Sliding Door Fittings, Roller Shutters Folding Sliding Door Fittings

Size: px

Start display at page:

Download "Sliding Door Fittings, Roller Shutters Folding Sliding Door Fittings"

Winifred Cain
5 years ago
Views:

Silent Fold 20/A, door weight up to 20 kg Area of application: For folding doors mounted to the carcase on one side, without running and guide track, for opening and closing the folding doors without

1 Silent Fold 20/A, door weight up to 20 kg Area of application: For folding doors mounted to the carcase on one side, without running and guide track, for opening and closing the folding doors without blocking Folding door stop: With concealed hinges and opening angles of or 165 Door width: Max. 300 mm, perform stop test with wider doors Installation: For screwing into 32 mm series drilled holes, control arm can be mounted on the left or right Application Installation Both doors must have the same width 1 Door 2 Doors Stop with concealed hinges and opening angles of or 165 Corner cabinet with 2 doors, stop with concealed hinges with opening angle of 165 Corner mounting: The butting edges of the doors are mitred at 45. The doors can be opened independently, if desired. Mount control arm to door Mark a using the control arm with the door closed Mark b using the control arm with the door fully open Fit mounting plate so that the control arm pivot point is at intersection c With control arm : Attach control arm to mounting plate and secure with cap nut With control arm 165 : Screw on control arm with mounting plate FF.4

2 Control arm , lateral mounting with concealed hinges and opening angles of Cap nut Bearing Folding door stop: Concealed hinges with opening angles of Installation depth: Min. 320 mm Control arm Supplied with 1 Control arm with door bearing made of nickel plated steel Mounting plate 1 Plastic mounting plate Door bearing 1 Plastic bearing 1 Plastic cap nut Length mm Cat. No Packing: 1 or 50 pcs. Fitting to door x = Door overlay Control arm 170, lateral mounting with concealed hinges and opening angle of 170 Mounting plate Folding door stop: Concealed hinges with opening angle of 170 Installation depth: Min. 330 mm Press-in Sleeve Door bearing Control arm Supplied with 1 Nickel plated steel control arm 1 Nickel plated steel mounting plate 1 Screw for mounting plate 1 Nickel plated door bearing 1 Plastic press fit dowel Ø10 x 13 mm Fitting to door Screw Please order separately: Concealed hinges, rolled hinges, folding door handle and adapter for fitting handles to folding doors. Length mm Cat. No Packing: 1 or 50 pcs. FF.5

3 Fold 20 VF 4T, door weight up to 10 kg Door height: Max. 1,000 mm Door width: Max. 500 mm Door thicknesses: Max. 20 mm Running gear: Top running, 2 rollers Version: Attached at the side Fitted door leaves can be combined to door leaf pairs using detachable panel to panel hinges with removable pin One-man installation possible even with large door leaves For door heights up tp 1,000 mm Installation Running track dimension Door offset FF.6

4 Set Cat.No. Complete fitting set for 2 pairs of doors without running track Packing: 1 set Set consisting of: Material Finish For 1 pair of doors Cat. No. Running gear, left, top running, 2 rollers, Steel Burnished 1 pc friction bearing mounted, incl. screws Running gear, right, top running, 2 rollers, friction bearing mounted, incl. screws Steel Burnished 1 pc Concealed hinge, with 1 screw hole, for Ø35 mm cup drilling Zinc alloy Nickel plated 2 pcs Panel to panel hinge, can be detached, with removable steel pin Zinc alloy Nickel plated 4 pcs Packing: 20 pcs. Please order running track and additional components separately. Running track Material Finish Length mm Cat. No. Running track, not drilled Aluminium Bright 5, Packing: 20 pcs. Additional components Material Finish Cat. No. Panel to panel hinge, cranked, Steel Galvanized with fixed steel pin Packing: 20 pcs. FF.7

Fold 40 MF/VF flex, door weight up to 40 kg Area of application: For folding sliding doors that are free sliding or mounted to the cabinet on one side with concealed hinges Door height: Max.

5 Fold 40 MF/VF flex, door weight up to 40 kg Area of application: For folding sliding doors that are free sliding or mounted to the cabinet on one side with concealed hinges Door height: Max. 2,500 mm Door width: Max. 500 mm Door thickness: mm Vertical door gap width: 1 4 mm Height adjustment: ±2 mm at running gear using screw Running gear: 3 rollers, with plastic coated ball bearing mounted rollers Easy height adjustment using adjusting screw Installation option 1: Mounted to one side of cabinet Installation option 2: Free sliding Installation option 3: Several pairs of doors connected, free sliding or mounted to one side of cabinet When mounting doors dimensions specified observed accordingly.! Outer runner " Centre runner Illustration shows installed free sliding doors Illustration shows mounted to one side of cabinet Dimensions for centre runner " FF.

