Kitchen and Bath Organization

Transcription

1 Ironing Boards Pull-Out Table Systems Foldaway Systems Corner Systems Base Cabinet Pull-Out Systems Basket Storage Systems Pantry Pull-Out Systems Waste and Recycling Systems Pull-Out Towel Racks Drawer Inserts

2 Cabinet Accessories Pole System Kitchen Railing and Backsplash Sytems Countertop and Suspension Systems Ventilation Grills Lattice

3 Ironing Boards Ironfix Built-in Ironing Board Space-saving, cabinet drawer installation Continuous width adjustment for inside clear widths of mm (14 1 / 4" / 16") Inside clear depth 500 mm (19 11 / 16") Integrated spring mechanism Drawer front folds down to allow for trousers, shirts, etc Support extends automatically as ironing board is pulled out Inside clear width mm (14 1 /4" /16") 950 (37 3 /8") Cabinet inside clear depth 500 mm (19 11 /16") 300 (11 3/4") D E Use the below dimensions to match ironing surface to countertop height. 32 (1 1 /4") D (mm) 20 ( 7 /8") 30 (1 1 /8") 40 (1 1 /2") 50 (2") E (mm) 86 (3 3 /8") 76 (3") 66 (2 1 /2") 66 (2 1 /2") 873 max. 19 (3/4") (1 7 /16") (16 3 /8"), epoxy-coated; heat-resistant striped fabric-covered ironing surface white RAL (includes installation hardware, mounting instructions 1 collapsible ironing board support system with folding ironing board and runners.) Replacement heat-resistant cover for ironing board with elastic band. Material: natural cotton, foam-backed white/grey striped Sleeve board, optional Retrofits easily to Ironfix built-in ironing board. white RAL Replacement heat-resistant cover for sleeve board with elastic band. Material: natural cotton, foam-backed white/grey striped

4 Ironing Board for Wall Mounting Ironfix Wall-mounted Turning mechanism; swivel range 180º Locks in left, right, or inclined position 326 (12 7/8") 950 (37 3/8") 525 (20 5/8") 185 (7 1/4") 300 (11 7/8") 985 (38 7/8") 110 (4 3/4") 120 (4 3/4") Ironfix wall-mounted ironing board, epoxy-coated Cover: natural white cotton with grey stripes, foam-backed white RAL (Includes installation hardware) 365 (14 3/8") 595 (23 7/16") 140 (5 1/2") Wall Cover, optional with slightly structural surface Material: polystyrene white RAL Replacement heat-resistant cover, with elastic band Material: natural cotton, foam-backed white/grey stripes

5 Pull-out Table Systems Self-supporting table A drawer front panel can be screw-mounted directly onto the table front panel The system can be subsequently installed in place of a drawer or between two cabinets Fitting is not visible when installed Rapid Pull-Out Table, cantilever 600 mm (23 5 / 8") wide cabinets Load capacity: 100 kg (220 lbs.) (evenly distributed) 561 (22") 800 (31 1 /2") 120 (4 3 /4") 490 (19 1 /4") Table width 521 (20 1 /2") Material: wood Table top: melamine plastic coated Telescopic guides: beech white/grey dotted maple (includes housing, guides and front panel) 875

6 Pull-out Table Systems Top Flex Pull-Out Table System Extension fitting can support any width surface up to 900 mm (35 / 2") Maximum load 15 kg (33 lbs.) As the pull-out table is extended, the front panel drops down automatically until the top is flush with the table Extended length: 810 mm (32") Cabinet width: mm (17 3 / 4" 35 1 / 2") Interior cabinet opening height: 120 mm (4 3 / 4") Minimum cabinet depth: 510 mm (20"), plated Packing: 1 set (table top and front panel are customer supplied) 810 (32") 120 (4 3/4") stretcher and Worktop thickness 16 mm (5/8 ) Customer supplied (17 3/4"-35 1/2") 876

7 Pull-out Table Systems The inner tabletop sections fold downward on tracks when the table is closed, occupying a minimum of space against the rear panel of the cabinet Dimensions in parentheses are for 600 mm (24") installed depth Maximum width of top is 600 mm Unit must be pulled out completely during operation Text Change Bio-Fix products from Häfele. 320 (12 5 /8") (420) (16 1 /2") 320 (12 5 /8") (420) (16 1 /2") 620 (24 3/8") (820) (32 1 /4") A 130 (5 1 /8") 420 (16 1 /2") (520) (20 1 /2") 55 (2 1 /8") Tabletop width A approximately 2 mm less than inside cabinet width. Pull-out Table System, cantilever For 2-part tabletop, max. thicknesses 18 mm ( 3 4 ) Weight capacity: 30 kg. (66 lbs) evenly distributed Cabinet depth galvanized 500 mm (20") mm (24") Packing: 1 set (includes mounting instructions) Pull-out table systems, with fixed front panel 877 The panel either projects above the level of the table. Or the panel is mounted flush with the tabletop, in which case a shallow trim is required above the pull-out front.

8 Foldaway Systems Latch locks in down as well as up position Prevents shelf from banging against the lower cabinet door from the inside when closed Cabinet widths of 300 mm (11 7 / 8") to 600 mm (23 5 / 8") and shelf depth of 420 mm (16 1 / 2") Load bearing capacity: 12 kg (26 lbs) Kitchen and Bath Organization Bio-Fix products from Häfele. Foldaway Fitting, with locking mechanism 266 (10 1/2") 212 (8 3/8") 600 (23 5/8") max. inside dim. minus 70 mm (2 3/4"), epoxy-coated Minimum Inside Cabinet For Storage Of Height-including swing arc Depth Max. Height Up To Max. Depth Up To white 470 mm (18 1 / 2") 465 mm (17 1 / 4") 305 mm (12") 292 mm (11 1 / 2") mm (8") 406 mm (16") 570 mm (22 1 / 2") 565 mm (19 1 / 4") 394 mm (15 1 / 2") 336 mm (13 1 / 4") mm (13 1 / 2") 406 mm (16") Packing: 1 set (includes 2 mechanisms (left and right), 2 locking devices, 2 tension springs, 4 plastic distance washers, 4 plastic appliance spacers, and mounting instructions) Dimensions for storage of items: PLAN VIEWS Max. Depth 292 (11 1/2") Max. Depth 336 (13 1/4") 202 (8") Max. Height 406 (16") Max. Depth 450 (17 3/4") min. 37 (1 2/3") 305 (12") Max. Height Minimum inside dimensions including swing arc: 470 (18 1/2") 342 (13 1/2") Max. Height 570 (22 1/2") 406 (16") Max. Depth 500 (19 1/2") min. 394 (15 1/2") Max. Height 878

9 Pull Down Shelf Mechanism Suitable for kitchens, offices and hospitals in upper cabinets Fits from 562 mm (22 1/8") to 862 mm (33 15/16") wide cabinets Pull down unit pivots down to permit easier access to upper cabinet Stainless steel side walls easily attach wood shelves (customer supplied) Gas pistons allow for smooth return of mechanism into cabinet Blocking recommended for face-frame applications Load capacity: 12 kg. (26 lb.) Min. 16 (5/8") Cabinet width 285 (11 1/4") Min. 660 (26") Max. 475 (19") Min. 120 (4 3/4") 45 (1 3/4") 283 (11 5/8") 360 (14 5/8") 580 (22 3/4") Material: stainless steel matt Packing: 1 set (includes arms, pistons, 2 sides, 2 bars and mounting instructions) Fence, for wood shelves Press-fits in 5 mm diameter drilled holes Height: 39 mm (1 1 / 2") Length # Press fit plugs chrome-plated 879 Text Change 248 (9 3 4") (11 3 4") (13 3 4") (15 3 4") (17 5 8") (21 1 2") [736 (29 )] Packing: 2 pcs.

10 Corner Access Solutions Magic Corner II With Optional Soft & Silent Feature Soft and Silent Feature slows the pull-out just before final closure, creating automatic and silent closing Shown: Right hand mounting (37 3/4-46 ) 390 (15 3/8 ) cabinet depth 498 (19 5/8 ) 400 (15 3/4 ) 52 (2 1/16 ) Base corner unit for use with hinged door Requires minimum door opening of 494 mm (19 1/2 ) and additional clearance for door hinge Available for left and/or right hand mounting Front baskets pull out and swivel to a 90 open position while back baskets are simultaneously moved to the cabinet opening Back baskets slide forward individually providing total access, epoxy-coated silver Right hand Left hand Packing: 1 set (mounting instructions included) (mounting hardware not included) Baskets and Soft & Silent feature ordered separately. (See below) max (21 1/2 ) 390 (15 3/8 ) 470 (18 1/2 ) 102 (4 ) (15 3/8 ) 525 (20 5/8 ) 390 (15 3/8 ) inside height 535 (21 1/16 ) Arena Plus Tray, with non-slip surface Basket dimensions: Front: 390 x 470 x 88 mm (15 3/8 x 18 1/2 x 3 1/2 ) Back: 390 x 400 x 85 mm (15 3/8 x 15 3/4 x 3 3/8 ) Material: Shelf: melamine Surround: steel Non Slip white/chrome-plated maple/chrome-plated Packing: 1 set (2 front and 2 back baskets) Soft & Silent Feature For base corner unit system Material: plastic grey Storage Baskets for base corner unit system Basket dimensions: Front: 390 x 470 x 88 mm (15 3/8 x 18 1/2 x 3 1/2 ) Back: 390 x 400 x 85 mm (15 3/8 x 15 3/4 x 3 3/8 ) wire chrome-plated Packing: 1 set (2 front and 2 back baskets) 880

11 Corner Access Solutions Magic Corner I With Optional Soft & Silent Feature Available for left or right hand mounting The cabinet door mounts to the pull-out frame When the door is opened, it is pulled outward, then swivelled to the side along with the front baskets while the back baskets are simultaneously moved into the cabinet opening Optional Soft & Silent Feature slows the pull-out just before final closure, creating automatic and silent closing Left swivelled Right swivelled mm (37 3/4" - 46") 390 x 470 mm (15 3/8 x 18 1/2") 415 mm (16 3/8") 525 mm (20 5/8") 474 mm (18 5/8") 390 x 470 mm 340 x 470 mm Approx. 730 mm (28 3/4") 80º Base corner unit system For inside height min. 525 mm (20 5/8"), epoxy-coated Slide: steel Right hand Left hand silver RAL Packing: 1 set (mounting template included) (mounting hardware not included) 881 minimum 500 mm (19 5/8") 300 mm (11 7/8") minimum 405 (16") Rear track frame is adjustable for cabinet width and is secured to side panels mm (17 7/8"-23 5/8") Soft & Silent Feature Material: plastic grey Packing: 1pc. Arena Plus Tray, with non-slip surface Basket dimensions: Width: 470 mm (18 1 / 2") Non Slip Height: 88 mm (3 1 / 2") Material: Shelf: melamine Surround: steel Depth white/chrome-plated 305 (12") white/chrome-plated 390 (15 3 / 8 ") maple/chrome-plated 305 (12") maple/chrome-plated 390 (15 3 / 8 ") Storage Baskets Basket dimensions: Width: 470 mm (18 1 / 2") Height: 85 mm (3 3 / 8") wire Depth chrome-plated 340 (13 3 / 8 ") (15 3 / 8 ") Set of 4 Baskets 4 baskets with two sizes per pair: Text 2 = 305 x 470 x 85 (12 x 18 1/2 x 3 3/8 ) Change 2 = 390 x 470 x 85 (15 13/8 x 18 1/2 x 3 3/8 ) wire chrome-plated Packing: 1 set Material: Shelf: melamine Surround: steel grey/chrome-plated [ ] Packing: 1 set New Item 50º

12 1/4 Turn Systems For use in corner cabinets To be mounted on a central upright 680 (26 7/8 ) min. 389 (15 3/8") 350 (13 7/8") 79 (3 1/8") from 400 (15 3/4 ) Half moon 1/4 revolving shelf Screw-mounted to central upright with a minimum cabinet height of 565 mm (22 1 / 4"). Material: plastic Post: steel white/chrome-plated Packing: 1 set (includes 2 shelves, post, 1 upper and 1 lower bearing, 1 follower and 1 rubber ring) Installation using a center upright minimum 32 mm x 32 mm (1 1/4" x 1 1/4" square) 47 (1 7/8") To adjust the height of the upper tray, press it firmly on the rubber ring which is positioned at the chosen height on the post. The follower (which is attached to the backside of cabinet door), is guided under the tray and pivots automatically to the exterior when the door is opening. Rubber ring for the upper tray positioning Post Upper bearing with cover 79 (3 1/8") 47 (1 7/8") 32 (1 1/4") Lower bearing Central upright (Customer supplied) wood. 882

13 1/4 Turn Systems Installation Using a 50 mm centre upright Drill hole 5 mm dia., 10 mm deep 1/4 Turn post, 495 mm (19 1 / 2") high with upper bearing to be screw-mounted to a centre upright, and lower bearing to be screw-mounted to the cabinet bottom. Material: Post: steel Bearings: plastic, white chrome-plated (Includes central post, shelf support ring, and bearings) /850 (29 1 /2"/33 1 /2") ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround. The ARENA Plus non-slip surface prevents stored items from sliding. Shelf follower for ARENA shelf /220 used for cabinets with doors. Allows the shelf to revolve automatically as the door opens. chrome-plated Shelf Protector for ARENA shelf /220. Clips onto metal profile. Material: plastic aluminum coloured (2 5/8") 27 (1 1/8") 27 (1 1 /8") 32 (1 1 /4") min. 475/525 (18 3 /4"/20 5 /8") Non Slip Half moon revolving shelf, ARENA Plus Material: Shelf: melamine Surround: steel Cabinet door width mm (inch) Dimensions : white/ chrome-plated 440 (17 1 / 4") 750 x 420 x 90 mm (29 1 / 2" x 16 1 / 2" x 3 1 / 8") 490 (19 1 / 4") 850 x 470 x 90 mm (33 1 / 2" x 18 1 / 2" x 3 1 / 8") : maple/ chrome-plated 440 (17 1 / 4") 750 x 420 x 90 mm (29 1 / 2" x 16 1 / 2" x 3 1 / 8") 490 (19 1 / 4") 850 x 470 x 90 mm (33 1 / 2" x 18 1 / 2" x 3 1 / 8")

14 1/4 Turn Systems Ordered separately as needed: from 440/490 (17 1 /4" / 19 1 /4") 750/850 (29 1 /2" / 33 1 /2) 77 min. 460/510 (18 1 /2" / 20") Half moon revolving shelf with spindle bearing and clamping sleeve. Bearing: plastic, white Cabinet door width Dimensions chrome-plated mm (inch ) 440 (17 1 / 4") 750 x 420 x 80 mm (29 1 / 2" x 16 1 / 2" x 3 1 / 8") 490 (19 1 / 4") 850 x 475 x 80 mm (33 1 / 2" x 18 3 / 4" x 3 1 / 8") (includes support ring and mounting pin) Shelf follower for half moon revolving shelf /247 used for cabinets with doors. Allows the shelf to revolve automatically as the door opens. Material: plastic aluminum coloured (16 3 /4") 782 (30 7 /8") 73,5 min. 485 (19 1 /8") Half moon wire fence 1/4 turn For wood shelves (customer supplied) Shelf revolves in bearing screw-mounted to centre upright., chrome-plated Bearing: plastic For cabinet door Dimensions width mm (inch) 425 (16 3 / 4") 779 x 425 x (30 5 / 8" x 16 3 / 4" x 4 1 / 8") Shelf follower For fence , used for base units with doors. Allows the shelf to revolve automatically as the door opens. chrome-plated Roller: plastic white Packing: 10 pcs. 884

