AVENTOS lift systems Quality of motion

Transcription

1 VENTOS lift systems Quality of motion VENTOS fittings for lift systems provide ease of use in the wall cabinet area. Even wide lift systems open easily, remain in any desired position and thanks to BLUMOTION close silently and effortlessly. SERVO-DRIVE, the electrical motion support system, is also available for the VENTOS range, allowing electrical opening with a light touch, and closing at the push of a button.

2 STNDRD CBINET Electrical opening support system in conjunction with BLUMOTION for silent and effortless closing action With vertical bracket profile No fixed connection to the drive system Pull-outs can be used unchanged Tool-free assembly Simple cabling Shallow installation depth 1. Blum Distance Bumper Up to front height 300 mm use 2 pcs. Front height 300 mm and higher use 4 pcs. Use 4 pcs. for 65 kg-runner Diameter Blum No Code Ø 5 mm Bracket Profile Length Cable Blum No Code 670mm With Z10T mm With Z10T mm Without Z10T Rear cross rail construction, horizontal 3a. Profile ttachment Top/Bottom Nylon Light Grey RL 7037 Z10D01E Rear cross rail construction, vertical, alternative to 3a 3b. Profile ttachment Bottom & Back Includes Back bracket cover cap Nylon Light Grey RL 7037 Z10D01E Connecting Node & Cable End Protector Includes: 1 x Connection node 2 x Cable end protectors Nylon Black/Orange Z10V100E SERVO-DRIVE Transformer Description Blum No Code 72W/240V Z10NE Cable & Plug Description Blum No Code ustralian Plug Z10M200K a. Transformer Base Housing Nylon Z10NG Drawers, Hinges & ssembly Devices 9. Drive Unit Nylon Light Grey RL 7037 Z b. Transformer Panel Housing - alternative to 15a Nylon Z10NG Trigger guidance for chipboard back For cabinet width KB mm Nylon Light Grey RL 7037 Z103H Distribution Cable & Cable End Protector For cutting to length Can be used as a distribution, bracket profile and communications cable Includes: 1 x Distribution cable 2 x Cable end protectors Length Blum No Code 8m Z10K800E ccessories 18. Syncronisation Cables Length Blum No Code 1600mm Z10K160S mm Z10K120S mm Z10K008S Cable Holder For securing the distribution cable Nylon Z10K LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.101.2

3 (BOTTOM & BCK) Planning - horizontal cross member Cabinet dimensions KB LW LT Cabinet width Inner cabinet width Internal cabinet depth Drawers, Hinges & ssembly Devices Drilling distance base/cross bar Cabinet width KB mm NL Nominal length X Drilling position Y Min. space requirement Cabinet width KB starting at 420mm Cabinet width KB mm Steel back height N Drilling position and space requirement for all applications Back X (mm) Y(mm) Steel back NL + 2 Min. LT = NL +16 Chipboard back NL + 19 Min. LT = NL +33 Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling. Drilling position and min. space requirement Back X (mm) Y(mm) Steel back NL - 1 Min. LT = NL +13 Chipboard back NL + 16 Min. LT = NL +30 SERVO-DRIVE can also be used if there is less space available. t the assembly position for the bracket profile, inner pull-out elements can only be opened by pulling (not by pushing)..102 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification

4 Planning - horizontal cross member Lower cabling Back cabling Front assembly - position of Blum distance bumper Drawer with overlay front lternative drilling pattern for PRO-CENTER and MINIPRESS Page Instructions Bracket profile cutting dimensions Position - drive unit The Blum distance bumper creates and maintains the required trigger path of 2 mm. When using an 65 kg runner, always attach 4 Blum distance bumpers. For optimal trigger function for front height FH > 300 mm, use front stabilisation F Front overlay FH Front height Drawers, Hinges & ssembly Devices LH PL Internal cabinet height Bracket profile length ll back heights except height N LH Internal cabinet height PL Bracket profile length KB Cabinet width Back height N Cabinet width KB Back height N Steel back Chipboard back < 320 mm X (mm) Y (mm) > 320 mm X (mm) Y (mm) LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.103.2

