K16.14 STAINLESS STEEL DOOR PULLS
|
|
- Charleen Wilson
- 6 years ago
- Views:
Transcription
1 K16 DOORS K Waregemstraat Zulte - Belgium - T F commercial@sobinco.com -
2 CONTENTS 1. General... K General information K Explanation dimensions K Explanation normal type and VI type K Care tips K Door pulls... K /1871 K /1771 K /1876 K K /1864 K /1868 K /1874 K /1879 K /1883 K /1885 K /1862 K /1889 K K /1788 K K Fixing sets...k Single-sided fixing K Double-sided fixing K Single-sided fixing at 30 on aluminium or timber doors K Double-sided fixing at 30 on aluminium or timber doors K Invisible fixing K K
3 1. General 1.1. General information The SOBINOX door pulls are manufactured from high-grade stainless steel AISI 304. The SOBINOX door pulls are supplied with a satin finish. These door pulls can be used in many different sectors due to their aesthetic, practical, maintenance friendly and hygienic properties: e.g. private houses, hospitals, catering, industry,... The fixing sets must be ordered separately and are available for different section depths. You will find more information about the fixing sets on pages K to K The door pulls are non-handed Explanation dimensions A = length between fixing holes B = depth C = width D = diameter E = side L = overall length VI = with invisible fixing (non-threaded and can only be used with small press screws) 1.3. Explanation normal type and VI type VI type normal type inside outside 1.4. Care tips Maintenance should be carried out at suitable intervals to prevent surface corrosion and for reasons of hygiene. Normal maintenance Clean the stainless steel parts regularly Treat the surface with soapy water or with a mild detergent Rinse of the detergent with clean water Polish with a soft cloth or sponge Never use Scouring powders Steel wool or steel brushes Highly abrasive materials K
4 2. Door pulls /1871 Order code A (mm) B (mm) C (mm) D (mm) VI VI VI VI VI VI VI This type is available made to measure with diameter 25 or 30 mm and with hole centres (A) from 200 to 2000 mm /1771 Order code A (mm) B (mm) D (mm) VI VI VI VI This type is available made to measure with diameter 25 or 30 mm and with hole centres (A) from 200 to 2000 mm. K
5 /1876 Order code A (mm) B (mm) C (mm) D (mm) VI VI VI Order code A (mm) B (mm) D (mm) VI K
6 /1864 Order code A (mm) B (mm) D (mm) L (mm) VI VI VI VI VI VI This type is available made to measure with diameter 25 or 30 mm and with hole centres (A) from 200 to 2000 mm /1868 Order code A (mm) B (mm) D (mm) L (mm) VI VI VI VI VI VI This type is available made to measure with diameter 25 or 30 mm and with hole centres (A) from 200 to 2000 mm. Note: this type is provided with a slanting support and is fixed on the door at an angle of 30. K
7 /1874 Order code A (mm) D (mm) VI VI VI VI VI VI /1879 Order code A (mm) B (mm) D (mm) VI VI VI VI VI VI This type is available made to measure with diameter 25 or 30 mm and with hole centres (A) from 200 to 2000 mm. K
8 /1883 Order code A (mm) B (mm) D (mm) VI VI VI VI /1885 Order code A (mm) B (mm) D (mm) VI VI VI VI Note: this type is provided with a slanting support and is fixed on the door at an angle of 30. K
9 /1862 Order code A (mm) B (mm) D (mm) VI VI VI VI VI VI This type is available made to measure with diameter 25 or 30 mm and with hole centres (A) from 200 to 2000 mm /1889 Order code A (mm) E (mm) VI VI VI VI VI This type is available made to measure with side 25 or 30 mm and with hole centres (A) from 200 to 2000 mm. K
10 Order code A (mm) L (mm) VI VI This type is available made to measure with diameter 30 mm and with hole centres (A) from 200 to 2000 mm /1788 Order code A (mm) B (mm) C (mm) D (mm) VI VI K
11 Order code A (mm) VI VI 500 K
12 3. Fixing sets 3.1. Single-sided fixing Fixing on glass doors Fixing on aluminium or timber doors Parts 1) screw bolt for single-sided fixing M10 6) decorative nut 2) plastic washer 7) plastic washer 3) guide bush (for glass door) 8) threaded rod Order table Order code Material of the door Length threaded rod Section depth X Diameter door pull glass glass alu/timber alu/timber alu/timber alu/timber alu/timber alu/timber alu/timber alu/timber K
