9.3 Fittings for wardrobe interiors 9.3.0

Transcription

1 9.3 Fittings for wardrobe interiors Interior fittings for wardrobes

2 9.3 Fittings for wardrobe interiors Interior fittings for wardrobes 9.3.1

3 Range summary 9.3 Fittings for wardrobe interiors i Rota Depot Garment lifts Illuminated coat rail Wardrobe rails and wardrobe rail supports Clothes-hanger holder and garment rails Trouser holders Interior fittings for wardrobes range summary

4 i Range summary 9.3 Fittings for wardrobe interiors Tie and belt rack Slide holders Combination pull-out fitting Storage baskets and wire shelves Pull-out shoe-rack frame and shoe racks Pull-out mirror Interior fittings for wardrobes range summary 9.3.3

5 Interior fittings for wardrobes Rota Depot Rota Depot provides optimum organisation, easy access and perfect use of storage space in any wardrobe In terms of space organisation, wardrobe depth is divided into two the sturdy turning centre upright holds individually configured shelf elements and clip-on baskets Height-adjustable centre upright with swivel fitting Swivel fitting can be screwed to top and bottom panel, centre upright can the be threaded in without the need for tools Load capacity 100 kg Minimum internal cabinet dimensions Width 700, 750 and 900 mm (depends on the interior fittings) Height mm Depth 550 mm Centre upright, plastic-coated steel, silver Swivel fitting, plastic/silver steel Set contains: Height-adjustable centre upright Swivel fitting set Clip-on baskets Simply clipped into the centre upright For min. internal cabinet widths 700 or 900 mm Chrome-plated steel For minimum Width x depth x height internal cabinet width mm mm x 529 x / x 529 x / Interior fittings for wardrobes Rota Depot

6 Interior fittings for wardrobes Rota Depot End rail To close off the open end of clip-on baskets, if required Length 515 mm Chrome-plated steel /2 Trouser and tie holder With tray and non-slip coating Simply clipped into the centre upright For minimum internal cabinet width 750 mm Width 333 mm Depth 537 mm Height 48 mm Chrome-plated steel = ,5 259,5 33,5 32 = Distance piece for height adjustment of centre upright = min. 700 min. 750 min. 900 = min. 550 Interior fittings for wardrobes Rota Depot 9.3.5

7 Interior fittings for wardrobes Garment lift Single Lift 12 Load capacity 12 kg Telescopic width adjustment range 100 mm Locks into lowered position Spacer for bridging door protrusion Garment lift, chrome-plated steel Housing, pivot arm and spacer bracket, plastic/steel, aluminium finish Article Single Lift 12, left Single Lift 12, right Distance bracket, 20 mm min min. 500 max.1200 max Lower garment lift with grip rod ( clicking sound) 2. Hang or unhang garment 3. Pull lift down by grip rod to release lock and then allow lift to return to raised position with grip rod. Distance bracket 225 Duo Lift 10 Connection on both sides Load capacity 10 kg Telescopic width adjustment for inside cabinet width mm Additional extension rail Installation in System 32 Spacer for bridging door protrusion Garment lift, chrome-plated steel Housing, pivot arm and spacer bracket, plastic/steel, aluminium finish Article Duo Lift Distance bracket, 20 mm min. 750 max min Distance bracket Interior fittings for wardrobes garment lift

8 Interior fittings for wardrobes Garment lift Duo Lift Basic Connection on both sides Load capacity 10 kg Installation in System 32 Spacer for bridging door protrusion Garment lift, anodised aluminium Housing, pivot arm and spacer bracket, plastic/aluminium black min. 600/830 / max. 830/1150/ min Distance bracket Article Duo Lift Basic mm Duo Lift Basic mm Distance bracket, 20 mm Duo Lift 15 Connection on both sides Load capacity 15 kg Telescopic width adjustment for inside cabinet width mm Installation in System 32 Can also be fitted in the area of existing door hinges by using a special recess in the housing Spacer for bridging door protrusion Garment lift, chrome-plated steel Housing, pivot arm and spacer bracket, plastic/steel, aluminium finish min. 750 max Distanzstück Article Duo Lift Distance bracket, 20 mm Interior fittings for wardrobes garment lift 9.3.7

