No e This is a translation of Test Report Summary dated 23 April 2007.
|
|
- Marjorie Hudson
- 6 years ago
- Views:
Transcription
1 Test Report Summary Resistance to wind load, Watertightness, Air permeablilty, Operating forces,mechanical propertiels, Mechanical durabilty, Load-bearing capacity of safety devices No e This is a translation of Test Report Summary dated 23 April 2007 Product/Component aluplast GmbH Kunststoffprofile Auf der Breit 2 System designation IDEAL Karlsruhe Windows and casement doors of the following types of opening: Tilt, tilt and turn, fixed and double with opening central meeting stile (overlapping design), and parallel tilting sliding casement door Frame material PVC-U/white Basis EN : , Windows and external pedestrian doorsets Product standard Test standards: EN 1026 : EN 1027 : EN : EN : EN : EN : EN 1191 : RAL-RG 607/3 Representation System description Extract see Annex 3 Specimens 2 5 from profiles as per EN 12608, Class B (wall thickness of projected areas 2,5 mm, of concealed areas 2,0 mm) Special features Test specimen Representation Window size in mm 1384 x x x x x 2206 Test Classification EN EN Resistance to wind load C4 / B4 C4 C3 / B3 C4 / B4 C4 / B4 Watertightness E 900 E 1050 E 750 E 750 E 900 Instructions for use The present test report serves to demonstrate the above characteristics of windows according to EN : EN EN EN EN EN Air permeability Operating forces Mechanical properties Machanical durability Impact resistance 3* * This characteristic was tested exemplarily with test specimen 2 Load-bearing Requirement Requirement Requirement Requirement capacity of safety devices fulfilled fulfilled fulfilled fulfilled ift-guideline FE-06/1 (August 2005) Testing mechanical and butt-welded T-joints of PVC windows " Reveal and rebate hindrance test - Testing as per RAL-RG 607/3: Quality regulations and test specifications for side-hung and tilt and turn hardware ift Rosenheim 25 September 2007 Jörn Peter Lass, Dipl-Ing (FH) Head of Testing Department ift Centre Windows & Facades Robert Kolacny, Dipl-Ing (FH) Test engineer ift Centre Windows & Facades Requirement fulfilled Requirement fulfilled Requirement fulfilled Validity The test results can be extrapolated acc to the transfer matrix (Article 2) The effects of ageing and weathering have not been covered Notes on publication The ift Guidance Sheet "Conditions and Guidance for the Use of ift Test Documents" applies Contents The report comprises a total of 69 pages Annex 1: Relevant evidence/reports Annex 2: Transfer matrix Annex 3: Extract from system description Annex 4: Significant system features
2 Annex 1 Relevant evidence / reports Page 1 of 2 Test report summary e, dated 25 September Relevant evidence/reports No Representation Product type Approval by test evidence / reports/ expert statements 1 Test product Window unit: Tilt and turn casement with glassseparating cross bars (top) and fixed sublight (with mechanical transom connection) Overall dimensions (B x H) 1384 mm x 2206 mm 2 Test product Single-leaf tilt and turn casement door Overall dimensions (B x H) 874 mm x 2374 mm Report /2 dated 23 April 2007 The test results can be extrapolated acc to the transfer matrix (point 2) Observe tabled sizes of system description Report /3 dated 23 April 2007 The test results can be extrapolated acc to the transfer matrix (point 2) Observe tabled sizes of system description 3 Test product Double side-hung and tilt and turn window with opening central meeting stile (overlapping design) Overall dimensions (B x H) 1492 mm x 2184 mm 4 Test product Single leaf parallel tilting sliding door (PSK) Overall dimensions (B x H) 2630 mm x 2404 mm Report /4 dated 23 April 2007 The test results can be extrapolated acc to the transfer matrix (point 2) Observe tabled sizes of system description Report /5 dated 23 April 2007 The test results can be extrapolated acc to the transfer matrix (point 2) Observe tabled sizes of system description 5 Test product Window unit: Tilt and turn casement with glassseparating cross bars (top) and fixed sublight (with mechanical transom connection) Overall dimensions (B x H) 1384 mm x 2206 mm Report /1 dated 23 April 2007 The test results can be extrapolated acc to the transfer matrix (point 2) Observe tabled sizes of system description
3 Annex 1 Relevant evidence / reports Page 2 of 2 Test report summary e, dated 25 September Test product Test specimen to check mechanical mullion connection Overall dimenions (B x H) 1200 mm x 1200 mm Report dated 11 July 2006 The specified requirements of the Guideline for testing the mechanical joints of PVC windows (FE-06/1) were fulfilled Evidence of suitability applies to those product types specified in the type list that are described in detail in the relevant evidence/reports The type list specifies the permitted design variants The present evidence of suitability does not allow any statement to be made on further characteristics of the present structure regarding performance and quality
4 Annex 2 Transfer matrix Page 1 of 3 Test Report Summary e, dated 25 September Transfer matrix
