4 243 Hinge Pr detent for nested door. Material: Hinge Parts: zinc die, black coated
|
|
- Louisa Thomas
- 5 years ago
- Views:
Transcription
1 4 243 Hinge Pr detent for nested door Heavy Duty Detent Hinge with an opening angle of 180 and latching positions at -5, 85 and 175. The negative latching position can keep the door firmly shut even against a rubber seal. Beginning of compression at a position of approx. 5. Material: Hinge Parts: zinc die, black coated DIRK GmbH Königsfelder Str. 1 D Ennepetal Phone:+49 (0) Fax: +49 (0) Hinges 04/12/2010 copyright by DIRK / Germany Part No. Hinge
2 4 701 Torque Hinge Pr for nested door 270 hinge with constant torque throughout its full range of motion. The object (door, monitor) may be moved into any position and with remain. Without any engagement. Springback typically < 1 Constant torque throughout its fully range of motion. Life of > cycles RH and LH application. pplications: Office Equipment, Medical Devices, Computer Peripherals, Flat Panel Monitors, cces Panels, Industrial Enclosures, Equipment Guards. Fastening: for example with M4 screw DIN-EN-ISO 4762 Material: Housing: zinc die, black coated Shaft and torque clips: hardened steel DIRK GmbH Königsfelder Str. 1 D Ennepetal Phone:+49 (0) Fax: +49 (0) Hinges 04/12/2010 copyright by DIRK / Germany Version Nm Part No. Torque Hinge 1, * Torque Hinge 2, * Other NM, surfaces and special solutions on request. * Price and delivery time on request 06.38
3 4 702 Torque Hinge Pr for nested door 270 hinge with constant torque throughout its full range of motion. The object (door, monitor) may be moved into any position and with remain. Without any engagement. Springback typically < 1 Constant torque throughout its fully range of motion Life of > cycles RH and LH application. pplications: Office Equipment, Medical Devices, Computer Peripherals, Flat Panel Monitors, cces Panels, Industrial Enclosures, Equipment Guards. Fastening: for example with M4 screw DIN-EN-ISO 4762 Material: Housing: zinc die, black coated Shaft and torque clips: hardened steel Hinges 04/12/2010 copyright by DIRK / Germany DIRK GmbH Königsfelder Str. 1 D Ennepetal Phone:+49 (0) Fax: +49 (0) Version Nm Part No. Torque Hinge 1, * Torque Hinge 2, * Other Nm, surfaces and special solutions on request. * Price and delivery time on request 06.39
4 4 703 Torque Hinge Pr for nested door 270 Hinge with constant torque throughout its full range of motion. The object (door, monitor) may be moved into any position and with remain. Without any engagement. Springback typically < 1 Constant torque throughout its fully range of motion Life of > cycles RH and LH application. pplications: Office Equipment, Medical Devices, Computer Peripherals, Flat Panel Monitors, cces Panels, Industrial Enclosures, Equipment Guards. Fastening: for example with M8 screw DIN-EN-ISO 4762 Material: Housing: P Shaft and torque clips: hardened steel Hinges 04/12/2010 copyright by DIRK / Germany DIRK GmbH Königsfelder Str. 1 D Ennepetal Phone:+49 (0) Fax: +49 (0) Version Nm Part No. Torque Hinge 1, * Torque Hinge 2, * Other Nm, surfaces and special solutions on request. * Price and delivery time on request 06.40
5 4 704 Torque Hinge Pr for nested door hinge with constant torque Material: throughout its full range of motion. The Frame part and Door part: object (door, monitor) may be moved zinc die, black coated into any position and with remain. Shaft and torque clips: Without any engagement. hardened steel Springback typically < 1 Constant torque throughout its fully range of motion Life of > cycles pplications: Office Equipment, Medical Devices, Computer Peripherals, Flat Panel Monitors, cces Panels, Industrial Enclosures, Equipment Guards. Fastening frame part: for example with M4 screw DIN-EN-ISO 4762 Fastening door part: for example with M4 countersunk screw DIN-EN-ISO DIRK GmbH Königsfelder Str. 1 D Ennepetal Phone:+49 (0) Fax: +49 (0) Hinges 04/12/2010 copyright by DIRK / Germany Version clockwise counter clockwise Part No. Torque Hinge LH (as drawn) 5.00Nm 3.25Nm * Torque Hinge RH 3.25Nm 5.00Nm * * Price and delivery time on request 06.41