9 Interior fittings for wardrobes Garment lift Duo Lift 18 Connection on both sides Load capacity kg Telescopic width adjustment for inside cabinet width mm Installation in System 32 4 spring tension settings Spacer for bridging door protrusion Garment lift, chrome-plated steel Housing, pivot arm and spacer bracket, plastic/steel, aluminium finish Article Duo Lift Distance bracket, 20 mm min. 750 max min Distance bracket 55 Spring tension setting 1 = minimum 4 = maximum Garment lift Wall Wall connection Telescopic width adjustment for inside cabinet width mm Installation in System 32 Garment lift, chrome-plated steel Housing and pivot arm, steel, aluminium finish 300 min. 750 max kg Interior fittings for wardrobes garment lift

10 Interior fittings for wardrobes Illuminated coat rail High voltage fluorescent light (230 V) F 8 W/13 W Lamp: T5 Ready assembled, illuminated wardrobe garment rail including electronic ballast and wardrobe rail supports With rocker switch or motion detector, can be shortened 3 m supply lead with HV plug connector HV feeders need to be ordered separately Textured aluminium profile with silver anodised surface Only suitable for use in the following countries: United Kingdom, Republic of Ireland, Switzerland, Germany, Estonia, Finland, Iceland, Italy, Lithuania, Luxembourg, Netherlands, Norway, Austria, Portugal, Russia, Sweden, Spain, Turkey, Hungary, France, Belgium, Czech Republic, Poland other countries on request Dimming not possible! Article Length mm Can be cut to mm Illuminated coat rail 8 W with rocker switch Illuminated coat rail 13 W with rocker switch Illuminated coat rail 8 W with motion detector Illuminated coat rail 13 W with motion detector High-voltage feeder V With 2000 mm supply lead Article Euro Connector UK plug HV feeder Rocker switch 27 Illuminated coat rail 35,5 14 max. 105 min. 560 min. 780 max max. 165 max HV feeder Rocker switch Motion detector 27 Illuminated coat rail 35,5 Motion detector 14 max. 105 min. 650 min. 870 max max. 165 max Motion detector function: Detects even the tiniest, slowest movements, using the passive infrared principle. Remains lit approx. 30 seconds after detecting movement. Detection range approx. 5 m/110, Ambient temperature 0 to +40 C, power draw in standby 1 W Interior fittings for wardrobes illuminated coat rail 9.3.9

11 Interior fittings for wardrobes Oval wardrobe rails Length 5000 mm Matt nickel-plated steel /10 15 Length 2000 or 5000 mm High-gloss chrome-plated steel 30 Length mm / /10 15 Length 3000 mm Aluminium / Interior fittings for wardrobes wardrobe tube

12 Interior fittings for wardrobes Oval wardrobe rails Length 3000 mm Plastic-coated steel, white /10 15 Length 3000 mm Plastic-coated steel, aluminium-coloured /10 15 Length 3000 mm Plastic-coated steel, brass-coloured /10 15 Interior fittings for wardrobes wardrobe tube

13 Interior fittings for wardrobes Wardrobe tube bearing Wardrobe tube bearing SL 322 DD With 3 holes for screw fixing Hole spacing 32 mm Nickel-plated, zinc die-cast /50 3 5,4 42, mm spax screw 9, ,8 15, ,6 15 Wardrobe tube length = internal cabinet width 7 Wardrobe tube bearing SL 323 DD With 2 lugs for pressing into 5 mm holes Distance between lugs 32 mm 1 additional screw hole Nickel-plated, zinc die-cast /50 3 ø4,9 5,4 42,8 4 mm spax screw ,8 15,2 7, ,6 15 Wardrobe tube length = internal cabinet width Interior fittings for wardrobes wardrobe tube bearing

