SPECIFIER S GUIDE JUNE CI/SfB 73.1 X

Transcription

1

2 CI/SfB 73.1 X SPECIFIER S GUIDE JUNE 2009 By appointment to Her Majesty The Queen Manufacturers and Installers of Kitchen and Bathroom Furniture Manhattan Furniture West Sussex

3 INTRODUCTION Welcome to Manhattan s Specifier s Guide, our most comprehensive to date. Carefully compiled to offer greater flexibility and versatility in order to meet your creative aspirations. For practical ergonomics of a totally functional kitchen to an environment that is the heart of the home with added value features our range of units offers plenty of exciting solutions for both contemporary and traditional kitchens. CONTENTS INDEX Carcase Key Features Independent Certification FIRA Standards General dimensions (Noggins) Cubic capacities Coding guidelines Base, Highboard, Tall and Wall Units Base units Base units reduced depth Base bottle storage units Base corner units Magic corner & LeMans Base corner L shaped units Base unit corner fillets Base corner post Base drawer units (metalsided drawer system) Base drawer units (fullextension soft closing drawer system) Base angled end display units Base angled peninsular display unit Base square end display units Base square peninsular display unit Feature: base square end display units Feature: base square peninsular display unit Base display back panels Base display back panel fixing kit Base fly end panels Base gullwing Base oven housing units Base microwave housing unit Base integrated appliance space conversion kit Base unit infill panels Base tray space Base wine rack unit Feature: base wine rack unit with bottle supports Base sink units Base corner sink units Sink Liners Highboard housing units Highboard Unit Infill Panels Tall broom units Tall unit corner fillets (for tall housings set at 45 degrees) 650mm Extra deep ends Tall housing units Tall housing with Upgraded stays Tall pullout larder units Tall unit infill panels Tall unit shelves Tall Wine Rack Units Wall units (360mm high) Wall units (575, 720 & 900mm high) Wall units (dual handed doors) Wall boiler housing units Wall boiler dresser housing units 21 Wall corner units 22 Wall corner units 575 high 22 Wall corner angled units 22 Wall corner angled unit fillets 22 Wall display angled unit fillets 23 Wall corner L shaped units 23 Wall display units (360 & 492mm high) 23 Wall display units (720 & 900mm high) Wall display angled corner units Wall display glazed dresser units Wall display angled end units Wall display square end units Feature: wall square end display units Wall display glazed units Wall Display glazed units with aluminium framed doors Feature: wall display plate rack unit Wall display dresser unit and worktop infills Wall display dresser tambour units Wall display bifolding units Wall glass shelves Wall unit infill panels Wall dresser unit infill panels Wall microwave housing units Wall microwave with Upgraded stays Window soffits Feature: window soffits Chimney hood soffits Wall soil & vent pipe infill spice rack Wall wine racks Integrated extractor hood Integrated extractor hood infill panel Telescopic cooker hoods Pilasters Pilaster decor panels (16mm thick) Decor and Framing panel Decor panel selfadhesive cover caps Upstands Enable Units and Accessories enable: Base units reduced height enable: Base drawer units enable: Base drawer unit with pullout table surface enable: Base corner units enable: Mobile trolley unit enable: Worktop blanking pelmet enable: Base corner unit blanking panel enable: Halfcircle, fullextension carousels enable: Highboard housing units enable: Tall housing units enable: Wall units enable: Worktop support bracket enable: Base unit support bracket enable: Electronic worktop power lift Kitchen Accessories Cornice & Light fascia Plinths & Plinth returns Plinth Sealer Plinth ventilation grills Upstands Half swing baskets Breakfast bar legs Pilasters Self adhesive cover caps Timber battens Worktops Worktop bolts Cable Managment Hinge Options Upgraide for Soft Close doors & Drawer Bathrooms: General dimensions (Noggins) Base units Corner base units Drawer unit Sink base units WC units Bidet units Bath Bulkheads Base infills Corner post Plinth Plinth returns Pedistal infills Wall units Wall unit infills Tall units Bath panels Worktops Cornice & Light fascia Bathroom Detailing: Tall units Bulkheads Worktops with WC base units MANHATTAN SPECIFIER S GUIDE

4 CARCASE MATERIAL KEY FEATURES All carcase units are produced from 16mm high density (660670Kg/cubic metre) melamine faced particle board. This is manufactured to BS EN 3121, Class 1, low formaldehyde content and BS EN 312 Part 2 and meets the requirements of both BS EN 7331, 1990 and BS All exposed ends are lipped using high quality 0.4mm matching PVC edging, applied using a combination of hot melt glue, heat and pressure, which meets the requirements of BS6250 and BS6222 Part 3, 1993 for moisture and heat resistance. All interiors are colour matched to the exterior of the carcase. End panels and display units are supplied in either white or a variety of woodgrain MFC effects to coordinate with individual ranges. DRAWER SYSTEM KEY FEATURES All Manhattan ranges come fitted with a metalsided drawer system. Tested to BS6222 Part , Level H, to ensure strength and durability. Pressed steel mounting brackets enable perfect alignment of drawer fronts. Long self closing action enables drawers to close at the slightest touch with Silent running roller system. Manufactured from pressed formed high quality steel, with drawer sides and runners finished in long lasting epoxy coating, with easily replaceable components in the event of accidental damage Solid drawer bottom and back, manufactured from 16mm MFC to match the carcase colour. Option to have soft closing drawers available as a upgrade, the drawer are twinwalled with full extension runners, this option will be available for all base and tall units.d HINGE KEY FEATURES All carcase units are supplied with top quality, fully concealed hinges. Tested to BS6222 Part 2, Level H. Tested to 200,000 opening/closing cycles. Interestingly, a 15 year research study showed that the most commonly used doors in the kitchen are opened and closed up to 170,000 times in a 15 year period. Our hinges are therefore fit for at least 20 years of service. Hinge mounting plates are attached to the carcase by Euroscrews to provide greater strength and durability. All hinges are supplied with stainless steel decorative cover caps. 107 o opening hinges are supplied as standard. 172 o opening hinges are available on request. Option to have soft closing hinges, available as a upgrade for 107 o & 172 o opening hinges available on request. ADJUSTABLE LEGS KEY FEATURES Manhattan s Base, Highboard and Tall units are fitted with adjustable legs to provide the following benefits; More accurate levelling of units to compensate for uneven floors, thus reducing installation time and eliminating the need for packing wedges. Protection from moisture and flooding by keeping the units 150mm clear of the floor. Provision of a natural service zone for plumbing, electric s and ducting, enabling services to run at skirting board level and facilitating installation. This also ensures flush fitting of appliances. Better load distribution, thus reducing stress on fittings and joints. Easier fixing of plinth's. Allows flooring to be fixed after the installation of the units. BASE UNIT KEY FEATURES 107 o 3way adjustable, fully concealed Clip hinges (172 o hinges are available as an option). Metalsided drawer system. Adjustable legs. 16mm MFC Removable solid back panel 16mm MFC. Foil wrapped MDF mullions to 800, 1000 & 1200mm units. Horizontal front rail. Adjustable shelves. High impact shelf retaining clips. Galvanised zinc metal wall fixing brackets. Easily removable continuous plinth. 70mm additional service zone. Shelves to 800, 1000 & 1200mm units are supported with additional clips to front and back to prevent bowing under load. SINK UNIT KEY FEATURES Absence of back panel allows direct access to plumbing and removes the need for an unsightly notched panel. Shortened bottom panel with upturn provides a 70mm void for pipework and services to enter the carcase. UPVC door closing strip to 800, 1000 & 1200mm units. A back panel can be supplied as an optional extra. WALL UNIT KEY FEATURES 316mm deep carcase to provide the additional storage space so often needed. Concealed wall hanging brackets are 3way adjustable to ensure perfect alignment and maximum loading capacity. Minifix cam dowel construction with additional wooden dowels for extra strength and rigidity. Foil wrapped MDF mullions to 800, 1000 & 1200mm units. Rear MFC blocks glued to the 800, 1000 & 1200mm units for extra strength and rigidity. 8mm solid back panels to woodgrain effect display units. Shelves to 800, 1000 & 1200mm units are supported with additional clips at the front and back to prevent bowing under load. 107 o 3way adjustable, fully concealed Clip hinges (172 o opening hinges are available on request). MANHATTAN SPECIFIER S GUIDE 3

5 INDEPENDENT CERTIFICATION The first kitchen manufacturer to be awarded the Furniture Industry Research Association FIRA Gold Award for Product to test level H, for heavy domestic use. This provides: Confidence that the purchased product has been evaluated by the UK s leading furniture technology centre. Assurance that testing has been undertaken to the latest applicable British and European Standards. Impartial verification of quality and performance. The first contract kitchen manufacturer to also hold the Furniture Industry Research Association FIRA Gold Award for Installation. This provides: Confidence that our installation service has been evaluated and approved by the UK s leading furniture technology centre. Peace of mind that the product has been installed to the latest regulations and highest quality. Impartial expert verification of quality. HAPM LIFE ASSESSMENT A benefit of achieving such high standards is that Manhattan achieves an HAPM life assessment of 20 years for carcase components and 25 years for doors and drawer fronts. Housing Association Property Mutual is a club consisting of more than 130 housing associations that provides insurance against premature failure of components, materials and assemblies in new and refurbishment schemes. The scheme is underpinned by a manual of lifespans that provide a series of generic specifications for each component BRITISH SAFETY COUNCIL AWARD Manhattan is a member of the British Safety Council and has regularly received the British Safety Council award. Winner 2006 FOR PRODUCT FOR INSTALLATION STANDARDS REQUIRED TO MEET THE FIRA GOLD AWARD TO TEST LEVEL H STRENGTH AND SAFETY REQUIREMENTS BS 6222, Part 2, 1997 Level H specification for strength requirements and methods of test for fitted kitchen units*. *FIRA test methods based on BS 4875 where other suitable methods are not available. BS 6222, Part 5 Specification for strength requirements and methods for test of peninsular units and breakfast bars. BS EN Domestic & Kitchen storage units and worktops safety requirements SURFACE FINISHES & ADHESION BS 6222, Part Domestic Kitchen Equipment. 'Performance requirements for durability of surface finishes and adhesion of surfacing and edging material'. PARTICLEBOARD AND MDF BS EN Particleboard Specification Type P2 and Type P3 (WPIF Industry Standard) ENVIRONMENTAL PERFORMANCE FIRA Standard 48 & FIRA Standard 6250 Specification Furniture materials (Interior) WORKMANSHIP FIRA Standard 41 & FIRA Standard 6250 Specification Furniture materials (Interior) Subjective assessment of furniture for quality in terms of sharp edges and visual defects ERGONOMICS Dimensions to comply with BS EN 1116, 1996 FTM's and planning accordance with BS 3705 provision of space for domestic kitchen furniture. AUDITING FIRA audits on an annual basis to ensure that the quality and workmanship, features of the Gold Award, are being maintained. BS EN Fibreboards Specifications Part 5 MDF Type MDF (WPIF Industry Standard) WORKTOPS In addition to BS6222 Part (see above) BSEN High pressure decorative laminates (HPL) Sheets based on Thermosetting Resins" Type HGP Part 3 Classification and specifications for laminates less than 2 mm thick. Part 2 Determination of properties. (High and low relative tests are applied mainly to solid wood door types). (Medium and low relative humidity tests apply to worktops). In addition, FIRA carries out its own tests for Workmanship, Environmental Response, and Ergonomic Assessment. 4 MANHATTAN SPECIFIER S GUIDE

