TANDEMBOX antaro. Rectangular rail with a clear design throughout the whole range.

Size: px

Start display at page:

Download "TANDEMBOX antaro. Rectangular rail with a clear design throughout the whole range."

Cordelia Russell
5 years ago
Views:

1 TANDEMBOX antaro Rectangular rail with a clear design throughout the whole range

2 2

Minimalist design. Proven technology. TANDEMBOX antaro The TANDEMBOX drawer system has been impressing furniture users and furniture manufacturers with its proven technology for many years now.

3 Minimalist design. Proven technology. TANDEMBOX antaro The TANDEMBOX drawer system has been impressing furniture users and furniture manufacturers with its proven technology for many years now. We have now developed TANDEMBOX antaro, a new programme line with new design options. TANDEMBOX antaro has a clear style whether it s open with a gallery or as a closed drawer with a side design element. All components are colour-coordinated. Minimalist design meets proven technology. That is TANDEMBOX antaro. 4 7 Design 8 15 Programme Assembly Ideas for practical kitchens Motion technologies TANDEMBOX programme lines Ordering and planning information Blum 3

4 4

5 Open, or with a design element. Consistent design TANDEMBOX antaro starts with your choice of an open drawer, characterised by a rectangular gallery or a closed drawer with a side design element made from glass, metal or other material such as wood. 5

6 6

The design Four colours. One style Minimalist style with a customised colour concept The minimalist design of TANDEMBOX antaro has a consistently clear form and colouring.

7 The design Four colours. One style Minimalist style with a customised colour concept The minimalist design of TANDEMBOX antaro has a consistently clear form and colouring. All nylon components are coordinated to the respective drawer side colour. The colour and material programme includes three steel variants: Silk white, white aluminium and terra black as well as stainless steel. Silk white Stainless steel White aluminium (RAL 9006) Terra black 7

The programme One system for all applications You have the choice. And all options are available With TANDEMBOX antaro, you can realise all of your design aspirations.

8 The programme One system for all applications You have the choice. And all options are available With TANDEMBOX antaro, you can realise all of your design aspirations. From inner drawers, high fronted pull-outs to open or closed drawers. Even special applications such as the SPACE TOWER larder unit, the Blum sink pull-out or the SPACE CORNER corner solution are possible. 8

9 9

10 10 The programme Living room re-invented

TANDEMBOX antaro offers a complete programme

11 TANDEMBOX antaro offers a complete programme for pull-outs and drawers. Whether in the kitchen, bathroom or living area all applications are possible with TANDEMBOX antaro. Nominal lengths mm Cabinet widths Drawer side heights mm N M K (68.5 mm) (83.6 mm) (115.6 mm) 11

12 12

Design elements Use to attain a unique style By using

drawer & simultaneously present a style statement.

You can choose from Blum design elements (glass or metal).

design elements in three drawer side colours Silk white

13 Design elements Use to attain a unique style By using design elements you will be able to fully enclose the drawer & simultaneously present a style statement. The elements you add can reflect your design aspirations. You can choose from Blum design elements (glass or metal). There are of course, many other possibilities (eg wood) you could use to express your ideas. Glass design elements Clear glass Frosted glass Metal design elements in three drawer side colours Silk white Terra black White aluminium (RAL 9006) Your own ideas, e.g. using wood can easily be put into practice 13

14 14 The programme Inner dividing system

Practical organisation The ORGA-LINE inner dividing system is not only

Storage items are perfectly organised using flexible longside and cross

Stainless steel drip trays in the drawers provide high-quality organisation.

15 Practical organisation The ORGA-LINE inner dividing system is not only practical, but also matches the shape and colour scheme of TANDEMBOX antaro. Storage items are perfectly organised using flexible longside and cross dividers. Stainless steel drip trays in the drawers provide high-quality organisation. Very practical: The containers are easy to remove and are dishwasher safe. See the ORGA-LINE brochure for more information about this practical organisational tool. 15

16 Gallery and front are connected via INSERTA technology Assembly Simple and tool-free 16

using the proven INSERTA technology completely tool-free.

This is a real advantage especially when you are assembling different programme lines.

17 Back gallery rails clip on easily. It is important to us that assembly is as quick and easy as possible, e.g. using the proven INSERTA technology completely tool-free. The TANDEMBOX program line is based on the established cabinet profile. This is a real advantage especially when you are assembling different programme lines. The drilling and cutting dimensions remain the same and familiar assembly devices support efficient assembly. Front tilt adjustment Design element assembly is very easy. Simply slide in and connect to the back locking piece. View assembly video 17

18 18 DYNAMIC SPACE Ideas from Blum for practical kitchens

The three important features of a practical kitchen include good workflows, enough storage space and high ease of use at Blum, this means: workflow, space and motion.

Workflow - Give yourself easy access Thanks to full extension drawers & pull-outs, even those items in the farthest corner are visible and easy to reach.

Space - Optimal cabinet utilisation with TANDEMBOX antaro TANDEMBOX antaro can also be used as a an enclosed drawer with glass or metal design elements.

19 The three important features of a practical kitchen include good workflows, enough storage space and high ease of use at Blum, this means: workflow, space and motion. With DYNAMIC SPACE, we offer helpful ideas, suggestions and solutions for making today's kitchen even more practical. Workflow - Give yourself easy access Thanks to full extension drawers & pull-outs, even those items in the farthest corner are visible and easy to reach. The right ORGA-LINE inner dividing system provides additional organisation and overview. In this way, TANDEMBOX antaro supports simple workflows in the kitchen. Space - Optimal cabinet utilisation with TANDEMBOX antaro TANDEMBOX antaro can also be used as a an enclosed drawer with glass or metal design elements. Products are easier to stack, thus creating up to 55% more storage space. You can also achieve special solutions such as the Blum sink pull-out with TANDEMBOX antaro, gaining additional storage space from previously unused areas. Motion - Enhanced user convenience and quality of motion The BLUMOTION function is integrated into TANDEMBOX cabinet profiles. Thus pull-outs always close silently and effortlessly regardless of how much force is used for closing. TANDEMBOX antaro can also be equipped with the SERVO-DRIVE electrical opening support system. A light touch on the front is enough and pull-outs open as if by themselves. 19

20 20 The TANDEMBOX cabinet profile Three lines. One solution

21 All TANDEMBOX programme lines are based on the tried and tested TANDEMBOX cabinet profile. Its smooth running action has been impressing users for many years now. The lowfriction cylindrical nylon roller runners ensure high quality of motion for load bearing classes of 30, 50 or 65 kg. A furniture lifetime. Numerous motion and load bearing tests ensure this quality standard. 21

22 22 Fascinating action when opening and closing

TANDEMBOX antaro can be used with all Blum motion technologies: BLUMOTION With BLUMOTION, pull-outs close silently and effortlessly.

