (Ø mm). TBi 150 Adapter nut basic 3 m 102P m 102P m 102P TBi 150 Adapter nut brass 3 m 102P939A30 4 m 102P939A40 5 m 102P939A50 TBi 150 FX TBi 150 DR flexible neck (adapter nut brass ) changeable swivel neck (adapter nut basic ) 3 m 102P34133F 4 m 102P34134F 5 m 102P34135F 3 m 102P34133D 4 m 102P34134D 5 m 102P34135D Description 50 Torch neck TBi 150, P Torch neck TBi 150 DR (swivel), P Torch neck TBi 150 FX (flexible) 102P Nozzle support TBi 150 w/o spring 102P Nozzle spring TBi 140/145/ P Head insulator TBi 140/145/ P Head insulator TBi 150 FX 102P Support for DR necks 600P Hex brass body M10x1 600P PVC body 600P Handle blue, aircooled, cpl. kit 380P Cross recessed screw M 3.5x14 100P Trigger, red, 2 poles 385P

5 TBi 150 FX TBi 150 DR TBi M10x M10x1 71 Gas nozzle 40 conical, NW 12 mm L = 54 mm 345P bottle form, NW 12.5 mm L = 53 mm 345P conical, NW 12 mm long insulation L = 53 mm 41 conical, NW 9.5 mm L = 53 mm 42 cylindrical, NW 16 mm long insulation L = 53 mm 345P P P spot welding nozzle, 345P NW 16 mm, long insulation L = 60 mm 45 nozzle for nails, NW 16 mm L= 60 mm 345P Description 70 Coaxial cable TBi ProFlex S 361P0S11_0* 71 Hex nut M10x1 101P Spring support small, black 600P Cable support cpl. (2 pieces) 701P Adaptor nut (basic version) 701P Adaptor nut (brass) 701P Central adaptor ESG cpl., 2 poles, moveable pins 701P Sleeve nut M10x1 701P O-ring 4.0x1.0 mm (gas nipple) 365P Slotted screw M4x6 100P Description 80 Cable lug, flat 375P Insulated connector, male, round 375P Insulated connector, female, round 375P

6 Classic. TBi 230 Technical Data Rating at 60% duty cycle (10 min. cycle) - Mixed gas: - CO 2 : Cooling method Wire diameter Gas flow 200 A 210 A Gas cooling mm 10 l /min Technical specification according to IEC Connection Euro-Central connector Other connectors are available upon request. Torch rating will be reduced when using pulsed-arc power sources. Contact tips Tip holder 10 ECu, x P 1073* CuCrZr, x P 3073* Alu, ECu, x P 1073* 20 for contact tip 342P = Standard equipment * At the blank, please insert suitable information for torch length or wire diameter, e.g. 3 for 3 m or 08 for 0.8 mm. Ordering information for torches Supplied equipped for steel wire Ø 1.0 mm. Liner, red (Ø mm). TBi 230 Adapter nut brass 3 m 105P m 105P m 105P Description 50 Torch neck TBi 230, P Hex-connector M10 x 1 600P Handle small, blue, cpl. (TBi 230) 380P Trigger, red, 2 poles 385P

7 TBi 230 M10x M10x1 71 Gas diffusor Gas nozzle 30 rubber, red long life thermoset, black, very robust ceramic, white, extremely heat resistant 112P P P conical, NW 12.5 mm 40 conical, NW 12.5 mm, Heavy Duty 41 conical, NW 10 mm 345P P P cylindrical, NW 17 mm 345P cylindrical, NW 17 mm Heavy Duty 43 spot welding nozzle, NW 17 mm L = 68 mm 345P P Description 70 Coaxial cable TBi ProFlex M 361P0M11_0* 71 Hex nut M10x1 101P Spring support small, black 600P Cable support cpl. (2 pieces) 701P Adaptor nut (brass) 701P Central adaptor ESG cpl., 2 poles, moveable pins 701P Sleeve nut M10x1 701P O-ring 4.0 x1.0 mm (gas nipple) 365P Slotted screw M4x6 100P Description 80 Cable lug, flat 375P Insulated connector, male, round 375P Insulated connector, female, round 375P