5 Annex 2 Transfer matrix Page 2 of 3 Test Report Summary e, dated 25 September 2007
6 Annex 2 Transfer matrix Page 3 of 3 Test Report Summary e, dated 25 September 2007
7 Page 1 of 61 Test report summary e, dated 25 September Main profiles
8 Page 2 of 61 Test report summary e, dated 25 September 2007
9 Page 3 of 61 Test report summary e, dated 25 September 2007
10 Page 4 of 61 Test report summary e, dated 25 September 2007
11 Page 5 of 61 Test report summary e, dated 25 September 2007
12 Page 6 of 61 Test report summary e, dated 25 September 2007
13 Page 7 of 61 Test report summary e, dated 25 September 2007
14 Page 8 of 61 Test report summary e, dated 25 September 2007
15 Page 9 of 61 Test report summary e, dated 25 September 2007
16 Page 10 of 61 Test report summary e, dated 25 September 2007
17 Page 11 of 61 Test report summary e, dated 25 September 2007
18 Page 12 of 61 Test report summary e, dated 25 September 2007
19 Page 13 of 61 Test report summary e, dated 25 September 2007
20 Page 14 of 61 Test report summary e, dated 25 September 2007
21 Page 15 of 61 Test report summary e, dated 25 September 2007
22 Page 16 of 61 Test report summary e, dated 25 September 2007
23 Page 17 of 61 Test report summary e, dated 25 September 2007
24 Page 18 of 61 Test report summary e, dated 25 September 2007
25 Page 19 of 61 Test report summary e, dated 25 September 2007
26 Page 20 of 61 Test report summary e, dated 25 September 2007
27 Page 21 of 61 Test report summary e, dated 25 September 2007
28 Page 22 of 61 Test report summary e, dated 25 September 2007
29 Page 23 of 61 Test report summary e, dated 25 September 2007
30 Page 24 of 61 Test report summary e, dated 25 September 2007
31 Page 25 of 61 Test report summary e, dated 25 September Reinforcement sections
32 Page 26 of 61 Test report summary e, dated 25 September 2007
33 Page 27 of 61 Test report summary e, dated 25 September 2007
34 Page 28 of 61 Test report summary e, dated 25 September 2007
35 Page 29 of 61 Test report summary e, dated 25 September 2007
36 Page 30 of 61 Test report summary e, dated 25 September 2007
37 Page 31 of 61 Test report summary e, dated 25 September 2007
38 Page 32 of 61 Test report summary e, dated 25 September 2007
39 Page 33 of 61 Test report summary e, dated 25 September Seals/Gaskets
40 Page 34 of 61 Test report summary e, dated 25 September 2007
41 Page 35 of 61 Test report summary e, dated 25 September 2007
42 Page 36 of 61 Test report summary e, dated 25 September 2007
43 Page 37 of 61 Test report summary e, dated 25 September 2007
44 Page 38 of 61 Test report summary e, dated 25 September 2007
45 Page 39 of 61 Test report summary e, dated 25 September Glazing tables
46 Page 40 of 61 Test report summary e, dated 25 September Blocks
47 Page 41 of 61 Test report summary e, dated 25 September 2007
48 Page 42 of 61 Test report summary e, dated 25 September 2007
49 Page 43 of 61 Test report summary e, dated 25 September 2007
50 Page 44 of 61 Test report summary e, dated 25 September 2007
51 Page 45 of 61 Test report summary e, dated 25 September Drainage / Ventilation
52 Page 46 of 61 Test report summary e, dated 25 September 2007
53 Page 47 of 61 Test report summary e, dated 25 September 2007
54 Page 48 of 61 Test report summary e, dated 25 September 2007
55 Page 49 of 61 Test report summary e, dated 25 September 2007
56 Page 50 of 61 Test report summary e, dated 25 September Overlapping design
57 Page 51 of 61 Test report summary e, dated 25 September T-joints
58 Page 52 of 61 Test report summary e, dated 25 September 2007
59 Page 53 of 61 Test report summary e, dated 25 September Data referring to maximum casement sizes
60 Page 54 of 61 Test report summary e, dated 25 September 2007
61 Page 55 of 61 Test report summary e, dated 25 September 2007
62 Page 56 of 61 Test report summary e, dated 25 September 2007
63 Page 57 of 61 Test report summary e, dated 25 September 2007
64 Page 58 of 61 Test report summary e, dated 25 September 2007
65 Page 59 of 61 Test report summary e, dated 25 September 2007
66 Page 60 of 61 Test report summary e, dated 25 September 2007
67 Page 61 of 61 Test report summary e, dated 25 September 2007
68 Annex 4 Significant system features Page 1 of 2 Test report sumary e dated 25 September Significant system features Frame/casement members Frame profiles Profile connections Tested main profiles: Frame members , , , Casement members: , , , Overlap profile T-Profile: , Frame and casement members mitred and welded T-connection see Annex 3 Rebate design Air gap12 + 1,5, 12 0,5 Rebate seal Rebate drainage coextruded, TPE, with casement and/or frame members mitrewelded, EPDM gaskets factory-fitted in one continuous length around the corner without mitre and butt-jointed at the top and bonded internally and externally via offset slots, min diameter 5 mm x 25 mm, 50 mm offset to external slots Slots spaced at a max distance of 700 mm, frame member drainage towards outside through 2 slots each Testing was performed with slots of diameter 5 mm x 30 mm and frame member drainage through 3 slots each Pressure equalization External rebate seal notched at top over 2 x 50 mm (see individual test reports), observe requirements of system description Reinforcement Distance of srew connections approx 10 mm Distance of internal mitre Cover size White profile: approx 350 mm White casement member: approx 300 mm Hardware Make* Fixing Tested with Roto NT, Roto Frank AG Euro Jet, Gretsch Unitas GmbH Autopilot, Winkhaus Technik GmbH PSK Portal 200 ZS, Siegenia Aubi KG The hardware faceplate is fixed with screws Ø 4,2 mm inserted through a PVC-wall * if different makes of hardware are used, provide evidence of suitability acc to EN et seq and DIN EN 1670