SERVO-DRIVE A light touch on a handle-less front or a light pull of the handle that's all it takes to open drawers and pull-outs with the

TIP-ON Our mechanical opening support system TIP-ON offers practical opening comfort: Handle-less pull-outs, doors and lift systems will open at

23 TANDEMBOX antaro can be used with all Blum motion technologies: BLUMOTION With BLUMOTION, pull-outs close silently and effortlessly. It doesn't matter how much force is used to close drawers and pull-outs or how heavily laden they are. SERVO-DRIVE A light touch on a handle-less front or a light pull of the handle that's all it takes to open drawers and pull-outs with the SERVO-DRIVE electrical motion support system: And you always have integrated BLUMOTION. TIP-ON Our mechanical opening support system TIP-ON offers practical opening comfort: Handle-less pull-outs, doors and lift systems will open at a single touch. The pull-out closes with a light press. Top-quality motion throughout the kitchen Along with pull-outs, lift systems can also be equipped with this comfort of motion. For lift systems: BLUMOTION, SERVO-DRIVE, TIP-ON For doors: BLUMOTION, TIP-ON 23

TANDEMBOX One programme. Three lines. One proven system. Various interpretations With the TANDEMBOX program, you can fulfil various customer requirements with just one box system.

24 TANDEMBOX One programme. Three lines. One proven system. Various interpretations With the TANDEMBOX program, you can fulfil various customer requirements with just one box system. This is because the TANDEMBOX intivo, TANDEMBOX antaro and TANDEMBOX plus lines have many different design options. The proven TANDEMBOX cabinet profile ensures smooth running action for all three programme lines. 24

25 25

26 TANDEMBOX antaro Overview applications Standard cabinet High fronted pull-out Inner pull-out High fronted pull-out gallery D Inner pull-out gallery D M drawer side 26 High fronted pull-out gallery D K drawer side 26 High fronted pull-out gallery C M drawer side 26 Design element D M drawer side 26 Design element C M drawer side 26 High fronted pull-out with an alu frame gallery D M drawer side 26 High fronted pull-out with an alu frame gallery C M drawer side 26 Corner cabinet SPACE CORNER with SYNCROMOTION gallery D/C M drawer side 26 SPACE CORNER with rigid fronts gallery D M drawer side 26 Sink cabinet Sink pull-out gallery D M drawer side 26 Sink pull-out gallery C M drawer side 196 M drawer side Inner pull-out gallery D K drawer side Inner pull-out gallery C M drawer side Design element D M drawer side Design element C M drawer side

27 Overview applications TANDEMBOX antaro Standard cabinet Drawer Inner drawer Drawer K Inner drawer K 27 Drawer M 27 Drawer N 27 Corner cabinet SPACE CORNER mit with SYNCROMOTION M M 27 SPACE CORNER with mit starren rigid fronts Fronten M M 27 Inner drawer M Accessories TANDEMBOX-Korpusschiene cabinet profile Stahlrückwand back Back Rückwand- gallery und Relinghalter fixing B M B drawer M-Zarge side Flexibler Relinghalter Information Silk white Terra black white aluminium Stainless steel White grey Copper/Black Abbreviations Abbreviations SW Dust grey RAL 7037 TS Inmold stainless steel RAL 9006 Nickel plated IG RAL9006/White grey WAWG WGR Silk white/grey SW/G KU/S Packing unit VPEH Combination of finishes Silk white Terra black RAL 9006 Stainless steel Silk white Terra black White grey Dust grey 27

28 TANDEMBOX antaro Order specification High fronted pull-out gallery D M drawer side 2a, 2b Drawer sides and cover caps left/right 8 Longside gallery rail left/right SW TS RAL9006 SW TS RAL9006 Nominal length Stainless steel Nominal length Stainless steel 270 mm 378M2702SA 378M2702IA 270 mm ZRG.207RSIC ZRG.207RIIC 300 mm 378M3002SA 378M3002IA 300 mm ZRG.237RSIC ZRG.237RIIC 350 mm 378M3502SA 378M3502IA 350 mm ZRG.287RSIC ZRG.287RIIC 400 mm 378M4002SA 378M4002IA 400 mm ZRG.337RSIC ZRG.337RIIC 450 mm 378M4502SA 378M4502IA 450 mm ZRG.387RSIC ZRG.387RIIC 500 mm 378M5002SA 378M5002IA 500 mm ZRG.437RSIC ZRG.437RIIC 550 mm 378M5502SA 378M5502IA 550 mm ZRG.487RSIC ZRG.487RIIC 600 mm 378M6002SA 378M6002IA 600 mm ZRG.537RSIC ZRG.537RIIC 650 mm 378M6502SA 378M6502IA 650 mm ZRG.587RSIC ZRG.587RIIC 3 Back fixing and gallery fixing left/right Front stabilisation For stabilising wide and high fronts Z96.10E1 SW TS RAL9006 Nickel plated Z30D000SL Reinforces the connection between the drawer side and the front back 28 Planning 28 4 Front fixing bracket Page instructions INSERTA version Screw-on version Knock-in version ZSF.3902 ZSF.3502 ZSF.3602 Additional parts for an aluminium front Design element TANDEMBOX cabinet profile

