Concealed hinges. Premium hinge systems for cabinet doors. blum.com

Transcription

1 Concealed hinges Premium hinge systems for cabinet doors blum.com

2 Quick reference Simple planning and ordering lum offers many on-line tools to help you with your kitchen planning and ordering. Planning tools allow the selection of components based on your cabinet construction and size. Additional components can be selected as needed. Once complete, they provide an easy-to-follow order form. inge planning tools lum has downloadable Excel spreadsheets that help determine the hinge that is right for your application. Planning tools are easily accessible on our website at blum.com/planning inge cup centerpoint C = cup centerpoint /16" 27/32" 7/8" 15/16" 31/32" 1" = oring distance inges per door Cabinet height " 80" 60" 40" 20" door Ø35 45 inges required per door <15 lb his chart can serve as a guide for determining the number of hinges per door. Note that door weight can also determine the number of hinges required. NOE: he distance between the top and bottom hinges must be greater than the width of the door inge abbreviation key Ø lb W C lb S lb mm Conversion chart inch 1 1 / / / / / / / / / / / / / / / / / / / / / For more information on Concealed hinges please refer to our website at Or simply scan the quick reference code below 66.5 R OL P / / / / /16.8 = oring distance = Plate height OL = Door / /8.875 P = Door protrusion R = Reveal S = Side arm protrusion / / = Door thickness W = Side panel width FD = Fixed distance / Fixed distance (FD) he distance that the cup s the cabinet side panel when a hinge is attached to a 0 mm mounting plate. his is used to calculate hinge with the formula X + minus = OL (Fixed distance + boring distance minus plate height = )

3 Elegant design, superior function Silent and effortless, that s how cabinet doors close with lum hinges regardless of the weight or closing speed. CLIP top LUMOION hinges have the soft close mechanism integrated in the hinge cup, and continues to provide the quality of motion you have come to expect from lum.

4 Contents Concealed hinges 5 Product overview 7 CLIP testing standards 8 General specifications - CLIP 12 inge program overview CLIP top LUMOION 20 CLIP top 41 CLIP 43 Angled hinges 55 CLIP accessories 57 CLIP mounting plates 61 LUMOION for doors 69 IP-ON for doors 75 COMPAC testing standards 76 General specifications - COMPAC 78 COMPAC LUMOION 83 COMPAC 90 COMPAC accessories 91 Machines 95 Assembly aids 101 Part number index

5 inges Product overview CLIP top LUMOION LUMOION is integrated in the hinge cup so additional assembly processes are no longer necessary after adjustment is complete. CLIP top Like other CLIP hinges, CLIP top enables easy three-dimensional adjustment with lum s spiral tech depth adjustment. CLIP he tried and tested CLIP mechanism offers simple, tool-free hinge assembly. he industry standard for tool-free attachment since 85. Angled hinges Angled hinges provide a tremendous array of possibilities for the professional cabinet designer. Specifically designed for panel constructed (frameless) cabinets, the system accommodates cabinet front angles from -45 to +45, in 5 increments. CLIP accessories lum offers a wide range of accessories from spacers to restriction clips that support a variety of applications. A selection of customizable cover caps enables the customer to enhance and personalize each hinge. CLIP mounting plates CLIP top LUMOION works with all current CLIP mounting plates so you can start using this new hinge right away with little change to production lum, Inc. Subject to technical modifications without notice

6 inges LUMOION for doors LUMOION add-on upgrade option available for CLIP top, CLIP and COMPAC hinges. Easy to install and offers the same quality of motion as LUMOION hinges. IP-ON for doors Designed for panel or face frame (blocked out) cabinet applications. Works with CLIP top LUMOION, CLIP top and CLIP free swing and self close hinges. Ideal for handleless cabinets, doors can be opened easily with IP-ON a light touch is all that's needed. COMPAC LUMOION COMPAC LUMOION hinges have the soft closing mechanism integrated directly in the hinge cup. hey are available for most face frame applications or door styles and are interchangeable with current COMPAC hinges so no need to change existing setups or workflows. COMPAC accessories lum's COMPAC hinges program has proven itself as the high quality solution for face frame cabinets for over 30 years and continue to provide the quality of motion you have come to expect from lum hardware. Assembly aids lum assembly aids support the assembly of all lum products. hey have proven to be the very best aids when it comes to day-to-day assembly. heir combination of high precision and practical benefits is valued both in workshops and directly on-site with the customer. Machines and accessories he wide range of drilling and insertion machines on offer from lum ensures just the right solution no matter what the assembly requirement. Quick setup and easy operation ensure efficient assembly and a highquality end result. Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 6

7 inges CLIP testing standards Conditions for tests lum, Inc. does a great deal of testing to ensure that the quality of our hardware is consistent with the usual high standards that our customers have come to expect from lum. For this reason we have rigorous testing procedures which are carried out from the development stage through production. lum s internal testing standards are based on practical applications of our products and are more stringent than what is required by ANSI/MA. NOE: All lum hinges meet or exceed ANSI/MA A grade 2 requirements. All concealed hinges are designed for indoor use. Cycle test Specifications Door size 23-5/8" height, 23-5/8" width, 3/4" thickness Door weight 14.3 lb for cycle tests Door weight 18.5 lb for load and over push tests oring distance 5 mm Distance between hinges 16-15/16" inge and mounting plate attachment inges are mounted to test blocks and attached to test door and stand with clamps est blocks for door: Particle board est blocks for mounting plate: Particle board Cycle test Without load 200,000 opening and closing cycles for all CLIP hinges With load 11 lb extra weight is applied for 100,000 opening and closing cycles kg Positive test result Positive test result Load test Static load 67 lb applied ten times for five seconds, each at 45 opening angle Dynamic load 44 lb extra weight applied for fifty opening and closing cycles kg Positive test result Positive test result Over push test Without load CLIP hinges Increasing forces up to 11 lb applied for a total of five times for a total of five seconds each Positive test result lum, Inc. Subject to technical modifications without notice

8 General specifications inges lum three-point contact CLIP top LUMOION, CLIP top and CLIP hinges have three-point contact between the hinge and mounting plate to keep them firmly connected under heavy usage. Side adjustment lum s side adjustment is a flush screw head that allows 4 mm of adjustment. It also has an integral stop that prevents removal. Spiral tech depth adjustment With lum s spiral tech depth adjustment just one and three quarter revolutions of the screw creates 5 mm of adjustment without loosening and retightening a fixing screw. Wide variety of mounting plates lum has mounting plates for every application from wing plates with pre-attached screws or dowels and cam height adjustable face frame adapters, to sleek in-line mounting plates. Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 8

9 inges General specifications inge-to-door attachment Screw-on Use #6 wood screws Press-in Pre-attached Ø8 dowels installed with lum knock-in tool or MINIPRESS with an insertion ram EXPANDO Pre-attached expanding Ø8 mm dowels INSERA ool-free attachment with INSERA expanding Ø8 mm dowels Mounting plate-to-cabinet Screw-on EXPANDO Pre-attached expanding Ø5 mm dowels INSERA ool-free attachment with INSERA expanding Ø5 mm dowels lum, Inc. Subject to technical modifications without notice

10 Adjustments inges hree-dimensional adjustment Side adjustment Rotate front screw to increase or decrease door (±2 mm) eight adjustment Rotate cam screw on mounting plate to adjust door position (±2 mm) Depth adjustment Rotate rear spiral tech cam screw to adjust door gap (+3 mm, -2 mm) NOE: On non-cam mounting plates, loosen screws, adjust door and retighten screws LUMOION deactivation Deactivation switch on hinge cup For small or light doors, the LUMOION can be deactivated on one of the hinges Door must be closed once for the deactivation to be complete. o reactivate, move switch back to original position. 1 2 emperature information CLIP top LUMOION is designed to be used at temperatures between 65 and 85 F. Lower or higher temperatures will not cause damage to the hinge, however they will affect the closing speed. Once the temperature returns to the suggested range the hinge will return to its optimal closing action. Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 10

11 inges Using the brochure lum's Concealed hinges brochure makes it easy to use our Euro hinges. Each page shows information for both face frame and panel applications. he top row shows the hinge in a face frame cabinet and the center row shows it in a panel cabinet. he bottom holds the /reveal tables and hinge part numbers. inges CLIP top LUMOION 110 Minimum reveal o determine the minimum reveal, use the table in the upper right hand corner of each page. Face frame construction o use Euro hinges in a face frame cabinet, use the top row. Overlay Frame Features LUMOION integrated into the hinge cup Deactivation switch for small/light doors For door thicknesses up to 26 (1") Overload safety feature 86 angle restriction clip available (703553) Compatible with existing CLIP mounting plates and hinge arm cover caps Partial/twin Frame Minimum reveal table = boring = door thickness distance hickness greater than 26 trial recommended Inset Frame = min. Panel construction o use Euro hinges in a panel cabinet, use the center row. Panel W Panel NOE: Application requires a half-cranked hinge and mounting plate Panel = W reveal Overlay and reveal tables o determine the and reveals, use the tables at the bottom of each column. Overlay P S reveal Overlay P S Reveal P S reveal Select hinge Select the appropriate hinge from the bottom of each column. Screw-on, press-in, EXPANDO and INSERA are available for most hinges Fixed distance = boring distance = 11 NOE: 4.5 plate is only for use in frame cabinets, 9 plate is only for panel cabinets Fixed distance = boring distance = 1.5 Reveal W P S = boring distance Fixed distance: 0 = -7 = boring distance 9 = 1.5 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width Straight-arm Self close alf-cranked Self close Full-cranked Self close Screw-on Screw-on Screw-on 7150 Press-in Press-in Press-in 7180 INSERA INSERA INSERA 7190 EXPANDO 71358E Step-by-step the following example is based on a panel cabinet with an Step 1 Determine cabinet construction Face frame Panel Step 2 Determine the or reveal Overlay Partial/twin Inset reveal reveal Step 3 Find boring distance and mounting plate height ased on your use the Overlay P S table to determine the mounting plate height and boring distance needed = = 6 = fixed distance = boring distance = 11 NOE: 4.5 plate is only for use in face frame cabinets, 9 plate is only for panel cabinets Step 4 Check minimum reveal table All minimum reveal tables are Minimum reveal table based on square edge door with a 1 mm radius. A larger radius or profile door will change the minimum reveal required = rad (1/32 ") boring rial application recommended distance = door thickness minimum reveal lum, Inc. Subject to technical modifications without notice

12 inge program overview inges CLIP top LUMOION Page Angled Page 110 CLIP top LUMOION and CLIP top thick door diagonal inset blind corner blind corner narrow aluminum CLIP accessories Page Cover caps 55 Angle restriction clips 56 Mounting plates 57 LUMOION for doors 61 IP-ON for doors 69 CLIP top Page thick door special applications zero protrusion special applications zero protrusion special applications inset blind corner blind corner aluminum for LUMOION aluminum diagonal mini glass door bi-fold 40 COMPAC LUMOION Page 38N for partial 78 39C for full 79 38C for full for face mount 81 Accessories 82 COMPAC Page 38N for partial 84 39C for full 85 38C for full LUMOION for COMPAC 89 Accessories 90 Machines and assembly aids Page Machines 91 Machine accessories 92 Assembly aids 95 CLIP Page Part number index Page Part numbers 101 Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 12

13 inges CLIP top LUMOION 110 Features LUMOION integrated into the hinge cup Deactivation switch for small/light doors For door thicknesses up to 26 (1") Overload safety feature 86 angle restriction clip available (703553) Compatible with existing CLIP mounting plates and hinge arm cover caps Minimum reveal table = boring distance = door thickness hickness greater than 26 trial recommended Overlay Partial/twin Inset Frame Frame Frame = min. Panel W Panel NOE: Application requires a half-cranked hinge and mounting plate Panel = W reveal reveal reveal Overlay P S Fixed distance = boring distance = 11 NOE: 4.5 plate is only for use in frame cabinets, 9 plate is only for panel cabinets Overlay P S Fixed distance = boring distance = 1.5 Reveal W P S = boring distance Reveal P S Fixed distance: 0 = -7 = boring distance 9 = 1.5 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width Straight-arm Self close alf-cranked Self close Full-cranked Self close Screw-on Screw-on Screw-on 7150 Press-in INSERA Press-in INSERA Press-in INSERA EXPANDO 71358E 2016 lum, Inc. Subject to technical modifications without notice