69 Annex 4 Significant system features Page 2 of 2 Test report sumary e dated 25 September 2007 Corner pivots are fixed by introducing 3 screws Ø 4,2 mm into the reinforcement section and 1 screw of Ø 4,2 mm into the PVC profile The strike plates are fixed by introducing screws of Ø 4,2 mm through a PVC - wall Maximum locking distance The casement pivot is fixed by introducing screws of Ø 4,2 mm through three PVC - walls 860 mm Glazing Insulating glass unit External glazing gasket Coextruded rebate seal, TPE, welded to frame member and factory-fitted EPDM-gaskets Internal glazing gasket Glazing beads with coextruded TPE gaskets, mitred glazing beads Vapour pressure equalization The glazing rebate is ventilated horizontally at the top and bottom by a minimum of two offset slots of 5 mm x 20 mm Testing was performed with slots of 5 mm x 30 mm * if different makes of hardware are used, provide evidence of suitability acc to EN et seq and DIN EN 1670
System Test Report Fitness for Use and Durability
System Test Report Fitness for Use and Durability No. 101 29257e This is a translation of System Test Report No. 101 29257 dated 22 February 2006. Client Product/Component aluplast GmbH PVC-profiles Auf
More informationEvidence of Performance Burglar resistance
Test Report No. 16-001785-PR03 (PB-C01-05-en-01) Client ALUMIL S.A. Industrial Area 61100 Kilkis Greece Product Burglar resistant Smart SD77 glass door RC 2 Designation SMART DOORS Overall dimensions (W
More informationSchüco product performance certificate Aluminium sliding systems Schüco ASS 70 FD
Schüco product performance certificate Aluminium sliding systems Schüco In accordance with EN 14351-1 : 2006-03 MB1007818_EN-01 Valid until 31.12.2014 Schüco 1 Schüco product performance certificate Aluminium
More information12. Miscellaneous Changes in Packaging Units Catalogue Update Service Info-Point No. 55 May 2017 Page 1 of 16
INFO-POINT 55 MAY 2017 INNOVATIONS 1. Approval Extended for HUECK Lava 77-30, F30 Glazing... 2 2. Expansion Joint Gasket Z922050... 3 3. New Rebate Gasket for HUECK Lambda WS 075 / WS 090... 4 CHANGES
More informationRG75 Catalogue.
RG5 Catalogue 1 www.balkan.gr 2 RG5 Catalogue 1 Catalogue cover 2 Catalogue pages Overview 3 Design Description 4 System Description 5 System Description 6 Design Description Table Composite Profiles,
More informationUw = 0.66W/m²K Uf = 0.77 W/m²K Ug = 0.50 W/m²K
Uw = 0.66W/m²K Uf = 0.77 W/m²K Ug = 0.50 W/m²K Innovation is often spoken about, but very rarely delivered. Comar 0 offers a new departure, a Passivhaus certified product with U values as low as 0.66 coupled
More informationSchüco SkyLine S 65. Glazing beads and cover caps. Glazing beads. Cover caps. Glazing, gaskets and. Art. No. pol. total. Art. No. pol.
Glazing beads and cover caps Glazing beads Circumf. (mm) pol. total 336 410 57 149 Circumf. (mm) pol. total 336 420 106 208 Circumf. (mm) Cover caps pol. total 336 430 79 167 Circumf. (mm) pol. total 336
More informationEvidence of Performance Airborne sound insulation of flat roofs
Evidence of Performance Test Report No. 15-002251-PR01 (PB X03-F01-04-en-01) Client Product Designation Knauf Insulation, D.O.O. Trata 32 4220 Skofja Loka Slovenia Flat roof as green roof Urbanscape Green
More informationFlexible, convenient and economic solutions with tilt-turn fi ttings EURO-JET. Tilt-turn and side hung fittings EURO-JET
Tilt-turn and side hung fittings EURO-JET The G.U programme for timber and PVC windows and patio doors Flexible, convenient and economic solutions with tilt-turn fi ttings EURO-JET Tilt-turn and side hung
More informationEvidence of performance Reduction of impact sound pressure level by floor coverings
Evidence of performance Reduction of impact sound pressure level by floor coverings Test report No. 14-003029-PR01 (PB X3.1-F03-04-en-01) Client Product Getzner Werkstoffe GmbH Herrenau 5 6706 Bürs Austria
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Wilh. Schlechtendahl & Söhne GmbH & Co. KG
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Handle controlled opening arrester Wilh. Schlechtendahl
More informationArte. Possibilities. Architecture for the future. Endless. Standard Profiles Nunc Et Orci Morbi Posuere. Arte Profiles Options. Arte Window Options
Possibilities Arte Endless Architecture for the future Standard Profiles Nunc Et Orci Morbi Posuere Arte Profiles Options Page 4 Arte Window Options Arte Door Options Page 13 Page 25 Table of Contents...
More informationFENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET SCF PVC
FENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION 06.2 Tilt&Turn Hardware UNI-JET SCF PVC Table of Contents 06.2 UNI-JET SCF PVC 06 2 DIRIGENT T&T Handle... 06.2.9 Tilt&Turn Sash...
More informationSLIDING DOOR AND WINDOW SYSTEM WITH THERMAL BREAK
SLIDING DOOR AND WINDOW SYSTEM WITH THERMAL BREAK Е70 WINDOW AND DOOR SYSTEM WITH THERMAL BREAK TABLE OF CONTENTS GENERAL INFORMATION page 9 BUILDING PHYSICS page 17 TABLES page 25 PROFILES page 31
More informationSOLEAL HIGH PERFORMANCE DOOR. Architect agency: A+ Architecture Photo Marie-Caroline Lucat
SOLEAL HIGH PERFORMANCE DOOR Architect agency: A+ Architecture Photo Marie-Caroline Lucat SOLEAL / DOORS AND 65 MM, A COMPLETE OFFER A CHOICE OF SOLUTIONS Modules depth of and 65-mm permit realisation
More informationMULTI ZERO locking hook for zero barrier threshold systems
TECHNOLOGY IN MOTION www.maco.eu ASSEMBLY INSTRUCTIONS MULTI ZERO locking hook for zero barrier threshold systems Only for use by certified specialists! Not for end users! TILT AND TURN HARDWARE Key Sash
More information0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table
Type overview FSR with guide cables or rods Type key FSR P S 0 0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table Cover panel without back-fold: S = small,
More information37, gr/m 46,8 24,8 48,8 73,8 73, gr/m 93,9 71, gr/m 93,9 71, gr/m 71,4 88,9 39,9
SERIES 42,5,6 57,2 35,2 46,8,8 57,2 35,2 46,8 375 0005 580 gr/m 375 0006 2 gr/m 375 00 6 gr/m 375 0035 819 gr/m 73,6 51,6 84 62 57,2 35,2 48,8 48,8 73,8 73,8 72,9,9 71,9 46,8,8 46,8,8 375 0010 665 gr/m
More informationArchitect: A.D.H. Photography: DR TECHNAL FY 65 WINDOW
Architect: A.D.H. Photography: DR TECHNAL FY 65 WINDOW Architect: Manuelle Gauterand Photography : Vincent Fillon FY 65 window, A range of different solutions Architect: W Architectures Photography: DR
More informationSPECTRUM PRESTIGE 86MM PROFILE SYSTEM
TECHNICAL CATALOGUE SPECTRUM PRESTIGE 86MM PROFILE SYSTEM SPECTRUM WINDOW SYSTEM 08.07.2013 SPECTRUM rev.00 1 TABLE OF CONTENTS PRODUCT GUIDE.. 3 DETAIL SHEETS 12 CUTTING CALCULATIONS. 27 GENERAL INFORMATION
More informationBS EN :2006. Windows and doors Product standard, performance characteristics. A Report To: Mila Hardware Ltd. Document Reference:
Exova Warringtonapt Key Industrial Park Fernside Road Willenhall West Midlands WV13 3YA T : +44 (0) 1902 722 122 F : +44 (0) 1902 727 242 E : willenhall@exova.com W: www.exova.com BS EN 14351-1:2006 Test
More informationRoto NT. Window and Door Technology. The world s biggest selling Tilt&Turn hardware system for windows and balcony doors
Window and Door Technology Roto NT The world s biggest selling Tilt&Turn hardware system for windows and balcony doors Installation, maintenance and operation instructions for PVC windows and balcony doors
More informationWE OPEN SPACE. Roto NT. Tilt & turn hardware. K, A and R hinges Tilt first parts catalogue & fitting instructions
WE OPEN SPACE Roto NT Tilt & turn hardware K, A and R hinges Tilt first parts catalogue & fitting instructions 01-09 Roto NT Index Product liability guidelines 4 General design description 5 Roto NT K
More information260/360/560 INSULCLAD ENTRANCES
FEBRUARY, 2011 260/360/560 INSULCLAD ENTRANCES FEATURES 1 Features 260 Insulclad has 2-11/16" vertical stile, 2-13/16" top and 4-7/16" bottom rail 360 Insulclad has 4-1/16" vertical stile, 4-1/16" top
More informationHigh performance, architecturally styled systems for designer residential applications
D E S I G N E R S E R I E S D E S I G N E R S E R I E S T h e r m a l H E A RT High performance, architecturally styled systems for designer residential applications Thermally broken aluminium window and
More informationSingle action, hinged
PY 55 DOOR Single action, hinged Applications: Single action Single or double door leaf Composite frames 2 Single and double action anti finger trap pivot Applications: Single action, bulb stile Double
More information13 th December Title: The Fire Resistance Performance Of Doorsets When Fitted With Perko Powermatic R100 Jamb Mounted Concealed Door Closers
Warringtonfire Holmesfield Road Warrington WA1 2DS T: +44 (0)1925 655 116 F: +44 (0)1925 655 419 info.warrington@warringtonfire.com warringtonfire.com Title: The Fire Resistance Performance Of Doorsets
More informationContents. Preface 6. 1 Scope General Outside of scope Terminology Units of measurement 13 1.