5 (TOP & BOTTOM) Planning - vertical cross member Cabinet dimensions KB LW LT Cabinet width Inner cabinet width Internal cabinet depth Drawers, Hinges & ssembly Devices Drilling distance base/cross bar Cabinet width KB mm NL Nominal length X Drilling position Y Min. space requirement Cabinet width KB starting at 420mm Cabinet width KB mm Steel back height N Drilling position and space requirement for all applications Back X (mm) Y(mm) Steel back NL + 2 LT = NL +17 Chipboard back NL + 19 LT = NL +34 Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling. Drilling position and min. space requirement Back X (mm) Y(mm) Steel back NL - 1 LT = NL +14 Chipboard back NL + 16 LT = NL +31 SERVO-DRIVE can also be used if there is less space available. t the assembly position for the bracket profile, inner pull-out elements can only be opened by pulling (not by pushing)..104 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification

6 Planning - horizontal cross member Lower cabling Back cabling Front assembly - position of Blum distance bumper Drawer with overlay front lternative drilling pattern for PRO-CENTER and MINIPRESS Page Instructions Bracket profile cutting dimensions Position - drive unit The Blum distance bumper creates and maintains the required trigger path of 2 mm. When using an 65 kg runner, always attach 4 Blum distance bumpers. For optimal trigger function for front height FH > 300 mm, use front stabilisation F Front overlay FH Front height Drawers, Hinges & ssembly Devices LH PL Internal cabinet height Bracket profile length ll back heights except height N LH Internal cabinet height PL Bracket profile length KB Cabinet width Back height N Cabinet width KB Back height N Steel back Chipboard back < 320 mm X (mm) Y (mm) > 320 mm X (mm) Y (mm) LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.105.2

7 Modern & multi-functional hidden storage Create pockets of hidden storage to maintain a clean and uncluttered look in your kitchen, or customise your bench height with LINK electric lift systems. LINK can be used to provide hidden storage that pops up from the benchtop at the touch of a switch perfect for obtaining that clutter free look in an instant. The LINK system also allows you to raise or lower the height of your benches for an ergonomic space no matter what you are doing whether chopping vegetables, using appliances or working on the computer, you can adjust the height of the bench for maximum comfort.

8 SPCE TOWER Electrical opening support system in conjunction with BLUMOTION for silent and effortless closing action With vertical bracket profile No fixed connection to the drive system Pull-outs can be used unchanged Tool-free assembly Simple cabling Shallow installation depth 2. Bracket Profile Length Cable Blum No Code 670mm With Z10T mm With Z10T mm Without Z10T Rear cross rail construction, horizontal 3a. Profile ttachment Top/Bottom Nylon Light Grey RL 7037 Z10D01E Rear cross rail construction, vertical, alternative to 3a 3b. Profile ttachment Bottom & Back Includes Back bracket cover cap Nylon Light Grey RL 7037 Z10D01E Connecting Node & Cable End Protector Includes: 1 x Connection node 2 x Cable end protectors Nylon Black/Orange Z10V100E SERVO-DRIVE Transformer Description Blum No Code 72W/240V Z10NE Cable & Plug Description Blum No Code ustralian Plug Z10M200K a. Transformer Base Housing Nylon Z10NG Drawers, Hinges & ssembly Devices 9. Drive Unit Nylon Light Grey RL 7037 Z Distribution Cable & Cable End Protector For cutting to length Can be used as a distribution, bracket profile and communications cable Includes: 1 x Distribution cable 2 x Cable end protectors Length Blum No Code 8m Z10K800E b. Transformer Panel Housing - alternative to 15a Nylon Z10NG ccessories 19. Cable Holder For securing the distribution cable Nylon Z10K LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.107.2