15 Revolving Corner Unit Systems For attachment of wood (customer supplied) half moon revolving shelves to a central upright at any height. = = (19 5 /8") = approx. 570 (22 3 /8") = The pivot fitting, designed for left or right hand mounting, is screwed to the center upright at desired height. Runner stop The runner stop can be installed on either side. Revolving/extended system, epoxy-coated white (includes revolving element with shelf support arms, extension runners, and pivot fitting) 885

16 1/4 Turn Wire Shelf Corner Unit Systems Kitchen and Bath Organization 1/4 turn/extending wire shelf with fence, epoxy-coated For cabinet door width from Dimensions white mm ( inch) mm 425 (16 3/4 ) 770 x (19 5/16 ) 890 x (includes pivot fitting, follower roller and ball-bearing slide) The pivot fitting, which is designed for left or right hand mounting, is screwed to the centre upright at any desired height. Installed dimensions for minimum door width: 770 (30 5 /16") min. 485 (19 1 /8") 890 (35 1 /16") min. 540 (21 1 /4") from 425 (16 3 /4") 71 from 490 (19 5 /16") (24") 770 (30 5 /16") 4" 9" 5 7/8" Installation using a 60 mm centre upright (customer supplied). 2 4" door follower roller Shelves are delivered with a follower roller, that is screwed to the inside of the door, allowing the shelf to revolve as the door opens, from where it can be extended forward. The runner shelf is equipped with a screw mounted runner stop, that is to be installed on the outside of the runner shelf to stop the Runner stop shelf on the rotary point when it s pushed back. 886

17 Corner Pull-out for Blind Base Cabinets LeMans Kitchen and Bath Organization Full swing brings entire cabinet contents into the open Smooth combination of turning and swinging The door is opened. The top or bottom tray swings out. Illustration shows shelf swinging to the right. Tray moves completely out of the cabinet. Corner Pull-out Shelf, Arena Plus, with non-slip surface for cabinet from 900 mm (35 7/16 ) to 1,000 mm (39 3/8 ) Material: Shelf: melamine Surround: steel Cabinet Door Opening mm inch swing white/ maple/ grey/ chrome-plated chrome-plated chrome-plated (16 3/ /16 ) right left (18 3/ /16 ) right left (22 1/8-22 3/8 ) right left Packing: 1 set (2 trays) (order post separately) New Item Post, height adjustable with upper bearing, screw-mounted For Inside Height mm inch chrome-plated (23 5/8-29 1/2 ) (28 3/8-35 7/16 ) mm Door Opening 887 Image Change G B J A K H F C E D (inches) 450 (17 3/4 ) 500 (19 3/4 ) 600 (23 5/8 ) A 900 (35 7/16 ) 1000 (39 3/8 ) 1000 (39 3/8 ) B 500 (19 3/4 ) 500 (19 3/4 ) 500 (19 3/4 ) C D (16 3/ /16 ) (18 3/ /16 ) (22 1/8-22 3/8 ) (5/8-3/4 ) (5/8-3/4 ) (5/8-3/4 ) E 45 (1 3/4 ) 45 (1 3/4 ) 45 (1 3/4 ) F 450 (17 3/4 ) 500 (19 3/4 ) 600 (23 5/8 ) G 65 (2 9/16 ) 65 (2 9/16 ) 65 (2 9/16 ) H (23 5/8-35 7/16 ) (23 5/8-35 7/16 ) (23 5/8-35 7/16 ) J 25 (1 ) 25 (1 ) 25 (1 ) K 70 (2 3/4 ) 70 (2 3/4 ) 70 (2 3/4 )

18 Corner Systems LeMans - Kesseböhmer Full swing brings entire cabinet contents into the open Smooth combination of turning and swinging Maximum load per shelf: 65 lbs. Height of door hinge must be considered For inset doors, door opening must be dimension C - 1" for door clearance Maple Arena Plus shelves with Non-Slip surface Easily retrofitted into blind corners Shelves are height adjustable Maple/Champagne finish exclusive to Häfele America Co. Text Change Swings Right A Swings Left A B B C C Non Slip Corner Pull-out Shelf, Arena Plus Minimum inside cabinet height: 711 mm (28 ) Minimum door opening: 90º Material: Shelf: melamine Surround: steel Framed Cabinets Tray A B C swing maple/champagne / right left / right left / right left Packing: 1 set (2 trays, 2 posts) Lid rack, for Arena shelf New 450 x 150 x 40 Item ( x " x ") chrome-plated Text Change Frameless Cabinets Tray A B C swing maple/champagne / right left / right left / right left Packing: 1 set (2 trays, 2 posts) 888

19 Revolving Corner Systems Pie Cut Shelf Set For use in corner cabinets Easily installed, adjustable post Pre-drilled holes for easy door attachment A = thickness of tray r C C = pie of tray A B 1 7 /8" B = mounting surface to center of pole Adjustable post fits 23 1 /4" - 33" high cabinets. Material: Shelves: high impact polystyrene Post: steel Bearings: nylon Bottom support: steel, galvanized Size r=radius A B C white/chrome-plated 24" 12" 1 7 8" 1 1 2" " " 14" 1 7 8" 3 1 2" " Packing: 1 set (includes 2 trays and hardware) Kidney Shelf Set For use in corner cabinets with hinged door Trays rotate independently Lock-in position Easily installed, adjustable post 889 A = thickness of tray r C C = pie of tray A B 1 7 /8" B = mounting surface to center of pole Adjustable post fits 23 1 /4" 33" high cabinets. Material: Shelves: high impact polystyrene32" diamet Post: steel Bearings: nylon Size r=radius A B C white/chrome-plated 24" 12" 1 7 8" 2" 10" " 14" 1 7 8" 4" 10" " 16" 2 1 8" 4 1 8" " Packing: 1 set (includes 2 trays and hardware)

20 Revolving Corner Unit Systems For self made corner shelves Use with optional center post 820 (32 1 /4") 38 (1 1 /2") 82 (3 1 /8") 82 (3 1 /8") Cutout and hole for wood shelf Wire Surround Fence For screw mounting to three-quarter round, wood shelf (customer-supplied) For 900 x 900 mm (36 x 36") corner units Diameter: 810 mm (31 7 / 8") Height: 62 mm (2 1 / 2") chrome-plated Shelf support for mounting to post Supports three-quarter round, revolving wood shelf, epoxy-coated Bearing: plastic white (includes bearing and retaining pin) 11 (7/16") Wire fences are secured to wood shelves with raised head screws. 890

21 Revolving Corner Unit Systems Three-quarter Round Upper bearings Height adjustment bearing Post with lower mounting plate Upper drilling diagram 10 mm deep Ø5 Centre Post vertically adjustable 725 (28 9 / 16") to 765 mm (30 1 / 8") Accomodates 3 shelves Material: Post: steel Height-adjustable bearing: steel, galvanized Bearings: plastic chrome-plated/white (includes upper, lower, and vertical adjustment bearings) 891

22 Revolving Corner Unit Systems Three-quarter Round Three-quarter round, revolving wire shelf with wire surround Height: 80 mm (3 1 /8") For corner base units Diameter chrome-plated 800 x 800 (31 1 / 2" x 31 1 / 2") Ø 700 (27 9 / 16") x 900 (35 7 / 16" x 35 7 / 16") Ø 820 (32 5 / 16") (includes pin and self-centering cam) Three-quarter round ARENA Plus, with non-slip surface Height: 80 mm (3 1 /8") Material: Shelf: melamine Surround: steel Non Slip for corner base units Diameter white/chrome-plated 800 x 800 (31 1 / 2" x 31 1 / 2") Ø 700 (27 9 / 16") white/chrome-plated 900 x 900 (35 7 / 16" x 35 7 / 16") Ø 820 (32 5 / 16") maple/chrome-plated 800 x 800 (31 1 / 2" x 31 1 / 2") Ø 700 (27 9 / 16") maple/chrome-plated 900 x 900 (35 7 / 16" x 35 7 / 16") Ø 820 (32 5 / 16") (includes pin and self-centreing cam) ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround. The ARENA Plus non-slip surface prevents stored items from sliding Installed dimensions for corner base units 800 x 800 mm (31 1 /2" x 31 1 /2") Installed dimensions for corner base units 900 x 900 mm (35 7 /16 x 35 7 /16") 800 (31 1 /2") New Item Ø 700 (27 9 /16") min. 480 (19") 120 (4 3 /4") Lid rack, for Arena shelf 450 x 150 x 40 ( x " x "). chrome-plated (35 7 /16") New Item Ø 820 (32 5 /16") 90 (3 1 /2") 892 min. 510 (20 1 /8") Divider, for Arena shelf chrome-plated 320 x 320 x (12 5 8" x " x ") 370 x 370 x ( " x " x ")

23 Revolving Corner Systems Full Round For corner cabinet installations Durable nylon bearings Easy to install with adjustable post Full Round Shelf Sets Material: Shelf: high impact polystyrene Pedestal: steel Bearings: nylon Adjustable post fits 23 1 / 4" 33" for two tray sets. Adjustable post fits 27" 45" for three tray sets. Size Trays Post r=radius white/chrome-plated 18" / 4-33" 9" " " 9" " / 4-33" 10" " / 4-33" 12" " / 4-33" 14" " / 4-33" 16" Packing: 1 set (includes 2 or 3 trays and hardware) A Note: 32" diameter trays rotate independently - all other size trays rotate together. r Upper post bearing Adjusting element Shelf bearing Locking-pin Post with lower mounting plate 893

24 Revolving Corner Unit Systems Full Round Corner floor unit revolving systems with circular revolving shelves For cabinets with front-mounted diagonal doors Fixed center post Upper spindle bearing Upper height adjustment bearing Post Center post, vertically adjustable from 725 mm (28 1 / 2") to 765 mm (30 1 / 8") Accommodates 3 shelves Material: Post: steel Height adjustment bearing: steel Upper bearing: plastic chrome-plated/white (includes upper, lower and height adjustment bearings) 460 (18 1/8 ) Post with lower mounting plate 900 (35 1/2 ) min. 500 (19 3/4 ) ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround The ARENA Plus non-slip surface prevents stored items from sliding New Item Lid rack, for Arena shelf 450 x 150 x 40 ( x " x "). chrome-plated Ø750 (29 1/2 ) Circular revolving shelf with wire fence For cabinets 900 x 900 mm Dimensions: Ø 750 mm (29 1 /2"), 80 mm (3 1 /8") high chrome-plated (includes support and positioning device) Round Revolving Shelf, ARENA Plus Non For cabinets 900 x 900 mm Dimensions: Ø 750 mm (29 1 /2"), 80 mm (3 1 /8") high Material: Shelf: melamine Surround: steel white/chrome-plated maple/chrome-plated (includes support) New Item Slip Divider, for Arena shelf chrome-plated 320 x 320 x (12 5 8" x " x ") 370 x 370 x ( " x " x ") 894

25 Revolving Corner Systems Twister No center post, axle is offset to side allowing maximum storage Height adjustable axle with adjustable shelves Full Round Shelf Sets ø450 mm (17 3/4 ) Material: Shelf: melamine Surround: steel For inside cabinet height Shelves white/chrome-plated mm (20 3/4-25 1/8 ) mm (25 15/ /4 ) mm ( /16 ) Packing: 1 set (includes axle, bearing and 2 round shelves) D shelf sets ø500 mm (19 3/4 ) Material: Shelf: melamine Surround: steel For inside cabinet height Shelves white/chrome-plated mm (20 3/4-25 1/8 ) mm (25 15/ /4 ) mm ( /16 ) Packing: 1 set (includes axle, bearing and 2 D shelves) 600 (23 5/8") 600 (23 5/8") ø450 ø (23 5/8") R8 min. R (12 1/8") 600 (23 5/8") Ø8 min. R (11 5/8") 45 45º min. 267 min mm wall corner unit with 600 mm wall corner unit with round shelf 895

26 Revolving Corner Systems Mondo Mechanism is complete and pre-installed with shelves Curved door pushes in and revolves with the shelves The door closes flush Customized doors can be used (i.e. veneer laminate, etc.) Coordinates with Eclipse on the following page 610 (24") 394 (15 1/2") 914 (36") 914 (36") Mondo revolving corner cabinet with curved shaped door Width across corners: 914 x 914 mm (36 x 36 ) Side height: 774 mm (30 1/2 ) or 786 mm (31 ) Leg leveler height: 100 mm (4 ) Load capacity 20 kg (44 lbs.)/shelf Material: plastic/metal Leg levelers: plastic Side height white 774 mm (30 1/2 ) (includes cabinet, 2 shelves, 2 door holders, door brush profile and 7 leg levelers) Installation dimensions for curved door 780 (30 11/16") 769 (30 1/4") Curved Door 3.5 (3/16") 487 (19 3/16") Door type 769 mm (30 1/4 ) stainless steel plastic (customer 769 mm (30 1/4 ) supplied veneer) Chopping board for Mondo Finishes the corner when the countertop is L-shaped 90º. Material: solid beech Countertop Thickness 40 mm (1 5/8 ) (3 13/16) /2") 896

27 Base Cabinet Pull-Out Units Min. width 112 (4 7/16 ) New Item 495 (19 1/2 ) 490 (19 1/4 ) 15 (5/8 ) 88 (3 1/2 ) 200 (7 7/8 ) 150 (5 7/8 ) Minimum depth of cabinet 485 (19 1/8 ) 2-tier Base Cabinet Pull-out Full-extension slides with integrated self-closing action Installs on either right or left side Includes door mounting brackets Minimum inside width: 112 mm (4 7 / 16") D x W x H: 480 x 110 x 490 mm (18 7/8 x 4 5/16 x 19 5/16 ) chrome Under-sink storage unit installs left or right Dimensions: 230 x 470 x 405 mm (9" x 18 1 /2" x 16") 470 (18 1 /2") 405 (16") Lockable, pull-out compartment installs left or right Provides convenient access to cleaning supplies. Dimensions: 202 x 432 x 440 mm (8" x 17" x 17 3 /8") (9") 280 (11") 620 (24 1 /2") Extended length Color Item No. chrome-plated (includes screw-mounted upper and lower runners) Color Item No. chrome-plated (includes runners)