8 Classic. TBi 240 (DR) Technical Data Rating at 60% duty cycle (10 min. cycle) - Mixed gas: - CO 2 : Cooling method Wire diameter Gas flow 210 A (DR: 200 A) 210 A (DR: 210 A) Gas cooling mm 12 l /min Technical specification according to IEC Connection Euro-Central connector Other connectors are available upon request. Torch rating will be reduced when using pulsed-arc power sources. Contact tips Tip holder 10 ECu, x P 1073* CuCrZr, x P 3073* Alu, ECu, x P 1073* 20 for contact tip 342P ECu, x P 1069* CuCrZr, x P 3069* Alu, ECu, x P 1069* = Standard equipment * At the blank, please insert suitable information for torch length or wire diameter, e.g. 3 for 3 m or 08 for 0.8 mm. Ordering information for torches Supplied equipped for steel wire Ø 1.0 mm Liner, red (Ø mm). TBi 240 Adapter nut brass 3 m 112P m 112P m 112P TBi 240 DR changeable swivel neck (adapter nut brass ) 3 m 112P34133D 4 m 112P34134D 5 m 112P34135D Description 50 Torch neck TBi 240, P Torch neck TBi 240 DR (swivel), P PVC body 600P Support for DR necks 600P PVC body 600P Handle blue, aircooled, cpl. kit 380P Cross recessed screw M 3.5x14 100P Trigger, red, 2 poles 385P

9 TBi 240 DR TBi 240 M10x M10x1 71 Gas diffusor Gas nozzle 30 rubber, red long life thermoset, black, very robust ceramic, white, extremely heat resistant thermoset HD, brown extremely heat resistant 112P P P P conical, NW 12.5 mm 40 conical, NW 12.5 mm, Heavy Duty 41 conical, NW 10 mm 345P P P cylindrical, NW 17 mm 345P cylindrical, NW 17 mm Heavy Duty 345P spot welding nozzle, NW 17 mm L = 68 mm 345P Description 70 Coaxial cable TBi ProFlex M 361P0M11_0* 71 Hex nut M10x1 101P Spring support small, black 600P Cable support cpl. (2 pieces) 701P Adaptor nut (brass) 701P Central adaptor ESG cpl., 2 poles, moveable pins 701P Sleeve nut M10x1 701P O-ring 4.0x1.0 mm (gas nipple) 365P Slotted screw M4x6 100P Description 80 Cable lug, flat 375P Insulated connector, male, round 375P Insulated connector, female, round 375P

10 Classic. TBi 250 (FX, DR) Technical Data Rating at 60% duty cycle (10 min. cycle) - Mixed gas: - CO 2 : Cooling method Wire diameter Gas flow 200 A 230 A Gas cooling mm 10 l /min Technical specification according to IEC Connection Euro-Central connector Other connectors are available upon request. Torch rating will be reduced when using pulsed-arc power sources. Contact tips Tip holders 10 ECu, x P 1069* CuCrZr, x P 3069* Alu, ECu, x P 1069* 20 for contact tip 342P ECu, x P 1262* CuCrZr, x P 3262* Alu, ECu, x P 1262* 21 for contact tip 342P = Standard equipment * At the blank, please insert suitable information for torch length or wire diameter, e.g. 3 for 3 m or 08 for 0.8 mm. Ordering information for torches Supplied equipped for steel wire Ø 1.0 mm. Liner, red (Ø mm). TBi 250 Adapter nut basic 3 m 104P m 104P m 104P TBi 250 Adapter nut brass 3 m 104P939A30 4 m 104P939A40 5 m 104P939A50 TBi 250 FX TBi 250 DR flexible neck (adapter nut brass ) changeable swivel neck (adapter nut basic ) 3 m 104P34133F 4 m 104P34134F 5 m 104P34135F 3 m 104P34133D 4 m 104P34134D 5 m 104P34135D Description 50 Torch neck TBi 250, P Torch neck TBi 250 DR (swivel), P Torch neck TBi 250 FX (flexible) 104P Nozzle spring TBi 250/252/ P Nozzle support TBi 250 DR 103P Head insulator TBi 250 DR 103P Head insulator TBi 250 FX 104P Hex brass body M10x1 600P Support for DR necks 600P PVC body 600P Handle blue, aircooled, cpl. kit 380P Cross recessed screw M 3.5x14 100P Trigger, red, 2 poles 385P

