Hinges For the furniture industry

Transcription

1 inges or the furniture industry

2

3 inges Index nyway Clip echnical details...2 Clip-on hinges for wooden doors Ø35 mm...8 Clip-on MINI hinges for wooden doors Ø26 mm Clip-on hinges for glass doors Ø26/30 mm Clip-on hinges for metal profiles...20 Clip-on hinges for wooden doors Ø40 mm Clip-on one way hinges for wooden doors Ø35 mm - 40 eries...29 Mounting plates...30 lide-on echnical details lide-on hinges for wooden doors Ø35 mm lide-on MINI hinges for wooden doors Ø26 mm lide-on hinges for glass doors Ø26/30 mm lide-on hinges for metal profiles lide-on hinges for wooden doorsø40 mm lide-on one way hinges for wooden doors Ø35 mm - 45 eries Mounting plates errari 1

4 inges nyway Clip echnical details bsolute safety against accidental release with the metal clip device nyway Clip hinges have a a particularly easy and safe release system that allows clipping of the hinge on the plate in any position. his characteristic gives maximum ease in mounting even on large doors where many hinges are required. Clip on hinges are available with automatic or manual door adjusting systems. rilling distance can be determined using the tables given for each type of hinge and door material. he following diagrams show the recommended number of hinges according to the weight of 600mm width doors. he number of hinges needed is determined by different factors such as door size, weight, consistency and material. or special requirements it is recommended to perform empirical tests. Codes inge codes Plate codes inge type C = inges = hallow cup hinges djustment 90 = rontal adjusting screw 91 = frontal adjusting cam Cup type (fixing opening drilling distance) inge arm inishing G = Copper+Nickel plating (*) Clip device type Plate type Number of premounted screws Material M = teel Z = Zamak inishing G = Copper+Nickel plating (*) Mounting plate height ype of premounted screws G G W (*) pecial finishing available on request B M G 4 5 B 1 N (*) pecial finishing available on request inges and plates range inges for wooden doors nyway Clip Ø35mm 95 /110 /125 opening nyway Clip Ø35mm 165 /170 opening nyway Clip Ø35mm inclined arm 95 opening nyway Clip Ø35mm blind corner 95 opening nyway Clip Ø35mm bi-fold 95 opening nyway Clip MINI Ø26mm 95 opening nyway Clip Ø40mm 95 opening Page... 8 Page Page Page Page Page Page x32 plates plates 28x32 plates PIO Vertical cam adjustment PIO Vertical cam adjustment or mounting plates see page 30 2 errari

5 Number of hinges per door kg 7 8 kg kg kg cm cm cm cm inges Ø26mm Width [cm] 60 Weight [Kg] eight [cm] inges [N] kg kg kg 8 13 kg cm cm cm cm inges Ø35/40mm Width [cm] 60 Weight [Kg] eight [cm] inges [N] inges for glass doors inges for metal profiles nyway Clip Ø40mm inclined arm 95 opening nyway Clip Ø40mm blind corner 95 opening nyway Clip Ø35mm 100 opening nyway Clip MINI Ø26/30mm 95 opening nyway Clip 95 opening nyway Clip inclined arm 95 opening nyway Clip blind corner 95 opening Page...26 Page...28 Page...29 Page Page...20 Page...22 Page...22 Plates 10x32 errari 3

6 inges nyway Clip echnical details Minum reveal and gap oor rotation requires a minimum reveal indicated in this catalogue by. herefore, the gap should be at least equal to the. Values of, calculated for standard doors, are shown in the tables. or special doors, please contact our echnical epartment. Plate height or each series and arm crank, the formula given in this catalogue you choose the correct mounting plate height. oor overlay is the overlay required, be sure that the value of is at least equal to, as indicated in the tables for each kind of hinge. inge arms inges of the same type are available with different arm cranks C to get different door overlays. djustments nyway Clip hinges allow independent adjustment of the door in the three dimensions. rm 0 17 mm rm 17 Mounting/emounting Mounting 1. ix the plate to the cabinet side 2. ix the hinge on the door 3. Mount the door on the cabinet side. he hinge can be clipped in any position emounting Unclip the hinge by pulling upwards with your finger (1) and then remove the hinge (2) errari

7 djustments Vertical adjustment With screw With cam on PIO plate (Zamak) oosen the fixing screws of the mounting plate djust the door vertically ix the plate Use the cam on the plate to obtain a continuous adjustment. With cam on PIO plate (teel) Use the cam on the plate to obtain a continuous adjustment.. ateral overlay adjustment Use the overlay screw on the arm to obtain a continuous adjustment. rontal adjustment With screw With cam 91 series oose the screw on the arm of the hinge. djust the door frontally. ight the screw. Use the cam on the clipping device to obtain a continuous adjustment. It is impossible to unintentionally release the hinge with this cam. errari 5

8 inges nyway Clip echnical detail systems Wood screw fixing. Knock-in 8mm or 10mm dowels fixing. Euroscrews fixing, premounted or not, 13mm length for Ø5mm holes. igit system igit is the simplest and fastest solution to mount and remove the hinge with no tools. handling of doors without hinges prevents surface damages. On site fitting in a few seconds assists the above. Reduction of packaging costs. Easy installation in all kinds of door materials, dowels expand where material is more solid to assure a perfect strength. ccurate and essential design as a result of continuous technological research. Mounting emounting Open completely both wings (1) Insert the hinge into the standard holes for 10mm dowels (2) Close both wings manually (3). Open both wings manually (1) Close the hinge arm (2) Pull it out vertically (3). peed system peed assures absolute ease in assembling and disassembling, with total safety and total strength. ess risk of surface damages and reduction of packing volumes and costs due to logistic semplification. Mounting emounting Insert the hinge into the standard holes for 10mm dowels (1) urn the eccentric screws 90 with a screwdriver until the red mark is covered (2). Using a screwdriver turn the eccentric screw counterclockwise until the red mark is uncovered(1) Close the hinge (2) Pull it out vertically (3). 6 errari

9 ccessories Cup and arm covers CUP COVER RM COVER * Black R 9005 CC90-2 CM01/ C Gray R 9006 CB03/GN CC90C-2 CC91G-M CC92G-M CM01/C B Withe R 9001 CC90B-2 Nickel-plated metal (available only for inge type Page Nickel-plated metal Nylon Nickel-plated metal cranks 0 and 3) Nylon 95 opening Ø35mm 110 opening Ø35mm 125 opening Ø35mm Inclined arm 95 opening Ø35mm Blind corner 95 opening Ø35mm Inclined arm 125 opening Ø35mm Bi-fold 95 opening Ø35mm 95 opening MINI Ø26mm 95 opening MINI Ø26/30mm for glass doors 95 opening for alu profiles 95 opening inclined arm for alu profiles 95 opening blind corner for alu profiles 95 opening Ø40mm 95 opening Ø40mm inclined arm 95 opening Ø40mm blind corner 100 opening Ø35mm 40 serie *Customized arm covers available on request (CC90 - CC91 and CC92) CC CB03/GN CC91G-M CC CC91G-M CB03/GN CC92G-M CC92G-M CM01/... Only for hinges CB03/GN for metal profiles CB03/GN errari 7