28 Base Cabinet Storage Systems With Soft & Silent Feature Integrated slide Acid resistant plastic trays Swivel basket can be pushed to the left or right Bottom-mounted Storage unit pull-out, 1 removable basket Dimensions: 161 x 495 x 395 (6 3 8 x " x ") chrome polished Packing: 1 set (includes base, 1 removable basket with handle, 4 dividers) Storage unit pull-out, 2 baskets (1 removable) Dimensions: 274 x 495 x 395 ( x " x ") chrome polished Packing: 1 set (includes base, 1 removable basket with handle, 1 basket without handle, 8 dividers) Storage unit pull-out, 3 baskets (1 removable) Dimensions: 274 x 495 x 395 ( x " x ") chrome polished Packing: 1 set (includes base, 1 removable basket with handle, 1 basket without handle, 1 swivel basket, 8 dividers) 898

29 Base Cabinet Storage Systems With Soft & Silent Feature Make the most of a narrow space Mounts on the right-hand side Slides are concealed under the metal trays Soft & Silent feature slows the pull-out just before final closure, creating automatic and silent closing Base cabinet pull-out system Min. 112 (4 1/2") Min. 495 (19 1/2") 256 (10 1/16") Left 50 (2") Right 440 (17 3/8") 2-tier base cabinet pull-out 45º Minimum inside cabinet width: 112 mm (4 1 /2") Minimum inside cabinet depth: 500 mm (19 5 /8") Minimum inside cabinet height: 580 mm (22 3 /4") W x D x H = 104 x 466 x 541 mm (4 1 /8" x 18 3 /8" x 21 1 /4") chrome-plated left right (includes textured surface metal trays and full extension slides) 45º/90º 45º/90º Min. 112 (4 1/2") Min. 481 (19") 256 (10 1/16") 36 (1 7/16") 440 (17 3/8") 2-tier base cabinet pull-out 90º Maximum load capacity: 12 kg. (26.4 lbs.) Minimum inside cabinet width: 112 mm (4 1 /2") Minimum inside cabinet depth: 481 mm (19 ") Minimum inside cabinet height: 540 mm (21 1 /4") Hole centers: 380 mm (15") chrome-plated (includes textured surface metal trays and full-extension slides) Min. 112 (4 1/2") Min. 481 (19") 256 (10 1/16") 36 (1 7/16") 440 (17 3/8") 3-tier base cabinet pull-out 90º Maximum load capacity: 12 kg. (26.4 lbs.) Minimum inside cabinet width: 112 mm (4 1 /2") Minimum inside cabinet depth: 481 mm (19 ") Minimum inside cabinet height: 755 mm (29 3 /4") Hole centers: 595 mm (23 3 /8") chrome-plated (includes textured surface metal trays and full-extension slides) 899

30 Base Cabinet Storage Systems With Soft & Silent Feature Organize your baking trays, serving trays, or cutting boards Dampening slide slows the pull-out just before final closure, creating automatic and silent closing Make the most of a narrow space Mounts on the right-hand side Base Pull-Out Baking Tray 90º 380 (15") 590 (23 1/4") Min. 112 (4 1/2") Min. 481 (19") 256 (10 1/16") 36 (1 7/16") 440 (17 3/8") Maximum load capacity: 12 kg. (26.4 lbs.) Minimum inside cabinet width: 112 mm (4 1 /2") Minimum inside cabinet depth: 481 mm (19 ") Minimum inside cabinet height: 590 mm (23 1 /4") Hole centers: 380 mm (15") Complete with full-extension self-closing slides chrome-plated Base Pull-Out Towel Rail 90º 380 (15") 590 (23 1/4") Min. 112 (4 1/2") Movable Divider, for use on bottom tray Min. 481 (19") 256 (10 1/16") 36 (1 7/16") 440 (17 3/8") Maximum load capacity: 12 kg. (26.4 lbs.) Minimum inside cabinet width: 112 mm (4 1 /2") Minimum inside cabinet depth: 481 mm (19 ") Minimum inside cabinet height: 590 mm (23 1 /4") Hole centers: 380 mm (15") Complete with full-extension self-closing slides chrome-plated ; Clip holder: plastic, black chrome-plated

31 Base Cabinet Pull-Outs With Soft & Silent Feature Soft & Silent feature slows the pull-out just before final closure, creating automatic and silent closing 27 (1 1/8") A variety of baskets to choose from H Left Right 375 (14 3/4") 247 (9 3/4") 23 (7/8") 465 (18 3/8") 28 (1 1/8") Full Extension Frame Inside cabinet depth: minimum 485 mm (19 1 / 8") Inside cabinet width: basket width + 33 mm (1 5 / 16"), epoxy-coated Inside cabinet Frame Left Right Height min. height mm (inch) mm (inch) silver RAL ( ) 497 ( ) ( ) 597 ( ) ( ) 661 (26 ) Front Bracket 90º, for base unit pull-outs, epoxy-coated silver RAL ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround. The ARENA Plus non-slip surface prevents stored items from sliding. 901 Storage Basket ARENA Plus, with non-slip surface Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 88 mm (3 1 / 2") Material: Shelf: melamine Surround: steel Non Slip Width mm (inch) (4 3 / 8") (6 1 / 4") (9") (12") white/ chrome-plated maple/ chrome-plated Storage Basket Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 75 mm (3") Width mm (inch) chrome-plated 110 (4 3 / 8 ) (6 1 / 4 ) (8 1 / 4 ) (12 1 / 2 )

32 Base Cabinet Pull-Outs With Soft & Silent Feature Soft & Silent Feature slows the pull-out just before final closure, creating automatic and silent closing 27 (1 1/8") A variety of baskets to choose from H Right 407 (16") 279 (11") Left 479 (18 7/8") 55 (2 3/16") 45º Full Extension Frame 55 angle baskets Inside cabinet depth: 505 mm (19 7 8") Inside cabinet width: basket width + 33 mm (1 5 / 16") 45 angle baskets Inside cabinet depth: 515 mm (20 1 / 4") Inside cabinet width: basket width + 33 mm (1 5 / 16") Frame Dimensions Depth: 480 mm (18 1 / 2") Width: 37 mm (1 1 / 2"), epoxy-coated Inside cabinet Frame Left Right Height min. height mm (inch) mm (inch) silver RAL ( ) 497 ( ) ( ) 597 ( ) ( ) 661 (26 ) (15 5/8") 268 (10 1/2") 470 (18 1/2") 44 (1 3/4") 55º ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround The ARENA Plus non-slip surface prevents stored items from sliding Front Bracket, for diagonal base unit pull-outs., epoxy-coated Angle silver RAL º º Storage Basket, for diagonal base unit pull-outs. Size: 228 x 467 x 74 mm (9" x 18 3 /8" x 2 7 /8") (width x depth x height), epoxy-coated For chrome-plated Angle 55º right left º right left Storage Basket ARENA Plus, for diagonal base unit pull-outs, with non-slip surface. Size: 228 x 470 x 88 mm (9" x 18 1 /2" x 3 1 /2") (width x depth x height) Material: Shelf: melamine Surround: steel For Angle 55º 45º right left right left white maple Non Slip 902

33 Base Cabinet Pull-Outs Self-Closing Left Right Optional front brackets 370 (14 1/2") 242 (9 1/2") Ø (18 3/8") 18 (11/16") Base Unit Pull-Out Frame Inside cabinet width:basket width + 33 mm (1 1 / 4") Inside cabinet depth: min. 500 mm (19 3 / 4") Depth: 480 mm (18 1 / 2") Width: 37 mm (1 1 / 2"), epoxy-coated Full extension Inside cabinet Height Left Right Height min. frame mm (inch) silver, RAL ( ) 508 mm (24 ) 608 mm ( ) 676 mm Front Bracket, epoxy-coated silver Angle RAL ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround The ARENA plus non-slip surface prevents stored items from sliding 903 Storage Basket ARENA Plus, with non-slip surface Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 88 mm (3 1 / 2") Material: Shelf: melamine Surround: steel Non Slip Width mm (inch) (4 3 / 8") (6 1 / 4") (9") (12") white/ chrome-plated maple/ chrome-plated Storage Basket Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 75 mm (3") Width mm (inch) chrome-plated 110 (4 3 / 8 ) (6 1 / 4 ) (8 1 / 4 ) (12 1 / 2 )

34 Base Cabinet Pull-Outs Self-Closing Base unit pull-out frame 55 angle baskets Inside cabinet width: 268 mm (10 1 / 2") Inside cabinet depth: 500 mm (19 3 / 4") 45 angle baskets Inside cabinet width: 262 mm (10 3 / 8") Inside cabinet depth: 525 mm (20 5 / 8") Frame Dimensions: Depth: 480 mm (18 1 / 2") Width: 37 mm (1 1 / 2") Left Right 418 (16 1/2") 290 (11 3/8") 397 (15 5/8") 269 (10 5/8") 479 (18 7/8") 66 (2 5/8") 45º 467 (18 3/8") 45 (1 3/4") 55º, epoxy-coated Inside cabinet Frame Left Right Height min. height mm (inch) mm (inch) silver RAL ( ) 497 ( ) ( ) 597 ( ) ( ) 661 (26 ) Number Change Front Bracket, epoxy-coated silver Angle RAL ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround. The ARENA Plus non-slip surface prevents stored items from sliding. Storage Basket Size: 228 x 467 x 74 mm (9" x 18 3 /8" x 2 7 /8") (width x depth x height) For Angle chrome-plated 55º right left º right left Storage Basket ARENA Plus, with non-slip surface. Size: 228 x 470 x 88 mm (9" x 18 1 /2" x 3 1 /2") (width x depth x height) Material: Shelf: melamine, Surround: steel Non Slip For Angle 55º 45º right left right left white/ chrome-plated maple/ chrome-plated

35 Base Cabinet Storage Systems With Follower Mechanism - Kesseböhmer New Item For minimum interior width of 562 mm (22 1/8 ) Follower mechanism pulls out the baskets automatically Pull-out shelf, with frame for clip-on baskets Includes ball-bearing slides Dimensions: W x D x H 530 (20 7 /8 ) x 325 (12 3 /4 ) x 600 (23 5 /8 ), epoxy-coated silver RAL Clip-on basket, for pull-out shelf Dimensions: W x D x H 505 (19 7 /8 ) x 308 (12 1 /8 ) x 74 (2 7 /8 ) chrome-plated A Door frame, with follower Dimensions: W x D x H 540 (21 1 /4 ) x 150 (6 ) x 605 (23 13 /16 ) chrome-plated Clip-on basket, for door frame Dimensions: W x D x H 160 (6 5 /16 ) x 470 (18 1 /2 ) x 75 (2 15 /16 ) chrome-plated

36 Base Cabinet Pull-Out System Organizer system allows items to be kept in order Mounts on side wall of cabinet, left or right mounting Ball bearing full extension slides For installation behind hinged doors Complete with spacer blocks to space out to 31 mm (1 1 4 ) With one deep tray, one divider tray, and one small tray with three adjustable hooks Depth: 490 mm ( ) Width: 158 mm (6 1 4 ) Height: 481 mm ( ) Material: aluminum silver coloured anodized Packing: 1 set With one small tray, and one double bar with three adjustable hooks Depth: 490 mm ( ) Width: 158 mm (6 1 4 ) Height: 481 mm ( ) Material: aluminum silver coloured anodized Packing: 1 set 905 With one deep tray, two short trays, three fixed hooks, and three adjustable hooks Depth: 490 mm ( ) Width: 158 mm (6 1 4 ) Height: 481 mm ( ) Material: aluminum silver coloured anodized Packing: 1 set

37 Base Cabinet Storage Drawers Wire fence, with front brackets to attach drawer front Mounted to drawer bottom, front and rear panel (not supplied) 500 x 136 (19 3 / 4 x 5 3 / 8") chrome-plated Packing: 1 pair (without drawer runners) Wire fence, with screw-eyes to secure drawer front and rear panel Used on a concealed, inner drawer 500 x 136 (19 3 / 4 x 5 3 / 8") chrome-plated Packing: 2 pcs ( 5 /8") Mounting procedure: 1. Cut drawer base and rear panel to size, making allowance for intended drawer runner type. 2. Secure fence to drawer bottom with raised head screws. 3. Secure fence to rear panel. The latter must be secured to the drawer bottom with at least 2 screws to prevent twisting. 4. In case of concealed inner drawers with fence , both drawer fronts and rear panels should be secured as in point 3 above. 5. Secure mounting bracket to drawer front to connect with 3-D bracket on fence. 6. Install and adjust drawer front. Fence Pan head screws pages Fence Pan Head #8 Pan head screws (5 1 /8") Vertical adjustment screw Horizontal adjustment and fastening screw Tilt adjustment screw 906

38 Wire Basket Pull-Out Storage System 550 (21 5 /8") Overall Width 110 (4 1 /2") Basket attachment bracket (5/16") 8* 110 (4 3/8") Wire basket pull-out storage system sets Cabinet depth min. 550 mm (21 5 / 8") Load capacity: 20 kg (44 lbs.) Soft-roller extension length: 447 mm (17 5 / 8") /steel-wire, epoxy-coated Brackets and spacers: plastic Installation width* Overall width white mm inch mm inch / / / / Packing: 1 set (includes 1 basket, 1 pair soft-roller drawer runners, 8 brackets with screws, 3 spacers,15 mm thick) 12 (15/32") System installed width* 12.5 (1/2") 6 (1/4") 7 (9/32") * Installed width without spacers. The spacers permit the system installation width to be expanded on each side from 3 mm to 21 mm (max.) Optional bottom-mount bracket For soft-roller drawer slides 4 each required per basket, epoxy-coated white Packing: 1 set (4 pcs. with screws) Stackable spacers, for adequate clearance of the projecting door hinges on the hinge-side of the cabinet 907 ø Ø 20.5 Material: plastic Cap thickness white 4 mm mm mm mm Packing: 100 pcs. Total spacer thickness not to exceed 21 mm

39 Base Cabinet Storage Drawers Internal Drawer Baskets 135 (5 3/8") External panel width Internal drawer basket Low front for easy access Includes full-extension ball-bearing slides, with self-closing action Load carrying capacity: 30 kg (66 lbs) Installation depth: 505 mm (19 7 / 8") Basket dimensions: Depth: 500 mm (19 3 / 4") Height: 127 mm (5") Material: Body: steel Slides: steel, galvanized Inside VARIANTA 5 cabinet width Basket width chrome-plated 368 (14 1 / 2") 345 (13 5 / 8") (16 1 / 2") 395 (15 1 / 2") (18 3 / 8") 445 (17 1 / 2") (22 3 / 8") 545 (21 1 / 2") Packing: 1 set 18 (3/4") (5/8"-3/4") Section view from the front ARENA is the result of a manufacturing technology that seals melamine material with a polished chrome surround. The ARENA plus non-slip surface prevents stored items from sliding. 135 (5 3/8") 18 (3/4") (5/8"-3/4") External panel width Section view from the front Varianta screws page 311 Internal drawer basket ARENA Plus With non-slip surface Includes full-extension ball-bearing slides, with self-closing action Basket dimensions: Depth: 488 mm (19 1 / 4") Height: 125 mm (4 7 / 8") Material: Shelf: melamine Surround: steel Slides: steel, galvanized Non Slip Inside cabinet Basket width width white/ maple/ maple/ chrome-plated chrome-plated champagne 368 (14 1 / 2") 352 (13 7 / 8") (16 1 / 2") 402 (15 7 / 8") (18 3 / 8") 452 (17 3 / 4") (22 3 / 8") 552 (21 3 / 4") Packing: 1 set 908

40 Cabinet Accessories Kesseböhmer New Item Perfect for aluminum framed glass doors. Adds contemporary flair to open shelving. 908 A Metal Storage Racks Inside cabinet width chrome-plated 16 mm ( 5 8") 19 mm ( 3 4") side panels side panels Width Depth Depth mm inch mm inch mm inch 260 mm (10 1 4") 490 mm (19 1 4") 418 (16 1 2") 412 (16 1 4") 407 (16") (18 3 8") 462 (18 1 4") 457 (18") (22 3 8") 562 (22 1 8") 557 (21 7 8") (30 1 4") 762 (30") 757 (29 3 4") (34 1 8") 862 (34") 857 (33 3 4") (38 1 8") 962 (37 7 8") 957 (37 5 8") (46") 1162 (45 3 4") 1157 (45 1 2") Packing: 2 pcs. (includes plastic rack supports and screws) The rack supports fit cabinet side panel thickness of 16 and 19 mm (5/8" and 3/4"). They also function as safety clips during transport.