14 Interior fittings for wardrobes Wardrobe rail support and centre support Wardrobe tube bearing SL 786 DD For screw fixing below shelf Using special M6 x 25 screw 2 additional screw holes for fixing to side Nickel-plated, zinc die-cast / M6 ø6,5 18 M6 ø6, ø Wardrobe tube length = internal cabinet width 13 Centre support SL 786 DD For screw fixing below shelf Using special M6 x 25 screw 2 additional screw holes for fixing to side Nickel-plated, zinc die-cast /50 M6 M6 ø6,5 10, ø8 5,5 M6 ø6, ,5 18, Wardrobe tube length = internal cabinet width 13 Interior fittings for wardrobes wardrobe tube bearing

15 Interior fittings for wardrobes Wardrobe tube bearing With 3 holes for screw fixing Hole distance 32 mm Steel, lacquered, white /50 With 3 holes for screw fixing Hole distance 32 mm Steel, lacquered, aluminium-coloured /50 With 3 holes for screw fixing Hole distance 32 mm Steel, lacquered, brass-coloured /50 3 5,4 42, mm spax screw ,8 15,2 9, ,6 Wardrobe tube length = internal cabinet width Interior fittings for wardrobes wardrobe tube bearing

16 Interior fittings for wardrobes Clothes-hanger holder and garment rails Quadro clothes-hanger holder Telescopic clothes-hanging rail on Quadro Outstanding runner action Quadro, lacquered beige Garment rail, steel, nickel-plated Min. cabinet depth Item length Length A mm mm mm Cabinet front edge 60 Min. cabinet depth Montage VE zwischen unter Korpusseiten Oberboden Garment rail Telescopic Length 310 mm Nickel-plated steel A /50 Garment rail Telescopic Push-in support Length 120 mm Nickel-plated steel/brown plastic Please order knob separately M4 ø7 ø /10 For decorative knob Interior fittings for wardrobes hanging rail

17 Interior fittings for wardrobes Trouser holder Pull-out trouser holder Non-slip rails Loose shelf can be optionally fitted Can be fitted either between wardrobe sides or below top panel Plastic-coated steel, silver /735/ /735/ For Cabinet dimensions Installed cabinet width width x depth x height between underneath mm mm carcase sides top panel x 500 x 37/ x 500 x 37/ x 500 x 37/ Pull-out trouser holder With fixing materials and distance block Width 455 mm Depth 222 mm Height 72 mm Distance block: 22 mm deep to compensate for door protrusion Finish: chrome-plated steel/grey plastic 2 ø min (222 without distance block) Pull-out trouser holder With swivel-action rails with non-slip surface for 10 trousers Width 465 mm Depth 505 mm Height 100 mm Usable left and right Chrome-plated steel, silver plastic coated Swivel-action trouser holder With 7 non-slip rails Width 430 mm Depth 430 mm Height 75 mm Chrome-plated steel Interior fittings for wardrobes trouser holder

18 Interior fittings for wardrobes Combination pull-out fitting and tie rack Combination pull-out fitting Complete with Quadro slide Just pull out, choose what to wear and put it on the practical combination pull-out fitting keeps clothes superbly organised and in easy reach Width 200 mm Depth 480 mm Height 1270 mm Set contains: Frame 2 Quadro slides 2 tie holders, each with 10 non-slip pegs 1 all-purpose holder 1 tray set 200 Pull-out tie rack With 10 holders Includes fixing material and spacer Width 450 mm Depth 89 mm Height 79 mm Usable left and right Plastic-coated steel, silver Pull-out tie rack Includes fixing material and spacer Width 455 mm Depth 74 mm Height 87 mm Distance block: 22 mm deep to compensate for door protrusion Finish: chrome-plated steel/grey plastic 2 ø min (74 without distance block) 87 Pull-out tie rack With 17 non-slip rails Width 130 mm Depth 540 mm Height 90 mm Usable left and right Chrome-plated steel, silver plastic coated Interior fittings for wardrobes tie rack

