HS-PORTAL 200 LM Lift and sliding hardware for aluminium doors Hardware information for profile manufacturer
|
|
- Anis Morrison
- 5 years ago
- Views:
Transcription
1 HS-PORTAL 200 LM Lift and sliding hardware for aluminium doors Hardware information for profile manufacturer... with the following benefits: with integrated night vent profile cylinder accessories secure due to 4 locking points on the drive gear fixed wheels allow simple and easy assembly smooth operation _3_ /0 gedruckt auf chlorfrei gebleichtem Papier Size range Sash width (mm) profile dependent max Sash height (Sliding sash) (mm) profile dependent max Frame width (mm) with Scheme A max Frame height (mm) profile dependent Sash weight (kg) max. 200 Backset (Gear) (mm) 27,5 Handle position (Window) (mm) from top edge running rail 35 Handle position (Door) (mm) from top edge running rail 5 Contents Size range...page 1 Fittings layout...page 2 Parts list...page 3 Profile dependent measurements...page 4 Accessories...Page 5 Fitting detail(i)...page 6 Fitting detail(ii)...page 7 Scheme Options...Page 8 Specifics on scheme C...Page Jigs...Page 10 Assembly instruction Page 1
2 Fittings layout HS-PORTAL 200 LM Hardware Layout Fittings layout Handle Si-line HS 250 internal 2 Rose Si-line HS 250 internal 3 Cover cap Si-line HS Corner drive HS Bogies HS Centre piece 7 Top locking bolt Exec Bottom locking bolt Exec.... Packer 10 Bottom distance block Exec... Distance piece short Exec Countersunk screw M5 x Closing cap 14 Countersunk screw M5 x Sleevenut 16 Stop 17 Dowel pin 6 x Stop 1 Countersunk tapping screw B4,8 x Bottom locking part Scheme G 21 Countersunk screw M6 x Oval head counters.screw B6,3 x Connecting rod 24 Gear HS Portal 200 PZ 7 3 w/o picture: Fixing screw B4,8 (corresp. DIN 782) or M5 (corresp. DIN 65) made of stainless steel, are included in delivery Flexible by optimized packing units Handle Si-line HS 250 internal (1) and Cover cap Si-line HS 250(3) available in white RAL 016 silver si-brown Basic parts (4 to17) in Carton HS-Portal 200 LM (profile dependent) Sash width dependent connecting rod size 150 to 335 (23) Sash height dependent Gear HS-Portal 300 PZ size170, 220 and 260 (24) Page 2
3 Parts list HS-PORTAL 200 LM Hardware Parts list Pos. Pieces A D G C F Materialshorttext RAL016 white Materialnumber silver Si-brown always required Carton Handle Si-line HS 250 A internal Handle Si-line HS 250 internal A Rose Si-line HS 250 internal Cover cap Si-line HS Carton HS-PORTAL 200 LM A consisting of: Corner drive HS 200 VSU HS TS PEUB Bogie HS 200 HS TS PLWB Centre piece PLZB ) 1 1) 3 1) Bag Locking parts HS-LM A ) 1 1) 3 1) Top locking parts A... air gap dependent See page ) 1 1) 3 1) Bottom locking parts A... air gap dependent See page 7 Packer 1 mm / 2 mm airgap dependent See page Bag sash parts HS-LM A Lower distance block A... profile dependent See page Distance piece short A... profile dependent See page Countersunk screw M5 x Closing cap grey Closing cap brown Countersunk screw M5 x Sleeve nut ) 4 1) Stop Bag screws HS-LM A Dowel pin 6 x Screws profile dependent Bag stop consisting of: Stop Counter sunk screw B4,8 x Bag locking parts HS Scheme G consisting of: Locking part bottom Scheme G Countersunk screw M6 x Pan head tap. screw B6,3 x sash width dep Connecting rod Size Length (in mm) FB (in mm) to to to to ash height dep Accessories Gear HS-PORTAL 200 PZ Size Handle pos.(in mm) FH (in mm) to to to 260 PGKB PGKB PGKB PGKB PGKB PGKB PGKB PGKB PGKB Accessories Sliding grip Si-line long Rose Si-line außen long Handle Si-line HS 250, detachable only in conn. with internal rose ) Rose Si-line internal only in conn. with detachable handle ) Actual need; delivery contains further parts. 2) Color RAL 003 white Page 3