11 TBi 250 FX TBi 250 DR TBi 250 M10x M10x1 71 Gas nozzle 40 conical, NW 15 mm L = 56.8 mm 345P bottle form, NW 14 mm L = 56.2 mm 345P conical, NW 15 mm long insulation L = 56.8 mm 41 conical, NW 11 mm only for L = 56.2 mm 42 cylindrical, NW 20 mm long insulation L = 56.2 mm 345P P P bottle form, NW 11 mm 345P only for L = 56.2 mm 44 spot welding nozzle 345P NW 19 mm, long insulation L= 66.7 mm Description 70 Coaxial cable TBi ProFlex M 361P0M11_0* 71 Hex nut M10x1 101P Spring support small, black 600P Cable support cpl. (2 pieces) 701P Adaptor nut (basic version) 701P Adaptor nut (brass) 701P Central adaptor ESG cpl., 2 poles, moveable pins 701P Sleeve nut M10x1 701P O-ring 4.0x1.0 mm (gas nipple) 365P Slotted screw M4x6 100P Description 80 Cable lug, flat 375P Insulated connector, male, round 375P Insulated connector, female, round 375P

12 Classic. TBi 260 Technical Data Rating at 60% duty cycle (10 min. cycle) - Mixed gas: - CO 2 : Cooling method Wire diameter Gas flow 230 A 250 A Gas cooling mm 12 l /min Technical specification according to IEC Connection Euro-Central connector Other connectors are available upon request. Torch rating will be reduced when using pulsed-arc power sources. Contact tips Tip holders 10 ECu, x P 1069* CuCrZr, x P 3069* Alu, ECu, x P 1069* 20 for contact tip 342P for contact tip, 3 mm longer version 342P ECu, x P 1262* CuCrZr, x P 3262* Alu, ECu, x P 1262* 21 for contact tip 342P = Standard equipment * At the blank, please insert suitable information for torch length or wire diameter, e.g. 3 for 3 m or 08 for 0.8 mm. Ordering information for torches Supplied equipped for steel wire Ø 1.0 mm Liner, red (Ø mm). TBi 260 Adapter nut brass 3 m 118P m 118P m 118P Description 50 Torch neck TBi 260, P PVC body 600P Handle blue, aircooled, cpl. kit 380P Cross recessed screw M 3.5x14 100P Trigger, red, 2 poles 385P

13 M10x1 70 TBi M10x1 71 Gas diffusor Gas nozzle 30 thermoset, black, very robust thermoset HD, brown extremely heat resistant 118P P conical, NW 16 mm L = 75.5 mm 41 conical, NW 14 mm L = 75.5 mm 345P P conical, NW 12 mm only for L = 75.5 mm 345P cylindrical, NW 20 mm L = 75.5 mm 345P spot welding nozzle NW 20 mm L = 85 mm 345P Description 70 Coaxial cable TBi ProFlex ML 361PML11_0* 71 Hex nut M10x1 101P Spring support small, black 600P Cable support cpl. (2 pieces) 701P Adaptor nut (brass) 701P Central adaptor ESG cpl., 2 poles, moveable pins 701P Sleeve nut M10x1 701P O-ring 4.0x1.0 mm (gas nipple) 365P Slotted screw M4x6 100P Description 80 Cable lug, flat 375P Insulated connector, male, round 375P Insulated connector, female, round 375P

14 Classic. TBi 360 (DR) Technical Data Rating at 60% duty cycle (10 min. cycle) - Mixed gas: - CO 2 : Cooling method Wire diameter Gas flow 300 A (DR: 280 A) 330 A (DR: 310 A) Gas cooling mm 12 l /min Technical specification according to IEC Connection Euro-Central connector Other connectors are available upon request. Torch rating will be reduced when using pulsed-arc power sources. Contact tips Tip holders 10 ECu, x P 1069* CuCrZr, x P 3069* Alu, ECu, x P 1069* 20 for contact tip 342P for contact tip, 4 mm longer version 342P ECu, x P 1262* CuCrZr, x P 3262* Alu, ECu, x P 1262* 21 for contact tip 342P for contact tip, 6 mm longer version 342P = Standard equipment * At the blank, please insert suitable information for torch length or wire diameter, e.g. 3 for 3 m or 08 for 0.8 mm. Ordering information for torches Supplied equipped for steel wire Ø 1.2 mm. Liner, red (Ø mm). TBi 360 Adapter nut brass 3 m 114P m 114P m 114P TBi 360 DR changeable swivel neck (adapter nut brass ) 3 m 114P34133D 4 m 114P34134D 5 m 114P34135D Description 50 Torch neck TBi 360, P Torch neck TBi 360 DR (swivel), P PVC body 600P Support for DR necks 600P PVC body 600P Handle blue, aircooled, cpl. kit 380P Cross recessed screw M 3.5x14 100P Trigger, red, 2 poles 385P