13 3.2. Double-sided fixing Fixing on glass doors VI type normal type Fixing on aluminium or timber doors VI type normal type Parts 2) plastic washer 3) guide bush (for glass doors) 4) screw bolt M10 for double-sided fixing 5) inner washer 9) screw bolt for double-sided fixing 10) hexagon socket screw M5 Order table Order code Material of the door * Total length of the screw bolt Length threaded rod Section depth X Diameter door pull P glass P glass P alu/timber 90* P alu/timber 90* P alu/timber 105* P alu/timber 105* P alu/timber 120* P alu/timber 120* P alu/timber 135* P alu/timber 135* P alu/timber 150* K
14 3.3. Single-sided fixing at 30 on aluminium or timber doors The set contains 2 threaded rods, 2 decorative nuts and 2 fixing rings. This set is not available for glass doors. Order code Length B threaded rod Section depth A Diameter door pull or Double-sided fixing at 30 on aluminium or timber doors VI type normal type The set contains 2 threaded rods for double-sided fixing and 4 fixing rings. Order code Length B threaded rod Section depth A Diameter door pull P P P P P P P P or 30 K
15 3.5. Invisible fixing Invisible fixing on aluminium doors Parts 1) door pull 4) threaded rod 2) tensioning ring 5) clamping piece 3) spring washer 6) screw cap Order code Diameter door pull Invisible fixing on timber doors Parts 1) door pull 7) threaded rod 2) tensioning ring 8) fixing screw 3) spring washer Order code Diameter door pull K
16 Invisible fixing set n on aluminium, PVC or timber doors The sets can only be used for door pulls type VI. Thread-cutting fixing screws in stainless steel. Drill holes with diameter 9.5 mm. A set contains 2 screws and the corresponding fixing rings. VI type Order code Diameter door pull Invisible fixing set n 1897 with slanting support on aluminium, PVC or timber doors The set can only be used for door pulls type VI. Thread-cutting fixing screws in stainless steel. Drill holes with diameter 9.5 mm. A set contains 2 screws and the corresponding fixing rings. VI type K
C13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
C14.12 WINDOW STAYS C14 SIDE HUNG WINDOWS
C14 SIDE HUNG WINDOWS 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Window stays series 681-.. and n 684-12....03
FrENcH casement windows D11.15 HINGES
D11 French casement windows HINGES 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Hinges Contents 1. General....03
C12.11 SALTO 4208 C12 SIDE HUNG WINDOWS
C12 SIDE HUNG WINDOWS C12.11 01.07.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
F11.13 FRICTION HINGES F11 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS
F11 AND TOP HUNG WINDOWS F11.13 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General information...f11.13.03
A12.11 SALTO 4008 A12 TURN-TILT WINDOWS
A12 TURN-TILT WINDOWS A12.11 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
G11.11 INVISITOP FOR BOTTOM HUNG WINDOWS
G11 FAN LIGHT WINDOWS G11.11 50141 FOR BOTTOM HUNG WINDOWS 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
A.15 HANDLES FOR PERIMETER LOCKING SETS. Contents. Horizontal and vertical pivoting windows
.15 Horizontal and vertical pivoting windows HNLES FOR PERIMETER LOKING SETS ontents 1. General information.15.02 1.1. Handles series 501, 502 and 503.15.02 1.2. Handles series 5010, 5020 and 5030.15.02
H13.11 HANDLES H13 HORIZONTAL AND VERTICAL PIVOT WINDOWS
H13 HORIZONTL N VERTIL PIVOT WINOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - coercial@sobinco.com - www.sobinco.com ONTENTS 1. General information....03
Single locks series k
k12 Doors K12.13 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. Door locks series 8000... K12.13.03 1.1.
K17.13 DOOR STAYS K17 DOORS
K17 DOORS K17.13 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door stays n 684(C)-500...K17.13.03 1.1.
