Sliding Door Fittings, Roller Shutters Vertical Sliding Door Fittings
|
|
- Eustace Kennedy
- 5 years ago
- Views:
Transcription
1 Vertico 16 VF, door weight up to 15 kg, for 2 bi-parting doors Door height: mm Door thickness: Min. 16 mm Side panel thickness: Min. 1 mm Running gear: Top and bottom running, 4 rollers, with ball bearing mounted, plastic sleeved rollers Counterweight: The bottom door is the counterweight for the top door, both doors must therefore weigh the same Door stop: Top and bottom stoppers for press fitting into the single running track Installation dimensions Running gear Cord guide Door stop Single running track Cord tensioner Cover profile installation Cord holder Cord Screw-in dowel FF.94
2 Running gear installation Door height H mm H1 mm H2 mm Top door Bottom door Set Cat. No. For door heights of mm For door heights of mm For door heights of mm Packing: 1 set Order reference Please order running track and cover profile separately. Tracks and individual components Material Finish Length mm Cat. No. Single running track, for press fitting into the groove in the carcase front and screw fixing with countersunk chipboard screws Ø4 mm Aluminium Silver coloured 2, Cover profile, for covering the single running track, to clip on Aluminium Silver coloured 2, FF.95
3 Vertico 30 VF, door weight up to 20 kg Door heights: 20 1,200 mm Door thickness: Min. 16 mm Side panel thickness: Min. 1 mm Running gear: Top running, 4 rollers, with ball bearing mounted, plastic sleeved rollers Counterweight: Counterweight must correspond to door weight Door stop: Top and bottom stoppers for press fitting into the single running track Installation dimensions Cover plate, top, with cord guide Top door stop Cord Cover cap for counterweight box Glide profile Running gear Counterweight box Counterweight Door stop positioning Top door stop Mounting jig Cord suspending position Single running track Cover profile Lower cover plate Cover profile Sealing piece for running track and cover profile Bottom door stop Screw-in dowel FF.96
4 Running gear installation Calculating total weight of door If using extremely large or heavy door handles please take the weight of the door handle into consideration when calculating the total weight. Weight of door + Weight of running gears = kg + Weight of door handle = Total weight of door Weight of door = Width m x Height m x Weight kg/m 2 In the following table the weights are shown in kg/m 2 for chipboard material. Door height H mm H1 mm H2 mm ,000 1,200 1, Door thickness mm Weight kg/m Total weight of door max. 10 kg Weight of both running gears Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs Door height mm Weight of both running gears kg ,000 1, FF.97
5 Total weight of door max. 15 kg Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs Total weight of door max. 20 kg Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs Set Cat. No. For door heights of mm For door heights of mm For door heights of mm For door heights of mm For door heights of mm For door heights of mm For door heights of mm For door heights of 1,000 1,200 mm Packing: 1 set Order reference Please order running track, cover profile, counterweight box, counterweights and glide profile separately. FF.9
6 Tracks and individual components Material Finish Length mm Cat. No. Single running track, for press fitting into the groove in the carcase front and screw fixing with countersunk chipboard screws Ø4.0 mm Aluminium Silver coloured 2, Cover profile, for covering the single running track, to clip on Aluminium Silver coloured 2, Counterweight box, for press fitting into the single running track Max. door weight kg Material Finish Packing Cat. No. 10 Aluminium Silver coloured 550 mm mm ,000 mm Glide profile. for press fitting into counterweight box _ Plastic Transparent 3,000 mm g counterweight, for placing into counterweight box _ Lead Bright 1 or 10 pcs g counterweight, for placing into counterweight box _ Lead Bright 1 or 10 pcs Installation The length of the counterweight box is designed for the maximum door weight (10, 15 and 20 kg). A space is left in the upper area of the box when it is filled to the maximum capacity. This space allows fine adjustments to be made, i.e. weights can be removed or added. If the maximum door weight is less than the specified maximum weight, the box can also be shortened. Please note that a space of at least 70 mm is needed to make fine adjustments. FF.99