6 4 707 Torque Hinge Pr for nested door hinge with constant torque throughout its full range of motion. The object (door, monitor) may be moved into any position and with remain. Without any engagement. Springback typically < 1 Constant torque throughout its fully range of motion Life of > cycles pplications: Office Equipment, Medical Devices, Computer Peripherals, Flat Panel Monitors, cces Panels, Industrial Enclosures, Equipment Guards. Fastening: for example with M4 screw DIN-EN-ISO 4762 Material: Frame and Door part: zinc die, black coated Shaft and torque clips: hardened steel DIRK GmbH Königsfelder Str. 1 D Ennepetal Phone:+49 (0) Fax: +49 (0) Hinges 04/12/2010 copyright by DIRK / Germany Version clockwise counter clockwise Part No. Torque Hinge 5.00Nm 3.25Nm * Torque Hinge 3.25Nm 5.00Nm * * Price and delivery time on request 06.42
7 4 708 Torque Hinge Pr for nested door 270 Hinge with unchanging torque throughout its full range of motion. Continuously adjustable torque 0 5Nm. The adjustment of the torque is made with a hexagon socket key size 4 in the hinge shaft. The doors may be moved into any position and remain at exactly that position. lso usable as coverstays for light duty application. Installation with hexagon screws or hexagon nuts M6. Without any stop. djustable torque Constant torque throughout its fully range of motion RH and LH application. pplications: shutters, doors protection devices, cover for industrial enclosures, HVC, electrical industry, machine tools and instrumentation. Material: Hinge and covers: P, black Pin: stainless steel DIRK GmbH Königsfelder Str. 1 D Ennepetal Phone:+49 (0) Fax: +49 (0) Hinges 04/12/2010 copyright by DIRK / Germany Version Nm Part No. Torque Hinge
8 4 709 Torque Hinge Pr for nested door 270 Hinge with unchanging torque throughout its full range of motion. Continuously adjustable torque 0 5Nm. The adjustment of the torque is made with a hexagon socket key size 4 in the hinge shaft. The doors may be moved into any position and remain at exactly that position. lso usable as coverstays for light duty application. Installation with hexagon screws or hexagon nuts M6. Without any stop. djustable torque Constant torque throughout its fully range of motion. RH and LH application. pplications: shutters, doors protection devices, cover for industrial enclosures, HVC, electrical industry, machine tools and instrumentation. Material: Hinge and covers: P, black Pin: stainless steel DIRK GmbH Königsfelder Str. 1 D Ennepetal Phone:+49 (0) Fax: +49 (0) Hinges 04/12/2010 copyright by DIRK / Germany Version Nm Part No. Torque Hinge
9 Hinges / Hinges with dual function Small friction hinge - adjustable Small size friction hinge to maintain a panel in position. The friction torque is adjustable with a hex key. full product data sheet is available on our website. B C D S part number material finish weight alu 6060 T5 raw 10g alu 6060 T5 black anodised 10g alu 6060 T5 clear anodised 10g (S) 10.5 B 21 D 15 C Large friction hinge - adjustable Large size friction hinge to maintain a panel in position. The friction torque is adjustable with a hex key. vailable with a choice of studs or holes. full product data sheet is available on our website. B C D note part number material finish weight fixing with M6 screw alu 6060 T5 clear anodised 66g fixing with M6 screw alu 6060 T5 black anodised 66g fixing with M6 studs alu 6060 T5 clear anodised 78g fixing with M6 studs alu 6060 T5 black anodised 78g Ø 6.3 C 9.5 B 38 D 48 Ø La solution charnières et verrouillages
10 La solution charnières et verrouillages Hinges / Hinges with dual function Hi-Klik detent hinge Indented every torque values. Torque is preset. full product data sheet is available on our website. B C D torque part number material finish weight N.m alu 6060 T5 black anodised 106g N.m alu 6060 T5 black anodised 106g N.m alu 6060 T5 black anodised 106g Ø 6.3 C 9.5 B 38 D 48 Ø Detent plastic hinge Holds door leaves in 4 different positions (90 each). Maximum door weight : 1.2kg/pair. 303 stainless steel pin. full product data sheet is available on our website. B part number material finish weight polyacetal ivory 30g polyacetal black 30g B x 4 Ø
11 Hinges / Hinges with dual function Hinge with stop at 115 B C part number material finish weight stainless steel polished 122g B C Ø Hinge with stop at 60 Suitable for mounting on glass doors B C D part number material finish weight stainless steel gloss 140g B Ø (D) (C) M La solution charnières et verrouillages