4 Profile dependent measurements HS-PORTAL 200 LM Hardware information Profile dependent measurements Distance block(10) and Distance piece, short() 10 DIM F (mm) Execution Distance block Distance piece, short 16 A PDZB A A0 PDZB A PDZB A PDZB A PDZB A PDZB A PDZB A PDZB A PDZB A PDZB Locking bolts (7 and 8) 7 8 DIM E 1) (mm) 1) intermediate sizes with packes of 1 mm and 2 mm possible Execution Top locking bolt Bottom locking bolt 4 A A A X60 8,5 A A A A ,5 A A Packers () for locking bolts Cross section A-B E 22 F E 22 groove size 13 +0,2 groove size 16 +0,2 min. 55 mm cam Ø12/,5 mm long (also available without cam) 1 mm mm Cross section C-D groove size 16 +0, ,5 14,5 groove size 18 +0,2 5 Centre piece (6) for groove size 18 mm Page 4
5 Accessories HS-PORTAL 200 LM Hardware information Accessories 4 2b Handle Si-line HS 250 PZ A0156 internal and external lockable cam Ø12/13 mm long 3a 2 1a min. 55 mm max. 85 mm 3a cam Ø12/,5 mm long 27,5 14, Pos. Pcs per scheme A D G C F Description RAL016 white silver si-brown Handle Si-line HS 250-PZ internal (only in conn. with Si-line HS 250-PZ external) consisting of : A0156 i. u. ex. lockable a Handle Si-line HS 250 PZ internal A Rose Si-line internal 3a Cover cap Si-line HS Handle Si-line HS 250-PZ external A (only in conn. with Si-line HS 250-PZ internal) i. u. ex. consisting of : lockable Handle Si-line HS 250 PZ external A0156 2b Rose Si-line external 3a Cover cap Si-line HS Bag Stop Stop Countersunk tap. screw B4,8 x 70 Page 5
6 Fitting detail(i) HS-PORTAL 200 LM Hardware information Fitting detail(i) Fitting detail(ii) HS-PORTAL 200 LM Beschlag-Information Fitting detail(ii) Sash cover plate (profile dependent) Size x = profile dependent 250 C 1) B 1) A upper edge running rail FH handle pos. from upper edge running rail 35 (windows) 5 (doors) A B 42 Gearbox C Cross section A B see page 7 mark for handle position 80 Cross section C D see page x Distance bar to be mounted on site Ø 12 mm Ø 20 mm with HSS-Bi-Metal-keyhole saw for lower cylinder drilling please fix here with Ø 12-drill Note to jig EB 651-3! 12 Stop (16) Distance pieces need to be assembled on site Stop (on the adjusting rod) needs to be shortened by 12 mm. Stop (16) Ø 12 mm Ø 12 mm ca. 200 ca. 200 D Gear Size A Size B 1) Size C 1) Sash height 2) Gr Gr Gr ) If requested 2 pcs top locking bolts (6) can be used as additional centre lock. The locking points on Gear HS-Portal 300 PZ (23) must be opened. 2) Small deviations possible (profile dependent) Page 6 Page 7
7 Scheme Options HS-PORTAL 200 LM Hardware information Scheme Options DIN left hand or DIN right hand Scheme A Scheme D Scheme G Scheme H Scheme C Scheme F Scheme K Page 8
8 Specifics on scheme C HS-PORTAL 200 LM Hardware information Specifics on scheme C Bottom locking part, scheme G Notes for scheme C: - The locking points are lowered by 4mm Reduce Dim A to C on page 14 by 4 mm - screw a self tapping screw B6,3 x 38 (22) into the frame ~ 50 mm from the sash leading edge above the slave sash [see also page ] - To avoid misoperation of the two leaves, the master and slave sashes should be clearly identified. The sliding doors should only be operated in the following sequence! Opening: first the master [1.], then the slave sash [2.] Closing: first the slave sash [2.], and then the master[1.] Ø 5,2 mm 25 Gear front edge Fitting the locking parts, bottom, Scheme G A B C Mark the running rail 25 mm behind the gear front edge and ctr punch for a csk screw M6 x 20 (21). Pre drill with a Ø 5,2 mm drill. Screw in the locking part for Scheme G, bottom(20) Page
9 Jigs HS-PORTAL 200 LM Hardware information Jigs Materialshorttext Tool Materialnumber Jig EB consisting of: for gear drillings 1 Pos. 1 Bohrlehre EB 651-3* Jig has backset 51; According to profile dependent backset please use distance piece on site Drill: Ø 12 mm Ø 20 mm PABB Pos. 2 Adjusting rod (incl. lower stop ) for EB and EB Lower stop needs to be shortened by 12mm! See page 5 a Centre punch KF for ctr punching the hole for the locking part SIEGENIA-AUBI KG - Hardware and Ventilation Technology P.O. Box Siegen - Germany Phone +4 (0) Fax +4 (0) Page10
