C12.11 SALTO 4208 C12 SIDE HUNG WINDOWS
|
|
- Melvin Dorsey
- 5 years ago
- Views:
Transcription
1 C12 SIDE HUNG WINDOWS C Waregemstraat Zulte - Belgium - T F commercial@sobinco.com -
2 CONTENTS 1. General characteristics... C Base sets for handles with 2 forks... C Base sets for handles with 1 fork... C Vertical centre locking sets n and C Vertical centre locking sets n and N.. C Horizontal centre locking set n C Special accessories... C Reinforcement set n C Window stay n , -902 or -903 C Run on rest n C Drive pin n C Hinges...C Handles...C Handles with 2 forks C Handles with 1 fork C S handle C Handle preparation C Cover n C Lockcase n C Order tables...c General information... C C
3 1. General characteristics Totally clampable turn system available in 5 different base sets of which 3 sets are operated by a handle with 2 forks (series 4200) and 2 sets which are operated by a handle with 1 fork (series 4000). The system can also be used for windows higher and/or wider than 1200 mm providing that the following centre locking sets are used: 1. Handles with 2 forks series 4200 n for vent height = mm n for vent height = mm n for vent width = mm 2. Handles with 1 fork series 4000 n for vent height = mm n N for vent height = mm n for vent width = mm The side hung open in windows can be provided with the following hinges: 2-part hinges n and -221: max. vent weight 75 kg, max. vent width 1000 mm 3-part hinges n and -321: max. vent weight 80 kg, max. vent width 1200 mm bottom hinge n top hinge n : same appearance as the turn-tilt hinges max. vent weight 90 kg, max. vent width 1400 mm bottom hinge n top hinge n : both hinges have horizontal adjustment the bottom hinge has vertical adjustment same appearance as the turn-tilt hinges max. vent weight 90 kg (up to 130 kg provided that the additional reinforcement set n is used), max. vent width 1700 mm All handles with 1 fork can also be used for the turn-tilt system SALTO 4008 and all handles with 2 forks have the same shape as the turn-tilt system. Therefore side hung open in, turn-tilt and tilt-turn windows can be used next to one another with the advantage of having the same appearance. Very quick assembly: totally clampable system pre-assembled components and screws easy access to fixing and adjustment screws All parts are made of non-corroding materials. Size range: vent width: mm. vent height: mm. vent weight: max. 75 kg or 80 kg or 90 kg or 130 kg dependent on which hinges are used. Special dimensions on request! The SALTO system has been tested in accordance with following standards: Belgian standard STS 52.0 for windows 50 m or more above the ground. German standard RAL-RG 607/3 : Class F130-9 Polish standard One system suitable for profiles with frame groove width from 10 to 14 mm. See table. B (mm) C (mm) D (mm) E (mm) C
4 2. Base sets for handles with 2 forks Vent width Fb = max mm Vent height Fh = mm run on rest wedge connection piece connection piece bolt screw wedge connection piece connection piece bolt screw locking point wedge connection piece connection piece screw C
5 3. Base sets for handles with 1 fork Vent width Fb = max mm Vent height Fh = mm N connection piece wedge bolt screw N connection piece locking point wedge screw C
6 4. Vertical centre locking sets n and To be used with base sets n , and Vent height Fh = mm Windows with vent height from 1200 to 1800 mm require a centre locking set n The centre locking set n can be used with base sets n , -51 and locking point wedge In combination with one of the following base sets: N base set T1 T Fh-A-265 A-150 Vent height Fh = mm Windows with vent height from 1800 to 2400 mm require a centre locking set n The centre locking set n can be used with base sets n , -51 and locking point locking point wedge In combination with one of the following base sets: N base set T3 T (Fh-A)/2-110 A-265 C
7 5. Vertical centre locking sets n and N To be used with base sets n and C12.11 Vent height Fh = mm Windows with vent height from 1200 to 1800 mm require an additional wedge n The wedge n can be used with base sets n and wedge In combination with one of the following base sets: N base set T1 T Fh-A-137 A Fh-A-150 A-150 Vent height Fh = mm Windows with vent height from 1800 to 2400 mm require a centre locking set n N. The centre locking set n N can be used with base sets n and N locking point wedge In combination with one of the following base sets: N base set T3 T (Fh-A)/2-105 A (Fh-A)/2-110 A-150 C
8 6. Horizontal centre locking set n Vent width Fb = mm corner transmission clip locking point wedge In combination with one of the following base sets: Handle with 1 fork N base set OR Handle with 2 forks Windows with vent width from 1200 to 1700 mm require a centre locking set n A horizontal centre locking set is not possible with base sets n , -52 and Special accessories 7.1. Reinforcement set n For windows with vent weight between 90 kg and 130 kg and with Fb > 1400 mm the reinforcement set n must be used to reinforce the top hinge. The M4x10 thread forming screws must fix into at least 6 mm of aluminium. Drilling jig n is available for drilling the holes. Note: The reinforcement set can only be used in combination with the adjustable hinge n Reinforcement set n reinforcement piece screw C