Contents Preface 6 0 Introduction 8 0.1 General 8 0.1.1 Applicability 8 0.1.2 Sustainability 8 0.1.3 Content 8 0.2 Performance Classes and Grades 9 0.2.1 General 9 0.2.2 Guidance for the specifier/purchaser
More informationwww.hafeleindia.com www.hafeleindia.com STILE DOOR HARDWARE BY HAFELE An office that is too noisy can be unnerving. With the popularity of predominantly open commercial spaces, there is a growing need
More informationTECHNOLOGY IN MOTION MACO MULTI-TREND TU.-ON. AND T&T FITTINGS. Installation instructions TIMBER WINDOWS
TECHNOLOGY IN MOTION TU.-ON. AND T&T FITTINGS Installation instructions TIMBER WINDOWS System designation: TO > Single routing DT > Double routing AS > Face fix fittings Note about surfaces fittings are
More informationWindow Fittings Sliding/Folding Fittings
Folding window fitting Fold 35 Features For timber door frames For 2- to 6-leaf folding doors Floating suites possible Full corrosion resistant construction, ideal for coastal applications Concealed channel
More informationSOLEAL THE UNIVERSAL WINDOW. Architect: A.D.H. Photography: DR Technal
SOLEAL THE UNIVERSAL WINDOW Architect: A.D.H. Photography: DR Technal SOLEAL casement / A RANGE OF DIFFERENT SOLUTIONS AN ALL-IN-ONE DESIGN The SOLEAL range offers many possibilities for your projects.
More informationC.9.CHRONO INVISI TILT AND TURN
C.9. Contents General characteristics... Base set (standard) n 31117, 31118 and 31119... Selection of rods n 30000-...... Installation instructions... Base set PLUS n 31517, 31518 and 31519 Installation
More informationCommercial Doors. Overview 288 Commercial Doors 290. Commercial Doors
7 Commercial Doors Overview 288 Commercial Doors 290 Commercial Doors 7 Commercial Doors Overview Design Objectives Bi-fold Doors Commercial Doors offer a range of design styles to suit many applications.
More informationSERIES W50 TECHNICAL CATALOGUE
SERIES TECHNICAL CATALOGUE Heat-insulated building construction Series W 50 3 1 Catalogue cover 3 Catalogue pages Overview 4 Design Description 5 System Description 6 Installation Depths/Levels/Drainage
More information2000T TERRACE DOOR. Features
AUGUST, 0 000T TERRACE DOOR FEATURES Features Performance class and grade: Single: AW-PG90-ATD Pairs: AW-PG45/65-ATD Inswing or outswing -/4" deep door rails and stiles Mitered door and frame corners Heavy
More informationCONTENT. Section. Introduction. Introduction. Hinges. Gears. Corner transmissions/ Middle locks/ Extensions. Stay arms. Additional elements
塑钢窗配件 Section Introduction CONTENT Introduction 1 Hinges 2 Gears 3 Corner transmissions/ Middle locks/ Extensions 4 Stay arms 5 Additional elements 6 Hardware set combinations 7 Tools / Instalation/ Adjustments
More informationSapa Window Insulated window with good indoor comfort
Sapa Window 10 Insulated window with good indoor comfort Sapa Window 10 Our insulated window system 10 with a section depth of mm gives a low U-value and high levels of airtightness and water tightness.
More informationRoto NT Designo. Window and Door Technology. Concealed hinge solution for windows and balcony doors with high sash weights up to 150 kg
Window and Door Technology Roto NT Designo Concealed hinge solution for windows and balcony doors with high sash weights up to 150 kg Installation, maintenance and operation instructions for timber windows
More informationAAMA/WDMA/CSA 101/I.S.2/A440-08
PERFORMANCE TESTS IN ACCORDANCE WITH AAMA/WDMA/CSA 101/I.S.2/A440-08 Product Manufacturer: Report No.: AI-04016-T1 Rev.1 ACRYLON PLASTICS 122 PAQUIN ROAD WINNIPEG, MANITOBA R2J 3V4 204-669-2345 Report
More informationF11.13 FRICTION HINGES F11 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS
F11 AND TOP HUNG WINDOWS F11.13 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General information...f11.13.03
More informationFrENcH casement windows D11.15 HINGES
D11 French casement windows HINGES 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Hinges Contents 1. General....03
More informationArchitect: A.D.H. Photography: DR TECHNAL SOLEAL THE UNIVERSAL WINDOW
Architect: A.D.H. Photography: DR TECHNAL SOLEAL THE UNIVERSAL WINDOW Architect: Manuelle Gauterand Photography : Vincent Fillon SOLEAL casement, A range of different solutions An all-in-one design The
More informationOPERATION AND MAINTENANCE MANUAL
OPERATION AND MAINTENANCE MANUAL Contents Introduction Comar 5P.i. Tilt & Turn Windows, Operation & Maintenance Comar 5P.i. & Comar 5P.i. ECO Casement Windows, Operation & Maintenance Comar 5P.i. Vertical
More informationA12.11 SALTO 4008 A12 TURN-TILT WINDOWS
A12 TURN-TILT WINDOWS A12.11 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More information855 SERIES 875 SERIES
855 SERIES 875 SERIES glass-reinforced thermal break, these systems can meet strict thermal requirements. This system ranges KEY FEATURES PERFORMANCE High performance thermal break Optional rain screen
More informationCP 130 Sliding Door. CP 130 is a premium insulated sliding system combining high weather performance with enhanced security and great aesthetics.