7 Vertico 16 VF SW, door weight up to 15 kg, for 2 bi-parting doors Door heights: mm Glass thickness: 4 mm Side panel thickness: Min. 1 mm Running gear: Top and bottom running, 4 rollers, with ball bearing mounted, plastic sleeved rollers Counterweight: The bottom door is the counterweight for the top door, both doors must therefore weigh the same Door stop: Top and bottom stoppers for press fitting into the single running track Installation dimensions Cord guide Running gear Door stop Cord tensioner Cord holder Mounting plate Aluminium frame mounting Stop seal profile Frame fixing bracket Cord Frame fixing bracket Mounting plate Glass retaining profile Aluminium frame profile Slide glass retaining profile into aluminium frame profile Shorten profile to mitre of 45 Cover cap Single running track Cover cap mounting Single running track Cover profile Cover profile installation FF.100
8 Installation of running gear Door height H mm H1 mm H2 mm Top door Bottom door Set Cat. No. For 2 doors, door heights of mm For 2 doors, door heights of mm For 2 doors, door heights of mm Packing: 1 set Order reference Please order running track, cover profile, aluminium frame profile, glass retaining profile and stop seal profile separately. Tracks and individual components Material Finish Length mm Cat. No. Single running track, for press fitting into the groove in the carcase front and screw fixing with countersunk chipboard screws Ø4.0 mm Aluminium Silver coloured 2, Cover profile, for covering the single running track, to clip on Aluminium Silver coloured 2, Aluminium frame profile, for screwing to frame fixing bracket Glass retaining profile, used for stabilising and as clatter prevention for the fitted pane of glass, for inserting into the aluminium frame profile Aluminium Silver coloured 2, Plastic Transparent 3, Stop seal profile, for inserting into aluminium frame profile Plastic Transparent 3, FF.101
9 Vertico 20 VF, door weight up to 20 kg Door heights: 20 1,200 mm Glass thickness: 4 mm Side panel thickness: Min. 1 mm Running gear: Top running, 4 rollers, with ball bearing mounted, plastic sleeved rollers Counterweight: Counterweight must correspond to door weight Door stop: Top and bottom stoppers for press fitting into the single running track Installation dimensions Aluminium frame construction Frame fixing bracket Mounting plate Glass retaining profile Aluminium frame profile Door stop positioning Top door stop Mounting jig Cord suspending position Cover profile Sealing piece for running track and cover profile A Cover plate, top, with cord guide B Top door stop C Cord D Cover cap for counterweight box E Glide profile F Running gear G Counterweight box H Counterweight I Single running track J Cover profile K Lower cover plate L Bottom door stop M Mounting plate FF.102
10 Total weight of door max. 10 kg Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs Installation of running gear Weight of both running gears Door height mm Weight of both running gears kg ,000 1, Calculating total weight of door If using extremely large or heavy door handles please take the weight of the door handle into consideration when calculating the total weight. Weight of glass door + Weight of running gears + Weight of aluminium frame + weight of fixing material for aluminium frame profile + Weight of door handle = Total weight of door Weight of glass Weight of door = Width m x Height m x Weight kg/m 2 (4 mm glass) Weight of aluminium frame Weight = 2 x (door width + door height) x 0.57 kg Weight of fixing material for aluminium frame profile Weight = 0.15 kg Door height H mm H1 mm H2 mm ,000 1,200 1, FF.103
11 Total weight of door max. 15 kg Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs Total weight of door max. 20 kg Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs Set Cat. No. For door heights of mm For door heights of mm For door heights of mm For door heights of mm For door heights of mm For door heights of mm For door heights of mm For door heights of 1,000 1,200 mm Packing: 1 set Order reference Please order running track, cover profile, frame profile, glass retaining profile, counterweight box, counterweights, and glide profile separately. FF.104
12 Tracks and individual components Material Finish Length mm Cat. No. Single running track, for press fitting into the groove in the carcase front and screw fixing with countersunk chipboard screws Ø4.0 mm Aluminium Silver coloured 2, Cover profile, for covering the single running track, to clip on Aluminium Silver coloured 2, Aluminium frame profile, for screwing to frame fixing bracket Aluminium Silver coloured 2, Glass retaining profile, used for stabilising and as clatter prevention for the fitted pane of glass, for inserting into the aluminium frame profile Plastic Transparent 3, Additional components Counterweight box, for press fitting into single running track Glide profile, for press fitting into counterweight box Max. door weight kg Material Finish Packing Cat. No. 10 Aluminium Silver coloured 550 mm mm ,000 mm _ Plastic Transparent 3,000 mm g counterweight, for placing into counterweight box _ Lead Bright 1 or 10 pcs g counterweight, for placing into counterweight box _ Lead Bright 1 or 10 pcs Installation The length of the counterweight box is designed for the maximum door weight (10, 15 and 20 kg). A space is left in the upper area of the box when it is filled to the maximum capacity. This space allows fine adjustments to be made, i.e. weights can be removed or added. If the maximum door weight is less than the specified maximum weight, the box can also be shortened. Please note that a space of at least 70 mm is needed to make fine adjustments. FF.105
