markilux 1500 The semi-cassette awning with gas piston arm technology Something special and not just technically speaking

Size: px

Start display at page:

Download "markilux 1500 The semi-cassette awning with gas piston arm technology Something special and not just technically speaking"

Sabrina Hodges
5 years ago
Views:

1 PATIO AND BALCONY AWNINGS safe timeless beautiful rated to wind resistance class 2 (corresponds to Beaufort 5) markilux 1500 The semi-cassette awning with gas piston arm technology Something special and not just technically speaking markilux

markilux 1500 PATIO AND BALCONY AWNINGS side view with awning retracted, face fixture side view with awning retracted, top fixture the gas pistontensioned arms ensure

fixture brackets side view with winding handle, manual operation side view at a pitch of 50 Design Features Technical Specification Optional Accessories presented with

provide superior robustness and durability coverboard with integrated brush, so that larger pieces of dirt and debris cannot be drawn into the awning awning covers made

Protection from the sun, the wind and inquisitive glances all in one radio-controlled motor with radio remote control for ease of use hard-wired motor operation

2 markilux 1500 PATIO AND BALCONY AWNINGS side view with awning retracted, face fixture side view with awning retracted, top fixture the gas pistontensioned arms ensure reliable and simple operation shadeplus / drop valance (optional) retracted wall sealing profile (optional), effective up to a pitch of 1 pitch adjustment via the fixture brackets side view with winding handle, manual operation side view at a pitch of 50 Design Features Technical Specification Optional Accessories presented with the IF Design Award for excellent design folding-arm awning in a semicassette version; the dynamically rounded coverboard gives the awning the appearance of being fully cassetted elegant and robust front profile made of aluminium attractive ovoid folding arms with unique gas piston technology ensure a taut cover in every extended position sturdy, round steel torque bar, 50 mm Ø, to prevent twist and deflection folding arms with drop-forged joint components and Teflon-coated bronze bushes, which provide superior robustness and durability coverboard with integrated brush, so that larger pieces of dirt and debris cannot be drawn into the awning awning covers made of sunsilk snc or sunvas snc with self-cleaning effect the shadeplus creates an additional room on the patio. Protection from the sun, the wind and inquisitive glances all in one radio-controlled motor with radio remote control for ease of use hard-wired motor operation (optionally with automatic weather controls) for straightforward and easy operation wall sealing profile to cover the gap between awning and wall awning available in non-standard RAL colours available with a valance 6 Special features

PATIO AND BALCONY AWNINGS markilux 1500 Lounge colours markilux 1500 Designer

finish 5233 stone grey metallic 5215 stone grey metallic 5215 avanna brown

anthracite metallic 54 01 02 03 04 05 06 07 08 09 11 13 15 21 22 23 Colours may

3 PATIO AND BALCONY AWNINGS markilux 1500 Lounge colours markilux 1500 Designer end caps in polished chrome off-white textured finish 5233 off-white textured finish 5233 stone grey metallic 5215 stone grey metallic 5215 avanna brown textured finish 5229 anthracite metallic 54 avanna brown textured finish 5229 anthracite metallic Colours may differ slightly from those depicted in both hue and finish. Lounge colours 7

4 markilux 1500 PATIO AND BALCONY AWNINGS Dimensions and configuration options min dimensions in cm note the minimum widths! Operation / Drive iscellaneous standard manual operation servo-assisted operation hard-wired motor io radio controls radio-controlled motor (433 z) Covers fabric range no. sunsilk snc sunsilk perla FR sunvas sunvas perla standard wall sealing profile light and wind sensor insertable side blind valance 3.. / shadeplus / drop valance manual operation optional 2) optional / / standard optional infrared heater vibrabox / radio control light sensor Sunis WireFree 2) up to a maximum awning pitch of 1 Coupled units standard 2 fields junction roller optional 3) 4) 3) for minimum widths please consult the section Technical Information 4) see overview Bracket fixture range motor 2 no. of folding arms manual operation 1 no. of rolltex bearings 8 Dimensions and configuration options awning width min. minimum widths projection