12 La solution charnières et verrouillages Hinges / Hinges with dual function Hinge with stop at 90 Die-cast steel hinge with removable brass pin Stop at 90 The same hinge is available without stop (part number ) C D part number material finish weight stainless steel harshed 350g D C 6 60
13 CONCEPTION ET FBRICTION DE PIÈCES SPÉCILES SUR DEMNDE 6. CHRNIÈRES À FRICTION TORQUE HINGES DREHMOMENT SCHRNIERE CHRNIÈRES À FRICTION TORQUE HINGES DREHMOMENT SCHRNIERE numéro number Nummer matière material Werkstoff décor finish Dekor poids weight Gewicht MÉCNISME À FRICTION TORQUE MECHNISM x B x C x D x I 30 x 35 x 3 x 8 x alu SG brut 10g alu SG anodisé noir 10 g alu SG anodisé 10 g incolore 15 B * Percée et fraisurée pour vis ø I * Drilled and counter sunk for screws ø I * Gebohrt und versenkt für Schrauben ø I I0,5 I0,5 C ø (I)* ø D
14 78 CHRNIÈRES À FRICTION TORQUE HINGES DREHMOMENT SCHRNIERE numéro number Nummer matière material Werkstoff décor finish Dekor poids weight Gewicht x B x C x D 65 x 55 x 4,5 x alu SG anodisé 66 g incolore alu SG anodisé 66 g noir Fixation par vis CHC M6 Fixture with screws socket head M6 Befestigung mit Innensechskantschraube M6 2,5 ø D C x B x C x D 65 x 55 x 4,5 x alu SG anodisé 78 g incolore alu SG anodisé 78 g noir Fixation par goujons M6 Fixture with skids M6 Befestigung mit Stift M6 4 x M6 15 B Caractéristiques sur demande Characteristics on request Technische Daten auf Wunsch 9,5 48 CHRNIÈRE ENCLIQUETBLE Door positioning hinge Rastscharnier x B x C x D 65 x 55 x 4,5 x 13 new alu SG anodisé incolore Encliquetage tous les 30 Positioning each 30 Raststellungen bei jeweils 30 nouveau neu 38
15 Torque hinge adjustable This torque hinge range is meant for articulating and holding a panel or door with no additional hardware thus simplifying design and saving installation time. Main features: Reduced dimensions djustable holding torque with the aid of a setting screw Good corrosion resistance Suitable for flush/nested door Suitable for RH and LH doors Exists in 2 dimensions (65 and 30) Fixing by screws or studs Custom made hinges, please ask us Friction hinge and pplication examples: door panels industrial display seat headrest vehicles interior trimming Etc. Material: aluminium, anodised (clear or black) or raw aluminium cartridge: POM (polyacetal resin) setting screw: stainless steel washers: P (polyamide), white or black studs: steel, zinc plated, white or black Friction hinge and Part numbers: and version and version and version version 30 Other hinges with additional features: see our catalogue. Friction hinge and
16 Torque hinge adjustable Ø for M6 screw Ø 3.5 for c'sk screw M3 Ø 10.2 Ø M6 Ø 10 total swing of total swing of 180 Scale: 1/2 Scale: 1/2 Friction hinge version 65 (dimensions) Friction hinge version 30 (dimensions) Part numbers Fixing Finish With holes Clear anodised With holes Black anodised With studs Clear anodised With studs Black anodised Part numbers Fixing Finish With holes Clear anodised With holes Black anodised With holes Raw Other information: Holding torque: 0 to 500 Ncm maximum * Setting screw torque: 200 Ncm maximum Setting key: hex 4 (not supplied) Tensile strength: 6,000 N Shear strength: 5,000 N Recommended temperature range: -20 C +80 C Fixing screws: according to DIN 912 * static range at room temperature Other information: Holding torque: please ask us Setting screw torque: please ask us Setting key: hex 2.5 (not supplied) Tensile strength: 2,240 N Shear strength: 1,050 N Recommended temperature range: please ask us Fixing screws: according to DIN 7991 * static range at room temperature Subject to technical changes Pinet Industrie 9, rue de l Etang Parc international d activités Paris Nord 2 BP Roissy Charles de Gaulle Cedex France Tél. : 33 (0) Fax : 33 (0) SS au capital de RCS Bobigny et SIRET B Code NF : 286 F
. Ball catch and counterpart: brass or brass, chrome plated
www.dirak.com 6-130 Dual Ball Catch Material:. Ball catch and counterpart: brass or brass, chrome plated. Spring: stainless steel Ball: stainless steel chrome Ball catch Counterpart Assembly brass plated
More informationMaterial: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated
4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt
More information180 Polyamide Hinge Page. for single cabinets. 180 polyamide hinge with self - securing pin. RH or LH application.