Sliding Door Fittings, Roller Shutters Folding Sliding Door Fittings
Silent Fold 20/A, door weight up to 20 kg Area of application: For folding doors mounted to the carcase on one side, without running and guide track, for opening and closing the folding doors without blocking
More informationSliding Door Fittings Contents
Contents Furniture Solutions Information Timber Door Fittings Glass Door Fittings Frame Door Fittings Accessories Folding Sliding Door Fittings Vertical Sliding Door Fittings Architectural Solutions Information
More informationSliding Door Fittings, Roller Shutters
Sliding Door Fittings, Roller Shutters Contents Sliding Timber Door Fittings Finetta Flatfront Foldfront Mobilus Classic Sliding door system Automatic sliding door system Planomix Planofit Straightening
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationHinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
More informationSliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings
Ultra 20 Swing Door fitting, door weight up to 20 kg Area of application: Door swings out to the front and to the side when being opened, allowing unlimited access to the cabinet interior, can be used
More informationCONTENTS. Sliding Door Fittings Information. Sliding door fittings from Häfele. Sliding door application for Classic 40-J/80-J/120-J
Information CONTENTS Sliding door fittings from Häfele...3 Soft and self closing systems from Häfele...4 Sliding door fitting Classic 40-P/80-P/120-P SLIDO... Sliding door fitting Classic 40-P/80-P/120-P
More informationHinges and Flap Fittings Application Matrix
Application Matrix Model Opening angle Application Page Soft close Opening Integrated Optional With handle Without handle Screws Without tools Duomatic Concealed hinges Premium 110 Standard.11 / / / /
More informationRoller blind systems. Model 590H Roller blind power operated metal mechanism 590H. Interior shading
Interior shading Roller blind systems Model 590H Roller blind power operated metal mechanism 590H Roller blind systems with side chain or power mechanism. Optima roller blind shading systems are a particularly
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationHinges and Flap Fittings
Hinges and Flap Fittings Contents Concealed Hinges Duomatic Premium Concealed hinge Duomatic Concealed hinge Metallamat Concealed hinge Metalla Concealed hinge Push Latch for push to open hinge Metalla
More informationFolding and sliding door systems
Folding and sliding door systems Folding door systems Information Folding doors combining the advantages of classical revolving doors with the practical functioning and elegance of sliding doors. They
More informationHinges and Flap Fittings
Hinges and Flap Fittings We offers a wide range of options the term is functionality and quality. Contents Concealed Hinges DUOMATIC Concealed hinge DUOMATIC PUSH Concealed hinge PUSH Door opening system
More informationSliding Door Fittings For wooden doors
Sliding Door Fittings For wooden doors Infront EKU clipo 10 S-IF For door weight up to 10 kg The single top running track can be installed by Screw fixing into groove or Clamping into groove with swivel
More informationUS FUTABA ESTABLISHED 1983 NEW IN THIS SECTION OFFICE LINE. Short Type 4 5-1/8" ( mm) 23.5 Ø /4" 45 mm. 1-3/16" 30 mm 5/8" 15.
0 5 1-3/4" 1-3/16" 30 5/8" 15.8 15 ESTABLISHED 1983 31/64" 1 Ø 100 Ø + 1/" 1" 1/8" NEW IN THIS SECTION " Short Type 4 5-1/8" (100 130 ) Ø =, & 80 11 13 0 Ø 6 Extra Heavy Duty Adjustable Floor Leveler (Page
More informationHAWA-JUNIOR 80 XINNIX POCKET SLIDING DOOR SYSTEM
SLIDING DOOR FITTINGS DIRECTORY / APRIL 2014 POCKET SLIDING INTERIOR DOOR SYSTEMS HAWA-JUNIOR 80 XINNIX POCKET SLIDING DOOR SYSTEM High quality straight sliding door gear for residential or commercial
More informationRoller runner systems FR
Roller runner systems FR Technik für Möbel 191 Roller runner system FR 30 with one-sided captive guide rail for screw-on assembly 5 runner lengths 300-500 mm Finish: white Load capacity 55 lbs K.C.M.A.