15 TBi 360 DR TBi 360 M10x M10x1 71 Gas diffusor Gas nozzle 30 thermoset, black, very robust ceramic, white, extremely heat resistant thermoset HD, brown extremely heat resistant 114P P P conical, NW 16 mm L = 83.5 mm 41 conical, NW 12 mm only for L = 83.5 mm 42 cylindrical, NW 20 mm L = 83.5 mm 345P P P spot welding nozzle NW 20 mm L = 90 mm 345P Description 70 Coaxial cable TBi ProFlex L 361P0L11_0* 71 Hex nut M10x1 101P Spring support small, black 600P Cable support cpl. (2 pieces) 701P Adaptor nut (brass) 701P Central adaptor ESG cpl., 2 poles, moveable pins 701P Sleeve nut M10x1 701P O-ring 4.0x1.0 mm (gas nipple) 365P Slotted screw M4x6 100P Description 80 Cable lug, flat 375P Insulated connector, male, round 375P Insulated connector, female, round 375P

16 Classic. TBi 380 Technical Data Rating at 60% duty cycle (10 min. cycle) - Mixed gas: - CO 2 : Cooling method Wire diameter Gas flow 360 A 380 A Gas cooling mm 14 l /min Technical specification according to IEC Connection Euro-Central connector Other connectors are available upon request. Torch rating will be reduced when using pulsed-arc power sources. Contact tips Tip holders 10 ECu, x P 1262* CuCrZr, x P 3262* Alu, ECu, x P 1262* 20 for contact tip 342P ECu, x P 1069* CuCrZr, x P 3069* Alu, ECu, x P 1069* = Standard equipment * At the blank, please insert suitable information for torch length or wire diameter, e.g. 3 for 3 m or 08 for 0.8 mm. Ordering information for torches Supplied equipped for steel wire Ø 1.2 mm. Liner, red (Ø mm). TBi 380 Adapter nut brass 3 m 917P m 917P m 917P Description 50 Torch neck TBi 380, P Insulating washer 130P PVC body 600P Handle blue, aircooled, cpl. kit 380P Cross recessed screw M 3.5x14 100P Trigger, red, 2 poles 385P

17 TBi 380 M10x Option M10x1 71 Gas diffusor Gas nozzle 30 thermoset, black, very robust ceramic, white, extremely heat resistant 130P P conical, NW 16 mm L = 75.5 mm 41 conical, NW 16 mm Heavy Duty L = 75.5 mm 345P P Nozzle insulator ( optional ) 42 conical, NW 14 mm L = 75.5 mm 345P glass-fiber, white, only with 41! 346P conical, NW 12 mm only for L = 75.5 mm 345P cylindrical, NW 20 mm L = 75.5 mm 345P spot welding nozzle NW 20 mm L = 85 mm 345P Description 70 Coaxial cable TBi ProFlex XL 361PXL11_0* 71 Hex nut M10x1 101P Spring support small, black 600P Cable support cpl. (2 pieces) 701P Adaptor nut (brass) 701P Central adaptor ESG cpl., 2 poles, moveable pins 701P Sleeve nut M10x1 701P O-ring 4.0x1.0 mm (gas nipple) 365P Slotted screw M4x6 100P Description 80 Cable lug, flat 375P Insulated connector, male, round 375P Insulated connector, female, round 375P