180 Polyamide Hinge for single cabinets Page 4-145 180 polyamide hinge with self - securing pin. RH or LH application. Material: Door- and frame part: P, black Pin: DELRIN, natural color Part No. 212-9101
More information4 100 Concealed Hinge Pr02 90
4 100 oncealed Hinge Pr02 90 oor bending 20mm for nested door 90 oncealed Hinge for RH or LH application. The 2 main hinge parts have a central guide to prevent door sagging during adjustment. Material:
More informationTelescopic Cover Support
6-170.01 Telescopic Cover Support long, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely,
More informationINDEX - ALUMINIUM RANGE HINGES. profile 0.35 N.m. FinAlu continuous hinge 466. profile 0.70 N.m. Aluminium profile continuous hinge - 50 mm
LUMINIUM RNGE INEX - LUMINIUM RNGE HINGES Finlu continuous hinge 466 luminium profile continuous hinge - 50 mm Rolled knuckle continuous hinge - 20 mm width Rolled knuckle continuous hinge - 25 mm width
More information1-103 Slide Shoe for Cams
1-103 Slide Shoe for Cams Slide shoe for cams, 2 parts, consisting of housing and latch. Matching cams as of 35 mm, steel product system 1.102 and stainless steel product system 7-080, in combination with
More information4-393 Concealed Hinge Pr02 120
4-393 Concealed Hinge Pr02 120 Lift-off, for nested door, snap-in Concealed Hinge for nested door. Can be applied both at the top and at the bottom of the door. Small space requirement. simple clip-in
More informationSlam-Cam Page. Material: a) Slam-Cam: zinc die, chrome plated Spring: steel, zinc plated Washer: Teflon
Slam-Cam Page 1-264 Slam-Cam for Slam Doors. Locking without key or tool. To a): The Teflon washer replaces the wave washer underneath the insert. Used with all Quarter- Turns and inserts according to
More informationHinges. Concealed hinges. Concealed hinge 90 opening
oncealed hinges oncealed hinge 90 opening Pins and links in 430 stainless steel Mounting features: - For nested doors or surface mounted doors. - LH or RH options. - For horizontal or vertical applications.
More informationQuarter-Turn Pr20.1 L18
1-100.01 Quarter-Turn Pr20.1 L18 for cutout 20.1, length 18, low profi le 15 Nm IP 65/67 Specially low profile Quarter-Turn. RH or LH application. This Quarter-Turn consists of three basic parts which
More informationHINGES Weld-on Hinges Steel. Weld-on Hinges Steel. MATERIAL Steel. FINISH Raw. FEATURES Brass Washer Steel Pin Grease Nipple
47 48 Weld-on Hinges 7004.00 Raw Brass Washer Pin Grease Nipple Weld-on Hinges 7010.00 Raw Brass Washer Pin 49 Weld-on Hinges 7005.00.080, 7005.00.100 Raw Brass Washer Brass Pin Grease Nipple 7005.00.080
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More informationTorque hinges. Art.:
hinges hinges Art.:6871 Art.:6875 Art.:6871.04 Art.:6871.05 Art.:6876 Art.: 150.SK-T-ZA Art.: 150.SK-T-ZA Art.: 150.HG-TA Art.: 150.HG-IT MC Art.:150.SF-TH Art.:150.HG-TS Art.:150.HG-ITS Art.:150.HG-ITM
More informationVisual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page
NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More informationMETTEC DESK CASES DESK CASES
METTEC DESK CASES DESK CASES Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages. Stand: 11/98 e Copyright 1998 OKW Gehäusesysteme KG Germany
More informationWeld-on Hinges Weld-on Hinges
54 53 Weld-on Hinges 7004.00 Satin Brass Washer Pin Grease Nipple Weld-on Hinges 7004.90 Aluminium Satin Stainless Washer Stainless Pin Grease Nipple 55 Weld-on Hinges 7005.00.080, 7005.00.100 Satin Brass
More informationSOCLA pneumatic actuator
Summary Sales leaflet p.2 Technical description p.3 Dimension p.4 Interfaces p.5-8 Applications and main characteristics Objective : Socla pneumatic actuators are designed to meet the demanding needs of
More informationMedical equipment castors NEW!