10 inges Clip on hinges for wooden door nyway Clip Ø35 mm opening 95 /110 /125 Ø 35 Crank 0 = 17 + Crank 3 = 14 + Ø cup hole 35 Opening 95 Cup drilling distance djustment Wood screws Knock-in dowels Euroscrews peed igit Wood screws Knock-in dowels Euroscrews peed igit Wood screws crew W90078GG* W90080GG* W90313GG* W90418GG* - W90078GG* W90080GG* W90313GG* W90418GG* - W90078BGG* Cam W91078GG* W91080GG* W91313GG* W91418GG* - W91078GG* W91080GG* W91313GG* W91418GG* - W91078BGG* crew W90086GG* W90090GG* W90068GG* W90406GG* C90500GG* W90086GG* W90090GG* W90068GG* W90406GG* C90500GG* W90086BGG* Cam W91086GG* W91090GG* W91068GG* W91406GG* C91500GG* W91086GG* W91090GG* W91068GG* W91406GG* C91500GG* W91086BGG* crew 90094GG* 90098GG* 90563GG* 90561GG* GG* 90098GG* 90563GG* 90561GG* BGG* 52 Cam 91094GG* 91098GG* 91563GG* 91561GG* GG* 91098GG* 91563GG* 91561GG* BGG* crew 98086GG* 98090GG* BGG* crew W90079GG* W90081GG* W90295GG* W90419GG* - W90079GG* W90081GG* W90295GG* W90419GG* - W90079BGG* 45 Cam W91079GG* W91081GG* W91295GG* W91419GG* - W91079GG* W91081GG* W91295GG* W91419GG* - W91079BGG* = plate height = drilling distance = overlay crew W90087GG* W90091GG* W90248GG* W90407GG* C90505GG* W90087GG* W90091GG* W90248GG* W90407GG* C90505GG* W90087BGG* Cam W91087GG* W91091GG* W91248GG* W91407GG* C91505GG* W91087GG* W91091GG* W91248GG* W91407GG* C91505GG* W91087BGG* crew 90095GG* 90099GG* 90314GG* 90551GG* GG* 90099GG* 90314GG* 90551GG* BGG* Cam 91095GG* 91099GG* 91314GG* 91551GG* GG* 91099GG* 91314GG* 91551GG* BGG* crew C90012ZGMG* C90016ZGMG* C90426ZGMG* Cam C91012ZGMG* C91016ZGMG* C91426ZGMG* crew C90028ZGMG* C90036ZGMG* C90414ZGMG* Cam C91028ZGMG* C91036ZGMG* C91414ZGMG* crew C90044ZGMG* C90052ZGMG* Cam C91044ZGMG* C91052ZGMG* = plate height = drilling distance = overlay rilling distances and cup fixing B Wood screw fixing Knock-in dowels fixing Premounted "peed" fast fixing "igit" no tools fixing Ø 35 euroscrews fixing B V501/G 4x16 Ø 8/10 Ø 5x10 Ø 10 Ø 10 inge protrusion inside the cabinet inge 95 opening inge 95 opening inge 110 opening inge 125 opening C C+4.4 +C C C C C C+4.4 = plate height - C = hinge arm = minimum reveal - = oor thickness 8 errari

11 Crank 9 = 8 + Crank 17 = + Crank 22 = + 5 = plate height = drilling distance = overlay Knock-in dowels Euroscrews peed igit = plate height = drilling distance = gap Wood Knock-in Wood screws dowels Euroscrews peed igit screws Opening Cup drilling distance P oor thickness Minimum reveal , Knock-in dowels Euroscrews peed igit W90080BGG* W90313BGG* W90418BGG* - W90078CGG* W90080CGG* W90313CGG* W90418CGG* - W90078GG* W90080GG* W90313GG* W90418GG* - W91080BGG* W91313BGG* W91418BGG* - W91078CGG* W91080CGG* W91313CGG* W91418CGG* - W91078GG* W91080GG* W91313GG* W91418GG* - W90090BGG* W90068BGG* W90406BGG* C90500BGG* W90086CGG* W90090CGG* W90068CGG* W90406CGG* C90500CGG* W90086GG* W90090GG* W90068GG* W90406GG* C90500GG* W91090BGG* W91068BGG* W91406BGG* C91500BGG* W91086CGG* W91090CGG* W91068CGG* W91406CGG* C91500CGG* W91086GG* W91090GG* W91068GG* W91406GG* C91500GG* 90098BGG* 90563BGG* 90561BGG* CGG* 90098CGG* 90563CGG* 90561CGG* GG* 90098GG* 90563GG* 90561GG* BGG* 91563BGG* 91561BGG* CGG* 91098CGG* 91563CGG* 91561CGG* GG* 91098GG* 91563GG* 91561GG* BGG* CGG* 98090CGG* W90081BGG* W90295BGG* W90419BGG* - W90079CGG* W90081CGG* W90295CGG* W90419CGG* W91081BGG* W91295BGG* W91419BGG* - W91079CGG* W91081CGG* W91295CGG* W91419CGG* W90091BGG* W90248BGG* W90407BGG* C90505BGG* W90087CGG* W90091CGG* W90248CGG* W90407CGG* C90505CGG* W91091BGG* W91248BGG* W91407BGG* C91505BGG* W91087CGG* W91091CGG* W91248CGG* W91407CGG* C91505CGG* BGG* 90314BGG* 90551BGG* CGG* 90099CGG* 90314CGG* 90551CGG* BGG* 91314BGG* 91551BGG* CGG* 91099CGG* 91314CGG* 91551CGG* Minimum reveal required = Gap Please note that the gap should always be at least equal to minimum reveal required * he code has to be completed with the suffix W referred to the clipping device = plate height = drilling distance = gap EMPE: G G W W = Metal clip device or mounting plates see page 30 errari 9

12 inges Clip on hinges for wooden door nyway Clip Ø35 mm opening 165 /170 Crank 0 = 17 + Crank 3 = 14 + Ø 35 Ø cup hole 35 Opening 165 or thick doors 170 or pull out units Cup drilling distance djustment rilling distances and cup fixing Wood screws = plate height = drilling distance = overlay Knock-in dowels Euroscrews peed Wood screws = plate height = drilling distance = overlay Knock-in dowels Euroscrews peed 45 crew C90430ZGMG* C90431ZGMG* C90574ZGMG* C90424ZGMG* C90430ZGZG* C90431ZGZG* C90574ZGZG* C90424ZGZG* 48 crew C90433ZGMG* C90435ZGMG* C90575ZGMG* C90416ZGMG* C90433ZGZG* C90435ZGZG* C90575ZGZG* C90416ZGZG* 52 crew C90437ZGMG* C90439ZGMG* C90576ZGMG* - C90437ZGZG* C90439ZGZG* C90576ZGZG* - 45 crew C90300ZGMG* C90301ZGMG* C90374ZGMG* C90422ZGMG* C90300ZGZG* C90301ZGZG* C90374ZGZG* C90422ZGZG* 48 crew C90304ZGMG* C90306ZGMG* C90375ZGMG* C90410ZGMG* C90304ZGZG* C90306ZGZG* C90375ZGZG* C90410ZGZG* 52 crew C90308ZGMG* C90310ZGMG* C90376ZGMG* - C90308ZGZG* C90310ZGZG* C90376ZGZG* - B Ø 35 Wood screw fixing Knock-in dowels fixing Premounted peed fast fixing euroscrews fixing B V501/G 4x16 Ø 8/10 Ø 5x10 Ø 10 inge protrusion inside the cabinet inge 165 opening inge 170 opening +C+42 +C C C C 11 +C C C+3.5 +C C = plate height C = hinge arm = drilling distance = door thickness = minimum reveal 10 errari