6 GENERAL DIMENSIONS (F0R 720mm HIGH WALL UNITS WITH 2120mm TALL UNITS) Wall Unit 360 Wall Unit Base Unit Base Unit 360 Wall Unit 1250 Highboard Unit 1970 Housing Unit & Broom Units Stainless Steel Hood Base Unit SIDE ELEVATION FRONT ELEVATION GENERAL DIMENSIONS (F0R 900mm HIGH WALL UNITS WITH 2300mm TALL UNIT 900 Wall Unit 360 Wall Unit Base Unit 1250 Highboard Unit 2150 Housing Unit & Broom Units Stainless Steel Hood Base Unit CUBIC CAPACITIES SIDE ELEVATION FRONT ELEVATION These are calculated on the internal dimensions of the unit, disregarding all drawers, removable shelves and back panels Note: cubic capacities are calculated in cubic metres. All dimensions are in millimetres. Unit Width 568mm deep, 140mm high drawer units 568mm deep, 575mm high base units 568mm deep, 720mm high base units 568mm deep, 1400mm high h/board units 568mm deep, 2120mm high tall units 568mm deep, 2300mm high tall units 316mm deep, 360mm high wall units 316mm deep, 720mm high wall units 316mm deep, 900mm high wall units 150mm 300mm 400mm 450mm 500mm 600mm 800mm 1000mm 1200mm CODING GUIDELINES Most single door cabinets have left or right hand opening doors and it is therefore essential to quote the correct type when ordering. A door with hinges to the left hand side as you are facing the cabinet is a left hand unit, a door with the hinges to the right hand side is a right hand unit. If an open end display unit is specified on the right hand end of a run of base or wall units, please specify a right hand unit. Likewise, if it is specified on the left at the end of a run of base or wall units, please specify a left hand unit. Similarly, all base and base sink corner cabinets can be left or right handed. If the blanking panel is to the left when facing the cabinet, please specify a left hand model; if the blanking panel is to the right, please specify a right hand unit. Base sink cabinets can also be left or right handed. If the draining board is to be fitted to the left of the unit, please specify a left hand model; if the draining board is to be fitted to the right, please specify a right hand model. Height = from top to bottom Width = from left to right Depth = from back to front MANHATTAN SPECIFIER S GUIDE 5

7 BASE UNITS 568 DEEP With fullheight door With fullheight doors Door height 715mm Door height 715mm 300 Lt Hd 2601 Rt Hd Lt Hd 2611 Rt Hd Lt Hd 2775 Rt Hd Lt Hd 2621 Rt Hd Lt Hd 2641 Rt Hd With drawer NOTE: DRAWERS SUPPLIED WITH METALSIDED DRAWER SYSTEM. With drawers Drawer front, height 140mm Door height 570mm Drawer front, height 140mm Door height 570mm 300 Lt Hd 2603 Rt Hd Lt Hd 2613 Rt Hd Lt Hd 2451 Rt Hd Lt Hd 2623 Rt Hd Lt Hd 2643 Rt Hd NOTE: DRAWERS SUPPLIED WITH METALSIDED DRAWER SYSTEM. BASE UNITS REDUCED DEPTH 316 DEEP With fullheight door With fullheight doors Door height 715mm Door height 715mm 300 Lt Hd 2301 Rt Hd Lt Hd 2303 Rt Hd Lt Hd 2305 Rt Hd Lt Hd 2307 Rt Hd Lt Hd 2309 Rt Hd BASE BOTTLE STORAGE UNIT 568 DEEP With fullheight, pullout door Door height 715mm STAINLESS STEEL DOOR TO MATCH RANGE NOTE: IDEALLY TO BE FITTED EITHER SIDE OF A HOB OR BASE OVEN HOUSING UNIT. NOTE: 2700 UNIT ONLY AVAILABLE WITH A STAINLESS STEEL DOOR. NOTE: 2719 UNIT THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE. 6 MANHATTAN SPECIFIER S GUIDE

8 BASE CORNER UNIT 568 DEEP With fullheight door 600mm WIDE UNIT 800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT (300mm Wide door) (400mm Wide door) (500mm Wide door) (600mm Wide door) **800mm WIDE UNIT *800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT (450mm Wide door) (500mm Wide door) (600mm Wide door) (2 X 400mm Wide doors) 600 Lt Hd 2071 (min ) Rt Hd Lt Hd 2661 (min ) Rt Hd Lt Hd 2663 (min ) Rt Hd Lt Hd 2059 (min 36 78) Rt Hd 2060 **800 Lt Hd 2789 (min ) Rt Hd 2790 *800 Lt Hd 2028 (min ) Rt Hd 2029 *1000 Lt Hd 2031 (min ) Rt Hd 2032 *1200 Lt Hd 2065 (min ) Rt Hd 2066 NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL. With drawer 600mm WIDE UNIT 800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT (300mm Wide door) (400mm Wide door) (500mm Wide door) (600mm Wide door) *800mm WIDE UNIT *800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT (500mm Wide door) (450mm Wide door) 600mm Wide door) (2 X 400mm Wide doors) 600 Lt Hd 2075 (min ) Rt Hd Lt Hd 2657 (min ) Rt Hd Lt Hd 2627 (min ) Rt Hd Lt Hd 2063 (min 36 78) Rt Hd 2064 *800 Lt Hd 2019 (min ) Rt Hd 2020 *800 Lt Hd 2023 (min ) Rt Hd 2024 *1000 Lt Hd 2008 (min ) Rt Hd 2009 *1200 Lt Hd2069 (min ) Rt Hd 2070 NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL. NOTE: DRAWERS SUPPLIED WITH METALSIDED DRAWER SYSTEM. BASE CORNER UNITS WITH PULLOUT MAGIC CORNER MECHANISM 568 DEEP With fullheight door Carcase height 720mm Door height 715mm 1000 Lt Hd 2195 (min ) Rt Hd 2196 *1000 Lt Hd 2197 (min ) Rt Hd mm WIDE UNIT (500mm Wide door) *1000mm WIDE UNIT (600mm Wide door) NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL. CORNER BASE UNIT WITH LE MANS STORAGE MECHANISM The Le Mans storage shelves move completely out of the unit for easy access to both shelves 1000 Lt Hd 2055 (min ) Rt Hd 2056 KITCHEN ACCESSORY HALF CIRCLE, FULL EXTENSION CAROUSELS SIZE Carousels for use in corner units 000 X 000 MECH100A NOTE: CAROUSEL TRAYS SUPPLIED AS A SINGLE ITEM, IT IS RECOMMENDED THAT YOU SUPPLY TWO CAROUSELS PER BASE CORNER UNIT. NOTE: CAROUSEL TRAYS WILL ONLY SUIT 1000MM BASE CORNER UNITS, WITH A DOOR SIZE OF 500MM. MANHATTAN SPECIFIER S GUIDE 7

9 BASE SINK UNITS With fullheight door Door height 715mm 316 DEEP 568 DEE 500 Lt Hd 2669 Rt Hd Lt Hd 2671 Rt Hd 2672 With fullheight doors Door height 715mm With nonworking drawer Nonworking drawer front, height 140mm Door height 570mm 500 Lt Hd 2691 Rt Hd Lt Hd 2696 Rt Hd 2690 With nonworking drawer and drawer Drawer front, height 140mm Door height 570mm 1000 Lt Hd 2633 Rt Hd Lt Hd 2653 Rt Hd 2654 NOTE: DRAWERS SUPPLIED WITH METALSIDED DRAWER SYSTEM. With nonworking drawers Nonworking drawer front, height 140mm Door height 570mm BELFAST SINK UNIT 600 Lt Hd 2749 Rt Hd 2750 NOTE: TO SUIT EXTERNAL SIZE OF 200MM DEEP SINK, USING A SIDE HUNG DOOR 450MM HIGH WITH PANEL ABOVE, THIS SIZE DOOR IS NOT PREFERRED DUE TO SAGGING ON THE HINGES. SINK BOTTOM LINERS Optional extra 500 FACM355A 600 FACM349A 800 FACM350A 900 FACM356A 1000 FACM351A 1200 FACM357A 8 MANHATTAN SPECIFIER S GUIDE