19 Interior fittings for wardrobes Tie and belt rack Swivel tie rack Complete with support bearing With 10 holders Width 146 mm Depth 13 mm Height 363 mm High-gloss chrome-plated steel Tie rail Length 300 mm Nickel-plated steel /20 Tie rail Rod with gold silk cover Length 385 mm White plastic fixing elements /20 Pull-out tie and belt rack Includes fixing material and spacer Width 455 mm Depth 74 mm Height 118 mm Distance block: 22 mm deep to compensate for door protrusion Finish: chrome-plated steel/grey plastic ø min (74 without distance block) 118 Tie and belt rack Swivel-action, complete with guide bearing Width 255 mm Depth 70 mm Height 300 mm Chrome-plated steel Interior fittings for wardrobes tie and belt rack

20 Interior fittings for wardrobes Slide holders Set of slide holders Complete with Quadro slides Minimum internal cabinet dimensions: Width 768 mm Depth 515 mm Product dimensions: Width 65 mm Depth 495 mm Height 473 mm Chrome-plated steel min. 515 Exclusive pull-out basket For mounting on slide holder, order no Width 680 mm Depth 500 mm Height 160 mm Chrome-plated steel Compact pull-out basket For mounting on slide holder, order no Width 680 mm Depth 500 mm Height 110 mm Chrome-plated steel Shoe rack For mounting on slide holder, order no Width 675 mm Depth 510 mm Height 110 mm Chrome-plated steel Interior fittings for wardrobes slide holders

21 Interior fittings for wardrobes Storage baskets and wire shelves Basket with cut-away handle Supported on sturdy part-extension slides with captive guide rail on the side With continuous width adjustment for internal cabinet widths of and mm Load capacity 15 kg Basket, chrome-plated steel Roller runner, steel, plastic-coated, silver Set contains: 1 basket with cut-away handle 1 set of roller runners Width x depth x height mm 330 x 500 x set 730 x 500 x set Wire shelf Decorative alternatives to loose wooden shelves Dimensions of wire shelf: Depth 490 mm Height 33 mm Load capacity 15 kg Wire shelf, chrome-plated steel Shelf support, self-colour plastic Set contains: Wire shelf 4 combination shelf supports for side panel thickness of 16 or 19 mm /453/553/753/853/953/ /453/553/753/853/953/ For cabinet width For minimum internal mm cabinet width mm / / / / / / / All-purpose pull-out basket Includes fixing material and spacer Width 452 mm Depth 160 mm Height 95 mm Distance block: 22 mm deep to compensate for door protrusion Finish: chrome-plated steel/grey plastic 2 ø min (160 without distance block) Interior fittings for wardrobes baskets

22 Interior fittings for wardrobes Pull-out shoe rack frame and shoe racks Shoe pull-out Full-extension slide With 4 clip on shoe racks Shoe racks can be positioned anywhere on frame to suit personal needs Usable left or right Plastic-coated steel, silver Set contains: Pull-out frame 4 shoe rack set 617 Internal cabinet height Shoe rack Supported on sturdy part-extension slides with captive guide rail on the side With continuous width adjustment for internal cabinet widths of and mm Load capacity 15 kg Shoe rack, chrome-plated steel Roller runner, plastic-coated steel, silver Set contains: 1 shoe rack 1 set of roller runners Width x depth x height mm 330 x 500 x set 730 x 500 x set Shoe rack For direct attachment to the wall or inside the wardrobe Chrome-plated steel Adapter, plastic, aluminium finish 74 Matching support rails, see below Width-adjustable mm / / Support rail for shoe rack For up to 6 shoe racks, one above the other (order no and ) For screw-mounting to the wall Width 30 mm Depth 15 mm Height 1120 mm Rail, aluminium End caps, plastic Set contains: 2 support rails set Interior fittings for wardrobes shoe rack