5 PATIO AND BALCONY AWNINGS markilux 1500 Frame colours standard optional Additional information The width of the awning cover is always less than that of the awning traffic white RAL 90 Pitch adjustment range: from to 50 (to the horizontal). 03 metallic aluminium RAL 9006 grey brown, similar to RAL 80 light ivory RAL 15 anthracite metallic 54 stone grey metallic 5215 Definition of projection: Please consult the section Technical Information. In the case of manual operation approximately winding handle revolutions can be assumed per metre of awning projection. It takes approximately seconds per metre to extend the awning in the case of motor-driven units off-white textured finish 5233 avanna brown textured finish 5229 non-standard powder-coated finish Other end cap colour options polished chrome Dimensions and tolerances width projection housing tolerances + 5 / 15 mm ± 40 mm awning cover width awning width 260 mm standard awning cover length awning projection optional + 0 mm Definition of shadeplus drop: The shadeplus drop is measured from the bottom edge of the shadeplus profile to the bottom edge of the valance profile. Due to fabric thickness tolerances the actual drop may be shorter than the nominal drop by up to 5 cm. For the maximum shadeplus drops please consult the section Technical Information. A shadeplus is not available with sunsilk perla FR, sunvas perla or PVC covers. Coupled folding-arm awnings are available up to a max. of 2 single units side by side, however only with a motor. A coupled unit is available with junction roller. Pattern repeat mismatches are possible in the case of junction roller covers. A junction roller may not fit when the projection is the maximum for the width of each awning. (see also the section on Installation, the arm separation table). If coupled awnings are fitted into a recess or reveal the overall width of the coupled awning must be at least 6 cm less than the width of the opening to allow the awning to be coupled Colours similar to those in the RAL chart. Colours may differ slightly from those depicted in both hue and finish. Frame colours / Other colour options / Additional information 9

6 markilux 1500 PATIO AND BALCONY AWNINGS Fixtures, fittings and accessories Fixture brackets 0 face fixture bracket assembly 45 face fixture bracket assembly 90 top fixture bracket assembly 0 mm 45 mm 90 mm top fixture bracket assembly additional bracket for 3 folding arms 45 mm 90 top fixture bracket assembly for central fixture 90 mm 90 eaves fixture bracket assembly complete set height of flat plate: 150 mm 90 mm Spreader and spacer plates spreader plate A face fixture mm spreader plate B face fixture mm spacer plate for face fixture mm N.B! max. stacking height 0 mm spacer plate for face fixture mm N.B! max. stacking height 0 mm spacer plate for face fixture mm spacer plate for face fixture mm spacer plate for top fixture 90 0 mm N.B! max. stacking height 0 mm spacer plate for top fixture 90 0 mm spacer plate for top fixture 45 0 mm spacer plate for top fixture 45 0 mm N.B! max. stacking height 0 mm 7261 please refer to the section Technical Information. insert RAL colour code no 150 Fixtures, fittings and accessories

7 PATIO AND BALCONY AWNINGS markilux Stand-off brackets stand-off bracket for face fixture bracket stand-off bracket for face fixture bracket cover plate for installation with spacer plates and stand-off brackets in the case of external insulation mm cover plate for installation with spacer plates and stand-off brackets in the case of external insulation mm Accessories reducing bolt assembly / SW mm in length reducing bolt assembly / SW mm in length reducing bolt assembly / SW mm in length reducing bolt assembly / SW mm in length angled profile eaves fixture bracket 0 0 mm available by the metre, not pre-drilled machine finish spreader / backing plate assembly eaves fixture mm (please refer to Eaves fixture with spreader / backing plate ) flat plate and angled bracket for eaves fixture not pre-drilled machine finish eaves fixture bracket height of flat plate: 150 mm eaves fixture bracket assembly height of flat plate: approx. 270 mm (please refer to Eaves fixture with spreader / backing plate ) wall sealing profile available by the metre for installation example please refer to Face fixture with wall sealing profile 40, stand-off strip for wall sealing profile available by the metre for installation example please refer to Face fixture with wall sealing profile 718. adjustable eaves fixture bracket assembly (see Installation using adjustable eaves fixture bracket ) 23 please refer to the section Technical Information. insert RAL colour code no Fixtures, fittings and accessories 151

8 markilux 1500 PATIO AND BALCONY AWNINGS Face fixture Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 Compression-proof substrate Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm B The pull-out force refers to the vertical centre to centre measurement between the fixture points of 90 mm. If this measurement is reduced to the minimum, the pull-out force increases by % in the case of compression-proof substrates and by % in the case of non compression-proof substrates. If the awning is fixed with 2 brackets per folding arm, the pull-out force can be halved. Place the brackets immediately to the left and right of the arm bearer. FB B WA awning width projection pull-out force per fixing point bracket quantity width no. of fixing points wall sealing profile face fixture bracket assembly 45 mm face fixture bracket assembly 0 mm WA,5 0 65, , Face fixture