29 Planning information TANDEMBOX antaro High fronted pull-out gallery D M drawer side Space requirements in cabinet Front dimensions Back installation dimensions FA Front overlay Space requirement NL Nominal length Cutting dim. for 16 mm chipboard Back LW - 87 mm LW - 75 mm 199 mm Base Chipboard back NL - 24 mm back NL - 22 mm LW KB A KB Cabinet width LW Inner cabinet width NL Nominal length B Page instructions Assembly, removal and adjustment 29 29

30 TANDEMBOX antaro Order specification High fronted pull-out gallery D K drawer side 2a, 2b, 2c Drawer sides and cover caps left/right 8 Longside gallery rail left/right SW TS RAL9006 SW TS RAL9006 Nominal length Nominal length 270 mm 378K2702SA 270 mm ZRG.207RSIC 300 mm 378K3002SA 300 mm ZRG.237RSIC 350 mm 378K3502SA 350 mm ZRG.287RSIC 400 mm 378K4002SA 400 mm ZRG.337RSIC 450 mm 378K4502SA 450 mm ZRG.387RSIC 500 mm 378K5002SA 500 mm ZRG.437RSIC 550 mm 378K5502SA 550 mm ZRG.487RSIC 600 mm 378K6002SA 600 mm ZRG.537RSIC 650 mm 378K6502SA 650 mm ZRG.587RSIC 3 Back fixing and gallery fixing left/right Front stabilisation For stabilising wide and high fronts Z96.10E1 SW TS RAL9006 Z30D000SL Reinforces the connection between the drawer side and the front back 30 Planning 30 4 Front fixing bracket Page instructions INSERTA version Screw-on version ZSF.3902 ZSF.3502 Additional parts for an aluminium frame front TANDEMBOX cabinet profile Knock-in version ZSF

31 Planning information TANDEMBOX antaro High fronted pull-out gallery D K drawer side Space requirements in cabinet Front dimensions Back installation dimensions FA Front overlay Space requirement NL Nominal length Cutting dim. for 16 mm chipboard Back LW - 87 mm LW - 75 mm 199 mm Base Chipboard back NL - 24 mm back NL - 22 mm LW KB A KB Cabinet width LW Inner cabinet width NL Nominal length B Page instructions Assembly, removal and adjustment 31 31

TANDEMBOX antaro Order specification High fronted pull-out gallery C M drawer side 2a, 2b Drawer sides and cover caps left/right 8 Longside gallery rail left/right SW TS RAL9006 SW TS RAL9006 Nominal

32 TANDEMBOX antaro Order specification High fronted pull-out gallery C M drawer side 2a, 2b Drawer sides and cover caps left/right 8 Longside gallery rail left/right SW TS RAL9006 SW TS RAL9006 Nominal length Stainless steel Nominal length Stainless steel 270 mm 378M2702SA 378M2702IA 270 mm ZRG.207RSIC ZRG.207RIIC 300 mm 378M3002SA 378M3002IA 300 mm ZRG.237RSIC ZRG.237RIIC 350 mm 378M3502SA 378M3502IA 350 mm ZRG.287RSIC ZRG.287RIIC 400 mm 378M4002SA 378M4002IA 400 mm ZRG.337RSIC ZRG.337RIIC 450 mm 378M4502SA 378M4502IA 450 mm ZRG.387RSIC ZRG.387RIIC 500 mm 378M5002SA 378M5002IA 500 mm ZRG.437RSIC ZRG.437RIIC 550 mm 378M5502SA 378M5502IA 550 mm ZRG.487RSIC ZRG.487RIIC 600 mm 378M6002SA 378M6002IA 600 mm ZRG.537RSIC ZRG.537RIIC 650 mm 378M6502SA 378M6502IA 650 mm ZRG.587RSIC ZRG.587RIIC 3 Back fixing and gallery fixing left/right Front stabilisation For stabilising wide and high fronts Z96.10E1 SW TS RAL9006 Nickel plated Z30C000S Reinforces the connection between the drawer side and the front back 32 Planning 32 4 Front fixing bracket Page instructions INSERTA version Screw-on version Knock-in version ZSF.3902 ZSF.3502 ZSF.3602 Additional parts for an aluminium front Design element TANDEMBOX cabinet profile

33 Planning information TANDEMBOX antaro High fronted pull-out gallery C M drawer side Space requirements in cabinet Front dimensions Back installation dimensions FA Front overlay Space requirement NL Nominal length Cutting dim. for 16 mm chipboard Back LW - 87 mm LW - 75 mm 167 mm Base Chipboard back NL - 24 mm back NL - 22 mm LW KB A KB Cabinet width LW Inner cabinet width NL Nominal length B Page instructions Assembly, removal and adjustment 33 33

TANDEMBOX antaro Order specification Inner pull-out gallery D M drawer side 2a, 2b Drawer sides and cover caps left/right 7a Cross gallery 3 4a, 4b, 4c SW TS RAL9006 Nominal length Stainless steel

34 TANDEMBOX antaro Order specification Inner pull-out gallery D M drawer side 2a, 2b Drawer sides and cover caps left/right 7a Cross gallery 3 4a, 4b, 4c SW TS RAL9006 Nominal length Stainless steel 270 mm 300 mm 350 mm 400 mm 450 mm 500 mm 550 mm 600 mm 650 mm 378M2702SA 378M3002SA 378M3502SA 378M4002SA 378M4502SA 378M5002SA 378M5502SA 378M6002SA 378M6502SA 378M2702IA 378M3002IA 378M3502IA 378M4002IA 378M4502IA 378M5002IA 378M5502IA 378M6002IA 378M6502IA Back fixing and gallery fixing left/right SW TS RAL9006 Nickel plated Z30D000SL back 34 Front fixing left/right SW S WGR RAL7037 Nylon ZIF.74D0 Incl. locking piece Z31A0008 Incl. gallery heads ZRG.000R5F SW TS RAL9006 Nickel plated Aluminium For cutting to size ZRG.1046Z 8 Longside gallery rail left/right SW TS RAL9006 Nominal length NL Stainless steel 270 mm ZRG.207RSIC ZRG.207RIIC 300 mm ZRG.237RSIC ZRG.237RIIC 350 mm ZRG.287RSIC ZRG.287RIIC 400 mm ZRG.337RSIC ZRG.337RIIC 450 mm ZRG.387RSIC ZRG.387RIIC 500 mm ZRG.437RSIC ZRG.437RIIC 550 mm ZRG.487RSIC ZRG.487RIIC 600 mm ZRG.537RSIC ZRG.537RIIC 650 mm ZRG.587RSIC ZRG.587RIIC Page instructions Design element 34 TANDEMBOX cabinet profile 34 5 Front section For cutting to size SW TS RAL9006 Nickel plated Aluminium Z31L1036A 34