C.3 CHRONO MISCELLANEOUS. Contents. turn-tilt- and tilt-turn window
C.3 Turn-tilt and tilt-turn windows CHRONO MISCELLANEOUS Contents 1. Night vent device n 30140-861 C.3.02 1.1. General C.3.02 1.2. Profile dimensions C.3.02 1.3. Operation C.3.03 1.4. Air flow C.3.03 1.5.
B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS
B12 TILT-TURN WINDOWS B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
RC2 E11.09 CHRONO SAFE (RC2) E11 BOTTOM HUNG OPEN IN WINDOWS
E11 BOTTOM HUNG OPEN IN WINDOWS RC2 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...03
TURN-TiLT WiNDOWs A11.16 CHRONO ACCessORies
A11 TURN-TILT WINDOWS A11.16 CHRONO Accessories 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. Window stay
A.10 CHRONO FOR PIVOTING WINDOWS. Contents. Horizontal and vertical pivoting windows
A.10 Hizontal and vertical pivoting windows CHRONO 10040 FOR PIVOTING WINDOWS Contents 1. General characteristics A.10.02 2. Base set n 10040 A.10.03 3. Centre locking set n 30140-800 A.10.04 4. Selection
Stirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
Features and Benefits
Features and Benefits Max door panel weight is 75kg Max overall unit height is 2700mm Max door panel width is 900mm No drilling required for flushbolts or locking systems Concealed bottom channel for improved
RC2 B11.09 CHRONO SAFE (RC2) B11 TILT-TURN WINDOWS
B11 TILT-TURN WINDOWS RC2 B11.09 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
Kent Anti Terrorist Bollard
Kent Anti Terrorist Description: The Truck PAS 68 flat top bollard is designed to prevent terrorist attacks. The bollard is manufactured from 316L Stainless Steel with a 300mm diameter tube as standard.
Dear valued customer Thank you for choosing to purchase a KwickScreen.
USER MANUAL We transform buildings by making spaces flexible, enriching their beauty, functionality and efficiency with portable, retractable, printed partitions. Dear valued customer Thank you for choosing
Cleaning & Maintenance. For Aluminium Products
Cleaning & Maintenance For Contents Cleaning & Maintenance 3 Repair 4 Fabrication & Installation Stage 5 Organic Coated Aluminium 6 Replacement Of Broken Glass 7 Hardware Maintenance 7 Sash Window Maintenance
= M. horizon sliding door and FIXED Panel
IN-LINE sliding TUB enclosures Kinetik features... 2-3 Kinetik Kt tub enclosure sliding door and FIXED Panel... 4-5 KTO57 KT059 TUBS INLINE SLIDING Kinetik Ks tub enclosure sliding door and FIXED Panel...
Kent Slotted Grating
Kent Slotted Grating Kent Slotted Grating Specify Specify: Kent Antislip Ladder Grating KALG150; 150mm wide x 1000mm long x 25mm deep; Unlocked; Grade 304L Stainless Steel; Description: This Slotted Grating
INSTALLATION INSTRUCTIONS TOP MOUNT SINKS
These instructions are for installing top mount stainless steel sinks. (CH365 and CH366 NOT included) Please read all instructions carefully before starting the installation. TABLE OF CONTENTS Preparation
INSTALLATION INSTRUCTIONS UNDERMOUNT SINKS
Kitchen & Bath Products, Inc. 27688 Industrial Blvd, Hayward, CA 94545 1-877-329-6872 dp@dawnusa.net These instructions are for installing undermount sinks. Please read all instructions carefully before
I N ST R UC T I ON HHTC SERIES DELI DISPLAY CASES MODELS ML (8 FT, TWO-TIER, SELF-SERVICE) FORM (July 2003)
I N ST R UC MODEL HHTC4 T I ON HHTC SERIES S DELI DISPLAY CASES MODELS HHTC4 HHTC6 HHTC8 ML-132073 (4 FT, TWO-TIER, SELF-SERVICE) ML-132074 (6 FT, TWO-TIER, SELF-SERVICE) ML-132075 (8 FT, TWO-TIER, SELF-SERVICE)
NIS NAV AM (MY15 >) - Aluminium Tonneau Cover ATC0051 (silver) ATC0052 (Black) Installation Time: Approx. 60 Minutes WARNING!