6 Set consisting of: Material Finish Cat. No. Top running gear, end door Steel Nickel plated Top running gear, centredoor Steel Nickel plated Bottom guide, end door Steel Nickel plated Bottom guide, centre door Steel Nickel plated Panel to panel hinge Zinc alloy Nickel plated Hinge connection, centre Steel Nickel plated Packing: 1 pc. Mounted to 1 side of cabinet Free sliding 2-leaf 3-leaf 4-leaf 5-leaf 6-leaf 1 pair of doors 2 pairs of doors 3 pairs of doors Top running gear, end door 1 pc. 1 pc. 1 pc. 2 pcs. 2 pcs. 2 pcs. Top running gear, centredoor 1 pc. 1 pc. 2 pcs. 2 pcs. 1 pc. 2 pcs. Bottom guide, end door 1 pc. 1 pc. 1 pc. 2 pcs. 2 pcs. 2 pcs. Bottom guide, centre door 1 pc. 1 pc. 2 pcs. 2 pcs. 1 pc. 2 pcs. Panel to panel hinge 3 pcs. 3 pcs. 6 pcs. 6 pcs. 9 pcs. 3 pcs. 6 pcs. 9 pcs. Hinge connection, centre 1 pc. 1 pc. 2 pcs. 2 pcs. 1 pc. 2 pcs. Order required door configuration individually according to "Supplied with" table. Please order running and guide tracks separately. Tracks Material Finish Length mm Cat. No. Single top running track, for screw fixing Aluminium Bright 2, , Bottom guide track, for screw fixing Aluminium Bright 2, , FF.9

Fold 40 MF/VF 1T, door weight up to 40 kg Area of application: Folding sliding doors mounted to cabinet on one side with concealed hinges Door height: Max. 2,500 mm Door width: Max.

7 Fold 40 MF/VF 1T, door weight up to 40 kg Area of application: Folding sliding doors mounted to cabinet on one side with concealed hinges Door height: Max. 2,500 mm Door width: Max. 500 mm Glass thickness: 4 mm Vertical door gap width: 2 mm Height adjustment: ±2 mm on running gear using screw Running gear: 3 rollers, with plastic coated, ball bearing mounted rollers Easy height adjustment using adjusting screw Installation dimension Installation Required number of concealed hinges GH (glass height) = frame height mm FF.90

8 For 1 pair of doors Material Finish Packing Cat. No. A Top running gear, 1 pc. Steel Nickel plated 1 pc B Bottom guide 1 pc. Steel Nickel plated 1 pc C Panel to panel hinge Depending on door height Steel Nickel plated 1 pc D Frame mounting angle, small pcs. Steel Galvanized pcs E Frame mounting angle, large pcs. Steel Galvanized pcs F Buffer 4 pcs. Plastic Black 4 pcs Please order hinge, mounting plate and securing bracket to prevent cabinet from tipping separately. FF.91

9 G 1st top and bottom insert for door overlay 25 mm G 2nd top and bottom insert for door overlay 20 mm G 3rd top and bottom insert for door overlay 15 mm I 1st insert for bottom only, for door overlay 25 mm I 2nd insert for bottom only, for door overlay 25 mm I 3rd insert for bottom only, for door overlay 25 mm For 1 pair of doors Material Finish Packing Cat. No. 3 pcs. Plastic Grey 3 pcs pcs. Plastic Grey 3 pcs pcs. Plastic Grey 3 pcs pc. Plastic Grey 1 pc pc. Plastic Grey 1 pc pc. Plastic Grey 1 pc H Insert, centre Depending on door height Plastic Grey 2 pcs J Set of fixing screws for attaching fittings to aluminium frame 1 set 1 set Please select parts number G and I that complies your requeirements. FF.92

10 Material Finish Packing Cat. No. Top running track, for screw fixing Aluminium Bright 2,000 mm ,000 mm Bottom guide track, for screw fixing Aluminium 2,000 mm Aluminium frame profile, for screw fixing with frame mounting angle 3,000 mm Aluminium Silver coloured anodized 2,500 mm ,500 mm Bar profile, for subdividing doors Aluminium Silver coloured anodized 2,500 mm ,500 mm Traverse profile, for fixing the bar profile Aluminium Silver coloured anodized 2,500 mm Traverse profile, for fixing the bar profile Steel Galvanized 2 pcs. 3,500 mm Glass retaining profile for stabilisation and as clatter prevention for the inserted panel of glass Plastic Transparent 3,000 mm Please order securing bracket to prevent cabinet from tipping FF.93

Hinges and Flap Fittings Furniture Hinges

Hinges and Flap Fittings Furniture Hinges Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502