14 CLIP top LUMOION inges Features LUMOION integrated into the hinge cup Deactivation switch for small/light doors For door thicknesses up to 26 (1") Overload safety feature For door s up to 22 mm 86 angle restriction clip available (703553) Compatible with existing CLIP mounting plates and hinge arm cover caps Minimum reveal table = boring distance = door thickness hickness greater than 26 trial recommended Overlay Frame Partial/twin Frame W uilding both frame and panel cabinets Frame hinge (7335XX) plate ( ) 4.5 (1/2") same boring distance Panel W Panel W Panel reveal hinge (7335XX) plate (any 0 mm plate) (11/16") Overlay P S Fixed distance = boring distance = NOE: 4.5 plate is only for use in frame cabinets, 9 plate is only for panel cabinets Overlay P S Fixed distance = boring distance = Reveal W P S = boring distance 29 he most common s for frame and panel cabinets can be achieved by using the same machine setting for hinge cup boring. ore all doors at 4.5 mm to achieve: (1/2") on frame cabinets 17.5 (11/16") on panel cabinets Advantages: One machine setting for boring all doors Same hinge used for both applications Straight-arm Self close Straight-arm Self close Abbreviations Screw-on Screw-on = Plate height Press-in INSERA Press-in INSERA P = Door protrusion S = Side arm protrusion EXPANDO 73358E EXPANDO 73358E W = Side panel width Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 14

15 inges CLIP top LUMOION 95 thick door Features LUMOION integrated into the hinge cup Deactivation switch for small/light doors For door thicknesses up to 30 (1-3/16") Overload safety feature Compatible with existing CLIP mounting plates and hinge arm cover caps Minimum reveal table = boring distance = door thickness hickness greater than 30 trial recommended Overlay Frame Partial/twin Frame Inset Frame = 9 Panel 66 W Panel 66 W NOE: Application requires a half-cranked hinge and mounting plate Panel 67.5 = 0 14 min. reveal reveal reveal Overlay P S Fixed distance = boring distance = 11 NOE: 4.5 plate is only for use in frame cabinets, 9 plate is only for panel cabinets Overlay P S Fixed distance = boring distance = 1.5 Reveal W P S = boring distance Reveal P S Fixed distance: = boring distance 0 = -7 9 = 1.5 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width Straight-arm Self close alf-cranked Self close Full-cranked Self close Screw-on Screw-on Screw-on Press-in INSERA Press-in INSERA Press-in INSERA lum, Inc. Subject to technical modifications without notice

16 CLIP top LUMOION 110 diagonal 45 inges 110 Features LUMOION integrated into the hinge cup Deactivation switch for small/light doors For door thicknesses up to (3/4") Overload safety feature Compatible with existing CLIP mounting plates and hinge arm cover caps hickness greater than trial recommended Overlay application Inside corner Calculating door width 45 mitered panel straight side panel Step 1. Using the boring distance () determined in the reveal table, cross-reference to find the side gap distance (Y) in the table below. Step 2. Using the following formula to find the door width. Door width = interior width minus (Y x 2). reveal Example: interior width = 400 mm, side gap (Y) = 4.5 mm. 391 = 400 minus (4.5 x 2) Y reveal 1.5 Y interior width door width reveal Overlay = boring distance Reveal = boring distance NOE: Reveal based on (3/4") side panel Y = side gap = boring distance NOE: Calculations based on (3/4") door thickness Diagonal 45 hinge Self close Diagonal 45 hinge Self close Abbreviations INSERA INSERA = Plate height Y = Side gap Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 16

17 inges CLIP top LUMOION 95 inset blind corner 95 Features LUMOION integrated into the hinge cup Deactivation switch for small/light doors For door thicknesses up to 24 (15/16") Overload safety feature oring distance range 3 mm to 7 mm Compatible with existing CLIP mounting plates and hinge arm cover caps Minimum reveal table = boring distance = door thickness hickness greater than 24 trial recommended Flush door applications Offset door applications Adjustments and clearance adjust gap adjust reveal reveal reveal ack of door is flush with stationary panel Stationary panel spaced out thickness of door bumper 70 min Stationary panel mounted to cabinet side, top and bottom 70 min /-2 gap +/-2.5 reveal S reveal reveal P Reveal P S = boring distance Reveal P S = boring distance Abbreviations = Plate height P = Door protrusion S = Side arm protrusion Inset blind corner Self close Inset blind corner Self close Screw-on Screw-on Press-in INSERA Press-in INSERA lum, Inc. Subject to technical modifications without notice

18 CLIP top LUMOION 95 blind corner inges 95 Features LUMOION integrated into the hinge cup Deactivation switch for small/light doors For door thicknesses up to 24 (15/16") Overload safety feature oring distance range 3 mm to 7 mm Compatible with existing CLIP mounting plates and hinge arm cover caps Minimum reveal table = boring distance = door thickness hickness greater than 24 trial recommended Overlay application Adjustments and clearances adjust gap adjust 86 minimum D 92 setback gap FP S +/-2 gap +/-2.5 stationary panel FP P NOE: Door gap can be adjusted ± 2 mm Setback Overlay P D Fixed distance = boring distance = 9 NOE: Door varies depending on the setback position of the mounting plate. Use the table to select the desired and cross-reference to the plate setback and boring distance. Gap S FP = front panel thickness NOE: Door gap varies depending on the thickness of the stationary panel and the height of the mounting plate. Use the table to cross-reference the plate height based on the front panel thickness and door gap. Abbreviations D = Depth FP = Front panel thickness = Plate height P = Door protrusion S = Side arm protrusion Overlay blind corner Press-in Self close Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 18

19 inges CLIP top LUMOION 95 narrow aluminum door 95 Features LUMOION integrated into the hinge cup Deactivation switch for small/light doors For door thicknesses up to 22 (7/8") Overload safety feature Compatible with existing CLIP mounting plates and hinge arm cover caps Minimum reveal table Door frame width = door thickness hickness greater than 22 trial recommended Overlay Partial/twin Installation Frame Panel W Attach cup adapter to the hinge and insert into machined openings door frame width door frame width Attach using aluminum screws provided with hinges ( ) Panel Panel W W Aluminum door preparation door frame width door frame width reveal R Overlay P S = fixed NOE: 4.5 plate is only for use in frame cabinets, 9 plate is only for panel cabinets Straight-arm Screw-on Self close 71950A Overlay P S = fixed Reveal W P S = fixed Straight-arm Self close Screw-on 71950A R2 R17.6 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width min 2016 lum, Inc. Subject to technical modifications without notice

20 CLIP top 107 inges Features hree-dimensional adjustment Available with INSERA attachment For door thicknesses up to 22 (7/8") 86 angle restriction clip available ( ) All metal hinge, nickel-plated Add-on LUMOION soft close available Minimum reveal table = boring distance = door thickness hickness greater than 22 trial recommended Overlay Frame Panel W Overlay P S Fixed distance = boring distance = 11 Straight-arm Screw-on Self close Abbreviations = Plate height NOE: 4.5 plate is only for use in face frame cabinets, 9 plate is only for panel cabinets Press-in INSERA P = Door protrusion S = Side arm protrusion W = Side panel width Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 20

21 inges CLIP top 110 Features hree-dimensional adjustment Available with INSERA attachment INSERA lever expands in Ø8 mm holes For door thicknesses up to 26 (1") 86 angle restriction clip available (703553) All metal hinge, nickel plated Add-on LUMOION soft close available Minimum reveal table = boring distance = door thickness hickness greater than 26 trial recommended Overlay Frame Partial/twin Frame Inset Frame = min. Panel Panel W NOE: Application requires a half-cranked hinge and mounting plate Panel 66.5 W = 0 reveal reveal reveal Overlay P S Fixed distance = boring distance = 11 NOE: 4.5 plate is only for use in frame cabinets, 9 plate is only for panel cabinets Overlay P S Fixed distance = boring distance = 1.5 Reveal W P S = boring distance Reveal P S Fixed distance: 0 = -7 = boring distance 9 = 1.5 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width Straight-arm Self close Free swing Screw-on L Press-in L INSERA L EXPANDO 71358E alf-cranked Self close Free swing Screw-on L Press-in INSERA L Full-cranked Self close Free swing Screw-on L Press-in 7180 INSERA lum, Inc. Subject to technical modifications without notice

22 CLIP top inges Features For larger s (22 mm maximum) hree-dimensional adjustment Available with INSERA attachment INSERA lever expands in Ø8 mm holes For door thicknesses up to 26 (1") 86 angle restriction clip available (703553) All metal hinge, nickel plated Add-on LUMOION soft close available Minimum reveal table = boring distance = door thickness hickness greater than 26 trial recommended Overlay Partial/twin uilding both frame and panel cabinets Frame Panel W Frame hinge (7335XX) plate ( ) 4.5 (1/2") same boring distance Panel W Panel W Panel reveal hinge (7335XX) plate (any 0 mm plate) (11/16") Overlay P S Fixed distance = boring distance = NOE: 4.5 plate is only for use in frame cabinets, 9 plate is only for panel cabinets Overlay P S Fixed distance = boring distance = Reveal W P S = boring distance 29 he most common s for frame and panel cabinets can be achieved by using the same machine setting for hinge cup boring. ore all doors at 4.5 mm to achieve: (1/2") on frame cabinets 17.5 (11/16") on panel cabinets Advantages: One machine setting for boring all doors Same hinge used for both applications Straight-arm Self close Free swing Screw-on L Press-in L INSERA L EXPANDO 73358E Straight-arm Self close Free swing Screw-on L Press-in L INSERA L EXPANDO 73358E Abbreviations = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 22

23 inges CLIP top 120 Features hree-dimensional adjustment Available with INSERA attachment For door thicknesses up to 22 (7/8") All metal hinge, nickel-plated Add-on LUMOION soft close available Minimum reveal table = boring distance = door thickness hickness greater than 22 trial recommended Overlay Partial/twin Inset Frame Frame Frame Panel W Panel W NOE: Application requires a half-cranked hinge and mounting plate Panel W 14 min. reveal reveal reveal Overlay P S Fixed distance = boring distance = 11 NOE: 4.5 plate is only for use in face frame cabinets, 9 plate is only for panel cabinets Overlay P S Fixed distance = boring distance = 1.5 Reveal W P S = boring distance Reveal P S Fixed distance = boring distance = -7.5 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width Straight-arm Self close alf-cranked Self close alf-cranked Self close Screw-on Screw-on Screw-on Press-in Press-in Press-in INSERA INSERA INSERA EXPANDO 71558E lum, Inc. Subject to technical modifications without notice

24 CLIP top inges Features For larger s (21 mm maximum) hree-dimensional adjustment Available with INSERA attachment For door thicknesses up to 22 (7/8") All metal hinge, nickel-plated Add-on LUMOION soft close available Minimum reveal table = boring distance = door thickness hickness greater than 22 trial recommended Overlay Partial/twin uilding both frame and panel cabinets Frame Panel W Frame inge (7335XX) Plate ( ) 4.5 (1/2") same boring distance Panel W Panel W Panel reveal hinge (7335XX) plate (any 0 mm plate) (11/16") Overlay P S Fixed distance = boring distance = NOE: 4.5 plate is only for use in face frame cabinets, 9 plate is only for panel cabinets Overlay P S Fixed distance = boring distance = Reveal W P S = boring distance he most common s for frame and panel cabinets can be achieved by using the same machine setting for hinge cup boring. ore all doors at 4.5 mm to achieve: (1/2") on frame cabinets 17.5 (11/16") on panel cabinets Advantages: One machine setting for boring all doors Same hinge used for both applications Straight-arm Self close Straight-arm Self close Abbreviations Screw-on Screw-on = Plate height Press-in Press-in P = Door protrusion INSERA INSERA S = Side arm protrusion EXPANDO 73558E EXPANDO 73558E W = Side panel width Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 24

25 inges CLIP top 95 thick door Features hree-dimensional adjustment Available with INSERA attachment For door thicknesses up to 30 (1-3/16") All metal hinge, nickel-plated Add-on LUMOION soft close available Minimum reveal table = boring distance = door thickness hickness greater than 30 trial recommended Overlay Partial/twin Inset Frame Frame Frame = min. Panel 12.7 W Panel 12.7 W NOE: Application requires a half-cranked hinge and mounting plate Panel = 0 reveal reveal 12.7 reveal Overlay P S Fixed distance = boring distance = 11 NOE: 4.5 plate is only for use in frame cabinets, 9 plate is only for panel cabinets Overlay P S Fixed distance = boring distance = 1.5 Reveal W P S = boring distance Reveal P S Fixed distance: 0 = 7 = boring distance 9 = 1.5 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width Straight-arm Self close Free swing Screw-on L Press-in L INSERA alf-cranked Self close Free swing Screw-on L Press-in INSERA Full-cranked Self close Free swing Screw-on L Press-in INSERA lum, Inc. Subject to technical modifications without notice