9 PATIO AND BALCONY AWNINGS markilux 1500 Face fixture with spreader plate A Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class Compression-proof substrate Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm BP DP 1 1 B The pull-out force refers to the vertical centre to centre measurement between the fixture points of 76 mm. In the case of spreader plates washers conforming to DIN 9021 must be used. FB BP DP B WA 757. awning width projection pull-out force per fixing point bracket quantity width no. of spreader plates no. of spacer plates no. of fixing points wall sealing profile stand-off strip for wall sealing profile WA Ø Face fixture with spreader plate A 153

10 markilux 1500 PATIO AND BALCONY AWNINGS Face fixture with spreader plate B Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 Compression-proof substrate Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm BP DP 1 1 B 8 8 The pull-out force refers to the vertical centre to centre measurement between the fixture points of 350 mm. In the case of spreader plates washers conforming to DIN 9021 must be used. FB BP DP B awning width projection pull-out force per fixing point bracket quantity width no. of spreader plates no. of spacer plates no. of fixing points Face fixture with spreader plate B

11 PATIO AND BALCONY AWNINGS markilux 1500 Face fixture with stand-off brackets Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 The pull-out force refers to the vertical centre to centre measurement between the fixture points of 0 mm. In the case of stand-off brackets washers conforming to DIN 9021 must be used. FB B D Compression-proof substrate awning width projection pull-out force per fixing point bracket quantity width no. of fixing points no. of stand-off brackets stand-off bracket for face fixture bracket assembly stand-off bracket for face fixture bracket assembly A 0 0 A Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm D D B 8 8 A-A min. 80 max A 62,50 A Face fixture with stand-off brackets 155

12 markilux 1500 PATIO AND BALCONY AWNINGS Face fixture with shadeplus Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 Compression-proof substrate Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm B The pull-out force refers to the vertical centre to centre measurement between the fixture points of 90 mm. If this measurement is reduced to the minimum, the pull-out force increases by % in the case of compression-proof substrates and by % in the case of non compression-proof substrates. If the awning is fixed with 2 brackets per folding arm, the pull-out force can be halved. Place the brackets immediately to the left and right of the arm bearer. FB awning width projection pull-out force per fixing point bracket quantity width B WA no. of fixing points wall sealing profile face fixture bracket assembly 45 mm face fixture bracket assembly 0 mm WA,5 0 65, , Face fixture with shadeplus

13 PATIO AND BALCONY AWNINGS markilux Face fixture with shadeplus and spreader plate A Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 The pull-out force refers to the vertical centre to centre measurement between the fixture points of 76 mm. In the case of spreader plates washers conforming to DIN 9021 must be used. FB BP DP B WA Compression-proof substrate awning width projection pull-out force per fixing point bracket quantity width no. of spreader plates no. of spacer plates no. of fixing points wall sealing profile stand-off strip for wall sealing profile Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm BP DP 1 1 B WA Face fixture with shadeplus and spreader plate A 157

14 markilux 1500 PATIO AND BALCONY AWNINGS Face fixture with shadeplus and spreader plate B Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 Compression-proof substrate Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm BP DP 1 1 B 8 8 The pull-out force refers to the vertical centre to centre measurement between the fixture points of 350 mm. In the case of spreader plates washers conforming to DIN 9021 must be used. FB BP DP B awning width projection pull-out force per fixing point bracket quantity width no. of spreader plates no. of spacer plates no. of fixing points Face fixture with shadeplus and spreader plate B

15 PATIO AND BALCONY AWNINGS markilux 1500 Face fixture for shadeplus / drop valance with stand-off brackets Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 The pull-out force refers to the vertical centre to centre measurement between the fixture points of 0 mm. In the case of stand-off brackets washers conforming to DIN 9021 must be used. FB 0 0 awning width projection pull-out force per fixing point bracket quantity width A Compression-proof substrate A B D no. of fixing points no. of stand-off brackets stand-off bracket for face fixture bracket 713. stand-off bracket for face fixture bracket A-A min. 80 max. 300 Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm D D B A Ø (62,50) A Ø Face fixture for shadeplus / drop valance with stand-off brackets 159

16 markilux 1500 PATIO AND BALCONY AWNINGS Top fixture Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 Compression-proof substrate Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm B 8 8 The pull-out force refers to the vertical centre to centre measurement between the fixture points of 80 mm. If the awning is fitted with two brackets per folding arm the pull-out force may be halved. Place the brackets immediately to the left and right of the arm bearer. FB awning width projection pull-out force per fixing point bracket quantity width B no. of fixing points top fixture bracket assembly 90 mm top fixture bracket assembly 45 mm , ,5 22, Top fixture