10 BASE SINK BACK PANELS 568 DEEP Optional extra Height 430mm BASE SINK CORNER UNITS With fullheight door 800mm WIDE UNIT **800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT (400mm Wide door) (450mm Wide door) (500mm Wide door) (600mm Wide door) *800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT (500mm Wide door) (600mm Wide door) (2 X 400mm Wide door) 568 DEEP 568 DEEP 800 Lt Hd 2625 (min ) Rt Hd 2626 **800 Lt Hd 2791 (min ) Rt Hd Lt Hd 2631 (min ) Rt Hd Lt Hd 2015 (min 36 78) Rt Hd 2016 *800 Lt Hd 2645 (min ) Rt Hd 2646 *1000 Lt Hd 2649 (min ) Rt Hd 2650 *1200 Lt Hd 2651 (min ) Rt Hd 2652 NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL. With nonworking drawer 800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT (400mm Wide door) (500mm Wide door) (600mm Wide door) 800 Lt Hd 2677 (min ) Rt Hd Lt Hd 2679 (min ) Rt Hd Lt Hd 2017 (min 36 78) Rt Hd 2018 *800 Lt Hd 2681 (min ) Rt Hd 2682 *1000 Lt Hd 2685 (min ) Rt Hd 2686 *1200 Lt Hd 2693 (min ) Rt Hd 2694 *800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT (500mm Wide door) (600mm Wide door) (2 X 400mm Wide door) NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL. BASE UNIT CORNER FILLETS HEIGHT NOTE: FOR USE WITH FLY ENDS WHEN A FREESTANDING APPLIANCE SPACE IS SPECIFIED AGAINST A 45 DEGREE FALSE WALL NOTE: FOR USE WITH A 600MM BASE UNIT SET AGAINST A 45 DEGREE FALS WALL WITH A 600MM WALL UNIT AND WALL DISPLAY ANGLED CORNER UNITS 8713/8913 NOTE: FOR USE WITH A 600MM OVEN HOUSING SET AGAINST A 45 DEGREE FALSE WALL WITH A 600MM COOKER AND WALL DISPLAY ANGLED CORNER UNITS 8713/ BASE CORNER POST HIGH 636 X NOTE: A CORNER POST IS FITTED BETWEEN TWO ADJACENT UNITS WHERE A VOID SPACE IS CREATED IN THE CORNER. MANHATTAN SPECIFIER S GUIDE 9

11 BASE CORNER L SHAPED UNITS 568 DEEP With fullheight doors Door height 715mm With fullheight doors +carousels Door height 715mm With doors and drawers Drawer height 140mm Door height 570mm NOTE: DRAWERS SUPPLIED WITH METALSIDED DRAWER SYSTEM. BASE DISPLAY PENINSULAR BACK PANELS HEIGHT [[[ NOTE: PENINSULAR BACK PANELS SHOULD BE SPECIFIED EITHER 720MM OR 870MM HIGH TO SUIT ADJACENT UNITS. REMEMBER TO SPECIFY HEIGHT, LENGTH AND GRAIN DIRECTION WHEN ORDERING. NOTE: WHEN USED IN CONJUNCTION WITH BASE DISPLAY PENINSULAR UNITS, A BACK PANEL FIXING KIT 6012 MUST BE SPECIFIED (SEE BELOW). BASE DISPLAY PENINSULAR BACK PANEL FIXING KIT VARIABLE VARIABLE NOTE: TO BE SPECIFIED IN CONJUNCTION WITH A BASE PENINSULAR BACK PANEL (SEE ABOVE). BASE FLY END PANELS Without notch Panel height 900mm DEPTH MANHATTAN SPECIFIER S GUIDE

12 BASE DRAWER UNITS WITH METALSIDED THREEQUARTER OPENING DRAWERS 568 DEEP Three drawer unit comprising top drawer and two highsided drawers 450mm deep drawer box, finished in white X Drawer front, height 140mm 2 X Deep drawer fronts, height 283mm Three drawer unit comprising top drawer and two pan drawers with railing system mm deep drawer box, finished in white 1 X Drawer front, height 140mm 2 X Pan drawer fronts, height 283mm Four drawer unit comprising three drawers and one highsided drawer 450mm deep drawer box, finished in white X Drawer fronts, height 140mm 1 X Deep drawer fronts, height 283mm Five drawer unit comprising five standard height drawers 450mm deep drawer box, finished in white 5 X Drawer front, height 140mm BASE DRAWER UNITS WITH TWINWALLED, FULL EXTENSION, SOFT CLOSING DRAWERS 568 DEEP Two drawer unit 450mm deep drawer box, finished in grey 2 X Pan drawer fronts, height 355mm NOTE: PAN DRAWER DIVIDER RAILS FOR INTERNAL STORAGE ORGANISATION ARE SPECIFIED SEPARATELY SEE PAGE 50 NOTE: ON ALL 800MM AND 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DRAWER FRONTS ATTACHED TO EACH OTHER SIDE BY SIDE. Three drawer unit 450mm deep drawer box, finished in grey 1 X Cutlery drawer, height 140mm 2 X Pan drawer fronts, height 283mm NOTE: INTERNAL CUTLERY DRAWERS AND PAN DRAWER DIVIDER RAILS FOR INTERNAL STORAGE ORGANISATION ARE SPECIFIED SEPARATELY SEE PAGE 50 NOTE: ON 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DRAWER FRONTS ATTACHED TO EACH OTHER SIDE BY SIDE. SOFT CLOSING DOORS UPGRAGE OPTION Available with to suit all base, wall, highboard and tall units as an optional upgrade HINGE064A NOTE: THE HING064A = ALL THE DOORS IN ONE KITCHEN, MARK THE QUANTITY OF DOORS IN THE KITCHEN NEXT TO THE HING064A NOTE: NOT SUITABLE FOR BIFOLD WALL UNITS DRAWER UNITS WITH TWINWALLED, FULL EXTENSION, SOFT CLOSING DRAWERS UPGRAGE OPTION Available as un upgrade option to all base and tall units MECH126A NOTE: THE MECH126A = ALL THE DRAWERS IN ONE KITCHEN, MARK THE QUANTITY OF DRAWERS IN THE KITCHEN NEXT TO THE MECH126A NOTE: THIS COMES AS STANDARD ON THE FULL EXTENSION DRAWERS DETAILED ABOVE MANHATTAN SPECIFIER S GUIDE 11

13 BASE ANGLED END DISPLAY UNITS 568 DEEP With angled shelves 280 Lt Hd 2600 Rt Hd 2608 BASE ANGLED DISPLAY PENINSULAR UNITS 280 DEEP With angled shelves NOTE: 600MM WIDE, DESIGNED TO FIT ADJACENT TO A BASE UNIT WITH A BACK PANEL FIXING KIT 6012 AND PENINSULAR BACK PANEL 9036/7 (SEE PAGE 8) BASE SQUARE END DISPLAY UNITS 568 DEEP With square shelves 280 Lt Hd 2759 Rt Hd 2760 BASE SQUARE DISPLAY PENINSULAR UNITS 280 DEEP With square shelves NOTE: 600MM WIDE, DESIGNED TO FIT ADJACENT TO A BASE UNIT WITH A BACK PANEL FIXING KIT 6012 AND PENINSULAR BACK PANEL 9036/7 (SEE PAGE 8) MATERIAL FEATURE UNIT: BASE SQUARE DISPLAY END UNITS 568 DEEP 320 Lt Hd 2797 Rt Hd 2798 MADE FROM 28MM MFC FEATURE UNIT: BASE SQUARE DISPLAY PENINSULAR UNITS 300 DEEP NOTE: MADE FROM 28MM MFC 640MM WIDE, DESIGNED TO FIT ADJACENT TO A BASE UNIT WITH A BACK PANEL FIXING KIT 6012 AND PENINSULAR BACK PANEL MANHATTAN SPECIFIER S GUIDE

14 BASE WINE RACK UNIT 316 DEEP NOTE: CARCASE DEPTH ON THESE UNITS IS ONLY 316MM. NOTE: WHEN SPECIFYING AT THE END OF THE RUN OR ADJACENT TO STANDARD DEPTH BASE UNITS, A DECOR PANEL WILL NEED TO BE SPECIFI FEATURE BASE WINE RACK UNIT 316 DEEP With chrome bottle supports NOTE: CARCASE DEPTH ON THESE UNITS IS ONLY 316MM. NOTE: WHEN SPECIFYING AT THE END OF THE RUN OR ADJACENT TO STANDARD DEPTH BASE UNITS, A DECOR PANEL WILL NEED TO BE SPECIFIED. BASE GULLWING UNITS 568 DEEP With fullheight doors 715mm high 330 Lt Hd 2639 Rt Lh 2638 BASE OVEN HOUSING UNITS 568 DEEP To suit an integrated oven Aperture height 600mm Infill height 116mm NOTE: TOP RAIL TO BE REMOVED ON SITE. To suit an integrated oven unit, with plinth drawer under Aperture height 600mm 1 X Drawer front, height 116mm NOTE: TOP RAIL TO BE REMOVED ON SITE. BASE MICROWAVE HOUSING UNIT 568 DEEP To suit an integrated microwave NOTE: THE MICROWAVE MAKE AND MODEL MUST BE SPECIFIED SO THAT EITHER A PAN DRAWER OR INFILL CAN BE MANUFACTURED TO SUIT. MANHATTAN SPECIFIER S GUIDE 13

15 BASE UNIT INTEGRATED APPLIANCE CONVERSION KIT HEIGHT NOTE: USED TO CONVERT A FREESTANDING APPLIANCE SPACE OF 620MM TO AN INTEGRATED SPACE OF 600MM. NOTE: STANDARD S FRAME FRONT STRIP OF 50MM IS REPLACED WITH THIS SPECIAL FRONT STRIP OF 70MM ON SITE. BASE UNIT INFILL PANELS 720 HIGH Panel height 720mm NOTE: TO BE ASSEMBLED AND CUT DOWN ONSITE TO SUIT THE REQUIRED. NOTE: MINIMUM IS 16MM. BASE TRAY SPACE 568 DEEP NOTE: SUPPLIED 300MM WIDE, TO BE CUT DOWN ONSITE TO REQUIRED. NOTE: MINIMUM IS 100MM. EXTRA DEEP BASE UNIT END PANELS TO SUIT UNITS USING 650mm DEEP WORKTOPS HAND How to order the extra deep end panels: LH 6331 RH 6332 Left Hand Right Hand 1: Order the base or tall unit that needs an extra deep end as a standard unit code. Then add SJC A5666 so the extra deep end can be added to the correct unit on the order 2: Order the extra deep end panel to suit that unit, using the new codes. Then add SJC A5666 so the extra deep end can be added to the order. 3: The extra deep end panel will then be fitted to the required unit on site by one of our fitters EXTRA DEEP TALL UNIT END PANELS TO SUIT UNITS USING 650mm DEEP WORKTOPS HEIGHT UNITS USING 2120mm 2300mm EXTRA DEEP PLINTH RETURNS TO SUIT UNITS USING 650mm DEEP WORKTOPS HEIGHT MANHATTAN SPECIFIER S GUIDE