9 Planning - bracket profile top Cabinet dimensions Planning - bracket profile bottom Cabinet dimensions Drawers, Hinges & ssembly Devices Drilling distance base/cross bar KB LW LT Cabinet width Inner cabinet width Internal cabinet depth Drilling distance base/cross bar KB LW LT Cabinet width Inner cabinet width Internal cabinet depth Cabinet width KB mm NL Nominal length X Drilling position Y Min. space requirement Cabinet width KB starting at 420mm Cabinet width KB mm NL Nominal length X Drilling position Y Min. space requirement Cabinet width KB starting at 420mm Drilling position and space requirement for all applications Back X (mm) Y(mm) Steel back NL + 2 LT = NL +17 Chipboard back NL + 19 LT = NL +34 Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling. Drilling position and min. space requirement Back X (mm) Y(mm) Steel back NL - 1 LT = NL +14 Chipboard back NL + 16 LT = NL +31 SERVO-DRIVE can also be used if there is less space available. t the assembly position for the bracket profile, inner pull-out elements can only be opened by pulling (not by pushing). Drilling position and space requirement for all applications Back X (mm) Y(mm) Steel back NL + 2 LT = NL +16 Chipboard back NL + 19 LT = NL +33 Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling. Drilling position and min. space requirement Back X (mm) Y(mm) Steel back NL - 1 LT = NL +13 Chipboard back NL + 16 LT = NL +30 SERVO-DRIVE can also be used if there is less space available. t the assembly position for the bracket profile, inner pull-out elements can only be opened by pulling (not by pushing)..108 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification

10 Planning - drilling pattern base Lower cabling Back cabling Position - drive unit lternative drilling pattern for PRO-CENTER and MINIPRESS Page Instructions Bracket profile cutting dimensions Drawers, Hinges & ssembly Devices KB LW LT Cabinet width Inner cabinet width Internal cabinet depth ll back heights except height N LH Internal cabinet height PL Bracket profile length KB Cabinet width LH PL Internal cabinet height Bracket profile length LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.109.2

11 UNO FOR BOTTOM MOUNT WSTE BIN SOLUTIONS Electrical opening support system in conjunction with BLUMOTION for silent and effortless closing action For bottom mount waste bin solutions No fixed connection to the drive system Pull-outs can be used unchanged Quick assembly of pre-mounted parts lso ideal for retrofitting Drawers, Hinges & ssembly Devices Planning Drilling distances base 16. SERVO-DRIVE set Description Blum No Code Uno set for bottom mount Z10N20KD Position - Blum distance bumper Includes: Item No 2 x Distance bumper 1 1 x ttachment bracket - 1 tier 4 1 x Drive unit 9 1 x Transport protection 16a 1 x Protection against dripping water 16b Blum transformer incl. cable 16c 1 x ssembly Device 16d 7 x Screws for Blum distance bumper and attachment bracket 1 x Installation instructions 1 x Instruction leaflet Position - cabinet profile LW NL X Y Inner cabinet width Nominal length Drilling position Chipboard back: NL - 42 mm Min. space requirement Chipboard back: NL + 35 mm The Blum distance bumper creates and maintains the required trigger path of 2 mm.110 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification

12 UNO FOR TOP MOUNT WSTE BIN SOLUTIONS Electrical opening support system in conjunction with BLUMOTION for silent and effortless closing action For bottom mount waste bin solutions No fixed connection to the drive system Pull-outs can be used unchanged Quick assembly of pre-mounted parts lso ideal for retrofitting * European image shown. * European side brackets shown. Blum No Z10T393WK Z10T543WK Code Includes: Item No 2 x Distance bumper 1 1 x Bracket profile - hortzontal 6 1 x Drive unit 9 1 x Protection against dripping water 16b 1 x Blum transformer incl. cable 16c 1 x Bracket profile adapter left/right 16e 6 x Screws for Blum distance bumper and attachment bracket 1 x Installation instructions 1 x Instruction leaflet Planning Position - Blum distance bumper Drawers, Hinges & ssembly Devices 16. SERVO-DRIVE set Uno set for top mount 450mm 600mm The Blum distance bumper creates and maintains the required trigger path of 2 mm LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.111.2

13 560 Waste Program designer waste management Made from a combination of metal and plastic for added strength and durability, the 560 Waste Program features a stylish matt grey finish, individual bucket lids and the option of a metal cabinet lid to help mask and minimise odours. The 560 Waste Program comes in a variety of different sizes and bucket heights to suit a range of cabinet widths and has been designed to suit Blum s TNDEMBOX intivo and TNDEMBOX antaro range. To completely automate your waste system, install Blum s SERVO-DRIVE for hands free opening and closing.