26 CLIP top 170 inges Features hree-dimensional adjustment Available with INSERA attachment For door thicknesses up to 24 (15/16") 0 angle restriction clip available ( ) All metal hinge, nickel-plated Add-on LUMOION soft close available Minimum reveal table = boring distance = door thickness hickness greater than 24 trial recommended Overlay Partial/twin Inset Frame Frame Inset application not recommended with 170 hinges and the inset face frame adapter ( ) NOE: 1756xxx or 175L recommended Panel W Panel W Panel reveal 11 reveal Overlay P S Fixed distance = boring distance = 11 NOE: 4.5 plate is only for use in face frame cabinets, 9 plate is only for panel cabinets Overlay P S Fixed distance = boring distance = 1.5 Reveal W P S = boring distance Reveal P S Fixed distance = boring distance = -7.5 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width Straight-arm Self close Free swing Screw-on L Press-in INSERA L alf-cranked Self close Free swing Screw-on L Press-in INSERA alf-cranked Self close Free swing Screw-on L Press-in INSERA Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 26

27 inges CLIP top 170 special applications Straight-arm applications hick door application = 0 hick door twin application = 0 max. protrusion 65 straight-arm hinge straight-arm hinge Z = 5 = min. reveal 0 0 rial application recommended rial application recommended NOE: Inset application can also be achieved with either a straight-arm hinge with a 18 mm plate or half-cranked hinge with 9 mm plate. Setback of mounting plate would be 38.5 mm + door thickness. Z = gap = door thickness Minimum reveal table = door thickness alf-cranked applications Lip door application = 3 max. protrusion 74 Mitered corner door application = 3 max. protrusion half-cranked hinge half-cranked hinge = lip detail rial application recommended rial application recommended NOE: All 170 special applications can be achieved in face frame cabinets by blocking out behind the frame Angle restriction clip Reduces opening angle of the CLIP top 170 to 0 Installs quickly, easily and tool-free lack nylon Angle restriction clip LUMOION for 170 hinge X S LUMOION for 170 hinge inge X S CLIP top 170 straight-arm CLIP top 170 half-cranked A lum, Inc. Subject to technical modifications without notice

28 CLIP top 155 zero protrusion inges 155 Features For use in cabinets with interior roll-outs hree-dimensional adjustment Available with INSERA attachment For door thicknesses up to 24 (15/16") Angle restriction clips available All metal hinge, nickel-plated Add-on LUMOION soft close available Minimum reveal table = boring distance = door thickness hickness greater than 24 please see page 29 Overlay Door protrusion Frame At a 90 opening, using 0 mm plate, the door will have -2.3 mm protrusion regardless of boring distance. Use side adjustment to increase or decrease door protrusion NOE: Use of 0 mm or 3 mm is recommended for zero protrusion LUMOION for 155 hinges Panel W X S inge X S CLIP top 155 straight-arm CLIP top 155 half-cranked LUMOION for 155 hinge 973A inge cup dimensions 57 Overlay P S Fixed distance = boring distance = 11 Straight-arm Screw-on Press-in INSERA Self close N N N01 /47* *INSERA Angle restriction clips For use with 155 /125 zero protrusion hinges Gray nylon 110 restriction clip N 92 restriction clip N Abbreviations = Plate height P = Door protrusion S = Side arm protrusion = Door thickness W = Side panel width Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 28

29 20 inges CLIP top 155 straight-arm special applications 155 Maximum door thickness Maximum door = 0 = 0 34 max N N rial application recommended NOE: For thick door applications, you must bore at the specified boring distance listed in the chart below rial application recommended Minimum reveal = door thickness = boring distance *Minimum reveal is 1 mm on a 25 mm thick door when bored at 8 mm Mitered door with large = N Overlay = boring distance hin facing added to door = N reveal = 23 max NOE: Inset application can also be achieved with either a straight-arm hinge with a 18 mm plate or half-cranked hinge with 9 mm plate. Setback of mounting plate would be 38.5 mm + door thickness max 11.7 = = rial application recommended rial application recommended NOE: All 155 special applications can be achieved in face frame cabinets by blocking out behind the frame Straight-arm Self close Angle restriction clips Abbreviations Screw-on N For use with 155 /125 zero = Plate height Press-in N protrusion hinges Gray nylon INSERA N01 P = Door protrusion S = Side arm protrusion 110 restriction clip N 92 restriction clip N09 W = Side panel width lum, Inc. Subject to technical modifications without notice

30 CLIP top 155 half-cranked special applications inges 155 Lip door hick lip door = 3 = N max max = = 3 lip detail rial application recommended P =.2 rial application recommended wo-sided and four-sided mitered door LUMOION for 155 hinge = X S lip detail = inge X S CLIP top 155 straight-arm CLIP top 155 half-cranked P = 7.2 rial application recommended LUMOION for 155 hinge 973A7000 NOE: All 155 special applications can be achieved in face frame cabinets by blocking out behind the frame alf-cranked Self close Angle restriction clips Abbreviations Screw-on INSERA N N01 For use with 155 /125 zero protrusion hinges Gray nylon = Plate height P = Door protrusion 110 restriction clip N 92 restriction clip N09 S = Side arm protrusion W = Side panel width Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 30

31 inges CLIP top 125 zero protrusion for thicker doors 125 Features Zero protrusion hinge for thicker doors For use in cabinets with interior roll-outs hree-dimensional adjustment For door thicknesses up to 30 (1-3/16") 92 angle restriction clip available (707503N) All metal hinge, nickel-plated Add-on LUMOION soft close available Minimum reveal table = boring distance = door thickness hickness greater than 30 mm, see next page Overlay Door protrusion Frame At 90 opening, using 0 mm plate, the door will have -1.7 mm protrusion regardless of boring distance. Use side adjustment to increase or decrease door protrusion NOE: Use of 0 mm or 3 mm is recommended for zero protrusion inges per door Panel 72.5 W his chart can serve as a guide for determining the number of hinges per door. Note that door weight can also determine the number of hinges required for each door. NOE: he distance between the top and bottom hinges must be greater than the width of the door Cabinet height 100" 80" 60" 40" 20" inges required per door <15 lb lb lb lb 11.7 inge cup dimensions Cover cap Overlay P S 57 For use with zero protrusion hinges Steel, nickel-plated Custom logo available Cover cap Fixed distance = boring distance = 11 Abbreviations = Plate height Straight-arm Screw-on Press-in Self close D D 3.2 P = Door protrusion S = Side arm protrusion = Door thickness W = Side panel width lum, Inc. Subject to technical modifications without notice

32 CLIP top 125 special applications inges 125 Maximum door thickness = 0 Maximum door = 0 41 max N N 34 max NOE: hickness of 30 mm or greater, angle restriction clip required Overlay = boring distance NOE: Inset application can also be achieved with a straight-arm hinge with a 18 mm plate. Setback of mounting plate would be 38.5 mm + door thickness. NOE: Must use angle restriction clip to achieve application Overlay = boring distance Inset panel application Mitered door with large = 18 = R Reveal = boring distance For all special applications, a trial application is always recommended NOE: All 125 special applications can be achieved in face frame cabinets by blocking out behind the frame = 25.1 R1 R Angle restriction clip LUMOION for doors Protrusion dimensions X S = 30 max For use with zero protrusion hinges Gray nylon 92 restriction clip N For use with zero protrusion hinges Designed for one LUMOION per self closing hinge, however quantity may vary depending on door size and weight LUMOION for doors 973A7000 inge S = 63 LUMOION for doors X = 57 Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 32

33 inges CLIP top 95 inset blind corner 95 Features hree-dimensional adjustment Available with INSERA attachment For door thicknesses up to 24 (15/16") All metal hinge, nickel-plated Minimum reveal table = boring distance = door thickness hickness greater than 24 trial recommended Flush door applications Offset door applications Adjustments and clearances adjust gap adjust reveal reveal reveal ack of door is flush with stationary panel Stationary panel spaced out thickness of door bumper 70 min Stationary panel mounted to cabinet side, top and bottom 70 min S +/-2 gap +/-2.5 reveal reveal reveal P Reveal P S = boring distance Reveal P S = boring distance Inset blind corner Self close Inset blind corner Self close Abbreviations Screw-on Screw-on = Plate height Press-in Press-in P = Door protrusion INSERA INSERA S = Side arm protrusion lum, Inc. Subject to technical modifications without notice

34 CLIP top 95 blind corner inges 95 Features hree-dimensional adjustment Available with INSERA attachment For door thicknesses up to 24 (15/16") All metal hinge, nickel-plated Minimum reveal table = boring distance = door thickness hickness greater than 24 trial recommended Overlay application Adjustments and clearances adjust gap adjust setback 86 minimum D 92 gap S +/-2 gap +/-2.5 FP stationary panel P FP NOE: Door gap can be adjusted ± 2 mm Setback Overlay P D Fixed distance = boring distance = 9 NOE: Door varies depending on the setback position of the mounting plate. Use the table to select the desired and cross-reference to the plate setback and boring distance. Gap S FP = front panel thickness NOE: he door gap varies depending on the stationary panel thickness and the mounting plate height. Use the table to cross-reference the plate height based on the front panel thickness and door gap. Abbreviations D = Depth FP = Front panel thickness = Plate height P = Door protrusion S = Side arm protrusion Overlay blind corner INSERA Self close Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 34

35 inges CLIP top 120 aluminum door for LUMOION Features For use with LUMOION 973A hree-dimensional adjustment For door thicknesses up to 22 (7/8") All metal hinge, nickel-plated Minimum reveal table Door frame width = door thickness hickness greater than 22 trial recommended Overlay Frame Specifications 1.1 R Ø7 0.1 door frame width R4 Panel min. W Insert hinges into machined openings Attach with special screws provided with hinges ( ) door frame width Overlay P S Fixed boring distance NOE: 4.5 plate is only for use in face frame cabinets, 9 plate is only for panel cabinets Abbreviations = Plate height P = Door protrusion Straight-arm Screw-on Self close 73550A S = Side arm protrusion W = Side panel width lum, Inc. Subject to technical modifications without notice

36 CLIP top 120 aluminum door inges Features Not for use with LUMOION 973A hree-dimensional adjustment For door thicknesses up to 22 (7/8") All metal hinge, nickel-plated Minimum reveal table Door frame width = door thickness hickness greater than 22 trial recommended Overlay Frame Specifications R door frame width Panel W 1.5 Insert hinges into machined openings Attach with special screws provided with hinges ( ) Ø7 0.1 R min door frame width Overlay P S Fixed boring distance NOE: 4.5 plate is only for use in face frame cabinets, 9 plate is only for panel cabinets Straight-arm Self close Free swing Screw-on 73550A 72550A.L Abbreviations = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 36

37 inges CLIP top 110 diagonal Features hree-dimensional adjustment Available with INSERA attachment For door thicknesses up to (3/4") All metal hinge, nickel-plated hickness greater than trial recommended Overlay application Inside corner Calculating door width 45 mitered panel straight side panel Step 1. Using the boring distance () determined in the reveal table, cross-reference to find the side gap distance (Y) in the table below. Step 2. Using the following formula to find the door width. Door width = interior width minus (Y x 2). reveal Example: Interior width = 400 mm, side gap (Y) = 4.5 mm. 391 = 400 minus (4.5 x 2) reveal 1.5 Y interior width Y door width reveal Overlay = boring distance Reveal = boring distance NOE: Reveal based on (3/4") side panel Y = side gap = boring distance NOE: ased on (3/4") door thickness Diagonal 45 hinges Self close Diagonal 45 hinges Self close Abbreviations Screw-on Screw-on = Plate height Press-in Press-in Y = Side gap INSERA INSERA lum, Inc. Subject to technical modifications without notice

38 CLIP top 95 mini inges 95 Features For small doors or doors with small frames Side adjustment of +0.5 mm to -3.5 mm 26 mm drill bit required (1" cannot be used) hree-dimensional adjustment For door thicknesses up to 26 (1") All metal hinge, nickel-plated Ø26 Minimum reveal table = boring distance = door thickness 38 hickness greater than 26 trial recommended Overlay Partial/twin Inset Frame Frame Frame min Panel 12.5 W Panel 12.5 W NOE: his application uses a half-cranked hinge and mounting plate Panel 12.5 reveal W reveal 12.5 reveal Overlay P S Fixed distance = boring distance = 10 NOE: 4.5 plate is only for use in face frame cabinets, 9 plate is only for panel cabinets Overlay P S Fixed distance = boring distance =.5 Reveal W P S = boring distance Reveal P S Fixed distance = boring distance = -8 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion = Door thickness W = Side panel width Straight-arm Self close alf-cranked Self close Full-cranked Self close Screw-on Screw-on Screw-on Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 38