23 Interior fittings for wardrobes Shoe rack Shoe rack For direct attachment to the wall or inside the wardrobe Chrome-plated steel 74 Adapter, plastic, aluminium finish Width-adjustable mm / / Shoe rack Floor assembly Plastic-coated steel, silver Width x depth x height mm 316 x 47 x x 47 x x 47 x x 47 x Shoe cabinet fitting For mounting in any width of show cupboard White plastic Set contains: 2 side sections with front connection on left side and right side 2 pivot bearings 2 end stops Number of compartments set set set Assembly Shoe cabinet fitting for 1 compartment Shoe cabinet fitting for 2 compartments Shoe cabinet fitting for 3 compartments , min min min min min min min min. 135 min , ,5 min min min Interior fittings for wardrobes shoe rack

24 Interior fittings for wardrobes Shoe racks and mirror Shoe rack Screws on to individually opening cabinet flaps or to the inside of the cabinet side panels or furniture fronts Chrome-plated steel Assembly Width x depth x height mm 290 x 145 x x 145 x x 145 x x 145 x /390/490/ /381/481/ /368/468/668 Pull-out, turning mirror Usable left and right With magnetic strip to prevent unintentional opening Frame and handle, aluminium Stands proud 38 mm Pull-out depth 450 mm Set contains: Mirror Pull-out Dimensions of mirror height x width mm 580 x set 1155 x set Interior fittings for wardrobes shoe racks and mirror

25 9.4 Fittings for furnishing rooms Room furnishing

26 9.4 Fittings for furnishing rooms Room furnishing 9.4.1

27 Range summary 9.4 Fittings for furnishing rooms i Shelf system Amari Multi-functional column Highline Range summary for furnishing rooms

28 Fittings for furnishing rooms Shelf system Amari Boundless flexibility regardless of living-space situation the Amari shelf system can be used to construct almost anything you choose. Amari can be integrated without a problem in all rooms to create a pleasant ambience. Technical brief: Aluminium anodised Wide range of applications Lighting optional Extendible in any way chosen Easy and quick to install Room furnishing shelf system Amari 9.4.3

29 Fittings for furnishing rooms Shelf system Amari Floor/wall connection Room furnishing shelf system Amari

30 Fittings for furnishing rooms Shelf system Amari Floor/ceiling connection Room furnishing shelf system Amari 9.4.5

31 Fittings for furnishing rooms Shelf system Amari Floor/wall connection profile External trim profile in ribbed look can optionally be substituted for plastic trim profiles, order no or Anodised aluminium Set contains: 2 profiles with mitres Fixing accessories 6,5 54, ,2 R set Floor/ceiling profile With external trim profile in ribbed look Anodised aluminium Set contains: Profile Fixing accessories 6,5 54, ,2 R set Plastic trim profile For illumination Can be used on floor/wall connecting profile, order no (see above) Can be shortened as required Optionally, light source can be fitted into the profile Length 2090/289 mm Transparent Set contains: 2 plastic panels with mitre set 6,5 19,2 R /289 Plastic trim profile For illumination limited to specific areas Can be used on - Floor/wall connection profile, order no Floor/ceiling profile, order no Can be shortened as required Optionally, light source can be fitted into the profile Length 1000 mm Transparent ,5 19,2 R / Room furnishing shelf system Amari

32 Fittings for furnishing rooms Shelf system Amari Cabinet support Load capacity 60 kg Aluminium die-cast ,8 Set contains: 4 cabinet supports Fixing accessories ø set Shelf supports For shelf thicknesses of 5-25 mm Load capacity 20 kg (glass), 30 kg (wood) Zinc die-cast/aluminium finish Set contains: 2 shelf supports set Garment rail supports Load capacity 30 kg Suitable for 30 x 15 mm garment rails, e.g. order no , see page Zinc die-cast/aluminium finish Set contains: 2 garment rail supports set Plastic trim profiles (order no and , see page 9.4.6) for illumination Room furnishing shelf system Amari 9.4.7