35 Planning information TANDEMBOX antaro Inner pull-out gallery D M drawer side Space requirements in cabinet Back installation dimensions Space requirement Front piece for cutting to size NL Nominal length X = LW Cutting dim. for 16 mm chipboard Back 199 mm LW - 87 mm Base Chipboard back NL - 24 mm back NL - 22 mm LW - 75 mm LW KB A KB Cabinet width LW Inner cabinet width NL Nominal length B Cross gallery for cutting to size X = LW Page instructions Assembly, removal and adjustment 35 35

TANDEMBOX antaro Order specification Inner pull-out gallery D K drawer side 2a, 2b, 2c Drawer sides and cover caps left/right 7a Cross gallery SW TS RAL9006 SW TS RAL9006 Nominal length Aluminium 270

36 TANDEMBOX antaro Order specification Inner pull-out gallery D K drawer side 2a, 2b, 2c Drawer sides and cover caps left/right 7a Cross gallery SW TS RAL9006 SW TS RAL9006 Nominal length Aluminium 270 mm 378K2702SA For cutting to size ZRG.1046Z 300 mm 378K3002SA 350 mm 378K3502SA 8 Longside gallery rail left/right 400 mm 378K4002SA 450 mm 378K4502SA SW TS RAL mm 378K5002SA Nominal length 550 mm 378K5502SA 270 mm ZRG.207RSIC 600 mm 378K6002SA 300 mm ZRG.237RSIC 650 mm 378K6502SA 350 mm ZRG.287RSIC 400 mm ZRG.337RSIC 3 Back fixing and gallery fixing left/right 450 mm ZRG.387RSIC 500 mm ZRG.437RSIC SW TS RAL mm ZRG.487RSIC 600 mm ZRG.537RSIC Z30D000SL 650 mm ZRG.587RSIC back 36 Page instructions 4a, 4b, 4c Front fixing left/right TANDEMBOX cabinet profile 36 SW S WGR Nylon ZIF.74D0 Incl. locking piece Z31A0008 Incl. gallery heads ZRG.000R5F 5 Front section SW TS RAL9006 Aluminium For cutting to size Z31L1036A 36

37 Planning information TANDEMBOX antaro Inner pull-out gallery D K drawer side Space requirements in cabinet Back installation dimensions Space requirement Front piece for cutting to size NL Nominal length X = LW Cutting dim. for 16 mm chipboard Back 199 mm LW - 87 mm Base Chipboard back NL - 24 mm back NL - 22 mm LW - 75 mm LW KB A KB Cabinet width LW Inner cabinet width NL Nominal length B Cross gallery for cutting to size X = LW Page instructions Assembly, removal and adjustment 37 37

TANDEMBOX antaro Order specification Inner pull-out gallery C M drawer side 2a, 2b Drawer sides and cover caps left/right 7a Cross gallery 3 4a, 4b, 4c SW TS RAL9006 Nominal length Stainless steel

38 TANDEMBOX antaro Order specification Inner pull-out gallery C M drawer side 2a, 2b Drawer sides and cover caps left/right 7a Cross gallery 3 4a, 4b, 4c SW TS RAL9006 Nominal length Stainless steel 270 mm 300 mm 350 mm 400 mm 450 mm 500 mm 550 mm 600 mm 650 mm 378M2702SA 378M3002SA 378M3502SA 378M4002SA 378M4502SA 378M5002SA 378M5502SA 378M6002SA 378M6502SA 378M2702IA 378M3002IA 378M3502IA 378M4002IA 378M4502IA 378M5002IA 378M5502IA 378M6002IA 378M6502IA Back fixing and gallery fixing left/right SW TS RAL9006 Nickel plated Z30C000S back 38 Front fixing left/right SW S WGR RAL7037 Nylon ZIF.74C0 Incl. locking piece Z31A0008 Incl. gallery heads ZRG.000R5F SW TS RAL9006 Nickel plated Aluminium For cutting to size ZRG.1046Z 8 Longside gallery rail left/right SW TS RAL9006 Nominal length Stainless steel 270 mm ZRG.207RSIC ZRG.207RIIC 300 mm ZRG.237RSIC ZRG.237RIIC 350 mm ZRG.287RSIC ZRG.287RIIC 400 mm ZRG.337RSIC ZRG.337RIIC 450 mm ZRG.387RSIC ZRG.387RIIC 500 mm ZRG.437RSIC ZRG.437RIIC 550 mm ZRG.487RSIC ZRG.487RIIC 600 mm ZRG.537RSIC ZRG.537RIIC 650 mm ZRG.587RSIC ZRG.587RIIC Page instructions Design element 38 TANDEMBOX cabinet profile 38 5 Front section For cutting to size SW TS RAL9006 Nickel plated Aluminium Z31L1036A 38

39 Planning information TANDEMBOX antaro Inner pull-out gallery C M drawer side Space requirements in cabinet Back installation dimensions Space requirement Front piece for cutting to size NL Nominal length X = LW Cutting dim. for 16 mm chipboard Back 167 mm LW - 87 mm Base Chipboard back NL - 24 mm back NL - 22 mm LW - 75 mm LW KB A KB Cabinet width LW Inner cabinet width NL Nominal length B Cross gallery for cutting to size X = LW Page instructions Assembly, removal and adjustment 39 39