Installation Time: Approx. 60 Minutes WARNING! When in the closed position, Aluminium Tonneau Cover must be latched and tailgate must be closed. Failure to do so could result in unexpected opening of the
ATELIER F/R - Business Line
Functional and secure: A quality product for high frequency doors. CONTENTS Technical details - 9 Materials and surface finishes 80 Product information Locks 81-8 Maxi-locks and panic function 8 Hinges
VANDAL RESISTANT FITTINGS VR105, VR125, VR145 (VR106, VR115 Export only) PRODUCT MANUAL IMPORTANT
VANDAL RESISTANT FITTINGS VR105, VR125, VR145 (VR106, VR115 Export only) PRODUCT MANUAL SHOWER FITTINGS IMPORTANT Installer: This Manual is the property of the customer and must be retained with the product
INSTALLATION INSTRUCTIONS TOP MOUNT SINK CH366
27688 Industrial Blvd, Hayward, CA 94545 Tel: (877) 329 6872 Fax: (510) 723 0099 dp@dawnusa.net These instructions are for installing top mount sink CH366. Please read all instructions carefully before
SUBARU FORESTER - SIDE STEP DIESEL VERSION INSTALLATION INSTRUCTIONS
SUU FORESTER - SIDE STEP DIESEL VERSION INSTALLATION INSTRUCTIONS SS00 VEHICLE DESCRIPTION: PART NUMBER: SUU FORESTER SACC00 R 9 L 0 Care Instructions: Clean Side Steps with a mild detergent and water
Kent Ladder Grating. Recommended For:
Kent Ladder Kent Ladder Specify Specify: Kent Ladder KLG150; 150mm wide x 1000mm long x 25mm deep; Grade 316L Stainless Steel; See page 8 & 9 which shows how to create your own unique specification clause
TECHNICAL SHEET Finish / News 2009
TECHNICAL SHEET Finish / News 2009 finish FINISH Polyethylene PE001 PE003 PE006 PE007 PE002 PE008 PE004 PE005 PE009 Stem ABS A11 A16 A12 A15 A17 A14 Babar cushion in polyurethane PU001 PU006 PU002 PU005
GV Chain Actuated VisionVent Patent GB
GV Chain Actuated VisionVent Patent GB2514119 Operation and Maintenance Manual Technical experts in the design, manufacture and supply of precision engineered, architectural rooflights for residential
Installation Instructions. Ultimate Screen. English Version 2.3
Installation Instructions Ultimate Screen English Version 2.3 REMARKS. This manual simply describes the rules governing use and installing of the Ultimate Screen Blind. For different versions we would
Reading this manual. Preface
24 25 Preface This manual explains details about the matte clear coat applied to your vehicle. Unlike a vehicle with a normal clear coat, special care is necessary to protect the appearance of a vehicle
Bracket Mounted Basin Installation Guide
INSTRUCT08 REV120125 B/MM Bracket Mounted Basin Installation Guide Important Information: Please check the products for transport damage and that contents are complete before installation. Consult a qualified
Furniture Fittings Hinges and Flap Fittings
Glass door hinge Area of application: For inset glass doors Glass door height: Max 1,200 mm Glass door width: Max 400 mm For door weight: Max 10 kg Material: Zinc alloy, steel, PVC Glass thickness: 6-10
Sliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings
Ultra 20 Swing Door fitting, door weight up to 20 kg Area of application: Door swings out to the front and to the side when being opened, allowing unlimited access to the cabinet interior, can be used
Place these instructions in vehicle s glove box after installation is complete. Clean Tonneau Cover with a mild detergent and water solution.