16 HIGHBOARD LARDER / BROOM UNITS 1400MM HIGH 568 DEEP Unit height 1400mm Carcase height 1250mm Door height Lt Hd 2809 Rt Hd Lt Hd 2811 Rt Hd Lt Hd 2813 Rt Hd Lt Hd 2815 Rt Hd 2816 HIGHBOARD HOUSING UNITS 1400MM HIGH 568 DEEP To suit an integrated single oven Unit height 1400mm Carcase height 1250mm Aperture 590mm Infill panel to suit Door height 570mm 600 Lt Hd 4801 Rt Hd 4802 To suit an integrated double oven Unit height 1400mm Carcase height 1250mm Aperture 876mm Infill panel to suit Drawer height 283mm To suit a refrigerator and/or freezer Unit height 1400mm Carcase height 1250mm Aperture 1217mm Door height 1245mm 600 Lt Hd 4815 Rt Hd 4816 HIGHBOARD UNIT INFILL PANELS 1250 HIGH Panel height 1250mm NOTE: TO BE ASSEMBLED AND CUT DOWN ONSITE TO SUIT THE REQUIRED. NOTE: MINIMUM IS 16MM. TALL BROOM UNITS 2120 high 2300 high Unit height 2120mm Carcase height 1970mm Top door height 1245mm Bottom door height 715mm or Unit height 2300mm Carcase height 2150mm Top door height 1245mm Bottom door height 895mm 2120 HIGH 2300 HIGH 300 Lt Hd 3643 Lt Hd 3683 Rt Hd 3644 Rt Hd Lt Hd 3645 Lt Hd 3685 Rt Hd 3646 Rt Hd Lt Hd 3647 Lt Hd 3687 Rt Hd 3648 Rt Hd Lt Hd 3649 Lt Hd 3689 Rt Hd 3650 Rt Hd 3690 MANHATTAN SPECIFIER S GUIDE 15

17 SPECIFICATION OF APPLIANCES TO SUIT A HOUSING UNIT Manhattan can supply both highboard and tall housing units to accommodate a wide selection of built in ovens, refrigerators, freezers, microwaves and combinations. The appliance manufacturer and model must be specified when ordering to enable us to prepare exact sizes and if necessary, detail special units to suit individual requirements. Where the appliance height is less than the aperture size, an infill panel is fitted. All appliances must be fitted strictly in accordance with the manufacturer s instructions. Please check the manufacturer s appliance instructions with regard to specific ventilation requirements: it may be necessary to notch the plinth locally. TALL HOUSING UNITS To suit a single oven 2120 high 2300 high Unit height 2120mm Carcase height 1970mm Top door height 570mm Infill panel to suit Aperture 664mm Bottom door height 715mm or Unit height 2300mm Carcase height 2150mm Top door height 715mm Infill panel to suit Aperture 699mm Bottom door height 715mm DEPTH 2120 HIGH 2300 HIGH Lt Hd 4621 Lt Hd 4651 Rt Hd 4622 Rt Hd 4652 To suit a single oven and microwave with short base door 2120 high 2300 high To suit a single oven and microwave with pan drawers Unit height 2120mm Carcase height 1970mm Top door height 355mm Infill panel to suit Aperture 1030mm Bottom door height 570mm or Unit height 2300mm Carcase height 2150mm Top door height 450mm Infill panel to suit Aperture 1115mm Bottom door height 570mm Lt Hd 4647 Lt Hd 4649 Rt Hd 4648 Rt Hd high 2300 high To suit a double oven with short base door 2120 high 2300 high Unit height 2120mm Carcase height 1970mm Top door height 355mm Infill panel to suit Aperture 1030mm Bottom pan drawers 2 X height 283mm or Unit height 2300mm Carcase height 2150mm Top door height 450mm Infill panel to suit Aperture 1115mm Bottom pan drawers 2 X height 283mm Unit height 2120mm Carcase height 1970mm Top door height 450mm Infill panel to suit Aperture 932mm Bottom door height 570mm or Unit height 2300mm Carcase height 2150mm Top door height 570mm Infill panel to suit Aperture 989mm Bottom door height 570mm Lt Hd 4671 Lt Hd 4673 Rt Hd 4672 Rt Hd MANHATTAN SPECIFIER S GUIDE

18 TALL HOUSING UNITS CONTINUED To suit a double oven with pan drawers 2120 high 2300 high Unit height 2120mm Carcase height 1970mm Top door height 450mm Infill panel to suit Aperture 932mm Bottom pan drawers 2 X height 283mm or Unit height 2300mm Carcase height 2150mm Top door height 570mm Infill panel to suit Aperture 989mm Bottom pan drawers 2 X height 283mm DEPTH 2120 HIGH 2300 HIGH Lt Hd 4659 Lt Hd 4661 Rt Hd 4660 Rt Hd 4662 To suit a double oven and microwave with pan drawer high 2300 high To suit a refrigerator and/or freezer 2120 high 2300 high Unit height 2120mm Carcase height 1970mm Top door height 355mm Infill panel to suit Aperture 1311mm Bottom pan drawers 1 X height 283mm or Unit height 2300mm Carcase height 2150mm Top door height 450mm Infill panel to suit Aperture 1396mm Bottom pan drawers 1 X height 283mm Unit height 2120mm Carcase height 1970mm Top door height 1245mm Bottom door height 715mm Aperture 1937mm or Unit height 2300mm Carcase height 2150mm Top door height 1245mm Bottom door height 895mm Aperture 2117mm Lt Hd 4645 Lt Hd 4655 Rt Hd 4646 Rt Hd 4656 NOTE: DOOR ORIENTATION WILL VARY DEPENDING ON THE APPLIANCE THAT HAS BEEN SPECIFIED. TALL PULLOUT LARDER UNITS DEPTH 2120 HIGH 2300 HIGH Unit height 2120mm Carcase height 1970mm Top door height 1245mm Bottom door height 715mm or Unit height 2300mm Carcase height 2150mm Top door height 1245mm Bottom door height 895mm 2120 high 2300 high MANHATTAN SPECIFIER S GUIDE 17

19 TALL HOUSING UNITS with UPGRADED TOP DOOR STAY DEPTH 2120 HIGH 2300 HIGH To suit a single oven and microwave with short base door 2120 high 2300 high To suit a single oven and microwave with pan drawers Unit height 2120mm Carcase height 1970mm Top door height 355mm Infill panel to suit Aperture 1030mm Bottom door height 570mm or Unit height 2300mm Carcase height 2150mm Top door height 450mm Infill panel to suit Aperture 1115mm Bottom door height 570mm Lt Hd 4683 Lt Hd 4685 Rt Hd 4684 Rt Hd high 2300 high Unit height 2120mm Carcase height 1970mm Top door height 355mm Infill panel to suit Aperture 1030mm Bottom pan drawers 2 X height 283mm or Unit height 2300mm Carcase height 2150mm Top door height 450mm Infill panel to suit Aperture 1115mm Bottom pan drawers 2 X height 283mm To suit a double oven and microwave with pan drawer high 2300 high To suit a double oven with pan drawers Unit height 2120mm Carcase height 1970mm Top door height 355mm Infill panel to suit Aperture 1311mm Bottom pan drawers 1 X height 283mm or Unit height 2300mm Carcase height 2150mm Top door height 450mm Infill panel to suit Aperture 1396mm Bottom pan drawers 1 X height 283mm Unit height 2120mm Carcase height 1970mm Top door height 450mm Infill panel to suit Aperture 932mm Bottom pan drawers 2 X height 283mm Lt Hd 4687 Rt Hd high 18 MANHATTAN SPECIFIER S GUIDE

20 TALL HOUSING UNITS with UPGRADED TOP DOOR STAY CONTINUED To suit a double oven with short base door Unit height 2120mm Carcase height 1970mm Top door height 450mm Infill panel to suit Aperture 932mm Bottom door height 570mm DEPTH 2120 HIGH Lt Hd 4677 Rt Hd high DISPLAY WINE RACKS 2120 HIGH 2300 HIGH high 2300 high NOTE: CARCASE DEPTH ON THESE UNITS IS ONLY 316MM. NOTE: WHEN SPECIFYING AT THE END OF THE RUN OR ADJACENT TO STANDARD DEPTH BASE UNITS, A DECOR PANEL WILL NEED TO BE SPECIFIED. TALL UNIT INFILL PANELS 2120 HIGH 2300 HIGH NOTE: TO BE ASSEMBLED AND CUT DOWN ONSITE TO SUIT THE REQUIRED. NOTE: MINIMUM IS 16MM. NOTE: 1970MM HIGH INFILL PANEL TO BE USED WITH 2120MM HIGH TALL UNITS. NOTE: 2150MM HIGH INFILL PANEL TO BE USED WITH 2300MM HIGH TALL UNITS. TALL UNIT SHELVES NOTE: SHELVES MANUFACTURED FROM 16MM MELAMINE FACED CHIPBOARD, LIPPED WITH 0.6MM PVC EDGING. COLOUR DECIDED BY RANGE CHOICES. NOTE: SUPPLIED AS A PAIR WITH SHELF CLIPS. NOTE: SHELF ANNOTATED IS NOMINAL TO SUIT UNITS. TALL UNIT CORNER FILLETS FOR OVENS SET AT 45 DEGREES To suit a tall unit set at 45 degrees 1970 HIGH 2150 HIGH NOTE: FOR USE WITH A 600MM TALL UNIT SET AGAINST A 45 DEGREE FALSE WALL WITH ADJACENT TALL UNITS. NOTE: 1970MM CORNER INFILL TO BE USED WITH 2120MM HIGH TALL UNITS. NOTE: 2150MM CORNER INFILL TO BE USED WITH 2300MM HIGH TALL UNITS. To suit a tall oven housing set at 45 degrees NOTE: FOR USE WITH A 600MM TALL OVEN HOUSING SET AGAINST A 45 DEGREE FALSE WALL WITH ADJACENT TALL UNITS. THIS PREVENTS THE OVEN HANDLE CLASHING WITH ADJACENT DOORS. NOTE: 1970MM CORNER INFILL TO BE USED WITH 2120MM HIGH TALL UNITS. NOTE: 2150MM CORNER INFILL TO BE USED WITH 2300MM HIGH TALL UNITS. MANHATTAN SPECIFIER S GUIDE 19