9 7.2. Window stay n , -902 or -903 The window stay restricts the opening angle of the window in turn position. The window stay should be used for safety purposes or where the opening arc may be obstructed. The position of the stay will dictate the opening angle of the window. The window stay is detachable by turning rivet R with a 4 mm hexagon key. The window stay has integral friction adjusted by turning the screw S. The stay can hold the vent in any turn position. Fb = mm Order code Y X Dimension X restricts the opening angle at ± Run on rest n The run on rest n is recommended to reduce the pressure on the hinges in closed position. It is used in combination with wedge n The run on rest n should not be ordered separately when using base set n or with windows with a horizontal centre locking set because it is included in these sets. The run on rest is simply pushed into the rod groove of the vent section Drive pin n For windows with vent height from 300 to 400 mm drive pin n must be ordered in addition. This is only suitable for windows operated by a handle with 1 fork. These windows require one single connecting rod between the top and bottom bolt n (set n ) or between the top and bottom locking point n (set n ). The rod is cut and drilled as shown. The n drive pin is riveted into the ø6.1 mm hole and acts as the drive for the handles with 1 fork. C
10 8. Hinges The hinges have the same shape as the turn-tilt hinges. Both turn-tilt windows and side hung open in windows can be placed next to one another with the advantage of having the same appearance. Finish of all hinges: aluminium anodised or polyester powder coated (more than 450 RAL colours). Two part hinges Three part hinges n and n and max. 75 kg vent weight max. 80 kg max mm vent width max mm Order code G Fh=max mm 2 hinges Fh= mm 3 hinges Fh= mm 4 hinges Salto bottom hinge Salto top hinge n n max. vent weight : 90 kg max. vent width : 1400 mm Order code Fh=max mm 1 hinge Fh= mm 1 hinge + 2 hinges Fh= mm 3 hinges Salto bottom hinge Salto top hinge n n The maximum vent weight can be increased to 130 kg provided that the reinforcement set n is added. Continuous horizontal (+/-1 mm) and vertical (+/-2 mm) adjustment after installation. max. vent weight : 90 kg (130 kg) max. vent width : 1700 mm Order code Fh=max mm 1 hinge + 1 hinge Fh= mm 1 hinge + 1 hinge + 1x Fh= mm 1 hinge + 1 hinge + 2x > 90kg and/or Fb>1400mm Continuous horizontal (+/-3 mm) adjustment after installation. Wedge n C
11 9. Handles 9.1. Handles with 2 forks Handle n and n CYL throw = 17 mm n n CYL The design handles with 2 forks have the same shape as the handles for turn-tilt and tilt-turn windows. Therefore side hung open in, turn-tilt and tilt-turn windows can be used next to one another with the advantage of having the same appearance. In open position the forks are sliding over each other. Finish: grip in aluminium and base in zinc alloy, always polyester powder coated (more than 450 RAL colours). The cylinder locking handle can be locked in closed position. Fixing holes see page C Handle n and n CYL throw = 17 mm n n CYL C
12 Handle n and n CYL throw = 17 mm n n CYL The handles with 2 forks have the same shape as the handles for turn-tilt and tilt-turn windows. Therefore side hung open in, turn-tilt and tilt-turn windows can be used next to one another with the advantage of having the same appearance. In open position the forks are sliding over each other. Finish: grip and base in aluminium anodised or polyester powder coated (more than 450 RAL colours). The cylinder locking handle can be locked in closed position. Fixing holes see page C Handle n and n CYL throw = 17 mm n n CYL C
13 Handle n V, -217V, -215V and loose grip n 505 throw = 17 mm throw = 17 mm n V n V The handles have the same shape as the handles for turn-tilt and tilt-turn windows. Therefore side hung open in, turn-tilt and tilt-turn windows can be used next to one another with the advantage of having the same appearance. Finish: handle n V and -217V in zinc alloy, always polyester powder coated (more than 450 RAL colours). handle n V and loose grip n 505 in aluminium anodised or polyester powder coated (more than 450 RAL colours). In open position the forks are sliding over each other. The handle can be operated by loose grip n 505 or, in case of fire, the square pointed end of a fireman s axe. Fixing holes see page C This is especially suitable in places where only authorized persons can open the windows, but in case of fire a fireman s axe can also operate the handle. throw = 17 mm n V n 505 C
14 9.2. Handles with 1 fork Handle n and n CYL throw X=17 mm by turning 90 n n CYL The same handles can also be used for turn-tilt and tilt-turn windows. Therefore side hung open in, turn-tilt and tilt-turn windows can be used next to one another with the advantage of having the same appearance. Finish: grip in aluminium and base in zinc alloy, always polyester powder coated (more than 450 RAL colours). The cylinder locking handle can be locked in closed position. Fixing holes see page C Handle n and n CYL throw X=17 mm by turning 90 n n CYL C