More informationmechanics Features Technical specification Ordering information Dimensioned drawings Aluminium profiles made by isel
Panel profiles PP profiles For fast and easy erection of frames, benches and racks luminium, naturally anodised easy, very strong under load Top edge particularly suitable as a load-bearing cladding, also
More informationStorage Fittings 1 º q µ ³ ³ Â É 1.1
1.0 Storage Fittings 1 1.1 1 ARENA Plus anti-slip finish welcome to the quiet kitchen Kesseböhmer developed the special ARENA Plus coating which prevents pots and pans, crockery and groceries slipping
More informationTHEATER CURTAIN TRACK SYSTEMS
THEATER CURTAIN TRACK SYSTEMS Theater curtain track systems T 200 KOMBI profile T 300 OMEGA profile Application area: For horizontally moving heavy curtains For backdrops For fly systems For sliding doors
More informationHS-PORTAL 200 LM Lift and sliding hardware for aluminium doors Hardware information for profile manufacturer
HS-PORTAL 200 LM Lift and sliding hardware for aluminium doors Hardware information for profile manufacturer... with the following benefits: with integrated night vent profile cylinder accessories secure
More informationStirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More informationVersion C > (recommended max. width) Version D > (recommended max. width) Version E
Classic 40-L to 120-L Sliding door fitting from Area of application: For 1-leaf and 2-leaf sliding doors : Tempered safety glass For glass thickness: Tempered safety glass: 8 and 10 Adjustment facility:
More informationPart-No. Article / Version Supply A Tilt foot bar of ABS, off-white RAL 9002 A
*Mounting angle ( ) on the adapter serves as a support to locate the case in the right position. After attachment of the adapter, the mounting angles can be easily removed. Tilt foot bar, Case feet TILT
More informationSilent Gliss. Roller Blind Systems
Roller Blind Systems 2 Chain Operated Roller Blind System Product Information Small, chain operated roller blind system for residential applications. Silent and smooth operation with metal bead chain.
More informationShindaiwa Illustrated Parts List. 488 EC1 Chainsaw. CYLINDER / muffler... 2
Shindaiwa Illustrated Parts List 488 EC1 Chainsaw CYLINDER / muffler... 2 Crankcase... 3 CYLINDER Cover / Handles / Fuel Filter...4-5 Clutch / Oil Pump / Chain Cover...6-7 Piston / Crankshaft... 8 Rotor
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationMini amateur football ground goals, street hockey goals, mobile, fully welded
Fully welded Mini amateur football ground goals, street hockey goals, mobile, fully welded GS-APPROVED Completely made of aluminium Extremely robust and low risk of injury Goal frame square profile 80
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationDoor Hinges Concealed Hinges
Concealed mortise hinge For installation in wall recesses For flush wooden or metal doors Suitable for DIN left hand and DIN right hand Certified for fire resistant and smoke control doors in compliance
More informationBAVONA TP6500 HARDTOP
VON HRTOP eschreibung escription min. 200 cm max. 600 cm 0 min. 200 cm max. 600 cm Terrace pavilions comprising a continuous cubic frame (extruded aluminium profile dimension 230 x mm) and a lamella canopy.
More informationHS-PORTAL 300 LM Lift and slide hardware for aluminium doors Hardware information for profile manufacturers
HS-PORTAL 300 LM Lift and slide hardware for aluminium doors Hardware information for profile manufacturers... with the following benefits: with integrated night vent profile cylinder accessories secure
More informationSteel drawer system with wide appeal: MultiTech
Steel drawer system with wide appeal: MultiTech Suary Range suary 4-5 Assembly aids 23-25 Technical information Planning dimensions 26-30 / 36-39 Assembly / adjustment / removal 31-35 Quality criteria
More informationScale 1:1 Weight: 460 grammes per meter Aluminium extrusion Dimension: 28 mm
forestgroup.com PRODUCT INFORMATION Elegant and trendy channel rod system; Easy and quick to assemble; Available colours: Bronze, Inox, Antique Bronze, Gold, Chrome and Black; CRS and MRS components can
More informationFor maximum performance when removing glass and in the automotive workshop: FEIN SuperCut Automotive.
