DISPENSA junior III OUR SUCCESSFUL THIRD GENERATION STORAGE FITTING

Transcription

1 EN KESSEBÖHMER CLEVER STORAGE DISPENSA junior III OUR SUCCESSFUL THIRD GENERATION STORAGE FITTING

2 2

3 A FRESH BREEZE FOR OUR BESTSELLER THE ENTIRE DISPENSA FAMILY PROFITS FROM THE NEW FLEXIBILITY

4 QUICK QUICKER ClickFixx SIMPLE, TOOLLESS ASSEMBLY ClickFixx The front panel is clipped onto the fitting QUICK, EASY, PRECISE: ClickFixx ASSEMBLY SAVES VALUABLE ASSEMBLY TIME AND ENSURES CONSISTENTLY HIGH QUALITY. Assembly of the DISPENSA junior III has been simplified on two fronts at the same time. First and nothing could be simpler the fitting is snapped into the runner. Then the front panel is clipped onto the fitting it s quick and accurate and no tools are needed. Finally the pull-out is closed and opened job done! The entire assembly is designed for highly flexible integration into the manufacturing process chain. The DISPENSA junior III is equally suited for side or bottom mounting to suit requirements and installation conditions. ClickFixx assembly and real-time adjustment together guarantee high assembly quality while cutting installation time to a minimum.

5 The fitting is positioned on the runner. Open it close it job done!

6 Vertical adjustment Carcase contact Horizontal adjustment BENEFITS AT A GLANCE Toolless assembly based on ClickFixx 3D adjustment in real time Optimized for industrial processing Side-mounted installation for 16 mm and 19 mm panel thickness Bottom mounting is ideal for retrofits For all carcase widths from 300 mm to 600 mm Front panel tilt

7 3D 3D ADJUSTMENT IN REAL TIME SEE WHAT YOU RE DOING! THE DISPENSA junior III MAKES FOR SIMPLER FRONT PANEL ADJUSTMENT THAN EVER BEFORE: FULL 3D ADJUSTMENT IN REAL TIME! Once the front panel has been ClickFixxed quickly and securely to the new DISPENSA junior III, it can be adjusted in real time in all planes and directions. The process is quick and totally reliable! Because even the slightest turn of an adjusting screw has an immediate effect on the front panel position. All it takes is a PZ2 screwdriver to intuitively make the following adjustments: right/left (alignment), top/ bottom (front panel height) horizontal tilt (carcase contact) and vertical tilt (alignment). Because any change shows in real time, front panel adjustment for the DISPENSA junior III is now even faster and more accurate.

8 Cabinet widths mm Access from both sides Change tray height easily Same choice of standard DISPENSA trays as for tall cabinets Bottom and side mounting Standard with: Choice of tray styles Metal baskets ARENA Classic ARENA Style ARENA Vario

9 LB = Clear inside carcase width: carcase width B-32/38 mm LT = Clear inside carcase depth: 480 mm LH = Clear inside carcase height: 631 mm 16/ Y LH min Dimensions in mm B LT min. 480 DISPENSA junior III side mounting Fitting set Consisting of: 1 fitting 2 runners (for side-mounting) 1 set front panel connectors Standard with damping Dimensions (mm) 16 mm side panels Carcase width: mm side panels Carcase width: Art. no

10 LB = Clear inside carcase width: carcase width B-40 mm LT = Clear inside carcase depth: 480 mm LH = Clear inside carcase height: 631 mm B B B B Y LH min B-75 Dimensions in mm Art. no Dimensions (mm) Carcase width: DISPENSA junior III bottom-panel mounting Fitting set consisting of: 1 fitting 2 runners (for mounting on bottom panel) 1 set front panel connectors Standard with: Damping

11 LB = Clear inside carcase width: carcase width B-40 mm LT = Clear inside carcase depth: 480 mm LH = Clear inside carcase height: 631 mm B B Y 45, LH min B-75 Dimensions in mm DISPENSA junior III bottom-panel mounting Fitting set consisting of: 1 fitting 2 runners (for mounting on bottom panel) 1 set front panel connectors Dimensions (mm) Carcase width: Art. no Standard with: Damping

12 BASE UNIT FITTINGS The larder unit under the counter. All the tray styles developed for the DISPENSA tall units also fit a DISPENSA junior III. This makes it easy to create a harmonious look behind the fronts in a kitchen with the DISPENSA family. Having the same look and the same functionality for example, ARENA variants, easy height change, access from both sides extends all the benefits of a tall larder unit to the base unit fittings as well. In addition to the choice of DISPENSA standard trays, there s an extra highlight for the DISPENSA junior III in the shape of a special clip-on basket with a bread bag.

13 ARENA Style hook-on trays (PU 10) for carcase widths: 300 mm 400 mm 450 mm 500 mm 600 mm On request with anti-slip coating Dimensions (mm) WxDxH 250 x 462 x x 462 x x 462 x x 462 x x 462 x 94 Art. no Dividers for ARENA Style for hook-on trays (PU 10 pcs) for carcase widths: 300 mm 400 mm Hook-on trays ARENA Vario (PU 10 pcs) for carcase widths: 300 mm On request with 400 mm anti-slip coating WxDxH 250 x 462 x x 462 x Hook-on trays ARENA Classic (PU 10 pcs) for carcase widths: 300 mm 400 mm 450 mm 500 mm On request with 600 mm anti-slip coating WxDxH 250 x 462 x x 462 x x 462 x x 462 x x 462 x DISPENSA hook-on metal basket (PU 10 pcs) for carcase widths: 300 mm 400 mm 450 mm 500 mm 600 mm WxDxH 250 x 467 x x 467 x x 467 x x 467 x x 467 x Divider for ARENA Classic and metal basket (PU 100 pcs) for carcase widths: 300 mm 400 mm Plastic containers to insert in metal hook-on baskets (PU 10 pcs) for carcase widths: 300 mm (Art ) 400 mm (Art ) WxDxH 238 x 450 x x 450 x DISPENSA hook-on metal basket with bread bag (PU 1 pcs) for carcase widths: 300 mm 400 mm WxDxH 250 x 462 x x 462 x

14

15 Kesseböhmer GmbH Mindener Str Bad Essen Germany Phone +49 (57 42)