33 Fittings for furnishing rooms Shelf system Amari Garment rail Length 2875 mm Can be shortened as required Anodized aluminium, ribbed For other garment rails, see pages Garment hooks For sliding onto garment rail Anodised aluminium Shoe rack Anti-slip cross rail Aluminium die-cast /anodized aluminium, ribbed 10 5 Set contains: Left and right-hand support 2 cross rails Width mm set set Shoe-rack supports For variable-width shoe rack in combination with garment rail, e.g. order no , see above Aluminiu die-cast set Room furnishing shelf system Amari

34 Fittings for furnishing rooms Shelf system Amari Installation, e.g. in bathroom Garment Kleiderstange rail = L Shelf Boden = L - 8 Cabinet Korpus = L L L + 25! Max. distance between two profiles 1200 mm Room furnishing shelf system Amari 9.4.9

35 Fittings for furnishing rooms Shelf system Amari Example: hall unit Ordering example: hall unit The following items are required to construct the combination shown above: Article Quantity Floor/wall connection profile x Shelf support x Floor/ceiling profile x Cabinet support x Garment rail supports x Garment rail x Shoe rack x Room furnishing shelf system Amari

36 Fittings for furnishing rooms Shelf system Amari Example: dressing area/office Dressing Office Room furnishing shelf system Amari

37 Fittings for furnishing rooms Multi-functional column Highline System details and example application Creative room design for kitchens and living rooms Multi-functional column with practical storage system Functional element can be selected to suit personal requirements Toolless assembly Glass rack Swivel bar Rotating shelf, centre-mounted on column Rotating shelf with swivel arm Swivel shelf Bistro table Simple principle, sturdy design and quality Using only 4 centre column heights it is possible to cover virtually all fitting situations occurring in the kitchen environment. Examples Long centre column from floor to ceiling. Long centre column fed through worktop. Long centre column from floor to canopy. Centre column and adapter for sloping ceilings, from worktop to sloping ceiling. Medium-sized centre column from worktop to canopy. Short centre column from floor to just above the worktop, fitted to the cabinet side. Supports and holders are fixed to the functional column with hexagon socket screws. All other functional elements, e.g. turning shelf, glass rack, support for post table are positioned by means of the lock/bearing ring on the column. The lock ring fixes the position of the bearing ring. These then support the particular functional element. oben Room furnishing multi-functional column Highline

38 Fittings for furnishing rooms Multi-functional column Highline Centre column dia. 50 mm Alternatively for screw or adhesive mounting For suitable adapters, see below Set contains: Bottom support with cover ring Adhesive film Top cap Length mm incl. accessories chrome-plated high-gloss matt chrome-plated The tested adhesive fixing system for example provides a secure connection to floors with underfloor heating as well as to tiled or parquet floors without the need for screws and drilling holes. 36 ø8 Column length = clear height 25 mm ø8 30 Adapter for centre columns on sloping ceilings Swivel range 180 Finish chrome-plated matt high-gloss chrome-plated ,5 Room furnishing multi-functional column Highline

39 Fittings for furnishing rooms Multi-functional column Highline Support elements Support for fixing centre column to wall Width 250 mm Depth 312 mm Height 24 mm 250 ø8 ø Finish chrome-plated matt high-gloss chrome-plated Large support for fixing centre column to wall Width 310 mm Depth 455 mm Height 25 mm 300 ø8 ø Finish chrome-plated matt high-gloss chrome-plated Support for fixing centre column to cabinet Width 192 mm Depth 160 mm Height 24 mm 128 ø7 130 ø8 30 Finish chrome-plated matt high-gloss chrome-plated Room furnishing multi-functional column Highline