17 PATIO AND BALCONY AWNINGS markilux 1500 Top fixture with shadeplus Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 Compression-proof substrate Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm B 8 8 The pull-out force refers to the vertical centre to centre measurement between the fixture points of 80 mm. If the awning is fitted with two brackets per folding arm the pull-out force may be halved. Place the brackets immediately to the left and right of the arm bearer. FB awning width projection pull-out force per fixing point bracket quantity width B no. of fixing points top fixture bracket assembly 90 mm top fixture bracket assembly 45 mm 90,5 55, , Top fixture with shadeplus 1

18 50 markilux 1500 PATIO AND BALCONY AWNINGS Eaves fixture Torque [Nm Newton metres] for the fixture bracket in the immediate vicinity of the arm, shear force [N Newton] per fixing point according to EN 13561, wind resistance class 2 Torque Shear force [cm] d [Nm] FS [N] T B 8 8 The shear force is calculated on the basis of 2 fixing points per bracket, because depending on the roof pitch it cannot be guaranteed that 4 fixing points per bracket can used. d awning width projection torque value for the bracket in the immediate vicinity of the arm T FS B no. of brackets shear force no. of fixing points Eaves fixture

19 PATIO AND BALCONY AWNINGS markilux 1500 Eaves fixture with additional spreader / backing plate Torque [Nm Newton metres] for the fixture bracket in the immediate vicinity of the arm, shear force [N Newton] per fixing point according to EN 13561, wind resistance class 2 Torque Shear force [cm] d [Nm] FS [N] T B By using the additional flat fixture plate, the shear force is reduced in comparison with conventional eaves fixture. d awning width projection torque value for the bracket in the immediate vicinity of the arm T FS B no. of brackets shear force no. of fixing points Eaves fixture with additional spreader / backing plate 3

20 markilux 1500 PATIO AND BALCONY AWNINGS Installation using the adjustable eaves fixture bracket Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 Compression-proof substrate Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm B 8 8 The pull-out force refers to the measurement from the front to the rear fixture points of 0 mm. Washers conforming to DIN 9021 must be used. FB awning width projection pull-out force per fixing point B bracket quantity width no. of fixing points , , Installation using the adjustable eaves fixture bracket

21 PATIO AND BALCONY AWNINGS markilux 1500 Installation with shadeplus / drop valance using the adjustable eaves fixture bracket Pull-out force [NNewton] per upper fixing point according to EN 13561, wind resistance class 2 The pull-out force refers to the measurement from the front to the rear fixture points of 0 mm. Washers conforming to DIN 9021 must be used. FB 345 7, , Compression-proof substrate awning width projection pull-out force per fixing point B 253 bracket quantity width no. of fixing points Non compression-proof substrate [cm] FB [N] FB [N] mm 1 45 mm B Installation with shadeplus / drop valance using the adjustable eaves fixture bracket 5

22 markilux 1500 PATIO AND BALCONY AWNINGS Face fixture with manual operation 238 0,5 65, Cable exit point in motor-driven units 39 6 Face fixture with manual operation / Cable exit point

23 PATIO AND BALCONY AWNINGS markilux 1500 Bracket fixture range for awnings with 2 folding arms A LR B SB ZB [cm] A [cm] 150 0* ** 2* ** 270* ** 3* ** 375* dimensions in cm BT T T W 45 mm 1 0 mm 2 2 DE 45 mm 1 90 mm 2 2 DA 90 mm 2 3 If the brackets cannot be positioned in accordance with this table, make sure the actual measurements are noted on the order form! * Coupled units are only available with a junction roller in the standard widths, in the case of other widths please ask us ** Please note the minimum widths! In the case of small awnings the brackets can only be fitted inside the arms, i.e. the position denoted by measurement A. A arm position BT bracket width DA eaves fixture DE top fixture GS cassette support bracket projection T no. of brackets LR a rolltex bearing with accompanying bracket is always placed under a central seam (depends on the awning size) awning width B bracket fixture range SB standard width W face fixture ZB intermediate width Bracket fixture range for awnings with 2 folding arms 7

24 markilux 1500 PATIO AND BALCONY AWNINGS Installation dimensions at varying awning pitches Top fixture x W pitch (W) approx. height in mm (X) Face fixture ux 1500 x W pitch (W) approx. height in mm (X) Installation dimensions at varying awning pitches

markilux 1650 Excellent design and well-thought-out mechanics Enjoy more of the evening with integrated halogen spotlights

markilux 1650 Excellent design and well-thought-out mechanics Enjoy more of the evening with integrated halogen spotlights safe timeless beautiful Excellent design and well-thought-out mechanics Enjoy more of the evening with integrated halogen spotlights rated to wind resistance class 2 (corresponds to Beaufort 5) www.markilux.com