40 TANDEMBOX antaro Order specification Design element D M drawer side Locking piece set 15a 15b 15c SW S WGR RAL7037 Nylon Includes: Z36D0080 locking pieces front upper (transparent) locking pieces front lower (transparent) 1x locking piece left/right 15c 16 15a 16 Einschubelement Design Consisting of: 2 pieces Nominal length 270 mm 300 mm 350 mm 400 mm 450 mm 500 mm 550 mm 600 mm 650 mm Glass Clear Frosted Z37R237D Z37R267D Z37R317D Z37R367D Z37R417D Z37R467D Z37R517D Z37R567D Z37R617D 15b Design element cutting dimensions In combination with TANDEMBOX antaro no impact test for vertical glass components is stipulated due to the dimensions given, see standard (DIN EN release Nov. 2005). Safety glass is not required in order to comply with the standard. 16 Metal design element (can be cut down to suit smaller NL) Nominal length SW TS RAL9006 Aluminium 270 mm = 237 mm 300 mm = 267 mm 350 mm = 317 mm 400 mm = 367 mm 450 mm Z37A417D 500 mm Z37A467D 550 mm Z37A517D 600 mm = 567 mm 650 mm Z37A617D X = NL - 33 Page instructions Assembly, removal and adjustment 40 40

41 Order specification TANDEMBOX antaro Design element C M drawer side Halteteile-Set Locking piece set 15a 15b 15c SW S WGR RAL7037 Nylon Includes: Z36C0080 locking pieces front upper (transparent) locking pieces front lower (transparent) 1x locking piece left/right 15c 16 15a 16 Einschubelement Design Consisting of: 2 pieces Nominal length 270 mm 300 mm 350 mm 400 mm 450 mm 500 mm 550 mm 600 mm 650 mm Glass Clear Frosted Z37R237C Z37R267C Z37R317C Z37R367C Z37R417C Z37R467C Z37R517C Z37R567C Z37R617C 15b Design element cutting dimensions In combination with TANDEMBOX antaro no impact test for vertical glass components is stipulated due to the dimensions given, see standard (DIN EN release Nov. 2005). Safety glass is not required in order to comply with the standard. 16 Metal design element (can be cut down to suit smaller NL) Nominal length SW TS RAL9006 Aluminium 270 mm 300 mm 350 mm 400 mm = 237 mm = 267 mm = 317 mm = 367 mm 450 mm 500 mm 550 mm 600 mm 650 mm Z37A417D Z37A467D Z37A517D = 567 mm Z37A617D X = NL - 33 Page instructions Assembly, removal and adjustment 41 41

TANDEMBOX antaro Order specification High fronted pull-out with an alu frame gallery D/C M drawer side Icon image 4 Front fixing bracket Page instructions Screw-on version

42 TANDEMBOX antaro Order specification High fronted pull-out with an alu frame gallery D/C M drawer side Icon image 4 Front fixing bracket Page instructions Screw-on version ZSF.3502 Design element TANDEMBOX cabinet profile d Adapter for alu frames, symmetrical natural/white Nylon ZRF a Gallery head natural/white Nylon ZRG.000R5F 42

43 Planning information TANDEMBOX antaro High fronted pull-out with an alu frame gallery D/C M drawer side Space requirements in cabinet Front dimensions Back installation dimensions FA Front overlay Height D Height C * Height C min 159 * Height C 96 Space requirement * * Height C 192 NL Nominal length Cutting dim. for 16 mm chipboard Back LW - 87 mm LW - 75 mm * Height C mm* Base Chipboard back NL - 24 mm back NL - 22 mm LW KB A KB Cabinet width LW Inner cabinet width NL Nominal length B Page instructions Assembly, removal and adjustment 43 43

TANDEMBOX antaro Order specification SPACE CORNER mit with SYNCROMOTION Icon image High fronted pull-out Colour SPACE CORNER with SYNCROMOTION gallery D SW TS RAL9006 Stainless steel High fronted

44 TANDEMBOX antaro Order specification SPACE CORNER mit with SYNCROMOTION Icon image High fronted pull-out Colour SPACE CORNER with SYNCROMOTION gallery D SW TS RAL9006 Stainless steel High fronted pull-out Colour SPACE CORNER with SYNCROMOTION Drawer gallery C SPACE CORNER with SYNCROMOTION M 196 Colour SW SW TS TS RAL9006 RAL9006 Stainless steel Stainless steel Planning Help with planning and ordering Short-URL Order specification Design element TANDEMBOX cabinet profile

Order specification TANDEMBOX antaro SPACE CORNER mit with starren rigid fronts Fronten Icon image High fronted pull-out Colour SPACE CORNER with Rigid fronts gallery D SW TS RAL9006 Stainless steel

45 Order specification TANDEMBOX antaro SPACE CORNER mit with starren rigid fronts Fronten Icon image High fronted pull-out Colour SPACE CORNER with Rigid fronts gallery D SW TS RAL9006 Stainless steel Drawer Colour SPACE CORNER with Rigid fronts M SW TS RAL9006 Stainless steel Planning Help with planning and ordering Short-URL Order specification Design element TANDEMBOX cabinet profile

TANDEMBOX antaro Order specification Sink pull-out gallery D M drawer side 2a, 2b Drawer sides and cover caps left/right 11 Sink drawer side left/right SW TS RAL9006 SW TS RAL9006 Nominal length