21 WALL UNITS 360 HIGH With fullheight, liftup door NOTE: ON 800MM AND 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DOORS ATTACHED TO EACH OTHER SIDE BY SIDE. NOTE: ON 800MM AND 1000MM WIDE UNITS THERE WILL BE AN INTERNAL SUPPORT RAIL BETWEEN THE TOP AND BOTTOM OF THE UNIT.WALL UNITS WALL UNITS with UPGRADE TOP DOOR STAY 360 HIGH With fullheight, liftup door NOTE: ON 800MM AND 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DOORS ATTACHED TO EACH OTHER SIDE BY SIDE. NOTE: ON 800MM AND 1000MM WIDE UNITS THERE WILL BE AN INTERNAL SUPPORT RAIL BETWEEN THE TOP AND BOTTOM OF THE UNIT.WALL UNITS WALL UNITS 575mm HIGHWith fullheight door 575 DEEP 575 high 575 high WALL UNITS With fullheight door 720 high 900 high 300 Lt Hd 8539 Rt Hd Lt Hd 8541 Rt Hd Lt Hd 8551 Rt Hd Lt Hd 8543 Rt Hd Lt Hd 8545 Rt Hd HIGH 900 HI 300 Lt Hd 8791 Lt Hd 8901 Rt Hd 8792 Rt Hd Lt Hd 8711 Lt Hd 8911 Rt Hd 8712 Rt Hd Lt Hd 8837 N/A Rt Hd 8838 N/A 500 Lt Hd 8721 Lt Hd 8921 Rt Hd 8722 Rt Hd Lt Hd 8741 Lt Hd 8941 Rt Hd 8742 Rt Hd N/A high 900 high WALL UNITS DUAL HANDED With fullheight, dualhanded doors 720 HIGH 900 HIGH 800 Lt Hd 8803 Lt Hd 8813 Rt Hd 8804 Rt Hd Lt Hd 8811 N/A Rt Hd 8812 N/A 1000 Lt Hd 8805 Lt Hd 8815 Rt Hd 8806 Rt Hd high 900 high NOTE: IDEALLY USED ADJACENT TO A COOKER HOOD TO PREVENT DOOR CLASHES, OR INTO A CORNER ALSO TO PREVENT DOOR CLASHES. 20 MANHATTAN SPECIFIER S GUIDE

22 WALL BOILER HOUSING UNITS With fullheight door DEPTH 720 HIGH 900 HIGH Lt Hd 8795 Lt Hd 8895 Rt Hd 8796 Rt Hd Lt Hd 8797 Lt Hd 8897 Rt Hd 8798 Rt Hd high 900 high With fullheight door Lt Hd 8765 Lt Hd 8965 Rt Hd 8766 Rt Hd Lt Hd 8761 Lt Hd 8961 Rt Hd 8762 Rt Hd high 900 high WALL BOILER HOUSING DRESSER UNITS With fullheight door DEPTH 1212 HIGH 1392 HIGH Lt Hd 8883 Lt Hd 8887 Rt Hd 8884 Rt Hd high 1392 high NOTE: VENTILATION GRILLS ARE FITTED ON OPPOSITE SIDE TO THE HINGES. IT IS IMPORTANT THEREFORE THAT THESE ARE NOT COVERED BY ANY OTHER UNITS. NOTE: THE DRAWER IS ATTACHED TO THE CARCASE AND IS A NONWORKING DRAWER. WALL MICROWAVE HOUSING UNIT To suit 316mm deep wall units 720 HIGH 900 HIGH high 900 high NOTE: THE MICROWAVE MANUFACTURER AND MODEL NUMBER MUST BE SPECIFIED SO THAT THE INFILL CAN BE MANUFACTURED TO SUIT. WALL MICROWAVE HOUSING UNIT with UPGRADED TOP DOOR STAY To suit 316mm deep wall units 720 HIGH 900 HIGH high 900 high NOTE: THE MICROWAVE MANUFACTURER AND MODEL NUMBER MUST BE SPECIFIED SO THAT THE INFILL CAN BE MANUFACTURED TO SUIT. MANHATTAN SPECIFIER S GUIDE 21

23 WALL CORNER UNITS With fullheight door 600mm carcase width DOOR 720 HIGH 900 HIGH 300 Lt Hd 8793 Lt Hd 8801 (min 3678) Rt Hd 8794 Rt Hd high 900 high With fullheight door 600mm carcase width 400 Lt Hd 8821 Lt Hd 8861 (min ) Rt Hd 8822 Rt Hd Lt Hd 8823 N/A (min ) Rt Hd 8824 N/A 500 Lt Hd 8825 Lt Hd 8865 (min ) Rt Hd 8826 Rt Hd high 900 high With fullheight door 800mm carcase width 500 Lt Hd 8827 Lt Hd 8867 (min 3678) Rt Hd 8828 Rt Hd Lt Hd 8829 Lt Hd 8869 (min ) Rt Hd 8830 Rt Hd high 900 high With fullheight door 900mm carcase width 600 Lt Hd 8831 Lt Hd 8871 (min 3678) Rt Hd 8832 Rt Hd high 900 high WALL CORNER UNIT 575mm HIGH With fullheight door 600mm carcase width DOOR 575 HIGH Lt Hd 8549 (min 3678) Rt Hd 8550 UNITS 575 high WALL CORNER ANGLED UNITS With fullheight door 720 HIGH 900 HIGH 618 Lt Hd 8775 Lt Hd 8975 Rt Hd 8776 Rt Hd high 900 high NOTE: FILLETS MUST BE SPECIFIED SEPARATELY TO SUIT MODULAR REQUIREMENTS WHEN USED IN THE MIDDLE OF A RUN (SEE BELOW) NOTE: WHEN USED AT THE END OF A RUN A DECOR PANEL MUST BE SPECIFIED (S 8018/8068 FOR 16MM MFC, OR 8257/8258 FOR 28MM MFC). WALL CORNER ANGLED UNIT FILLETS 720 HIGH 900 HIGH NOTE: FILLETS SUPPLIED AS A PAIR. NOTE: FILLETS MUST BE SPECIFIED WHEN USING WALL ANGLED CORNER UNITS (8775, 8776, 8795 AND 8796) IN THE MIDDLE OF A RUN; THIS IS TO ENSURE BASE AND WALL UNIT ALIGNMENT FOR PLANNING REQUIREMENTS (SEE ABOVE). 22 MANHATTAN SPECIFIER S GUIDE

24 WALL CORNER L SHAPED UNITS With fullheight door 720 HIGH 900 HIGH N/A 720 high WALL DISPLAY ANGLED CORNER UNITS 720 HIGH 900 HIGH high 900 high WALL DISPLAY ANGLED UNIT FILLETS 720 HIGH 900 HIGH W NOTE: FILLETS SUPPLIED AS A PAIR. NOTE: FOR USE WITH A 600MM OVEN HOUSING AND 6211 FILLETS (SEE PAGE 9) SET AGAINST A 45 DEGREE FALSE WALL WITH A 600MM COOKER HOOD AND WALL DISPLAY ANGLED CORNER UNITS 8713/8913 (SEE PAGE 22). WALL DISPLAY UNITS With fullheight door 360 HIGH 492 HIGH N/A N/A high 492 high WALL DISPLAY UNITS 720 HIGH 900 HIGH high 900 high MANHATTAN SPECIFIER S GUIDE 23

25 WALL DISPLAY END UNITS With angled shelves 720 HIGH 900 HIGH 280 Lt Hd 8705 Lt Hd 8905 Rt Hd 8700 Rt Hd high 900 high With square shelves 280 Lt Hd 8779 Lt Hd 8979 Rt Hd 8780 Rt Hd 8980 FEATURE 720 high UNIT: WALL DISPLAY 900 high END UNITS FEATURE UNIT: WALL DISPLAY END UNITS 720 HIGH 900 HIGH 320 Lt Hd 8799 N/A Rt Hd 8800 N/A NOTE: NOT AVAILABLE TO SUIT 900MM HIGH WALL UNITS. THIS UNIT IS MADE FROM 28MM MFC FEATURE UNIT: WALL DISPLAY PLATE RACK UNIT 720 HIGH 900 HIGH 720 HIGH 900 HIGH N/A N/A Chrome plate supports WALL WINE RACK To suit 316mm deep wall units 720 HIGH 900 HIGH high 900 high 24 MANHATTAN SPECIFIER S GUIDE

26 WALL DISPLAY GLAZED UNITS With fullheight door 720 HIGH 900 HIGH 400 Lt Hd 8719 N/A Rt Hd 8720 N/A 500 Lt Hd 8723 Lt Hd 8923 Rt Hd 8724 Rt Hd Lt Hd 8743 N/A Rt Hd 8744 N/A 720 high 900 high NOTE: THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE CHOICES. With fullheight doors N/A high 900 high NOTE: THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE CHOICES. WALL DISPLAY GLAZED DRESSER UNITS With integral drawer 1212 HIGH 1392 HIGH 500 Lt Hd 8993 Lt Hd 8989 Rt Hd 8992 Rt Hd high 1392 high NOTE: THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: 1212MM DRESSER UNITS TO SUIT 720MM HIGH WALL UNITS, 1392MM DRESSER UNITS TO SUIT 900MM HIGH WALL UNITS, WALL DRESSER UNIT WORKTOP FILLET SIZE TO SUIT 500 & 600MM 6091 TO SUIT 1000MM 6093 NOTE: TO SUIT WALL DISPLAY DRESSER UNIT WHEN USING 2830MM THICK SOLID SURFACE WORKTOPS. NOTE: 6091 TO SUIT BOTH 500 AND 600MM WIDE UNITS. NOTE: 6093 TO SUIT 1000MM WIDE UNITS. WALL DISPLAY ALUMINIUM FRAMED GLAZED UNITS With fullheight door 360 HIGH wide NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM D HANDLE. WALL DISPLAY ALUMINIUM FRAMED GLAZED UNITS 720 high 900 high 720 HIGH 900 HIGH 400 Lt Hd 8853 N/A Rt Hd 8854 N/A 500 Lt Hd 8847 N/A Rt Hd 8848 N/A 600 Lt Hd 8855 N/A Rt Hd 8856 N/A N/A N/A NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM D HANDLE. NOTE: 800 AND 1000MM UNITS ARE SUPPLIED WITH DOUBLE DOORS. MANHATTAN SPECIFIER S GUIDE 25