For maximum performance when removing glass and in the automotive workshop: FEIN SuperCut Automotive. As one of the world s most successful power tools for removing rigidly bonded panes of auto glass,
More informationSLIDING DOORS SYSTEMS
SLIDING DOORS SYSTEMS COPLANAR SYSTEM FOR CABINET REVERSIBLE SYSTEM Load capacity up to 25kg for one door tested by Catas. Door thickness up to 40mm. Soft closing and soft opening. Cuttable in every customized
More informationJunior /GP
Patents Hardware system with patch suspension for elegant all-glass sliding doors (ESG/VSG) weighing up to 40, 80, 120 and 160 kg (88, 176, 264 and 352 lbs.). Inset profile system HAWA-Adapto 80-120 see
More informationEnglish 1/2015. The Profi le System
English 1/2015 The Profi le System MayTec System Technology The key to success! Solutions with Innovative Profi le The Profi le System Curved Profi les The Clean-Room System The Telescopic System The Linear
More information4.1. Programme overview Group 4. Top-running, flush sliding-door fitting InLine P
i Programme overview Group 4 Top-running, flush sliding-door fitting InLine P 4. - 4.9 Top-running sliding-door fitting TopLine with Easys 4.10-4.17 Top-running sliding-door fitting TopLine 35 4.18-4.5
More informationThe universal sliding door system for all furniture segments. SlideLine
The universal sliding door system for all furniture segments. SlideLine On-trend sliding door applications made easy SlideLine Sliding doors are becoming increasingly popular for furniture throughout
More informationSIMPLE SLEEK & ELEGANT
SIMPLE SLEEK & ELEGANT 69 OZ-SL-44-A1 OZ-SL-44-A1-W Roller Assembly Four fiber reinforced plastic rollers of 30mm diameter glass holding point Height adjustable glass holding points (10mm) Secure grip
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E944 ELECTRIC TOOL PARTS LIST COMPOUND MITER SAW Model 2005 10 5 (E1) 73 1 14 1 2 3 4 5 6 7 11 8 9 10 30 30 12 13 17 18 12 14 31 19 15 16 32 33 20 21 22 23 34 35 A 24 25 26 38
More informationAluminium. Tensile frame. Alu-snap frames & supports. Leaflet dispenser. Aluminium
Tensile frame Alu-snap frames & supports Leaflet dispenser 119 TENSILE FRAME TENSILE FRAME NEW! Tensile frame Special lightweight frame made of anodised aluminium rods Ø 9 mm, round plastic corners grey
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E943 ELECTRIC TOOL PARTS LIST COMPOUND MITER SAW Model 2005 10 5 (E1) 83 1 14 1 2 3 4 5 6 7 11 8 9 10 39 39 12 13 19 20 12 14 40 21 15 16 41 42 22 23 24 25 17 18 43 44 37 38 A
More informationSUPRA Active-Wheelchair for kids & adolescents Spare parts catalogue
SUPRA Active-Wheelchair for kids & adolescents Spare parts catalogue GB - Partnering together to mobilise kids Model identification When ordering spare parts, please always indicate the following basic
More informationApplications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches
FEET PA 00.0 076/ 0 - PA, grey - Anti-skid insert NBR - All bolts are suitable for all plates Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E942 ELECTRIC TOOL PARTS LIST SLIDE COMPOUND MITER SAW Model 2005 5 20 (E1) 1 2 3 60 61 62 63 64 19 20 21 A 65 47 48 45 49 50 51 6 17 37 46 38 44 23 24 22 25 24 A 26 27 39 28 40
More informationKitchen Fittings Waste Bins
Single waste bin, capacity 1 litres Carcase width: Min. 400 mm Version: For left and right hand use Installation: Screw fixing to side panel Steel housing plastic coated white, plastic bin light grey,
More informationLocks and Catches Information
Information SYMO 3000 is the worldwide unique furniture locking system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum expenditure and effort. The
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E938 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 10 1 (E1) 80 1 15 7 8 9 16 17 18 1 2 3 19 4 20 5 12 6 13 14 13 15 21 11 10 39 40 41 42 43 44 45 46 47 31 38 32 22 33 23 34
More informationCord Operated Curtain Track Systems
Cord Operated Curtain Track Systems Application Chart Specification Weight Range Applications Single Stack Pair Stack Multiple Stack Asymetric Profile Profile Number Dimensions in mm Gliding Channel (mm)
More informationSlido Classic 80-N & Smuso Soft Close
Slido Classic 80-N & Smuso Soft Close sliding door solutions from Häfele Slido Sliding Door Fittings Slido - Sliding door fittings from Häfele Häfele supplies sliding doors for any application under the
More information9.3 Fittings for wardrobe interiors 9.3.0
9.3 Fittings for wardrobe interiors 9.3.0 Interior fittings for wardrobes 9.3 Fittings for wardrobe interiors Interior fittings for wardrobes 9.3.1 Range summary 9.3 Fittings for wardrobe interiors i Rota
More informationRA 320 IBC Battery. As at: 01/15/10 Time:17:04
Battery As at: 01/15/10 Time:17:04 Battery As at: 01/15/10 Time:17:04 Pos. Description Reference 01 Covering of battery 320.265 02 Battery 320.091 03 P...484 WA 04 P...485 PA 05 Battery container 320.261
More informationFunction: Used to connect profiles at adjustable angles. Features: 1. Adjustable angles. Item Description For Screw Weight (g) Colour Finish Material
4.56 Swivel Fastener (SWF): Function: Used to connect profiles at adjustable angles. 1. Adjustable angles. SWF 1.25.0132.0 8 M6x S3.60 M6 S3.61 M6x S3.60 Item Description For Screw Weight (g) Colour Finish
More informationrailing system for cantilevered glass balustrades
content railing system cp-1400......................................... 12 railing system cp-1402......................................... 14 accessoires for system cp-1400 und cp-1402.......................