46 TANDEMBOX antaro Order specification Sink pull-out gallery D M drawer side 2a, 2b Drawer sides and cover caps left/right 11 Sink drawer side left/right SW TS RAL9006 SW TS RAL9006 Nominal length Stainless steel Nominal length Stainless steel 450 mm 378M4502SA 378M4502IA 450 mm 378M4504SG 378M4504IG 500 mm 378M5002SA 378M5002IA 500 mm 378M5004SG 378M5004IG 550 mm 378M5502SA 378M5502IA 550 mm 378M5504SG 378M5504IG 600 mm 378M6002SA 378M6002IA 600 mm 378M6004SG 378M6004IG 650 mm 378M6502SA 378M6502IA 650 mm 378M6504SG 378M6504IG 3 Back fixing and gallery fixing left/right 12 Back fixing left/right SW TS RAL9006 Nickel plated SW TS RAL9006 Nickel plated Z30D000SL Z30N000S.04 back 46 back Front fixing bracket INSERTA version Screw-on version Knock-in version ZSF.3902 ZSF.3502 ZSF.3602 Longside gallery rail left/right SW TS RAL9006 Nominal length Stainless steel 450 mm ZRG.387RSIC ZRG.387RIIC 500 mm ZRG.437RSIC ZRG.437RIIC 550 mm ZRG.487RSIC ZRG.487RIIC 600 mm ZRG.537RSIC ZRG.537RIIC 650 mm ZRG.587RSIC ZRG.587RIIC 13 Adapter left/right Planning Page instructions Design element Front stabilisation For stabilising wide and high fronts Reinforces the connection between the drawer side and the front TANDEMBOX cabinet profile RAL7037 Nylon Z30N0002.6Z Z96.10E

47 Planning information TANDEMBOX antaro Sink pull-out gallery D M drawer side Space requirements in cabinet Front dimensions Back installation dimensions Divider dimensions FA Front overlay Space requirement NL Nominal length Cutting dim. for 16 mm chipboard B1 Y1-12 B2 Back 199 mm Y2-12 Y1 Y2 A SPW LW - 75 C SPW - 86 Y min. = 48 mm Y max. = 225 mm Base NL - 24 mm Centre piece 53 mm KB Cabinet width LW Inner cabinet width NL Nominal length SPW Internal width between sink drawer sides We recommend planning with DYNALOG. Page instructions Assembly, removal and adjustment 67 47

48 TANDEMBOX antaro Order specification Sink pull-out gallery C M drawer side 2a, 2b Drawer sides and cover caps left/right 11 Sink drawer side left/right SW TS RAL9006 SW TS RAL9006 Nominal length Stainless steel Nominal length Stainless steel 450 mm 378M4502SA 378M4502IA 450 mm 378M4504SG 378M4504IG 500 mm 378M5002SA 378M5002IA 500 mm 378M5004SG 378M5004IG 550 mm 378M5502SA 378M5502IA 550 mm 378M5504SG 378M5504IG 600 mm 378M6002SA 378M6002IA 600 mm 378M6004SG 378M6004IG 650 mm 378M6502SA 378M6502IA 650 mm 378M6504SG 378M6504IG 3 Back fixing and gallery fixing left/right 12 Back fixing left/right SW TS RAL9006 Nickel plated SW TS RAL9006 Nickel plated Z30C000S Z30N000S.04 back 48 back Front fixing bracket INSERTA version Screw-on version Knock-in version ZSF.3902 ZSF.3502 ZSF.3602 Longside gallery rail left/right SW TS RAL9006 Nominal length Stainless steel 450 mm ZRG.387RSIC ZRG.387RIIC 500 mm ZRG.437RSIC ZRG.437RIIC 550 mm ZRG.487RSIC ZRG.487RIIC 600 mm ZRG.537RSIC ZRG.537RIIC 650 mm ZRG.587RSIC ZRG.587RIIC 13 Adapter left/right Front stabilisation For stabilising wide and high fronts Reinforces the connection between the drawer side and the front Planning Page instructions Design element TANDEMBOX cabinet profile RAL7037 Nylon Z30N0002.6Z Z96.10E

49 Planning information TANDEMBOX antaro Sink pull-out gallery C M drawer side Space requirements in cabinet Front dimensions Back installation dimensions Divider dimensions FA Front overlay Space requirement NL Nominal length Cutting dim. for 16 mm chipboard B1 Y1-12 B2 Back 167 mm Y2-12 Y1 Y2 A SPW LW - 75 C SPW - 86 Y min. = 48 mm Y max. = 225 mm Base NL - 24 mm Centre piece 53 mm KB Cabinet width LW Inner cabinet width NL Nominal length SPW Internal width between sink drawer sides We recommend planning with DYNALOG. Page instructions Assembly, removal and adjustment 67 49

50 TANDEMBOX antaro Order specification Drawer K 2a, 2b, 2c Drawer sides and cover caps left/right Nominal length 270 mm 300 mm 350 mm 400 mm 450 mm 500 mm 550 mm 600 mm 650 mm SW TS RAL K2702SA 378K3002SA 378K3502SA 378K4002SA 378K4502SA 378K5002SA 378K5502SA 378K6002SA 378K6502SA 3 Back fixing left/right back SW TS RAL9006 Z30K000S 50 4 Front fixing bracket INSERTA version Screw-on version Knock-in version ZSF.3902 ZSF.3502 ZSF.3602 Page instructions TANDEMBOX cabinet profile 50 50

51 Planning information TANDEMBOX antaro Drawer K Space requirements in cabinet Front dimensions Back installation dimensions FA Front overlay min min 33 Space requirement NL Nominal length Cutting dim. for 16 mm chipboard Back LW - 87 mm LW - 75 mm 116 mm Base Chipboard back NL - 24 mm back NL - 22 mm LW KB A KB Cabinet width LW Inner cabinet width NL Nominal length B Page instructions Assembly, removal and adjustment 51 51

TANDEMBOX antaro Order specification Drawer M 3 2a, 2b Drawer sides and cover caps left/right Nominal length 270 mm 300 mm 350 mm 400 mm 450 mm 500 mm 550 mm 600 mm 650 mm SW TS RAL9006 378M2702SA

52 TANDEMBOX antaro Order specification Drawer M 3 2a, 2b Drawer sides and cover caps left/right Nominal length 270 mm 300 mm 350 mm 400 mm 450 mm 500 mm 550 mm 600 mm 650 mm SW TS RAL M2702SA 378M3002SA 378M3502SA 378M4002SA 378M4502SA 378M5002SA 378M5502SA 378M6002SA 378M6502SA Stainless steel 378M2702IA 378M3002IA 378M3502IA 378M4002IA 378M4502IA 378M5002IA 378M5502IA 378M6002IA 378M6502IA 3 Back fixing left/right SW TS RAL9006 Nickel plated back Z30M000S Front fixing bracket INSERTA version Screw-on version Knock-in version ZSF.3902 ZSF.3502 ZSF.3602 Page instructions TANDEMBOX cabinet profile 52 52