13 Crank 9 = 8 + Crank 17 = + = plate height = drilling distance = overlay = plate height = drilling distance = gap Wood screws Knock-in dowels Euroscrews peed Wood screws Knock-in dowels Euroscrews peed C90430BZGZG* C90431BZGZG* C90574BZGZG* C90424BZGZG* C90430CZGZG* C90431CZGZG* C90574CZGZG* C90424CZGZG* C90433BZGZG* C90435BZGZG* C90575BZGZG* C90416BZGZG* C90433CZGZG* C90435CZGZG* C90575CZGZG* C90416CZGZG* C90437BZGZG* C90439BZGZG* C90576BZGZG* - C90437CZGZG* C90439CZGZG* C90576CZGZG* - C90300BZGZG* C90301BZGZG* C90374BZGZG* C90422BZGZG* C90300CZGZG* C90301CZGZG* C90374CZGZG* C90422CZGZG* C90304BZGZG* C90306BZGZG* C90375BZGZG* C90410BZGZG* C90304CZGZG* C90306CZGZG* C90375CZGZG* C90410CZGZG* C90308BZGZG* C90310BZGZG* C90376BZGZG* - C90308CZGZG* C90310CZGZG* C90376CZGZG* - Minimum reveal required oor opening stoppers for 165 /170 hinges N095 N125 Opening Cup drilling distance P oor thickness Minimum reveal N150 he stoppers, one per hinge, can be easily inserted even when the door is already mounted and can be removed using a screwdriver. Please contact our technical epartment for special angle stoppers. = Gap Please note that the gap should always be at least equal to minimum reveal required * he code has to be completed with the suffix W referred to the clipping device EEMPIO: C Z G M G W W = Metal clip device or mounting plates see page 30 errari 11

14 inges Clip on hinges for wooden door inclined arm nyway Clip Ø35 mm opening 95 Inclined arm +45 Inclined arm with overlay Inclined Ø = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height Plate height Plate height Ø cup hole [mm Opening Cup drilling distance djustment Wood screws Knock-in dowels Euroscrews peed igit Wood screws Knock-in dowels Euroscrews peed igit Wood screws Knock-in dowels crew W90078EGG* W90080EGG* W90313EGG* W90418EGG* - W90078PGG* W90080PGG* W90313PGG* W90418PGG* - W90078GG* W90080GG* Cam W91078EGG* W91080EGG* W91313EGG* W91418EGG* W91078GG* W91080GG* crew W90086EGG* W90090EGG* W90068EGG* W90406EGG* C90500EGG* W90086PGG* W90090PGG* W90068PGG* W90406PGG* C90500PGG* W90086GG* W90090GG* Cam W91086EGG* W91090EGG* W91068EGG* W91406EGG* C91500EGG* C91500PGG* W91086GG* W91090GG* crew 90094EGG* 90098EGG* 90563EGG* 90561EGG* PGG* 90098PGG* 90563PGG* 90561PGG* GG* 90098GG* Cam 91094EGG* 91098EGG* 91563EGG* 91561EGG* GG* 91098GG* rilling distances and cup fixing B Ø 35 Wood screw fixing Knock-in dowels fixing "peed" fast fixing "igit" no tools fixing Premounted euroscrews fixing B V501/G 4x16 Ø 8/10 Ø 5x10 Ø 10 Ø errari

15 arm +30 Inclined arm +30 with overlay opening Inclined arm -30 Inclined arm Plate height Plate height Plate height Plate height Euroscrews peed igit Wood screws Knock-in dowels Euroscrews peed igit Wood screws Knock-in dowels Euroscrews Wood screws Knock-in dowels Euroscrews W90313GG* W90418GG* - W90078NGG* W90080NGG* W90313NGG* W90418NGG* - C90012ZGMG* C90016ZGMG* C90426ZGMG* C90012MZGMG* C90016MZGMG* C90426MZGMG* W91313GG* W91418GG* W90068GG* W90406GG* C90500GG* W90086NGG* W90090NGG* W90068NGG* W90406NGG* C90500NGG* C90028ZGMG* C90036ZGMG* C90414ZGMG* C90028MZGMG* C90036MZGMG* C90414MZGMG* W91068GG* W91406GG* C91500GG* GG* 90561GG* NGG* 90098NGG* 90563NGG* 90561NGG* - C90044ZGMG* C90052ZGMG* - C90044MZGMG* C90052MZGMG* GG* 91561GG* Minimum reveal required Opening Cup drilling distance P oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required * he code has to be completed with the suffix W referred to the clipping device EMPE: C Z G M G W W = Metal clip device or mounting plates see page 30 errari 13

16 inges Clip on hinges blind corner for wooden door nyway Clip Ø35 mm opening 95 Blind corner + 90 Blind corner short arm Ø 35 = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height Ø cup hole [mm Opening Cup drilling distance djustment Base height Knock-in dowels Euroscrews peed igit Base height Knock-in dowels Woodscrews Woodscrews Euroscrews peed igit crew W90078GGG* W90080GGG* W90313GGG* W90418GGG* IGG* 90080IGG* 90313IGG* 90418IGG* - Cam W91078GGG* W91080GGG* W91313GGG* W91418GGG* crew W90086GGG* W90090GGG* W90068GGG* W90406GGG* C90500GGG* 90086IGG* 90090IGG* 90068IGG* 90406IGG* C90500GGG* Cam W91086GGG* W91090GGG* W91068GGG* W91406GGG* C91500GGG* crew 90094GGG* 90098GGG* 90563GGG* IGG* 90098IGG* 90563IGG* - - Cam 91094GGG* 91098GGG* 91563GGG* rilling distances and cup fixing B Wood screw fixing Knock-in dowels fixing Premounted Ø 35 euroscrews fixing "peed" fast fixing "igit" no tools fixing B Minimum reveal required V501/G 4x16 * he code has to be completed with the suffix W referred to the clipping device EMPE: G G G W Ø 8/10 Ø 5x10 Ø 10 Ø 10 Opening 95 Cup drilling distance P oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required B2500ZG60 (wood screw fixing) or B2502ZG60B1 (premounted euroscrews) must be used with short blind corner arm hinges G = Copper-nickel-plated W = metal clip device or mounting plates see page errari

17 Clip on hinges for bi-fold wooden door nyway Clip Ø35 mm Crank 0 rilling distances and cup fixing B = 3 = 4.5 Ø B Ø Wood screws fixing Knock-in dowels fixing = rilling distance = Plate height Ø cup hole [mm Cup drilling distance djustment Wood screws Knock-in dowels V501/G 4x16 Ø 8/ crew C90730GMGZG* C90731GMGZG* 48 crew C90732GMGZG* C90734GMGZG* pplication and mounting instructions liding devices o prevent the contact with an adiacent door or other objects, the accessories 9NG and 9PNG are available to be mounted on the top of the door and on the cabinet in correspondance one to each other. 9NG 9PNG o be used with 170 hinges 1 2 ront view Upper view * he code has to be completed with the suffix W referred to the clipping device EMPE: C G M G Z G W W = Metal clip device or mounting plates see page 30 errari 15

18 inges inges MINI clip for wooden door nyway Clip Ø26 mm opening 95 Crank 3 = 14 + Crank 9 = 8 + Ø = plate height = drilling distance = overlay = plate height = drilling distance = overlay Ø cup hole Opening Cup drilling distance djustment Wood screws Knock-in dowels Euroscrews peed Wood screws Knock-in dowels Euroscrews crew C90120MGZG* C90121MGZG* C90064MGZG* C90412MGZG* C90120BMGZG* C90121BMGZG* C90064BMGZG* inge protrusion inside the cabinet B Ø 26 Wood screw fixing Premounted Knock-in dowels fixing "peed" fast fixing euroscrews fixing B 7.5 V501/G 4x16 Ø 5x10 Ø 8 Ø 10 inge protrusion inside the cabinet Crank C-1 = plate height C = crank 3/9/17 16 errari

19 Crank 17 = + Inclined arm = plate height = drilling distance = gap Base height = drilling distance = plate fixing distance = overlay = minimum reveal = plate height peed Wood screws Knock-in dowels Euroscrews peed Wood screws Knock-in dowels Euroscrews peed C90412BMGZG* C90120CMGMG* C90121CMGMG* C90064CMGMG* C90412CMGMG* C90120MGZG* C90121MGZG* C90064MGZG* C90412MGZG* Minimum reveal required Opening 95 Cup drilling distance oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required * he code has to be completed with the suffix W referred to the clipping device EMPE: C M G Z G W W = Metal clip device or mounting plates see page 30 errari 17