More informationSLIDING DOOR AND WINDOW SYSTEM WITH THERMAL BREAK
SLIDING DOOR AND WINDOW SYSTEM WITH THERMAL BREAK Е70 WINDOW AND DOOR SYSTEM WITH THERMAL BREAK TABLE OF CONTENTS GENERAL INFORMATION page 9 BUILDING PHYSICS page 17 TABLES page 25 PROFILES page 31
More informationTECHNOLOGY IN MOTION MACO MULTI-MATIC TILT AND TURN FITTINGS. Installation instructions PVC WINDOWS
TECHNOLOGY IN MOTION TILT AND TURN FITTINGS Installation instructions PVC WINDOWS Note on the surfacefinish fittings are electrogalvanised, passivated and sealed with wax. We guarantee that the surfacefinish
More informationtegio steffen Carcase/Front Interior colour Colour code Applic. Sanremo oak light colour Applic. walnut colour Applic. white matt oak dark colour
Carcase/Front Interior colour Colour code Applic. Sanremo oak light colour Applic. Sanremo oak dark colour Applic. walnut colour Applic. white matt White matt/colour glass crystal white (or mirror) Structure
More informationSPARE PARTS LIST RIDERS RIDER 111 B, , , , ,
SPARE PARTS LIST RIDERS RIDER 111 B, 965996801, 965996885, 966663185, 967186501, 2011-02 CHASSIS & ENCLOSURES RIDER 111 B, 965996801, 965996885, 966663185, 967186501, 2011-02 CHASSIS & ENCLOSURES RIDER
More informationConveyor track made of section profiles and roller elements
-4 MGE 1. Elements for manual movement Conveyor track made of section profiles and roller elements Economical solution for manual slide sections Roller elements can e clipped in Accessories: Roller elements
More informationKlöber Orbit. Design: Eckhard Hansen, Gerhard Reichert
Klöber Orbit Design: Eckhard Hansen, Gerhard Reichert Thanks to the elastic, anatomically shaped backrest frame, sitting in Orbit feels like sitting on a water-bed. For the manager s office or the front
More informationStandard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
More informationTABLE OF CONTENTS SERIES 40
TABLE OF CONTENTS SERIES ALUMINIUM PROFILES SERIES PAGE Technical data and profile cross-sections 2.4-2.17 Processing of profiles for connectors 2.1-2.19 Prices of aluminium profile processing 2. Aluminium
More informationALUMINIUM PROFILE SYSTEM SERIES 40
ALUMINIUM PROFILE SYSTEM SERIES With the basic grid mm (slot 5); mm (slot 6), 16mm, mm and 0mm (slot ). In addition to this, the complete connection technology and a large range of accessories. TABLE OF
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E937 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 12 15 (E2) 1 625 5 624 626 627 628 4 6 22 23 24 25 629 630 7A 8 36 37 9 11 10 12 13 2 14 3 15 16 17 18 19 20 21 26 27 28 29
More information1 RS-300/D 320/D 340/D 350H Parts Manual
300/D 320/D 340/D 350H Parts Manual Table Of Contents Three Point Hitch / Hitch Frame Assembly... 3 Tongue Pull Hitch Assembly... 7 Main Gearbox... 11 Crank Handle & Gear... 13 Hydraulic Lift... 15 Rotor
More informationMH3. Door Stops (Floor Mounts) Door Stops (Wall Mounts) Door Holders (Door Mounts)
CH-202NS...MH20 DB-008...MH11 DB-036a...MH11 DC-011...MH23 DC-018...MH21 DC-063...MH23 DC-070...MH12 DG-106N...MH21 DG-109...MH21 DG-110...MH21 DG-111...MH21 DP-042...MH23 DP-042L...MH23 DS-003...MH 4
More informationSolu. Stainless steel legs. Product Catalogue HARDWARE. Combining Design And Engineering Excellence. Furniture Hardware
HARDWARE Combining Design And Engineering Excellence Stainless steel legs Product Catalogue Solu 2013.10 Updated Aluminium Frame Door And Edge Profiles Handle Free Solutions Solu offer a range of metal
More informationAccessories (additional charge):
Alurail With Alurail, BOPLA has developed a modular DIN rail enclosure which is especially suitable for use in measurement, control and automatic control technology. Basic profiles, each in eight standard
