Knob handles Doorknobs Knobs & backplates

Size: px

Start display at page:

Download "Knob handles Doorknobs Knobs & backplates"

Gwen Webster
5 years ago
Views:

1 Knob handles Doorknobs Knobs & backplates

2 Overview Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page FSB Manual 2012

3 Page Page Page Page Page Page Page Page

4 Technical information Knobs/Types of fixing Doorknobs on roses Invisible through fixing (06) There are two types of fixing for doorknobs permanently attached to roses: through fixing and invisible face fixing. Prepared for M5 screws with protruding threaded lugs 38 mm apart. The rose used on the other side of the door also has a knob attached but with unthreaded M5 lugs: FSB or FSB The M5 screws are 45 mm long and are suitable for doors from mm thick. For other door thicknesses, screws with a length varying in steps of 10 mm must be used (FSB ), see page 632 too. When installing like this an FSB solid half spindle / (see page 626) must be fitted to the knob by screwing it into the knob s M12 thread (13 mm spanner), to allow a rotating connection to the opposing doorknob. The FSB solid half spindle must be ordered separately. Doorknobs on roses Invisible face fixing (05) For the invisible face fixing of a doorknob, a steel subassembly must first be screwed to the door. The doorknob is then put on the subassembly s 8 mm pin and is fixed in place with a grub screw. Care must be taken that the subassembly is correctly positioned when fixing it, so that the grub screw can enter the slot on the pin (see the adjacent illustration). The knob is correctly fitted when the outer end of the grub screw is flush with the surface of the neck. 260 FSB Manual 2012

5 Combined knob & backplates Invisible through fixing Visible face fixing For combined knob & backplates, FSB supplies the doorknobs permanently fixed to the backplates. All FSB combined knob & backplates have an M12 thread to accommodate the supplied FSB solid half spindle. Before installing the combined knob & backplate, screw the FSB solid half spindle / (see page 626) firmly into the neck of the knob (13 mm spanner). Only then install the backplate and spindle onto the door and then continue with the installation on the other side of the door. Knob handles Can be freely combined with roses and backplates with visible and invisible screw fixings FSB makes and delivers knob handles with holes to accommodate separate spindles. Pairs of knob handles are then installed with an FSB solid spindle (see page 628). When installing, the FSB solid spindle is first fixed to one of the knob handles by screwing in the special grub screw supplied into the hole intended for that purpose. This has generally only been done correctly when the head of the grub screw is level with the surface of the knob s neck. The other fitting then corresponds to the rules for the FSB solid spindle, see page 624. Of course you can also combine knob handles with suitable FSB half spindles so that they only turn on the inside in backplates and roses, with a fixed knob or combined knob & backplate outside. 261

Knob handles 08 0802 08 0803 Aluminium Stainless steel Bronze Brass X = 70 mm X = 66 mm X = 65 mm X = 65 mm 8 + 10* mm hole 50 60 X 76

6 Knob handles Aluminium Stainless steel Bronze Brass X = 70 mm X = 66 mm X = 65 mm X = 65 mm * mm hole X mm hole fsb.de/ fsb.de/ fsb.de/ * 10 mm not in brass or bronze 262 FSB Manual 2012

7 Knob handles Design: Hartmut Weise (R) (L) 8 mm hole Aluminium: 8 mm hole Stainless steel: mm hole fsb.de/ fsb.de/

8 Knob handles Aluminium Stainless steel Bronze Ø = 50 mm Ø = mm Ø = 50 mm mm* hole Ø Design: Jasper Morrison 8 mm hole fsb.de/ fsb.de/ * 10 mm not in bronze 264 FSB Manual 2012

9 Knob handles mm hole fsb.de/

Doorknobs 23 0802 23 0802 00005 (face fixing) 23 0802 00006 (through

72 mm X = 72 mm X 50 X 50 23 0803 23 0803 00005 (face fixing) 23 0803

10 Doorknobs (face fixing) (through fixing) Aluminium Stainless steel Brass Bronze X = 77 mm X = 73 mm X = 72 mm X = 72 mm X 50 X (face fixing) (through fixing) fsb.de/ fsb.de/ FSB Manual 2012