HS-PORTAL 300 LM Lift and slide hardware for aluminium doors Hardware information for profile manufacturers
HS-PORTAL 300 LM Lift and slide hardware for aluminium doors Hardware information for profile manufacturers... with the following benefits: with integrated night vent profile cylinder accessories secure
More informationPSK PORTAL 160 PLUS KF
PSK PORTAL 60 PLUS KF Surface TS Parallel tilt and slide hardware for PVCu elements with mm air gap, standard operating sequence Locked position Tilt position... with these decisive advantages: Tilt position
More informationThe following information from the aluminium planning manual must be observed:
ALU 5200-TBT E RC 2 The anti-intruder tilt-and-turn hardware for aluminium windows and French doors. Application for testing according to EN 1627ff RC 2, RC 2 N KPW BD 3,5 BD 5 Size range It is essential
More informationALU 5200-TBT (150 kg)
ALU 5200-TBT (150 kg) FBS Tilt-and-turn hardware for hinge clearance (BD) 5 mm with mishandling device (FBS) on the corner drive (EUL) KPW BD 5 Tilt point horizontal (KPW) Size range It is essential to
More informationPatio doors max. Sash width (mm) 600 to Sash height (mm) 550 to Sash weight (kg) max. 150 max. 150
ALU 5200-D (150 kg) Turn only hardware for hinge clearance (BD) 5 mm BD 5 Size range (depends on hardware) Windows min. max. Patio doors max. Sash width (mm) 600 to 1600 1300 Sash height (mm) 550 to 2000
More informationPatio doors max. Sash width (mm) 365 to Sash height (mm) 550 to Sash weight (kg) max. 100/130 max. 100/130
ALU 5200-D (130 kg) Turn only hardware for hinge clearance (BD) 5 mm BD 5 Size range It is essential to adhere to the details of the system provider. Windows min. max. Patio doors max. Sash width (mm)
More information2 tilt only stays min. max. Sash width (mm) > Sash height (mm) Sash weight (kg) max. 30 kg max.
ALU axxent PLUS-K Concealed tilt-only hardware Size range It is essential to adhere to the details of the system provider. 1 tilt only stay min. max. 2 tilt only stays min. max. Sash width (mm) 400 1020
More informationPatio doors max. Sash width (mm) 380 bis Sash height (mm) 550 bis Sash weight (kg) max. 100/130 max. 100/130
ALU axxent PLUS-DK Concealed turn-and-tilt hardware for frame groove with mishandling device (FBS) on the corner drive (EUL) FBS KPS Tilt point vertical (KPS) Size range It is essential to adhere to the
More informationPSK PORTAL 160 PLUS LM Parallel tilt & slide (PSK) hardware For light metal profiles a cavity of 21 mm
Parallel tilt & slide (PSK) hardware For light metal profiles a cavity of 21 mm Size range _20-02/0 Technical specifications and colours are subject to change Sash width (mm) 00 to 1,650 1) Sash height
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationSliding Door Fittings, Roller Shutters Vertical Sliding Door Fittings
Vertico 16 VF, door weight up to 15 kg, for 2 bi-parting doors Door height: 300 600 mm Door thickness: Min. 16 mm Side panel thickness: Min. 1 mm Running gear: Top and bottom running, 4 rollers, with ball
More informationALU axxent PLUS-DK KPW
ALU axxent PLUS-DK KPW Concealed turn-and-tilt hardware with mishandling device (FBS) on the corner drive (EUL) FBS KPW Tilt point vertical (KPW) Size range It is essential to adhere to the details of
More informationFENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET SCF PVC
FENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION 06.2 Tilt&Turn Hardware UNI-JET SCF PVC Table of Contents 06.2 UNI-JET SCF PVC 06 2 DIRIGENT T&T Handle... 06.2.9 Tilt&Turn Sash...
More informationB12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS
B12 TILT-TURN WINDOWS B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationPORTAL for timber and PVC.