41 Wicker Basket For framed or frameless 15" or 18" cabinets Install in or between two cabinets Baskets are woven over solid beech frames which slide on runners (sold separately) For installation, calculate frame width less 6 mm (1/4") for ease of use of runners 16 mm (5/8") H W D Wicker Baskets with beech frame Two handles drilled into frame (Order runners separately) Material: Wicker basket: natural, dipped Frame: beech, lacquered Flat Head #8 Width Depth Height Dimension W Dimension D Dimension H 287 mm (11 5 / 16") 540 mm (21 1 / 4") 200 mm (7 7 / 8") mm (14 5 / 16") 540 mm (21 1 / 4") 200 mm (7 7 / 8") B A 6 B A For 15" framed cabinets Basket Runner For 18" framed cabinets Basket Runner Runners for wicker baskets Material: beech, lacquered Dimension A Dimension B 34 mm (1 3 / 8") 25 mm (1") mm (1 5 / 8") 31 mm (1 1 / 4") Packing: 1 pair For 15" frameless cabinets Basket Runner For 18" frameless cabinets Basket Runner Flat head screws pages

42 Wicker Baskets Made from European wickers of natural brown colour Hand-woven Wicker Basket, free standing Material: wicker W x D x H natural brown H D W 240 x 240 x (9 1 2" x 9 1 2" x 7 3 4") 250 x 250 x (9 3 4" x 9 3 4" x 9 3 4") 340 x 240 x (13 3 8" x 9 1 2" x ") H D W Wicker Basket, free standing Material: wicker W x D x H natural brown 287 x 540 x (11 1 4" x " x 7 3 4") 363 x 540 x (14 1 4" x " x 7 3 4") Boards are finished with vegetable oil Groove carved along edge to avoid spills Use runners to install along with framed baskets from page 909 W D Chopping Board 2 handles 4 supports/grips Material: beech, oiled W x D x H 363 x 540 x (14 1 4" x " x 3 4") * * is stamped with a fish symbol to be used for seafood. 910

43 Pantry Organization Pantry Pull-out Unit with Soft & Silent Feature Maximum width of cabinet: 597 (23 5/8") Storage basket options on pages B 375 (14 3/4") 495 (19 1/2") A A Full extension pantry frame - height adjustable, epoxy powder-coated Cabinet width Installed height silver Ral 9006 champagne " /4"-63" " "-78 3 /4" " /4"-90 1 /2" " /4"-63" " "-78 3 /4" " /4"-90 1 /2" Packing: 1 set (includes front frame, front fixing brackets and centre frame) Extension runner B must be ordered separately. Installed dimensions: Depth: minimum 500 mm (20") Height: mm (47 1 /4" - 63") mm (63" /4") mm (74 3 /4" /2") Width: 260 mm (10 1 /4") to 360 mm (14 1 /8") B Full extension runner shallow height, epoxy powder-coated silver RAL Text [champagne] ] Change (includes upper and lower runners) 475 (18 11/16") 71 (2 3/4") 225 (325) (8 7/8) (12 3/4") 25 (1") Extended length 470 (18 1 /2") 500 (20") B Text Change Stabilizer bar For attachment to framed doors., epoxy-coated 250 mm 350 mm (9 3/4 ) (13 3/4 ) silver RAL [champagne] ] Soft & Silent Feature, for top slide Clips onto pantry (no tools required) Material: plastic grey Soft & Silent Feature, for bottom slide Material: plastic grey grey Packing: 10 pcs. 911 Text Change Text Change Front stabilizer Can be secured anywhere to the support frame., epoxy-coated silver RAL [champagne] ] Basket Holder To be used as add-on hooks when pantry frame height is extended. Height: 125 mm (5"), epoxy-coated silver RAL [champagne] ] Packing: 1 set (2 pcs.)

44 Pantry Organization Swing Pantry Pull-Out Unit Swing pantry allows for easy front access of stored contents Swings left or right Minimum of 375 mm (14") clearance required to adjacent wall Minimum of 650 mm (25 5/8") clearance required for door extension Storage basket options on pages Clearance required for corner installation B 375 (14 3/4") 495 (19 1/2") Pantry Pull-out swing unit with integrated soft & silent feature Installed dimensions: Depth: minimum 500 mm (20") Width: minimum 262 mm (10 5 /16") C D A Extension runner B, Front bracket C, and Stabilizer bar D must be ordered separately. A Pantry frame Consists of telescopic frame with hooks and front panel connector strips., epoxy-coated Installed height mm inch silver RAL /4" /8" /8" - 63" " /8" /8" - 78" " /8" Packing: 1 set Max. 70 mm (2 3/4") Min. 375 mm (14") Max. 70 mm (2 3/4") Min. 650 mm (25 5/8") 225 (325) (8 7/8) (12 3/4") B Full extension runner Consists of upper runner with integrated soft & silent feature and lower runner with integrated turn feature. Maximum capacity: 70 kg. (154 lbs.), epoxy-coated silver RAL Front stabilizer Can be secured anywhere to the support frame. For panel (slab) door attachment., epoxy-coated silver RAL C 25 (1") 475 (18 11/16") 500 (20") Extended length 538 (21 1/16") 89 (3 1/2") D Stabilizer bar - optional For attachment to tall doors., epoxy-coated Width silver RAL mm (9 3 /4") mm (13 3 /4") B C Front bracket Required for attachment to top and bottom of pantry frame., epoxy-coated, silver RAL 9006 For Cabinet Width Bracket Width silver RAL mm (9 3 /4") mm (13 3 /4") mm (19 11 /16") Packing: 1 set (2 pcs. required per frame). Basket holder To be used as add-on hooks when pantry frame height is extended. Height: 125 mm (5"), epoxy-coated silver RAL Packing: 1 set (2 pcs.) 912

45 Storage Baskets Recommended number of storage baskets. Installation height Number of baskets ( ) ( ) ( ) ( ) ( ) (77-96 ) ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround. The ARENA Plus non-slip surface prevents stored items from sliding. Non Slip Storage Basket ARENA Plus, with non-slip surface Material: Shelf: melamine Surround: steel Cabinet width W x D x H white/ maple/ chrome-plated chrome-plated 300 mm (11 3 4") 250 x 450 x (9 3 4"x " x 4") 400 mm (15 3 4") 350 x 450 x (13 3 4"x " x 4") 450 mm (17 3 4") 400 x 450 x (15 3 4"x " x 4") Storage basket, hook-on Cabinet width W x D x H chrome-plated 300 mm (11 3 4") 250 x 467 x (9 3 4" x " x 4 1 4") 400 mm (15 3 4") 350 x 467 x (13 3 4" x 18 1 /2" x 4 1 4") 913 Storage shelf, for storage basket Material: plastic Cabinet width W x D x H white RAL mm (11 3 4") 238 x 450 x (9 3 8" x " x 1 2") 400 mm (15 3 4") 338 x 450 x (13 1 4" x " x 1 2") Crossbar and end clips, for use with storage baskets Material: End clips: plastic Bar: steel, epoxy-coated or plated Cabinet width chrome-plated/black 250 mm (9 3 4") mm (15 3 4")

46 Storage Baskets Customer provides wood liner to be installed in the shelf support. The required dimensions are: 249 mm x 419 mm x 16 mm (9 3 4 x x 5 8 ) Basket clip holds baskets on pantry pull-out during shipping Recommended number of storage baskets. installation height Number of baskets ( ) ( ) ( ) ( ) ( ) ( ) Shelf support, hook-on Cabinet width W x D x H chrome-plated 300 mm (11 3 4") 250 x 460 x (9 7 8 x x ) 400 mm (15 3 4") 350 x 460 x (13 3 4" x " x 4 1 4") Basket clip, for storage baskets Material: plastic transparent Packing: 10 pcs. Storage Containers For Pantry Pull-out Units and Practical and decorative storage made from high quality, translucent plastic Container Set, with lids Capacity: 1.2 liters (1.25 quarts) Material: Container: plastic, translucent w/grey lid Support: steel, epoxy-coated silver RAL 9006 L x D x H 90 x 108 x 190 silver RAL (3 1 /2" x 4 1 /4" x 7 1 /2") champagne Packing: 1 set (includes support element, 4 containers) Container Set, open Material: Container: plastic, translucent Support: steel, epoxy-coated silver RAL 9006 L x D x H 210 x 120 x 120 silver RAL (8 1 /4" x 4 3 /4" x 4 3 /4") champagne Packing: 1 set (includes support element, 2 containers, 1 divider) 914

47 Pantry Organization Single Extension - Kesseböhmer New Item Pantry Pull-out, height adjustable Single extension, hooks on one side Left or right mounting to upper and bottom panel Weight capacity 40 kg. (88 lbs.) Inside cabinet depth: 500 mm (19 3/4 ) Height: 1160 mm (45 3/4 ) mm (58 7/8 ), epoxy-coated silver RAL ARENA is the result of a manufacturing technology that seals melamine material with a polished chrome surround The ARENA Plus non-slip surface prevents stored items from sliding 914 A Storage Basket ARENA Plus, with non-slip surface Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 88 mm (3 1 / 2") Material: melamine shelf with steel, chrome-plated surround Non Slip Width mm (inch) / (4 3 / 8") (6 1 / 4") (9") (12") white/ chrome-plated maple/ chrome-plated Storage Basket Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 75 mm (3") Width mm (inch) chrome-plated 110 (4 3 / 8 ) (6 1 / 4 ) (8 1 / 4 ) (12 1 / 2 )

48 Chef s Pantry Frame must always mount on the right 110 opening angle hinge required Chef s Pantry Pull-Out Frame Inside height: from 1100 mm (43 5/16 ), 4 shelves from 1700 mm (67 ), 6 shelves Inside depth: minimum 500 mm (19 3/4 ), epoxy-coated Height Cabinet width silver RAL mm 450 mm (17 3/4 ) (43 5/16 ) 500 mm (19 3/4 ) mm (23 5/8 ) mm 450 mm (17 3/4 ) (67 ) 500 mm (19 3/4 ) mm (23 5/8 ) Load capacity: Minimum inside cabinet width: pull-out shelf 50 kg. (110 lbs.) 450 mm (17 3/4 ) door shelf 20 kg. (44 lbs.) 412 mm (16 3/16 ) pull-out shelf 50 kg. (110 lbs.) 500 mm (19 3/4 ) door shelf 20 kg. (44 lbs.) 462 mm (18 3/16 ) pull-out shelf 60 kg. (132 lbs.) 600 mm (23 5/8 ) door shelf 25 kg. (55 lbs.) 562 mm (22 1/8 ) 915 Closed Open

49 Chef s Pantry Weight of door is supported by brackets that attach to side panel Door shelf, for left and right door mounting Inside height: 1100 mm (43 5 / 16"), 4 shelves 1700 mm (67 ), 6 shelves Height Cabinet width chrome polished 1100 mm 450 mm (17 3/4 ) (43 5/16 ) 500 mm (19 3/4 ) mm (23 5/8 ) mm 450 mm (17 3/4 ) (67 ) 500 mm (19 3/4 ) mm (23 5/8 ) Door shelf, ARENA Plus, for left and right door mounting Inside height: 1100 mm (43 5 / 16"), 4 shelves; Shelves: melamine 1700 mm (67 ), 6 shelves Height Cabinet width chrome polished/ maple 1100 mm 450 mm (17 3/4 ) (43 5/16 ) 500 mm (19 3/4 ) mm (23 5/8 ) mm 450 mm (17 3/4 ) (67 ) 500 mm (19 3/4 ) mm (23 5/8 ) ARENA is the result of a manufacturing technology that seals melamine material with a polished chrome surround The ARENA Plus non-slip surface prevents stored items from sliding Non Slip Storage Basket, for pull-out frame Depth x height: 275 mm x 80 mm (10 7 / 8" x 3 1 / 4") Cabinet width chrome polished 450 mm (17 3 / 4") mm (19 3 / 4") mm (23 5 / 8") Packing: 2 pcs. Storage Basket ARENA Plus for pull-out frame, with non-slip surface Depth x height: 275 mm x 88 mm (10 7 / 8" x 3 1 / 2") Material: Shelf: melamine Surround: steel Cabinet width maple/chrome-plated 450 mm (17 3 / 4") mm (19 3 / 4") mm (23 5 / 8") Packing: 2 pcs. 916

50 Gourmet Pantry Unit Large storage capacity in a small space Baskets individually height adjustable Fits cabinets with: Inside width: 862 mm (34") Inside height: 1270 mm (50") Inside depth: 500 mm (19 11 / 16") Ordering suggestion: 1 set Gourmet pantry / pcs. Baskets, large pcs. Baskets, small Frames Set 2 swivel frames 2 extension frames 2 upper runners with stop 2 lower runners 2 upper bearing brackets 2 lower bearing brackets with ball-bearings 2 upper and 2 lower lever arms 2 upper and 2 lower safety covers 2 door catches for the swivel frames 4 door rails, 1130 mm, and all accessories for the assembly., epoxy-coated silver Packing: 1 set Screws are not included Storage baskets, for swivel and extension frames. Size: (W x D x H) 368 x 205 x 82 mm chrome-plated Storage basket, for standard rails. Size: (W x D x H) 300 x 75 x 75 mm chrome-plated Note: Please use door hinges with 125º opening angle. 917 Flat Head #6 862 (34") 395 (15 9 /16") 40 (1 9 /16") Flat Head #8 500 (19 11 /16") 70 (2 3 /4") Pan Head #9 Function: Doors opened Swivel frame turns out, extension frame pulls forward automatically. Flat head screws pages Pan head screws pages