15 Handle n and n CYL throw X=17 mm by turning 90 n n CYL The same handles can also be used for turn-tilt and tilt-turn windows. Therefore side hung open in, turn-tilt and tilt-turn windows can be used next to one another with the advantage of having the same appearance. Finish: grip and base in aluminium anodised or polyester powder coated (more than 450 RAL colours). The cylinder locking handle can be locked in closed position. Fixing holes see page C Handle n and n CYL throw X=17 mm by turning 90 n n CYL C
16 Handle n V, -217V, -215V and loose grip n 505 throw X=17 mm by turning 90 throw X=17 mm by turning 90 n V n V The same handles can also be used for turn-tilt and tilt-turn windows. Therefore side hung open in, turn-tilt and tilt-turn windows can be used next to one another with the advantage of having the same appearance. Finish: handle n V and -217V in zinc alloy, always polyester powder coated (more than 450 RAL colours). handle n V and loose grip n 505 in aluminium anodised or polyester powder coated (more than 450 RAL colours). The handle can be operated by loose grip n 505 or, in case of fire, the square pointed end of a fireman s axe. Fixing holes see page C This is especially suitable in places where only authorized persons can open the windows, but in case of fire a fireman s axe can also operate the handle. throw X=17 mm by turning 90 n V n 505 C
17 9.3. S handle Standard handle S -handle 9.4. Handle preparation Standard handle S -handle A drilling jig n is available for the handle cut-outs. C
18 9.5. Cover n Cover to restrict the handle movement at 90. Not possible for handles n and Non-handed. Order separately. Not possible 10. Lockcase n The lock can be used with base sets n and -54. Lockcase n , operated by a handle with square spindle of 7 mm. L = calculated length when using rod connection piece N PREPARATION (only 1 cut-out) The lock can also be operated by the Sobinox handles in stainless steel. See chapter C Cut out until depth A The lockcase is made entirely of noncorroding materials. The installation is only possible for vent heights over: 525 mm using base set n mm using base set n Screws are not included. M5x10 DIN 913 only for fixing during transportation. Handle with square spindle 7 mm C
19 11. Order tables Fb < 1200 Fb = Fh = Fh = Fh = or + or 2x T + or 2x U + or 1x V + 1x W + or 1x X + 1x Y or + or 3x T + or 3x U (Fb = max. 1000) (max. 75 kg) (Fb = max. 1200) (max. 80 kg) (Fb = max. 1400) (max. 90 kg) (Fb = max. 1400) (max. 90 kg) (Fb = max. 1000) (max. 75 kg) (Fb = max. 1200) (max. 80 kg) + or 1x V + 2x W (Fb = max. 1400) (max. 90 kg) + or 1x X + 1x Y + 1x Z (Fb = max. 1700) (max. 90 kg) or + or 4x T + or 4x U N (Fb = max. 1000) (max. 75 kg) (Fb = max. 1200) (max. 80 kg) or 1x V + 3x W (Fb = max. 1400) (max. 90 kg) + or 1x X + 1x Y + 2x Z (Fb = max. 1700) (max. 90 kg) Vent weight from 90 kg to 130 kg: always use hinges X and Y with reinforcement set n N Hinges G (mm) T U V W X Y Z Order example: A side hung open in window with overall vent width (Fb) 1300 mm and overall vent height (Fh) 1600 mm in which glass has a thickness of 16 mm and a weight of 40 kg/m2. Note: to determine the precise vent weight see next page. Fittings to order: 1x x x x x x x C
20 12. General information The handle height should not be less than 1/3 of the vent height. Technical advise should be sought when the sizes of your window are not shown in the chart. In schools and in other places where safety is important, we advise the use of a window stay n , -902, -903 and a handle with cylinder. The system is made of noncorroding materials. The set should not be installed in corrosive atmospheres. Sobinco cannot be held responsible for the malfunctioning of the system if any non-sobinco parts are used. Surface treatment of vent and frame must take place before assembly of the set, as this will affect the working of the gear. Glazing must be in accordance with national standards. The window and gear should be kept clean and lubricated in accordance with our maintenance instructions (copy available on request). Vent height Fh max. 75 kg Vent height Fh max. 80 kg Vent width Fb Vent width Fb Glass thickness without air gap mm kg/m² Vent height Fh max. 90 kg Vent height Fh max. 130 kg Vent width Fb Vent width Fb C
A12.11 SALTO 4008 A12 TURN-TILT WINDOWS
A12 TURN-TILT WINDOWS A12.11 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More informationB12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS
B12 TILT-TURN WINDOWS B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationB.1.CHRONO SIDE HUNG OPEN IN WINDOWS
B.1. SIDE HUNG OPEN IN Contents General characteristics................... page B.1.2 Base set n 20110...................... B.1.4 Centre locking sets n 30140-800 and 20140-35..........................