More informationRectangular profiles RE 40
8.3 luminium profiles Rectangular profiles Features Universal precision, clamping and machining surface s a stabiliser for machine and subframe constructions luminium, ly anodised Produced in accordance
More informationSeries 2000 Entrance Door Price List
Series 2000 Entrance Door Price List 02.04.2018 Hörmann United Kingdom Hörmann (UK) Limited Gee Road Coalville Leicestershire LE67 4JW Phone: 01530 513000 Fax: 01530 513001 info@hormann.co.uk Leicestershire
More informationFrontal Covers 9 º qâ Ê ³ n 9.1
.0 Frontal Covers.1 Furniture handles and knobs Furniture handles combine functionality and design and give a individual and personal touch to each piece of furniture. Häfele provides a huge range of furniture
More informationAluminium Profiles / Profilkönig
Aluminium Profiles / Profilkönig Aluminium profiles / Profilkönig 7 9.6 2 4. 7.5 7 5.6 9.6 x 2.0 mm 7.5 x 7.0 mm 7.5 x 7.0 with collar 24.5 x 7.7 mm 20.0 x 8.5 mm 4. 7 7.5 24.5 24.5 2 3 3 4 5 20.0 7.7
More informationlightlight 2018 Index
lightlight 2018 Index - 2018 lightlight Designing space This document contains a complete overview of the lightlight range. lightlight comprises a variety of state-of-the-art lighting systems for illuminating
More informationHettich lager sortiment
Hettich lager sortiment Finest quality workmanship Our promise to you, our customers, is outstanding quality. In every single Hettich product. How do we keep this promise? With the passion, expertise and
More informationSPARE PARTS LIST FRONTRIDERS FR2312 MA, , ,
SPARE PARTS LIST FRONTRIDERS FR2312 MA, 966639801, 966639885, 2011-02 CHASSIS & ENCLOSURES FR2312 MA, 966639801, 966639885, 2011-02 CHASSIS & ENCLOSURES FR2312 MA, 966639801, 966639885, 2011-02 Ref Part
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E945 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2006 10 11 (E1) 1 2 602 603 4 5 6 7 3 8 9 10 11 12 22 23 24 25 26 601 30 31 32 33 604 605 606 607 608 628 601 609 13 14 15 16 17
More informationHinges Drawer Slides Drawer Systems Accessories
NÜVO Conceived and designed in Europe Hinges Drawer Slides Drawer Systems Accessories NÜVO A u g u s t 2 0 1 3 e d i t i o n LIFETIME WARRANTY HINGES NÜVO 8mm Dowels Screw-in S Self-Close 11 mm Ø 8 mm
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E946 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2006 10 11 (E1) 602 603 4 5 6 7 3 8 9 10 11 12 22 23 24 25 26 601 30 31 32 33 604 605 606 607 608 628 13 14 15 16 39 18 19 21 27
More informationHanging Cabinets & Accessories
.0 Hanging Cabinets & Accessories.1 Blum AVENTOS HK-Stay lift for wooden fronts or wide alu frames Material: Steel mechanism, plastic cover caps Finish: Mechanism galvanized, cover cap grey Adjustment:
More informationALUMINIUM LED PROFILES
VB-ALP SERIES ALUMINIUM LED PROFILES 2015 VOLUME 3 ^ 2 x mounting clips for 1m profiles or 3 x mounting clips for 2m profiles are recommended # 2 x cables for 1m profiles or 3 x cables for 2m profiles
More informationRA 800 Sauber Accessories Brush body. As at: 01/15/10 Time:21:28
Accessories Brush body As at: 01/15/10 Time:21:28 Accessories Brush body As at: 01/15/10 Time:21:28 Pos. Description Reference 01 Allen-screw M 8x55 P...489 H 02 U-shim M 8 P...497 T 03 Roller 530.136
More informationB12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS
B12 TILT-TURN WINDOWS B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationRepair Parts Parts List for RIDGID 10 Compound Miter Saw Model No. MS1065LZ RIDGID parts are available on-line at