39 inges CLIP top 95 glass door 95 Features For glass thickness of 4.5 mm to 7 mm Side adjustment of +0.5 mm to -3.5 mm hree-dimensional adjustment Fixing screws included ( ) 26 mm drill bit required (1" cannot be used) Minimum reveal table = boring distance = door thickness hickness greater than 7 trial recommended Overlay Partial/twin Inset Panel W Panel 24 Panel 32 W Door thickness amount includes glass + height of cover cap reveal Cover caps for door front oring pattern D-shape cap Required on door front D-shape available in polished chrome Round available in black and polished chrome 5.5 to to 7 Round cap Ø to 7 D-shape cover cap Round cover cap Overlay P S Fixed distance = boring distance = 10 NOE: 4.5 plate is only for use in frame cabinets, 9 plate is only for panel cabinets Reveal W P S Fixed distance = boring distance =.5 Reveal P S Fixed distance = boring distance = -8 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion = Door thickness W = Side panel width Straight-arm Self close alf-cranked Self close Full-cranked Self close Screw-on Screw-on Screw-on lum, Inc. Subject to technical modifications without notice

40 CLIP top 60 bi-fold inges 60 Features Spiral tech side adjustment for door gap Spiral tech depth adjustment for in/out Four-dimensional adjustment All metal hinge, nickel-plated Inside corner application With flat panel doors Use with 155 or 170 hinge on adjacent door With profile doors Frame adapter plate Calculating door sizes he doors for a CLIP top bi-fold application can be of equal or unequal width. o calculate the door width (DW) of each door follow the step-by-step below. Step 1. Add the interior width to the side panel width (W) Step 2. Subtract door thickness () and reveal (R) Step 3. Subtract gap (G) and bumper thickness behind adjacent door Formula: DW = (IW + W) minus minus R minus G Example: DW = (500 + ) DW = 496 mm IW W G DW R IW DW Adjustment General specifications he spiral tech cam adjustment of the CLIP top bi-fold hinge allows +4/-7 mm adjustment = 0 18 W G R Abbreviations DW = Door width G = Gap = Plate height i-fold hinges Self close mm bore IW = Interior width R = Reveal Screw-on = Door thickness Press-in W = Side panel width Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 40

41 inges CLIP 107 Features hree-dimensional adjustment For door thicknesses up to 22 (7/8") 86 angle restriction clip available ( ) All metal hinge, nickel-plated Add-on LUMOION soft close available Minimum reveal table = boring distance = door thickness hickness greater than 22 trial recommended Overlay Frame Panel W Overlay P S Fixed distance = boring distance = 11 NOE: 4.5 plate is only for use in face frame cabinets, 9 plate is only for panel cabinets Straight-arm Press-in Self close 75M1580 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion = Door thickness W = Side panel width lum, Inc. Subject to technical modifications without notice

42 CLIP 100 inges Features hree-dimensional adjustment Available with INSERA attachment For door thicknesses up to 24 (15/16") All metal hinge, nickel-plated Add-on LUMOION soft close available Minimum reveal table = boring distance = door thickness hickness greater than 24 trial recommended Overlay Partial/twin Inset Frame Frame Frame Panel W Panel W NOE: his application uses a half-cranked hinge and mounting plate Panel 14 min. reveal reveal reveal Overlay P S Fixed distance = boring distance = 11 NOE: 4.5 plate is only for use in face frame cabinets, 9 plate is only for panel cabinets Overlay P S Fixed distance = boring distance = 1.5 Reveal W P S = boring distance Reveal P S Fixed distance = boring distance = -7 Abbreviations = Plate height P = Door protrusion S = Side arm protrusion = Door thickness W = Side panel width Straight-arm Self close Free swing Screw-on 71M M2550.L Press-in 71M M2580.L INSERA 71M2590 alf-cranked Self close Free swing Screw-on 71M M2650.L Press-in 71M2680 INSERA 71M2690 Full-cranked Self close Free swing Screw-on 71M M2750.L Press-in 71M M2780.L INSERA 71M2790 Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 42

43 Angled hinges from +45 to -45 Angled hinges provide a tremendous array of possibilities for the professional cabinet designer. Specifically designed for panel constructed (frameless) cabinets, the system accommodates cabinet front angles from -45 to +45, in 5 increments. his is achieved by combining any of ten angled hinges, or three standard hinges with a wedge spacer and any of five standard CLIP mounting plates. All CLIP top hinges feature "spiral tech" depth adjustment which eliminates loosening and retightening the adjustment screws. When the doors are ready to be attached to the cabinet, the time-proven CLIP mechanism connects the hinge arm to the mounting plate, again without tools. All components are nickelplated and have self-closing action, eliminating the need for additional hardware. Step 1. St ep 2. Step 3. On page 47, the angle-to-style cross-reference provides an overview of all the angled hinge applications available to assist with your specific application. Once the cabinet front angle is determined, select the row for that angle from the first column. here are five different possibilities for positive angles and two for negative angles. Cross-reference the angle to the style to find the hinge/ plate/wedge combination and the specification number. Specifications on pages 48 to 54 are in numerical order and show all the details.

44 Angled hinges CLIP top LUMOION and CLIP top inges Positive angle hinges NOE: CLIP top LUMOION CLIP top II* III* A A II* 79A III* 79A9496 Angled hinges +45 I* II* III* I* 79A II* III* 79A9498 *hese angled hinges are marked I, II, or III on the hinge arm for differentiation (see photo) Negative angle hinges A A A5490 Standard thick door hinges used in angled applications 95 straight-arm half-cranked full-cranked straight-arm half-cranked full-cranked Angled spacer wedges for positive and negative angled hinges 2 mm thickness 4 mm thickness 5 mm thickness 7 mm thickness A A A A5070 Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 44

45 inges Angled cabinet configurations Match desired configuration to angle-to-style cross-reference chart on page 47 equal equal lum, Inc. Subject to technical modifications without notice

46 Angled cabinet configurations inges Match desired configuration to angle-to-style cross-reference chart on page Angled hinges Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 46

47 inges Angle-to-style cross-reference Application number hinge CLIP top LUMOION Part number hinge CLIP top Part number plate Mounting plate Part number wedge/spacer May or may not be required Part number NOE: All 35 mm and 8 mm holes must be a minimum of mm deep wedge plate hinge front angle Positive angles Negative angles Maximum Partial Corner merge Inset door Mitered corner Maximum Inset door A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A lum, Inc. Subject to technical modifications without notice

48 1 Maximum specifications inges Positive angle applications NOE: CLIP top LUMOION CLIP top inge Mounting plate Wedge A A5010 minimum 20 minimum =5 OL= inge Mounting plate Wedge A A A =5 OL= inge Mounting plate Wedge A =5 OL=16 Angled hinges minimum 25 minimum =5 OL=16 inge Mounting plate Wedge A A A5070 inge Mounting plate Wedge A A A5500 inge Mounting plate Wedge A minimum 25 minimum =5 OL= =5 OL= =5 OL=16 40 =5 OL=16 45 =5 OL= inge Mounting plate Wedge A A A5070 inge Mounting plate Wedge A A A5500 inge Mounting plate Wedge A Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 48

49 inges Partial specifications Positive angle applications NOE: CLIP top LUMOION CLIP top minimum minimum =5 OL=15.5 =5 OL=16 =5 OL=16 inge Mounting plate Wedge A A5010 inge Mounting plate Wedge A A A5500 inge Mounting plate Wedge A minimum =5 OL= =5 OL= =5 OL=8 inge Mounting plate Wedge A inge Mounting plate Wedge A A A5010 inge Mounting plate Wedge A minimum minimum =5 OL= =5 OL= =5 OL=3 inge Mounting plate Wedge A A A5010 inge Mounting plate Wedge A A A5500 inge Mounting plate Wedge lum, Inc. Subject to technical modifications without notice

50 Corner merge specifications inges Positive angle applications NOE: CLIP top LUMOION CLIP top minimum minimum minimum =5 inge Mounting plate Wedge A A =5 inge Mounting plate Wedge A A A =5 inge Mounting plate Wedge A A A5500 Angled hinges minimum =5 25 =5 30 = inge Mounting plate Wedge A inge Mounting plate Wedge A A A5500 inge Mounting plate Wedge A minimum =5 35 = inge Mounting plate Wedge A A A5070 inge Mounting plate Wedge A Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 50

51 inges Inset door specifications Positive angle applications NOE: CLIP top LUMOION CLIP top minimum 20 minimum minimum R=1 56 R= = =5 inge Mounting plate Wedge A A5010 inge Mounting plate Wedge A A A5500 inge Mounting plate Wedge A A A R= R= = R=1 R=1 20 =5 25 =5 30 = inge Mounting plate Wedge A inge Mounting plate Wedge A inge Mounting plate Wedge A minimum 25 minimum R=1 =5 40 R=1 =5 45 R=2 = inge Mounting plate Wedge A A A5010 inge Mounting plate Wedge A A A5500 inge Mounting plate Wedge lum, Inc. Subject to technical modifications without notice

52 Mitered corner specifications inges Positive angle applications NOE: CLIP top LUMOION CLIP top NOE: Miter door 65 Miter side 40 Radius edges to fit rial application recommended minimum R=1 =11 23 inge Mounting plate Wedge A A A5500 Angled hinges NOE: Miter door 62 Miter side 48 Radius edges to fit rial application recommended NOE: Miter door 70 Miter side 45 Radius edges to fit rial application recommended NOE: Miter door 70 Miter side 50 Radius edges to fit rial application recommended minimum R=1 =9.5 inge Mounting plate Wedge A inge Mounting plate Wedge A A A5500 inge Mounting plate Wedge A NOE: Miter door 70 Miter side 55 Radius edges to fit rial application recommended R=1 = R=1 =9.5 NOE: Miter door 67 Miter side 68 Radius edges to fit rial application recommended 36 minimum R=1 =9 45 R=1.5 = inge Mounting plate Wedge A A A5040 inge Mounting plate Wedge A Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 52

53 inges Maximum specifications Negative angle applications NOE: CLIP top LUMOION CLIP top minimum minimum =5 OL=10 14 =5 OL=15 =5 OL=15 inge Mounting plate Wedge A A5500 inge Mounting plate Wedge A A A5010 inge Mounting plate Wedge A minimum 20 minimum =5 =5 = OL=8.5 OL=15 OL=14 inge Mounting plate Wedge A A A5500 inge Mounting plate Wedge A A A5040 inge Mounting plate Wedge A minimum minimum =5 OL=9.5 =5 OL= =5 OL=11 inge Mounting plate Wedge A A A5500 inge Mounting plate Wedge A A A5040 inge Mounting plate Wedge A lum, Inc. Subject to technical modifications without notice

54 =5 Inset door specifications inges Negative angle applications NOE: CLIP top LUMOION CLIP top minimum minimum R=1 =3.5 inge Mounting plate Wedge A A = 6 R=2.5 inge Mounting plate Wedge A A A =9 R=2.5 inge Mounting plate Wedge A Angled hinges minimum minimum R=2.5 =8 inge Mounting plate Wedge A A A5500 inge Mounting plate Wedge A A A R=2.5 = R=2 inge Mounting plate Spacer A Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 54

55 inges CLIP accessories inge arm cover cap P (lum logo) M Nylon Steel 100, 107, 110, 110 +, 120, 120 +, thick door Straight-arm 90M and bi-fold hinges Embossed lum logo P Cranked-arm Diagonal 45, blind corner, narrow aluminum door hinges 90M Angled, mini and glass door hinges with straight or cranked-arms /125 hinges hinges NOE: Custom logo cover caps available (minimums apply) inge cup spacer 1.5 mm spacer for use under the hinge cup Use to retrofit existing doors with a cup depth less than mm Non-stackable Gray nylon inge cup cover cap For use with CLIP top LUMOION hinges Suitable for screw-on, press-in and EXPANDO hinge cups Can also be used with CLIP top 110 and hinges Steel, nickel-plated inge cup spacer inge cup cover cap inge cup cover cap For use with CLIP top hinges only Suitable for screw-on, press-in and EXPANDO hinge cups for CLIP top 107, 120, 120 +, thick door and blind corner hinges Clip on attachment/removal Steel, nickel-plated 3 mm spacer Reduces s by 3 mm Mounts under CLIP wing mounting plates Stackable Gray nylon inge cup cover cap mm spacer lum, Inc. Subject to technical modifications without notice