14 SINK CBINET Electrical opening support system in conjunction with BLUMOTION for silent and effortless closing action With attachment bracket/s No fixed connection to the drive system Pull-outs can be used unchanged Tool-free assembly Simple cabling Shallow installation depth 1. Blum Distance Bumper Up to front height 300 mm use 2 pcs. Front height 300 mm and higher use 4 pcs. Use 4 pcs. for 65 kg-runner Diameter Blum No Code Ø 5 mm ttachment bracket 2 tier Nylon Z10D ttachment bracket 1 tier Nylon Z10D Drive Unit Nylon Light Grey RL 7037 Z Connecting Node & Cable End Protector Includes: 1 x Connection node 2 x Cable end protectors Nylon Black/Orange Z10V100E SERVO-DRIVE Transformer Description Blum No Code 72W/240V Z10NE Cable & Plug Description Blum No Code ustralian Plug Z10M200K a. Transformer Base Housing Nylon Z10NG Drawers, Hinges & ssembly Devices 9a. Dripping water protection cover Nylon RL 7037 Z10D Distribution Cable & Cable End Protector For cutting to length Can be used as a distribution, bracket profile and communications cable Includes: 1 x Distribution cable 2 x Cable end protectors Length Blum No Code 8m Z10K800E b. Transformer Panel Housing - alternative to 15a Nylon Z10NG Cable Holder For securing the distribution cable Nylon Z10K LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.113.2

15 Planning Cabinet dimensions KB LW LT Cabinet width Inner cabinet width Internal cabinet depth Drawers, Hinges & ssembly Devices Drilling distance base/cross bar Cabinet width KB starting at 900 mm NL Nominal length X Drilling position Y Min. space requirement Chipboard back Measured from cabinet front edge Drilling position and space requirement for all applications Back X (mm) Y(mm) Steel back NL + 2 Min. LT = NL +16 Chipboard back NL + 19 Min. LT = NL +33 Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling. Drilling position and min. space requirement Back X (mm) Y(mm) Steel back NL - 1 Min. LT = NL +13 Chipboard back NL + 16 Min. LT = NL +30 SERVO-DRIVE can also be used if there is less space available. t the assembly position for the top attachment bracket, inner pull-out elements can only be opened by pulling (not by pushing)..114 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification

16 (SINK DRWER) Planning - horizontal cross member Lower cabling Front assembly - position of Blum distance bumper Drawer with overlay front lternative drilling pattern for PRO-CENTER and MINIPRESS Cross member - attachment bracket 1 tier Position Drilling pattern - top plan view min 81 Drilling position in cabinet The Blum distance bumper creates and maintains the required trigger path of 2 mm. When using an 65 kg runner, always attach 4 Blum distance bumpers. For optimal trigger function for front height FH > 300 mm, use front stabilisation F Front overlay FH Front height Drawers, Hinges & ssembly Devices Cabinet width KB starting at 900mm Steel back X = mm Chipboard back X = mm Drilling depth 8 mm Chipboard back height N Measured from cabinet front edge LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.115.2

17 STNDRD CBINET - BRCKET PROFILE HORIZONTL Electrical opening support system in conjunction with BLUMOTION for silent and effortless closing action With attachment bracket and horizontal profile No fixed connection to the drive system Pull-outs can be used unchanged Tool-free assembly Simple cabling Shallow installation depth Drawers, Hinges & ssembly Devices 1. Blum Distance Bumper Up to front height 300 mm use 2 pcs. Front height 300 mm and higher use 4 pcs. Use 4 pcs. for 65 kg-runner Diameter Blum No Code Ø 5 mm Bracket Profile For cabinet width KB mm Material Length Blum No Code luminium 1143mm Z10T1143B Bracket profile attachment left/right Nylon Light Grey RL 7037 Z10D Drive Unit Nylon Light Grey RL 7037 Z Connecting Node & Cable End Protector Includes: 1 x Connection node 2 x Cable end protectors Nylon Black/Orange Z10V100E SERVO-DRIVE Transformer Description Blum No Code 72W/240V Z10NE Cable & Plug Description Blum No Code ustralian Plug Z10M200K a. Transformer Base Housing Nylon Z10NG Trigger guidance for chipboard back For cabinet width KB mm Nylon Light Grey RL 7037 Z103H b. Transformer Panel Housing - alternative to 15a Nylon Z10NG Distribution Cable & Cable End Protector For cutting to length Can be used as a distribution, bracket profile and communications cable Includes: 1 x Distribution cable 2 x Cable end protectors Length Blum No Code 8m Z10K800E ccessories 19. Cable Holder For securing the distribution cable Nylon Z10K DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification

18 Planning Cabinet dimensions Front assembly - position of Blum distance bumper KB LW LT Cabinet width Inner cabinet width Internal cabinet depth Space requirement in cabinet Chipboard screws and system screws can be used * 55.5 mm for back height N ** 23.5 mm for back height N Position - drive unit LW NL X Y Inner cabinet width Nominal length Drilling position Min. space requirement The Blum distance bumper creates and maintains the required trigger path of 2 mm. When using an 65 kg runner, always attach 4 Blum distance bumpers. For optimal trigger function for front height FH > 300 mm, use front stabilisation F Front overlay FH Front height Drawers, Hinges & ssembly Devices Cabinet width KB mm Cabinet width KB mm Cabinet width KB mm Steel Back height N Drilling position and space requirement for all applications Back X (mm) Y(mm) Steel back NL - 26 Min. LT = NL + 20 Chipboard back NL - 9 Min. LT = NL + 37 Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling. Drilling position and min. space requirement Back X (mm) Y(mm) Steel back NL - 29 Min. LT = NL +17 Chipboard back NL - 12 Min. LT = NL +34 SERVO-DRIVE can also be used if there is less space available. t the assembly position for the top attachment bracket, inner pull-out elements can only be opened by pulling (not by pushing). LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.117.2

19 STNDRD CBINET - UPPER TTCHMENT BRCKET Electrical opening support system in conjunction with BLUMOTION for silent and effortless closing action With upper attachment bracket No fixed connection to the drive system Pull-outs can be used unchanged Tool-free assembly Simple cabling Shallow installation depth Drawers, Hinges & ssembly Devices 1. Blum Distance Bumper Up to front height 300 mm use 2 pcs. Front height 300 mm and higher use 4 pcs. Use 4 pcs. for 65 kg-runner Diameter Blum No Code Ø 5 mm Upper attachment bracket with pre mounted adaptor for the drive unit Steel RL 7037 / zinc plated Z10D Drive Unit Nylon Light Grey RL 7037 Z Connecting Node & Cable End Protector Includes: 1 x Connection node 2 x Cable end protectors Nylon Black/Orange Z10V100E SERVO-DRIVE Transformer Description Blum No Code 72W/240V Z10NE Cable & Plug Description Blum No Code ustralian Plug Z10M200K Trigger guidance for chipboard back For cabinet width KB mm Nylon Light Grey RL 7037 Z103H a. Transformer Base Housing Nylon Z10NG b. Transformer Panel Housing - alternative to 15a Nylon Z10NG Distribution Cable & Cable End Protector For cutting to length Can be used as a distribution, bracket profile and communications cable Includes: 1 x Distribution cable 2 x Cable end protectors Length Blum No Code 8m Z10K800E ccessories 19. Cable Holder For securing the distribution cable Nylon Z10K DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification

20 Planning Cabinet dimensions Front assembly - position of Blum distance bumper Position - drive unit ll back heights except height N KB Cabinet width Drilling distance base/cross bar KB LW LT Back height N Cabinet width Inner cabinet width Internal cabinet depth Upper attachment bracket drilling position The cross bar must be connected to the work plate to make it secure Cabinet width KB Starting at 320 Back height X (mm) Y(mm) Steel back Chipboard back The Blum distance bumper creates and maintains the required trigger path of 2 mm. When using an 65 kg runner, always attach 4 Blum distance bumpers. For optimal trigger function for front height FH > 300 mm, use front stabilisation F Front overlay FH Front height Drawers, Hinges & ssembly Devices Cabinet width KB mm NL Nominal length X Drilling position Y Min. space requirement Cabinet width KB starting at 420mm Drilling position and space requirement for all applications Back X (mm) Y(mm) Steel back NL - 18 Min. LT = NL Chipboard back NL - 1 Min. LT = NL Using this assembly position for the bracket profile, both inner pull-out elements as well as those with overlay fronts can be opened by pushing and pulling. Drilling position and min. space requirement Back X (mm) Y(mm) Steel back NL - 21 Min. LT = NL Chipboard back NL + 4 Min. LT = NL SERVO-DRIVE can also be used if there is less space available. t the assembly position for the top attachment bracket, inner pull-out elements can only be opened by pulling (not by pushing). LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.119.2