Medical equipment castors R H O M B U S NEW! 357 a 357 h Swivel castor without brake Swivel castor with total brake 357 r Swivel castor with directional brake 2 Technical description Sheet steel metal
More informationB Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationInjection Oilers, Micro Pumps
Injection Oilers, Micro Pumps 1-5012-4-US for minimal quantity metering Magnetic piston pump Injection oiler Micropump Grease metering P Metering pumps deliver and meter out lubricants. This piston pumps
More informationPNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
More informationCabinet & Drawer Hardware
www.crh.com.au SOLUTIONS FOR TRADE Cabinet & Drawer Hardware November 2017 www.crh.com.au SOLUTIONS FOR TRADE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19
More informationPULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
More informationTABLE OF CONTENTS SERIES 40
TABLE OF CONTENTS SERIES ALUMINIUM PROFILES SERIES PAGE Technical data and profile cross-sections 2.4-2.17 Processing of profiles for connectors 2.1-2.19 Prices of aluminium profile processing 2. Aluminium
More informationALUMINIUM PROFILE SYSTEM SERIES 40
ALUMINIUM PROFILE SYSTEM SERIES With the basic grid mm (slot 5); mm (slot 6), 16mm, mm and 0mm (slot ). In addition to this, the complete connection technology and a large range of accessories. TABLE OF
More informationStandard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
More informationStandard Machine Elements Worldwide
Standard Machine Elements Worldwide 2 GN 473 Foot clamp mountings Aluminium GN 480.1 Retaining rods Retaining tubings Stainless Steel Pictorial index GN 474 Two-way clamp mountings Aluminium page 5 GN
More informationPanic exit devices with integrated latch: Push bars and touch bars complying with EN 1125
DOOR technology order catalogue Panic exit devices with integrated latch: Push bars and touch bars complying with EN 1125 Panic exit devices with integrated latch in compliance with EN 1125 Table of contents
More informationFür Modellreihen / for Series / pour les séries
Montage- und Betriebsanleitung Installation and operating instructions Instructions de montage et d utilisation D F Member of JOST-World Für Modellreihen / for Series / pour les séries RO i850 B RO i860
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationov-shoulder_screws_divider - Updated Shoulder Screws
ov-shoulder_screws_divider - Updated - 09-01-2017 Shoulder Screws Product Overview & Shoulder Bolts Steel shoulder screws These are our least expensive option. They are produced to ISO 7379 standards.
More informationMH3. Door Stops (Floor Mounts) Door Stops (Wall Mounts) Door Holders (Door Mounts)
CH-202NS...MH20 DB-008...MH11 DB-036a...MH11 DC-011...MH23 DC-018...MH21 DC-063...MH23 DC-070...MH12 DG-106N...MH21 DG-109...MH21 DG-110...MH21 DG-111...MH21 DP-042...MH23 DP-042L...MH23 DS-003...MH 4
More informationFasteners. for tipper and car trailers. Fasteners for tipper and car trailers. F. Hesterberg & Söhne GmbH & Co. KG
Fasteners for tipper and car trailers Fasteners for tipper and car trailers F. Hesterberg & Söhne GmbH & Co. KG Heilenbecker Straße 50-60 D-58256 Ennepetal Phone +49 2333 794 0 Fax +49 2333 794 192 www.hestal.de
More informationay Manifold Mounted KHP3K
3-Way ay Manifold Mounted Ball Valves KHP3K up to 500 bar up to DN 32 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, FLUTEC 3/2-way manifold mounted ball valves are units for shutting off and diverting
More informationBlue-Tip Screwbolt BT
Blue Tip Screwbolt hex head, white zinc plating BT Blue Tip Screwbolt hot dipped galvanised, white zinc plating BT-HDG Blue Tip Screwbolt hex head, stainless steel BT-SS Blue Tip Screwbolt countersunk
More informationSUPPORT ALU. Aluminium Support ECA ERA EMST ETS.
www.easy-conveyors.com SUPPORT ALU ECA ERA EMST ETS Aluminium Support The conveyors are held in place by a well balanced range of support components, with beam support brackets, support beams, feet, etc.