27 WALL DISPLAY DRESSER TAMBOUR UNITS 1212 HIGH 1392 HIGH N/A N/A 1212 high NOTE: WHEN USING WITH 28/30MM SOLID SURFACES, YOU WILL NEED TO SPECIFY AN INFILL PANEL THE OF THE UNIT X 339MM DEEP X 10MM THICK. THIS IS TO ALLOW ALIGNMENT OF THE WALL, WALL DRESSER AND TALL UNITS. WALL DISPLAY BIFOLDING UNITS 720 HIGH With solid doors 2 X Doors, height 355mm high NOTE: WHEN USING VERTICAL BIFOLDING UNITS, AVOID THE USE OF CORNICE LIGHTING AS THESE MAY STRIKE WHEN THE DOOR IS FULLY OPENED. With aluminium frame glazed doors 2 X Aluminium framed doors, height 355mm high NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM D HANDLE. NOTE: WHEN USING VERTICAL BIFOLDING UNITS, AVOID THE USE OF CORNICE LIGHTING AS THESE MAY STRIKE WHEN THE DOOR IS FULLY OPENED. With solid and aluminium frame glazed doors 1 X Top door, height 355mm 1 X Aluminium framed bottom door, height 355mm high NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM D HANDLE. NOTE: WHEN USING VERTICAL BIFOLDING UNITS, AVOID THE USE OF CORNICE LIGHTING AS THESE MAY STRIKE WHEN THE DOOR IS FULLY OPENED. NOTE: THE ALUMINIUM FRAME GLAZED DOOR IS ALWAYS SUPPLIED AT THE BOTTOM OF THE UNIT, BELOW THE SOLID DOOR. WALL UNIT GLASS SHELVES To suit 316mm deep wall units Optional extra 400 GLAS070B 500 GLAS071A 600 GLAS072A 800 GLAS073A 900 GLAS069A 1000 GLAS074A NOTE: SUPPLIED WITH GLASS SHELF CLIPS. NOTE: SHELF ANNOTATED IS NOMINAL TO SUIT UNITS. NOTE: 800 AND 1000MM WALL DISPLAY BIFOLDING UNITS CANNOT BE UPGRADED TO HAVE INTERNAL GLASS SHELVING. 26 MANHATTAN SPECIFIER S GUIDE

28 INTEGRATED EXTRACTOR HOOD 450 HIGH 600 CH700 NOTE: 450MM HIGH TO SUIT 720MM WALL UNITS. NOTE: WHEN USING 900MM WALL UNITS, AN INTEGRATED EXTRACTOR HOOD INFILL PANEL MUST BE SPECIFIED (SEE BELOW). INTEGRATED EXTRACTOR HOOD INFILL PANEL 175 HIGH NOTE: 175MM INFILL TO BE USED IN CONJUNCTION WITH INTEGRATED EXTRACTOR HOOD TO SUIT 900MM WALL UNITS. TELESCOPIC COOKER HOOD 720 HIGH 900 HIGH 600 Lt Hd 8164 N/A Rt Hd 8165 N/A N/A 600 wide 900 wide NOTE: THESE COOKER HOODS CAN NOT BE USED WITH GAS HOBS AS IT WILL BREACH CORGI REGULATIONS AND BS6172. ELECTRIC, CERAMIC AND INDUCTION HOBS ARE FINE. NOTE: DESIGNED TO SUIT NEFF TELESCOPIC SENSOR HOODS MODELS D4692, 4672 & D4972 ONLY, NOTE: WHEN SPECIFYING MODEL D4972 FOR INSTALLATION INTO THE 900 WIDE HOOD UNIT, YOU WILL NEED TO SPECIFY THE INSTALLATION KIT Z5420X0, AS THIS HOOD IS DESIGNED TO BE FITTED INTO A 600WIDE UNIT WITHOUT THE KIT OR 900 WIDE UNITS WITH THE KIT. NOTE: INTERNAL WALL UNIT SHELVING IS REDUCED DEPTH TO ALLOW FOR EXTRACTOR MECHANISM; BEST SUITED FOR USE WITH SMALL SPICE JARS, ETC. WALL SOIL & VENT PIPE INFILL SPICE RACK 720 HIGH 900 HIGH N/A 720 high NOTE: TO BE ASSEMBLED AND CUT DOWN ONSITE TO REQUIRED. WALL CORNER POST 720 HIGH 900 HIGH 636 X NOTE: A CORNER POST IS FITTED BETWEEN TWO ADJACENT UNITS WHERE A VOID SPACE IS CREATED IN THE CORNER. MANHATTAN SPECIFIER S GUIDE 27

29 WALL UNIT INFILL PANELS 720 HIGH 900 HIGH high 900 high NOTE: TO BE ASSEMBLED AND CUT DOWN ONSITE TO REQUIRED. NOTE: MINIMUM IS 16MM. WALL DRESSER UNIT INFILL PANELS 1212 HIGH 1392 HIGH high 1392 high NOTE: TO BE ASSEMBLED AND CUT DOWN ONSITE TO REQUIRED. NOTE: MINIMUM IS 16MM. WINDOW SOFFITS Without pelmet 16mm soffit panel 720 HIGH 900 HIGH DEPTH NOTE: SUPPLIED READY TO BE CUT TO SIZE ONSITE. FEATURE UNIT: 28mm WINDOW SOFFIT PANELS DEPTH NOTE: SUPPLIED READY TO BE CUT TO SIZE ONSITE. CHIMNEY HOOD SOFFITS FOR USE WITH CORNICE DEPTH DEPTH 316 to to mm soffit panel with Angled front edges NOTE: SUPPLIED READY TO BE CUT TO SIZE ONSITE NOTE: SOFIT LENGTH 850MM TO SUIT 600 TO 800 WIDE HOOD SPACES NOTE: SOFIT LENGTH 1250MM TO SUIT 900 TO 1200 WIDE HOOD SPACES. CHIMNEY HOOD SOFFITS FOR USE WITHOUT CORNICE DEPTH 316 to to mm soffit panel with a curved front edge NOTE: SUPPLIED READY TO BE CUT TO SIZE ONSITE NOTE: SOFIT LENGTH 850MM TO SUIT 600 TO 800 WIDE HOOD SPACES NOTE: SOFIT LENGTH 1250MM TO SUIT 900 TO 1200 WIDE HOOD SPACES. 28 MANHATTAN SPECIFIER S GUIDE

30 STAINLESS STEEL PILASTERS HEIGHT SIZE X100 FACM232A X100 FACM233A X100 FACM234A Manufactured from 50 x 100mm tubing. VERTICAL BASE PILASTER UNIT DECOR PANEL (Available in all Price Groups) HEIGHT 16mm PANEL 28mm PANEL N/A Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: PANEL SIZE: D 568 X W 16 VERTICAL BASE FORWARD PILASTER DECOR PANEL (Available in all Price Groups) HEIGHT 16mm PANEL 28mm PANEL N/A Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: PANEL SIZE: D 216 X W 16 VERTICAL BASE PENINSULAR PILASTER DECOR PANEL (Available in all Price Groups) HEIGHT 16mm PANEL 28mm PANEL N/A Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: PANEL SIZE: D 600 X W 16 MANHATTAN SPECIFIER S GUIDE 29

31 VERTICAL BASE UNIT DECOR PANEL (Available in all Price Groups) HEIGHT DEPTH 16mm PANEL 28mm PANEL Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: PANEL DEPTH: D 591 NOTE: PANEL DEPTH: D 641 TO SUIT 650 DEEP WORKTOPS VERTICAL BASE INFILL DECOR PANEL (Available in all Price Groups) HEIGHT 16mm PANEL 28mm PANEL Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: PANEL DEPTH: D 150 VERTICAL BASE PENINSULAR UNIT DECOR PANEL (Available in all Price Groups) HEIGHT 16mm PANEL 28mm PANEL Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: PANEL DEPTH: D 646 VERTICAL HIGHBOARD UNIT DECOR PANEL (Available in all Price Groups) HEIGHT 16mm PANEL 28mm PANEL Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: PANEL DEPTH: D 591 VERTICAL TALL UNIT DECOR PANEL (Available in all Price Groups) HEIGHT DEPTH 16mm PANEL 28mm PANEL Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. FOR 2120mm TALL UNITS FOR 2300mm TALL UNITS NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: FOR 16MM THICK SELECT, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2150MM HIGH, AND FOR 2300MM ARE PROVIDED 2330MM HIGH. NOTE: FOR 28MM THICK METRO RANGES, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2179MM HIGH, AND FOR 2300MM ARE PROVIDED 2359MM. NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: FOR 16MM THICK SELECT TRADITIONAL RANGES, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2120MM HIGH AND FOR 2300MM ARE PROVIDED 2300MM HIGH. FOR ALL OTHER SELECT RANGES, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2120MM HIGH AND FOR 2300MM ARE PROVIDED 2300MM HIGH. NOTE: FOR 28MM THICK METRO RANGES, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2179MM HIGH, AND FOR 2300MM ARE PROVIDED 2359MM. NOTE: PANEL DEPTHS 641MM ARE PROVIDED FOR 650 SINK RUNS. 30 MANHATTAN SPECIFIER S GUIDE

32 VERTICAL WALL UNIT DECOR PANEL 360mm WALL UNITS (Available in all Price Groups) HEIGHT 16mm PANEL 28mm PANEL Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. FOR 360mm WALL UNITS NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: FOR 16MM THICK SELECT TRADITIONAL RANGES, PANELS FOR 360MM WALL UNITS ARE PROVIDED 400MM HIGH. FOR ALL OTHER SELECT RANGES, PANELS FOR 360MM WALL UNITS ARE PROVIDED 360MM HIGH NOTE: FOR 28MM THICK METRO RANGES, PANELS FOR 360MM WALL UNITS ARE PROVIDED 418MM HIGH. NOTE: PANEL DEPTH: D 339 VERTICAL WALL UNIT DECOR PANEL 720/900mm WALL UNITS (Available in all Price Groups) HEIGHT 16mm PANEL 28mm PANEL Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. FOR 720mm WALL UNITS FOR 900mm WALL UNITS NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: FOR 16MM THICK SELECT TRADITIONAL RANGES, PANELS FOR 720MM WALL UNITS ARE PROVIDED 760MM HIGH AND FOR 900MM ARE PROVIDED 940MM HIGH. FOR ALL OTHER SELECT RANGES, PANELS FOR 720MM WALL UNITS ARE PROVIDED 720MM HIGH AND FOR 900MM ARE PROVIDED 900MM HIGH NOTE: FOR 28MM THICK METRO RANGES, PANELS FOR 720MM WALL UNITS ARE PROVIDED 778MM HIGH, AND FOR 900MM ARE PROVIDED 958MM HIGH. NOTE: PANEL DEPTH: D 339 VERTICAL WALL PENINSULAR UNIT DECOR PANEL 720/900mm WALL UNITS (Available in all Price Groups) HEIGHT 16mm PANEL 28mm PANEL Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. FOR 720mm WALL UNITS FOR 900mm WALL UNITS NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: FOR 16MM THICK SELECT TRADITIONAL RANGES, PANELS FOR 720MM WALL UNITS ARE PROVIDED 760MM HIGH AND FOR 900MM ARE PROVIDED 940MM HIGH. FOR ALL OTHER SELECT RANGES, PANELS FOR 720MM WALL UNITS ARE PROVIDED 720MM HIGH AND FOR 900MM ARE PROVIDED 900MM HIGH NOTE: FOR 28MM THICK METRO RANGES, PANELS FOR 720MM WALL UNITS ARE PROVIDED 778MM HIGH, AND FOR 900MM ARE PROVIDED 958MM HIGH. NOTE: PANEL DEPTH: D 362 VERTICAL WALL DRESSER UNIT DECOR PANEL (Available in all Price Groups) HEIGHT 16mm PANEL 28mm PANEL Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. FOR 1212mm DRESSER UNITS FOR 1392mm DRESSER UNITS NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES. NOTE: FOR 16MM THICK SELECT TRADITIONAL RANGES, PANELS FOR 1212MM DRESSER UNITS ARE PROVIDED 1212MM HIGH AND FOR 1392MM ARE PROVIDED 1392MM HIGH. FOR ALL OTHER SELECT RANGES, PANELS FOR 1212MM DRESSER UNITS ARE PROVIDED 1212MM HIGH AND FOR 1392MM ARE PROVIDED 1392MM HIGH NOTE: FOR 28MM THICK METRO RANGES, PANELS FOR 1212MM DRESSER UNITS ARE PROVIDED 1241MM HIGH, AND FOR 1392MM ARE PROVIDED 1421MM HIGH. NOTE: PANEL DEPTH: D 339 MANHATTAN SPECIFIER S GUIDE 31