More informationC.4.CHRONO TILT AND TURN
C.4. Contents General characteristics................... Base set n 31111, 31112 and 31113...... Centre locking set n 30140-30........... Selection of rods n 30000-................ page C.4.2 C.4.5 C.4.6
More informationG11.11 INVISITOP FOR BOTTOM HUNG WINDOWS
G11 FAN LIGHT WINDOWS G11.11 50141 FOR BOTTOM HUNG WINDOWS 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationA.10 CHRONO FOR PIVOTING WINDOWS. Contents. Horizontal and vertical pivoting windows
A.10 Hizontal and vertical pivoting windows CHRONO 10040 FOR PIVOTING WINDOWS Contents 1. General characteristics A.10.02 2. Base set n 10040 A.10.03 3. Centre locking set n 30140-800 A.10.04 4. Selection
More informationC.9.CHRONO INVISI TILT AND TURN
C.9. Contents General characteristics... Base set (standard) n 31117, 31118 and 31119... Selection of rods n 30000-...... Installation instructions... Base set PLUS n 31517, 31518 and 31519 Installation
More informationC13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationFrENcH casement windows D11.15 HINGES
D11 French casement windows HINGES 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Hinges Contents 1. General....03
More informationRC2 B11.09 CHRONO SAFE (RC2) B11 TILT-TURN WINDOWS
B11 TILT-TURN WINDOWS RC2 B11.09 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More informationC14.12 WINDOW STAYS C14 SIDE HUNG WINDOWS
C14 SIDE HUNG WINDOWS 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Window stays series 681-.. and n 684-12....03
More informationRC2 E11.09 CHRONO SAFE (RC2) E11 BOTTOM HUNG OPEN IN WINDOWS
E11 BOTTOM HUNG OPEN IN WINDOWS RC2 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...03
More informationTURN-TiLT WiNDOWs A11.16 CHRONO ACCessORies
A11 TURN-TILT WINDOWS A11.16 CHRONO Accessories 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. Window stay
More informationK17.13 DOOR STAYS K17 DOORS
K17 DOORS K17.13 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door stays n 684(C)-500...K17.13.03 1.1.
More informationC.3 CHRONO MISCELLANEOUS. Contents. turn-tilt- and tilt-turn window
C.3 Turn-tilt and tilt-turn windows CHRONO MISCELLANEOUS Contents 1. Night vent device n 30140-861 C.3.02 1.1. General C.3.02 1.2. Profile dimensions C.3.02 1.3. Operation C.3.03 1.4. Air flow C.3.03 1.5.
More informationH13.11 HANDLES H13 HORIZONTAL AND VERTICAL PIVOT WINDOWS
H13 HORIZONTL N VERTIL PIVOT WINOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - coercial@sobinco.com - www.sobinco.com ONTENTS 1. General information....03
More informationF11.13 FRICTION HINGES F11 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS
F11 AND TOP HUNG WINDOWS F11.13 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General information...f11.13.03
More informationSingle locks series k
k12 Doors K12.13 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. Door locks series 8000... K12.13.03 1.1.