PORTAL for timber and PVC. Technical information: ES, HS, PSK PLUS, PS PLUS, FS PLUS, CS. WINDOW HARDWARE DOOR HARDWARE SLIDING DOOR HARDWARE VENTILATION TECHNOLOGY BUILDING TECHNOLOGY SLIDING DOOR HARDWARE
More informationTECHNOLOGY IN MOTION MACO. TU.-ON. and T&T FITTINGS. Comfort fittings
TECHNOLOGY IN MOTION MACO multi TU.-ON. and T&T FITTINGS Comfort fittings Installation INSTRUCTIONS 80 kg MACO Key Sash rebate height Sash rebate width Handle position Backset Maximum sash weight Comfort
More informationWindow Fittings Sliding/Folding Fittings
Folding window fitting Fold 35 Features For timber door frames For 2- to 6-leaf folding doors Floating suites possible Full corrosion resistant construction, ideal for coastal applications Concealed channel
More informationHAUTAU ATRIUM Alu-HKS 200. for aluminium systems
Catalogue HAUTAU ATRIUM Alu-HKS 200 for aluminium systems HAUTAU Catalogue Tilt and Slide Fittings ATRIUM Alu-HKS 200 2017 Version 08/2017 You will find the latest catalogue version online on www.hautau.de
More informationC12.11 SALTO 4208 C12 SIDE HUNG WINDOWS
C12 SIDE HUNG WINDOWS C12.11 01.07.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More informationC.9.CHRONO INVISI TILT AND TURN
C.9. Contents General characteristics... Base set (standard) n 31117, 31118 and 31119... Selection of rods n 30000-...... Installation instructions... Base set PLUS n 31517, 31518 and 31519 Installation
More informationRoto Patio Alversa. will be available soon. Roto Patio Alversa PS Air. Window and Door Technology
Window and Door Technology Roto Patio Alversa Universal hardware for minimum effort in Parallel Sliding and Tilt&Slide systems Installation, maintenance and operating instructions for aluminium profiles
More informationFrENcH casement windows D11.15 HINGES
D11 French casement windows HINGES 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Hinges Contents 1. General....03
More informationA12.11 SALTO 4008 A12 TURN-TILT WINDOWS
A12 TURN-TILT WINDOWS A12.11 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More informationCatalogue. HAUTAU ATRIUM SP komfort. for timber and PVC elements
Catalogue HAUTAU ATRIUM SP komfort for timber and PVC elements HAUTAU- Catalogue Parallel-Retract-Slide Fittings HAUTAU ATRIUM SP komfort 2015 Version 01/ 2015 You will find the latest catalogue version
More informationSliding Door Fittings, Roller Shutters Folding Sliding Door Fittings
Silent Fold 20/A, door weight up to 20 kg Area of application: For folding doors mounted to the carcase on one side, without running and guide track, for opening and closing the folding doors without blocking
More informationSiegenia Tilt & Turn Hardware Systems
Siegenia Tilt & Turn Hardware Systems Issue 2 Always at your side - the VBH Enhanced Service Package More products. More brands. More choice. Simply everything you need to manufacture and install windows
More informationC.4.CHRONO TILT AND TURN
C.4. Contents General characteristics................... Base set n 31111, 31112 and 31113...... Centre locking set n 30140-30........... Selection of rods n 30000-................ page C.4.2 C.4.5 C.4.6
More informationLift-Slide Hardware for Wood Windows and Doors. Lift-slide hardware. G-U Lift-Slide Hardware Systems: 934, 937, 939. Edition 2007 / B 5.
Lift-Slide Hardware for Wood Windows and Doors G-U Lift-Slide Hardware Systems: 934, 937, 939 Lift-slide hardware Edition 2007 / B.1 Lift-Slide Hardware for Wood Windows and Doors Contents Lift-slide hardware
More informationAccessories (additional charge):
Alurail With Alurail, BOPLA has developed a modular DIN rail enclosure which is especially suitable for use in measurement, control and automatic control technology. Basic profiles, each in eight standard
More informationTHE NEW HARDWARE SYSTEM ALU 540. Roto ALU 540. FB 44-0 GB July 2005 Alu B.U./J.S. (Translation: Prunty 9/05)
THE NEW HARDWARE SYSTEM ALU 540 1 APPLICATION RANGE Hinge-side compatible with all conventional Euro-chamber profiles Clampable hinge-side with preassembled clamp-strips Available for all standard opening
More information09/2011 HAUTAU PRIMAT. for timber, PVC, and aluminium elements
Catalogue 09/2011 HAUTAU PRIMAT for timber, PVC, and aluminium elements HAUTAU Catalogue Fanlight openers HAUTAU PRIMAT 09/2011 HAUTAU GmbH P.O. Box 1151 D 31689 Helpsen Phone +49 05724/393-0 Fax +49
More informationG11.11 INVISITOP FOR BOTTOM HUNG WINDOWS
G11 FAN LIGHT WINDOWS G11.11 50141 FOR BOTTOM HUNG WINDOWS 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationAssembly instructions PORTAL. SOFT CLOSE with guiding rail SC001 Timber. Window systems Door systems Comfort systems
PORTAL HS SOFT CLOSE with guiding rail SC001 Timber Window systems Door systems Comfort systems Contents General... 4 Target group of this documentation... 4 Intended use... 4 Safety notes... 4 Directives
More informationB.1.CHRONO SIDE HUNG OPEN IN WINDOWS
B.1. SIDE HUNG OPEN IN Contents General characteristics................... page B.1.2 Base set n 20110...................... B.1.4 Centre locking sets n 30140-800 and 20140-35..........................