51 Pull-Out Storage Units Corner Unit Set New Item Door frame Hanging frame Storage basket 305/370 (12 /14 5/8 ) Depending on cabinet front width Adapter 375/425/525 plate 336 (13 1/4 ) z 450/430 (17 3/4 /16 7/8 ) x Door strike side x = 22.5 mm (7/8 ) + door overlap z = 106 mm (4 3/16 ) + door overlap 465 (18 5/16 ) 435 (17 1/8 ) Photos and drawings show right hand version Door frame follower 76 (3 ) Back frame Soft-close dampener 85 (3 3/8 ) Door panel plate 475 (18 11/16 ) Complete Corner Storage Unit Set, with pull-out action Minimum built-in depth: 490 mm (19 5/16 ) for cabinets 900 mm (35 7/16 ) wide Minimum built-in height: 530 mm (20 7/16 ) Designed so that rear baskets automatically follow front baskets when door is pulled away from the cabinet The pull-out cabinet automatically swings until it reaches maximum swing position Automatic pull-out action Door panel plates are 3-way adjustable for 450 (17 3/4 ) and 600 mm (23 5/8 ) door widths) Material: Hanging frame, door frame, back frame, & door follower: steel, tubular epoxy-coated Door panel plates: steel, epoxy-coated silver Storage baskets: steel, chrome-plated Left hand set Right hand set Packing: 1 set (includes 1 hanging frame, 1 door frame, 1 back frame, 1 door frame follower, 4 door panel plates, 1 door frame follower, [4] mesh wire storage baskets, mounting hardware and instructions) Text Change *Note: Soft & Silent feature included in the door frame follower and the back frame. 917 A

52 Pull-Out Storage Units For Twin Corner Cabinets New Item Pull-Out Shelving Unit Minimum built-in depth: 490 mm (19 5/16 ) Left or right handed Designed so that the pull-out section automatically begins to pivot as the unit is being pulled out of the cabinet Material: Pull-out and pivot mechanism: steel Shelves: Base: wood, laminated; : white Surround: steel, chrome polished For cabinet width For door width Left hand Right hand 900 mm (35 7/16 ) 450 mm (17 3/4 ) mm (39 3/8 ) 500 mm (19 3/4 ) mm (47 1/4 ) 600 mm (23 5/8 ) Packing: 1 set (includes 2 shelves, 1 pull-out and pivoting mechanism, mounting hardware and instructions) 917 B Min 90 mm for a 490 mm (3 9/16 ) (19 5/16 ) Right hand version shown

53 Pull-Out Storage Units New Item Pull-Out Frame Minimum installation depth: 495 mm (19 1/2 ) Left or right handed, epoxy-coated silver Packing: 1 set (includes 1 pull-out frame 90º, 1 soft-close dampener, and mounting hardware) 581 (22 7/8 ) 472 (18 5/8 ) 450 (17 3/4 ) Top Bottom 230 (9 1/8 ) 470 (18 1/2 ) 80 (3 1/8 ) Storage Basket Set 900 Minimum installation depth: 495 mm (19 1/2 ) Left or right handed Material: Basket: steel, heavy gauge, chrome-plated Clips & door hanging plates: steel, zinc-plated Base 85 mm (3 3/8 ) mm (5 3/16 ) mm (9 1/16 ) Packing: 1 set (includes 2 storage baskets, 4 basket securing clips, and 2 door hanging plates) 917 C

54 Pull-Out Storage Units Pantry Unit with Soft & Silent Feature Hanging frame Top runner B New Item Storage basket E Door mounting bars D Basket hanging clip Storage basket C A Hanging frame 85 (3 3/8 ) 250 (9 7/8 ) 350 (13 3/4 ) 450 (16 3/4 ) 550 (21 5/8 ) 430 (16 7/8 ) Open Closed Front panel Front panel Pantry Unit Complete 0D0 0Minimum built-in depth: 475 mm (18 11/16 ) Choice of 6 heights and 4 cabinet widths Centre mounting, height adjustable, full extension Door panel plates are 3 way adju0d0 0 Material: Hanging frame, door panel mounting bar, & door hanging plate: steel, epoxy-coated Top and bottom runners: steel, zinc-plated; Storage baskets: steel, chrome-plated Basket hanging clip: plastic; : grey Packing: 1 set (includes 1 hanging frame, 1 top and 1 bottom runner, 1 height adjustable hanging frame, basket hanging clips, 2 door mounting bars, 1 soft close dampener, storage baskets, mounting hardware and instructions) 917 D Door hanging plate Bottom runner 465 (18 3/8 ) 475 (18 3/4 ) Installed height (37 3/8 47 1/4 ) (47 1/4 57 ) (57 67 ) ( /4 ) (74 3/4 84 5/8 ) (84 5/8 92 1/2 ) For cabinet width Basket width 300 mm (11 13/16 ) 250 mm (9 7/8 ) mm (15 3/4 ) 350 mm (13 13/16 ) mm (19 11/16 ) 450 mm (17 3/4 ) mm (23 5/8 ) 550 mm (21 11/16 ) A Hanging frame 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Parts included in pantry unit sets, according to installed height required. F B Top & bottom runners 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. C Storage basket 3 pcs. 4 pcs. 4 pcs. 5 pcs. 5 pcs. 7 pcs. D Basket hanging clip 6 pcs. 8 pcs. 8 pcs. 10 pcs. 10 pcs. 14 pcs. E Door mounting bar 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. F Door hanging plate 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. B

55 Pull-Out Storage Units Swing-Out Pantry Unit with Soft & Silent Feature Top runner New Item Door follower Door mounting frame Door frame mounting arm Hanging frame Door frame support hinges Standard door version: baskets 400 mm (15 3/4 ) wide Door frame mounting arm Basket securing clip Door mounting frame Basket hanging clip Door frame support hinges Closed Open Swing-Out Pantry Unit Minimum built-in depth: 480 mm (18 7/8 ) for cabinets 900 mm (35 7/16 ) wide Choice of 7 heights and 3 cabinet widths Sets with cabinet with framed doors also include 4 spacers for use with door frame support hinges Centre mounting, height adjustable, full extension Attach the storage baskets onto the frame by using hanging clips, and secure with the securing clips 350 mm (13 3/4 ) baskets included in door frame version sets Spacers included for door frame version only Soft & Silent feature included See ordering information on page 917 F Installed height (25 5/8 37 3/8 ) (37 3/8 47 1/4 ) (47 1/4 57 ) (57 67 ) ( /4 ) (74 3/4 84 5/8 ) (84 5/8 92 1/2 ) Hanging frame 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Door mounting frame 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Top and bottom runners 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. Door followers 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. Storage baskets (frame) 2 pcs. 3 pcs. 4 pcs. 4 pcs. 5 pcs. 5 pcs. 7 pcs. Storage baskets (door) 2 pcs. 3 pcs. 4 pcs. 4 pcs. 5 pcs. 5 pcs. 7 pcs. Basket hanging clips 4 pcs. 6 pcs. 8 pcs. 8 pcs. 10 pcs. 10 pcs. 14 pcs. Basket securing clips 4 pcs. 6 pcs. 8 pcs. 8 pcs. 10 pcs. 10 pcs. 14 pcs. Door frame hinges 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. Door frame mounting arms 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. Packing: 1 set (includes 1 hanging frame, 1 top and 1 bottom runner, 1 height adjustable hanging frame, basket hanging clips, 2 door mounting bars, 1 soft close dampener, storage baskets, mounting hardware and instructions) Storage baskets page 917 F Door frame mounting arm Material: Hanging frame, door panel mounting bar, & door hanging plate: steel, epoxy-coated Top and bottom runners: steel, zinc-plated; Storage baskets: steel, chrome-plated Basket hanging clip: plastic; : grey Bottom runner Door follower 917 E

56 Pull-Out Storage Units Swing-Out Pantry Unit with Soft & Silent Feature New Item 60 (2 3/8 ) 80 (3 1/8 ) 110 (4 3/8 ) 365 (14 3/8 ) 350/400 (13 3/4 /15 3/4 ) 310 (12 1/4 ) Swing-Out Pantry Unit Storage Baskets Choice of 7 heights For cabinet widths: 450 mm (17 3/4 ), 500 mm (19 11/16 ), and 600 mm (23 5/8 ), chrome-plated Installed height (25 5/8 37 3/8 ) (37 3/8 47 1/4 ) (47 1/4 57 ) (57 67 ) ( /4 ) (74 3/4 84 5/8 ) (84 5/8 92 1/2 ) Hanging frame 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Door mounting frame 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Top and bottom runners 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. Storage baskets (frame) 2 pcs. 3 pcs. 4 pcs. 4 pcs. 5 pcs. 5 pcs. 7 pcs. Storage baskets (door) 2 pcs. 3 pcs. 4 pcs. 4 pcs. 5 pcs. 5 pcs. 7 pcs. For cabinet width 450 mm (17 3/4 ) mm (19 11/16 ) mm (23 5/8 ) Packing: 1 set 917 F

57 Waste Bins For Countertop Mounting 500 (19 5 /8") Waste Bin, free standing Capacity: 41 litres (11 gal.) Material: Lid: plastic Housing: steel, epoxy-coated white (10 1 /4") 340 (13 5 /8") Inner Grommet Discontinued Sealed lid Grommet to line in counter top cut-out Sealing strip Waste Bin Mounts in countertops up to 40 mm (1 1 / 2") thick Material: plastic white (includes mounting hardware (4 clamps and screws), mounting instructions and template) Dotted line = bin liner Fixing clamps and screws to secure outer grommet from underneath the counter top Outer grommet Drip tray Drip tray 254 (10") 235 (9 1 /4") 227 (9") 68 (2 5 /8") 365 (14 3 /8") 65 (2 1 /2" Flush mounting Surface mounting Single Waste Bin Capacity: 11 litres (3 gal.) For flush or surface mounting With stainless steel and soft rubber ring Material: Lid: stainless steel Bin: plastic stainless steel/black

58 Waste Bins For Swing-Out Behind Doors Waste bin can be mounted for left or right hand use Features lid in the cabinet, as the door is opened the lid tilts automatically Waste Bin, side panel mounted For cabinet widths over 250 mm (10") For cabinet depths over 192 mm (7 1 /2") MINIMUM 175 (6 7/8") 175 (6 7/8") CABINET WIDTH Capacity: 5 litres (1.25 gal.) Material: plastic white (includes mounting instructions and hardware) 340 (13 3/8") Waste Bin, side panel mounted For cabinet widths over 400 mm (15 3 /4) MINIMUM 357 (14") 380 (15") 305 (12") Capacity: 15 litres (4 gal.) Material: Lid: plastic, white Pail: plastic, light grey CABINET WIDTH Housing: white, plastic-coated stainless steel, polished (includes mounting instructions and hardware) New Item Replacement Bin Material: plastic Capacity grey 15 litres Cabinet side panel Door 919 Door Strike Cabinet floor (3 3/16") Toekick Cabinet side panel Pedal 80 mm Min. 3 3/16" Door Pedal Spring-loaded roller arm Strike Door Opener for Hinged Base Cabinet Doors Material: Pedal: plastic, brown Strike: steel Spring loaded roller arm: plastic white

59 Waste Bins For Hinged Door Cabinets With spring-loaded lid lifting mechanism, the lid automatically remains in the cabinet when the door is opened Fits cabinet widths of 400 mm Can be mounted left or right handed New Item Big Box Round Waste Bin Material: Housing: stainless steel or epoxy-coated steel Mounting components, trim & lid: polished aluminum Inner bin: plastic, light grey Capacity [stainless steel aluminum] 20 litres white 15 litres Text Change 526 Cabinet width min. 400 Installation width min. 365 Installation depth min A

60 Waste Bins For Swing-Out Doors 199 (8") 376 (14 7 /8") 450 (17 3 /4") MINIMUM Waste Bin, side panel mounted For cabinet widths over 450 mm (18") Left or right mounting Capacity: 18 litres (4.75 gal.) CABINET WIDTH Material: plastic stainless steel white/light grey (17 3 /4") 376 (14 7 /8") 390 ( /8") (6 7 /8") 335 ( /8") MINIMUM Add on Kit For /014 Attaches to rear of waste bin, offering second waste bin. For installation depth of over 380 mm (15") Capacity: 5 litres (1.25 gal.) Material: plastic white/light grey CABINET WIDTH Mounts to cabinet side or rear wall. 10 ( 3 /8") 62 (2 3 /8") 9 1 /4" 130 (5 1 /8") for sidewall mounting 61 (2 3 /8") ca.175 (6 7 /8") (7") 359 (14 1 /8") min. 400 (15 3 /4") Waste Bin Rear or side wall-mounted Manual pull-out with metal rod for waste bin suspension Capacity: 8 litres (2 gal.) Material: plastic steel, chrome-plated white (includes fastening screws) Replacement bin Capacity: 18 litres (4.75 gal.) Material: plastic Cat.No. light grey

61 Waste Bins Pull-Out for Installation Behind Hinged Doors Mounts to cabinet bottom Features lid in the cabinet principle, as the door is opened the lid tilts automatically Optional pull-out tray for paper recycling can be added above waste bins 420 (16 1 /2") Waste Bin, floor-mounted, manual extension For cabinet widths over 300 mm (11 3 /4) Capacity: 20 litres (5.25 gal.) Material: Holder: steel, epoxy-coated Cover: plastic Pails: plastic MINIMUM CABINET WIDTH white/grey-brown (9 5 /8") 425 (16 3 /4") Replacement Bin Material: plastic brown Discontinued 248 (9 3 /4") Double Waste Bin, floor-mounted, manual full-extension For cabinet widths over 300 mm (11 3 /4") Capacity: 2 x 15 litres (4 gal.) Material: Holder: steel, epoxy-coated Cover: plastic Pails: plastic MINIMUM CABINET WIDTH 407 white/green and brown (16") (19") Replacement Bins for series Material: plastic Capacity 15 litres brown

62 Waste Bins Pull-Out Easy and fast installation (only 4 screws) Lid snaps on Practical storage area on top of lid Use with a hinged door Load capacity = 40 kg (88 lbs.) 100,000 cycle tested Easy Cargo 40 Bottom mounted, full-extension with ball bearing telescoping slides Compatible with 18 face frame cabinets or 15 frameless cabinets Outside cabinet width from 400 mm (15 3/4 ) Capacity: 40 litres (10.5 gal.) Material: Frame: metal, silver Waste bins: plastic grey [ ] (includes mounting screws) Number Change 320 (12 5/8 ) 542 (21 3/8 ) 465 (18 5/16 ) Easy Cargo 50 Bottom mounted, full-extension with ball bearing telescoping slides Compatible with 21 face frame cabinets Outside cabinet width from 500 mm (19 3/4 ) Capacity: 49 litres (13 gal.) (1x 30 litres (8 gal.), 1 x 19 litres (5 gal.) Material: Frame: metal, silver Waste bins: plastic grey [ ] (includes mounting screws) Number Change 430 (17 ) 455 (18 ) 465 (18 5/16 ) 922