18 Classic. TBi 241 Technical Data Rating at 100% duty cycle (10 min. cycle) - Mixed gas: - CO 2 : Cooling method Wire diameter Gas flow 270 A 300 A Water cooling mm 14 l /min Technical specification according to IEC Connection Euro-Central connector Other connectors are available upon request. Torch rating will be reduced when using pulsed-arc power sources. Contact tips Tip holder 10 ECu, x P 1073* CuCrZr, x P 3073* Alu, ECu, x P 1073* 20 for contact tip 342P ECu, x P 1069* CuCrZr, x P 3069* Alu, ECu, x P 1069* = Standard equipment * At the blank, please insert suitable information for torch length or wire diameter, e.g. 3 for 3 m or 08 for 0.8 mm. Ordering information for torches Supplied equipped for steel wire Ø 1.0 mm. Liner, not insulated (Ø mm) TBi 241 Adapter nut brass 3 m 123P m 123P m 123P Description 50 Torch neck TBi 241, P Handle blue, watercooled, cpl. kit 380P Cross recessed screw M 3.5x14 100P Trigger, red, 2 poles 385P Cable assembly Classic, 2-C 122P4045_0* 71 Fabric outer cover 25x1.5 mm, cpl. 307P2528_A* 72 Water-power cable Classic, blue, 2-C 316P1621_0* 73 PVC hose, braided, black, 5x1.5 mm 302P PVC-Gas hose, black 4.5x1.5 mm 302P Control cable x.30 m cpl. 301P2304_0* 77 Wire conduit yellow Classic 356P0401_0* 18

19 TBi x Gas diffusor Gas nozzle 30 rubber, red long life thermoset, black, very robust ceramic, white, extremely heat resistant thermoset HD, brown extremely heat resistant 112P P P P conical, NW 12.5 mm 40 conical, NW 12.5 mm, Heavy Duty 41 conical, NW 10 mm 345P P P cylindrical, NW 17 mm 345P cylindrical, NW 17 mm Heavy Duty 345P spot welding nozzle, NW 17 mm L = 68 mm 345P Description 80 Cable support complete, water cooled 700P Clamping ring for outer cover 600P Adaptor nut Expert (brass) 700P Central adaptor ESW cpl., 2 poles, moveable pins 701P Sleeve nut M10x1 701P O-ring 4.0x1.0 mm (gas nipple) 365P Cap for adaptor nut 700P Screw M 4 x 6 100P Grommet 700P Description 90 Quick connector 701P Hose clamp with ring Ø P Hose clamp with ring Ø P Hose clamp with ring Ø P Cable lug, flat 375P Insulated connector, male, round 375P Insulated connector, female, round 375P

20 Classic. TBi 351 Technical Data Rating at 100% duty cycle (10 min. cycle) - Mixed gas: - CO 2 : Cooling method Wire diameter Gas flow 270 A 300 A Water cooling mm 14 l /min Technical specification according to IEC Connection Euro-Central connector Other connectors are available upon request. Torch rating will be reduced when using pulsed-arc power sources. Contact tips Tip holders 10 ECu, x P 1069* CuCrZr, x P 3069* Alu, ECu, x P 1069* 20 for contact tip 342P ECu, x P 1262* CuCrZr, x P 3262* Alu, ECu, x P 1262* 21 for contact tip 342P = Standard equipment * At the blank, please insert suitable information for torch length or wire diameter, e.g. 3 for 3 m or 08 for 0.8 mm. Ordering information for torches Supplied equipped for steel wire Ø 1.0 mm. Liner, not insulated (Ø mm) TBi 351 Adapter nut brass 3 m 122P m 122P m 122P Description 50 Torch neck TBi 351, P Nozzle spring TBi 250/252/ P Handle blue, watercooled, cpl. kit 380P Cross recessed screw M 3.5x14 100P Trigger, red, 2 poles 385P Cable assembly Classic, 2-C 122P4045_0* 71 Fabric outer cover 25x1.5 mm, cpl. 307P2528_A* 72 Water-power cable Classic, blue, 2-C 316P1621_0* 73 PVC hose, braided, black, 5x1.5 mm 302P PVC-Gas hose, black 4.5x1.5 mm 302P Control cable x.30 m cpl. 301P2304_0* 77 Wire conduit yellow Classic 356P0401_0* 20