Place these instructions in vehicle s glove box after installation is complete Installation Time: Approx. 60 Minutes Care Instructions: Clean Tonneau Cover with a mild detergent and water solution. Do
Instruction & Operation Manual
Instruction & Operation Manual HSC Series Spring Check Valve Read and understand this manual prior to installing, operating or servicing this equipment This manual contains installation, operation, cleaning,
Matrix - Glass Coffee Table
Matrix - Glass Coffee Table Assembly Instructions - Please keep for future reference 60/867 609/0708 Dimensions Width - 00cm Depth - 0cm Height - cm Important - Please read these instruction fully before
Matrix - Glass Coffee Table
Matrix - Glass Coffee Table Assembly Instructions - Please keep for future reference 0/87 09/0708 Dimensions Width - 00cm Depth - 0cm Height - cm Important - Please read these instruction fully before
Product Maintenance Guide
Product Maintenance Guide Upvc windows, doors, FSG and conservatories Thank you for investing in our products. They have all been designed and manufactured to the highest possible standards and are relatively
VANDAL RESISTANT FITTINGS VR105, VR125, VR145 (VR106, VR115 Export only) PRODUCT MANUAL IMPORTANT
VANDAL RESISTANT FITTINGS VR105, VR125, VR145 (VR106, VR115 Export only) PRODUCT MANUAL SHOWER FITTINGS IMPORTANT Installer: This Manual is the property of the customer and must be retained with the product
1 Operating instructions for rail-mounted stand holder, variable
Use in accordance with the intended purpose Operating instructions for rail-mounted stand holder, variable. Use in accordance with the intended purpose Fig. : Rail-mounted stand holder (REF 72 47) The
READ AND SAVE THE INSTRUCTIONS
TONADO Under Cabinet ange Hood ON S MANUA Model No: Tornado 30, 36 AD AND SAV TH INSTUCTIONS! For domestic use only! Dear Customer, Thank you for your purchase from KitchenHoods.ca. If you follow the recommendations
Always refer to the manufacturers recommendations located within the literature contained within the unit packet.
CARE AND MAINTENANCE The limited warranty and the limited warranties issued by component manufacturers require periodic service and maintenance and the owner s failure to provide this service and/or maintenance
Series B - Specifications
D e s i g n e r F i t t i n g s N o v a s S e r i e s B D e s i g n e r D o o r F u r n i t u r e Series B - Specifications FEATURES FEATURES Size Fixing Standard Finishes Door Thickness 54mm diameter
Hinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
Product: PVC-u Door Edge Guard
: PVC-u Door Edge Guard : DEG-PVC-[width]-[length]-[colour]-(fire rating] PVC Door Edge Guard 10mm Core Page 1 of 7 Product Description Fitted with intumescent fire and smoke seals which are vandal-resistant
Vehicle Care ! WARNING: CLEANING PRODUCTS CLEANING THE EXTERIOR
Chapter 8! WARNING: Many liquids and other substances used in vehicles are poisonous and should never be consumed and must be kept away from open wounds. These substances include antifreeze, brake fluid,
sink and tap collection
sink and tap collection 2 Tuscan sink and tap collection The Tuscan collection offers an extensive choice of stunning sinks and taps. Elegant yet hard wearing, our range allows you to make your own statement
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Mounting System Ford F150 Kit No. 76259 (black) or 76260 (stainless steel) As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message has
Q15P. Mitsubishi MQ Triton Dual Cab
Mitsubishi MQ Triton Dual Cab Page 1 of 12 Fitting Instructions Part Number Mitsubishi MQ Triton Dual Cab 2015+ To suit Sports Bars Check contents of kit before commencing fitment and report any discrepancies
Pull handles, tubular handles, recessed handles
, tubular handles, recessed handles 303 K0187 170 R25 55 14 M8 35 R12 140 32 82 R8 14 M8 57 uroplast PF 31, black. ushing brass or galvanized steel. igh-gloss polished. K0187.101 25 ssembly: From the rear.
INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part number: Application: Ford F150 Ecoboost
INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part number: 88070 Application: 2011+ Ford F150 Ecoboost GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make
CT CLICK HERE. to watch our product demonstration video. Product Description: Primary Area for Product Usage: Dispenses/Stores:
Product Description: BOWMAN Mobile Protection System Holds laundered or boxed gowns, earloop face masks or face shields, gloves, and has dedicated storage areas for additional isolation supplies Easy roll
Grab Rails. Economy Rails Shower Rails Toilet Rails Bath Rails. Improving Your Life Everyday
Grab Rails Economy Rails Shower Rails Toilet Rails Bath Rails Improving Your Life Everyday To i l e t R a i l s Type 01 Type 02 A = Standard lengths available 300, 450, 600, 750, 900,1200mm Rails may be
PRODUCT MANUAL 46ST (V.5.0) 46ST FS (V.5.0.F) 50ST (V.2.0) 50ST FS (V.2.0.F) RON-WPM ST/46STFS/50ST/50STFS-Rev.3
PRODUCT MANUAL RON-WPM-710246-46ST/46STFS/50ST/50STFS-Rev.3 EXPLODED VIEW ITEM. 3 MODEL ST - PART No. 544521 ITEM. 3 MODEL ST FS - PART No. 544530 p2 ITEM. 12 - PART No. 775600/775650 ITEM. 13 - PART No.
ARQUA STATION DF4 + DF7
The Arqua Station DF4 + DF7 is a complete system to provide fresh tap or filtered water to public spaces. This technical pack includes: Assembly and Installation guide Care and Maintenance For more information,
INSTALLATION INSTRUCTIONS
Accessory Application Publication No. INSTALLATION INSTRUCTIONS 2 PIECE FOLDING POLY WINDSCREEN (OPTICAL) P/N 0SR72-HL3-100 SXS700M4/M2 Honda Dealer: Please give a copy of these instructions to your customer.
sink and tap collection
sink and tap collection 2 Tuscan sink and tap collection The Tuscan collection offers an extensive choice of stunning sinks and taps. Elegant yet hard wearing, our range allows you to make your own statement
Pneumatic Circular Saw. Type Illustration can differ from the original. Spare Parts List
Pneumatic Circular Saw Type Illustration can differ from the original Cleaning Regular cleaning is required for a continuous and proper operation. Clean the housing regularly with a soft cloth, it is important
H15P. Toyota Hilux A-DECK Dual Cab
Toyota Hilux A-DECK Dual Cab Page 1 of 14 Fitting Instructions Part Number H15 Toyota Hilux A-DECK Dual Cab 2015+ To suit Sports Bars Check contents of kit before commencing fitment and report any discrepancies
Waukesha Cherry-Burrell Valves
BUTTERFLY VALVES 1 Waukesha Cherry-Burrell Valves BUTTERFLY VALVES 200 Valves Series Butterfly Valves 250 Series Ball Valves Manual & Automatic Actuators Read and understand this manual prior to operating
TSL-938. soap dispenser. installation + maintenance
TSL-938 soap dispenser installation + maintenance contents 3 Box Contents 3 Technical Data 4 Before You Install 5 How to Install 6 Commissioning 6 Operation 6 Cleaning 6 Soap 7 Refilling 8 Troubleshooting
Vehicle Care ! WARNING: CLEANING PRODUCTS CLEANING THE EXTERIOR
Chapter 8 CLEANING PRODUCTS! WARNING: Dry cleaning fluids may be toxic or flammable. Take adequate precautions when handling these products. Brush and clean the interior regularly. Use a vacuum cleaner
Serious about Service
Serious about Service Stainless steel enclosures IP66 Features and benefits Features: IP66 certified Grades 304, 304L and 316L available Monobloc symmetrical enclosure Scotch Brite mechanical polished
GV Standard 3 Wall Box Operation and Maintenance Manual
GV Standard 3 Wall Box Operation and Maintenance Manual Technical experts in the design, manufacture and supply of precision engineered, architectural rooflights for residential and commercial buildings.
PRODUCT MANUAL 52ST (V.4.0) 52ST FS (V.4.0.F) RON-WPM ST/52STFS-Rev.3
PRODUCT MANUAL 52ST (V.4.0) RON-WPM-710021-52ST/52STFS-Rev.3 52ST (V.4.0) p2 EXPLODED VIEW ITEM. 3 MODEL ST - PART No. 540406 ITEM. 3 MODEL ST FS - PART No. 540411 ITEM. 16 - PART No. 589111 ITEM. 15 -
ASSEMBLY INSTRUCTIONS. Toll-free: MODEL N
MODEL N0. 068-6-6 ASSEMBLY INSTRUCTIONS Toll-free: -888-670-668 IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. MADE IN CHINA.