20 inges inges MINI clip for glass door nyway Clip Ø26/30 mm opening 95 Crank 3 = 14 + Crank 9 = 8 + Ø 26/30 95 Ø cup hole Opening djustment = plate height = drilling distance = overlay = plate height = drilling distance = overlay crew C90315NZG* C90315BNZG* 30 crew C90370NZG* C90370BNZG* inge fixing he hinge is mounted on the glass door connecting the ring to the cup with two screws. Once it is mounted connecting ring and screws are completely covered by the external face plate. crew code V220/G ace plate inge protrusion inside the cabinet +C-2 Ring 8.5 = plate height C = crank 3/9/17 = min. 3.5 mm; max. = 6.0 mm 18 errari

21 Crank 17 = + Inclined arm = plate height = drilling distance = gap C90315CNMG* C90370CNMG* Base height C90315NZG* C90370NZG* = drilling distance = plate fixing distance = overlay = minimum reveal = plate height Rings and ace plates Ø mm Ring ace plate Colour imensions G226 Black G226 Brown G2261 White 26 G26 G2264 Chrome G226 Gold G226C3 luminium G2265 Chrome satin G227 Black G227 Brown G2271 White 26 G37 G22764 Chrome G227 Gold G227C3 luminium G2275 Chrome satin G230 Black G230 Brown G2301 White 30 G30 G23064 Chrome G230 Gold G230C3 luminium G2305 Chrome satin 41 Ø Ø * he code has to be completed with the suffix W referred to the clipping device EMPE: C N Z G W W = Metal clip device or mounting plates see page 30 errari 19

22 inges P inges for metal profiles nyway Clip opening 95 rm crank 0 = P + 1 rm crank 3 = P 2 Opening 95 djustment Interax = plate height P = profile width = overlay = plate height P = profile width = overlay 95 crew 36 C90350ZGMG* C90350ZGMG* Cam C91350ZGMG* C91350ZGMG* inge protrusion inside the cabinet Profile boring scheme +C C-4.4 P P P (10) 17.1 min 8.7 = plate height C = crank 3/9/17 = door thickness P min = mm P max = 22 mm V233/G CM01/ black CM01/C grey 20 errari

23 rm crank 9 = P 8 rm crank 17 = P 16 + P P = plate height P = profile width = overlay = plate height P = profile width = gap C90350BZGMG* C90350CZGMG* C91350ZGMG* C91350CZGMG* Minimum reveal required P Opening 95 Cup drilling distance P oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required * he code has to be completed with the suffix W referred to the clipping device EEMPIO: C Z G M G W W = Metal clip device or mounting plates see page 30 errari 21

24 inges inges clip for metal profile inclined arm nyway Clip opening 95 P Inclined arm +45 Inclined arm +45 with overlay 95 = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height = oor thickness Opening djustment Interax Base height P Base height P crew 36 C90350EZGMG* C90350PZGMG* Cam C91350EZGMG* - P inges clip blind corner arm for metal profiles nyway Clip opening 95 Blind corner arm + 90 Blind corner short arm + 90 = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height = oor thickness 95 Opening djustment Interax Base height P Base height 6.0 P crew 36 C90350GZGMG* C90350IZGMG* Cam C91350GZGMG* - * he code has to be completed with the suffix W referred to the clipping device B2500ZG60 (wood screw fixing) or B2502ZG60B1 (premounted euroscrews) must be used with short blind corner arm hinges EMPE: C Z G M G W or mounting plates see page 30 W = metal clip 22 errari

25 Inclined arm +30 Inclined arm +30 with overlay Base height P Base height P C90350ZGMG* C90350NZGMG* C91350ZGMG* - Profile boring scheme Minimum reveal required P (10) Opening 95 Cup drilling distance P oor thickness Minimum reveal P min = mm P max = 22 mm V233/G P 17.1 min CM01/ black CM01/C grey = Gap Please note that the gap should always be at least equal to minimum reveal required errari 23

26 inges Clip on hinges for wooden door nyway Clip Ø40 mm opening 95 rm crank 0 = 22 + rm crank 3 = 19 + Ø 40 Ø cup hole Opening Cup drilling distance djustment Wood screws Knock-i n dowels peed Wood screws Knock-in dowels peed crew C90074MGMG* C90076MGMG* C90102MGMG* C90074MGMG* C90076MGMG* C90102MGMG* Cam C91074MGMG* C91076MGMG* C91102MGMG* C91074MGMG* C91076MGMG* C91102MGMG* B Ø = plate height = cup drilling distance = overlay = plate height = cup drilling distance = overlay rilling distances and cup fixing Wood screw fixing Knock-in dowels fixing "peed" fast fixing B 7.5 V501/G 4x16 Ø 10 Ø 10 inge protrusion inside the cabinet +C+3.5 +C errari

27 rm crank 9 = 13 + rm crank 17 = 5 + rm crank 22 = + = plate height = cup drilling distance = overlay = plate height = cup drilling distance = overlay = plate height = cup drilling distance = gap Wood screws Knock-in dowels peed Wood screws Knock-in dowels peed Wood screws Knock-in dowels peed C90074BMGMG* C90076BMGMG* C90102BMGMG* C90074CMGMG* C90076CMGMG* C90102CMGMG* C90074MGZG* C90076MGZG* C90102MGZG* C91074BMGMG* C91076BMGMG* C91102BMGMG* C91074CMGMG* C91076CMGMG* C91102CMGMG* Minimum reveal required Opening 95 Cup drilling distance oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required * he code has to be completed with the suffix W referred to the clipping device EEMPIO: C M G M G W W = Metal clip device or mounting plates see page 30 errari 25

28 inges Clip on hinges for wooden door inclined arm nyway Clip Ø40 mm 95 opening Inclined arm +45 Inclined arm +45 with overlay Ø 40 Base height Base height Ø cup hole Opening Cup drilling distance djustment Wood screws Knock-i n dowels peed Wood screws Knock-i n dowels peed crew C90074EMGZG* C90076EMGZG* C90102EMGZG* C90074PMGZG* C90076PMGZG* C90102PMGZG* rilling distances and cup fixing B Ø 40 Wood screw fixing Knock-in dowels fixing "peed" fast fixing 95 = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height B 7.5 V501/G 4x16 Ø 10 Ø errari

29 Inclined arm +30 Inclined arm +30 with overlay Base height Base height Wood screws Knock-i n dowels peed Wood screws Knock-i n dowels peed C90074MGZG* C90076MGZG* C90102MGZG* C90074NMGZG* C90076NMGZG* C90102NMGZG* Minimum reveal required Opening 95 Cup drilling distance oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required * he code has to be completed with the suffix W referred to the clipping device EMPE: C M G Z G W W = Metal clip device or mounting plates see page 30 errari 27

30 inges Clip on hinges blind corner arm for wooden doors nyway Clip Ø40 mm 95 opening Blind corner arm 12.2 Ø 40 = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height Base height Ø cup hole Opening Cup drilling distance djustment Wood screws Knock-i n dowels peed crew C90074GMGZG* C90076GMGZG* C90102GMGZG* rilling distances and cup fixing B Ø 40 Wood screw fixing Knock-in dowels fixing "peed" fast fixing B 7.5 V501/G 4x16 Ø 10 Ø 10 Minimum reveal required Opening 95 Cup drilling distance oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required * he code has to be completed with the suffix W referred to the clipping device EMPE: C G M G Z G W W = Metal clip device or mounting plates see page errari

31 Clip on hinges with one way spring for wooden doors nyway Clip Ø35 mm opening eries 40 rm crank 0 = 17 + rm crank 9 = 8 + Ø 35 = rilling distance = Plate height = Overlay Ø cup hole Opening Cup drilling distance djustment Wood screws Knock-in dowels Euroscrews peed Wood screws Knock-in dowels Euroscrews peed crew W40V22GG* W4022GG* W40P22GG* W4022GG* W40V22BGG* W4022BGG* W40P22BGG* W4022BGG* rilling distances and cup fixing B Wood screw fixing Knock-in dowels fixing Premounted "peed" fast fixing Ø 35 euroscrews fixing B 6 V501/G 4x16 Ø 10 Ø 5x10 Ø 10 Opening 100 Cup drilling distance oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required * he code has to be completed with the suffix W referred to the clipping device EMPE: C 4 0 V 2 2 G G W W = metal clip device errari 29