56 Angle restriction clips inges Angle restriction clip for 107 hinges 86 Reduces opening angle of the CLIP top and CLIP 107 to 86 For use with CLIP top and CLIP 107 hinges only Installs quickly, easily and tool-free Non-removable lack nylon 86 Angle restriction clip Angle restriction clip for 110 hinges 1 Reduces opening angle of the CLIP top 110 and to 86 For use with CLIP top 110 and hinges only Installs quickly, easily and tool-free either before or after the hinge has been installed lack nylon 2 Angle restriction clip Angle restriction clip for 170 hinges 0 Reduces opening angle of the CLIP top 170 to 0 Required for special applications of the 170 hinge Installs quickly, easily and tool-free lack nylon 0 Angle restriction clip Angle restriction clips for zero protrusion hinges 110 Reduces opening angle of CLIP top 155 hinge to 110 or 92 For use with 155 /125 hinges only Installs quickly, easily and tool-free Gray nylon 110 for 155 / 92 for 125 Angle restriction clip N 92 Angle restriction clip for N09 NOE: Restriction clip N provides the 155 hinge with 110 and the 125 hinge with 92 Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 56

57 inges CLIP mounting plates Standard one-piece wing mounting plates Wood screw Steel, nickel-plated Attached with #6 x 5/8" wood screws eight adjustment ±3 mm 32 * 0 plate height () 173L plate height () 173L60 System screw 11.5 Steel, nickel-plated Attached with pre-mounted Ø5 mm system screws ( E) eight adjustment ±3 mm 32 Ø5 * 0 plate height () 173L plate height () 173L80 EXPANDO 11.5 Steel, nickel-plated Attached with pre-mounted screws with EXPANDO dowels ( ) eight adjustment ±2 mm Ø5 32 * 0 plate height () 174E EXPANDO (twin application) 7.5 Steel, nickel-plated Attached with pre-mounted screws with EXPANDO dowels for twin application ( ) eight adjustment ±2 mm Ø5 32 * 0 plate height () 174E610Z System screw 11.5 Zinc die-cast, nickel-plated Attached with pre-mounted Ø5 mm system screws ( E) eight adjustment ±3 mm *Add additional wood screw if used with wide angled hinges 32 * Ø5 0 plate height () 175L plate height () 175L80 9 plate height () 175L lum, Inc. Subject to technical modifications without notice

58 CLIP mounting plates inges Cam adjustable wing mounting plates Wood screw Steel, nickel-plated Attached with #6 x 5/8" wood screws Cam height adjustment ±2 mm 32 0 plate height () plate height () 170 System screw 11.5 Steel, nickel-plated Attached with #7 x 5/8" wood screws or Ø5 x mm system screws Cam height adjustment ±2 mm Ø plate height () plate height () CLIP plates EXPANDO 11.5 Steel, nickel-plated Attached with pre-mounted screws with EXPANDO dowels ( ) Cam height adjustment ±2 mm 32 Ø5 * 0 plate height () E 3 plate height () 17470E EXPANDO (twin application) 7.5 Steel, nickel-plated Attached with pre-mounted screws with EXPANDO dowels for twin application ( ) Cam height adjustment ±2 mm Ø5 32 * 0 plate height () ZE INSERA 11.5 Steel (closing lever zinc die-cast, nickel-plated) ool-free assembly with INSERA self-anchoring feature Cam height adjustment ±2 mm Ø5 *Add additional wood screw if used with wide angled hinges 32 * 0 plate height () I 3 plate height () 17470I Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 58

59 inges CLIP mounting plates Standard two-piece wing mounting plates Wood screw Zinc die-cast, nickel-plated Attached with #6 x 5/8" wood screws eight adjustment ±2 mm * 32 0 plate height () plate height () plate height () System screw 11.5 Zinc die-cast, nickel-plated Attached with #7 x 5/8" wood screws or Ø5 x mm system screws eight adjustment ±2 mm Ø5 0 plate height () plate height () plate height () plate height () plate height () Cam adjustable in-line mounting plates Wood screw Steel, nickel-plated Attached with #6 x 5/8" wood screws Cam height adjustment ±2 mm Use of mounting plate template recommended plate height () Press-in 11.5 Steel, nickel-plated Pre-attached with 10 mm dowels Cam height adjustment ±2 mm Use of insertion ram MZM.0053 required Ø plate height () EXPANDO 11.5 Steel, nickel-plated Attached with pre-mounted screws with EXPANDO dowels Cam height adjustment ±2 mm Use of mounting plate template recommended *Add additional wood screw if used with wide angled hinges Ø5 0 plate height () E 3 plate height () 17730E lum, Inc. Subject to technical modifications without notice

60 Face frame adapter plates inges Face frame adapter plates Cam adjustable center mount NOE: CLIP top LUMOION and CLIP top 110 INSERA hinges can be used with this plate Cam adjustable off-center mount Steel, zinc die-cast and nickel-plated Attached with #7 x 3/4" wood screws Center mount 9.5 (3/8") Cam height adjustment ±2 mm not for use with INSERA hinges 0 plate height () plate height () plate height () plate height () Steel, zinc die-cast and nickel-plated Attached with #7 x 3/4" wood screws For use with INSERA hinge cups Off-center mount 12.5 (1/2") Cam height adjustment ±2 mm plate height () Center mount Zinc die-cast, nickel-plated Attached with #7 x 3/4" wood screws Center mount 9.5 (3/8") CLIP plates 32 eight adjustment ±2 mm plate height () 175L Off-center mount Zinc die-cast, nickel-plated Attached with #7 x 3/4" wood screws Off-center mount 12.5 (1/2") eight adjustment ±2 mm 0 plate height () 175L plate height () 175L plate height () 175L With flange Recommended when using 170 and zero protrusion hinges on face 50 frame cabinets Zinc die-cast, nickel-plated 0 15 Attached with #7 x 3/4" wood screws Off-center mount 12.5 (1/2") eight adjustment ±2 mm 0 plate height () 175L NOE: Use of PLAEMAE required with all face frame adapter plates. Reference page 96 Inset face frame adapter russ head screw Zinc die-cast, nickel-plated Attached with #8 x 3/4" truss head screws Can be used with applied bead molding Cam height adjustment ±2 mm Use with half-cranked hinges only Wide angle hinges not recommended Use of PLAEMAE required for installation 9 plate height () Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 60

61 inges LUMOION for doors overview for CLIP hinges Standard hinge Standard hinge Standard hinge Standard hinge Standard hinge Standard hinge hick door hinge Straight-arm hinge, 0 plate Straight-arm hinge, 0 plate Straight-arm hinge, 0 plate Straight-arm hinge, 0 plate Straight-arm hinge, 0 plate Straight-arm hinge, 0 plate Straight-arm hinge, 0 plate 973A A A A A A A Overlay 971Axxxx 971Axxxx 971Axxxx 971Axxxx 971Axxxx 971Axxxx 971Axxxx 970A A A A A A A1002 Straight-arm hinge, 9 plate Straight-arm hinge, 9 plate Straight-arm hinge, 9 plate Straight-arm hinge, 9 plate Straight-arm hinge, 9 plate Straight-arm hinge, 9 plate Straight-arm hinge, 9 plate Partial/twin 973A A A A A A A alf-cranked hinge, 0 plate alf-cranked hinge, 0 plate alf-cranked hinge, 0 plate alf-cranked hinge, 0 plate 973A A A A A A A A A A A1002 Straight-arm hinge, 18 plate Straight-arm hinge, 18 plate Straight-arm hinge, 18 plate Straight-arm hinge, 18 plate Straight-arm hinge, 18 plate Straight-arm hinge, 18 plate Straight-arm hinge, 18 plate 973A A A A A A A alf-cranked hinge, 9 plate alf-cranked hinge, 9 plate alf-cranked hinge, 9 plate alf-cranked hinge, 9 plate Inset 973A A A A0600 Full-cranked hinge, 0 plate Full-cranked hinge, 0 plate 973A A A A A A A A A lum, Inc. Subject to technical modifications without notice

62 inges 155 / Zero protrusion hinges Standard hinge Aluminum door hinge Glass door hinge Mini hinge lind corner hinge and inset Angled hinges: +30 II, +45 I,+45 II Straight-arm hinge, 0 plate Straight-arm hinge, 0 plate Straight-arm hinge, 0 plate 973A A A Axxxx 971Axxxx 971Axxxx 971Axxxx 970A A A A A A A1002 Straight-arm hinge, 9 plate Straight-arm hinge, 9 plate Straight-arm hinge, 9 plate 973A A A LUMOION for doors alf-cranked hinge, 0 plate 973A A A A A A A A1002 Straight-arm hinge, 18 plate Straight-arm hinge, 18 plate Straight-arm hinge, 18 plate 973A A A alf-cranked hinge, 9 plate 973A0600 Full-cranked hinge, 0 plate 973A A A A A A A A1002 Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 62

63 inges LUMOION 973A for CLIP hinges Features Soft-closing feature for CLIP top and CLIP hinges Offers the same quality of motion as drawer systems with LUMOION Automatically adjusts to the closing force of the door Simple attachment to the hinge arm Designed for use with lum CLIP hinges only Nickel-plated steel and gray nylon For straight-arm hinges 36 CLIP top 107 CLIP top 110 CLIP top CLIP top 120 CLIP top CLIP top 95 thick door CLIP top 120 aluminum door CLIP 100 CLIP 107 Straight-arm 973A For half-cranked arm hinges CLIP top 110 CLIP top 120 CLIP top 95 thick door CLIP 100 alf-cranked arm 973A0600 For full-cranked arm hinges CLIP top 110 CLIP top 95 thick door CLIP Full-cranked arm 973A lum, Inc. Subject to technical modifications without notice

64 General specifications inges Specifications For 170 hinges CLIP top 170 straight-arm CLIP top 170 half-cranked X S inge X S CLIP top 170 straight-arm max. CLIP top 170 half-cranked max. NOE: Additional clearance of 41 mm needed above and below for interior roll-out 973A6000 For zero protrusion hinges 155 /125 X S X S LUMOION for doors CLIP top 155 X S CLIP top 125 X S Straight-arm alf-cranked NOE: Additional clearance of 41 mm needed above and below for interior roll-out Straight-arm A7000 Attachment Attach to the square hole in the hinge arm 1 Pull forward and down on the front Removal Pull forward and up simultaneously 2 Push down on the back LUMOION per door LUMOION 973A is designed for one LUMOION per self closing hinge, however, quantities may vary depending on door size and weight Small or light doors may only require one LUMOION rial application recommended LUMOION 973A inges Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 64

65 inges LUMOION 971A for CLIP hinges Features Soft-closing feature for CLIP top and CLIP straight-arm hinges Offers the same quality of motion as drawer systems with LUMOION Adjustable to various door sizes and weights (+3/-7 mm range) Installed onto hinge-side panel For use with straight-arm hinge and either 0 mm or 3 mm mounting plate only Nickel-plated steel and gray nylon Wing plate (screw-on) 32 mm setback, 32 mm apart Attach with #6 x 5/8" wood screws Nickel-plated steel and gray nylon mm 971A0500 Installation screw 606N or 606P Face frame adapter plate (screw-on) mm setback, 32 mm apart Attach with #6 x 5/8" wood screws Nickel-plated steel and gray nylon mm 971A0700 Installation screw 606N or 606P lum, Inc. Subject to technical modifications without notice

66 General specifications inges Specifications LUMOION per door For optimum LUMOION effect, LUMOION 971A should be installed onto the hinge-side panel centered between the two hinges all or heavy doors may require an additional LUMOION 971A between the hinges rial application recommended LUMOION 973A inges 0 mm LUMOION application For all hinges with a straight-arm and a 0 mm mounting plate 25 LUMOION for doors Adjustment Use a Phillips or POZI screwdriver to adjust the contact point in or out (+3/-7 mm) Adjust out for larger, heavier doors or adjust in for smaller, lighter doors Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 66

67 inges LUMOION 970A for CLIP hinges Features Soft-closing feature for CLIP top and CLIP hinges Offers the same quality of motion as drawer systems with LUMOION Automatically adjusts to the closing force of the door Installed into the top and/or bottom panel or with adapter plates on hinge-side Gray nylon LUMOION 970A LUMOION per door LUMOION 970A is designed for two LUMOION per door, however, one may be enough depending on door size and weight Small or light doors may only require one LUMOION rial application recommended LUMOION 970A 970A1002 LUMOION 973A inges Face frame adapter (screw-on) mm setback, 32 mm apart Can also be used in panel cabinets Attach with #6 x 5/8" wood screws Steel, nickel-plated Screw-on Installation screw 606N or 606P Wing adapter (EXPANDO) mm setback, 32 mm apart EXPANDO version installs with pre-attached screws Steel, nickel-plated Ø EXPANDO E1 In-line adapter (screw-on) mm setback, 32 mm apart wo-piece design Attach with #6 x 5/8" wood screws Steel, nickel-plated and gray nylon Screw-on Installation screw 606N or 606P lum, Inc. Subject to technical modifications without notice