40 Fittings for furnishing rooms Multi-functional column Highline Accessories Support for worktop With cover ring Load capacity 40 kg Width 310 mm Depth 185 mm Height 27 mm Finish chrome-plated matt high-gloss chrome-plated Swivel bar For multi-purpose use Load capacity 5 kg Height 50 mm Length 360 mm Tube ø 16 mm 360 Finish chrome-plated matt high-gloss chrome-plated Circular rotating shelf with all-metal base Centre-mounted on column Load capacity 5 kg Height 50 mm Diameter 360 mm ø360 Finish chrome-plated matt high-gloss chrome-plated High round basket with all-metal base Centre-mounted on column Load capacity 5 kg Height 185 mm Diameter 360 mm Basket height 150 mm ø Finish chrome-plated matt high-gloss chrome-plated Room furnishing multi-functional column Highline

41 Fittings for furnishing rooms Multi-functional column Highline Accessories Circular rotating shelf with all-metal base Including swivel arm Load capacity 5 kg Height 90 mm Diameter 360 mm ø Finish chrome-plated matt high-gloss chrome-plated High round basket with all-metal base Including swivel arm Load capacity 5 kg Height 190 mm Diameter 315 mm Basket height150 mm 190 ø Finish chrome-plated matt high-gloss chrome-plated Circular rotating shelf with glass base Including swivel arm Load capacity 5 kg Height 100 mm Diameter 364 mm Glass thickness 6 mm ø Finish chrome-plated matt high-gloss chrome-plated Swivel shelf with all-metal base Load capacity 5 kg Width 355 mm Depth 420 mm Height 50 mm Finish chrome-plated matt high-gloss chrome-plated Room furnishing multi-functional column Highline

42 Fittings for furnishing rooms Multi-functional column Highline Accessories Swivel shelf with glass base Including swivel arm Load capacity 5 kg Width 358 mm Depth 376 mm Height 100 mm Glass thickness 6 mm Finish chrome-plated matt high-gloss chrome-plated Glass rack For 6 glasses Load capacity 5 kg Height 50 mm Diameter 300 mm 300 Finish chrome-plated matt high-gloss chrome-plated Support arm for bistro table Includes setting ring Load capacity 15 kg For wooden table tops in max. dia. of 600 mm Height 170 mm Finish chrome-plated matt high-gloss chrome-plated Swivel arm 290 Includes setting ring For table top Load capacity 40 kg Width 256 mm Depth 290 mm Height 50 mm ø60 Finish chrome-plated matt high-gloss chrome-plated Room furnishing multi-functional column Highline

43 Fittings for furnishing rooms Multi-functional column Highline Accessories Table stand On wheels Height adjustable by 100 mm Load capacity 40 kg Table stand height mm Width 540 mm Depth 116 mm Table stand height mm Width 540 mm Depth 116 mm ø Finish / Table stand height 670 mm 1035 mm chrome-plated matt high-gloss chrome-plated Table fixing Includes swivel bearing For fitting to worktops Load capacity 40 kg Height 185 mm 180 ø40 Finish chrome-plated matt high-gloss chrome-plated Example swivel arm order no / extension table top + table stand order no / ø max Positions for fixing extension table top on swivel arm and table stand Example table fixing order no / extension table top + table stand order no / Room furnishing multi-functional column Highline

44 Fittings for furnishing rooms Multi-functional column Highline Elements for fitting to room dividers Support For wooden or glass shelves Load capacity 15 kg per support Width 200 mm Depth 100 mm Height 50 mm 200 Finish chrome-plated matt /2 high-gloss chrome-plated /2 Double support For wooden or glass shelves Load capacity 15 kg per double support Width 200 mm Depth 140 mm Height 50 mm Finish chrome-plated matt high-gloss chrome-plated Glass shelf Load capacity 20 kg Glass thickness 8 mm Width 300/400 mm Depth 850 mm /400 Width mm Assembly ø ø Room furnishing multi-functional column Highline

45 Fittings for furnishing rooms Room furnishing