32 inges Mounting plates fixing and adjustments or nyway Clip hinges Mounting plates fixing Wood screws Euroscrews Expanding dowels Pre-mounted 3 Pre-mounted 5 Pre-mounted Pre-mounted Base 37x32 Reversible +2 V501/G 4x16 (*) Complete the code with: 1 = Ø 3.9 x 12.5 mm 2 = Ø 3.9 x 14.5 mm (**) Complete the code with: B2 = Ø 6.3 x 10 mm B1 = Ø 6.3 x 14 mm 1 = Ø 6.3 x 16 mm (***) Complete the code with: 1 = Ø 3.9 x 12.5 mm 2 = Ø 3.9 x 14.2 mm 3.5 B1410ZG35N B1712MG35(*) B1002MG35(**)N B1282MG35(***) B1022MG35(***) 4.5 B1410MG45N B1712MG45(*) B1002MG45(**)N B1282MG45(***) B1022MG45(***) B1410MG60N B1712MG60(*) B1002MG60(**)N B1282MG60(***) B1022MG60(***) 12 B1370ZG12N B1382ZG12(**)N B1282ZG12(***) B1022ZG12(***) Reversible x B1170ZG45N B1182ZG45(**)N B1180ZG60N B1182ZG60(**)N 10x B0780ZG45N B0792ZG45(**)N B0780ZG80N B0792ZG80(**)N x32 vertical adjustment with cam 4.5 B2970MG B2970MG x32 vertical adjustment with cam PIO +1.5 Reversible Zamak B2150ZG35 B2192ZG35E9 B2172ZG35(**) B2182ZG B2150ZG45 B2192ZG45E9 B2172ZG45(**) B2182ZG B2150ZG60 B2192ZG60E9 B2172ZG60(**) B2182ZG601 37x32 vertical adjustment with cam PIO Reversible +2 teel x32 vertical adjustment with cam PIO teel B4402MG45G2 B4002MG45(**) 6.0 B4402MG60G2 B4002MG60(**) 4.5 B4442MG45G2 B4102MG45(**) 6.0 B4442MG60G2 B4102MG60(**) errari

33 Knock-in dowels Pre-mounted 10 ast fixing Pre-mounted 10 ifferent blocks can be combined with nyway clip mounting plates 37x32 euroscrews fixing, to solve particular mounting problems. he inclined bloc, symmetrical, can be mounted at positive or negative angles with respect to the sides. P6B01 P6B02 P6B03 P6B04 P2401 chromed P2402 chromed P2403 chromed P2404 chromed B1010MG35M2 B1010MG45M2 B1010MG60M2 B1390ZG12RN B1030ZG35N B1030ZG45N B1030ZG60N BIZ B5410MG35 B5410MG45 B5410MG60 crew V226/G crew V223/G crew V224/G crew V223/G Mounting plate with fast fixing system BIZ Blitz is the new fixing system that makes easier and faster the mounting by only half turn of the screwdriver. he screw is completely inserted in the dowel to avoid the accidental dismounting during transport. he 10mm diameter expandable dowels assures a perfect strenght with alla types of materials. Minimum encumbrance and mounting times drastically reduced. New adjustable plate PIO New reversible and symmetrical plate with patented cam adjustment. With the patented cam system the door can be vertically and parallely adjusted ensuring a perfect door strenght in any position and preventing any door sag. Once the adjustment is made the hinge an the plate remain along the same axis. B2160ZG35 B2160ZG45 B2160ZG60 B4300MG45 B4300MG60 errari 31

34 inges lide-on hinges echnical details lide-on hinges are mounted by a simple sliding movement. he plate is designed in such a way to allow correct mounting of the hinge even in any of the possible adjustments lide-on hinges are available with automatic or manual door adjusting systems. rilling distance can be determined using the tables given for each type of hinge and door material. he following diagrams show the recommended number of hinges according to the weight of 600mm width doors. he number of hinges needed is determined by different factors such as door size, weight, consistency and material. or special requirements it is recommended to perform empirical tests. Codes inge codes Plate codes inge type C = inges = hallow cup hinges 95 = inges series Cup type (fixing opening drilling distance) inge arm inishing G = Copper+Nickel plating (*) Plate type Number of premounted screws Material M = teel Z = Zamak inishing G = Copper+Nickel plating (*) Mounting plate height Pre mounted screw type description code G G (*) pecial finishing available on request B M G 4 5 E 2 (*) pecial finishing available on request inges and plates range inges for wooden doors lide-on Ø35mm 95 /110 /125 opening lide-on Ø35mm 165 /170 opening lide-on Ø35mm inclined arm 95 opening lide-on Ø35mm blind corner 95 opening lide-on Ø35mm bi-fold 95 opening lide-on MINI Ø26mm 95 opening lide-on Ø40mm 95 opening Page...38 Page...40 Page...42 Page...44 Page...45 Page...46 Page...54 Plates 37x32 Plates 10x32 COMPO angle adjustment PIO vertical cam adjustment or mounting plates see page errari

35 Number of hinges per door kg 7 8 kg kg kg cm cm cm cm inges Ø26mm Width [cm] 60 Weight [Kg] eight [cm] inges [N] kg kg kg 8 13 kg cm cm cm cm inges Ø35/40mm Width [cm] 60 Weight [Kg] eight [cm] inges [N] inges for glass doors inges for metal profiles lide-on Ø40mm inclined arm 95 opening lide-on Ø40mm blind corner 95 opening lide-on Ø35mm 100 opening lide-on MINI Ø26/30mm 95 opening lide-on 95 opening lide-on inclined arm 95 opening lide-on blind corner 95 opening Page...56 Page...58 Page...59 Page...48 Page...50 Page...52 Page...52 errari 33

36 inges lide-on echnical details Minum reveal and gap oor rotation requires a minimum reveal indicated in this catalogue by. herefore, the gap should be at least equal to the. Values of, calculated for standard doors, are shown in the tables. or special doors, please contact our echnical epartment. Plate height or each series and arm crank, the formula given in this catalogue let you choose the correct mounting plate height. oor overlay is the overlay required, be sure that the value of is at least equal to, as indicated in the tables for each kind of hinge. inge arms inges of the same type are available with different arm cranks C to get different door overlays. djustments lide-on hinges allow independent adjustment of the door in the three dimensions. rm 0 17 mm rm 17 Mounting/emounting Mounting 1. ix the plate to the cabinet side 2. ix the hinge on the door 3. Mount the door on the cabinet side inserting the hinge on the mounting plate. he screw on the hinge must be inserted in the hole on the plate. ix the hinge on the plate tightening the central screw. emounting oose the fixing screw (1) and then remove the hinge. 34 errari

37 djustments Vertical adjustment With screw oose the fixing screws of the mounting plate. djust the door vertically. ix the plate. With cam on PIO plate (teel) + - Use the cam on the plate to obtain a continuous adjustment. ateral overlay adjustment + - Use the overlay screw on the arm to obtain a continuous adjustment. rontal adjustment With screw oose the screw on the plate. djust the door frontally. ighten the screw ngle adjustment With COMPO plate - oose the screw on back of the plate. errari djust the angle. ighten the screw. 35