More informationA.15 HANDLES FOR PERIMETER LOCKING SETS. Contents. Horizontal and vertical pivoting windows
.15 Horizontal and vertical pivoting windows HNLES FOR PERIMETER LOKING SETS ontents 1. General information.15.02 1.1. Handles series 501, 502 and 503.15.02 1.2. Handles series 5010, 5020 and 5030.15.02
More informationK16.14 STAINLESS STEEL DOOR PULLS
K16 DOORS K16.14 01.06.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K16.14.03 1.1. General information
More informationEA patch fittings for offset hung doors in toughened glass assemblies 56. Top centres for wood and steel frames 58. Glass preparation details 60
EA General information 50 EA patch fittings for offset hung doors, 24 mm frame stop depth EA patch fittings for offset hung doors, various frame stop depths 54 EA patch fittings for offset hung doors in
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationSliding Door Fittings, Roller Shutters Folding Sliding Door Fittings
Silent Fold 20/A, door weight up to 20 kg Area of application: For folding doors mounted to the carcase on one side, without running and guide track, for opening and closing the folding doors without blocking
More informationEA patch fittings for offset hung doors in toughened glass assemblies 56. Top centres for wood and steel frames 58. Glass preparation details 60
EA General information 50 EA patch fittings for offset hung doors, 24 mm frame stop depth EA patch fittings for offset hung doors, various frame stop depths 54 EA patch fittings for offset hung doors in
More informationDICTATOR RTS Tube Door Closer
DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is virtually invisible because being built into the door. The joint can only be seen when the door is open. The
More informationFurniture Fittings Hinges and Flap Fittings
Glass door hinge Area of application: For inset glass doors Glass door height: Max 1,200 mm Glass door width: Max 400 mm For door weight: Max 10 kg Material: Zinc alloy, steel, PVC Glass thickness: 6-10
More informationPatio doors max. Sash width (mm) 600 to Sash height (mm) 550 to Sash weight (kg) max. 150 max. 150
ALU 5200-D (150 kg) Turn only hardware for hinge clearance (BD) 5 mm BD 5 Size range (depends on hardware) Windows min. max. Patio doors max. Sash width (mm) 600 to 1600 1300 Sash height (mm) 550 to 2000
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationALU 5200-TBT (150 kg)
ALU 5200-TBT (150 kg) FBS Tilt-and-turn hardware for hinge clearance (BD) 5 mm with mishandling device (FBS) on the corner drive (EUL) KPW BD 5 Tilt point horizontal (KPW) Size range It is essential to
More informationHinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
More informationPatio doors max. Sash width (mm) 365 to Sash height (mm) 550 to Sash weight (kg) max. 100/130 max. 100/130
ALU 5200-D (130 kg) Turn only hardware for hinge clearance (BD) 5 mm BD 5 Size range It is essential to adhere to the details of the system provider. Windows min. max. Patio doors max. Sash width (mm)
More informationFloor Spring Accessories DORMA. BTS Accessories
Floor Spring Accessories DORMA BTS Accessories Floor spring accessories Single action aluminium doors For single action aluminium doors Aluminium door straps 2 For flush-closing single action aluminium
More informationTHE NEW HARDWARE SYSTEM ALU 540. Roto ALU 540. FB 44-0 GB July 2005 Alu B.U./J.S. (Translation: Prunty 9/05)
THE NEW HARDWARE SYSTEM ALU 540 1 APPLICATION RANGE Hinge-side compatible with all conventional Euro-chamber profiles Clampable hinge-side with preassembled clamp-strips Available for all standard opening
More informationSliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings
Ultra 20 Swing Door fitting, door weight up to 20 kg Area of application: Door swings out to the front and to the side when being opened, allowing unlimited access to the cabinet interior, can be used
More informationJdB cassette. Version 1.03 Sun Protection AVZ 3J.1
Version 1.0 Sun Protection AVZ J.1 J.2 Sun Protection AVZ Version 1.0 4211 424-000 Alu wall bracket JdB 95 mm Mill finish 4211 424-006 Idem RAL 9010 pure white 4211 424-755 Idem (* = Textured) RAL 7016
More informationDoor Hinges Concealed Hinges
Concealed mortise hinge For installation in wall recesses For flush wooden or metal doors Suitable for DIN left hand and DIN right hand Certified for fire resistant and smoke control doors in compliance
More informationTECHNOLOGY IN MOTION MACO MULTI-TREND TU.-ON. AND T&T FITTINGS. Installation instructions TIMBER WINDOWS
TECHNOLOGY IN MOTION TU.-ON. AND T&T FITTINGS Installation instructions TIMBER WINDOWS System designation: TO > Single routing DT > Double routing AS > Face fix fittings Note about surfaces fittings are
More informationThe Rittal Flex-Block base/plinth system
The Rittal Flex-Block base/plinth system 50 Save time Fast assembly by simply clipping together the base/plinth components Easily bayed with toolless baying clip The enclosure is easily transported in
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationTECHNOLOGY IN MOTION MACO MULTI-MATIC TILT AND TURN FITTINGS. Installation instructions PVC WINDOWS
