Section 3 LIFT SYSTEMS

Transcription

1 Section 3 LIFT SYSTEMS

2 LIFT FITTINGS Contents Blum AVENTOS HF 3.0 Blum AVENTOS HL 3.0 Blum AVENTOS HS 3.06 Blum AVENTOS HK 3.08 Kesseböhmer Ewiva Lift 3.1 Kesseböhmer Stay Lift

3 Faber cooker LIFT FITTINGS hoods Blum AVENTOS Program AVENTOS is the ideal solution for any wall cabinet. Whether it is used in the kitchen or living area, whether there is lots of space available or only a little and whether it is used with small or large fronts, one thing never changes: the ease of motion. With SERVO-DRIVE the lift system opens at a single touch. Thanks to BLUMOTION, it closes again silently and effortlessly. AVENTOS lift system fittings offer the highest quality in addition to their proven stability and elegant design. AVENTOS HF is Blum s award-winning fitting system for bi-fold fronts and high and large fronts. The system provides endless possibilities in planning and design with little installation effort. AVENTOS HF offers direct access, ease of use and freedom of movement. AVENTOS HS is the ideal fitting for large fronts for wall cabinets that offer a multitude of design possibilities and enhanced user convenience. Like all other AVENTOS systems, the up & over system is easy to assemble and has an award-winning design. AVENTOS HL is the ideal lift up system for mid and high wall units and for niche cabinets with cabinets positioned above them. For easy access to cabinet interiors, international design juries have presented AVENTOS HL with several awards. The AVENTOS HK stay lift needs little space - even above fitted cabinets. AVENTOS HK-S is the right solution for small wall cabinets and for fitted units, e.g. above larder units or refrigerators. It fits snugly into small furniture and rounds off the AVENTOS program. 3.01

4 LIFT FITTINGS Blum AVENTOS Program: AVENTOS HF AVENTOS HF Bi-Fold Lift Soft closing and soft opening action Variable stop position Fast easy assembly using clip technology Adapted centre hinge for safety 3 way door adjustment and telescopic arm adjustment Simple and fast tension adjustment for optimum action Minimum cabinet depth 78mm No protruding parts for safe and easy transport Narrow telescopic arm for maximum storage within the cabinet New SERVO Drive for AVENTOS, the electrical motion support for wall cabinets Drilling Position * Drill depth 5 mm ** Alternative drilling Space Requirement Opening Angle Stop (see page 3.11) CH Angle Stop Y Cabinet height (CH) H (mm) mm CH x mm mm CH x mm CH Cabinet Without 10⁰ 83⁰ FH x mm FH x mm 0 mm Front Fixing Position Drill Position 10 Top hinge Centre Hinge Bumper Position SERVO-DRIVE CH X 1/ 1/ Drilling Distance 3-6 Gap Front Overlay DD 3-6 Gap 1.5 Side Overlay Cabinet height (CH) X (mm) mm 68 mm mm 5 mm Front Overlay Drilling Distance Based on 0 mm plate supplied Gap DD NOTE: To obtain the perfect motion AVENTOS HF works on Power Factor (PF). PF = Cabinet height x door weight including handle weight in kg. The tables opposite assume the optimum PF based on 0 mm MDF 3.0

5 AVENTOS HF Bi-fold Sets 1. Mechanism pieces. Cover Caps L+R 3. Lever Arms pieces. HF Hinge Kit Faber cooker LIFT FITTINGS hoods Blum AVENTOS Program 1 3 Blum AVENTOS HF Bi-Fold Lift Set 500 mm 600 mm 800 mm 900 mm 1000 mm 100 mm pieces 83 mm B0F850 B0F860 B0F880 B0F890 B0F810 B0F81 ( kg) pieces B0F3550 B0F3560 B0F3580 B0F3590 B0F3510 B0F351 pieces 50 mm B0F550 B0F560 B0F PF* B0F PF* B0F PF* B0F PF* Based on 0 mm MDF. PF* = Power Factor. Power factor guide see page 3.11 AVENTOS HF Bi-fold Sets 1. Mechanism pieces. Cover Caps L+R 3. Lever Arms pieces. HF Hinge Kit 5. SERVO-DRIVE Kit Blum AVENTOS HF SERVO-DRIVE Bi-Fold Lift Set 500 mm 600 mm 800 mm 900 mm 1000 mm 100 mm pieces 83 mm B1F850 B1F860 B1F880 B1F890 B1F810 B1F81 ( kg) pieces B1F3550 B1F3560 B1F3580 B1F3590 B1F3510 B1F351 pieces 50 mm B1F50 B1F560 B1F PF* B1F PF* B1F PF* B1F PF* Based on 0 mm MDF. PF* = Power Factor. Power factor guide see page