63 Waste Bins Pull-Out Door Mounted Uno Waste Bin - Pull-Out Mounts directly to pull out shelf Bottom mounting Offers narrow width but high capacity Pull-out shelf & soft roller not supplied 376 (14 7 /8") 376 Waste Bin, floor-mounted For cabinet widths over 250 mm (9 3 /4") Capacity: 18 litres (4.75 gal.) Material: Lid: plastic Pail: plastic MINIMUM CABINET WIDTH white/light grey (8") 450 (17 3 /4") Replacement Bin, 18 liter Material: plastic light grey Text Change Replacement Bins for series Material: plastic Capacity Cat.No. 15 [litre] brown [litre] green [litre] grey Tension spring Pedal Strike Cabinet floor Front panel Extension shelf Strike (14 3/16"-16 5/8") 260 (10 1/4") 415 (16 3/8") 370 (14 1/2") 501 (19 3/4") (20 3/16"-22 5/8") Toekick 38 mm min. (1 1 /2") 395 (15 1/2") 495 (19 1/2") 800 mm min. (3 3 /16") Double Waste Bin, side wall-mounted, manual full extension For cabinet widths over 360 mm (14 3 /16") Adjustable inside width: mm (14 3 /16" 16 5 MINIMUM /8") Capacity: 2 x 18 litres (4.75 gal.) Material: Frame: steel, epoxy-coated 6 Cover: plastic CABINET WIDTH Pails: plastic [white/light grey ] Discontinued Quadruple Waste Bin, side wall-mounted, manual full extension For cabinet widths over 512 mm (20 3 /16") Adjustable inside width: mm (20 3 /16" 22 5 /8") MINIMUM Capacity: 2 x 15 litres (4 gal.) 1 x 7 litres (1.75 gal.) 1 1 x 24 litres (6.25 gal.) Material: Frame: steel, epoxy-coated CABINET WIDTH Cover: plastic Pails: grey, green, light grey and brown [white ] Discontinued w/ Stock Door opener, for waste bins mounted to pull-out shelf with door attached Material: Pedal: plastic Strike: steel Tension spring: steel wire brown

64 Waste Bins Pull-Out Door Mounted Designed to be removed from the cabinet while the lid remains inside for use as a shelf Bin is mounted to the inside of the cabinet, and incorporates its own runners with self-closing feature Bin fits into a standard 450 mm (17 3/4") or 500 mm (19 11/16") wide cabinet For cabinet thickness mm (5/8"-13/16") with 5 mm (3/16") adjustability on either side For cabinet width 450 mm (17 3/4 ) Installation width min. 410 mm (16 1/8 ) Installation depth min. 528 mm (20 13/16 ) For cabinet width 450 mm (17 3/4 ) Euro-Cargo 45 and 50 waste bins Minimum installed depth: 528 mm (20 13/16") Minimum installed width: 410 mm (16 1/8") Capacity: 2 35 litres (9.25 gal.) bins Material: Lid & Bin Holder: steel, silver epoxy-coated Bins: plastic, light grey 450 mm (17 3/4") mm (19 11/16") MINIMUM CABINET WIDTH Note: Waste bin for 500 mm cabinet version includes space bracket. 546 (21 1/2 ) 410 (16 1/8 ) 528 (20 13/16 ) 560 (22 1/16 ) For cabinet width 600 mm (23 5/8 ) Installation width min. 560 mm (22 1/16 ) Installation depth min. 528 mm (20 13/16 ) 546 (21 1/2 ) 528 (20 13/16 ) For cabinet width 600 mm (23 5/8 ) New Item New Item Euro-Cargo 60 waste bin Minimum installed depth: 528 mm (20 3/4") 6 Minimum installed width: 560 mm (22") Capacity: 2 35 litres (9.25 gal.) bins litres (2.25 gal.) bins Material: Lid & Bin Holder: steel, silver epoxy-coated Large bins: plastic, light grey Small bins: plastic, granite grey Replacement Bin Material: plastic : light grey MINIMUM CABINET WIDTH Capacity 8.5 litres [ ] 35 litres Replacement Lid Material: plastic green

65 Waste Bins Pull-Out Door Mounted Both versions can be installed in face-frame, inset-door, and frameless door applications Inside cabinet area: 14 wide x 21 high Easy to install clip-on frame Sturdy metal lid, suitable as shelf, and seals in odor Smaller bin for bio-bin, dog/cat food bin, or plastic bags 130,000 cycle tested 533 mm (21") 502 mm (19 3/4") 300 (12") 356 mm (14") 572 mm (22 1/2") Cabinet depth Min. 533 mm (21") Double Waste Bin, US Cargo 15 Side wall mounted, manual full extension ball bearing overtravel slides. Capacity: 1 x 40 litres (10.57 gal.) 1 x 8.5 litres (2.25 gal.) Material: Frame: steel, powder-coated Cover: plastic Pails: plastic silver/light grey mm (19 3/4") Both bins offer over 21 gallons of waste separation Inside cabinet area: 19 3/4 wide x 21 high 507 mm (20") 559 mm (22") 451 mm (17 3/4") 578 mm (22 3/4") Cabinet depth Min. 533 mm (21") Double Waste Bin, US Cargo 21 Side wall mounted, manual full extension ball bearing overtravel slides. Capacity: 2 x 40 litres (10.57 gal. x 2) Material: Frame: steel, powder-coated Cover: plastic Pails: plastic silver/light grey Replacement Bin Material: plastic : light grey Capacity 925 New Item 8.5 litres [ ] 40 litres Replacement Lid Material: plastic New Item green Attach cord to back hole in slide 70 (2 3/4") Door Opener, for US Cargos Mounted to pull out door for frameless cabinets Material: Pedal: plastic Strike: steel, black enameled Tension spring: black cord silver (includes mounting hardware)

66 Towel Rack Pull-Out Can be mounted directly below the countertop, to side or back wall Non-slip pull-out towel bars can be pulled out with ease to a distance of 765 mm (30") Bars are prevented from twisting by the square-profiled retaining bar Towel rack, rail and 2 bars Installed width: 140 mm (5 1 / 2") 140 (5 1 /2") 85 (3 3 /8") 430 (17") 765 (30") Material: Mounting bracket and inner tube: steel, epoxy-coated Outer bar: plastic, ribbed (non-slip) white (7 1 /2") 85 (3 3 /8") Towel rack, 3 bars Installed width: 190 mm (7 1 / 2") Material: Mounting bracket and inner tube: steel, epoxy-coated Outer bar: plastic, ribbed (non-slip) white

67 Towel Rack Pull-Out Length of mounting bracket: 399 mm (15 3/4") Length of extending rails: 430 mm (17") Installation length, extended bar lengths and installed heights of all three models are the same Undermount or side-mounted H Towel Rack, 2 bars, extendable Installed dimensions: (w) x (h) Under-mount: 65 x 73 mm (2 1 /2" x 3") Side-mount: 91 x 38 mm (3 5 /8" x 1 1 /2") W W H Material: aluminum anodized or epoxy-coated chrome polished silver anodized (includes 3 precision plastic rollers & plastic end caps) 927 Installedlength 460 (18 1/8") Extendedlength 285 (11 1 /4") Towel Rack, 3 bars, extendable Installed dimensions: (w) x (h) Under-mount: 125 x 73 mm (5" x 3") Side-mount: 152 x 38 mm (6" x 1 1 /2") Material: aluminum anodized or epoxy-coated chrome polished silver anodized (includes 3 precision plastic rollers & plastic end caps)

68 Kitchenware & Plate Organizer Customize drawer with any combination of beech posts and dividers Posts mount into pre-drilled holes and are secured with fastening nut Base plate can be field cut to size Divider and Knife holder set press-fit into pre-drilled holes by dowel 32 (1 1/4") A 25 (1") 25 (1") 160 (6 5/16") 160 (6 5/16") B Post Plate Locking Nut Base plate Height: 10 mm (3/8 ) Material: veneer, beech A x B 533 (21 ) x 610 (24 ) (36 ) x 610 (24 ) Post, round Material: beech Packing: 1 set (4 pcs., includes mounting hardware and locking nut) Post, triangle Material: beech Packing: 1 set (4 pcs., includes mounting hardware and locking nut) 609 (24") 190 (7 1/2") 120 (4 3/4") 15 (5/8") 40 (1 9/16") 45 (1 3/4") 174 (6 7/8") 384 (15 1/8") 446 (17 5/8") 120 (4 3/4") 78 (3 1/16") 15 (5/8") 32 (1 1/4") 64 (2 1/2 ) 288 (11 3/8") 80 (3 1/8") 30 (1 1/16") 15 (5/8 ) 45 (1 3/4") 120 (4 3/4") 15 (5/8") 174 (6 7/8") 174 (6 7/8 ) 64 (2 1/2 ) 96 (3 3/4") 126 (5") 120 (4 3/4") 15 (5/8") 64 (2 1/2") 96 (3 3/4") 20 (3/4 ) Deep Drawer Dividers Material: beech Dimensions 609 (24 ) x 120 (4 3/4 ) x 15 (5/8 ) (17 5/8 ) x 120 (4 3/4 ) x 15 (5/8 ) (7 1/2 ) x 120 (4 3/4 ) x 15 (5/8 ) (5 ) x 120 (4 3/4 ) x 15 (5/8 ) (includes locking nuts) Utensil divider, press-fit, short Material: beech Packing: 1 set (4 pcs.) Utensil divider, press-fit, long Material: beech Packing: 1 set (4 pcs.) Knife holder set, press-fit Material: beech Packing: 1 set (includes knife block and knife stop) 928

69 Drawer Inserts Cutlery Tray & Spice Drawer Insert Can be trimmed to fit drawer For drawer inside depths from 457 mm (18") to 540 mm (21 1 / 4") For drawer inside widths from 184 mm (7 1 / 4") to 552 mm (21 3 / 4") Cutlery Trays /4-9 3 /4 9 1 / / mm mm / / mm Cutlery Trays with large compartments 17 1 / / mm / / mm 19 1 / / mm 13 1 / / mm 18"-21 1/4" Material thickness: 2 mm Height: 57 mm (2 1 / 4") Depth: 540 mm (21 1 / 4") to 457 mm (18") Material: plastic Size cabinet width min. max. white gloss mm (inch) mm (inch) (7 1 / 4) 248 (9 3 / 4) (9 1 / 4) 298 (11 3 / 4) (11 1 / 4) 349 (13 3 / 4) (13 1 / 4) 400 (15 3 / 4) (15 1 / 4) 451 (17 3 / 4) (17 1 / 4) 502 (19 3 / 4) (19 1 / 4) 552 (21 3 / 4) / / mm Spice Drawer Insert / / mm / / mm Can be trimmed to fit drawers up to 1300 mm (51 1 / 8") / / mm 18"-21 1/4" Material thickness: 2 mm Height: 57 mm (2 1 / 4") Depth: 540 mm (21 1 / 4") to 457 mm (18") Material: plastic Size cabinet width min. max. white gloss mm (inch) mm (inch) (11 1 / 4) 349 (13 3 / 4) (13 1 / 4) 400 (15 3 / 4) (15 1 / 4) 451 (17 3 / 4) (19 1 / 4) 552 (21 3 / 4) For storage of average sized spice jars. A minimum inside drawer height of 3 1 / 4" is required x 550 mm (51 1 / 8 x 21 5 / 8") Material thickness: 3 mm Material: plastic white gloss silver maple

70 Drawer Inserts Trimmable The top tier slides easily on ball-bearing slides back into the cabinet allowing easy access to the bottom tier The top tier lifts out for easy cleaning Can be trimmed to fit drawers Double Cutlery Tray, with removable top tier Material thickness: 3 mm ( 1 /8") Height: 78 mm (3 1 /8") Material: plastic Size Width Depth white gloss minimum maximum minimum maximum (11 1 /2") 340 (13 3 /8") 435 (17 1 /8") 500 (19 3 /4") (13 7 /8") 390 (15 3 /8") 435 (17 1 /8") 500 (19 3 /4") (15 3 /8") 440 (17 1 /4") 435 (17 1 /8") 500 (19 3 /4") (17 1 /4") 490 (19 1 /4") 435 (17 1 /8") 500 (19 3 /4") (19 1 /4") 540 (21 1 /4") 435 (17 1 /8") 500 (19 3 /4") Top Tier 423 Bottom Tier

71 Cutlery Tray Inserts With Wood Organization Pieces Can be trimmed to fit drawer Choose wood inserts from page 932 to customize organization Text Change Cutlery Trays For drawer depth: mm (19 1 / / 4 ) For drawer Height: 50 mm (2") Material thickness: 2.5 mm ( 3 / 32") Material: plastic For cabinet width (Face Frame) Width of tray maple silver grey textured [A mm (8 12 ) [B mm (12 16 ) [C] mm (14 18 ) [D] mm (16 20 ) [E] mm (18 22 ) [F] mm (20 24 ) [G] mm (24 28 ) [H] mm (28 32 ) [I] mm (32 36 ) [J] mm (36 40 ) A B C D E F (8-12") (12-16") (14-18") (16-20") (18-22") (20-24") G H I (24-28") J (36-40") (28-32") (32-36") Image Change 931

72 Wood Organization Pieces For Cutlery Tray Inserts For use with inserts on page 931 Use numbering system to determine placement of wood pieces Container Holder For spices or jars with diameters up to 55 mm (2 1 /8 ) Cut-out diameter: 57 mm (2 1 / 4 ) Material: maple, varnished # of cut-outs Knife Block, holds 4 knives Material: maple, varnished K Image Change Text Jar [with wooden lid] Change Diameter: 55 mm (2 1 / 8 ) at base, 61 mm (2 3 / 8 ) at top Height: 58 mm (2 1 / 4 ) with lid, 50 mm (2 ) without lid Text Material: [Jar:] glass, clear Change [Lid: beech, varnished with rubber sealing ring] Sample Configurations Divider, self-adhesive Material: maple, varnished 1 For Horizontal 90 x 44 x (3 9 / 16 x 1 3 / 4 x 3 / 8 ) 2 For Vertical 100 x 44 x (3 15 / 16 x 1 3 / 4 x 3 / 8 ) A B B C C D (8-12") E (24-28") (12-16") (14-18") F (28-32") (16-20") (18-22") G (32-36") (20-24") Image Change H (36-40") 932

73 Drawer Inserts Trimmable Made from superior quality 9-ply birch Clear finish provides a durable, scratch-resistant surface Easily trimmable in widths up to 50 mm (2") 75 mm (3") strips are easily trimmable for depth adjustment Stylish side profile 8 mm ( 3 /8") base provides a sturdy bottom 75 (3") 470 (18 1/2") 50 (2") 50 (2") 50 (2") Cutlery Tray Material: plywood, birch (11 3/8"-13 3/8") (14 3/8"-16 3/8") (17 3/8"-19 3/8") Length Width Height min max min max 470 (18 1 /2") 545 (21 1 /2") 290 (11 3 /8") 340 (13 3 /8") 74 (3") (18 1 /2") 545 (21 1 /2") 366 (14 3 /8") 416 (16 3 /8") 74 (3") (18 1 /2") 545 (21 1 /2") 442 (17 3 /8") 492 (19 3 /8") 74 (3") (3") 153 (6") 470 (18 1/2") Accessory Tray Material: plywood, birch Length Width Height min max 470 (18 1 /2") 545 (21 1 /2") 153 (6") 74 (3") Knife Block Holds up to 4 knives Chrome rods position handles high so blades stay in place Easily trimmable for depth adjustments Material: plywood, birch Length Width Height 545 (21 1 /2") 153 (6") 74 (3") Spice Tray Holds up to 12 spice jars Easily trimmable for depth adjustments Material: plywood, birch Length Width Height 545 (21 1 /2") 153 (6") 74 (3")