53 Planning information TANDEMBOX antaro Drawer M Space requirements in cabinet Front dimensions Back installation dimensions FA Front overlay 12 Space requirement NL Nominal length Cutting dim. for 16 mm chipboard Back LW - 87 mm 84 mm Base Chipboard back KB LW A B NL - 24 mm back LW - 75 mm NL - 22 mm KB LW NL Cabinet width Inner cabinet width Nominal length Page instructions Assembly, removal and adjustment 53 53

54 TANDEMBOX antaro Order specification Drawer N 3 2a, 2b Drawer sides and cover caps left/right Nominal length 400 mm 450 mm 500 mm 550 mm SW TS RAL N4002SA 378N4502SA 378N5002SA 378N5502SA Stainless steel 378N4002IA 378N4502IA 378N5002IA 378N5502IA 3 Back fixing left/right SW TS RAL9006 Nickel plated back Z30N000S Front fixing bracket INSERTA version Screw-on version Knock-in version ZSF.3902 ZSF.3502 ZSF.3602 Page instructions TANDEMBOX cabinet profile 54 54

55 Planning information TANDEMBOX antaro Drawer N Space requirements in cabinet Front dimensions Back installation dimensions FA Front overlay 12 Space requirement NL Nominal length Cutting dim. for 16 mm chipboard Back LW - 87 mm 69 mm Base Chipboard back KB LW A B NL - 24 mm back LW - 75 mm NL - 22 mm KB LW NL Cabinet width Inner cabinet width Nominal length Page instructions Assembly, removal and adjustment 55 55

TANDEMBOX antaro Order specification Inner drawer K 2a, 2b, 2c Drawer sides and cover caps left/right 6a Handle SW TS RAL9006 SW S WGR Nominal length Nylon 270 mm 378K2702SA ZIF.

56 TANDEMBOX antaro Order specification Inner drawer K 2a, 2b, 2c Drawer sides and cover caps left/right 6a Handle SW TS RAL9006 SW S WGR Nominal length Nylon 270 mm 378K2702SA ZIF.80M5 300 mm 378K3002SA Alternative to 6a 350 mm 378K3502SA 6b Handle and latch (optional) 400 mm 378K4002SA 450 mm 378K4502SA SW S WGR 500 mm 378K5002SA Nylon 550 mm 378K5502SA ZIF.80M7 600 mm 378K6002SA 650 mm 378K6502SA Page instructions TANDEMBOX cabinet profile 56 3 Back fixing left/right SW TS RAL9006 Z30K000S back 56 4a, 4c Front fixing left/right Incl. locking piece Z31A0008 SW S Nylon ZIF.71K0 WGR 5 Front section For cutting to size SW TS RAL9006 Aluminium Z31L1036A 56

57 Planning information TANDEMBOX antaro Inner drawer K Space requirements in cabinet Front drilling distance for latch Back installation dimensions min min 33 Space requirement Front piece for cutting to size NL Nominal length X = LW Cutting dim. for 16 mm chipboard Back LW - 87 mm LW - 75 mm 116 mm Base Chipboard back NL - 24 mm back NL - 22 mm LW KB A KB Cabinet width LW Inner cabinet width NL Nominal length B Page instructions Assembly, removal and adjustment 57 57

TANDEMBOX antaro Order specification Inner drawer M 3 2a, 2b Drawer sides and cover caps left/right 6a Handle SW TS RAL9006 SW S WGR RAL7037 Nominal length Stainless steel Nylon 270 mm 378M2702SA

58 TANDEMBOX antaro Order specification Inner drawer M 3 2a, 2b Drawer sides and cover caps left/right 6a Handle SW TS RAL9006 SW S WGR RAL7037 Nominal length Stainless steel Nylon 270 mm 378M2702SA 378M2702IA ZIF.80M5 300 mm 378M3002SA 378M3002IA Alternative to 6a 350 mm 378M3502SA 378M3502IA 6b Handle and latch (optional) 400 mm 378M4002SA 378M4002IA 450 mm 378M4502SA 378M4502IA SW S WGR RAL mm 378M5002SA 378M5002IA Nylon 550 mm 378M5502SA 378M5502IA ZIF.80M7 600 mm 378M6002SA 378M6002IA 650 mm 378M6502SA 378M6502IA Page instructions TANDEMBOX cabinet profile 58 3 Back fixing left/right back SW TS RAL9006 Nickel plated Z30M000S a, 4c Front fixing left/right SW Incl. locking piece Z31A0008 S WGR RAL7037 Nylon ZIF.71M0 5 Front section For cutting to size SW TS RAL9006 Nickel plated Aluminium Z31L1036A 58

59 Planning information TANDEMBOX antaro Inner drawer M Space requirements in cabinet Front drilling distance for latch Back installation dimensions * With ZIF.80M7 can be used with height 73 and higher Space requirement Front piece for cutting to size * With handle ZIF.80M7 NL Nominal length X = LW Cutting dim. for 16 mm chipboard Back LW - 87 mm LW - 75 mm 84 mm Base Chipboard back NL - 24 mm back NL - 22 mm LW KB A KB Cabinet width LW Inner cabinet width NL Nominal length B Page instructions Assembly, removal and adjustment 59 59

60 TANDEMBOX antaro Order specification TANDEMBOX cabinet profile Cabinet profiles left/right BLUMOTION* TIP-ON Nominal length 30 kg 50 kg 65 kg 20 kg 30 kg 50 kg 270 mm B T 300 mm B T 350 mm B T 400 mm B T 450 mm B B B T 500 mm B B B T 550 mm B B B T 600 mm B B T 650 mm B B T * Suitable for SERVO-DRIVE Cabinet profile fixing positions Cabinet profile 559B 50 kg Cabinet profile kg * 450 * * 600 * 650 Cabinet profile kg Cabinet profile 559T 20/30/50 kg A B * 270 * * * 450 * A Chipboard screw Ø 4 x 15 mm B System screw Part no * Optional 60