CP 130 Sliding Door CP 130 is a premium insulated sliding system combining high weather performance with enhanced security and great aesthetics. Available in slide or lift-and-slide variants, this sliding
More informationa total louvre design and manufacturing service
BL-LD Series Fully Louvred Doors Index Page BL50LD Aluminium louvred door 3 BL75LD Aluminium louvred door 4 BL50BF Insert louvres for doors 7 BL-LD Series - Fully Louvred Doors For more details on the
More informationWHY CHOOSE OMEGA RESIDENTIAL JOINERY
WHY CHOOSE OMEGA RESIDENTIAL JOINERY CONTENT 4 8 14 18 20 301 Series Awning Windows 309 Series Hinged Doors 313 Series Bi-fold Doors and Windows 303 Series Sliding Windows and 311 Series Sliding Doors
More informationCE conform applications according to EN External door with thermal break System Forster unico
CE conform applications according to EN 14351-1 External door with thermal break System Forster unico 2 Properties Table 1 Doors, opening outwards Change of dimension Resistance to wind load Air permeability
More information350/500 Tuffline TM Entrances 1
JANUARY, 2017 350/500 Tuffline TM Entrances 1 FEATURES Features 350 Tuffline TM has 3-1/2" (88.9) vertical stile, 3-3/8" (85.8) top and 6-3/4" (171.5) bottom rail 500 Tuffline TM has 5" (127) vertical
More informationGEZE INSTALLATION OPTIONS
GEZE TS 3000 V Buffer - up to 750 2.5 revolutions 750-850 5 revolutions 850-950 Buffer + 950-1100 1 Door closer size 2 Closing speed 3 Latching action 4 Back check (only with TS 3000 VBC) Light-running
More informationSeries 2000 Entrance Door Price List
Series 2000 Entrance Door Price List 02.04.2018 Hörmann United Kingdom Hörmann (UK) Limited Gee Road Coalville Leicestershire LE67 4JW Phone: 01530 513000 Fax: 01530 513001 info@hormann.co.uk Leicestershire
More information350/500 TUFFLINE ENTRANCES 1
350/500 TUFFLINE ENTRANCES 1 FEATURES Features 350 Tuffline has 3-1/2" vertical stile, 3-3/8" top and 6-3/4" bottom rail 500 Tuffline has 5" vertical stile, 5" top and 6-3/4" bottom rail Door is 2" deep
More informationRoto sliding system hardware technology at BAU 2017
Press Information Date: 16 January 2017 New sliding system solutions Roto hardware technology for every requirement / Diverse exhibits in Munich displayed Roto solutions for balcony doors up to 400 kg
More informationESSMANN Double-flap for the arcade rooflight classic plus
ESSMANN Double-flap for the arcade rooflight classic plus Glazing variants with ESSMANN AeroTech available Product features Thermally isolated profile system Safety de-watering by means of a novel transom
More informationAAMA/WDMA/CSA 101/I.S.2/A NAFS North American Fenestration Standard/Specification for windows, doors, and skylights
AAMA/WDMA/CSA 101/I.S.2/A440-08 NAFS North American Fenestration Standard/Specification for windows, doors, and skylights Registered trade-mark of American Architectural Manufacturers Association Registered
More informationPanic exit devices with integrated latch: Push bars and touch bars complying with EN 1125
DOOR technology order catalogue Panic exit devices with integrated latch: Push bars and touch bars complying with EN 1125 Panic exit devices with integrated latch in compliance with EN 1125 Table of contents
More informationH Window Company, LLC Super-insulating Windows and Doors th Avenue West Ashland WI Phone: Fax:
H Window Company, LLC Super-insulating Windows and Doors 401 17th Avenue West Ashland WI 54806 Phone: 715.685.23 Fax: 715.685.9441 KH@ENERGATE.US WWW.ENERGATE.US ENERGATE Test Report (Summary) No: haeussler-100801-13k,90,90,9
More informationSound-absorbing spacer Sorp10
Sponsor: Reference number: 7.3 / 27080 This document is only a translated version; not legally attested Max Frank GmbH & Co. KG Mitterweg 1 94339 Leiblfing Federal Institute for Materials Research and
More informationCERTIFICATE OF APPROVAL No CF 209 ROYDE & TUCKER LIMITED
CERTIFICATE OF APPROVAL No CF 209 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Bilton Road, Cadwell
More informationDoors & windows. Non-insulated profile systems made from steel and stainless steel
