* depending on drive configuration at constant 24/29 V DC without load

Transcription

1 Page 1/8 - stand of 02/2016 Very powerful drive. Compact thanks to its horizontally turned guidance tube. Almost all special MEGAMAT 2 equipment can also be used with. This mix of power and diversity makes it unique. Load capacity: max N push / max N pull Adjustment speed: max. 9.5 mm/sec. * Stroke length: max. 400 mm (6000 N), max. 300 mm (8000 N) Equipment options: safety limit switch, additional limit switch, safety spindle nut, Hall sensor * depending on drive configuration at constant 24/29 V DC without load

2 Page 2/8 - stand of 02/2016 Standard configurations Performance data Load capacity Adjustment speed 1 Stroke length max N push max N pull max. 9.5 mm/sec. Fitting dimension (B) 2 max. 400 mm (6000 N) max. 300 mm (8000 N) min. 163 mm + stroke Duty cycle 2/18 min. or 10 %, max. 5 switching cycles per minute Motor voltage maintenance-free 24 V DC motors Components Limit switch with micro switch Stroke pipe clevis Guidance profile drill hole: 10/12 mm recess: 5/8/10 mm plastic adjustable (8 x 22.5 ) drill hole: 10/12 mm recess: 5/8/10 mm aluminium max N stepless adjustable aluminium untreated Housing colour light grey RAL 7035 Motor connecting line grey, spiralled, 455 mm, LSP-plug, PVC grey, spiralled, 160 mm, LSP-plug, PVC black, spiralled, 455 mm, LSP-plug, PVC grey, straight, 1660 mm, LSP-plug, PVC, UL black, straight, 550 mm, 8-pole DIN-plug, PVC Gear clevis Stroke pipe Further data Controls to be fitted directly MCL II Protection type max. IPX6 Protection class III Relative humidity 30% - 75% Ambient temperature +10 C C Extra configurations Components Position feedback Hall sensor Stroke pipe aluminium anodised max N steel powder-coated 8000 N pluggable Motor connecting line Further data Quick release / Retracting function 3 mechanical retracting function (LR) up to max N (only for push drives),

3 Page 3/8 - stand of 02/2016 GQR in clevis up to max N (only for push- or pull-drives)

4 Page 4/8 - stand of 02/2016 Equipment options safety limit switch, additional limit switch, safety spindle nut 1 depending on drive configuration at constant 24/29 V DC without load 2 see technical drawings 3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.

5 Page 5/8 - stand of 02/2016 Variants Type Max. push / pull force at stroke mm Max. push / pull force at stroke mm Adjustment speed1 Type Max. push / pull force at stroke mm Max. push / pull force at stroke mm Adjustment speed gängig/single thread 6000 / 3000 N gängig/single thread 8000 / 3000 N 6000 / 3000 N - up to 5.8 mm/s up to 5.8 mm/s gängig/second thread 6000 / 3000 N gängig/second thread 8000 / 3000 N 6000 / 3000 N - up to 8.2 mm/s up to 8.2 mm/s depending on drive configuration at constant 24/29 V DC without load

6 Page 6/8 - stand of 02/2016 Product details Fixed motor cable with mounted MCL II control unit Gear clevis can be turned (8 x 22,5 = 180 ) Mechanical retracting function (LR) GQR

7 Page 7/8 - stand of 02/2016

8 Powered by TCPDF ( Page 8/8 - stand of 02/2016