61 Order specification TANDEMBOX antaro Accessories back N back SW TS RAL9006 Nickel plated Z30NxxxS.6 M back SW TS RAL9006 Nickel plated Z30MxxxS.6 K drawer back SW TS RAL9006 Z30KxxxS.6 C drawer back SW TS RAL9006 Nickel plated Z30CxxxS.6 D back SW TS RAL9006 Nickel plated Z30DxxxS.6 Calculation of width Cutting dim. for 16 mm chipboard Base A NL - 22 mm LW - 75 mm LW Inner cabinet width xxx Width Example: Internal cabinet width 567 mm - 28 mm = back width 539 mm Order: Z30M539S in white LW Inner cabinet width NL Nominal length 61

62 TANDEMBOX antaro Order and planning information Accessories Back and gallery fixing B M drawer side Back fixing and gallery fixing left/right SW TS RAL9006 Nickel plated Z30B000S.04 Space requirements in cabinet Front dimensions Back installation dimensions FA Front overlay Accessories flexible gallery fixing Flexible gallery fixing SW TS RAL9006 Nickel plated ZRR.5200 Space requirements in cabinet Front dimensions Back installation dimensions Space requirements in cabinet Front dimensions Back installation dimensions Free placement Y = X - 4 mm X Back height Free placement Z = X - 71 mm X Back height FA Front overlay Free placement W = X mm X Back height Height D double gallery (back fixing bracket height B) Height D double gallery (back fixing bracket height B) FA Front overlay Height D double gallery (back fixing bracket height B) 62

63 9 6 Order specification TANDEMBOX antaro Accessories Front stabilisation Space requirements in cabinet Front dimensions Ø min 47.5 Ø X (min 55) min 10 63

64 TANDEMBOX antaro Assembly, removal and adjustment High fronted pull-out Tilt adjustment 5 6 Comment: If a gallery rod is adjusted, the same adjustment must be made on all remaining rods Height adjustment + side adjustment Comment: Both sides require adjustment 64

65 Assembly, removal and adjustment TANDEMBOX antaro Design element

66 TANDEMBOX antaro Assembly, removal and adjustment Inner pull-out 1 2 X = LW LW = inner cabinet width X = LW LW = inner cabinet width Locking piece 9 10 Starting with cabinet width > 600 mm Design element assembly 66 66

67 Assembly, removal and adjustment TANDEMBOX antaro Alu frame Sink pull-out Gallery assembly and adjustment 67 Cover cap assembly Design element assembly

68 TANDEMBOX antaro Assembly, removal and adjustment Design element removal Gallery removal high fronted pull-out Front removal

69 Assembly, removal and adjustment TANDEMBOX antaro Gallery removal inner pull-out Gallery removal alu frame

70 TANDEMBOX antaro Assembly, removal and adjustment Drawer Height adjustment + side adjustment Comment: Both sides require adjustment Inner drawer X = LW LW Inner cabinet width 4 Locking piece 5 Starting with cabinet width > 600 mm 70

71 Assembly, removal and adjustment TANDEMBOX antaro Handle and latch Centre mount 1 Latch activated Release 1 2 Deactivate latch 1 2 Front removal

72 Blum Founded over 60 years ago by Julius Blum, today Blum is an internationally active family-owned company. Its strategic business segments include hinge, pull-out and lift systems. All our product developments focus on perfecting motion. 72

Blum in Austria and around the world The company has seven plants in Vorarlberg, Austria, additional production sites in Poland, the

The Blum Group employs 6,600 people in total, 5,000 of whom work in Vorarlberg.

Blum products that is Blum s philosophy on global customer benefits.

consistently invest in research and development, in plants and facilities and in employee training.

Quality At Blum, the comprehensive concept of quality does not only apply to products.

Environment At Blum, we believe that responsible ecological behaviour has long-term economic benefits.

73 Blum in Austria and around the world The company has seven plants in Vorarlberg, Austria, additional production sites in Poland, the USA and Brazil and 27 subsidiaries/representative offices. Blum supplies more than 100 markets. The Blum Group employs 6,600 people in total, 5,000 of whom work in Vorarlberg. Global customer benefits Whether manufacturer, distributor, fitter or kitchen user everybody should personally enjoy the benefits of Blum products that is Blum s philosophy on global customer benefits. Innovations To support customers with innovative fittings solutions and secure long-term success for the company, we need to consistently invest in research and development, in plants and facilities and in employee training. With more than 1200 registered trademarks around the world, Blum is one of Austria's most innovative companies. Quality At Blum, the comprehensive concept of quality does not only apply to products. Services and our cooperation with customers and partners should also meet the same quality requirements. Environment At Blum, we believe that responsible ecological behaviour has long-term economic benefits. The longevity of products is just one important aspect of many. Further important measures include the use of environmentally friendly processes, intelligent use of materials and prudent energy management. DYNAMIC SPACE Good workflows, sufficient storage space and ease of use are important features of a practical kitchen. With its ideas for practical kitchens, Blum aims to bring function, convenience and ergonomics to the interior of furniture. 73

74 Subject to technical modifications and changes to the range without notice. All content is copyrighted by Blum. Printed in Austria IDNR: EP-204/5 EN-AL/ Julius Blum GmbH Furniture Fittings Mfg Höchst, Austria Tel.: Fax:

MALAYSIA. Set price guide. A quick reference for Blum products and prices.

MALAYSIA. Set price guide. A quick reference for Blum products and prices. MALAYSIA 2018 Set price guide A quick reference for Blum products and prices www.blum.com Contents 4 4 5 6 TANDEMBOX antaro Standard drawers / High-fronted pull-outs Inner drawer / Inner pull-out sets