21 COMBOX SET WITH SSEMBLY CCESSORIES For preventing front collisions when using SERVO-DRIVE in corner situations Drawers, Hinges & ssembly Devices pplication SYNCHRONISTION CBLE suitable ONLY with drive unit Z ( ) Connects two drive units that need to activate simultaneously Description Blum No Code COMBOX for SERVO-DRIVE Z10ZC Length Blum No Code 80mm Z10K008S mm Z10K120S mm Z10K160S DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification

22 SSEMBLY, REMOVL, ND DJUSTMENT Blum distance bumper Bracket profile cable Insert Blum distance bumper (do not glue) Equip bracket profile 1 Bracket profile cable 2 Communication cable Drive unit - bracket profile ssembly Bracket profile - top and bottom Bracket profile - bottom and back Drawers, Hinges & ssembly Devices ssembly ssembly Bracket profile cable - SPCE TOWER ttachment bracket 1 tier ttachment bracket 2 tier Remove pre-mounted bracket profile cable from both bracket profiles and insert a new, long bracket profile cable in the upper bracket profile 2nd drive unit can also be installed (optional). Please observe min. inner cabinet width! LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.121.2

23 SSEMBLY, REMOVL, ND DJUSTMENT Drive unit - attachment bracket ssembly Drawers, Hinges & ssembly Devices Bracket profile cable Equip bracket profile adapter Bracket profile adapeter Drive unit - bracket profile adapter ssembly Bracket profile ssembly Chipboard screws and system screws can be used Upper attachment bracket Drive unit - upper attachment bracket ssembly ssembly.122 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification

24 SSEMBLY, REMOVL, ND DJUSTMENT Blum transformer 72 W Base fixing Panel fixing Space requirement and safety distance Base fixing Base fixing Panel fixing ttention Maintain a 30 mm safety distance from the bottom edge (base fixing) and/or front edge (panel fixing) and side edges of the transformer unit housing to the neighbouring elements ir must be able to circulate, otherwise the Blum transformer could overheat Drawers, Hinges & ssembly Devices Pull-out stop Panel fixing Pull-out stop LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.123.2

25 SSEMBLY, REMOVL, ND DJUSTMENT Standard cabinet - lower cabling Standard cabinet - back cabling Base fixing Only one Blum transformer can be connected to each distribution cable. Panel fixing Base fixing Panel fixing Drawers, Hinges & ssembly Devices SPCE TOWER Bracket profile horizontal Base fixing Panel fixing Upper attachment bracket Lower cabling Lower cabling Connecting node ssembly Do not damage piercing tips.124 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification

26 SSEMBLY, REMOVL, ND DJUSTMENT Drive unit Selector switch Mode (1) Single: Only one drive unit moves (standard setting) Multiple: When set to Multiple, drive units move simultaneously Note Not applicable for SERVO-DRIVE uno Selector switch Power (2) Full: Standard setting Half: for short nominal lengths ( mm) pull-out only moves a short distance Operating mode display (LED) (3) Selector switch Lever extension Removal Trigger guidance ssembly The drive unit comes with the lever extension. The lever extension must be removed for cabinet widths mm in combination with a steel back The lever guide must be attached and secured with screws for cabinet widths mm in combination with a chipboard back The lever extension must also be removed for a cabinet width of 300 mm in combination with a chipboard back Drawers, Hinges & ssembly Devices LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.125.2

27 SSEMBLY, REMOVL, ND DJUSTMENT Bracket profile Removal Drawers, Hinges & ssembly Devices ttachment bracket Removal Bracket profile horizontal Removal Upper attachment bracket Removal.126 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification

28 SSEMBLY, REMOVL, ND DJUSTMENT Bracket profile Horizontal cross member Vertical cross member Bracket profile horizontal Removal Blum transformer 72 W Drawers, Hinges & ssembly Devices Base fixing Panel fixing LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.127.2