More informationLocks and Catches Information
Information SYMO 3000 is the worldwide unique furniture locking system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum expenditure and effort. The
More informationSINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS
SINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS SINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS MANET CONTENT MANET CONCEPT Sliding door system 6 21 Pivoting door system 22 35 Connection system 36 43
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationC.3 CHRONO MISCELLANEOUS. Contents. turn-tilt- and tilt-turn window
C.3 Turn-tilt and tilt-turn windows CHRONO MISCELLANEOUS Contents 1. Night vent device n 30140-861 C.3.02 1.1. General C.3.02 1.2. Profile dimensions C.3.02 1.3. Operation C.3.03 1.4. Air flow C.3.03 1.5.
More informationOriginal operating instructions DRIVE. DRIVE axxent DK. Concealed motion chain drive. Window systems Door systems Comfort systems
Original operating instructions DRIVE Concealed motion chain drive. Window systems Door systems Comfort systems Original operating instructions Contents 1. Information... 4 2. Installation... 8 3. Commissioning...18
More informationHAUTAU ATRIUM HS und Alu-HS. for timber, PVC, and aluminium elements
Catalogue HAUTAU ATRIUM HS und Alu-HS for timber, PVC, and aluminium elements HAUTAU Catalogue Lift and Slide Fittings HAUTAU ATRIUM HS HAUTAU ATRIUM Alu-HS 2015 Version 12/ 2015 You will find the latest
More informationthat move you. The PORTAL hardware product range: because the easiest way to move heavy sliding elements is with intelligent solutions.
Innovation is the ey to ideas that move you. The PORTAL hardware product range: because the easiest way to move heavy sliding elements is with intelligent solutions. Window hardware door hardware sliding
More informationATRIUM Alu-HKS 160 S. Mounting instructions. Contents
05/2016 233596G Mounting instructions t L* *HAUTAU version Left = IN EN 12519 Right (right-opening) R* *HAUTAU version Right = IN EN 12519 Left (left-opening) The figures within these mounting instructions
More informationCATALOG. Multi-Point Locks And Accessories
CATALOG Multi-Point Locks And Accessories General Information Stefan Fliether, CEO and partner For many years KFV has represented much more than just high-quality door locks and multi-point locking mechanisms.
More informationTURN-TiLT WiNDOWs A11.16 CHRONO ACCessORies
A11 TURN-TILT WINDOWS A11.16 CHRONO Accessories 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. Window stay
More informationSLIDING DOOR AND WINDOW SYSTEM WITH THERMAL BREAK
SLIDING DOOR AND WINDOW SYSTEM WITH THERMAL BREAK Е70 WINDOW AND DOOR SYSTEM WITH THERMAL BREAK TABLE OF CONTENTS GENERAL INFORMATION page 9 BUILDING PHYSICS page 17 TABLES page 25 PROFILES page 31
More informationTable of contents. Small cases:
R Firmengruppe Table of contents Small cases: Small case x-dream 418......................... III 3 Small case Tarex 419............................ III 5 Small case Profi-case 415/416....................
More informationRoto Patio Life. Window and door technology. Standard hardware for large Lift&Slide doors up to 300 kg
Window and door technology Roto Patio Life Standard hardware for large Lift&Slide doors up to 300 kg Installation, Maintenance and Operation instructions for VEKASLIDE system Imprint Copyright: September
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationSliding Door Fittings, Roller Shutters
Sliding Door Fittings, Roller Shutters Contents Sliding Timber Door Fittings Finetta Flatfront Foldfront Mobilus Classic Sliding door system Automatic sliding door system Planomix Planofit Straightening
More informationStirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
More informationLocks. Product range:
Locks Product range: Coin Locks Combination Locks Espagnolette Locks Keys Lay on Locks Locks for Metal Furniture Lock Strikers Mortise Locks Padlock Handle Pedestal Locks Removable Cylinder Locks Rim Locks
More informationTECHNOLOGY IN MOTION MACO MULTI-TREND TU.-ON. AND T&T FITTINGS. Installation instructions TIMBER WINDOWS
TECHNOLOGY IN MOTION TU.-ON. AND T&T FITTINGS Installation instructions TIMBER WINDOWS System designation: TO > Single routing DT > Double routing AS > Face fix fittings Note about surfaces fittings are
More informationthat move you. The PORTAL hardware product range: because the easiest way to move heavy sliding elements is with intelligent solutions.