TECHNOLOGY IN MOTION TILT AND TURN FITTINGS Installation instructions PVC WINDOWS Note on the surfacefinish fittings are electrogalvanised, passivated and sealed with wax. We guarantee that the surfacefinish
More informationBTS Accessories. Floor Spring Accessories
BTS Accessories Floor Spring Accessories Floor spring accessories Single action aluminium doors For single action aluminium doors Aluminium door straps 2 For flush-closing single action aluminium doors
More informationEos 200/40. Eos. Type A (cm) X B(cm) M 2 H1(cm) H2(cm)
Eos 200/40 Eos Color RAL 9005 RAL 6009 Polycarbon 10mm Security 4mm Mounting difficulty Type A (cm) X B(cm) M 2 H1(cm) H2(cm) ET23 314 cm x 396 cm 11,2 m 2 201 cm 260 cm 38 - - ET2E 236 cm x 73 cm 1,7
More informationALPRO ALPRO. The hinge system for aluminium and steel doors
The hinge system for aluminium and steel doors 2 INDEX The hinge system for aluminium and steel doors 5 6 7 Aluminium door hinge Aluminium and stainless steel for inward-opening doors for inward-opening
More informationHAUTAU ATRIUM Alu-HKS 200. for aluminium systems
Catalogue HAUTAU ATRIUM Alu-HKS 200 for aluminium systems HAUTAU Catalogue Tilt and Slide Fittings ATRIUM Alu-HKS 200 2017 Version 08/2017 You will find the latest catalogue version online on www.hautau.de
More information0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table
Type overview FSR with guide cables or rods Type key FSR P S 0 0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table Cover panel without back-fold: S = small,
More informationFittings and door rails for toughened glass assemblies
Fittings and door rails for toughened glass assemblies Universal / RP / EA / TP/TA VISUR / BEYOND / SG Contents PRODUct range 4 5 UNIVERSAl 6 41 RP 42 47 EA 48 60 TP/TA 62 91 visur 92 99 beyond 100 109
More informationTECHNICAL APPLICATIONS. Metalpak Sb200
TECHNICAL APPLICATIONS Metalpak Sb200 Metalpak is a sun blind with slats which can be packed and adjusted, at the very cutting edge in terms of sturdiness and design. Used outside a building, it stands
More information2: Ecokit Ecokit 11 Overview A 2_ Ecokit 11 Sub Rack Configuration A 2_ Width A 2_ Height / Depth A 2_6
2: Ecokit 11 2.1 Ecokit 11 Overview 2_3 2.2 Ecokit 11 Sub Rack Configuration 2_5 2.2.1 Width 2_5 2.2.2 Height / Depth 2_6 2.2.3 Handles 2_6 2.2.4 Line Drawing 2_7 2.3 daptation Kits 2_8 2.3.1 daptation
More informationAluminium Productive Fence System 40 PRODUCT CATALOGUE
11 2017 (e) Aluminium Productive Fence System 40 PRODUCT CATALOGUE solutions by F.EE Elektrotech Engineering Automation Robotik Informatik + Systeme Energietechnik F.EE GmbH In der Seugn 10 and 20 D-92431
More informationIncorporating V2.0. Product spec >>> > Series DD - Double deflection grilles
Incorporating V2.0 Product spec >>> > Series DD - Double deflection grilles Grilles Double deflection Recommended for: Wall, ceiling & duct Supply & extract Overview Enhanced functionality As per the name,
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationSolu. Stainless steel legs. Product Catalogue HARDWARE. Combining Design And Engineering Excellence. Furniture Hardware
HARDWARE Combining Design And Engineering Excellence Stainless steel legs Product Catalogue Solu 2013.10 Updated Aluminium Frame Door And Edge Profiles Handle Free Solutions Solu offer a range of metal
More informationSTRUCTURAL GLAZING LTD. SG2000 Product Manual. Fixed Glazed Units Top Hung Windows Side Hung Windows
SG2000 Product Manual Fixed Glazed Units Top Hung Windows Side Hung Windows SG PRODUCT RANGE The Structural Glazing range comprises of three core products: THE SG2000 ECO VENT THE SG2000-101/2 FIXED LIGHT
More informationStirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationThe following information from the aluminium planning manual must be observed:
ALU 5200-TBT E RC 2 The anti-intruder tilt-and-turn hardware for aluminium windows and French doors. Application for testing according to EN 1627ff RC 2, RC 2 N KPW BD 3,5 BD 5 Size range It is essential
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More informationExternal venetian blinds with interlocking slats E 73/93/90 A6, C 73/93/90 A6, E 90 A5, C 90 A5 Description
2 3 1 Application For mounting on mullion/transom facades or conservatories, in the soffit or in ventilated facades, in double skin facades, in front of the facade as well as indoors. 4 5.1 7 5.2 6 Operation
More informationIncorporating V2.1. Product spec >>> > Series ECG - Egg crate grilles
Incorporating V2.1 Product spec >>> > Series ECG - Egg crate grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract grille Plastic egg crate core optional
More informationHelios Twin 200/25. Helios Twin. Mounting difficulty
Helios Twin 200/25 Helios Twin Bemating: zie Helios (2 x A) Dimensions: See Helios (2 x A) Dimensions: Voir Helios (2 x A) Abmessungen: Sehe Helios (2 x A) Mounting difficulty 38 Helios Multibay Greenhouses
More informationProfile guide/actuator - RK Compact
Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of
More informationFENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET SCF PVC
FENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION 06.2 Tilt&Turn Hardware UNI-JET SCF PVC Table of Contents 06.2 UNI-JET SCF PVC 06 2 DIRIGENT T&T Handle... 06.2.9 Tilt&Turn Sash...