38 inges lide-on echnical details igit system Wood screw fixing. Knock-in 8mm or 10mm dowels fixing. Euroscrews fixing, premounted or not, 13mm length for Ø5mm holes. igit is the simplest and fastest solution to mount and remove the hinge with no tools. andling of doors without hinges prevents surface damages. On site fitting in a few seconds assists the above. Reduction of packaging costs. Easy installation in all kinds of door materials, dowels expand where material is more solid to assure a perfect strength. ccurate and essential design as a result of continuous technological research. Mounting emounting Open completely both wings (1) Insert the hinge into the standard holes for 10mm dowels (2) Close both wings manually (3). Open both wings manually (1) Close the hinge arm (2) Pull it out vertically. peed system peed assures absolute ease in assembling and disassembling, with total safety and total strength. ess risk of surface damages and reduction of packing volumes and costs due to logistic semplification. Mounting emounting Insert the hinge into the standard holes for 10mm dowels (1) urn the eccentric screws 90 with a screwdriver until the red mark is covered (2). Using a screwdriver turn the eccentric screw counterclockwise until the red mark is uncovered (1). Close the hinge (2). Pull it out vertically (3). 36 errari

39 ccessories Cup and arm covers CUP COVER RM COVER * Black R 9005 CC90-2 CM01/ C Gray R 9006 CB03/GN CC90C-2 CC91G-M CC92G-M CM01/C B Withe R 9001 CC90B-2 inge type Page Nickel-plated metal Nylon Nickel-plated metal Nickel-plated metal (available only for cranks 0 and 3) Nylon 95 opening Ø35mm n n n n 110 opening Ø35mm n n n n 125 opening Ø35mm n n n Inclined arm 95 opening Ø35mm n n n n Blind corner 95 opening Ø35mm n n n n Inclined arm 125 opening Ø35mm n n n Bi-fold 95 opening Ø35mm n n n 95 opening MINI Ø26mm n n n 95 opening MINI Ø26/30mm for glass doors n n n 95 opening for alu profiles n n n n 95 opening inclined arm for alu profiles n n n n 95 opening blind corner for alu profiles n n n n 95 opening Ø40mm n n n 95 opening Ø40mm inclined arm n n n 95 opening Ø40mm blind corner n n n 100 opening Ø35mm 40 serie n n n n * Customized arm covers available on request (CC90 - CC91 and CC92) CC CC CB03/GN CC91G-M CC91G-M CB03/GN CC92G-M CC92G-M CB03/GN CM01/... Only for hinges for metal profiles CB03/GN errari 37

40 inges lide-on hinges for wooden door lide-on - Ø35 mm opening 95 /110 /125 Crank 0 = 17 + Crank 3 = 14 + Ø Ø cup hole 35 Opening 95 Cup drilling distance 45 djustment Wood screws Knock-in dowels Euroscrews peed igit Wood screws Knock-in dowels Euroscrews peed igit Wood screws W90078GG W90080GG W90313GG W90418GG - W90078GG W90080GG W90313GG W90418GG - W90078BGG 48 crew W95086GG W95090GG W95068GG W95406GG C95500GG W95086GG W95090GG W95068GG W95406GG C95500GG W95086BGG GG 95098GG 95563GG 95561GG GG 95098GG 95563GG 95561GG BGG crew 97086GG 97090GG BGG 45 W95079GG W95081GG W95295GG W95419GG - W95079GG W95081GG W95295GG W95419GG - W95079BGG crew W95087GG W95091GG W95248GG W95407GG C95505GG W95087GG W95091GG W95248GG W95407GG C95505GG W95087BGG GG 95099GG 95314GG 95551GG GG 95099GG 95314GG 95551GG BGG 45 C95012ZGMG C95016ZGMG C95426ZGMG crew C95028ZGMG C95036ZGMG C95414ZGMG C95044ZGMG C95052ZGMG rilling distances and cup fixing B Ø 35 = plate height = drilling distance = overlay = plate height = drilling distance = overlay Wood screw fixing Knock in dowels fixing Premounted "peed" fast fixing "igit" no tools fixing euroscrews fixing B V501/G 4x Ø 8/10 Ø 5x10 Ø 10 Ø 10 inge protrusion inside the cabinet inges opening 95 inges opening 110 inges opening 125 = Plate height C = rm 0/3/9/17/22 = oor thickness = Minimum reveal 38 errari

41 Crank 9 = 8 + Crank 17 = + Crank 22 = + 5 = plate height = drilling distance = overlay = plate height = drilling distance = gap = plate height = drilling distance = gap Wood Knock-in Wood screws dowels Euroscrews peed igit screws Knock-in dowels Euroscrews peed igit Knock-in dowels Euroscrews peed igit W90080BGG W90313BGG W90418BGG - W90078CGG W90080CGG W90313CGG W90418CGG - W90078GG W90080GG W90313GG W90418GG - W95090BGG W95068BGG W95406BGG C95500BGG W95086CGG W95090CGG W95068CGG W95406CGG C95500CGG W95086GG W95090GG W95068GG W95406GG C90500GG 95098BGG 95563BGG 95561BGG CGG 95098CGG 95563CGG 95561CGG GG 95098GG 95563GG 95561GG BGG CGG 97090CGG W95081BGG W95295BGG W95419BGG - W95079CGG W95081CGG W95295CGG W95419CGG W95091BGG W95248BGG W95407BGG C95505BGG W95087CGG W95091CGG W95248CGG W95407CGG C95505CGG BGG 95314BGG 95551BGG CGG 95099CGG 95314CGG 95551CGG Minimum reveal required Opening Cup drilling distance oor thickness Minimum reveal , = Gap Please note that the gap should always be at least equal to minimum reveal required or mounting plates see page 60 errari 39

42 inges lide-on hinges for wooden door lide-on - Ø35 mm opening 165 /170 Crank 0 = 17 + Crank 3 = 14 + Ø 35 Ø cup hole 35 Opening 165 or thick doors 170 or pull out units Cup drilling distance 45 djustment Wood screws Knock-in dowels Euroscrews peed Wood screws Knock-in dowels Euroscrews peed C95430ZGMG C95431ZGMG C95574ZGMG C95424ZGMG C95430ZGZG C95431ZGZG C95574ZGZG C95424ZGZG 48 crew C95433ZGMG C95435ZGMG C95575ZGMG C95416ZGMG C95433ZGZG C95435ZGZG C95575ZGZG C95416ZGZG 52 C95437ZGMG C95439ZGMG C95576ZGMG - C95437ZGZG C95439ZGZG C95576ZGZG - 45 C95300ZGMG C95301ZGMG C95374ZGMG C95422ZGMG C95300ZGZG C95301ZGZG C95374ZGZG C95422ZGZG 48 crew C95304ZGMG C95306ZGMG C95375ZGMG C95410ZGMG C95304ZGZG C95306ZGZG C95375ZGZG C95410ZGZG 52 C95308ZGMG C95310ZGMG C95376ZGMG - C95308ZGZG C95310ZGZG C95376ZGZG - rilling distances and cup fixing B Ø 35 Wood screw fixing Knock-in dowels fixing Premounted "peed" fast fixing euroscrews fixing B V501/G 4x16 Ø 8/10 Ø 5x10 Ø 10 inge protrusion inside the cabinet inges opening 165 inges opening 170 +C C C C C = plate height = drilling distance = overlay = plate height = drilling distance = overlay 11 +C C+3.5 +C C = Plate height C = rm 0/3/9/17 = rilling distance = oor thickness = Minimum reveal 40 errari