Innovation is the ey to ideas that move you. The PORTAL hardware product range: because the easiest way to move heavy sliding elements is with intelligent solutions. Winwow hardware door hardware sliding
More informationCONTENT. Section. Introduction. Introduction. Hinges. Gears. Corner transmissions/ Middle locks/ Extensions. Stay arms. Additional elements
塑钢窗配件 Section Introduction CONTENT Introduction 1 Hinges 2 Gears 3 Corner transmissions/ Middle locks/ Extensions 4 Stay arms 5 Additional elements 6 Hardware set combinations 7 Tools / Instalation/ Adjustments
More informationSliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings
Ultra 20 Swing Door fitting, door weight up to 20 kg Area of application: Door swings out to the front and to the side when being opened, allowing unlimited access to the cabinet interior, can be used
More informationConstruction 1 (1 set) Construction 2 (1 set) Construction 3 (1 set) Construction 4 (1 set)
MANET COMPACT Sets MANET COMPACT Sets The aesthetic elegance of the MANET COMPACT concept is also available in the form of standardised sets for simple, fast planning of the more popular system types with
More informationEvidence of Performance Burglar resistance
Test Report No. 16-001785-PR03 (PB-C01-05-en-01) Client ALUMIL S.A. Industrial Area 61100 Kilkis Greece Product Burglar resistant Smart SD77 glass door RC 2 Designation SMART DOORS Overall dimensions (W
More informationF11.13 FRICTION HINGES F11 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS
F11 AND TOP HUNG WINDOWS F11.13 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General information...f11.13.03
More informationLOCK LOCK = PHILLIPS / POZIDRIV = HEXAGONAL SOCKET = BLADE SLOT = COMBI SLOT = COUNTERSUNK HEAD = PAN HEAD = FLAT HEAD = FLAT HEAD = FLANGE HEAD
LEVELLERS SYMBOLS AND FINISHES LEGEND SYMBOLS AND FINISHES LEGEND SYMBOLS SYMBOLS SYMBOLS = SHELF SAFELY LOCKED DURING TRANSPORTATION AND AT HOME. = SHELF = SAFELY SHELF LOCKED SAFELY LOCKED DURING DURING
More informationPlease ask your local representative for your individual front panel design. You find your contact person on our home-page
Front Panels In addition to the wide range of standard front panels we also provide on request individual customer specific custom front panels with punching, surface finish and silk screening. Textured
More informationYale Revolution Window Hinge Product Overview
Page 001 Product Overview PRODUCT FEATURES Can be fitted to all standard fully reversible profiles (32mm x 12mm). Quick and easy to install in: PVC Aluminium Timber 27 module sizes covering sash heights
More informationMULTI ZERO locking hook for zero barrier threshold systems
TECHNOLOGY IN MOTION www.maco.eu ASSEMBLY INSTRUCTIONS MULTI ZERO locking hook for zero barrier threshold systems Only for use by certified specialists! Not for end users! TILT AND TURN HARDWARE Key Sash
More informationPRODUCT CATALOGUE 01/2018. PVC-U/wood/alu. paniclock. Emergency exit and anti-panic solutions. winkhaus.de
PRODUCT CATALOGUE 01/2018 PVC-U/wood/alu paniclock Emergency exit and anti-panic solutions winkhaus.de 2 Emergency exit and anti-panic solutions PRODUCT CATALOGUE 01/2018 paniclock An emergency? Don t
More information» Fermentation and storage tank base tank FS-MO stacking tank AS-MO
» Fermentation and storage tank base tank FS-MO stacking tank AS-MO The FS-MO base tank is a typical, round, upright standing fermentation and storage tank made of high quality stainless steel. Together
More informationRoto Patio S Standard hardware for Tilt&Slide windows and doors
Window and Door Technology Roto Patio S Standard hardware for Tilt&Slide windows and doors Installation, maintenance and operation instructions for timber and PVC pro les Imprint Copyright: September 2015
More informationTechnical manual for ordering and installation DORMA MANET. Single-point fixings for interior applications
Technical manual for ordering and installation DORMA MANET Single-point fixings for interior applications MANET Glass design system DORMA MANET Today s approach to office design tends to be generously
More informationLINK OPENING SYSTEM OPENING SYSTEMS FOR FLAP AND DROP DOWN DOORS
LINK OPENING SYSTEM OPENING SYSTEMS FOR SYMBOLS AND FINISHES LEGEND SYMBOLS = SHELF SAFELY LOCKED DURING TRANSPORTATION AND AT HOME. LOCK = ANTI-TURNOVER LOCKING SYSTEM = NORMS / PATENTS = PHILLIPS / POZIDRIV
More informationASSEMBLY INSTRUCTIONS. Electro-mechanical systems. GENIUS 2.1 A and B
ASSEMBLY INSTRUCTIONS KFV Electro-mechanical systems GENIUS 2.1 A and B Contents GENIUS 2.1 A and B Contents 1. Introduction............................................................................
