ECLIPSE & Eclipse Cross Arm

Transcription

1 ECLIPSE & Eclipse Cross Arm ECLIPSE PROFILE Eclipse profile with wall mount application. ECLIPSE PROFILE #2 Eclipse profile with soffit mount application. 8 3 /4 9 1 /2 8 3 /4 9 1 /2 ECLIPSE CROSS ARM PROFILE Eclipse Cross Arm profile wall mounted /2 8 3 /4

2 ECLIPSE UNIT ECLIPSE PROFILE with Hood wall mount application with HOOD

3 WALL BRACKET - front view TOP Holes = 0.5 x 0.75 BOTTOM WALL BRACKET - side view 5.5 Eclipse Wall Bracket used on wall & Roof mounted: Eclipse Eclipse SC Available in: White, Camel, Bronze

4 SOFFIT BRACKET - top view 4.75 FRONT 2.5 BACK Holes = 0.5 x 1.0 SOFFIT BRACKET - side view Eclipse Soffit Bracket used on soffited mounted: Eclipse Eclipse SC Available in: White, Camel, Bronze 3.625

5 ECLIPSE RETRACTABLE AWNING

6 Eclipse Center Support Installation/Adjustment Instructions IMPORTANT INSTALLER NOTICE: If you change the pitch on this Eclipse awning, you will need to READJUST the Center Support. By NOT following these instructions you may cause untimely damage to the fabric cover. Damage caused by a Center Support IS NOT covered by the Eclipse warranty. First adjust the unit s arms and level the front bar to the desired height. Make sure the Center Support is centered on a fabric seam - DO NOT shift the Center Support away from a fabric seam. Adjusting the Center Support: Extend the awning half way Slightly loosen the six, 4mm Allen screws (three on each side) that lock the black PVC cradle in place. Rotate the PVC cradle so that the fabric is rolling out directly from the center of the opening. Tighten the six, 4mm screws. Roll the unit all the way in and extend fully to make sure the fabric is not coming in contact with the cradle. Fabric MUST roll out the CENTER of the PVC cradle - not making contact 4mm Allen screws IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT OUR TECH DEPARTMENT AT /12

7 ECLIPSE & Eclipse Cross Arm

8 ECLIPSE & Eclipse Cross Arm

9 ECLIPSE & Eclipse Cross Arm

10 ECLIPSE & Eclipse Cross Arm

11 ECLIPSE & Eclipse Cross Arm

12 ECLIPSE

13 Eclipse Awning Components Eclipse Awning & Eclipse Cross Arm version 1/10 Eclipse Wall Install Bracket # Eclipse End Bracket # , Eclipse Soffit Install Bracket # , 40mm Center Support # , Available Colors White, Camel & Bronze Eclipse End Bkt Covers # EC SHROUD sold as a pair Torsion Bar End Caps - 40mm # sold as a pair Eclipse Shoulder right # R left # L, complete Eclipse Cross Arm Shoulder (left only) # , Eclipse Shoulder 13 Projection ONLY right # R left # L, complete Eclipse Cross Arm Wrist # , Eclipse Wrist # , Hood Side Cover # , Eclipse Front Bar # Hood Bracket # , Eclipse Front Bar End Caps # sold as a pair in four colors Hood Profile #

14 Eclipse Awning Components - Cont. Eclipse Awning & Eclipse Cross Arm version 1/10 Available Colors White, Camel & Bronze 78mm Roller Tube # to 11-6 projection Torsion Bar 40mm # mm Roller Tube # RP projection only Hood Splice Kit # sold complete 78mm Pivot Gudgeon # Eclipse Front Bar Splice Kit # sold complete 70mm Pivot Gudgeon # Eclipse 9 Roof Mount Bracket # ECRMB sold complete 78mm Gear End Gudgeon # Pivot End Bushing # mm Gear End Gudgeon # Build Out Plate for Install Bracket 0.50 Thickness # BOP Eclipse Arm - Right 5-0 # R 7-4 # R 9-0 # R 10-6 # R 11-6 # R 13-0 # R Eclipse Arm - Left 5-0 # L 7-4 # L 9-0 # L 10-6 # L 11-6 # L 13-0 # L For other items note listed, please see common family components

15 ECLIPSE SC (semi cassette) ECLIPSE SC PROFILE Eclipse SC profile with wall mount application. ECLIPSE SC PROFILE #2 Eclipse SC profile with soffit mount application. Eclipse SC Data up to 22 wide Fabric is completely protected (excluding optional valance) 6 projection ranges from 5 0 to 13 0 Wall, soffit or roof mounting options Hardware available in White, Camel & Bronze Utilizes Eclipse arms with ABT 10 year warranty Override motor available - use Sunea RTS CMO motor Ideal for roof mount application Optional Lunar Lighting & Solar Beam Heaters are available

16 Eclipse SC Awning Components Eclipse SC Awning (Semi Casette) version 1/10 Eclipse Wall Install Bracket # Eclipse SC Cast End Bracket # , Eclipse Soffit Install Bracket # , Eclipse SC Cassette Support # , Available Colors White, Camel, & Bronze Eclipse End Bkt Bottom Covers # sold as a pair Torsion Bar End Caps - 40mm # sold as a pair Eclipse End Bkt Cover Discs # sold as a pair Eclipse SC Plastic Sleeve Insert # Eclipse Shoulder right # R left # L, complete Torsion Bar 40mm # Eclipse SC Wrist # , Eclipse 9 Roof Mount Bracket # ECRMB sold complete Eclipse SC Front Bar # Pivot End Bushing # Eclipse SC Front Bar End Caps # sold as a pair in four colors For Arms: please refer to the Eclipse Component page. Call for Roller Tube, Gudgeon, etc.

17 Common Components All Eclipse Awnings version 1/10 Ball-Style Crank 4-7 # 512F # 512F # 512F # 512F093 Eye & Pin For 1:7 & 1:13 Gear # 418E sold as a each Hook-Style Crank 3-11 # # # :1 Gear # 418F select color PVC Spline # :1 Gear # 417F select color Touch-Up Paint Stick # ALK201 select color 1:3 Beveled Gear # 409F select color Touch -Up Spray Can # ALK200 select color CMO Override Stem # , Telis One Transmitter # Telis One Patio Transmitter # Telis Four Transmitter # Telis Four Patio Transmitter # Decoflex RTS One Switch white # ivory # sold complete Decoflex RTS Five Switch white # ivory # sold complete