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationCOMPETENCE COMPONENTS FOR HVAC APPLICATIONS: SYSTEM SOLUTIONS! NEW DEVELOPMENTS
COMPETENCE COMPONENTS FO HVC PPLICTIONS: SYSTEM SOLUTIONS! The Klimaflex line of products is designed for HVC applications, fulfilling the strict requirements for housings of air conditioning, ventilation
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationRotary Medium Stylized wing 1.6 (.06) 1.3 (.05) 19 (.73) 48 (1.89) 1.6 (.06) 1.3 (.05) 18 (.71) 47 (1.85)
K Draw Latch Rotary Medium Stylized wing 1.6 (.06) 6.4 (.5) 9 (1.13) Stainless steel or steel, black powder coated Performance Details Steel: Max. working load: 130 N (75 lbf) Stainless steel: Max. working
More informationModel Stroke, Two Handle Push Pull Control Head
Model 2009 3 Stroke, Two Handle Push Pull Control Head This control is available with three different handles; standard, handles with plastic grips or curved handles with knobs. An optional clutch and
More informationILG-D Series Cast Iron Housing Declutchable Gear Operators
ILG-D Series Gear Operators The Rotork Gears ILG-D gear operators are designed to provide a means of manually overriding pneumatic valve actuators in power and process applications. These gear operators
More informationACCESSORI PER VENEZIANE KOMPONENTEN FÜR JALOUSIEN ACCESSORIES FOR VENETIAN BLINDS COMPOSANTS POUR STORES A LAMELLES ACCESORIOS PARA VENECIANA
ACCESSORI PER VENEZIANE KOMPONENTEN FÜR JALOUSIEN ACCESSORIES FOR VENETIAN BLINDS COMPOSANTS POUR STORES A LAMELLES ACCESORIOS PARA VENECIANA ACCESSORI PER AVVOLGIBILI KOMPONENTEN FÜR ROLLLADEN ACCESSORIES
More informationDynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationNIS NAV AM (MY15 >) - Aluminium Tonneau Cover ATC0051 (silver) ATC0052 (Black) Installation Time: Approx. 60 Minutes WARNING!
Installation Time: Approx. 60 Minutes WARNING! When in the closed position, Aluminium Tonneau Cover must be latched and tailgate must be closed. Failure to do so could result in unexpected opening of the
More informationNumber of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
More informationfor flatbed superstructures
for flatbed superstructures VarioSystem for flatbed superstructures F. Hesterberg & Söhne GmbH & Co. KG Heilenbecker Straße 50-60 D-58256 Ennepetal Phone +49 2333 794 0 Fax +49 2333 794 192 www.hestal.de
More informationCAM LOCKS CAM LOCK DD-CC ZAMAK - CHROME DD-CC ZAMAK - BLACK COATED DD-CC PLASTIC C C D D. web
063 LOCK ø 063 1-1-DD-CC ZAAK - CHROE 063 1-2-DD-CC ZAAK - BLACK COATED 063 2-0-DD-CC PLASTIC Quarter-turn operation Body length 20.5 mm (Please be sure to order appropriate cam) Available in all die-cast
More informationPull Action Latch Clamps
6.1 Pull ction Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
More informationCode no. 61 STAINLESS STEEL 316 HINGES
Code no. 61-003 Stainless steel pin diameter 7 mm. With stainless steel washers and 6 countersunk holes for M5 screws. L 76 x 76 x 2.5 mm, pin dia = 7 mm R/H Stainless steel pin diameter 7 mm. With stainless
More informationHinge (Pull) Side Door Application DC6230 Series Multi-Sized 1 thru 6 DC6430 Series Half-Size 1 thru 6. Door Mounted DC6230 & DC6430
Installation Instructions Universal Door Closers Slide Track Application (0 Maximum Door Swing) (standard)- N.H.O. Bumper Stop A - H.O. Bumper Stop Track - Pull Side See pages 2 & Hinge (Pull) Side Door
More informationContents TRANSOM CLOSER 690 SERIES 23 LOCK OF GLASS DOOR 800 SERIES 24 AUTO HINGE 820 SERIES 25 PANIC EXIT DEVICE 910 SERIES 26
www.usaf.com.tw Contents ELECTRIC STRIKE 100 SERIES 1 E-SAVE SLIDER 171 SERIES 2 SHOWER HINGE 230 SERIES 3 SHOWER HINGE 240 SERIES 4 FREE HINGE 20 SERIES GLASS CONNECTOR 280 SERIES 6 PVC GASKET 290 SERIES
More informationASSA ABLOY Universal Door Closers
Installation Instructions For Non-Hold Open or A Hold Open Arm Options DC6200 Series DC6400 Series Multi-Sized thru 6 Half-Size thru 6 Regular Arm Parallel Arm Universal Door Closers Jamb Mount See pages
More informationAB-PR Part-turn. Keeping the World Flowing. AB-PR Part-turn Gear Series. Cast Iron Housing Gearboxes
B-PR Part-turn Gear Series The Rotork Series B-PR part-turn gear operators are rugged, industrial grade products manufactured with cast iron housing components. ll models in this series feature a polyurethane
More informationParts Book Replacement Cab Parts
Parts Book Replacement Cab Parts This parts book contains our most used items If the part you need isn t listed, please contact us Note: All parts are COD, credit card, or shipped after receiving your
More informationPIX. Operation - Replacement of Fuses Replacement of Voltage Transformers Technical manual. Medium Voltage Distribution
Medium Voltage Distribution PIX Withdrawable Voltage Transformer Operation - Replacement of Fuses Replacement of Voltage Transformers Technical manual Nr. Edition 11/2011 www.schneider-electric.com Schneider
More informationSECTION 14 - HINGES WDS
SION 14 - INS INS 14-1 to 14-3, Surface Mounted inges... 14-12 to 14-14, 14-23 to 14-24 Spring Released inges... 14-18 to 14-20 ift Off inges... 14-3 to 14-8, 14-11 orque inges... 14-21 xposed orner inges...