More informationCabinets PROLINE. Modifications. Overview Cabinets Climate Control Cases Subracks/ 19" chassis Modules...
Overview... 0 Cabinets Cabinets... 1 Climate Control... 2 Cases... 3 Subracks/ 19" chassis... 4 Modules... 5 41003002 Systems... 6 Power supply units... 7 Backplanes... 8 41096005 41096010 Grid Assembly
More informationIncorporating V2.0. Product spec >>> > Series NV - Non vision grilles
Incorporating V2.0 Product spec >>> > Series NV - Non vision grilles Grilles Non-vision Recommended for: Wall & door Supply & extract Overview Block line of sight into private areas Giving adequate ventilation
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Handle controlled opening arrester Wilh. Schlechtendahl
More informationstainless steel Cover hinge The cover hinge is simply screwed to the box protection channel and to the edge fold. Model No. KL
aus HB, S. 46 The Rittal range of terminal boxes offers 44 practical designs, developed and improved in constant dialogue with users. Whether with or without gland plates, in stainless steel, EMC version
More informationHS-PORTAL 200 LM Lift and sliding hardware for aluminium doors Hardware information for profile manufacturer
HS-PORTAL 200 LM Lift and sliding hardware for aluminium doors Hardware information for profile manufacturer... with the following benefits: with integrated night vent profile cylinder accessories secure
More informationPolyurethane Notice Boards
NTBD07 Notice Boards Q50 250 Polyurethane Notice Boards Notice Board with Hendon Post and Ball Finial, Whitby Marshalls Street Furniture offer a range of Ferrocast Notice Boards which can be customised
More information09/2011 HAUTAU PRIMAT. for timber, PVC, and aluminium elements
Catalogue 09/2011 HAUTAU PRIMAT for timber, PVC, and aluminium elements HAUTAU Catalogue Fanlight openers HAUTAU PRIMAT 09/2011 HAUTAU GmbH P.O. Box 1151 D 31689 Helpsen Phone +49 05724/393-0 Fax +49
More informationSUPPORT ALU. Aluminium Support ECA ERA EMST ETS.
www.easy-conveyors.com SUPPORT ALU ECA ERA EMST ETS Aluminium Support The conveyors are held in place by a well balanced range of support components, with beam support brackets, support beams, feet, etc.
More informationFrontal Covers 9 º qâ Ê ³ n 9.1
.0 Frontal Covers.1 Furniture handles and knobs Furniture handles combine functionality and design and give a individual and personal touch to each piece of furniture. Häfele provides a huge range of furniture
More information* depending on drive configuration at constant 24/29 V DC without load
Page 1/8 - stand of 02/2016 Very powerful drive. Compact thanks to its horizontally turned guidance tube. Almost all special MEGAMAT 2 equipment can also be used with. This mix of power and diversity makes
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationRittal CM Compact System Enclosures
Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details... 3 5 Compact system enclosures
More information19" chassis F. Downloads and further important information can be found on the Internet under Overview Cabinets...
Overview... 0 Cabinets... 1 19" chassis Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 02192001 Subracks/ 19" chassis... 6 ront panels,
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationTECHNOLOGY IN MOTION MACO. TU.-ON. and T&T FITTINGS. Comfort fittings
TECHNOLOGY IN MOTION MACO multi TU.-ON. and T&T FITTINGS Comfort fittings Installation INSTRUCTIONS 80 kg MACO Key Sash rebate height Sash rebate width Handle position Backset Maximum sash weight Comfort
More information2: Stylebox Stylebox 15 Overview B 2_ Complete Stylebox 15 Kits B 2_ Stylebox 15 Standard Kit B 2_8
2.1 Stylebox 15 Overview 2_3 2.1.1 Complete Stylebox 15 Kits 2_7 2.1.2 Stylebox 15 Standard Kit 2_8 2.2 Stylebox 15 Smart 2_10 2.2.1 Width 2_11 2.2.2 Height ezel 2_11 2.2.3 Depth 2_11 2.2.4 Top Cover Panel
More informationIP65 enclosures orion plus
IP65 enclosures orion plus One system for indoor and outdoor application Sheet steel or glass reinforced polyester - the orion plus enclosures are suited for harshest conditions and can be applied for
More informationHELM Hardware for Sliding Gates. Sliding hardware
HELM Hardware for Sliding Gates Sliding hardware HELM Hardware for Sliding Gates Contents General Information General Information Page 3 Hardware for Sliding Gates General Information, HELM 00 - HELM 700
More informationProduct information. Projecting top hung window fi ttings. Application. Geared handles SPACIO. Materials, surface sealing ferguard*silver
Product information Projecting top hung window fi ttings Application Projecting top hung window fi ttings are primarily designed for use on metall windows and need to be planned for each project individually.