0. Repair Parts Model No. MS0LZ 0 0 0 0 0 FIGURE A. 0. 0 0 0 0. 0 0 WARNING: The assembly shown represents an important part of the Double Insulated System. To avoid the possibility of alteration or damage
More informationSPAREPARTSCATALOG: // ENGINE 390 DUKE 2015 ART.-NR.: 3CM081270OEN
SPAREPARTSCATALOG: // ENGINE ART.-NR.: 3CM08270OEN CONTENT ENGINE CASE CLUTCH COVER 3 CRANKSHAFT, PISTON BALANCER SHAFT 4 CLUTCH 7 SHIFTING MECHANISM 5 TRANSMISSION I - MAIN SHAFT 8 WATER PUMP CYLINDER
More informationDRIVE SYSTEM. Operation and support elements made of stainless steel for chambers and water treatment works
DRIVE SYSTEM Operation and support elements made of stainless steel for chambers and water treatment works Page 1 DALMINEX www.dalminex.de info@dalminex.de DRIVE SYSTEM Foreword DALMINEX, has been producing
More informationC.9.CHRONO INVISI TILT AND TURN
C.9. Contents General characteristics... Base set (standard) n 31117, 31118 and 31119... Selection of rods n 30000-...... Installation instructions... Base set PLUS n 31517, 31518 and 31519 Installation
More informationPARTS LIST
2017.09.28 PARTS LIST TABLE OF CONTENTS Lower parts after serial no. (12.2012) 1 Lower parts before serial no. (11.2012) 4 Container and Filters 7 Nozzles Ø 32 mm 9 Hose and tubes 11 Power brush UZ 984
More informationOFFICE & WARDROBE HANGING RAILS AND FITTINGS 696 HANGERS AND STORAGE 700 DESK CABLE COVERS 705 FURNITURE LEGS 706 DESK LOCKS 707 CASTORS 711
OFFICE & WARDROBE HANGING RAILS AND FITTINGS 696 HANGERS AND STORAGE 700 desk KEYBOARD TRAY 704 DESK CABLE COVERS 705 FURNITURE LEGS 706 DESK LOCKS 707 CASTORS 711 FILE ACCESSORIES 714 CD & DVD HOLDER
More informationReflection. Aluminium Sectional Doors
Reflection Aluminium Sectional Doors The Reflection aluminium sectional door features a chic round edge aluminium extrusion that can be clad with either glass or acrylic. Featuring a strong, sleek and
More informationContents. New: "C" column in sparepart tables indicates consumable parts. Edition 9 February 2006 Service Manual DPX System Page 10.
Contents Magazine (1)... 2 Magazine (2)... 4 Cables for carriage/drum sensor... 6 Motors and Sensors... 8 Guides... 10 Rollers (1)... 12 Rollers (2)... 14 Buffer Guide... 16 Laser and Car system... 18
More informationE03 CYLINDER HEAD ASSY 1 BN0030 Dowel Pin 4
E01 FAN COVER ASSY 1 BN0061-1 Clip 1 2 150ZT-E01.02 BN0064 Fan Cover 1 3 BN0061-2 Bracket 1 4 150ZT-E01.04 BN0064-4 Carburetor Cooling Duct 1 5 150ZT-E01.05 BN0064-3 Decorative Cover 1 6 150ZT-E01.06 BN0063-2
More informationAra 4. Mounting and installation instructions. Item no.: Ara K black. User manual
Ara 4 User manual Mounting and installation instructions Item no.: 1145 3110 Ara 4 3000K black +99082095 10.01.2014 1. Product overview (ordering) 1. Fitting Ara 4 1145 3110 Mounting Brackets A 1148 8001
More informationC12.11 SALTO 4208 C12 SIDE HUNG WINDOWS
C12 SIDE HUNG WINDOWS C12.11 01.07.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE
PLUS 254 06_-Line A5_NEU_GB 22.01.12 21:56 Seite 255 - able carriers for movements For three-dimensional movements an be deployed on robots for swiveling and rotational movements: The same system for robot
More informationMAINTENANCE INSTRUCTIONS
MAINTENANCE INSTRUCTIONS ECOMAT EASY / GIROTEC WRS Version G0101 ECOMAT EASY H / GIROTEC WRS H Version G0301 ECOMAT PLUS / ECOMAT PLUS H Versions G0503 / G0603 V 2.0 Table of contents 1/3 1.0 Maintenance
More informationAluminium Profile Catalog Version 1.0 English
Aluminium Profile Catalog - 2008 Version 1.0 English Product Range Aluminium Profile and Accessories - Extruded aluminium profiles - Joining elements - Levelling feet - End covers and slot covers Assembly
More information