More informationSlide Unit Spare Parts List LE VRL SB T02 Spare parts
Slide Unit Spare Parts List LE 60- VRL SB T02 Spare parts 10 248174 1 base plate LE 60-248178 4 cover complete LE 60 R 30 248179 2 piston LE 60 251753 2 push rod LE 60-50 251716 2 locking clamp LE 60 (see
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationIMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE 2009 Toyota RAV-4 Stainless Steel Mesh Grilles L 30 G8P Fine Mesh Part #30-002-09 Quantity Description Part No. Upper Mesh Grille (includes):
More informationASSEMBLY TOOLS AND SYSTEMS. DPTC Cordless Impulse tools
ASSEMBLY TOOLS AND SYSTEMS DPTC Cordless Impulse tools w w w. d o g a. f r The range The Cordless Impulse tools with Li-ion batteries are designed for intensive industrial use. Fast and light the DPTC
More informationARM1000/2000. Standard Specifications
.5- Regulator Manifold ARM000/000 4 connection methods Standard Specifications Fluid Proof pressure Max. operating pressure Set pressure range Ambient and fluid temperature Cracking pressure (Valve) Construction
More informationDATA PD SV13.., SV14.. Levelling Valves. Product. Function. Technical Features. Range Overview
Commercial Vehicle Systems Product DATA Doc. No. Y075 (EN - Rev. 00) PD-500-000 Function On vehicles fitted with air suspension, the Levelling Valve ensures that the axle suspension air bags maintain a
More informationActuators for air dampers and control valves of oil burners
7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100
More informationHandbook for Industrial Applications CATALOGUE SUPPLEMENT 2016 / Locks Latches Handles Hinges Sealing profiles Miscellaneous Stainless products
Handbook for Industrial Applications CATALOGUE SUPPLEMENT 0 / 07 Locks Latches Handles Hinges Sealing profiles Miscellaneous products CONTENT ONE PHILOSOPHY. MANY SOLUTIONS. About Industrilas Page - WWW:
More informationDEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029
DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte
More informationRittal CM Compact System Enclosures
Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details... 3 5 Compact system enclosures
More informationSection 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
More informationSystems for Floor-Mounted, Back Outlet Toilets, 2x6 Installation
Geberit Flushing System Systems for Floor-Mounted, Back Outlet Toilets, 2x6 Installation GEBERIT FLUSHING SYSTEM Concealed Tank, Sigma 2x6 Installation Model No. Description List Price 109.304.00.5 Sigma
More informationHinges. Various hinges. Stainless steel hinge with removable pin. Removable pin hinges with nylon washers. Removable pin.
Stainless steel hinge with removable pin Removable pin. Part number Material Finish Weight (g) 52-1-3877 304 stainless steel gloss 60 94.5 1.5 4 50 ø 6 ø 5 20 42 10 45 () 74.5 5.5 Removable pin hinges
More information14 Rückschlagklappen. Swing check valves Clapet de non retour
02 01 14 Rückschlagklappen Swing check valves Clapet de non retour 99 17 16 15 14 13 12 03 04 11 10 09 08 07 06 05 Rückschlagklappen - Swing check valbe - Clapet de non-retour 14.01Rückschlagklappe F6
More informationFlanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
More informationRemoving and installing trim panel
Removing and installing trim panel vw-wi://rl/a.en-gb.a03.5106.29.wi::31914802.xml?xsl=3 1. oldal, összesen: 1 oldal Removing and installing trim panel Removing Carefully prise out trim panel -1- in direction
More informationa s s e m b l y t o o l s a n d s y s t e m s Pneumatic Screwdrivers DS Series w w w. d o g a. f r
a s s e m b l y t o o l s a n d s y s t e m s Pneumatic Screwdrivers DS Series w w w. d o g a. f r Range *DSL Series 150 W forward and reverse screwdrivers Shut-off clutch Straight, pistol, angle head
More informationSystems for Wall-Hung Toilets for Sigma 2x6 Installation
GEBERIT INSTALLATION SYSTEMS Geberit Installation Systems Systems for Wall-Hung Toilets for Sigma 2x6 Installation Geberit Duofix Carrier, Sigma 2x6 Installation Model No. Description List Price 111.335.00.5
More informationProduct Datasheet. 2. GRP large rain canopy. 3. GRP door. 4. G.I Mounting plate. 5. G.I Gland plate. 6. EPDM rubber gasket
POLYESTER ENCLOSURE SINGLE DOOR Product Datasheet GRP Single Door Enclosures are used for outdoor application with weatherproof and antistatic properties, finding their major application in the protection
More informationDICTATOR Door Checks
DICTATOR Door Checks Ensure Doors to Close Quietly. Doors can be incredibly noisy. Not only when people slam them, but also due to air pressure, gusts of wind and inadequate door closers. The more violent
More informationBTS Accessories. Floor Spring Accessories
BTS Accessories Floor Spring Accessories Floor spring accessories Single action aluminium doors For single action aluminium doors Aluminium door straps 2 For flush-closing single action aluminium doors
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationStirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
More informationINOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
More informationMedical Equipment Castors.