Doorknobs 23 0804 23 0804 00005 (face fixing) 23 0804 00006 (through fixing) 81 81 48 48 38 77 77 23 0811 23 0811 00025 (face fixing) 23

11 Doorknobs (face fixing) (through fixing) (face fixing) (through fixing) In aluminium, only available in natural anodised finish (FSB 0105) fsb.de/ fsb.de/

Doorknobs 23 0826 Design: Hartmut Weise 23 0826 00435 (R) 23 0826

fixing 86 86 38 70 70 23 0828 23 0828 00005 (face fixing) 23 0828

12 Doorknobs Design: Hartmut Weise (R) (L) face fixing (R) (L) through fixing (face fixing) ( through fixing) fsb.de/ fsb.de/ FSB Manual 2012

Doorknobs 23 0829 23 0829 00005 (face fixing) 23 0829 00006 (through fixing) Aluminium Stainless steel Bronze Ø = 50 mm Ø = mm Ø = 50 mm 52

13 Doorknobs (face fixing) (through fixing) Aluminium Stainless steel Bronze Ø = 50 mm Ø = mm Ø = 50 mm 52 Ø 52 Ø Design: Jasper Morrison (face fixing) (through fixing) fsb.de/ fsb.de/

Doorknobs 23 0880 Design: Christoph Mäckler 23 0880 00035 (face fixing)

14 Doorknobs Design: Christoph Mäckler (face fixing) (through fixing) fsb.de/ FSB Manual 2012

Doorknobs 23 0833 Design: Hans Kollhoff 23 0833 00026 (through fixing) 67,5 50 38

large knob size, can also be used offset. 87 73 38 54 fsb.de/230833 fsb.

15 Doorknobs Design: Hans Kollhoff (through fixing) 67, Design: Hadi Teherani (through fixing) Owing to the large knob size, can also be used offset fsb.de/ fsb.de/ Both doorknobs in aluminium only avail able in natural anodised finish (FSB 0105) 271

Doorknobs 23 0809 23 0809 00006 (through fixing) 93 50 38 23 0812 23 0812 00026 (through fixing) In aluminium

16 Doorknobs (through fixing) (through fixing) In aluminium only available in natural anodised finish (FSB 0105) fsb.de/ fsb.de/ FSB Manual 2012

Doorknobs 23 0846 23 0846 00006 (through fixing) 93 50 38 91 23 0854

17 Doorknobs (through fixing) (through fixing) fsb.de/ fsb.de/

Combined knob & backplates 19 1923 19 1964 19 1923 000 (visible fixing) 19 1964 003 (invisible fixing) Spacing 72 mm Aluminium Stainless steel Bronze Brass X = 77 mm X = 73 mm X = 72 mm X = 72 mm For

18 Combined knob & backplates (visible fixing) (invisible fixing) Spacing 72 mm Aluminium Stainless steel Bronze Brass X = 77 mm X = 73 mm X = 72 mm X = 72 mm For drilling template see page X X 50 21, (visible fixing)* (invisible fixing) Spacing 72, mm Aluminium Stainless steel Bronze* Brass* X = 77 mm X = 73 mm X = 72 mm X = 72 mm For drilling template see page 644 * not in bronze or brass 45 X 45 X ,5 134,5 21, fsb.de/ fsb.de/ fsb.de/ Keyholes LL PC CH-RZ 274 FSB Manual 2012

Combined knob & backplates 19 1966 19 1963 19 1966 000 (visible fixing) 19 1963 003 (invisible fixing) Spacing 72 mm For drilling template see page 643 45 51 45 51 40 170 72 22 50 185 72 112 21,5 19

19 Combined knob & backplates (visible fixing) (invisible fixing) Spacing 72 mm For drilling template see page , (visible fixing)* (invisible fixing) Spacing 72, mm For drilling template see page 644 * not in bronze ,5 134,5 21, fsb.de/ fsb.de/ fsb.de/ Keyholes LL PC CH-RZ 275

Door knobs Knob backplates

Door knobs Knob backplates 4c Overview Technical information Knob handles Door knobs Knob backplates Pull handles on backplates 168 170 171 175 184 189 167 Overview 0802 Pages 171, 54, 272 0804 Page 171