K K
K0186 cast iron 2 R Gray cast iron, GJS 400 umbled, black powder-coated, support faces machined K0186.12510 1 ±0,5 KIPP, metric 202 Item o. Item o. 1 2 R Load tumbled tumbled capacity powder-coated, black
Cleaning, Maintenance and Repair
aluminium www.egaluminium.co.uk Cleaning, Maintenance and Repair Aluminium and PVC-U Windows, Doors and Architectural Products Windows - Doors - Bi-Folds - Roof Lanterns - Shop Fronts Tel: 01823 618181
KH E, KH E
INSTRUCTIONS FOR USE Kitchen extractor hood Type: KH 17101 E, KH 17106 E Dear Customer!! You are now a user of the newest generation kitchen extractor hood of KH 17101, KH 17106. This hood has been designed
(2012 Production Onwards) INTEGRATED SIDE STEP INSTALLATION INSTRUCTION. 60 Minutes
NISSAN DUALIS (2012 Production Onwards) INTEGRATED SIDE STEP INSTALLATION INSTRUCTION Accessory Part No. STEP0004 60 Minutes Approx Product Weight: 15kg/33 lb IMPORTANT - PLEASE READ INSTRUCTIONS BEFORE
BARDON T01-C TOUCHLESS URINAL SENSOR INSTALLATION INSTRUCTIONS K-8787T-C02(DC/ ) K-8787T-C04(AC/ ) 18 E
BARDON TOUCHLESS URINAL SENSOR INSTALLATION INSTRUCTIONS K-8787T-C0(DC/ ) K-8787T-C04(AC/ ) Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation
TANGENT RAIL SEATING TECH BRIEF
TANGENT RAIL SEATING TECH BRIEF PRODUCT DATA Tangent Rail Seating offers a clean design aesthetic, the durability of die-cast aluminum, and the versatility that comes with a wide range of seat, rail and
Sales Parts Service Installation Rigging RAMCO SWE T Washer/Extractor Series MAINTENANCE & TROUBLESHOOTING
Sales Parts Service Installation Rigging www.ramcolaundry.com RAMCO SWE350-450T Washer/Extractor Series MAINTENANCE & TROUBLESHOOTING Chapter 6 Maintenance 6.1 Outline Though the machine is well designed
8791T-C02( ) 8791T-C04(AC) 8791T-C04( ) size alkaline batteries(8791t-c02) 2 7 (AAA 2)(8791T-C02) 220V AC 50/60Hz(8791T-C04)
PATI URINAL SENSR INSTALLATIN INSTRUCTINS K-8791T-C0(DC/ ) K-8791T-C04(AC/ ) Please read these instructions carefully to familiarize yourself with the required tools materials and installation sequences.
2015 (LA) Challenger SRT Hellcat
NUMBER: 23-031-14 GROUP: Body DATE: October 16, 2014 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored
EA patch fittings for offset hung doors in toughened glass assemblies 56. Top centres for wood and steel frames 58. Glass preparation details 60
EA General information 50 EA patch fittings for offset hung doors, 24 mm frame stop depth EA patch fittings for offset hung doors, various frame stop depths 54 EA patch fittings for offset hung doors in
ROHL Perrin & Rowe Bath U.3520L/1
EXPOSED FLOOR MOUNT TUB FILLER WITH HANDSHOWER AND LEVER HANDLES ROHL Perrin & Rowe Bath U.3520L/1 FEATURES FINISHES WARRANTY 1/2 F NPT connections Spout, valve, and handles made from solid brass 1/4 turn
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount For 2007 Toyota Tundra Kit 76380 (Black) and 76381 (Stainless) Your safety, and the safety of others, is very important. To help you make informed
HD 1050 DE. Maximum performance. Optimum ease of use. Maximum independence. Outstanding mobility
HD 1050 DE Independently usable high-pressure cleaner with electric start and a hard-wearing high-powered Yanmar diesel engine. Easy to transport due to large wheels with air tyres, favourable weight and
Instructions for Fitting, Operating and Maintenance Canopy Door RE / (St.: )