21 TBi x1 94 Gas nozzle 40 conical, NW 15 mm L = 56.8 mm 345P bottle form, NW 14 mm L = 56.2 mm 345P conical, NW 15 mm long insulation L = 56.8 mm 41 conical, NW 11 mm only for L = 56.2 mm 42 cylindrical, NW 20 mm long insulation L = 56.2 mm 345P P P bottle form, NW 11 mm 345P only for L = 56.2 mm 44 spot welding nozzle 345P NW 19 mm, long insulation L= 66.7 mm Description 80 Cable support complete, water cooled 700P Clamping ring for outer cover 600P Adaptor nut Expert (brass) 700P Central adaptor ESW cpl., 2 poles, moveable pins 701P Sleeve nut M10x1 701P O-ring 4.0x1.0 mm (gas nipple) 365P Cap for adaptor nut 700P Screw M 4 x 6 100P Grommet 700P Description 90 Quick connector 701P Hose clamp with ring Ø P Hose clamp with ring Ø P Hose clamp with ring Ø P Cable lug, flat 375P Insulated connector, male, round 375P Insulated connector, female, round 375P

22 Classic. TBi 411 / 511 Technical Data Rating at 100% duty cycle (10 min. cycle) - Mixed gas: - CO 2 : Cooling method Wire diameter Gas flow TBi 411: 350 A, TBi 511: 450 A TBi 411: 400 A, TBi 511: 500 A Water cooling mm 14 l /min Technical specification according to IEC Connection Euro-Central connector Other connectors are available upon request. Torch rating will be reduced when using pulsed-arc power sources. Contact tips Tip holders 10 ECu, x P 1262* CuCrZr, x P 3262* Alu, ECu, x P 1262* 20 for contact tip 342P for contact tip, 4 mm longer version 342P ECu, x P 1069* CuCrZr, x P 3069* Alu, ECu, x P 1069* 21 for contact tip 342P for contact tip, 4 mm longer version 342P = Standard equipment * At the blank, please insert suitable information for torch length or wire diameter, e.g. 3 for 3 m or 08 for 0.8 mm. Ordering information for torches Supplied equipped for steel wire Ø 1.0 mm. Liner, not insulated (Ø mm) TBi 411 Adapter nut brass 3 m 133P m 133P m 133P TBi 511 Adapter nut brass 3 m 134P m 134P m 134P Description 50 Torch neck TBi 411, P Torch neck TBi 511, P Insulating washer 130P Handle blue, watercooled, cpl. kit 380P Cross recessed screw M 3.5x14 100P Trigger, red, 2 poles 385P Cable assembly Classic, 2-C 122P4045_0* 71 Fabric outer cover 25x1.5 mm, cpl. 307P2528_A* 72 Water-power cable Classic, blue, 2-C 316P1621_0* 73 PVC hose, braided, black, 5x1.5 mm 302P PVC-Gas hose, black 4.5x1.5 mm 302P

23 TBi 411 TBi x Gas diffusor Gas nozzle 30 thermoset, black, very robust ceramic, white, extremely heat resistant thermoset HD, brown extremely heat resistant 130P P P conical, NW 16 mm L = 75.5 mm 41 conical, NW 16 mm Heavy Duty L = 75.5 mm 42 conical, NW 14 mm L = 75.5 mm 345P P P conical, NW 12 mm only for L = 75.5 mm 345P cylindrical, NW 20 mm L = 75.5 mm 345P spot welding nozzle NW 20 mm L = 85 mm 345P Description 76 Control cable x.30 m cpl. 301P2304_0* 77 Wire conduit yellow Classic 356P0401_0* 80 Cable support complete, water cooled 700P Clamping ring for outer cover 600P Adaptor nut Expert (brass) 700P Central adaptor ESW cpl., 2 poles, moveable pins 701P Sleeve nut M10x1 701P O-ring 4.0x1.0 mm (gas nipple) 365P Cap for adaptor nut 700P Screw M 4 x 6 100P Grommet 700P Description 90 Quick connector 701P Hose clamp with ring Ø P Hose clamp with ring Ø P Hose clamp with ring Ø P Cable lug, flat 375P Insulated connector, male, round 375P Insulated connector, female, round 375P