68 General specifications inges LUMOION 970A Standard applications For angled applications he charts below provide the boring distance based on the application and mounting boring distance (X) in mm boring distance (X) in mm plate height 3 mm X 50 min. mounting plate height application, refer to pages 45 to 52 Ø Standard application Mounting plate height Overlay boring distance win boring distance Inset boring distance Inset with straight-arm boring distance 0 mm 32 0 mm 41 0 mm mm 50 3 mm 35 3 mm 44 3 mm 53 6 mm 38 6 mm 47 9 mm 41 9 mm 50 lind corner applications Mounting plate height Inset blind corner boring distance Overlay blind corner boring distance 0 mm 32 3 mm 51 3 mm 35 6 mm 38 LUMOION for doors Angled applications (reference angle applications page (47 to 54) Max. boring distance Partial boring dist. Corner merge boring distance Inset boring distance Mitered corner boring distance Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 68

69 inges Mounting he IP-ON unit can be either bored into the cabinet end panel or a attached to the cabinet interior using adapter plates. Catch plate he catch plate is the counterpart to IP-ON. It is available in self-adhesive or screw-on versions. inges Free swing hinges are used with IP-ON for doors with magnet/ self close hinges are used with IP-ON for doors with bumper. IP-ON for doors Opening comfort for doors without handles Doors can be opened easily with IP-ON a light touch is all that's needed Designed for panel or face frame (blocked out) cabinet applications Works with CLIP top LUMOION, CLIP top, CLIP, COMPAC LUMOION and COMPAC Can be bored into the side panel or used with an adapter plate Easy depth adjustment for proper door gap setting Works for both and inset applications Quick and easy installation Increased design options Requires minimal force to open and close lum, Inc. Subject to technical modifications without notice

70 General specifications inges ool-free door gap adjustment he adjustment feature (+4/-1 mm) has been incorporated into the IP-ON unit so even when IP-ON is inserted into the cabinet, it has an integrated gap adjustment. o adjust gap, turn the ejector pin. he click-stop positions allow you to easily find the right setting. IP-ON boring specifications Standard IP-ON set Catch plate (screw-on) Catch plate (self-adhesive) 50 min (3) min. 1 Large IP-ON set Ø10 OL OL 76 min. 2.5 (3) min. Pre-boring Ø2.5 mm countersunk pilot holes required OL = Door NOE: Minimum gap of 3 mm with a screw-on catch plate and 2.5 mm with a self-adhesive catch plate Cleaning of the door surface is recommended IP-ON for doors IP-ON in-line and wing adapter plate specifications In-line adapter plate Catch plate (screw-on) Catch plate (self-adhesive) Installation position min. Wing adapter plate OL OL 1.5 min. NOE: Factory setting of door gap is 2 mm Pre-boring Ø2.5 mm countersunk pilot holes required OL = Door Cleaning of the door surface is recommended NOE: Minimum gap of 3 mm with a screw-on catch plate and 2.5 mm with a self-adhesive catch plate Optimal opening support is achieved if the IP-ON unit is attached exactly where the handle would be. he fixing position can deviate ±12" in height and up to a quarter of the cabinet width in terms of width. Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 70

71 inges IP-ON for doors IP-ON set for standard doors Overlay 50 min Ø Nylon gray unit with magnet tip Adjustment range +4 mm to -1 mm For use with lum Euro free swing hinges For door heights less than 48" Works for and inset applications Can be bored into the panel or used with an adapter plate Inset 50 min Set includes: IP-ON unit Self-adhesive catch plate Screw-on catch plate Wood screw Ø 10 NOE: Due to various door weights and sizes, trial application recommended Standard door set IP-ON set for large doors Overlay 76 min Ø Nylon gray unit with magnet tip Adjustment range +4 mm to -1 mm For use with lum Euro free swing hinges For door heights greater than 48" Works for and inset applications Can be bored into the panel or used with an adapter plate 38 Set includes: Inset 76 min IP-ON unit Self-adhesive catch plate Screw-on catch plate Wood screw Ø 10 NOE: Due to various door weights and sizes, trial application recommended Large door set 956A1004 IP-ON for self close hinges Overlay 76 min Ø Nylon gray unit with bumper tip Adjustment range +4 mm to -1 mm For use with lum Euro self close hinges For door widths greater than 10" Works for and inset applications Can be bored into the panel or used with an adapter plate 38 Inset 76 min Ø 10 NOE: Due to various door weights and sizes, trial application recommended Self close hinges 956A lum, Inc. Subject to technical modifications without notice

72 General specifications inges IP-ON in-line adapter plate for standard doors 14.5 In-line adapter plate for standard doors wo-piece, screw-on base plate 20 mm setback, 17 mm apart Door gap factory setting 2 mm Gray nylon Application Setback Overlay 20 Inset 22 + door thickness Screw-on in-line adapter NOE: For face frame applications, blocking out may be required Installation screw 606N or 606P IP-ON in-line adapter plate for large doors In-line adapter plate for larger doors wo-piece, screw-on base plate 20 mm setback, 32 mm apart Door gap factory setting 2 mm Gray nylon Application Setback Overlay 20 Inset 22 + door thickness Screw-on in-line adapter 956A1201 NOE: For face frame applications, blocking out may be required Installation screw 606N or 606P IP-ON wing adapter plate for large doors Wing adapter plate for large doors One-piece, screw-on wing plate mm setback, 32 mm apart Door gap factory setting 2 mm Gray nylon IP-ON for doors Application Setback Overlay Inset 39 + door thickness Screw-on wing adapter 956A1501 NOE: For face frame applications, blocking out may be required Installation screw 606N or 606P Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 72

73 COMPAC LUMOION and COMPAC hinges A complete face frame program lum s COMPAC hinges program has proven itself as the high quality solution for face frame cabinets for over 30 years and continue to provide the quality of motion you have come to expect from lum hardware. COMPAC LUMOION hinges have the soft closing mechanism integrated directly in the hinge cup. hey are available for most face frame applications or door styles. Deactivation option he LUMOION function can be easily deactivated on one of the hinges, allowing small or light doors to close with the same high quality of motion. Interchangeability COMPAC LUMOION hinges are interchangeable with current COMPAC hinges so there is no need to change existing setups or workflows. Overload safety feature his feature protects the hinge from damage if the door is slammed and maintains the LUMOION soft closing for the life of the hinge.

74 inges COMPAC LUMOION and COMPAC hinges overview COMPAC LUMOION 38N hinges for partial Partial hinges with a 105 opening angle and 7/16" cup depth COMPAC LUMOION 39C/38C hinges for full 39C: Full hinges with a 110 opening angle and 1/2" cup depth 38C: Full hinges with a 107 opening angle and 7/16" cup depth COMPAC LUMOION 38 face mount hinges for full Full face mount hinges with a 107 opening angle and 7/16" cup depth COMPAC 38N hinges for partial Partial hinges with a 105 opening angle and 7/16" cup depth COMPAC 39C/38C hinges for full 39C: Full hinges with a 110 opening angle and 1/2" cup depth 38C: Full hinges with a 107 opening angle and 7/16" cup depth COMPAC 33 hinges for partial and full Economical two-piece assembly hinges with a 110 opening angle and 1/2" cup depth

75 inges COMPAC testing standards Conditions for tests lum, Inc. does a great deal of testing to ensure that the quality of our hardware is consistent with the usual high standards that our customers have come to expect from lum. For this reason we have rigorous testing procedures which are carried out from the development stage through production. lum s internal testing standards are based on practical applications of our products and are more stringent than what is required by ANSI/MA. NOE: All lum hinges meet or exceed ANSI/MA A grade 2 requirements. All concealed hinges are designed for indoor use. Cycle test Specifications Door size 23-5/8" height, 23-5/8" width, 3/4" thickness Door weight 14.3 lb for cycle tests Door weight 18.5 lb for load and over push tests oring distance 3 mm Distance between hinges 16-15/16" inge and mounting plate attachment inges are mounted to test blocks and attached to test door and stand with clamps est blocks for door: Particle board est blocks for mounting plate: Particle board Cycle test Without load 100,000 opening and closing for all COMPAC With load 11 lb extra weight is applied for 100,000 opening and closing cycles kg Positive test result Positive test result Load test Static load 67 lb applied ten times for five seconds, each at 45 opening angle Dynamic load 44 lb extra weight applied for fifty opening and closing cycles kg Positive test result Positive test result Over push test Without load COMPAC hinges Increasing forces up to 11 lb applied for a total of forty times for five seconds each Positive test result lum, Inc. Subject to technical modifications without notice

76 General specifications inges Screw-on Use #6 wood screws Press-in Pre-attached Ø8 dowels installed with lum knock-in tool or MINIPRESS with COMPAC insertion ram Mounting plate attachment 38N series wraparound/edge mount 39C/38C series wraparound 38 series face mount Minimum reveal inge cup centerpoint A minimum reveal per door is required to keep the door from binding and varies depending on door thickness. See minimum reveal table for each hinge. reveal inge cup centerpoint and MINIPRESS/ MINIDRILL setback position is 20.5 (/16") for COMPAC LUMOION hinges 3/4" Ø8 45 Ø door 3 (1/8") 20.5 (/16") NOE: Maximum door thickness 3/4" inges per door his chart can serve as a guide for determining the number of hinges per door. Note that door weight can also determine the number of hinges required. 100" hinges required per door cabinet height 80" 60" 40" lb lb lb 20" <15 lb NOE: he distance between the top and bottom hinges must be greater than the width of the door Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 76

77 inges Adjustments hree-dimensional adjustment Side adjustment eight adjustment Depth adjustment Rotate the front cam screw to increase or decrease door (± 1/16") Loosen installation screws to adjust door position (± 1/8"), then retighten Rotate the rear cam screw to adjust door gap (+ 3/32", - 1/32") LUMOION deactivation Deactivation switch on the hinge cup For small or light doors, the LUMOION can be deactivated on one of the hinges. COMPAC LUMOION comes in the activated position, marked with a "I". he deactivated position is marked with a "0". Door must be closed once for the deactivation to be complete. o reactivate, move switch back to the original position "I" lum, Inc. Subject to technical modifications without notice

78 COMPAC LUMOION 38N for partial inges 105 Features LUMOION integrated into the hinge cup Deactivation switch for small/light doors Overload safety feature One-piece wraparound hinge 7/16" cup depth Edge mount available in 1/2" Minimum reveal sq. edge minimum reveal 3/4" door = 9/32" based on square edge doors oring pattern Dimensions Cabinet 3/4" 3 Door Ø8 7/16" 3/8" pilot hole 1/8" Ø cup depth /16" 105 gap 3/16" factory setting, adjusts +3/32" -1/32" 1/8" 3/4" NOE: Maximum door thickness 3/4" Adjustment Deactivation switch Wraparound and edge mount hinges Wraparound Edge mount COMPAC LUMOION Cam depth adjustment eight adjustment Cam side adjustment Overlay Door protrusion Screw-on 47 Press-in 5/16" 5/16" 38N /8" 1/4" 38N N /2" 1/8" 38N N *1/2" 1/8" 38N355E08 38N358E08 5/8" 0 38N N /4" 0 38N N *Available as edge mount hinge Installation screw russ head screw 834 NOE: COMPAC LUMOION comes in the activated position, marked with a "I" the deactivated position is marked with a "0" Accessories Angle restriction clip inge cup spacer *lank cover cap *See page 82 for additional cover cap options 38C C N3508 Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 78

79 inges COMPAC LUMOION 39C for full Features LUMOION integrated into the hinge cup Deactivation switch for small/light doors Overload safety feature One-piece wraparound hinge 1/2" cup depth Less minimum reveal Minimum reveal sq. edge Features minimum reveal 3/4" door = 7/32" based on square edge doors oring pattern Dimensions Cabinet 3/4" 3 Door Ø8 5/16" 3/8" Ø /2" 3/4" pilot hole 1/8" cup depth gap 3/16" factory setting, adjusts +3/32" -1/32" 1/8" NOE: Maximum door thickness 3/4" Adjustments Deactivation switch Wraparound hinges Cam depth adjustment eight adjustment Overlay Screw-on 47 Press-in 1" 39C C /4" 39C C /16" 39C C /8" 39C C /2" 39C C /16" 39C C Cam side adjustment Installation screw russ head screw 834 NOE: COMPAC LUMOION comes in the activated position, marked with an "I" the deactivated position is marked with a "0" Accessories Angle restriction clip inge cup spacer *lank cover cap *See page 82 for additional cover cap options 38C C C lum, Inc. Subject to technical modifications without notice