74 Drawer Inserts Mix and match to create customized organization Use non-slip shelf liner mats for oversize utensil storage (see page 937) Apply rubber bumpers to base to avoid shifting (see page 489) Optional spacer strips are available for a custom fit Strips fit between side or back of drawer box and tray Sample Configurations The series of natural beech drawer inserts found on pages are designed to provide flexibility in accommodating various drawer widths. Below are some examples of the wide variety of configurations possible to maximize the beauty and functionality of your drawers. 30" Base Cabinet Drawer Examples 367 (14 1/2") 367 (14 1/2") 443 (17 1/2") 291 (11 1/2") 36" Base Cabinet Drawer Examples Non-slip shelf liner Spacer Strips 519 (20 1/2") 200 (8") Strip for depth adjustment Strip for width adjustment 100 (4") 934

75 Drawer Inserts Dividers are flared into the bottom of the tray Solid wood, fully assembled 4 mm beech ply base 291 (11 1/2") 367 (14 1/2") 443 (17 1/2") 495 (19 1/2") Cutlery Tray Material: beech, unsteamed Length x Width x Height 495 (19 1 /2") 291 (11 1 /2") 50 (2") (19 1 /2") 367 (14 1 /2") 50 (2") (19 1 /2") 443 (17 1 /2") 50 (2") (19 1 /2") 519 (20 1 /2") 50 (2") (20 1/2") Unique groove for knife handles prevents shifting Stores 6 knives Mix and match to create customized organization 495 (19 1/2") 367 (14 1/2") 519 (20 1/2") Cutlery Tray with Knife Block Material: beech, unsteamed Length x Width x Height 495 (19 1 /2") 367 (14 1 /2") 50 (2") (19 1 /2") 519 (20 1 /2") 50 (2") Free standing Easily trimmable up to 13 mm (1/2") on each side Stores 6 knives Optional spacer strips are available for a custom fit Easy to cut down for minor depth or width adjustments 935 Knife Block Material: beech, unsteamed Length x Width x Height 495 (19 1 /2") 195 (7 3 /4") 50 (2") Spacer Strips Material: beech, unsteamed Length x Width x Height 600 (24") 6 ( 5 /8") 52 (2 1 /16") (48") 6 ( 5 /8") 52 (2 1 /16")

76 Drawer Inserts Insert the container holder and canisters for a complete set Open Tray Material: beech, unsteamed Length x Width x Height 495 (19 1 /2") 100 (4") 50 (2") Holder fits into the open tray Order containers separately Mix and match to create customized organization Container Holder Dimensions: (L x W x H) 464 (18 1 /4") x 69 (2 3 /4") x 40 (1 5 /16") Material: veneer beech brushed aluminum Stainless steel set has lids for dispensing spices Wooden lids include a rubber grommet for a tight fitting seal Containers fit into the container holder for secure storage Containers Dimensions: Ø 60 mm (2 3 /8") x 60 mm (2 3 /8") stainless steel with lids glass with wooden lids Packing: Set of 4 936

77 Hailo Kitty New Item Functional, attractive design Suitable as a storage container, compost collector, or utensil tray Use in the sink as a pull-out, or on the countertop Dimensions: (W x D x H) 250 (9 7 /8") x 160 (6 1 /4") x 170 (6 3 /4") Material: plastic grey A

78 Mats Cut-to-size to fit in sink cabinet Unique dimples collect water or other liquids to prevent damage to cabinet Dimples can collect up to 6 liters of water per square meter Under-sink Mat 6 (1/4") 625 (24 5/8") 6 (1/4") 1150 (45 1/2") Material: Polystyrene white grey, stainless (625 x 1150 mm (24 5/8" x 45 1/2") Cut-to-size non-slip mats prevent sliding or movement of items on pull-out shelves, revolving shelves, drawers, etc. Available in an assortment of colours Translucent mat is ideal for glass applications as the surface remains visible but protected, offering slip resistance and noise prevention For use as a mat or shelf protector Manageable roll size Non-slip Mat High quality, acoustic, and slip resistant 937 Non Slip Material: synthetic rubber with non-slip surface white Packing: 1 roll (1.5 x 10 m (59 x 32 8 ) Material: synthetic rubber with non-slip surface white translucent silver grey driftwood Packing: 1 roll (600 x 1500 mm (23 1 2" x 59")

79 Drawer Inserts Silverware Drawer Kit Assembly instructions: 1. Line the drawer base with self-adhesive felt. 2. Mount the holders (silverware must lie at right angle to drawer movement). 3. Knife holders: adjoining knives must always face in opposite directions (see photo below). Kitchen and Bath Organization Felt cloth, non-tarnish, self-adhesive Holders - Self-adhesive For lining the drawer bottom Material: felt green brown maroon Packing: 1 roll (584 x 914 mm (23" x 36") example shown here A B C D 3/4" 1 1/8" 1 1/8" 5 3/8" 4 5/8" 2 1/2" 1 1/4" 5/8" 1 1/4" 1 1/4" 1 3/8" 1 3/8" Specifications A B C D Set consists of: brown For: 12 knives 12 forks 2 large items pieces 12 spoons 12 teaspoons Set consists of: For: 12 knives 16 forks 6 small items 4 large items pieces 16 spoons 16 teaspoons Set consists of: For: 24 knives 20 forks 6 large items pieces 20 spoons 20 teaspoons 938

80 Kitchen Cabinet Accessories 550 (21 5 /8") 600/900 (23 5 /8"/35 1 /2") 40 (1 9 /16") Extending oven rack, with integrated safety rail at front and rear. For installation under range tops or in open areas between two cabinets. wire Guide: galvanized steel Guide cover: stainless steel Installed width mm (inch) chrome-plated 600 (23 5 / 8") (35 1 / 2") (includes guides and covers) Bottle Caddy, 8 bottle capacity Stands on floor of storage drawer within wire fence. Dimensions: 225 x 410 x 297 mm (8 7 /8" x 16 1 /8" x 11 5 /8") chrome-plated Baking rack support Screw-mounted to cabinet base. Dimensions: 75 x 300 x 250 mm (3" x 12" x 10") chrome-plated Wire fence for bottle caddy Screw-mounted to drawer base. Dimensions: 240 x 430 x 40 mm (9 3 /8" x 17" x 1 1 /2") chrome-plated

81 Shelf Standard System With special clip-on accessories Provides storage space for cleaning supplies and equipment such as vacuum cleaner accessories With an installation width of only 315 mm (12 3 /8") or 415 mm (18 5 /16"), this space saving system can be mounted on cabinet side panels or doors The layout can be rearranged at any time The specified installation width of the system is measured at the outside edges of the supporting standards 315 (12 3/8") or 415 (18 5/16") 25 (1") 67 (2 5/8") 50 (2") 50 (2") 500 (19 11/16") Slotted Standards, accept individual accessories screw-mounted Length: 1500 mm (59"), epoxy-coated sliver (37 3/8") Insert the keyhole fasteners and press down securely to lock. Wire basket, clip-on wire Width x Depth x Height chrome-plated 300 x 75 x 75 (11 13 / 16" x 2 15 / 16" x 2 15 / 16") x 75 x 75 (15 3 / 4" x 2 15 / 16" x 2 15 / 16") Wire basket, clip-on wire Width x Depth x Height chrome-plated 300 x 200 x 75 (11 13 / 16" x 7 7 / 8" x 2 15 / 16") x 200 x 75 (15 3 / 4" x 7 7 / 8" x 2 15 / 16") Hook rail, clip-on wire Width x Depth x Height chrome-plated 300 x 52 x 33 (11 13 / 16" x 2 1 / 16" x 1 5 / 16") x 52 x 33 (15 3 / 4" x 2 1 / 16" x 1 5 / 16")

82 Cabinet Accessories Multi-purpose basket, three-sided With screw-mounting eyes wire Width x Depth x Height chrome-plated 312 x 101 x 112 mm (12 1 /4" x 4" x 4 1 /2") Door basket Screw-mounted, with plexi-glass liner wire Width x Depth x Height chrome-plated 260 x 90 x 63 mm (10 1 /4" x 3 1 /2" x 2 1 /2") Hookrail with five hooks Screw-mounted to side panels wire Width x Depth x Height chrome-plated 350 x 29 x 55 mm (13 3 /4" x 1 1 /4" x 2 1 /4") Hookrail with five hooks Screw-mounted to underside of wall unit wire Width x Depth x Height chrome-plated 350 x 30 x 54 mm (13 3 /4" x 1 1 /4" x 2 1 /8") 941

83 Cabinet Accessories Kitchen roll holder, under cabinet screw-mounted wire Width x Depth x Height chrome-plated 300 x 135 x 165 mm Wine rack, screw-mounted to side panel of cabinet Capacity: 15 bottles Width x Depth x Height chrome-plated 260 x 185 x 624 mm (10 1 / 4" x 7 1 / 4" x 24 9 / 16") Wine rack shown in reduced depth cabinet Wine rack Designed to hold 15 bottles Fits into a standard 300 mm wide cabinet with reduced depth Can also be attached to a shelf for pulling out of a wider cabinet with hinged or fixed door panel chrome-plated

84 Cabinet Accessories New Item Wine glass rack, for mounting in wall mounted cabinets Mounting clips included Cabinet Glass Clips width columns required Width chrome-plated 150 mm mm mm mm mm mm mm mm A Wine glass rack, for mounting in base mounted cabinets Mounting clips included Cabinet Glass Clips width columns required Width chrome-plated 150 mm mm mm mm mm mm mm mm

85 Folding Step Stool Stepfix can be hung on a side panel using the optional hanging bracket Stepfix is a sturdy, steel, compact folding step stool for kitchen use Non-slip rubber mat Safety spring and smooth folding mechanism Stepfix has four built in rollers permitting it to slide in/out with ease under cabinets when used with optional toekick bracket Weight capacity 150 kg (330 lbs) 95 (3 3 /4") 465 (18 3 /8") 385 (15 1 /8") 405 (16") 390 (15 3 /8") 390 (15 3 /8") Step stool With 2 steps 200 x 300 mm (7 3 / 4 x 11 3 / 4") covered with non-slip rubber treads., epoxy-coated Feet: plastic silver/black white/grey Toekick bracket Attaches to step stool and toekick. Use to slide under cabinet. A minimum of 100 mm (4") is required. galvanized Hanging bracket Screw-mounts to cabinet side panel to stow step stool. Length: 140 mm (5 1 / 2") Depth: 30 mm (1 1 / 8") Height: 35 mm (1 3 / 8"), epoxy-coated white

86 Cabinet Accessories Broomstick holder, screw-mounted, galvanized; Rollers: rubber Width x Depth x Height bright 51 x 40 x 50 mm Packing: 10 pcs. Ultrahold Dimensions: 18" (4 hooks) and 36" (8 hooks) length Use in kitchen pantry, garage, workshop, office, storage room. Aluminum rail Will not rust Non-slip covering on hooks Will virtually hold anything Adjustable sliding clamp May be removed from rail and fastened independently to wall. Each clamp holds up to 20 lbs. Material: Rail: aluminum, anodized Clip: steel Length 18" " Broomstick holder Bottle holder grommets With four holders, for concealed screw-mounting Material: Housing: plastic Hooks: steel, nickel-plated, rubber-coated Width x Depth x Height white 318 x 27 x 75 mm (includes mounting hardware) For insertion in round opening Height to lower edge: 24 mm Material: plastic Aperture Packing Ø95 mm black pcs. Ø105 mm white pcs. black pcs. 944

87 Cabinet Spice Racks Spice rack With screw-mounting eyes wire Width x Depth x Height No.of shelves chrome-plated 244 x 66 x 395 mm (9 5 / 8" x 2 5 / 8" x 15 9 / 16") 391 x 66 x 395 mm (15 3 / 8" x 2 5 / 8" x 15 9 / 16") 530 x 66 x 274 mm (20 7 / 8" x 2 5 / 8" x 10 3 / 4") 945

88 Storage Systems For Upper Cabinets Cabinet storage systems to be built into narrow cabinets Minimum installation dimensions: Inside width 262 mm (10 1 / 2") Inside depth 280 mm (11") Inside height when using the follower fitting: 420 mm (16 1 / 2") or 630 mm (24 3 / 4") Larger dimensions can be made to work by cutting the 16 mm ( 5 / 8") or 19 mm ( 3 / 4") thick back panel as desired The follower fitting connects the movable back panel For left hand or right hand doors Door or pull-out shelf can be used alone or combined Opening the cabinet door makes the pull-out shelves slide-out Door-mounted shelves Can be screw-mounted on the inside of the cabinet door Width: 210 mm (8 1 / 4") Depth: 90 mm (3 1 / 2") Height: 570 mm (22 7 / 16") Liners: textured metal chrome-plated (includes 3 shelves and installation instructions) Pull-out shelves Can be screw-mounted onto a 2-part (movable) back panel Width: 255 mm (10 1 / 32") Depth: 155 mm (6 1 / 8") Height: 570 mm (22 7 / 16") Liners: textured metal chrome-plated (includes 3 shelves and installation instructions) Follower fitting For the pull-out shelves With welded angle brackets for mounting onto the rear panel Material: Visible parts: steel Guide runners: steel Front cover for guides: plastic chrome-plated Packing: 1 set (includes installation instructions) 946

89 Revolving Shelf Fitting Systems When the cabinet door is opened the revolving shelf slides forward for easy access Clear shelves allow items in upper units to be seen Suitable for narrow cabinets 268 mm (10 1 / 2") wide with an inside depth of min. 250 mm (9 7 / 8") Allows easy removal of smaller items For use in kitchen or bath (10 5 /16"-10 9 /16") 250 (9 7 /8") Revolving Shelf, Ø 235 (9 1/4 ) Material: Shelf: plastic Fence: steel white/chrome-plated A Revolving Shelf, Ø 235 (9 1/4 ) Material: Shelf: plastic Fence: steel clear/chrome-plated The revolving shelves are supplied complete with bearing disc and securing pin made of steel, bright galvanized 947 Posts for revolving shelves Upper bearing sleeve: plastic Post length Installed length For shelf chrome-plated/ mm (inch) A mm (inch) number white 560 (22") 596 (23 1 /2") (31") 820 (32 1 /4") (33 7 /8") 896 (35 1 /4") (46 5 /8") 1221 (48") Pull-Out Fitting for Revolving Shelf Unit Includes: upper and lower runner, with all accessories Material: Runners: steel, galvanized Cover: steel, epoxy-coated white, RAL Packing: 1 set (includes upper and lower runner with accessories) Installed height = inside cabinet height less 34 mm. If necessary, the axle can be shortened appropriately for shorter height.