Doors & windows Non-insulated profile systems made from steel and stainless steel STEEL SYSTEMS NON-INSULATED DOORS & WINDOWS Strong views. Not insulated, but fully functional. Doors and windows symbolise
More informationSapa Facade 4150/4150 SX. Versatile curtain walling
Sapa Facade 41/41 SX Versatile curtain walling Sapa Facade 41/41 SX Sapa 41 SX/41 makes installation easy and allows considerable freedom in design and function. The facade elements can be used as a curtain
More informationReport No: Test of: Reversible aluminium/timber window. Tested to: BS :2009 Performance of windows & doors Part 2: Operation & strength
Report No: 181947 Test of: Reversible aluminium/timber window Tested to: BS 6375-2:2009 Performance of windows & doors Part 2: Operation & strength For: A/S Peder Nielsen Beslagfabrik Norregade 25 Bronderslev
More informationTitle: WF Report No: Prepared for: Simonswerk UK Ltd. Burcott Works, Spring Street, Tipton, West Midlands, DY4 8TF. Date: 20 th April 2012
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom T : +44 (0) 1925 655 116 F : +44 (0) 1925 655 419 E : warrington@exova.com W: www.exova.com Title: The fire resistance performance
More informationRoto Patio Life. Window and door technology. Standard hardware for large Lift&Slide doors up to 300 kg
Window and door technology Roto Patio Life Standard hardware for large Lift&Slide doors up to 300 kg Installation, Maintenance and Operation instructions for VEKASLIDE system Imprint Copyright: September
More informationSlim profile steel system for doors and windows
Slim profile steel system for doors and windows 2 TABS thermal insulation system 3 Window and door variants 5 References 15 Overview of products and items 39 The latest information and technical descriptions
More informationContents TRANSOM CLOSER 690 SERIES 23 LOCK OF GLASS DOOR 800 SERIES 24 AUTO HINGE 820 SERIES 25 PANIC EXIT DEVICE 910 SERIES 26
www.usaf.com.tw Contents ELECTRIC STRIKE 100 SERIES 1 E-SAVE SLIDER 171 SERIES 2 SHOWER HINGE 230 SERIES 3 SHOWER HINGE 240 SERIES 4 FREE HINGE 20 SERIES GLASS CONNECTOR 280 SERIES 6 PVC GASKET 290 SERIES
More informationC12.11 SALTO 4208 C12 SIDE HUNG WINDOWS
C12 SIDE HUNG WINDOWS C12.11 01.07.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More informationLTS31 AW OVERVIEW. Configurations: These systems can accommodate up to 5 panel per unit.
0 OVERVIEW TECHNICAL INFORMATION Profiles: Profiles are manufactured from 6063-T5 extruded aluminum with a wall thickness of up to /8 allowing for oversized panels. The door systems are available with
More informationABOUT. In 1973 Baertec Machinery took its place in Bursa Industry by producing Aluminium and Pvc & Metal Processing Machinery.
ABOUT US In 1973 Baertec Machinery took its place in Bursa Industry by producing Aluminium and Pvc & Metal Processing Machinery. In 1973 Baertec Machinery took its place in Bursa Industry by producing
More informationMAX 50mm Pocket Glazed Commercial Door
1 TM MAX 50mm Pocket Glazed Commercial Door 181 EDGE Architectural Glazing Systems: MAX Technical Manual, January 2015 181 C9700 DG Plain Stile 2 C9706 Wide DG Plain Stile C9712 mm DG Rail mm Sliding Head/Jamb
More information4 Door Closers Ä o ²»
Door Closers Contents Overhead position door closers Door closer StarTec Door closer GEZE Rebate door closer Concealed door closer StarTec Concealed door closer GEZE Electric door operator GEZE Transom
More informationPORTAL for timber and PVC.
PORTAL for timber and PVC. Technical information: ES, HS, PSK PLUS, PS PLUS, FS PLUS, CS. WINDOW HARDWARE DOOR HARDWARE SLIDING DOOR HARDWARE VENTILATION TECHNOLOGY BUILDING TECHNOLOGY SLIDING DOOR HARDWARE
More informationProduct information. Projecting top hung window fi ttings. Application. Geared handles SPACIO. Materials, surface sealing ferguard*silver
Product information Projecting top hung window fi ttings Application Projecting top hung window fi ttings are primarily designed for use on metall windows and need to be planned for each project individually.