33 VERTICAL VARIABLE SIZE DECOR PANEL (Available in all Price Groups) HEIGHT 16mm PANEL 28mm PANEL VARIABLE Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. NOTE: MAXIMUM BOARD SIZE = 2300 X 1200MM, WITH THE GRAIN FOLLOWING THE LONGEST LENGTH. NOTE: LENGTH, HEIGHT AND GRAIN DIRECTION MUST BE SPECIFIED WHEN ORDERING. HORIZONTAL VARIABLE SIZE FRAMING PANEL (Available in all Price Groups) DEPTH LENGTH 16mm PANEL 28mm PANEL Decor panel style. Decor Panels are Range Dependent; They are manufactured from either MFC panels, Foil Wrapped panels all with a PVC edge. VARIABLE VARIABLE NOTE: MAXIMUM BOARD SIZE = 2300 X 1200MM, WITH THE GRAIN FOLLOWING THE LONGEST LENGTH. NOTE: LENGTH, HEIGHT AND GRAIN DIRECTION MUST BE SPECIFIED WHEN ORDERING. DECOR PANEL SELFADHESIVE COVER CAPS COLOUR COLOUR SelfAdhesive PVC cover caps: For use when fitting Decor Panels to units, or to cover the cam in the Wall Unit bottom panel. WHITE PLAS267A VANILLA PLAS265A ALUMINIUM PLAS270A GREY OAK PLAS269A BEECH PLAS266A MAPLE PLAS262A NATURAL AIDIA PLAS268A WALNUT FERRARA OAK PLAS261A PROTECTION PACKS S 6900 PROTECTION PACK 12 METRES OF BUBBLE WRAP 750 WIDE 12 METRES OF CORRUGATED CARDBOARD 2 POLY BAGS NOTE: IDEALLY TO BE FITTED EITHER SIDE F 6901 PROTECTION PACK 12 METRES OF BUBBLE WRAP 750 WIDE 12 METRES OF CORRUGATED CARDBOARD 20 LENGTHS OF PROPLEX / CORREX 600 X 1200 X 2mm 10 LENGTHS OF NOMAFOAM UCHANNEL 2 POLY BAGS 6902 PROTECTION PACK 12 METRES OF BUBBLE WRAP 750 WIDE 20 LENGTHS OF PROPLEX / CORREX 600 X 1200 X 2mm 10 LENGTHS OF NOMAFOAM UCHANNEL 2 POLY BAGS 32 MANHATTAN SPECIFIER S GUIDE

34 enable enable: inclusively designed accessible kitchens: we believe it is the first range of its kind to equally meet the needs of house builders, housing associations and end users. Why enable?......because it means: to make something possible or to provide somebody with the resources, authority or the opportunity to do something. enable offers you flexible height cupboards; internal storage systems for added functionality; multi hole brackets allowing simple worktop level adjustment; internal cupboard/drawer lighting for the visually impaired. enable offers you accessible kitchens to meet all your needs. The Manhattan enable range is the result of a consolidated research and development programme carried out by our product development team in West Sussex. Our research showed that kitchens designed for optimum accessibility should: offer a wide rang of choice, accommodating the design philosophy adopted in standard kitchen ranges; give a high degree of flexibility, ensuring the physical needs of different users are catered for equally; have excellent functionality, without sacrificing style; meet the specified standards for special needs users. MANHATTAN SPECIFIER S GUIDE 33

35 ENABLE: INTRODUCTION Welcome to Manhattan s enable range of units, our most comprehensive to date. This new range of units will be able to offer you plenty of exciting solutions when planning your kitchens. And remember, this is just the selection of specialist units, everything you have seen so far in this comprehensive Specifier s Guide can be used in your kitchens. enable: inclusively designed accessible kitchens ENABLE: BASE UNITS REDUCED HEIGHT 568 DEEP With fullheight door With fullheight door Carcase height 575mm Door height 570mm Carcase height 575mm Door height 570mm 300 Lt Hd 2151 Rt Hd Lt Hd 2153 Rt Hd Lt Hd 4911 Rt Hd Lt Hd 4913 Rt Hd ENABLE: Single drawer unit BASE DRAWER UNIT WITH METALSIDED THREEQUARTER OPENING DRAWER Carcase height 145mm 450mm deep drawer, finished in white 1 X Drawer front, height 140mm 568 DEEP ENABLE: BASE DRAWER UNITS WITH METALSIDED DRAWERS (CONTINUED) Three drawer unit comprising two drawers and one highsided drawer Carcase height 575mm 450mm deep drawer, finished in white 2 X Drawer fronts, height 140mm 1 X Deep drawer fronts, height 283mm Four drawer unit comprising four drawers Carcase height 575mm 450mm deep drawer, finished in white 4 X Drawer fronts, height 140mm ENABLE: BASE DRAWER UNIT WITH PULLOUT TABLE SURFACE AND METALSIDED DRAWERS Three drawer unit top drawer as pullout tambour table/surface Carcase height 575mm 450mm deep drawer, finished in white 1 X Pullout drawer front with table, height 140mm 1 X Drawer front, height 140mm 1 X Deep drawer front, height 283mm 34 MANHATTAN SPECIFIER S GUIDE

36 ENABLE: BASE CORNER UNITS REDUCED HEIGHT With fullheight door 600mm WIDE UNIT (300mm Wide door) 800mm WIDE UNIT (400mm Wide door) Carcase height 575mm Door height 570mm 1000mm WIDE UNIT (500mm Wide door) 600 Lt Hd 2185 (min ) Rt Hd Lt Hd 2187 (min ) Rt Hd Lt Hd 2189 (min ) Rt Hd 2190 *800 Lt Hd 2191 (min ) Rt Hd 2192 *1000 Lt Hd 2193 (min ) Rt Hd 2194 * *800mm WIDE UNIT (500mm Wide door) NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL. BASE DRAWER UNIT RED ENABLE: *1000mm WIDE UNIT (600mm Wide door) KITCHEN ACCESSORY HALF CIRCLE, FULL EXTENSION CAROUSELS SIZE Carousels for use in corner units 000 X 000 MECH100A NOTE: CAROUSEL TRAYS SUPPLIED AS A SINGLE ITEM, IT IS RECOMMENDED THAT YOU SUPPLY TWO CAROUSELS PER BASE CORNER UNIT. NOTE: CAROUSEL TRAYS WILL ONLY SUIT 1000MM BASE CORNER UNITS, WITH A DOOR SIZE OF 500MM. ENABLE: KITCHEN ACCESSORY PELMET LENGTH Worktop blanking pelmet 140 MAX NOTE: TO BE SPECIFIED WHERE A RUN OF WORKTOP IS BEING USED TO ALLOW DISABLED ACCESS TO SINK OR HOB AREA. THE PELMET WILL ALLOW THE WORKTOP SUPPORT BRACKETS TO BE HIDDEN FROM THE VIEW OF THE USER. ENABLE: KITCHEN ACCESSORY CORNER UNIT BLANKING PANEL Base corner unit blanking panel SIZE 568 DEEP 678 X X NOTE: WHEN USING THE BLANKING PANEL, REMEMBER TO REMOVE THE SFRAME AND FILLET TO ENSURE THAT THE KITCHEN IS PLANNED ON A 600MM CORNER MODULE. NOTE: PANEL TO BE CUTONSITE TO SUIT BASE CORNER UNIT ADJUSTMENT. NOTE: REGARDLESS OF DOOR COLOUR, THIS PANEL WILL BE MANUFACTURED TO SUIT THE CARCASE COLOUR OF THE UNITS ORDERED. MANHATTAN SPECIFIER S GUIDE 35

37 ENABLE: MOBILE TROLLEY UNIT Mobile trolley unit with cutlery drawer and locking castor s H HEIGHT 2150 ENABLE: HIGHBOARD HOUSING UNITS 1400MM HIGH 568 DEEP To suit an integrated single oven Unit height 1400mm Carcase height 1250mm Open shelf, variable depending on oven size Aperture 650mm Bottom pan drawer height 355mm To suit an integrated double oven Unit height 1400mm Carcase height 1250mm Infill panel to suit (fitted at top of unit) Aperture 889mm Bottom pan drawer height 283mm To suit an integrated refrigerator or freezer Unit height 1400mm Carcase height 1250mm Aperture 889mm Door height 895mm Infill panel 57mm Bottom pan drawer height 283mm (Any infill to be fitted internally behind door) 600 Lt Hd 4813 Rt Hd MANHATTAN SPECIFIER S GUIDE