6 LIFT FITTINGS Blum AVENTOS Program: AVENTOS HL Blum AVENTOS HL Microwave Lift Integrated BLUMOTION soft close and opening Easy assembly and adjustment Provides excellent access to the cabinet interior Small program, huge application variety Stability, even with wide fronts Full 3 - way adjustment Minimum internal depth 76mm Adjustment for door weight with easy calibration can be stopped in any position No protruding parts for safety and easy transport Excellent durability New SERVO Drive for AVENTOS, the electrical motion support for wall cabinets Space Requirement Cornice Clearance Ø10** 5 * Drill depth 5 mm ** Alternative drilling SOB CH (mm) Min ICH (mm) Y (mm) SOB (mm) X Max (mm) Front Settings (based on lower gap 0 mm) SOB Oval Stabiliser Bar 1061 mm Top Panel Thickness Bumper Position SERVO-DRIVE CH Top Overlay Side Overlay X CH Cabinet ICH Internal Cabinet min 78 Front Fixing Position min 17 min ICH CH Ø 5* Ø10 15 H 88 SOB Y Drilling Position CH (mm) X CH (mm) a (mm) b (mm) Cut to Suit Standard: ICW* SERVO DRIVE: ICW* *Internal Carcase Width To obtain the perfect motion AVENTOS HL works based on establishing cabinet height and door weight including handle in kg. The tables opposite are based on the height and weight ranges for 0 mm MDF door 3.0

7 LIFT FITTINGS Faber cooker hoods Blum AVENTOS Program AVENTOS HL Sets 1 1. Mechanism pieces. Cover Caps L+R 3. Lever Arms L+R. Stabiliser Bar 5. Front brackets pieces 3 5 Blum AVENTOS HL Lift Up Set 00 mm 50 mm 500 mm B0L3550 ( kg) B0L050 B0L mm 800 mm B0L3560 ( kg) B0L060 B0L560 B0L3580 B0L080 B0L mm 1000 mm B0L3590 B0L090 B0L590 B0L3510 ( kg) B0L010 ( kg) B0L510 ( kg) 100 mm B0L351 ( kg) B0L01 ( kg) B0L51 ( kg) Based on 0 mm MDF. See page 3.11 for door weight guide AVENTOS HL SERVO-DRIVE Sets 1. Mechanism pieces. Cover Caps L+R 3. Lever Arms L+R. Stabiliser Bar 5. Front brackets pieces 6. SERVO-DRIVE set Blum AVENTOS HL Lift Up Set 00 mm 50 mm 500 mm B1L3550 ( kg) B1L050 B1L mm B1L3560 ( kg) B1L060 B1L mm B1L3580 B1L080 B1L mm B1L3590 B1L090 B1L mm B1L3510 ( kg) B1L010 ( kg) B1L510 ( kg) 100 mm B1L351 ( kg) B1L01 ( kg) B1L51 ( kg) Based on 0 mm MDF. See page 3.11 for door weight guide 3.05

8 LIFT FITTINGS Blum AVENTOS Program: AVENTOS HS Blum AVENTOS HS Up and Over lift Space Requirement Ø 0 min Ø 0 min 76 * Drill depth 5 mm ** Alternative drilling Side Overlay Front Settings (Dependant on tilt adjustment) Gap (mm) X Max (mm) Y Max (mm) Round Stabiliser Bar 1061 mm Bumper Position SERVO-DRIVE Top Overlay Front Fixing Position min Gap min 5 Top Panel Thickness Cornice Clearance 180 Drilling Position Integrated BLUMOTION soft close and opening Easy assembly Cabinet widths up to 1800mm Cabinet heights from 350mm - 800mm Standard CLIP technology for fronts Full 3 - way adjustment Minimum internal depth 76mm Adjustment for door weight with easy calibration can be stopped in any position No protruding parts for safety and easy transport Cut to Suit Standard: ICW*-19 SERVO DRIVE: ICW*-16 *Internal Carcase Width To obtain the perfect motion AVENTOS HS works based on establishing cabinet height and door weight including handle in kg. The tables opposite are based on the height and weight ranges for 0 mm MDF door 3.06