90 Swivel Panel A unique storage system for kitchens, bathrooms, and living areas An organizational solution for under-utilized corner space Functions as a room divider Double functionality with 5 semi-circular wire baskets vertically attached to a pole and backed by a panel of your choice (customer supplied) Attach our Backsplash Railing System (see pages ) to the other side of the panel or simply add a mirror, magnetic message board, etc 400mm (15 3/4") Bio-Fix products from Häfele. Min. 120 mm (4 3/4") Max. 10 kg (22 lbs.) Max mm (93 3/4") Pole Ø 50 mm (2") Length: 2600 mm ( ) -plated chrome polished mm (29 1/2" /2") Min. 120 mm (4 3/4") Floor Basket set Dimensions: 420 x 750 mm (16 1 2" x ") -plated chrome-polished Packing: 1 set (includes 5 wire baskets, top wall bracket and bottom bearing, top trim cap) 948

91 Kitchen Rail System Individual pieces can be ordered separately on pages Installed along the front of the countertop Installed on top of the countertop Wall-mounted Tubular Rail Set, 16 mm ( 5 8 ) diameter Flat end cap chrome polished nickel matt Packing: 1 set (includes 1500 mm tube, end caps, (4) posts, (4) S-hooks, (4) adapters and dowel connector) Tubular rail, 16 mm (5/8 ) diameter Length: 1500 mm gold polished nickel-plated matt chrome-plated polished Ø Countertop edge Ø13 Tubular rail, 16 mm (5/8 ) diameter gold polished nickel-plated matt chrome-plated polished ø ø13.2 Decorative end-cap, with profile-style head plugs into kitchen rails. Material: brass nickel-plated matt chrome-plated polished gold coloured matt Ø Countertop edge 53 Ø13 Recess to seat end of tube The recess which accommodates the end cap ensures a neatly concealed joint for decorative end-caps Tubular rail, 16 mm (5/8 ) diameter gold polished nickel-plated matt chrome-plated polished Decorative end-cap, with flat head plugs into kitchen rails. Material: brass gold polished nickel-plated matt chrome-plated polished ø18 ø13.2

92 Kitchen Rail System Ø16.2 M4 internal thread 46 (1 7 /8") 26 Ø8 Ø14 50 Ø 8 15 Railing posts Press-fits over fastening screw (included), with M4 set screw and hex key to secure rail Material: zinc gold polished nickel-plated matt chrome-plated polished ø13.2 Dowel connector Plugs into kitchen rails and elbow sections Material: plastic white Packing: 2 pcs. R 20 Ø4.5 Ø20 2 Adapter Fits front of countertops edges (R = 20) Material: zinc nickel-plated matt chrome-plated polished (1 1/16") 55 (2 3/16") Mounting diagram Dowel Connector S-hooks, for railing gold polished nickel-plated matt chrome-plated polished brass-polished Packing: 4 pcs. Rail posts set screws to secure rails and posts Fastening screw 2.5 mm dia. hole adapters to fit the front of round-countertop edges 950

93 Kitchen Rail System Stainless Steel Mounting diagram Dowel Connector Rail posts set screws to secure rails and posts Fastening screw 2.5 mm dia. hole Ø (59") Tubular rail, 16 mm (5/8") dia. Length: 1500 mm (59"), seamless tubing Material: stainless steel matt Ø13 Ø Elbow Section 90, 16 mm (5/8") dia. seamless tubing Material: stainless steel matt Ø16 Ø13 68 R20 Elbow Section 135, 16 mm (5/8") dia. Material: stainless steel matt Ø M4 internal thread Ø Ø Ø Ø13.5 ø13.2 Railing post, for tubular rail 16 mm (5/8") dia. Press fits over fastening screw (included) with M4 set screw and hex key to secure rail. Material: stainless steel matt Decorative end cap, with flat head Plugs in tubular rail 16 mm (5/8") dia. Material: stainless steel with plastic sleeve matt Dowel connector Plugs into kitchen rail and elbow sections Material: plastic white Packing: 2 pcs.

94 Midway Railing System Hanging Shelf, shallow 195 Discontinued chrome-plated polished Discontinued Hanging Shelf, deep chrome-plated polished Hanging Shelf 115 chrome-plated polished Hanging Shelf, 2 tier chrome-plated polished

95 Backsplash Railing System Easy to clean rail with concealed screw attachment Individual components can be positioned separately Rail Material: Mounting rail: plastic, grey Cover: aluminum, stainless steel material Length 600 mm (23 5 /8") mm (35 1 /2") mm (47 1 /4") mm (59 1 /16") Material: Mounting rail: plastic, grey Cover: aluminum Length 600 mm (23 5 /8") mm (35 1 /2") mm (47 1 /4") mm (59 1 /16") Packing: 1 set (including fastening material) Multi-purpose Shelf Dimensions: 440 x 150 x 275 mm (17 3 8" x 6" x "), plated : Support rails/shelf polished chrome/aluminum chrome matt/aluminum nickel matt/stainless steel Paper Towel Holder, for junior rolls only Dimensions: 352 x 150 x 255 mm (13 7 8" x 6" x 10"), plated polished chrome chrome matt nickel matt Paper Towel/Kitchen Wrap Holder, with serrated edges on both lower holders (for aluminum foil, grease-papers, cling wrap, etc) Paper towel holder holds junior rolls only Dimensions: 352 x 150 x 305 mm (13 7 8" x 6" x 12"), plated : Support rails/cutter cover polished chrome/aluminum chrome matt/aluminum nickel matt/stainless steel Dimensions listed are width x depth x height

96 Backsplash Railing System Spice Rack, with 2 shelves For spice jars up to 59 mm (2 3 8") in diameter, and 110 mm (4 3 8") tall Dimensions: 380 x 80 x 275 mm (15 x x "), plated : Support rails/shelves polished chrome/aluminum chrome matt/aluminum nickel matt/stainless steel Lid Holder Holds 2 pan lids Dimensions: 115 x 80 x 255 mm (4 1 2 x x 10"), plated polished chrome chrome matt nickel matt Filter Holder Organizes coffee filters Dimensions: 195 x 80 x 290 mm (7 5 8 x x "), plated polished chrome chrome matt nickel matt Knife Holder, for 8 knives Dimensions: 380 x 80 x 255 mm (15 x x 10"), plated : Support rails/knife holders polished chrome/aluminum chrome matt/aluminum nickel matt/stainless steel Knife Holder, for 8 knives Dimensions: 380 x 80 x 255 mm (15 x x 10"), plated Wood block: beech : Support rails polished chrome chrome matt nickel matt

97 Backsplash Railing System Wine Bottle and Glass Shelf, for 3 bottles Holds up to 3 wine bottles and 4 glasses Dimensions: 380 x 190 x 275 mm (15" x 7 1 / 2" x 10 7 / 8"), plated : Support rails/shelves polished chrome/aluminum chrome matt/aluminum nickel matt/stainless steel Utensil Holder, with 1 compartment Dimensions: 147 x 150 x 335 mm (5 7 / 8" x 6" x 13 1 / 8"), plated : Support rails/canister polished chrome/aluminum chrome matt/aluminum nickel matt/stainless steel Utensil Holder, with 3 compartments Dimensions: 380 x 150 x 370 mm (15" x 6" x 14 1 / 2"), plated : Support rails/canisters polished chrome/aluminum chrome matt/aluminum matt/stainless steel Plate/Utensil Holder Holds up to 4 plates, with 1 compartment Dimensions: 440 x 150 x 370 mm (17 3 / 8" x 6" x 14 1 / 2"), plated : Support rails/canister polished chrome/aluminum chrome matt/aluminum nickel matt/stainless steel Plate Holder Holds up to 12, 250 mm (10") plates Max. thickness 23 mm ( 7 / 8") Dimensions: 380 x 190 x 255 mm (15" x 7 1 / 2" x 10"), plated polished chrome chrome matt nickel matt

98 Backsplash Railing System Cleaning Supplies Rack Utility organizer for cleaning supplies and kitchen cloths Dimensions: 501 x 150 x 275 mm (19 7 / 8" x 6" x 10 7 / 8"), plated : Support rails/shelf polished chrome/aluminum chrome matt/aluminum nickel matt/stainless steel Towel Rail Length: 570 mm (22 3 / 8"), plated polished chrome chrome matt nickel matt Rail, with 6 hooks Length: 380 mm (15"), plated polished chrome chrome matt nickel matt Cookbook Holder Dimensions: 440 x 47 x 320 mm (17 3 / 8"x 1 7 / 8" x 12 1 / 2"), plated : Support rails/shelf polished chrome/aluminum chrome matt/aluminum nickel matt/stainless steel Memo Pad Holder Holds 1 paper pad, and up to 4 pens. Dimensions: 135 x 150 x 275 mm (5 3 / 8" x 6" x 10 7 / 8"), plated : Support rails/shelf polished chrome/aluminum chrome matt/aluminum nickel matt/stainless steel (includes memo pad and ball-point pen) Dimensions listed are width x depth x height 956

99 Countertop Supports Side mounts or mounts to countertop Bio-Fix products from Häfele. 40 (1 1 /8") 323 (12 3 /4") 150 (6") Side-mount Material: aluminum silver, matt anodized (includes mounting hardware) 100 (4") 199 (7 7 /8") 140 (5 1 /2") Material: aluminum silver, matt anodized (includes mounting hardware) 372 (14 5 /8") 100 (4") 170 (6 5 /8") 140 (5 1 /2") 270 (10 5 /8") Mounts on the countertop Material: aluminum silver, matt anodized (includes mounting hardware) max. 60 mm (2 1 /2") 100 (4") 140 (5 1 /2") 310 (12 1 /4") (8 1 /4") 170 (6 3 /4") max. 60 mm (2 1 /2") Max. 40 mm (1 1 /2") 240 (9 1 /2") 99 (3 7 /8") 100 (4") Material: aluminum silver, matt anodized (includes mounting hardware) Frame type Material: light alloy silver, matt anodized (includes mounting hardware)

100 Countertop Supports Maximum load capacity: 15 kg (33 lbs.) Maximum distance between supports: 600 mm (23 1 2") Bio-Fix products from Häfele. 200 mm (7 7 8") 200 mm (7 7 8") 90º Countertop support For solid tops Size: Ø 50 x 200 mm (2" x 7 7 8") chrome-plated matt chrome (includes mounting hardware) For glass tops Mounts on the countertop with glue to the glass Size: Ø 50 x 200 mm (2" x 7 7 8") chrome-plated matt chrome (includes mounting hardware) 20º 200 mm (7 7 8") 200 mm (7 7 8") Angled Countertop support slanted 20º For solid tops Size: Ø 50 x 200 mm (2" x 7 7 8") chrome-plated matt chrome (includes mounting hardware) Solid top Glass top Mounting application showing 90º support Flat Insert* For glass tops Mounts on the countertop with glue to the glass Size: Ø 50 x 200 mm (2" x 7 7 /8") chrome-plated matt chrome (includes mounting hardware) *Note: For the specification of a correct adhesive bond for the fitting of the glass top, please contact your glass supplier. 958

101 Shelf Suspension System For shelves suspended from the ceiling For attachment through wood or glass, a 14 mm hole is required 14 mm (9 3/4") Beta shelf suspension system Load carrying capacity: 50 kg (110 lbs.) per rod /brass, surface-threaded chrome polished chrome matt (includes 1 threaded rod M8X1000, 1 tube Ø 20 x 896 mm, 1 upper sleeve, 1 centering ring, 1 sleeve nut, 1 rubber clamping ring) Drill ø 12mm Suspension system 70 (6 3 /4") 24 (1") Intermediate supports, for additional ceiling shelves to the Beta suspension system Material: brass, electroplated chrome polished brass polished Packing: 1 [set] Text Change Intermediate supports X = Shelf thickness (glass: min. 10 mm) 959 ø 20mm X Max. 896 (36 1 /4") X

102 Ventilation Grills A E T Air ventilation grommets, recess-mounted Material: plastic Dimensions (mm) A E T white ø38 ø34 15 black Packing: 50 pcs. 48 (1 7 8") 44 (1 3 4") 7 Air ventilation cap, recess-mounted, with harpoon-type fitting Material: plastic white brown Packing: 50 pcs. 65 (2 9 16") 60 (2 3 8") 9 Air ventilation cap, recess-mounted Material: plastic white brown Packing: 50 pcs. 50 (2") 35 (1 3 8") 13 Air cap, recess-mounted, with harpoon-type fitting Material: plastic white Packing: 100 pcs. 123 (4 3 4") 99 (3 7 8") 2 11 Air ventilation cap, recess-mounted, with flanged rim Ventilation area cm 2 : 50.0 Material: plastic white Packing: 10 pcs. 960

103 Ventilation Grills 230 (9 1 16") 61 (2 7 16") 8 Air ventilation grill, with flanged rim Ventilation area cm 2 : Material: plastic 68 ( ") 220 (8 3 4") 2 chrome-plated Packing: 50 pcs. 227 (9") 60 (2 3 8") 2 Air ventilation grill, with flanged rim Ventilation area cm 2 : 60 Material: plastic 68 ( ") 220 (8 3 4") 7 white Packing: 50 pcs. 64 (2 1 2") 225 (8 7 8") 213 (8 3 8") 55 (2 3 16") 2 7 Air ventilation grill, with flanged rim and oval recess section, no holes, mounted by adhesive Ventilation area cm 2 : 45.0 Material: plastic chrome-plated Packing: 50 pcs. A C D B 2 13 Air ventilation grill, with flanged rim Material: plastic Dimensions (mm) Ventilation area white A B C D cm Packing: 10 pcs. 961

104 Lattice Grills Decorative grills for door panels. Slats are shaped and sanded prior to assembly, so that the grill can be varnished without further treatment Glued, triple-laminated slats are exceptionally resistant to warping Double-sided, sanded, and ready to stain Decorative and ventilation grills, rounded on one side Panel dimension: 1200 x 600 mm (47 1 /4 x 23 5 /8") Spaced 12 mm apart, the slats are arranged at 45 to the panel edges Material: natural wood, sanded Wood species Thickness beech 3.0 mm oak 3.4 mm maple 3.4 mm pine 3.0 mm cherry 2.0 mm Decorative and ventilation grills 5 mm thickness Panel dimension: 2000 x 800 mm (78 3 /4 x 31 1 /2") Spaced 15 mm apart, the slats are arranged diagonal at 45 to the panel edges Material: natural wood, sanded Wood species Packing maple pc. cherry pc. oak pcs. pine pcs. Decorative and ventilation grills 5 mm thickness Panel dimension: 2000 x 800 mm (78 3 /4 x 31 1 /2") Spaced 15 mm apart, the slats are arranged at 90 to the panel edges (square) Material: natural wood, sanded Wood species Packing maple pc. cherry pc. oak pcs. pine pcs. 962