EN Instructions for Fitting, Operating and Maintenance Canopy Door 1 818 012 RE / (St.: 12.2010) 12.2010 ENGLISH Contents 1 Safety Instructions... 3 1.1 Qualified persons... 3 1.2 Symbols and signal words
Mote. zenithinteriors.com
Mote Mote Mote responds to the demands of dynamic work environments. MOTE SOFA, OTTOMAN, SCREENS AND ACCESSORIES FEATURES The fully upholstered Mote collection consists of sofas, ottomans, stool, screens,,
PRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM
PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com
INSTALLATION INSTRUCTIONS TOILET. Castello & Sienna Back-to-Wall
INSTALLATION INSTRUCTIONS TOILET Castello & Sienna Back-to-Wall NOTE: Our Back-to-Wall toilet suites are suitable for both a rear & side entry water inlet. BEFORE YOU BEGIN Before proceeding with installation,
METAL PLUS METAL LINE SMG001 MOON STONE. 300x300x8mm(12 x12 x5/16 ) sheet,mixed Metal & Glass SMG001 ROUND. SMG001 40x20(3/2 x3/4 ) SMG001 BULLETS
92 METAL 93 94 METAL PLUS 300x300x8mm(12 x12 x5/16 ) sheet,mixed Metal & Glass METAL LINE SMG001 MOON STONE SMG001 20x20(3/4 x3/4 ) SMG001 ROUND SMG001 40x20(3/2 x3/4 ) SMG001 100X15(4 x5/8 ) SMG001 MINI
B.1.CHRONO SIDE HUNG OPEN IN WINDOWS
B.1. SIDE HUNG OPEN IN Contents General characteristics................... page B.1.2 Base set n 20110...................... B.1.4 Centre locking sets n 30140-800 and 20140-35..........................
1PC TONNEAU COVER INSTALLATION INSTRUCTIONS IMPORTANT
For use in cleaning painted metal, glass and other vehicle surfaces. For external use only. Dispose of properly after use. IMPREGNATED WITH 70% ISOPROPLY ALCOHOL TC0d PC TONNEAU COVER INSTALLATION INSTRUCTIONS
D40C HINGE # x Support Plate x M8 Bolt 8 x M8 Washer 6 x M6 20mm Bolts 6 x M6 Washers 19 x Screws
HINGE # 1017 2 x Support Plate 1018 8 x M8 Bolt 8 x M8 Washer 6 x M6 20mm Bolts 6 x M6 Washers 19 x Screws 2 x Lid mount gas strut bracket 1041 2 x Self tap strut mount 1040 1 x Central Lock bracket 1510
Installation, Operating and Maintenance Instructions Retractable Door / Art.-Nr.:
Installation, Operating and Maintenance Instructions Retractable Door 06.2008 / Art.-Nr.: 1 818 024 ENGLISH CONTENTS PAGE 1 SAFETY REQUIREMENTS 3 1.1 Symbols and key words used 3 1.2 Designated use 3 1.3
C.4.CHRONO TILT AND TURN
C.4. Contents General characteristics................... Base set n 31111, 31112 and 31113...... Centre locking set n 30140-30........... Selection of rods n 30000-................ page C.4.2 C.4.5 C.4.6
DICTATOR RTS Tube Door Closer
DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is virtually invisible because being built into the door. The joint can only be seen when the door is open. The
GN 23. Stainless Steel-Levelling feet
GN 23 Stainless Steel-Levelling feet technical informations Specification Type (Base plate) - Type D0: fine turned, without rubber underlay - Type D1: fine turned, with rubber underlay, inlaid, black Version
DOOR/S WITH INTERNAL FIXED SHELF - TOUCH RELEASE & CORIAN HANDLE OPTIONS. American Oak, Charcoal Oak, Pony Oak, Hazelnut Oak
page 1 of 9 DOOR/S WITH INTERNAL FIXED SHELF - TOUCH RELEASE & CORIAN HANDLE OPTIONS To see the complete ISSY range go to www.reece.com.au/bathrooms SPECIFICATIONS Recommended use Materials Timber Colours
CABINET & D-PULL HANDLES STAINLESS STEEL
STAINLESS STEEL CABINET & D-PULL HANDLES V2 Madinoz is a member of the dormakaba Group, one of the top 3 providers for access and security solutions in the global market. INTRODUCTION Inspired by design,