24 Overview. Wire guides gas cooled torches water cooled torches for wire color for steel wire insulated liners white 324P1338_4* blue 324P1545_4* red 324P2045_4* yellow 324P2545_4* not insulated liners not insul. 322P2045_4* not insul. 322P2545_4* for stainless steel wire not insulated liners not insul. 321P2250_ not insul. 321P3550_4 gas cooled torches water cooled torches for wire color for aluminum and stainless steel wire PA liners anthracite 328P2040_5* anthracite 328P2347_5* PTFE liners blue 326P1540_5* red 326P2040_5* yellow 326P2747_5* Carbon-PTFE liners black 327P1540_5* CeraGlide with steel tip black 327P2040_5* black 327P2747_5* bordeaux 326P2040_K* bordeaux 326P2347_K* gas cooled torches water cooled torches for wire color for aluminum recommended optional PA liners with bronze liner PTFE liners with bronze liner CeraGlide with bronze liner anthracite 328P2040_A* anthracite 328P2347_A* 0.8 blue 326P1540_A* 1.0 red 326P2040_A* yellow 326P2747_A* 1.0 bordeaux 326P2040_H* bordeaux 326P2347_H* * At the blank, please insert suitable information for torch length, e.g. 3, 4 or 5 for 3 m, 4 m or 5 m long torches. 24

25 Overview. Remote Control Modules FM1 Double action switch (Up / Down) Module FM1 complete Control cable 3-pole with front connector, 6.5 m Module FM1 complete, for connection to Fronius Control cable 7-pole with front connector, 6.5 m Rubber cover FM1 600P PFM P PFM P FM2 Two double action switches (Up / Down) Module FM2 complete Control cable 7-pole with front connector, 6.5 m Rubber cover FM2 600P PFM P FM3 4-way pushbutton Module FM3 complete Control cable 7-pole with front connector, 6.5 m Rubber cover FM3 600P PFM P FM4 Spin-wheel poti 10kΩ Module FM4 complete 600P FM5 Double action switch (Up / Down) with potentiometer 10kΩ Module FM5 complete Control cable 7-pole with front connector, 6.5 m Rubber cover FM5 600P PFM P FM7 7-segment Display with Double action switch (Up / Down) Module FM7 complete Rubber cover FM7 600P P All remote control modules are equipped with 7- or 12-pole connectors. Custom built modules and bus-systems available on request. 25

26 Overview. MIG / MAG Accessories TBi ArcVisor Plus The TBi ArcVisorPlus Welding Helmet provides the technical characteristics of a premium product as well as an attractive design. The large viewing area and various possibilities of adjustment guarantee ergonomic working conditions for the professional welder. Due to the exceptionally high quality optical filter with classification 1/1/1/1 and its 4 sensors the helmet is destined for MIG/MAG, TIG and Plasma welding. The helmet can also be used for light grinding work. - Filter quality classification 1/1/1/1 - Viewing area 98 x 55 mm PU 12 TBi ArcVisor Plus, DIN P Welding glove MIG / MAG Welding glove from dyed cow split leather, protection according to EN12477 Type A. High comfort due to moisture absorbing inner lining and flexible thumb. Reinforced inner palm with double stitched seam. A length of 38 cm provides optimum protection for hand and wrist. PU 12 Welding glove MIG / MAG 714P TBi Anti-spatter spray Classic The TBi anti-spatter spray Classic effectively prevents adhesion of welding spatter on the nozzle and the work piece. Apply regularly to the torch head to increase the lifetime of consumables and facilitate cleaning of the torch. - Excellent anti-stick properties - Free of silicone and water - Temperature resistant up to 180 C - Suitable for later surface treatment of the work piece PU 12 TBi anti-spatter spray Classic (400 ml) 392P TBi CoolingFluid Pro Cooling fluid with corrosion inhibitors for recirculating water coolers, optimized for welding applications. The cooling fluid must not be diluted or mixed with other fluids. - Anti-freeze protection to -15 C - High flash point > 65 C for increased safety PU 1 TBi CoolingFluid Pro (10 kg) 392P

27

28 Ready for Tomorrow All rights reserved. Subject to change without notice. Excerpts and reprints not permitted. Nr. DOKP111002, 04/ Ruhberg 14 D Fernwald-Steinbach P.O. Box 67 D Fernwald-Steinbach Tel Fax Internet: info@tbi-industries.com