Cam roller guide LF12S complete axis

Transcription

1 Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto strut profile xl Incl. toothed belt drive; additional notes on the drive concept (p. -) F y max F z max M x max M y max M z max v max M max 3500 N 000 N Nm 1,0 x Nm 1, x Nm 5 m/s Nm L 3 x +6 M max Nm L H ,5 1, L H Technical data See pages -5 for notes on layout and drive Complete axis L H / LF1S +50 L H / L H / 10 00

2 Linear guides MGE. -1 Cam roller guide LF1S components 1 E F Components for the individual assembly of cam roller guides, with or without drive Parts list for cam roller guide LF1S without drive 3 G M N Component No. Qty. Page Profile xl / 1-6 B Guide profile LF1S / D B O H C C Guide rod LF / -1 D Cover profile LF1S / 1-1 E Profile x / 1 - F Cover cap x G Guide bearing LF H Cover cap xl M Cylinder bolt DIN 9 Mx n 1) N T-nut M, mm slot 3 5 n 1) O Sliding block 3 16 n 1) -1 1) For identification see page E L M K J Parts list for cam roller guide LF1S with drive Component No. Qty. Page Profile xl LF LF / 1-6 B Guide profile LF1S / 1-1 C Guide rod LF / G D B O I N C D Cover profile LF1S / 1-1 E Profile x10 M1 M / 1 - G Guide bearing LF I Drive head LF1S J Return head LF1S K Toothed belt / L 3 1) 1 - L Belt connector M Cylinder bolt DIN 9 Mx n ) N T-nut M, mm slot 3 5 n ) O Sliding block 3 16 n ) -1 1) L 3 x ) For identification see page ,5 1,5 190

3 -1 MGE. Linear guides a Guide profile LF1S to hold the guide rods Installation on MGE strut profiles with mm slot or directly on a flat surface ly l z 191 a 0 3,50 kg/m 1 mm 9,60 cm 6,0 cm n x 0 L - (n x 0) a a 0...mm z y 1, 0 Guide profile LF1S 1 pcs / ccessories: aluminum, anodized 5 pcs Cylinder bolt DIN 9 Mx T-nut M, mm slot, 3 5 Sliding block, cover profile, guide rod z Cover profile to prevent contamination on threaded connections l y l z 193 0,3 kg/m mm 0,0 cm 3,0 cm y 1, 0 Cover profile LF1S / P; black Sliding block as a centering aid for mounting the guide profile in a mm profile slot Sliding block No DIN 9 - Mx 3 P; black The guide rod is pressed into the guide profile The guide rod guides the guide bearing Guide rod 0,9 kg/m LF / Solid shaft V, induction hardened and polished Condition on delivery: ungreased; greasing according to assembly instructions 3 5 6

4 Linear guides MGE. -19 Guide bearing for trolley construction Supporting bearing for brackets for bearing o-center forces Guide rail to support supporting bearings (p. -0) ,35 kg C,3 kn C 0 5,0 kn ø, 15,5 1,5 35,5,5-0, +0, Guide bearing for trolley construction Guiding via guide rod Rollers with ball bearings, permanently lubricated Lubricating felts with guide rod lubrication reservoir Play-free roller adjustment via eccentric bolts Replacement of the lubricating felts possible from rear in installed state Guide bearing No. FS 0,35 kg C dyn,6 kn C stat 5,1 kn 15,5, 1, FS1 DIN 9 Mx0 6,5,5 +0, -0, LF xfs1 Housing: Die-cast aluminum Roller: steel, hardened, polished Scope of delivery: incl. fastening material (FS) Condition on delivery: lubricating felts ungreased; greasing according to assembly instructions Supporting bearing for brackets for bearing o-center forces For support on the guide rail Rollers with ball bearings, permanently lubricated Lubricating felts with guide rod lubrication reservoir Play-free roller adjustment via eccentric bolts Replacement of the lubricating felts possible from rear in installed state FS Supporting bearing No. FS DIN 9 Mx0 LF xfs Housing: Die-cast aluminum Roller: steel, hardened, polished Scope of delivery: incl. fastening material (FS) Condition on delivery: lubricating felts ungreased; greasing according to assembly instructions

5 -0 MGE. Linear guides Guide rail to hold supporting bearings DIN 91 - M6X Guide rail L LF / L steel, hardened, polished Condition on delivery: ungreased; greasing according to assembly instructions ccessories: cylinder bolt DIN 91 M6x16 T-nut M6, mm slot (3 5 5) ø11 ø6,6 a 3,00 kg/m 0099 a 0 n x 0 L L - (n x 0) a a...60mm

6 Linear guides MGE , øh H,5 31,3 Ph 5 0 Drive head for transferring drive torque to a toothed belt For direct mounting of a motor or (in conjunction with a center shaft) for mounting a hollow shaft gear or a coupling (p. -6) Mounted directly on profile by using longitudinal end connector (connector included in scope of delivery) Profile finishing: LF blind hole drilling for longitudinal end connector Pb,5 kg P b x P h : xl Drive head No. FS LF1S xfs3, xfs Scope of delivery: Drive head: aluminum, anodized Cover caps: P, black Hollow shaft: steel; galvanized incl. fastening material (FS), cover caps FS3 ISO Mx0 FS ISO 035 M , Ph 0 Return head for tensioning the toothed belt and changing its direction Mounted directly on profile by using longitudinal end connector (connector included in scope of delivery) Profile finishing: LF blind hole drilling for longitudinal end connector Return head No. FS LF1S 3 56 xfs3, xfs Scope of delivery: aluminum, anodized Hollow shaft: steel; galvanized Caps: P; black incl. fastening material (FS), cover caps Pb 3,5 kg P b x P h : xl FS3 ISO Mx0 FS ISO 035 M

7 - MGE. Linear guides 5 5,,5 Belt connector suitable for trolley built out of strut profiles x10 ll connecting parts included for mounting on the profile end (LF1S) or in the slot (LF1C) Profile finishing for strut profile x10 for trolley LF1S: M ,6 kg 10 Belt connector No. FS LF xfs5, xfs6, xfs, xfs, xfs9 aluminum, painted black Scope of delivery: incl. fastening material (FS) FS5 FS6 FS FS DIN9 M1x0 DIN 9 Mx DIN 15, DIN 991 Mx ø1x FS9 øxø5x11 Toothed belt as a trolley drive,5 Pitch: T Toothed belt L 3 0,1 kg/m LF / L 3 1) ) L 3 x L 3 n x mm PU with embedded steel wires