43 Crank 9 = 8 + Crank 17 = + Wood screws Knock-in dowels Euroscrews peed Wood screws Knock-in dowels Euroscrews peed C95430BZGZG C95431BZGZG C95574BZGZG C95424BZGZG C95430CZGZG C95431CZGZG C95574CZGZG C95424CZGZG C95433BZGZG C95435BZGZG C95575BZGZG C95416BZGZG C95433CZGZG C95435CZGZG C95575CZGZG C95416CZGZG C95437BZGZG C95439BZGZG C95576BZGZG - C95437CZGZG C95439CZGZG C95576CZGZG - C95300BZGZG C95301BZGZG C95374BZGZG C95422BZGZG C95300CZGZG C95301CZGZG C95374CZGZG C95422CZGZG C95304BZGZG C95306BZGZG C95375BZGZG C95410BZGZG C95304CZGZG C95306CZGZG C95375CZGZG C95410CZGZG C95308BZGZG C95310BZGZG C95376BZGZG - C95308CZGZG C95310CZGZG C95376CZGZG - Minimum reveal required oor opening stoppers for 165 /170 hinges = plate height = drilling distance = overlay = plate height = gap = drilling distance he stoppers, one per hinge, can be easily inserted even when the door is already mounted and can be removed using a screwdriver. Please contact our technical epartment for special angle stoppers. N095 N125 Opening Cup drilling distance oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required N150 or mounting plates see page 60 errari 41

44 inges lide-on hinges for wooden door inclined arm lide-on - Ø35 mm opening 95 Inclined arm +45 Inclined arm with overlay +45 Inclined Ø = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height Plate height Plate height Ø cup hole [mm Opening Cup drilling distance 45 djustment Wood screws Knock-in dowels Euroscrews peed igit Wood screws Knock-in dowels Euroscrews peed igit Wood screws Knock-in dowels W95078EGG W95080EGG W95313EGG W95418EGG - W95078PGG W95080PGG W95313PGG W95418PGG - W95078GG W95080GG 48 crew W95086EGG W95090EGG W95068EGG W95406EGG C95500EGG W95086PGG W95090PGG W95068PGG W95406PGG C95500PGG W95086GG W95090GG EGG 95098EGG 95563EGG 95561EGG PGG 95098PGG 95563PGG 95561PGG GG 95098GG rilling distances and cup fixing B Ø 35 Wood screw fixing Knock-in dowels fixing Premounted "peed" fast fixing "igit" no tools fixing euroscrews fixing B V501/G 4x16 Ø 8/10 Ø 5x10 Ø 10 Ø errari

45 125 opening arm +30 Inclined arm with overlay +30 Inclined arm -30 Inclined arm Plate height Plate height Plate height Plate height Euroscrews peed igit Wood screws Knock-in dowels Euroscrews peed igit Wood screws Knock-in dowels Euroscrews Wood screws Knock-in dowels Euroscrews W95313GG W95418GG - W95078NGG W95080NGG W95313NGG W95418NGG - C95012ZGMG C95016ZGMG C95426ZGMG C95012MZGMG C95016MZGMG C95426MZGMG W95068GG W95406GG C95500GG W95086NGG W95090NGG W95068NGG W95406NGG C95500NGG C95028ZGMG C95036ZGMG C95414ZGMG C95028MZGMG C95036MZGMG C95414MZGMG 95563GG 95561GG NGG 95098NGG 95563NGG 95561NGG - C95044ZGMG C95052ZGMG - C95044MZGMG C95052MZGMG - Minimum reveal required Opening Cup drilling distance P oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required or mounting plates see page 60 errari 43

46 inges lide-on hinges blind corner for wooden door lide-on - Ø35 mm opening 95 Blind corner Ø min = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height Base height Ø cup hole Opening Cup drilling distance djustment Woodscrews Knock-in dowels Euroscrews peed igit 45 W95078GGG W95080GGG W95313GGG W95418GGG - 48 crew W95086GGG W95090GGG W95068GGG W95406GGG C95500GGG GGG 95098GGG 95563GGG - - rilling distances and cup fixing B Ø 35 Wood screw fixing Knock-in dowels fixing Premounted "peed" fast fixing "igit" no tools fixing euroscrews fixing B V501/G 4x16 Ø 8/10 Ø 5x10 Ø 10 Ø 10 Minimum reveal required Opening 95 Cup drilling distance P oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required 44 errari

47 lide-on hinges for bi-fold wooden door lide-on - Ø35 mm Crank 0 = 4,5 rilling distances and cup fixing B = 3 Ø B Ø Wood screws fixing Knock-in dowels fixing = rilling distance = Plate height 10 Ø cup hole Cup drilling distance Wood screws Knock-in dowels V501/G 4x16 Ø 8/ C95730GMGZG C95731GMGZG 48 C95732GMGZG C95734GMGZG pplication and mounting instructions liding devices o prevent the contact with an adiacent door or other objects, the accessories 9NG and 9PNG are available to be mounted on the top of the door and on the cabinet in correspondance one to each other. o be used with 170 hinges ront vi ew Upper view or mounting plates see page 60 errari 45

48 inges MINI slide-on hinges for wooden door lide-on - Ø26 mm opening 95 Crank 3 = 14 + Crank 9 = 8 + Ø 26 Ø cup hole Opening Cup drilling distance djustment Wood screws Knock-in dowels Euroscrews peed Wood screws Knock-in dowels Euroscrews crew C95120MGZG C95121MGZG C95064MGZG C95412MGZG C95120BMGZG C95121BMGZG C95064BMGZG B Ø 26 Wood screw fixing Premounted Knock-in dowels fixing "peed" fast fixing euroscrews fixing = plate height = drilling distance = overlay = plate height = drilling distance = overlay rilling distances and cup fixing B 7.5 V501/G 4x16 Ø 8 Ø 5x10 Ø 10 inge protrusion inside the cabinet Crank C-1 = plate height C = crank 3/9/17 46 errari

49 Crank 17 = + Inclined arm = plate height = drilling distance = gap Base height = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height peed Wood screws Knock-in dowels Euroscrews peed Wood screws Knock-in dowels Euroscrews peed C95412BMGZG C95120CMGMG C95121CMGMG C95064CMGMG C95412CMGMG C95120MGZG C95121MGZG C95064MGZG C95412MGZG Minimum reveal required Opening 95 Cup drilling distance oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required or mounting plates see page 60 errari 47

50 inges MINI slide-on hinges for glass door lide-on - Ø26/30 mm apertura 95 rm crank 3 = 14 + rm crank 9 = 8 + Ø 26/30 95 Ø cup hole djustment Opening 26 = plate height = drilling distance = overlay = plate height = drilling distance = overlay C95315NZG C95315BNZG crew C95370NZG C95370BNZG inge fixing he hinge is mounted on the glass door connecting the ring to the cup with two screws. Once it is mounted connecting ring and screws are completely covered by the external face plate. inge protrusion inside the cabinet ace plate C-2 crew code V220/G Ring 8.5 = plate height C = crank 3/9/17 = min. 3.5 mm; max. = 6.0 mm 48 errari

51 rm crank 17 = + rm crank = plate height = drilling distance = gap C95315CNZG C95370CNZG Base height C95315NZG C95370NZG = drilling distance = plate fixing distance = overlay = minimum reveal = plate height Rings and ace plates Ø mm Ring ace plate Colour imensions G226 Black G226 Brown G2261 White 26 G26 G2264 Chrome G226 Gold G226C3 luminium G2265 Chrome satin G227 Black G227 Brown G2271 White 26 G37 G22764 Chrome G227 Gold G227C3 luminium G2275 Chrome satin G230 Black G230 Brown G2301 White 30 G30 G23064 Chrome G230 Gold G230C3 luminium G2305 Chrome satin 41 Ø Ø or mounting plates see page 60 errari 49

52 inges P lide-on hinges for metal profiles lide-on - opening 95 rm crank 0 = P + 1 rm crank 3 = P 2 Opening 95 djustment Interax crew C95350ZGMG C95350ZGMG inge protrusion inside the cabinet +C C P P P = plate height P = profile width = overlay = plate height P = profile width = overlay Profile boring scheme (10) 17.1 min 8.7 = plate height C = crank 3/9/17 = door thickness P min = mm P max = 22 mm V233/G CM01/ black CM01/C grey 50 errari