9 LIFT FITTINGS Faber cooker hoods Blum AVENTOS Program AVENTOS HS Sets 1 1. Mechanism pieces. Cover Caps L+R 3. Lever Arms L+R. Stabiliser Bar 5. Front brackets pieces 3 5 Blum AVENTOS HS Up and Over Lift Set 50 mm 570 mm 715 mm 500 mm 600 mm B0S3550 B0S3560 ( kg) ( kg) B0S550 B0S560 ( kg) ( kg) B0S5750 ( kg) B0S7150 ( kg) B0S5760 ( kg) B0S7160 ( kg) 800 mm 900 mm B0S mm B0S3590 ( kg) ( kg) B0S580 B0S590 ( kg) B0S5780 ( kg) B0S7180 ( kg) B0S3510 ( kg) B0S mm B0S351 ( kg) B0S51 ( kg) ( kg) ( kg) B0S5790 B0S5710 B0S571 ( kg) ( kg ) ( kg) B0S7190 ( kg) B0S7110 ( kg) B0S711 (1.00-1kg) Based on 0 mm MDF. See page 3.11 for door weight guide AVENTOS HS SERVO-DRIVE Sets 1. Mechanism pieces. Cover Caps L+R 3. Lever Arms L+R. Stabiliser Bar 5. Front brackets pieces 6. SERVO-DRIVE set Blum AVENTOS HS SERVO-DRIVE Up and Over Lift Set 50 mm 570 mm 715 mm 500 mm B1S mm B1S3560 ( kg) ( kg) B1S550 B1S560 ( kg) ( kg) B1S5750 ( kg) B1S7150 ( kg) B1S5760 ( kg) B1S7160 ( kg) 800 mm B1S3580 ( kg) B1S580 ( kg) B1S5780 ( kg) B1S7180 ( kg) 900 mm B1S3590 ( kg) B1S mm B1S3510 ( kg) B1S mm B1S351 ( kg) B1S51 ( kg) ( kg) ( kg) B1S5790 B1S5710 B1S571 ( kg) ( kg ) ( kg) B1S7190 ( kg) B1S7110 ( kg) B1S711 (1.00-1kg) Based on 0 mm MDF. See page 3.11 for door weight guide 3.07

10 LIFT FITTINGS Blum AVENTOS Program: AVENTOS HK Blum AVENTOS HK Stay Lift Drilling Position Soft Closing and soft opening action Variable stop position Fast easy assembly using clip technology Small Programme huge application variety Suitable for wall cabinets with cornice Excellent durability Simple and fast tension adjustment for optimum action Minimum cabinet depth 78 mm No protruding parts for safe and easy transport Narrow telescopic arm for maximum storage within the cabinet New SERVO Drive for AVENTOS, the electrical motion support for wall cabinets Space Requirement Cornice Clearance Top panel thickness min 61 D (mm) X (mm) Opening Angle Stop * Drill depth 5 mm ** Alternative drilling Bumper Position SERVO-DRIVE Required Space Without Y=FHx D 100 (see page 3.11) Y=FHx D 75 (see page 3.11) A=FHx D Minimum Gap (for opening) Top Overlay Gap Front Fixing Position Side Overlay mm NOTE: To obtain the perfect motion AVENTOS HK works on Power Factor (PF). PF = Cabinet height x door weight including double handle weight in kg. The tables opposite assume the optimum PF based on 0 mm MDF 3.08

11 AVENTOS HK Sets 1. Mechanism pieces. Cover Caps L+R 3. Front brackets pieces Faber cooker LIFT FITTINGS hoods Blum AVENTOS Program 1 3 Blum AVENTOS HK Lift Up Set 83 mm 500 mm 600 mm 800 mm 900 mm 1000 mm 100 mm B0K850 ( PF*) B0K860 B0K880 B0K890 B0K810 B0K81 B0K3550 B0K3560 B0K3580 B0K3590 B0K3510 B0K mm B0K050 B0K060 B0K080 B0K090 B0K010 B0K01 50 mm B0K550 B0K560 B0K580 B0K590 B0K510 B0K51 Based on 0 mm MDF. PF* = Power Factor. Power factor guide see page 3.11 AVENTOS HK SERVO-DRIVE Sets 1. Mechanism pieces. Cover Caps L+R 3. Front brackets pieces. SERVO-DRIVE set 1 3 Blum AVENTOS HK SERVO-DRIVE Lift Up Set 83 mm 500 mm 600 mm 800 mm 900 mm 1000 mm 100 mm B1K850 ( PF*) B1K860 B1K880 B1K890 B1K810 B1K81 B1K3550 B1K3560 B1K3580 B1K3590 B1K3510 B1K mm B1K050 B1K060 B1K080 B1K090 B1K010 B1K01 50 mm B1K550 B1K560 B1K580 B1K590 B1K510 B1K51 Based on 0 mm MDF. PF* = Power Factor. Power factor guide see page