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationWelcome to BOPLA City! ENCLOSURE SERIES
Welcome to BOPLA City! ENCLOSURE SERIES Welcome to BOPLA City! By introducing INTERTEGO, Bopla is adding a medium-sized series to its range of desktop enclosures. Two of INTERTEGO s main features are its
More informationOCTAWALL 60 HYBRID ONE SOLUTION. FOR FABRIC AND PANELS. THE ALL-ROUNDER W 735R.
OCTA WALL 60 HYBRID OCTAWALL 60 HYBRID ONE SOLUTION. FOR FABRIC AND PANELS. THE ALL-ROUNDER W 735R. EXAMPLE FITTING: Because it's your decision if you want fabric or panels. OCTAwall 60 Hybrid means more
More informationSmart Visofold 1000 Series Bi Fold Door System
Smart Visofold 1000 Series Bi Fold Door System 1 P a g e Smart Visofold 1000 Series - Recommended Design Limitations Minimum Sash Width Maximum Sash Width Maximum Sash Height Maximum Sash Weight 700mm
More informationMODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC
MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC ... 3... 4 3000 rpm 50 Hz / 3600 rpm 60 Hz... 4... 5... 7 Modular pump / motor systems... 7 Materials...........................................................
More informationOverview Page Page Page Page Page Page 283.
281 299 302 304 305 306 Lockable window handles designed for single profile cylinders Window locks Budget lock roses Fittings for lifting/sliding doors Overview 34 1003 Page 282 34 1004 Page 282 34 1005
More information2: Ecokit Ecokit 11 Overview A 2_ Ecokit 11 Sub Rack Configuration A 2_ Width A 2_ Height / Depth A 2_6
2: Ecokit 11 2.1 Ecokit 11 Overview 2_3 2.2 Ecokit 11 Sub Rack Configuration 2_5 2.2.1 Width 2_5 2.2.2 Height / Depth 2_6 2.2.3 Handles 2_6 2.2.4 Line Drawing 2_7 2.3 daptation Kits 2_8 2.3.1 daptation
More informationFSB plug-in handles for timber and metal windows
FSB plug-in handles for timber and metal windows What a difference less can make! With its radically pared-down rose, the FSB plug-in handle is ideal for nearly any window profile whether timber or metal.
More informationHinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
More informationMANET COMPACT Sets. Content Pivoting door 40 Sliding door 44
MANET COMPACT Sets Content Pivoting door 40 Sliding door 44 MANET COMPACT Sets MANET COMPACT Sets The aesthetic elegance of the MANET COMPACT concept is also available in the form of standardised sets
More informationC13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationMACO DOOR LOCKS TECHNOLOGY IN MOTION
TECHNOLOGY IN MOTION DOOR LOCKS Retracting Latch Gentle and smooth engagement of the latch ensuring an easy latching operation. The plastic retracting arm does not damage the latch plate. Fully reversible
More informationStorage Fittings 1 º q µ ³ ³ Â É 1.1
1.0 Storage Fittings 1 1.1 1 ARENA Plus anti-slip finish welcome to the quiet kitchen Kesseböhmer developed the special ARENA Plus coating which prevents pots and pans, crockery and groceries slipping
More informationWE OPEN SPACE. Roto NT. Tilt & turn hardware. K, A and R hinges Tilt first parts catalogue & fitting instructions
WE OPEN SPACE Roto NT Tilt & turn hardware K, A and R hinges Tilt first parts catalogue & fitting instructions 01-09 Roto NT Index Product liability guidelines 4 General design description 5 Roto NT K
More informationCabinets PROLINE. Modifications. Overview Cabinets Climate Control Cases Subracks/ 19" chassis Modules...
Overview... 0 Cabinets Cabinets... 1 Climate Control... 2 Cases... 3 Subracks/ 19" chassis... 4 Modules... 5 41003002 Systems... 6 Power supply units... 7 Backplanes... 8 41096005 41096010 Grid Assembly
More informationNo e This is a translation of Test Report Summary dated 23 April 2007.