Medical Equipment Castors www.rhombus-castors.com Index Medical Equipment Castors Series 367 page 3 Series 390 page 6 Series 399 page 9 2 Series 381 page 4 Series 391 page 7 Access ories page 10 11 Series
More informationAB-PR Part-turn. Keeping the World Flowing. AB-PR Part-turn Gear Series. Cast Iron Housing Gearboxes
B-PR Part-turn Gear Series The Rotork Series B-PR part-turn gear operators are rugged, industrial grade products manufactured with cast iron housing components. ll models in this series feature a polyurethane
More informationBTS Accessories. Floor Spring Accessories
BTS Accessories Floor Spring Accessories Floor spring accessories Single action aluminium doors For single action aluminium doors Aluminium door straps 2 For flush-closing single action aluminium doors
More informationApplications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches
FEET PA 00.0 076/ 0 - PA, grey - Anti-skid insert NBR - All bolts are suitable for all plates Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors
More informationACCESS SOLUTIONS. NEW PRODUCTS OVER
OVER 250 NEW PRODUCTS ACCESS SOLUTIONS Search our range of over 2000 RoHS and REACH compliant parts, and find your industry solution across cabinet manufacturing, machine building, power generators, HVAC,
More informationLocking System. White Paper
Locking System White Paper Contents Introduction...4 Easy Integration...4 Benefits...4 Floor standing Mild steel...5 Floor standing Stainless steel... 10 Floor standing Aluminum... 15 Wall mounted Mild
More informationProduct Datasheet. Cable TV Junction Box (Page 4)
JUNCTION BOX Product Datasheet Junction Box Bolted Type (Page 2) Cable TV Box (Page ) Cable TV Junction Box (Page 4) Telephone Box (Page 5) Telephone Junction Box (Page 6) GRP Junction Box Enclosures are
More informationProduct features & Overview. N1 - N4 A Rotary and part-turn actuators
Product features & Overview N1 - Rotary and part-turn actuators 20 N1 - Rotary and part-turn actuators Rotary and part-turn actuators Product features Wide torque range Wide selection of output shafts
More informationASSEMBLY TOOLS AND SYSTEMS. DPTC Cordless Impulse tools
ASSEMBLY TOOLS AND SYSTEMS DPTC Cordless Impulse tools w w w. d o g a. f r The range The Cordless Impulse tools with Li-ion batteries are designed for intensive industrial use. Fast and light the DPTC
More information422 Series. Cam Action Door Closer
Cam Action Door Closer Copyright SARGENT Manufacturing Company 2005-2018. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is
More informationCut out PRODUCT CODE HANDLE BODY FINISH MATERIAL MODUL. 5 mm Double bit 8 mm Square 9 mm Triangular Button. Stainless steel dust cap (Keyed alike) 03
ROD-LATCH SYSTEM LINEAR HANDLE LOCK 204 V : 1 With mechanism Cut out Ergonomic and modern design Locking and unlocking by linear movement Suitable for inside & outside gasketing applications Swing handle
More informationCam-action door closer DORMA TS 97
Cam-action door closer DORMA TS 97 DORMA TS 97 Cam-action door closer A perfect combination of form and function With its new model TS 97, DORMA is able to offer the smallest surface-mounted cam-action
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationSLC Guard locking safety switch. The new generation of safe mechanical guard locking switches
SLC Guard locking safety switch The new generation of safe mechanical guard locking switches Surely. Exactly the right solution. With machines, it is imperative to ensure that there is no access or entry
More information