53 rm crank 9 = P 8 rm crank 17 = P 16 + P P = plate height P = profile width = overlay = plate height P = profile width = gap C95350BZGMG C95350CZGMG Minimum reveal required P Opening 95 Cup drilling distance P oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required or mounting plates see page 60 errari 51

54 inges lide-on hinges for metal profiles inclined arm lide-on - opening 95 P Inclined arm +45 Inclined arm +45 with overlay Opening djustment Interax 95 crew 95 = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height = oor thickness 36 Plate height P C95350EZGMG Plate height P C95350PZGMG lide-on hinges blind corner arm for metal profile lide-on - opening 95 P Blind corner min. = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height = oor thickness 95 Plate height P Opening djustment Interax 95 crew 36 C95350GZGMG 52 errari

55 Inclined arm +30 Inclined arm +30 with overlay Plate height P Plate height P C95350ZGMG C95350NZGMG Profile boring scheme Minimum reveal required P (10) P 17.1 min Opening 95 Cup drilling distance P oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required or mounting plates see page P min = mm P max = 22 mm V233/G CM01/ black CM01/C grey errari 53

56 inges lide-on hinges for wooden door lide-on - Ø40 mm opening 95 rm crank 0 = 22 + rm crank 3 = 19 + Ø 40 Ø cup hole Opening Interax djustment Wood screws knock-in dowels peed Wood screws knock-in dowels peed crew C95074MGMG C95076MGMG C95102MGMG C95074MGMG C95076MGMG C95102MGMG B Ø = plate height = cup drilling distance = overlay = plate height = cup drilling distance = overlay rilling distances and cup fixing Wood screw fixing Knock-in dowels fixing "peed" fast fixing B 7.5 V501/G 4x16 Ø 10 Ø 10 inge protrusion inside the cabinet +C+3.5 +C errari

57 rm crank 9 = 13 + rm crank 17 = 5 + rm crank 22 = + = plate height = cup drilling distance = overlay = plate height = cup drilling distance = overlay = plate height = cup drilling distance = gap Wood screws knock-in dowels peed Woodscrews knock-in dowels peed Wood screws knock-in dowels peed C95074BMGMG C95076BMGMG C95102BMGMG C95074CMGMG C95076CMGMG C95102CMGMG C95074MGZG C95076MGZG C95102MGZG Minimum reveal required Opening 95 Cup drilling distance oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required or mounting plates see page 60 errari 55

58 inges lide-on hinges for wooden door inclined arm lide-on - Ø40 mm opening 95 Inclined arm +45 Inclined arm +45 with overlay Ø Base height Base height Ø cup hole Opening Cup drilling distance djustment Wood screws Knock-i n dowels peed Wood screws Knock-i n dowels peed crew C95074EMGZG C95076EMGZG C95102EMGZG C95074PMGZG C95076PMGZG C95102PMGZG rilling distances and cup fixing B Ø 40 Wood screw fixing Knock-in dowels fixing "peed" fast fixing = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height B 7.5 V501/G 4x16 Ø 10 Ø errari

59 Inclined arm +30 Inclined arm +30 with overlay Base height Base height Wood screws Knock-i n dowels peed Wood screws Knock-i n dowels peed C95074MGZG C95076MGZG C95102MGZG C95074NMGZG C95076NMGZG C95102NMGZG Minimum reveal required Opening 95 Cup drilling distance oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required or mounting plates see page 60 errari 57

60 inges lide-on hinges blind corner arm for wooden doors lide-on - Ø40 mm opening 95 Blind corner arm min Ø 40 = rilling distance = Plate fixing distance = Overlay = Minimum reveal = Plate height 95 Base height Ø cup hole Opening Cup drilling distance djustment Wood screws Knock-i n dowels peed crew C95074GMGZG C95076GMGZG C95102GMGZG rilling distances and cup fixing B Ø 40 Wood screw fixing Knock-in dowels fixing "peed" fast fixing B 7.5 V501/G 4x16 Ø 10 Ø 10 Minimum reveal required Opening 95 Cup drilling distance oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required or mounting plates see page errari

61 lide-on hinges with one way spring for wooden doors lide-on - Ø35 mm opening erie 45 rm crank 0 = 17 + rm crank 9 = 8 + Ø = rilling distance = Plate height = Overlay Ø cup hole Opening Cup drilling distance djustment Wood screws Knock-in dowels Euroscrews peed Wood screws Knock-in dowels Euroscrews peed crew W45V22GG W4522GG W45P22GG W4522GG W45V22BGG W4522BGG W45P22BGG W4522BGG rilling distances and cup fixing 6 Ø 35 Wood screw fixing Knock-in dowels fixing Premounted "peed" fast fixing euroscrews fixing V501/G 4x16 Ø 10 Ø 5x10 Ø 10 Minimum reveal required Opening 100 Cup drilling distance oor thickness Minimum reveal = Gap Please note that the gap should always be at least equal to minimum reveal required or mounting plates see page 60 errari 59

62 inges Mounting plates or lide-on hinges Mounting plates fixing Wood screws Euroscrews Expanding dowels Pre-mounted 3 Pre-mounted 5 Pre-mounted Pre-mounted Bases V501/G 4x16 (*) Complete the code with: 3 = Ø 3.9 x 12.5 mm 4 = Ø 3.9 x 14.5 mm (**) Complete the code with: B2 = Ø 6.3 x 10 mm B1 = Ø 6.3 x 14 mm 1 = Ø 6.3 x 16 mm (***) Complete the code with: 3 = Ø 3.9 x 12.5 mm 4 = Ø 3.9 x 14.2 mm 37x B1241MG15E2 B1703MG15(*) B1043MG15(**) B1233MG15(***) B1063MG15(***) B1241MG30E2 B1703MG30(*) B1043MG30(**) B1233MG30(***) B1063MG30(***) 4.5 B1241MG45E2 B1703MG45(*) B1043MG45(**) B1233MG45(***) B1063MG45(***) 6.0 B1241MG60E2 B1703MG60(*) B1043MG60(**) B1233MG60(***) B1063MG60(***) 9 B1241ZG90E2 B1703ZG90(*) B1043ZG90(**) B1233ZG90(***) B1063ZG90(***) 10x B1121ZG30E2 B1123ZG30(**) x32 Vertical adjustment with cam COMPO Zamak 6.0 B2301ZG60E2 B2313ZG60(**) x32 Vertical adjustment with cam PIO teel B4503MG30(**) 4.5 B4503MG45(**) 6.0 B4503MG60(**) errari

63 Knock-in dowels Pre-mounted 10 ast fixing Pre-mounted 10 ifferent blocks can be combined with lide-on mounting plates 37x32 euroscrews fixing, to solve particular mounting problems. he inclined bloc, symmetrical, can be mounted at positive or negative angles with respect to the sides. P6B01 P6B02 P6B03 P6B04 P2401 chromed P2402 chromed P2403 chromed P2404 chromed crew V226/G crew V223/G crew V224/G crew V223/G B1051MG15M1 B1051MG30M1 B1051MG45M1 B1051MG60M1 B1051ZG90M1 BIZ B5011MG15E2 B5011MG30E2 B5011MG45E2 B5011MG60E2 B5011ZG90E2 Mounting plate with fast fixing system BIZ Blitz is the new fixing system that makes easier and faster the mounting by only half turn of the screwdriver. he screw is completely inserted in the dowel to avoid the accidental dismounting during transport.the 10mm diamater expandable dowels assures a perfect strenght with alla types of materials. Minimum encumbrance and mounting times drastically reduced. New adjustable plate With the patented cam system the door can be vertically and parallely adjusted ensuring a perfect door strenght in any position and preventing any door sag. COMPO plate Compasso is the first mounting plate that allows any door angle inclination with standard plate position. ngle inclination can be adjusted from 5 to 22 also with plate and door mounted. Compasso can be supplied with pre-set angle inclination according to customer s needs, quantities have to be agreed with errari sales managment. errari 61