80 COMPAC LUMOION 38C for full inges Features Minimum reveal LUMOION integrated into the hinge cup Deactivation switch for small/light doors Overload safety feature One-piece wraparound hinge 7/16" cup depth Ideal for profiled doors sq. edge minimum reveal 3/4" door = 9/32" based on square edge doors oring pattern Dimensions Cabinet 3/4" 3 Door Ø8 5/16" 3/8" Ø /16" 3/4" pilot hole 1/8" cup depth gap 3/16" factory setting, adjusts +3/32" -1/32" 1/8" NOE: Maximum door thickness 3/4" Adjustments Deactivation switch Wraparound hinges COMPAC LUMOION Cam depth adjustment eight adjustment 47 Overlay Screw-on Press-in 1-1/4" 38C C Cam side adjustment Installation screw russ head screw 834 NOE: COMPAC LUMOION comes in the activated position, marked with an "I" the deactivated position is marked with a "0" Accessories Angle restriction clip inge cup spacer *lank cover cap *See page 82 for additional cover cap options 38C C C3508 Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 80

81 inges COMPAC LUMOION 38 for face mount Features LUMOION integrated into the hinge cup Deactivation switch for small/light doors Overload safety feature One-piece face mount hinge 7/16" cup depth Ideal for large s or refacing of cabinets Minimum reveal sq. edge Features minimum reveal 3/4" door = 9/32" based on square edge doors oring pattern Dimensions Cabinet 3 Door Ø8 11/32" min. 11/16" 40 Ø /16" 3/4" 1/8" pilot hole 5/64" cup depth 107 gap 3/16" factory setting 3 NOE: Maximum door thickness 3/4" Adjustments Deactivation switch Face mount hinges eight adjustment Cam side adjustment eight adjustment 47 Overlay Screw-on Press-in 1-3/8" or greater 38355F F22 Installation screw Flat head wood screw 606N or 606P NOE: COMPAC LUMOION comes in the activated position, marked with an "I" the deactivated position is marked with a "0" Accessories Angle restriction clip inge cup spacer 38C C lum, Inc. Subject to technical modifications without notice

82 COMPAC LUMOION hinge accessories inges inge arm cover caps Steel, nickel-plated cap Available blank or embossed (lum logo) Also available with printed custom logo (minimum order quantity applies) 39C/38C cover cap 38N cover cap 39C/38C blank cover cap 39C/38C lum logo embossed cover cap 38N blank cover cap 38N lum logo embossed cover cap 38C C3508.P 38N N3508P Angle restriction clip Restricts opening angle of the COMPAC LUMOION to 86 Angle restriction clip must be inserted before the hinge has been attached to the face frame Gray nylon inge cup spacer 1/16" spacer for use under the hinge cup for thin or profile doors Non-stackable Gray nylon Distance spacer Steel spacer decreases door in 1/32" increments Can be stacked to achieve desired reduction Steel, zinc-coated COMPAC LUMOION inge cup decrease by adding spacers Spacer Angle restriction clip 38C inge cup spacer 38C3559 Distance spacer Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 82

83 inges COMPAC general specifications Screw-on hinge attachment Use #6 wood screws Press-in hinge attachment Pre-attached Ø8 dowels installed with lum knock-in tool or MINIPRESS with COMPAC insertion ram. Mounting plate attachment One-piece assembly wo-piece assembly COMPAC 38N wrap or edge COMPAC 39C/38C wraparound COMPAC 33 edge mount COMPAC 33 face mount Minimum reveal inge cup centerpoint A minimum reveal per door is required to keep the door from binding and varies depending on door thickness (see minimum reveal table for each hinge). reveal Cup centerpoint and MINIPRESS/MINIDRILL setback position is 20.5 (/16") for COMPAC hinges. NOE: Maximum door thickness 3/4" 3/4" Ø8 45 Ø door 3 (1/8") 20.5 (/16") hree-way independent adjustment Side adjustment Depth adjustment eight adjustment Side adjustment is possible on all COMPAC hinges. COMPAC 38N, 39C and 38C have cam side adjustment. COMPAC 38N, 39C and 38C have cam depth adjustment All COMPAC hinges are independently height adjustable lum, Inc. Subject to technical modifications without notice

84 COMPAC 38N for partial inges 105 Features 105 opening angle One piece assembly Wraparound or edge mount 7/16" cup depth ±1/8" height adjustment ±1/16" side adjustment +3/32", -1/32" cam depth adjustment Steel, nickel-plated Can be used with LUMOION 971A9700 Minimum reveal minimum reveal 3/4" door = 9/32" based on square edge doors oring pattern Dimensions Cabinet 3/4" 3/8" 3 Door Ø35 Ø8 45 7/16" 7/16" 3/4" pilot hole 1/8" cup depth gap 3/16" factory setting, adjusts +3/32" -1/32" 1/8" NOE: Maximum door thickness 3/4" Adjustments Wraparound hinges Cam depth adjustment eight adjustment Cam side adjustment Overlay Screw-on 47 Press-in 3/8" 38N355C.06 38N358C.06 1/2" 38N355C.08 38N358C.08 5/8" 38N355C.10 38N358C.10 3/4" 38N355C.12 38N358C.12 Edge mount hinges COMPAC Calculating door protrusion Door Door protrusion 3/8" 1/4" 1/2" 1/8" 5/8" 0 3/4" 0 Overlay Screw-on 47 Press-in 1/2" 38N355CE08 38N358CE08 Installation screw russ head installation screw 834 Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 84

85 inges COMPAC 39C for full Features 110 opening angle One piece assembly Wraparound mount 1/2" cup depth ±1/8" height adjustment ±1/16" side adjustment +3/32", -1/32" cam depth adjustment Steel, nickel-plated Can be used with LUMOION 971A9700 Minimum reveal oring pattern Dimensions Cabinet 3/4" 3 Door Ø8 5/16" 3/8" Ø35 45 pilot hole 1/8" cup depth gap 3/16" factory setting, adjusts +3/32" -1/32" 1/8" NOE: Maximum door thickness 3/4" Adjustments Wraparound hinges Cam depth adjustment eight adjustment Cam side adjustment Overlay Screw-on 47 Press-in 1" 39C355C.16 39C358C /4" 39C355C.20 39C358C /16" 39C355C.21 39C358C /8" 39C355C.22 39C358C /2" 39C355C.24 39C358C /16" 39C358C.25 Installation screw russ head installation screw lum, Inc. Subject to technical modifications without notice

86 COMPAC 38C for full inges Features 107 opening angle One piece assembly Wraparound mount 7/16" cup depth ±1/8" height adjustment ±1/16" side adjustment +3/32", -1/32" cam depth adjustment Steel, nickel-plated Can be used with LUMOION 971A9700 Minimum reveal sq. edge minimum reveal 3/4" door = 9/32" based on square edge doors oring pattern Dimensions Cabinet 3/4" 3 Door Ø8 5/16" 3/8" Ø /8" pilot hole 1/8" cup depth 107 gap 3/16" factory setting, adjusts +3/32" -1/32" 3 NOE: Maximum door thickness 3/4" Adjustments Wraparound hinges Cam depth adjustment COMPAC eight adjustment Cam side adjustment Overlay Screw-on 47 Press-in 1-1/4" 38C355C.20 38C358C /16" 38C358C /8" 38C358C /2" 38C358C /16" 38C358C.25 Installation screw russ head installation screw 834 Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 86

87 inges COMPAC 33 Features 110 opening angle wo piece assembly Edge or face mount 1/2" cup depth ±9/64" height adjustment -1/8" side adjustment only Zinc die-cast hinge and mounting plates Can be used with LUMOION 971A9700 Minimum reveal sq. edge minimum reveal 3/4" door = 3/16" based on square edge doors oring pattern Mounting Cabinet 3/4" 3 Door Ø8 3/8" Ø35 45 pilot hole 1/8" cup depth 3 NOE: Maximum door thickness 3/4" COMPAC 33 spacer For use with profile or thin doors with a cup depth less than mm 1.5 mm spacer placed under the hinge cup Clear nylon Attachment options Edge mount Spacer inge cup Face mount Mounting plate Attachment Screw-on 47 Press-in COMPAC 33 spacer Installation screw Wood screw 606N or 606P lum, Inc. Subject to technical modifications without notice

88 COMPAC 33 mounting plates inges Edge mount specifications 3/8" Minimum of 1/4" using a edge mount plate Maximum of 1-5/8" using a edge mount plate 1-3/8" 1/8" 1/8" 110 P 110 Edge mount mounting plates *Extra screw location Zinc die-cast, nickel-plated Attaches with #6 x 5/8" wood screws (606N or 606P) Overlays from 1/4" to 1-5/8" NOE: An additional screw is required on mounting plates with 1-3/8" to 1-5/8" s to insure stability. Install after height adjustments have been made. Overlay inge arm protrusion (S) Door protrusion (P) Mounting plate 1/4" 1-1/8" 1/2" /2" 7/8" 1/4" /8" 3/4" 1/8" /4" 5/8" " 3/8" /8" 1/4" /4" 3/16" *1-3/8" 3/16" *1-1/2" 3/16" *1-5/8" 3/16" COMPAC Face mount mounting plate 9/16" Zinc die-cast, nickel-plated Attaches with #6 x 5/8" wood screws (606N or 606P) Overlays 1-3/8" or greater 1-1/4" Mounting plate Face mount Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 88

89 inges LUMOION 971A for COMPAC hinges LUMOION 971A poly-bag set Can be used for all COMPAC hinges Set includes: LUMOION mechanism (971A9700) Spacer (971A9709) #8 x 1-1/4" type 17 wood screw #8 x 2" type 17 wood screw 1-1/4" type 17 tip 2" Poly-bag set 971A Full Partial Full 1" or greater Partial less than 1" 15/16" 2-7/8" /16" 15/16" 2-7/8" 1-7/16" LUMOION 971A9700 LUMOION 971A9700 Spacer 971A9709 Installation screw (1-1/4") 8114Z Installation screw (2") 8200Z Specifications Mounting LUMOION for doors mounts anywhere on the hinge-side stile of the cabinet using a 1-1/4" screw or 2" screw when using spacer. Attachment of partial spacer he partial spacer snaps onto the side of the LUMOION for easier mounting. Adjustment Use a Phillips or POZI screwdriver to adjust the contact point in or out (+5/-5 mm). Adjust out for larger, heavier doors or in for smaller, lighter doors LUMOION per door For optimum LUMOION effect, one LUMOION 971A should be installed for most applications. all or heavy doors may require an additional LUMOION 971A rial application recommended. LUMOION 973A inges lum, Inc. Subject to technical modifications without notice

90 COMPAC hinge accessories inges COMPAC cover caps COMPAC 38N cover cap Use with COMPAC 38N hinges Clip on attachment/removal Available blank or with printed custom logo (minimums apply) Steel, nickel-plated COMPAC 39C/38C cover cap Use with COMPAC 39C/38C hinges only Clip on attachment/removal Available blank/embossed blum logo or with printed custom logo (minimums apply) Steel, nickel-plated 38N cover cap lank Embossed lum logo 38C C3508.P Distance spacer spacer decrease by adding spacers Decreases door in 1/32" increments Can be stacked to achieve desired reduction Steel, zinc-coated Distance spacer Dowel cross-reference chart lum press-in and EXPANDO dowels simplify installation Use the charts below to find the proper hinge-to-dowel combination Ø8 mm dowels NOE: All dowels for Ø8 mm holes require a #6 x 1/2" dowel screw ( ) 10 Dowels for Ø8 mm hole ype Series Without flange CLIP top LUMOION, CLIP top and CLIP COMPAC LUMOION and COMPAC Square head with flange With flange Installation screw Installation screw 100 / / / hick door Zero protrusion Diagonal 45 lind corner i-fold 38N 39C/38C/38 33 COMPAC Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 90

91 inges Machines MINIPRESS P Deluxe boring and insertion machine Front adjustable boring distance with digital counter Pneumatic hold-down clamps oring depth adjustment Ruler stops (qty 4) ool kit included Dust collection attachment Optional laser center line set Accepts new 8 or 9 spindle heads Single phase 220V power hree-phase 220V power M *US M *US MINIPRESS M 110V manual boring and insertion machine 110V power with molding plug (portable) Does not require pressurized air Ruler stops (qty 4) ool kit included Dust collection attachment Accepts new 8 or 9 spindle heads Single phase 110V power M *US MINIDRILL P Standard boring machine Front adjustable boring distance Ruler stops (qty 4) ool kit included Dust collection attachment Optional laser center line, digital counter and hold down clamps sets Accepts new 8 or 9 spindle heads Single phase 220V power M * lum, Inc. Subject to technical modifications without notice