38 ENABLE: TALL HOUSING UNITS 568 DEEP To suit a single oven Unit height 2120mm Carcase height 1970mm Top, liftup door 355mm Open shelf, variable depending on oven size Aperture 650mm Bottom pan drawer height 355mm To suit a single oven and microwave Unit height 2120mm Carcase height 1970mm Top, liftup door 355mm Infill panel to suit Top aperture 450mm Bottom aperture 650mm Bottom pan drawer height 355mm To suit a double oven Unit height 2120mm Carcase height 1970mm Top, liftup door 355mm Open shelf, variable depending on oven size Aperture 884mm Bottom pan drawer height 355mm To suit an integrated refrigerator or freezer Unit height 2120mm Carcase height 1970mm Top, liftup door 355mm Open shelf 335mm Door height 895mm Bottom pan drawer height 283mm (Any infill to be fitted internally behind door) 600 Lt Hd 3753 Rt Hd 3754 MANHATTAN SPECIFIER S GUIDE 37

39 ENABLE: TALL HOUSING UNITS with UPGRADED TOP DOOR STAY 568 DEEP To suit a single oven Unit height 2120mm Carcase height 1970mm Top, liftup door 355mm Open shelf, variable depending on oven size Aperture 650mm Bottom pan drawer height 355mm To suit a single oven and microwave Unit height 2120mm Carcase height 1970mm Top, liftup door 355mm Infill panel to suit Top aperture 450mm Bottom aperture 650mm Bottom pan drawer height 355mm To suit a double oven Unit height 2120mm Carcase height 1970mm Top, liftup door 355mm Open shelf, variable depending on oven size Aperture 884mm Bottom pan drawer height 355mm To suit an integrated refrigerator or freezer Unit height 2120mm Carcase height 1970mm Top, liftup door 355mm Open shelf 335mm Door height 895mm Bottom pan drawer height 283mm (Any infill to be fitted internally behind door) 600 Lt Hd 3763 Rt Hd MANHATTAN SPECIFIER S GUIDE

40 ENABLE: WALL UNIT 720 HIGH With fullheight door 720 high With fullheight doors 300 Lt Hd 8523 Rt Hd Lt Hd 8525 Rt Hd Lt Hd 8527 Rt Hd Lt Hd 8529 Rt Hd Lt Hd 8531 Rt Hd high MANHATTAN SPECIFIER S GUIDE 39

41 ENABLE: KITCHEN ACCESSORY WORKTOP SUPPORT ARM SIZE Support arm for use under a span of worktop, with no units under 500 X 410 MECH101A WORKTOP WORKTOP WALL FIXING BRACKET & SUPPORT ARM WALL FIXING BRACKET & SUPPORT ARM WALL WALL FLOOR LEVEL FLOOR LEVEL NOTE: SUPPLY TWO BRACKETS FOR WORKTOP SPANS UP TO 600MM WIDE, AND THREE BRACKETS FOR WORKTOP SPANS OVER 1200MM WIDE. NOTE: MINIMUM WORKTOP HEIGHT OF 695MM (TO UNDERSIDE); BRACKET ADJUSTABLE IN HEIGHT IN 25MM INCREMENTS TO MAXIMUM OF 870MM (TO UNDERSIDE). ENABLE: KITCHEN ACCESSORY BASE UNIT SUPPORT ARM SIZE Support arm for use under enable base units, with worktop over 500 X 410 MECH102A WALL WORKTOP UNIT WALL WORKTOP UNIT WALL FIXING BRACKET & SUPPORT ARM WALL FIXING BRACKET & SUPPORT ARM FLOOR LEVEL FLOOR LEVEL NOTE: SUPPLY TWO BRACKETS FOR UNITS UP TO 600MM WIDE, AND THREE BRACKETS FOR UNITS 800MM AND OVER. NOTE: MINIMUM WORKTOP HEIGHT OF 745MM (TO UNDERSIDE); BRACKET ADJUSTABLE IN HEIGHT IN 25MM INCREMENTS TO MAXIMUM OF 1070MM (TO UNDERSIDE). ENABLE: KITCHEN ACCESSORY POWER LIFT WORKTOP MECHANISM SIZE Electronic worktop movement mechanism, used for manoeuvring sink/hob surfaces 1000 X 600 MECH069A POWER WORKTOP TRANSFORMER ANTIENTRAPMENT STRIP PELMET SWITCH ELECTRONIC CONTROL MECH071A GUIDE RAIL POWER LIFT WALL FIXING BRACKET MOTOR NOTE: WHEN BASE UNITS ARE FITTED AT A LOWER HEIGHT NEXT TO A POWERED LIFT, AN ANTIENTRAPMENT SENSOR SWITCH MUST BE FITTED TO THE UNDERSIDE OF THE WORKTOP S METAL SUPPORT FRAME. NOTE: WORKTOPS FITTED NEXT TO THE POWER LIFT MUST FINISH FLUSH WITH THE UNIT END PANEL OR FLY END PANEL. NOTE: TO REACH ANY ADJACENT BASE UNITS, THE LENGTH OF CABLES/WIRES WILL NEED TO HAVE THE LENGTH SPECIFIED. NOTE: REMEMBER TO SPECIFY THE ANTIENTRAPMENT STRIP MECH071A (SEE RIGHT) 40 MANHATTAN SPECIFIER S GUIDE

42 ACCESSORIES MANHATTAN SPECIFIER S GUIDE 41

43 CORNICEStyle, material and finish specific to individual range. HALF SWINGOUT WIRE BASKETS Style, material and finish specific to individual range. 2.3 meters 6061 For use in a base corner units 2663/ /28 & 2189/90 only. MECH001A NOTE: SUPPLIED AS A PAIR. Range M11 & R07 only LIGHT FASCIA BREAKFAST BAR LEGS 895MM HIGH Style, material and finish specific to individual range. 2.3 meters mm x 25mm diameter chrome plated steel tube with sockets. Chrome LEGS036A Range M11 & R07 only CONTINUOUS PLINTH 150MM HIGH BREAKFAST BAR LEGS 870MM HIGH Colour specific to individual range, supplied in 2.5m lengths Optional extra, manufactured from MFC, supplied in 2.5m lengths Optional extra, manufactured from MFC,supplied in 2.5m lengths RETURN PLINTH 175MM HIGH Range specific 6094 Aluminium effect 6083 White High Gloss 6087 BREAKFAST BAR LEGS 710MM HIGH 870mm x 60mm diameter, adjustable height leg. White LEGS032A S/Steel LEGS035A Oak LEGS031A PLINTH SEALER Colour specific to individual range. Optional extra, manufactured from MFC. Optional extra, manufactured from MFC. Range specific 6095 Aluminium effect 6085 White High Gloss 6088 STAINLESS STEEL PILASTERS 710mm x 60mm diameter, adjustable height leg. White LEGS030A S/Steel LEGS034A Oak LEGS033A Transparent plastic extrusion which clips to the bottom edge of the plinth. The flexible lip then seals the gap between the floor and the plinth. NOTE: SUPPLIED IN 3M LENGTHS, CUT ON SITE TO SUIT REQUIREMENTS. PLAS250A Manufactured from 50 x 100mm tubing. 870mm FACM232A 720mm FACM233A 900mm FACM234A PLINTH AND WORKTOP VENTILATION GRILLS To be fitted into a housing unit plinth or fitted into a worktop over a highboard housing unit. NOTE: * MANUFACTURED FROM PLASTIC. NOTE: ** MANUFACTURED FROM ALUMINIUM, AND THEN SPRAYED THE APPROPRIATE COLOUR. *White FACM060A **Silver FACM082B **Gold FACM083A **White FACM084A DECOR PANEL SELFADHESIVE COVER CAPS WHITE VANILLA ALUMINIUM GREY OAK BEECH MAPLE NATURAL AIDIA WALNUT FERRARA OAK PLAS267A PLAS265A PLAS270A PLAS269A PLAS266A PLAS262A PLAS268A PLAS261A 8 mm THICK WORKTOP UPSTANDS For positioning directly above the worktop The size 100mm high x 3000mm MAX long MANHATTAN SPECIFIER S GUIDE

44 TIMBER BATTENS CABLE MANAGMENT FOR LIGHTING CABLE TIE 50 x 50 x 2400mm timber batten for supporting 650mm deep of Granite worktops. 20 x 50 x 2400mm timber batten for supporting worktops over appliance spaces, soffit panels or infill panels. 50x50x2400 TIMB020A 20x50x2400 TIMB021A. To be used in conjunction with Self Adhesive bases FITT090A SINGLE POSTFORMED WORKTOPS 38MM HINGE OPTION TWO 38mm & 60mm Single postformed laminate worktop Depth up to 600mm Depth mm deg NOTE: 3.6M MAXIMUM LENGTH DOUBLE POSTFORMED WORKTOPS 38MM HINGE OPTION THREE NOTE: 3.6M MAXIMUM LENGTH Depth 670mm Depth 900mm deg 2MM ACRYLIC EDGED WORKTOPS 2mm Acrylic edged laminate worktop, acrylic edging available in: Aluminium Wave Beech multiplex Beech/Steel multiplex Walnut/Steel multiplex Planked Cherry Depth up to 850mm HINGE OPTION FOUR 107 deg Soft Close NOTE: 3.6M MAXIMUM LENGTH SQUARE EDGED WORKTOPS HINGE OPTION FIVE 38mm Square edged laminate worktop NOTE: 3.0M MAXIMUM LENGTH Depth up to 850mm deg Soft Close WORKTOP CONNECTOR BOLTS SOFT CLOSING DOORS UPGRAGE OPTIONAvailable with to suit Each joint consists of a three butterfly bolts to be recessed into the worktop FACM009A Available with to suit all base, wall, highboard and tall units as an optional upgrade HING064A NOTE: NOT SUITABLE FOR BIFOLD WALL UNITS OR WITH 170 DEGREE HINGES CABLE MANAGMENT FOR LIGHTING SELF ADHESIVE BASE To be used in conjunction with cable ties. FITT091A SOFT CLOSING DRAWERS UPGRAGE OPTION DRAWER UNITS WITH TWINWALLED, FULL EXTENSION Available as un upgrade option to all base and tall units MECH126A NOTE: THIS COMES AS STANDARD ON THE FULL EXTENSION DRAWERS DETAILED ABOVE MANHATTAN SPECIFIER S GUIDE 43

45

46 BATHROOM SPECIFIER S GUIDE JUNE 2009 By appointment to Her Majesty The Queen Manufacturers and Installers of Kitchen and Bathroom Furniture Manhattan Furniture West Sussex