12 LIFT FITTINGS Blum AVENTOS Program: AVENTOS HK-S AVENTOS HK-S Stay Lift for small - Mid s Specifically for small stay lifts Soft Closing and soft opening action Variable stop position Fast easy assembly using clip technology Small Programme huge application variety Suitable for wall cabinets with cornice Excellent durability Simple and fast tension adjustment for optimum action Minimum cabinet depth 0mm No protruding parts for safe and easy transport Drilling Position Top Panel Thickness Space Requirement Cornice Clearance Min internal height 150 D (mm) X (mm) Opening Angle Stop Required Space Without Y=FHx D 100 (see page 3.11) Y=FHx D 75 (see page 3.11) A=FHx D Front Fixing Position Side Fixing Position Minimum Gap Top Panel Thickness (for opening) G G Side Overlay mm Blum AVENTOS HK-S Art. No. Description Required B0KE00 HK-S Max Spring PF pieces B0KA01 HK-S Front Brkts Screw On* pieces B0KAE1 HK-S Front Brkts EXPANDO* pieces *Choose from Screw On or EXPANDO front brackets Blum AVENTOS HK-S Application mm - x x x x x x x 50 mm x x - - Based on MDF weight guide (see page 3.11) 3.10

13 Blum AVENTOS Program Weight and Power Factor Guide Faber cooker LIFT FITTINGS hoods Blum AVENTOS Program Weight / Power Factor Guide Weight in KG is based on 0 mm MDF s Power Factor1 Aventos HK (Page 3.08) = Cabinet height (mm) X Weight including double handle weight (kg) Power Factor Aventos HF (Page 3.0) = Cabinet height (mm) X combined Weight including handle weight (kg) 83 mm Weight KG Power Factor Required Power Factor Required mm Weight KG Power Factor Required Power Factor Required Weight KG Power Factor Required Power Factor Required Weight KG mm Power Factor Required Power Factor Required Weight KG mm Power Factor Required Power Factor Required n/a n/a n/a n/a n/a n/a Weight KG mm Power Factor Required n/a Power Factor Required n/a n/a n/a n/a n/a n/a Blum AVENTOS HF Bi-Fold Lift - Opening Angle Stop Art. No. Description B0F7051 Blum AVENTOS HF Bi-Fold Lift Opening Angle Stop 10 B0F7011 Blum AVENTOS HF Bi-Fold Lift Opening Angle Stop 83 Blum AVENTOS HK Stay Lift - Opening Angle Stop Art. No. Description B0K701 Blum AVENTOS HK Stay Lift Opening Angle Stop 100 B0F7011 Blum AVENTOS HK Stay Lift Opening Angle Stop

14 LIFT FITTINGS Kesseböhmer Lift Systems EWIVA Microwave Lift Easy assembly and adjustment Provides excellent access to the cabinet interior Ideal for concealing microwave Easily adjustable for a variety of door weights Soft silent action Integrated Soft Stopp dampening Snap on door connection Tool free adjustment of door front Suitable for 600 to 100 cabinet widths 1. Install the fitting.... Front is held in position Front simply clicks on... Front Position Internal Space for Fitting 05 mm 75 mm 33 mm 386 mm 38 mm 3 mm 7 mm 3.1

15 EWIVA Microwave Lift Faber cooker LIFT FITTINGS hoods Kesseböhmer Lift Systems Complete kit includes: Mechanism: pieces Cover Caps, Left & Right Front brackets: pieces Stabiliser cross bar Kessebohmer EWIVA Microwave Lift 600 mm 800 mm * mm * mm K1560 K1580 K1590 * = Cross stabiliser bar is cut-to-suit Fixing Positions 8mm 196mm 16mm 13mm 100mm 1 mm 53mm 85mm 117mm 3.13

16 LIFT FITTINGS Kesseböhmer Lift Systems DUO Stay Lift Flap support for small- to medium size doors Opening angle: 75, 90 and 110 For fitting left or right For use in conjunction with Blum hinges Shallow internal cabinet depth Adjustable tension Kesseböhmer Duo Stay Lift Art. Number Description K7156 Kesseböhmer Duo Stay Lift 3 19 X Side View 37 Y 3 Kesseböhmer Duo Stay Lift - Fitting Dimensions Front View Internal Depth Measurement 1 5 Opening Angle X Y ICD > 135 > 133 > 133 >ICD Opening Angle 75 Opening Angle 90 Opening Angle 110 Support Function Weight (kg) Cabinet (cm) Cabinet (cm) Cabinet (cm) Soft Close Weight (kg) Cabinet (cm) Cabinet (cm) Cabinet (cm) 3.1