More informationHanging Cabinets & Accessories
.0 Hanging Cabinets & Accessories.1 Blum AVENTOS HK-Stay lift for wooden fronts or wide alu frames Material: Steel mechanism, plastic cover caps Finish: Mechanism galvanized, cover cap grey Adjustment:
More informationAluminium Sliding Door System
Aluminium Sliding Door System This system focuses on modern, sharp lines which are the result of the small radii achieved in the design of the aluminium sections. It allows designers to create distinctive
More informationGTK 80. Technical data
Industrial square suspension system with open cable duct for heavy loads Modular construction with free accessible cable duct Floor, top-mounting or wall exit options Technical data Material: connecting
More informationLocking and Security Information
Information Profile cylinder Locking cylinders are catergorized according to a) Front view b) Side view Profile cylinder Double cylinder Single cylinder Thumbturn cylinder The definition of important components
More informationVisual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page
NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening
More informationDynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
More informationTHIS PAGE LEFT BLANK INTENTIONALLY
THIS PAGE LEFT LANK INTENTIONALLY ARREL EXCHANGE SYSTEM The housings shown on this page all share a common part: an innovative removable barrel. In seconds, and without the need for any special tools,
More informationHS-PORTAL 300 LM Lift and slide hardware for aluminium doors Hardware information for profile manufacturers
HS-PORTAL 300 LM Lift and slide hardware for aluminium doors Hardware information for profile manufacturers... with the following benefits: with integrated night vent profile cylinder accessories secure
More informationTABLE OF CONTENTS SERIES 40
TABLE OF CONTENTS SERIES ALUMINIUM PROFILES SERIES PAGE Technical data and profile cross-sections 2.4-2.17 Processing of profiles for connectors 2.1-2.19 Prices of aluminium profile processing 2. Aluminium
More informationALUMINIUM PROFILE SYSTEM SERIES 40
ALUMINIUM PROFILE SYSTEM SERIES With the basic grid mm (slot 5); mm (slot 6), 16mm, mm and 0mm (slot ). In addition to this, the complete connection technology and a large range of accessories. TABLE OF
More informationZaros Aluminium radiators
4 Zaros VERTICAL (ZAROS V5, ZAROS V100) ZAROS V5 ZAROS V100 return supply ref. nr. 1181000000099 price 14 Fittings, see p. 19 TYPES Vertical: Zaros V5 and Zaros V100 (depth) COLOURS Standard colour S00
More informationargenta opening doors
Door and window fittings Content Table of contents Introduction... 03 Window restrictors... 04 Window handles for aluminium frames... 06 Window handles for wooden frames... 07 Window handles for PVC frames...
More informationFeatures. Marathon SL TECHNICAL CHARACTERISTICS. Sliding bushes: made of friction free and wear free material.
Features TECHNICAL CHARACTERISTICS Fork with Ø30 mm legs with "Double Air" damping system. Adjustment of the air preload (positive air) on both legs. Adjustment of the rebound damping (negative air) on
More information348,6 HE = U Carrying handles, horizontal
T 8,6 Rittal RiCase 69. ( / 9 ) (E) E = U Technical specifications: Depth: 00, 0, 50 Installation width: 69. ( / 9 ) Installation options: 69. ( / 9 ) slide-in equipment and modular assemblies to IEC 60
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
More informationRG75 Catalogue.
RG5 Catalogue 1 www.balkan.gr 2 RG5 Catalogue 1 Catalogue cover 2 Catalogue pages Overview 3 Design Description 4 System Description 5 System Description 6 Design Description Table Composite Profiles,
More informationPATIO AWNINGS HAROL VZ520 TECHNICAL INFORMATION
Page 2 Exploded View VZ520 VZ520 TECHNICAL DATA PATIO AWNINGS HAROL VZ520 Intermediate roller support VZ520 TECHNICAL INFORMATION www.aalta.com.au T 61 02 8065 4911 E info@aalta.com.au A 47A Pine Street,
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Wilh. Schlechtendahl & Söhne GmbH & Co. KG
More informationGUILDFORD Column Display Case with header board and special finials, supplied to Worcester Cathedral
GUILDFORD Column Display Case with header board and special finials, supplied to Worcester Cathedral furnitubes.com 279 DISPLAY CASES & header boards Furnitubes offer a wide choice of display cases, from
More information