Test Report Summary Resistance to wind load, Watertightness, Air permeablilty, Operating forces,mechanical propertiels, Mechanical durabilty, Load-bearing capacity of safety devices No 101 32274e This
More informationLinear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
More informationTEXT OCTAWALL MOBIL. ATTRACTION. exhibition systems. presentation systems
TEXT OCTAWALL MOBIL. A mobile wall with magnetic ATTRACTION. exhibition systems presentation systems 9 2 If walls could speak they would recommend o c t a w a l l! The reason: the new WALL system provides
More informationEA patch fittings for offset hung doors in toughened glass assemblies 56. Top centres for wood and steel frames 58. Glass preparation details 60
EA General information 50 EA patch fittings for offset hung doors, 24 mm frame stop depth EA patch fittings for offset hung doors, various frame stop depths 54 EA patch fittings for offset hung doors in
More informationKicking plates Ventilation plates Ventilation grills Perforated plates
Kicking plates Ventilation plates Ventilation grills Perforated plates 9c Technical Information Kicking plates Finger plates Measurement details of perforation Perforated Plates Ventilation plates Ventilation
More informationwww.hafeleindia.com www.hafeleindia.com STILE DOOR HARDWARE BY HAFELE An office that is too noisy can be unnerving. With the popularity of predominantly open commercial spaces, there is a growing need
More informationoctawall mobil A mobile wall with magnetic attraction
mobil A mobile wall with magnetic attraction exhibition systems interior design systems presentation systems cleanroom systems software and service if walls could speak - they would recommend mobil! The
More informationWindow Locking 10YEAR. whitco.com.au
Window Locking 10YEAR whitco.com.au Contents CYL4 Push Lock CYL4 Mini Push Lock CYL4 Multi Bolt CYL4 Patio Bolt page 4 page 6 page 7 page 8 CYL4 Window Bolt CYL4 Mini Window Bolt Keyed Sash Lock Safety
More informationRC2 B11.09 CHRONO SAFE (RC2) B11 TILT-TURN WINDOWS
B11 TILT-TURN WINDOWS RC2 B11.09 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More informationQuarter-turn locks, compression latches
Quarter-turn locks, compression latches 435 K0518 Quarter-turn locks small version 2,5 13,5 4,5 SW 20 Ø20 max. 5 Ø16,2 14,2 Housing and actuator die-cast zinc. Housing and actuator chrome-plated. Wing-handle
More informationFor further assistance, call
PANIC & EMERGENCY EXIT DOORS Inside: - Strand Face Fit Panic Bar - Strand Face Fit Panic Pad - Fuhr Concealed Panic Bar Locks - Master & Slave - Outside Access Kit for Face Fitting & Concealed Panic Bars
More informationSeries 2000 Entrance Door Price List
Series 2000 Entrance Door Price List 02.04.2018 Hörmann United Kingdom Hörmann (UK) Limited Gee Road Coalville Leicestershire LE67 4JW Phone: 01530 513000 Fax: 01530 513001 info@hormann.co.uk Leicestershire
More informationAccessories. The extensive accompaniment for glass doors.
The extensive accompaniment for glass doors. CONTENTS Materials and surface finishes 138 Product information Door rails 139-140 Door holders 141 Hinges - special applications 142 Door stop and strike plates
More informationSystem Test Report Fitness for Use and Durability
System Test Report Fitness for Use and Durability No. 101 29257e This is a translation of System Test Report No. 101 29257 dated 22 February 2006. Client Product/Component aluplast GmbH PVC-profiles Auf
More informationGuidelines to.. Door Locking System Repair
Centre Equipment & EMR March 2014 Guidelines to.. Door Locking System Repair Document Reference: CENEMR/2014/003/MRS046 Version 1.0 Contents Locking Gear Components Other Door Components Anti-Theft Points
More informationVersatile, intelligent and comfortable For every problem, there is a suitable Accessory
Versatile, intelligent and comfortable For every problem, there is a suitable Accessory Label Cases... 46 Bolts... 55 Label cases LA-NP-... grey Label case for NP and NP-B, self-adhesive runner for insertion
More informationTavlesystemdele Tav T l av es l y es s y t s em em e d l e e Indholdsfortegnelse Indho ndho d l s d f s or f t or e t g e ne g l ne s l e T
Catalogue 2014 Tabula Catalog 2014 Table of Contents Table of Contents Switchboard System Parts Article umber Index 2014 - Tabula Switchboard System Parts Section: Group: Section: Group: Section: Group:
More information