92 Machine accessories inges 9 spindle head 9 spindle head for use with MINIPRESS/MINIDRILL ores nine holes spaced 32 mm apart, parallel to the fence Quick-disconnect chucks Once aligned, does not require additional adjustment ores cabinet side panel for 32 mm system boring for lum mounting plates and runners Requires retrofit set for use with machines produced in 2009 or prior Includes: Ø3 mm allen wrench Distance spacer Drive pin Air hose NOE: Requires 5 each left hand and 4 each right hand drill bits. Recommended drill bit size for quick disconnect chucks: overall length is 57 mm and shank is 10 mm in diameter and 27 mm in length. 9 spindle head MZK.0S Chuck cover cap M spindle head NOE: Requires 4 each left hand and 4 each right hand drill bits. Recommended drill bit size for quick disconnect chucks: overall length is 57 mm and shank is 10 mm in diameter and 27 mm in length. 8 spindle head for use with MINIPRESS/MINIDRILL ores eight holes spaced 32 mm apart, perpendicular to the fence Quick-disconnect chucks Once aligned, does not require additional adjustment ores all MEAOX and ANDEMOX front fixing brackets/galleries ores cabinet side panels for all lum runner systems Requires retrofit set for use with machines produced in 2009 or prior Includes: Ø3 mm allen wrench Distance spacer Drive pin Air hose 8 spindle head MZK.880S Chuck cover cap M30.29 Spindle head retrofit set 1 Required for attachment of 9 and 8 spindle heads to MINIPRESS/ MINIDRILL produced in 2009 and prior Previous boring heads MZK.1000.US and MZK.8000.US cannot be used with the retrofit set Set includes: 1 Adapter ring and shield Machines & accessories Ø5 mm allen wrench 3 Mounting bolts (qty 4) Alignment pins (qty 2) 5 Alignment template 6 mm fixed depth stop (qty 2) Spindle head retrofit set M30..UM Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 92

93 inges Machine accessories Work table for M51 machine Work table for M52 machine Work table for M53 machine Work table MZA.1000 Work table MZA.5200 Work table MZA.5300 Center ruler Extension ruler Extension ruler support Center ruler, 600 (2') M Extension ruler, 1250 (4') MZL.1250.US Extension ruler support MZV.2100 Ruler stop Small ruler stop Large ruler stop Left or right ruler stop Left or right ruler stop Symmetrical ruler stop Ruler stop MZS.3000 Small ruler stop MZS.2000 Large ruler stop MZS.1000 Fixed depth stop (1/2") fixed depth stop for use with M51N machines (-shaped) Fixed depth stop (1/2") fixed depth stop for use with M53. machines Digital counter set For MINIPRESS P Fixed depth stop M Fixed depth stop M Digital counter set MZE.2110 old down clamp set Laser center point set reakaway clutch For use with MINIPRESS and MINIDRILL old down clamp set M US Laser center point set MZR.5300.US reakaway clutch MZK lum, Inc. Subject to technical modifications without notice

94 Machine accessories inges Euro hinge insertion ram Can be used for inserting CLIP top LUMOION, CLIP top and CLIP press-in hinges Not for use with wide angled or specialty hinges Euro hinge insertion ram Can be used for inserting lum wide angle press-in hinges NOE: Can be used with CLIP top LUMOION 95, CLIP top 95 and CLIP 100 by adjusting the ball plungers #10 insertion ram MZM #18 insertion ram MZM.0018 Euro hinge insertion ram Can be used for inserting most lum press-in Euro hinges COMPAC hinge insertion ram Can be used for inserting all lum COMPAC press-in hinges Mounting plate insertion Ram MINIPRESS insertion ram for press-in, in-line mounting plate NOE: Not for use with 170, 155 and 125 wide angle hinges #40 insertion ram MZM.0040 #47 insertion ram MZM.0047 #53 insertion ram MZM.0053 Machine drill bits Ø5 mm drill bit (right handed) M01.Z05.D2 R Ø5 mm drill bit (left handed) M01.Z05.D3 L Ø8 mm drill bit (left handed) M01.Z08.03 L Ø10 mm drill bit (right handed) M01.Z10.02 R Ø5 mm Ø8 mm Ø10 mm Ø35 mm Ø10 mm drill bit (left handed) M01.Z10.03 L NOE: Machine drill bits need to be set to 57 mm in length to achieve proper bore depth. wist drill bits high speed steel Ø20 mm drill bit (right handed) Ø35 mm drill bit (right handed) M01.Z20.02 R M01.Z35.02 R Machines & accessories VP-5 centering bit VP-5 Ø2 mm left D-2mm Ø2.5 mm right D-2.5mm Ø5 mm right D-5mm VP-5 wist drill bit *Chuck for D-2 mm Ø8 mm right D-8mm Ø10 mm right D-10mm *Used to pilot bore for screw-on hinges with MINIPRESS or MINIDRILL Ø10 mm chuck for D-2 mm D-10 x 2mm Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 94

95 inges Assembly aids Knock-in tool Can be used to insert all lum press-in hinges Knock-in tool ZME.0710 ECODRILL 9.5 door Ø35 C Simple device for boring lum hinge pattern Driven by electric/cordless drill (18v or higher) oring distance adjusts from 2 mm to 8 mm Clamps to various door thicknesses up to 40 mm Includes drill bits (pre-installed) and two orx bits ECODRILL M Ø8 Accessories Replacement Ø35 mm bit M31.Z35.02 Replacement Ø8 mm bit M31.Z08.02 ool set MZW.00 ECOJIG holes are: 32 mm apart, mm setback 32 Used to bore Ø5 mm holes for mounting plates that are mounted with system screws, EXPANDO dowels or INSERA Also can be used to pre-bore Ø5 mm holes for EXPANDO LUMOION adapters Ø5 mm stop collar included ECOJIG Universal individual template For pre-boring mounting plates Also used for marking and pre-boring cabinet profiles, LUMOION, IP-ON adapter plates and AVENOS locating pins Calibrated scale for accurate setting Universal individual template Mounting plate template in-line wing For pre-boring IP-ON for doors wing and in-line adapters Can also be used to bore for wing ( mm) and in-line (20 mm) mounting plates Additional hole location added ( mm) for in-line adapter for standard doors Simple location of adapter and mounting plate screw positions Pilot bore Ø2.5 mm holes for wood screws Mounting plate template * lum, Inc. Subject to technical modifications without notice

96 Assembly aids inges QUICKFIX Drilling sleeve dimensions changed from 2.5 mm to 5 mm for drilling for in-line mounting plates Locates/matches positions of hinges and plates on cabinets and doors ransfers positions from door-to-cabinet and cabinet-to-door Adjustable stop for various door s For use with wing or in-line mounting plates QUICKFIX Accessories Additional CLIP template meter rail Ø5 mm drill bit D-5mm PLAEMAE oring template for all lum face frame adapter plates Clamps to the frame with cam lever Adjustment knob accommodates frame thickness of 5/8" to 1" Spacer screws permit quick use without measuring Includes 2.5 mm pilot bit and drill bit extension PLAEMAE Dowelling fixture ool designed for attaching and removing dowels from hinges Mounts directly to work surface Doweling fixture INSERA boring template For boring Ø8 mm dowel holes after Ø35 mm hole is bored oring distance adjusts from 2 mm to 8 mm Also bores Ø5 mm holes for system screw mounting plates Includes drill stop collar to pilot bore Ø2.5 mm for screw-on plates INSERA boring template A LUMOION and IP-ON for doors boring template For pre-boring LUMOION and IP-ON units Ø10 mm drill bushing for edge boring ores left and right side of cabinet Includes Ø10 mm stop collar Assembly aids LUMOION and IP-ON for doors boring template Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 96

97 inges Assembly aids Deep thread wood screw For attaching hinges and mounting plates Deep thread system screw Pilot bore Ø5 (3/16") hole Ø5 #6 x 1/2", #2 Phillips 6062N #6 x 5/8", #2 Phillips 606N #6 x 5/8", #2 POZI 606P #6 x 3/4", #2 Phillips 6064N #7 x 5/8", #2 Phillips 707N #7 x 3/4", #2 Phillips 7074N #7 x 10 mm, #2 POZI G #7 x 11.5 mm, #2 POZI G #7 x mm, #2 POZI G #7 x 14.5 mm, #2 POZI G #7 x 20 mm, #2 POZI G #7 x 25 mm, #2 POZI G Pan head system screw Pilot bore Ø5 (3/16") hole Ø5 POZI DRIVER and bits A POZI screwdriver (different from Phillips) is the most crucial tool you can use to assure that full torque is applied to all lum mounting screws. POZI screws can be identified by the distinctive tick marks located in the center of the screw head recess. #7 x 14.5 mm, #2 POZI E POZI Phillips russ head screw For attaching COMPAC hinges to face frame ype 17 #8 x 3/4", #2 Phillips 834 tick marks #2 POZI DRIVER POZI DRIVER 1/4" Magnetic bit holder I OLDER #2 x 1" POZI bit insert POZI I #2X1 #2 x 2" POZI bit insert POZI I #2X2 win application screw Ø8 mm dowels Pre-bored Ø5 (3/16") hole Square head dowel for attaching to hinges Round dowel for insertion into doors (9/16") screw (5/8") sleeve For panel thickness mm (25/32") sleeve For panel thickness mm Ø8 mm round dowel Ø8 mm square dowel With flange Installation screw Installation screw lum, Inc. Subject to technical modifications without notice

98 Notes inges Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 98

99 inges Notes lum, Inc. Subject to technical modifications without notice

100 Notes inges Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 100

101 inges Part numbers A A A A L L L L E E610Z E I ZE E I L L L L L L L L E E , F F C C , 90 38C3508.P 82, 90 38C C C355C C C358C C358C C358C C358C C358C N N3508P 82 38N N N N N355E N355C N355C N355C N355C N355CE N N N N N N358E N358C N358C N358C N358C N358CE C C C C C C C355C C355C C355C C355C C355C C C C C C C C358C C358C C358C C358C C358C C358C N N N P A * G G G G G G E P , N N 97 70M2550.L 42 70M2580.L 42 70M2650.L 42 70M2750.L 42 70M2780.L L L L L L L L L L N N L L L L E A , , , 44 71M M M M M M lum, Inc. Subject to technical modifications without notice

102 Part numbers inges Page no. 71M M M E E D N D N N N N , , , L L L A.L E E A A E M A A A A A A A A A , , Z Z M A A A A E A A A A A A A A A A A I OLDER 97 D-10 x 2mm 94 D-10mm 94 D-2.5mm 94 D-2mm 94 D-5mm 94 D-8mm 94 M01.Z05.D2 R 94 M01.Z05.D3 L 94 M01.Z08.03 L 94 M01.Z10.02 R 94 M01.Z10.03 L 94 M01.Z20.02 R 94 M01.Z35.02 R 94 M M M M30..UM 92 M M M31.Z M31.Z M *US 91 M US 93 M *US 91 M *50 91 M *US 91 MZA MZA MZA MZE MZK.0S 92 MZK MZK.880S 92 MZL.1250.US 93 MZM MZM MZM MZM MZM MZR.5300.US 93 MZS MZS MZS MZV MZW POZI I #2x1 97 POZI I #2x2 97 POZI DRIVER 97 VP-5 94 ZME Dimensions in millimeters (inch equivalents as noted) 2016 lum, Inc. 102

103

104 Why choose lum lum, Inc. is a leading manufacturer of functional hardware for the kitchen cabinet and commercial casework industries specializing in lift systems, concealed hinges and drawer runner systems. Virtually all of the hardware needed to assemble and make cabinets functional is available within the wide range of quality lum products. lum supports the U.S. market with a network of more than 150 dependable distributors, 40+ knowledgeable lum sales representatives and an experienced customer service department. Commitment to manufacturing in the U.S. lum manufactures many of its products in our 450,000 sq ft manufacturing, logistics and warehouse facility located in Stanley, North Carolina. Manufacturing closer to the customer allows lum to react quickly to changing customer needs including unexpected surges in demand. Customer pickups and deliveries can be timed to better match their production schedules. lum is committed to manufacturing in the U.S. for the U.S. market. Product development at lum considers all of the various customers who will come in contact with our products. With this Global Customer enefits philosophy we strive to create advantages for all users. lum, Inc. is ISO 9001 certified which means that you are assured of consistent quality in every lum product. hey exceed the requirements of ANSI/MA standards for cycle life, static load and self-closing performance.