More informationB12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS
B12 TILT-TURN WINDOWS B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More information1.1 Material 1.2 Profile and Accessories, Lists 1.3 Profile Sections. Cross Sections, Deduction Measurements
_ORTA_Register.qxd 14.04.2014 09:52 Seite 1 1 Product Details 1.1 Material 1.2 Profile and Accessories, Lists 1.3 Profile Sections 2 Profile Combinations Cross Sections, Deduction Measurements 2.1 Sliding
More informationTECHNOLOGY IN MOTION MACO. TU.-ON. and T&T FITTINGS. Comfort fittings
TECHNOLOGY IN MOTION MACO multi TU.-ON. and T&T FITTINGS Comfort fittings Installation INSTRUCTIONS 80 kg MACO Key Sash rebate height Sash rebate width Handle position Backset Maximum sash weight Comfort
More informationAAMA/WDMA/CSA 101/I.S.2/A440-08
PERFORMANCE TESTS IN ACCORDANCE WITH AAMA/WDMA/CSA 101/I.S.2/A440-08 Product Manufacturer: Report No.: AI-04016-U1 Rev.1 ACRYLON PLASTICS 122 PAQUIN ROAD WINNIPEG, MANITOBA R2J 3V4 204-669-2345 Report
More informationALU 5200-TBT (150 kg)
ALU 5200-TBT (150 kg) FBS Tilt-and-turn hardware for hinge clearance (BD) 5 mm with mishandling device (FBS) on the corner drive (EUL) KPW BD 5 Tilt point horizontal (KPW) Size range It is essential to
More informationFittings and door rails for toughened glass assemblies
Fittings and door rails for toughened glass assemblies Universal / RP / EA / TP/TA VISUR / BEYOND / SG Contents PRODUct range 4 5 UNIVERSAl 6 41 RP 42 47 EA 48 60 TP/TA 62 91 visur 92 99 beyond 100 109
More information190/350/500 STANDARD ENTRANCES
APRIL, 2012 190/350/500 STANDARD ENTRANCES FEATURES 1 Features 190 narrow stile has 2-1/8" vertical stile, 2-1/4" top and 3-7/8" bottom rail 350 medium stile has 3-1/2" vertical stile, 3-1/2" top and 6-1/2"
More informationRoto NT. Window and door technology. The world s biggest selling Tilt&Turn hardware system for windows and balcony doors
Window and door technology Roto NT The world s biggest selling Tilt&Turn hardware system for windows and balcony doors Installation instructions for aluminium profiles with 16 mm hardware groove Liability
More informationGETO Megaport II Flush rear doors
For body kits, curtainsider kits and other bodywork kits Approved to DIN EN 1262 Code XL Decisive weight advantage GETO Megaport II Flush rear doors TITGEMEYER For all those who have something to say The
More informationPARALLEL STAY. Parallel Opening Hinge for Commercial Applications
PARALLEL STAY Parallel Opening Hinge for Commercial Applications Cotswold parallel hinges provide natural ventilation whilst maintaining aesthetically pleasing sightlines for modern façade design. Parallel
More informationDoor Closers Contents
Door Closers Contents Overhead position door closers Door closer StarTec...10 Door closer GEZE...12 Door closer StarTec...15 -.20 Door closer GEZE...21 -.28 Accessories...29 Overhead door closer...30
More informationAluminium Sliding Door System
Aluminium Sliding Door System This system focuses on modern, sharp lines which are the result of the small radii achieved in the design of the aluminium sections. It allows designers to create distinctive
More informationRTS 85. Transom concealed door closer
RTS 85 Transom concealed door closer Disappears into the frame Ideal for shopfitting. For both double and single action doors. Elegant, versatile, practical and quality assured. The RTS 85 offers a solution
More information49% * Function Doors for Construction Projects. Multi-purpose door with thermal break MZ Thermo65
Up to 49% * better thermal insulation Function Doors for Construction Projects Multi-purpose door with thermal break MZ Thermo65 2 www.samsondoors.co.uk 0800 328 6250 www.samsondoors.co.uk 4 Hörmann Brand
More informationAccessories. The extensive accompaniment for glass doors.
The extensive accompaniment for glass doors. CONTENTS Materials and surface finishes 138 Product information Door rails 139-140 Door holders 141 Hinges - special applications 142 Door stop and strike plates
More informationEPD Glass Architecture
EPD Glass Architecture Short version Environmental Product Declaration Acc. to ISO 14025 and EN 15804 CI System Glass Architecture PR60 and Smoke lift M (company EPD) LAMILUX Heinrich Strunz GmbH Declaration
More informationFloor Springs DORMA BTS 75 V BTS 80 BTS 84
Floor Springs DORMA BTS 75 V BTS 80 BTS 84 DORMA BTS 75 V DORMA BTS 80 DORMA BTS 84 Floor Springs Quality assurance for DORMA floor springs Quality assured manufacture to DIN ISO 900, EN 900, BS 5750.
More informationCLASSIC, CONTEMPORARY
TECKENTRUP HOME CLASSIC, CONTEMPORARY Side Hinged Garage Doors & Side Doors GSW 40-L WWW.TECKENTRUPDEPOT.CO.UK TECKENTRUP DESIGN Every detail, perfect High quality hinges Aluminium hinges with secured
More informationMaco Tilt & Turn Hardware Systems
Tilt & Turn Hardware Systems Issue 1 Always at your side - the VBH Enhanced Service Package More products. More brands. More choice. Simply everything you need to manufacture and install windows and doors
More informationTechnical information Standard sash casement
Standard sash casement Standard sash window Standard sash window modus standard sash casement windows offer modern looks in all configuration styles modus standard sash casement design offers a modern
More informationTHE NEW HARDWARE SYSTEM ALU 540. Roto ALU 540. FB 44-0 GB July 2005 Alu B.U./J.S. (Translation: Prunty 9/05)
THE NEW HARDWARE SYSTEM ALU 540 1 APPLICATION RANGE Hinge-side compatible with all conventional Euro-chamber profiles Clampable hinge-side with preassembled clamp-strips Available for all standard opening
More informationPARALLEL STAY. Parallel Opening Hinge for Commercial Applications
PARALLEL STAY Parallel Opening Hinge for Commercial Applications Cotswold parallel hinges provide natural ventilation whilst maintaining aesthetically pleasing sightlines for modern façade design. Parallel
More informationBTS Accessories. Floor Spring Accessories
BTS Accessories Floor Spring Accessories Floor spring accessories Single action aluminium doors For single action aluminium doors Aluminium door straps 2 For flush-closing single action aluminium doors
More informationDeubl Alpha door frames
Deubl Alpha door frames 2 11/04 Deubl Alpha Door frames General information New and super narrow the perfect aluminium door frame for glass assemblies: Please note: Fittings have to be ordered separately.
More information